fibre cement external claddings - bunnings...
TRANSCRIPT
Fibre Cement
External Claddings
THE OFFERA fibre cement cladding offer that suits all residential and
commercial applications consisting of:
- Modern & lightweight external fibre cement products
- Traditional / Contemporary fibre cement products
- External Claddings
- Internal Linings
- Flooring
- Eave Linings
Leading Brands
- Free Plan Take off available upon request (BGC only)
- Free technical support
- Delivery to Site
Weatherboards
- Linea
- Two widths (150mm / 180mm)
- 16mm thick with deep shadow lines
- Easy to install back bevelled boards
- Pre-primed
- Concealed fixing
- Joined off stud
- Nuline
- Two widths (175mm / 205mm)
- 14mm thick, 4200mm long
- Square and Bullnose profiles
- Easy to install
- Level joining system which gives a
seamless finish
Modern & Lightweight
External Fibre Cement
Geometric or Grid
Application
- Matrix
- A flat, smooth panel installed to create a
geometric, expressed joint look
- 4 panel sizes, sealed on all 6 sides
- Easy to install
- Pre-primed sheets
- No Joining or Rendering required
- Duragrid
- Smooth flat surface with square edge
finish
- 9mm thick (11.7kg/m2)
- Varying widths and lengths available
- Easy to install
- No Joining or Rendering required
Modern & Lightweight
External Fibre Cement
Grooved Panel
- Axon
- Vertically grooved panel
- Two groove width patterns (133mm /
400mm)
- 3 sheet sizes
- Shiplap joint enables easy installation
- Pre-primed
- No joining or rendering required
- Duragroove
-3 profiles available
- Smooth Narrow (100mm)
- Smooth Wide (150mm)
- Woodgrain Wide (150mm)
- Varying lengths available (1200mm wide)
- Shiplap joint enables easy installation
- No joining or rendering required
Modern & Lightweight
External Fibre Cement
Vertical Cladding
-
Durascape
- Gives a subtle vertical shadow line
- 9mm thick
- Two widths available (900mm / 1200mm)
- Two lengths available (2450mm /
3000mm)
- Easy to install
Modern & Lightweight
External Fibre Cement
Horizontal Cladding
- Stria
- Wide board with 15mm horizontal joint
- Two widths available (325mm / 405mm)
- Joined on or off stud
- Pre-primed
- Easy to cut mitred corners mean
horizontal lines wrap corners easily
Modern & Lightweight
External Fibre Cement
STONESHEET- BASE SHEET
• Can hold a maximum tile weight of 40kg per
m2
• Can be installed on steel or timber framing
•Panels are not affected by termites, air, steam,
salt or sunlight.
•Quick and simple to install using manual
nailing, gun nailing or screw fixing
•Can be used in bushfire zones and boundary
wall applications.
BGC Stonesheet is a flat, square edged sheet and is manufactured in 3000x1200x9mm thick
panels.
BGC Stonesheet has rough key face to encourage tile grip and incorporates a unique fixing
method
Weatherboards
- Primeline
- 4 profiles (Summit, Newport, Heritage,
Chamfer)
- Pre-primed
- Hardiplank
- 4 profiles (Woodgrain, Smooth, Old Style,
Rusticated)
- Duraplank
- 3 profiles (Rusticated, Smooth, Woodgrain)
- 7.5mm thick, 4200mm long
- 3 widths (205mm rusticated, 230mm /
300mm smooth and woodgrain)
Traditional Fibre Cement
External Cladding
Panels
- EasyLap
- Shiplap vertical joint that is finished on-
site with a roll-on textured acrylic paint
- No Joint or Rendering required
- Panel Clad
- Pre-textured sheet in two styles (Stucco
and TextureLine)
- Used for feature walls or gable ends
- Easy installation
- No Joint or Rendering required
- Duragroove Woodgrain
- 150mm wide
- Varying lengths available (1200mm wide)
- Shiplap joint enables easy installation
- No Joint or Rendering required
Traditional Fibre Cement
External Cladding
- Harditex
- Pre-primed base sheet that is finished
on-site
- Ready to Render
- Duratex
- Two thicknesses available (7.5mm /
9mm)
- Varying lengths and widths available
- Ready to Render
Traditional Fibre Cement
External Cladding Textured Base Sheets
- Hardiflex
- Smooth flat sheet
- Square edges enable fast installation
- Two thicknesses available (4.5mm /
6.0mm)
- Durasheet
- Two thicknesses available (4.5mm /
6.0mm)
- Varying widths and lengths
- Square edge
Traditional Fibre Cement
External Cladding Standard Fibre Cement
- Hardiflex
- Smooth flat sheet
- Square edges enable fast installation
- Two thicknesses available (4.5mm /
6.0mm)
- Durasheet
- Two thicknesses available (4.5mm /
6.0mm)
- Varying widths and lengths
- Square edge
Traditional Fibre Cement
External Lining Eave Lining
Compressed Sheet
- Hardipanel
- Structural flooring substrate for ceramic
tile finishes over timber or lightweight steel
floor joists
- Compressed Flooring
- High density
- Suitable for wet areas
- Can be used for cladding external
decking
- 3 thicknesses (15mm / 18mm / 24mm)
- Varying widths and lengths available
Traditional Fibre Cement
Flooring
What is it?
