Technical Datasheet 03-2017

Knauf Hammer Fixings Hammer Fixings are light duty fixings which have a special thread lock design that prevents pre -expansion during transit installation and provides an option for faster fixing without screwdriver work. Both sizes are suitable for perimeter fixings for both partitions and ceilings. In addition to that, 8x45 mm is perfectly suitable with universal bracket in wall claddings .

Base Materials:

Installation Data

Features:

FIX

Knauf Hammer Fixings Material, fields of Application, Properties

concrete C20/25

solid brick 15 MPa

aerated concrete 600 MR V

PLUG: Polypropylene PP or Polyamide (Nylon) PA 6.6

SCREW: electro zinc plated steel ~10 μm

Fixing of wooden elements and drywall systems, etc.

SIZE 6 x40 mm ( 200 Pcs / Pack)

8x 45 mm 100 / Pack

8 x 45 mm (100 Pcs / Pack ) Plug diameter [mm] 5 6 8 10 12 14 Hole diameter [mm] 5 6 8 10 12 14 Hole diameter in fixture [mm] 6 7 9 11 13 15 Minimum hole depth [mm] 35 40 50 60 70 80 Effective embedment depth [mm] 25 30 40 50 60 70 Minimum substrate thickness [mm] 55 60 70 80 90 100 Minimum spacing [mm] 25 30 40 50 60 70 Minimum edge distance [mm] 25 30 40 50 60 70

Hammer Fixing Drill mm Pull Out 6 x 40 mm 6 100 Kg 8 x 45 mm 8 150 kg

Knauf Head Office

The constructional and structural properties, and characteristic building physics Knauf system can solely be ensured with the exclusive use of Knauf system components, or other product expressly recommended by Knauf.

Knauf Manufacturing PlantKnauf Qatar Office

www. .ae

P.O.Box 27111Doha, State of QatarTel: +974 44528191Fax: +974 44528181

Phone: +971 4 337 7170

Fax: +971 4 334 9659

P.O. Box: 112871, Dubai

info@knauf.aeThe information provided in this leaflet is only intended to give guidance in selecting and using Knauf products. While we make every effort to ensure its accuracy, neither Knauf LLC and its branchesnor any of this employees or affiliates warrant or assume any legal liability or responsibility for the completeness or usefullness of any failure in installation or constructing structure installation or builidingor caused by using this leaflet. Readers are adviced to independently verify this information prior to reply on it. In particular, readers must obtain appropriate independent advice on the use of products in specific structures, installations or buildings to ensure compliance with all regulations, in cluding health and safety regulations. Knauf reserves the right to amend technical specification without notice.

P.O.Box 50006Ras Al Khaimah, U.A.E.Tel: +971 7 221 5300Fax: +971 7 221 5301

Made in UAE

mailto:info@knauf.aemailto:info@knauf.ae