jsg industrial systems general line catalogue … · jsg industrial systems general line catalogue...
TRANSCRIPT
quality industry solutions
JSG Industrial SystemsGENERAL LINE CATALOGUE 2016
For all your service, repair & maintenance needs.
High quality hand tools &equipmentwhich guarantee performance.
JSG INDUSTRIAL SYSTEMS
In 1921, the foundation of the John Sample Group of companies
commenced as the automotive aftermarket supplier to the emerging
Australian automotive manufacturing industry. Through those early
days, the John Sample Group became involved in many different
products and delivering brands such as:
� Mann Piston Rings
� Federal Mogul Bearing
� Blackhawk Hand Tools and Hydraulic Equipment
� Porto-Power Hydraulic Equipment
� Hoyts Dashboard Ammeters Instruments
� Van Cleef Bros Automotive Chemicals
� Fitzgerald Gaskets
The following decades saw the emergence of products manufactured
by the John Sample Group. Brands such as:
� Gee Jay Works products
� Vane Electrical Instruments
� Auto Lab Test Instruments
They also represented Bradbury Hoists.
Today, JSG Industrial systems is proud to offer world class
products manufactured from trusted European and North American
equipment brands such as Faicom, All-Flo, GPI Lubrication and
Metering, Lincoln and Mityvac.
This General Line catalogue offers products typically found in
workshops, maintenance sheds and fluid handling applications; in
industries such as Automotive Servicing, Fuel, Agriculture, Food and
Beverage Manufacturing and MRO.
All the products listed are stocked locally, supplied locally and
supported locally through our JSG branch offices and an extensive
regional distribution network.
GREASE 4
Grease Nipples / Trico Spectrum Grease Identification
5
Manual Grease Guns 6
Grease Gun Fittings & Accessories/ Single Point Lubricators
7
Electric Grease Guns 8
Electric Grease Guns Accessories 9
Grease Pump Layout / Pneumatic Piston Grease Pumps
10
Grease Pump Kits / Grease Pump Covers & Follower Plates
11
Grease Pump Accessories / Grease Meters / Pump Air Supply Accessories
12
Grease Hose Reels / Hose Reel Accessories 13
OIL 14
Trico Spectrum Oil Containers & Nozzle Lids 15
Trico Spectrum Accessories / Industrial Fast Funnel
16
Manual Oil Pumps 17
Electric Oil Pumps 18
Air Operated Diaphragm Pumps 19
Oil Pump Layout 20
Pneumatic Piston Oil Pump Kits 21
Pneumatic Piston Oil Pumps / Oil Pump Accessories
22
Oil Control Valves & Meters / Pump Air Supply Accessories
23
Oil Hose Reel / Hose Reel Accessories 24
Desiccant Breathers 25
WASTE OIL 26
Air Operated Diaphragm Pumps 27
Waste Oil Pneumatic Piston Pump / Mobile Waste Oil Drains
28
FUEL 29
Diesel Pump Layout / Electric Diesel Pumps 30
Electric Diesel Pumps Kits 31
Air Operated Diaphragm Pumps 32
Fuel Filters / Fuel Nozzles 33
Fuel Meters 34
Faicom Hose Reels / Hose Reel Accessories / Hand Fuel Pumps
36
WATER & CHEMICAL 37
Water & Chemical Pump Layout / Water & Chemical Pumps
38
Air Operated Diaphragm Pumps 39
Water Meters 40
Chemical Meters 41
Air, Water & Chemical Hose Reels / Hose Reels Accessories
42
Chemical Hand Pumps / Pump Air Supply Accessories / Nozzles
43
ADBLUE 44
Adblue Pump Layout / Adblue Pump Kits 45
Adblue Pump / Adblue Meters 46
Adblue Nozzles & Hoses / Adblue Hose Reels 47
ELECTRICAL & CABLE MANAGEMENT 48
Electrical Supply Reels / Faicom Curtain Cable Reels Gleason Static Discharge Reels
49
Gleason Cable-Master Reels / Gleason Series “S” Spring-Driven Electric Cable Reels / Gleason “C” Track Festoon Systems
50
Gleason PowerTrak® / Gleason Ergonomic Tool Balance Reels
51
MITYVAC 52
Cooling System Testing & Diagnostic Equipment 53
Engine Diagnostic Equipment 54
Specialty Tools & Equipment / Fluid Evacuation & Dispensing Equipment
56
Brake & Clutch Bleeding Equipment 57
Hand Vacuum Pumps 59
Accessories 61
FIRE EXTINGUISHERS 62
Portable / Automatic & Trolley Mounted 63
Extinguisher Servicing 64
Portable Extinguisher Support & Accessories 65
QUICK REFERENCE 66
Piston & Electric Pumps 67
Electrical Supply Reel 68
Diaphragm Pumps 69
Hose Reels 70
CONTENTS
4 JSG Industrial Systems | General Line Catalogue
GREASE
Grea
se
5Quality Industry Solutions | www.jsgindustrial.com
GREASE
Grease Nipples
Popular grease nipples supplied in convenient packs of 10. Manufactured from Cad plated steel.
