kia sportage dashboard install
DESCRIPTION
how to install new media centerTRANSCRIPT
APPLICATIONS
INSTALLATION INSTRUCTIONS FOR PART 99-7344
WIRING & ANTENNA CONNECTIONS (Sold Separately) Wiring Harness: • 70-7304 Hyundai Kia harness 2010-upAntenna Adapter:• Not Required
• Panel removal tool • Phillips screwdriver
TOOLS REQUIRED
Kia Sportage 2011-up99-7344G
99-7344CH
B C D EA
• A) Radio housing trim panel • B) DDIN Radio housing brackets • C) Pocket • D) (4) Panel clips • E) (4) Phillips truss head screws
KIT FEATURES
KIT COMPONENTS
• ISO DIN head unit provision with pocket• Painted Gray or Charcoal to match factory finish
G=Gray, CH=Charcoal
1. Remove the screw in the instrument panel to the right of the “engine start” button then unclip the top panel of the steering column then unclip and remove the instrument panel. (Figure A)
2. Remove the screw in the dash panel above the glove box to the right of the radio then unclip and remove the dash panel. (Figure B)
3. Remove the two screws from the from the radio panel, unclip and remove. (Figure C)
Continued on next page
Kia Sportage 2011-up
Dash Disassembly 95-7344
(Figure A)
(Figure B)
(Figure C)
Dash Disassembly 95-7344
Kia Sportage 2011-up
(Figure D)
(Figure E)
4. Unscrew the 4 Phillips screws securing the radio into the dash, unplug and remove the radio. (Figure D)
5. Remove the four screws securing the display into the factory panel and unclip the hazard button. Both items will need to be installed into the 95-7344 kit panel. (Figure E)
Continue to kit preparation
Display Screws
Hazard button
99-7344
1. Install the hazard button and display previously removed from the factory radio panel. (Figure A)
2. Attach the four included panel clips to the radio panel. (Figure A)
Continue to kit assembly
Kit Preparation
(Figure A)
Display Screws
White plastic clips
White plastic clips
Hazard button
Kit Assembly 99-7344
ISO DIN head unit provisions
(Figure A)
(Figure B)
(Figure C)
1. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation.
2. Mount the pocket to the DDIN brackets using the supplied (4) screws. (Figure A)
3. Mount the radio to the DDIN brackets/pocket assembly with the screws supplied with the unit. (Figure B)
4. Mount the radio/bracket assembly into the dash. (Figure C)
5. Snap the radio trim plate over the radio/pocket assembly and reassemble dash in reverse order of disassembly. (Figure C)
APLICACIONES
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-7344
• Herramienta de remoción de panel • Destornillador Phillips
HERRAMIENTAS REQUERIDAS
Kia Sportage 2011 y mas99-7344G
99-7344CH
B C D EA
• A) Panel de moldura para carcasa de radio • B) Soportes DDIN de carcasa del radio • C) Bolsillo • D) (4) Ganchos del panel • E) (4) Tornillos Phillips cercha la cabeza
CARACTERÍSTICAS DEL KIT
COMPONENTES DEL KIT
• Provisión de unidad central doble ISO DIN con bolsillo• Pintada en color gris o gris oscuro para igualar el acabado de fábrica G = gris, CH = gris oscuro
CABLEADO Y CONEXIONES DE ANTENA (se venden por separado)Arnés de cableado: • 70-7304 - Arnés para Hyundai Kia 2010 y más recientesAdaptador de antena:• No se requiere
1. Quite el tornillo del panel de instrumentos a la derecha del botón de “arranque de motor” y luego desenganche el panel de arriba de la columna de dirección, desenganche y quite el panel de instrumentos. (Figura A)
2. Quite el tornillo del panel del tablero arriba de la guantera, a la derecha del radio, y desenganche y quite el panel del tablero. (Figura B)
3. Quite los dos tornillos del panel del radio, desenganche y quite. (Figura C)
Continúa en la página
Kia Sportage 2011 y mas
Desmontaje del tablero 95-7344
(Figura A)
(Figura B)
(Figura C)
Desmontaje del tablero 95-7344
Kia Sportage 2011 y mas
(Figura D)
(Figura E)
4. Desatornille los 4 tornillos Phillips que sostienen el radio en el tablero, desconecte y quite el radio. (Figura D)
5. Quite los dos tornillos que sostienen la pantalla en el panel de fábrica y desenganche el botón de las luces intermitentes. Las dos cosas deben instalarse en el panel del kit 95-7344. (Figura E)
Continuará la preparación del kit
Mostrar los tornillos
Peligro botón
99-7344
1. Instale el botón de las luces intermitentes y la pantalla que quitó del panel del radio de fábrica.
2. Una los cuatro ganchos del panel que se incluyen con el panel del radio.
Continuará al ensamble del kit
Preparación del kit
Abrazaderas de plástico blanco
Peligro botón
Abrazaderas de plástico blanco
Mostrar los tornillos
Ensamble del kit 95-7344
ISO DIN head unit provisions
(Figura A)
(Figura B)
(Figura C)
1. Ubique el arnés del cableado de fábrica en el tablero. Metra recomienda usar el adaptador de acoplamiento adecuado de Metra o AXXESS. Vuelva a conectar el terminal negativo de la batería y pruebe la unidad para verificar que funcione correctamente.
2. Montar el bolsillo a los soportes DDIN mediante el cable (4) tornillos. (Figura A)
3. Montar la radio a los soportes de montaje DDIN o de bolsillo con los tornillos suministrados con la unidad. (Figure B)
4. Montar el conjunto con de la radio/ soporte en el salpicadero. (Figura C)
5. Coloque la placa de moldura sobre de conjunto de la radio/soporte y volver a montar el tablero en orden inverso al de desmontaje. (Figura C)
METRA ACCESSORIES STEREO DASH KITS