8/10/2019 JUNOGts

1/1

Juno-G128-Voice Synthesizer

TurboStart

TBS 241 2006 Roland Corporation U.S. www.RolandUS.com

Welcome

Congratulations on your purchase of the RolandJUNO-G. This TurboStart contains step-by-stepinstructions that will quickly introduce you theJUNO-Gs major features.

Selecting Patches

Use the following procedure to select patches:1. In the MODE area, press the PATCH button so it

lights.2. Press the desired Patch Category button under

the display so it lights.3. Turn the VALUE dial at the right of the display to

choose a patch from the selected category.

Transposing the KeyboardUse the following procedure to transpose thekeyboard by octaves:1. Press OCTAVE UP or DOWN to shift the

keyboard up or down by octaves.2. Press OCTAVE UP and DOWN simultaneously

to turn transposition off.

Use the following procedure to transpose thekeyboard by half steps:1. While holding TRANSPOSE, press:

OCTAVE UP to make the notes played onthe keyboard go up a half-step.

OCTAVE DOWN to make notes played onthe keyboard go down a half-step.

2. Press OCTAVE UP and DOWN simultaneouslyto turn transposition off.

Playing the Demo Songs

Heres how to listen to the demo song:1. In the EDIT area, press SONG so its lit.2. Press the WRITESAVE/LOAD button.3. Press the WORLD button beneath the display to

select Load Song+Smpls.4. Press VOCAL/PAD (LOAD).5. Press VOCAL/PAD (EXEC).6. Press PLAY in the SONG RECORDER area.7. Press AUDIO TRACK in the same area to

display the audio tracks.8. Mix the demo as desired using the four TRACK

faders.9. Press STOP when youre finished.

Clearing the Demo Song

Use the following procedure to clear the demo song:1. In the EDIT area, press SONG so it lights.3. Press MENU so it lights.3. Press the GUITAR button beneath the display to

select SONG CLEAR.4. Press VOCAL/PAD (EXEC).

RecordingThe JUNO-G has a 16-track sequencer. Use thefollowing steps to record a few tracks:1. In the MODE area, press PERFORM so it lights.2. Turn the VALUE dial to select PRST:002

Seq:Template.3. Press the BRASS button beneath the display to

select PARTVIEW.4. Turn the VALUE dial to select a patch for the first

track of your recording.5. Press the SONG RECORDER areas REC

button so it flashes.

Note : If you want to silence the metronome, pressTEMPO in the SONG RECORDER area, and then

press the BRASS button beneath the display. PressVOCAL/PAD beneath the display to close theTEMPO menu.

6. Press PLAY to begin recording.7. Hold STOP and press BWD when youre

finished.8. Press the ! button to select your next track.9. Turn the VALUE dial to select a patch for the

second track of your recording.10. Press REC, and then PLAY to begin recording.

Note : While recording your next track, you will belistening to the first track you recorded.

11. Hold STOP and press BWD when yourefinished.

12. Press PLAY to listen to your recorded tracks.

13. To record additional tracks, repeat Steps 7-12.