PART NUMBER HEAD TYPE THREAD SIZE THREAD TYPE ORIENTATION
04-12LA165 Grease Nipple 6mm Metric 90°
04-12L161 Grease Nipple 6mm Metric Straight
04-12LA169 Grease Nipple 8mm Metric 90°
04-12L162 Grease Nipple 8mm Metric Straight
04-12LA204 Grease Nipple 10mm Metric 90°
04-12L200 Grease Nipple 10mm Metric Straight
04-12L028 Grease Nipple 1/8” NPT Straight
04-12LA043 Grease Nipple 1/8” NPT 90°
04-12L029 Grease Nipple 1/8” BSP Straight
04-12LA044 Grease Nipple 1/8” BSP 90°
04-12LA060 Grease Nipple 1/4” BSP 90°
04-12L048 Grease Nipple 1/4” BSP Straight
04-12LA059 Grease Nipple 1/4” NPT 90°
04-12L047 Grease Nipple 1/4” NPT Straight
04-12LT046 Button Head 1/8” BSP Straight
04-12LT326 Button Head 1/4” NPT Straight
04-12LT52 Button Head 1/4” BSP Straight
Grease Nipples - Pack of 10
Trico Spectrum Grease Identification
Avoid grease cross contamination and misapplication with spectrum grease nipple identification caps and grease gun identification bands. Trico grease fitting caps available in packs of 10.
Trico Grease Fitting Caps
YELLOW GREEN RED BLUE PURPLE ORANGE
07-37024 07-37025 07-37026 07-37027 07-37041 07-37058
Trico Grease Gun Bands
YELLOW GREEN RED BLUE PURPLE ORANGE
07-37036 07-37037 07-37038 07-37039 07-37044 07-37056
Trico Grease Fitting Caps
Trico Grease Gun Bands
Grea
se
6 JSG Industrial Systems | General Line Catalogue
Grease Guns
Manual Grease Guns.
The choice of mechanics and industrial maintenance professionals everywhere. Lincoln grease guns are designed for rough treatment on the job.
PART NUMBER CARTRIDGE SIZE
PRODUCT DESCRIPTION
01-G120 400g Lincoln Guardian Single Shot Air Grease Gun Max. 4800 psi delivery pressure
01-001162 400g Lincoln Air Operated Grease Gun Max. 6000 psi delivery pressure, ergonomic handle
01-001132 400g Lincoln Pistol Grip Grease Gun With 127mm whip hose and coupler
01-001133AUS 450g Lincoln Heavy Duty Pistol Grip Grease Gun One hand operation, 18” whip hose and coupler
01-001133 400g
01-001134 400g Lincoln Heavy Duty Pistol Grip Grease Gun Jam proof handle. With coupler, 457mm whip hose and 152mm rigid extension
01-001142AUS 450g Lincoln Heavy Duty Lever Grease Gun Rigid nozzle, bulk fill or grease cartridge
01-001142 400g
01-001148 400g Lincoln Deluxe Lever Gun With comfort vinyl grip and purging valve. Dual output for either high pressure or volume
01-001147 400g Lincoln Heavy Duty Lever Grease Gun With 457mm whip hose and coupler
01-001151 600g Bulk Lincoln Bulk Lever Gun Bulk fill 600g barrel with rigid pipe and coupler
Clear Grease Guns and Grease Tubes
01-001100CLR 400g Lincoln Clear Tube Conversion Kit Tube only. For easy conversion from Lincoln 400g steel tubes.
01-001107CLR 400g Lincoln Clear Tube Kit Tube only. For easy conversion of many competitor models.
01-001142CLR 400g Lincoln Lever Gun with Clear Tube Grease gun with high strength clear tube
01-001148CLR 400g Lincoln Deluxe Lever Gun with Clear Tube Grease gun with high strength clear tube
01-001134CLR 400g Lincoln Pistol Gun with Clear Tube Grease gun with high strength clear tube
Lincoln Heavy Duty Lever Grease Gun
Lincoln Heavy Duty Pistol Grip Grease Gun
Lincoln Heavy Duty Lever Grease Gun
Lincoln Bulk Lever Gun
Lincoln Heavy Duty Pistol Grip Grease Gun
Lincoln Clear Grease Tube
Lincoln Pistol Grip Grease Gun
Lincoln Guardian Single Shot Air Grease Gun
Lincoln Deluxe Lever Gun with Clear Tube
Lincoln Air Operated Grease Gun
Lincoln Deluxe Lever Gun
Lincoln Lever Gun with Clear Tube
Lincoln Pistol Gun with Clear Tube
Grea
se
7Quality Industry Solutions | www.jsgindustrial.com
Guardian 18” x 1/8” NPT Hose Extension with Guard
Guardian Heavy Duty Grease Coupler 1/8”
Lincoln Flexible Grease Hose 30"
SKF System 24 Single Point Lubricator
Grease Gun Fittings & Accessories
High quality grease gun accessories to meet all of your requirements.