•An external structural flooring substrate.
•Used over timber or steel floor joists
•A substrate for ceramic tile finishes
•It gives piece of mind against moisture
damage to balconies
Where do I use it?
•An external substrate for tiled residential
balconies.
•Its a great alternative to particle board,
plywood or compressed fibre cement.
Scyon Secura exterior flooring
What is it?
•A heavy duty but lightweight internal structural
flooring substrate.
•Used over timber or steel floor joists
•A substrate for tiles, vinyl and carpet
•The easiest way to get top protection against
moisture damage in all interior floors
Where do I use it?
•Residential interiors including general areas
and wet areas
•Its a great alternative to particle board, plywood
or compressed fibre cement.
Scyon Secura interior flooring
Ceramic Tile Underlay
- Ceramic Tile Underlay
- Used in wet or dry areas, on top of
internal timber, particleboard and plywood
substrates, and under ceramic tiles
- Pre-sealed to improve moisture
resistance
- Suitable for underlay nail guns
- Ceramic Tile Floor Underlay
- Can be installed over new or existing
floorboards
- Used in wet and dry areas
- 1800 x 1200 x 6mm
- 900mm or 1200mm widths available
Traditional Fibre Cement
Flooring
- Vinyl and Cork Underlay
- Can be used on top of internal timber,
particleboard and plywood substrates
- Large sheets come with pre-marked
nailing pattern
- Suitable for underlay nail guns
- Vinyl and Cork Underlay
- 5mm x 1200mm x 900mm
- Square edge
- Provides a smooth base on which to lay
vinyl or cork flooring
Traditional Fibre Cement
FlooringVinyl and Cork Underlay
Groove Panel Smooth
- Hardigroove
- Flat sheet with vertical V-shaped
grooves carved into its face
- Sheet edges are finished with a half
groove
- Duragroove
- 3 profiles available
- Smooth Narrow (100mm)
- Smooth Wide (150mm)
- Woodgrain Wide (150mm)
- Varying lengths available (1200mm wide)
- Shiplap joint enables easy installation
Internal Linings
Groove Panel Woodgrain
- Pine Ridge
- Timber textured
- Can be joined off stud
- Duragroove Woodgrain
- 150mm wide
- Varying lengths available (1200mm wide)
- Shiplap joint enables easy installation
Internal Linings
Flat Sheet Internal Lining
- Versilux
- Pre-sanded and pre-sealed sheet with
square edges for butt joints
- Duralux
- 3 thicknesses available (4.5mm, 6mm
and 9mm)
- Varying widths and lengths
- General purpose building board
Internal Linings
Internal Lining Wet Area
- Villaboard
- Flat sheet with long edges recessed for
flush jointing
- Sanded smooth
- Can be painted, wall papered or tiled
- Greater tile adhesion than plasterboard
- Wet area or high traffic liner
- Duraliner
- Can be used as part of fire and acoustic
rated wall systems
- Wet area liner
- 6mm or 9mm thickness
- Varying widths and lengths available
Internal Linings
Plan Take Off
The Process
Email or drop off building plan to Bunnings Rep
Select Fibre Cement product options from BGC or Innova Range
Bill of quantities will be provided to
Bunnings
A Bunnings Trade Rep will present a
quotation for review and approval by
Builder
Builder to raise an order with Bunnings
Trade as per quotation
Order is placed
Delivery of order to Site as per agreed date by Bunnings
- Specify products and email plan
- Bill of quantites provided
- Order placed
- Delivery organised
- Traditional Hand Unload and Carry
- Specialist Crane Truck
- Delivery costs will be included in your quote
Crane truck upon request
BGC Plan Take-Off, Quotes and Delivery
Sample Bill of Quantities
Technical Support
Contact your Bunnings Rep for all of your technical questions for
On-site support can be arranged upon request
CAN WE HELP?
Bunnings welcome the opportunity to quote your next job.
Please contact your local Bunnings representative or call 133 062.