PART NUMBER PRODUCT DESCRIPTION
01-G212 Guardian 12” x 1/8” NPT Hose Extension Working pressure 3500 psi, burst pressure 14000 psi
01-G218 Guardian 18” x 1/8” NPT Hose Extension Working pressure 3500 psi, burst pressure 14000 psi
01-G218S Guardian 18” x 1/8” NPT Hose Extension with Guard
Working pressure 3500 psi, burst pressure 14000 psi
01-G907 Guardian Grease Filler Nipple 1/8” NPT Bulk fill grease guns
01-G300 Guardian 1/8” Standard Grease Coupler Suitable for most grease guns, 1/8” NPT, knurled body for ease of handling
01-G310 Guardian Heavy Duty Grease Coupler 1/8” NPT
Knurled body for ease of handling
01-001230 Lincoln Flexible Grease Hose 30" Working Pressure 3500psi, burst pressure 14000 psi
01-001236 Lincoln Flexible Grease Hose 36" Working Pressure 3500psi, burst pressure 14000 psi
Single Point Lubricators
Ready-to-use straight from the box. Tool-free activation and time-setting allow easy and accurate adjustment of lubrication flow.
PART NUMBER CARTRIDGE SIZE PRODUCT DESCRIPTION
SKLAGD125/WA2 125g SKF System 24 Single Point Lubricator Gas Driven, 1 to 12 months dispense rate. Multi-purpose EP type grease for conveyors, electric motors, pumps & fans.
SKLAGD125/HP2 125g SKF System 24 Single Point Lubricator Gas Driven, 1 to 12 months dispense rate. High performance polyurea for electric motors, pumps & fans.
SKLAGD125/GB2 125g SKF System 24 Single Point Lubricator Gas Driven, 1 to 12 months dispense rate. Biodegradable, low toxicity for agriculture, forestry, construction & earthmoving equipment, water treatment & irrigation.
Note: for other specification refer to JSG sales personel
Grea
se
8 JSG Industrial Systems | General Line Catalogue
Lincoln Guardian 12V DC NiCad Grease Gun
Lincoln PowerLuber Li-ion 18V DC Grease Gun
Lincoln 18V DC NiCad Grease Gun
Lincoln PowerLuber Li-ion 20V DC Grease Gun
Lincoln PowerLuber 14V DC NiCad Grease Gun
Grease Guns
Lincoln PowerLuber Electric Grease Guns.
PART NUMBER CARTRIDGE SIZE
PRODUCT DESCRIPTION
01-001882E-400 400g Lincoln PowerLuber 20V DC Li-ion Grease Gun, single battery 2 speed PowerLuber with single battery, charger and carry case. LCD screen monitors grease output and battery level. Fitted with LED work lamp.
01-001842AUS 450gLincoln PowerLuber 18V DC NiCad Grease Gun, single battery With single battery, charger and carry case
01-001842E-400 400g
01-001862AUS 450gLincoln PowerLuber 18V DC Li-ion Grease Gun, single battery
Quick recharge with single battery, level gauge, Charger and carry case01-001862E-400 400g
01-001442AUS 450gLincoln Powerluber 14V DC NiCad Grease Gun, single battery With single battery, charger and carry case
01-001442E-400 400g
01-G121AUS 450gLincoln Guardian 12V DC NiCad Grease Gun, single battery With single battery, charger and carry case
01-G121A400 400g
Grea
se
9Quality Industry Solutions | www.jsgindustrial.com
Grease Guns
Lincoln Electric Grease Gun Accessories.
PART NUMBER PRODUCT DESCRIPTION
01-G915A Lincoln Guardian 12V DC NiCaD Battery Battery to suit 01-G121AUS
01-001210A Lincoln 12V DC NiCaD Charger 230V AC 3 Pin Charger to suit 01- G121(AUS/400)
01-001215 Lincoln 12V DC NiCad Charger 12/24V DC In-Car Charger to suit 01-G121(AUS/400)
01-001401 Lincoln 14.4V NiCaD Battery Suits 01-001442AUS and 01-001442E-400
01-001801 Lincoln 18V NiCaD Battery Suits 01-001842AUS and 01-001842E-400
01-001410A Lincoln 14.4V DC and 18V DC NiCad Charger 230V AC - 11/18V DC 3 Pin Charger to suit 01-001842(AUS/E-400)
01-001815A Lincoln 18V DC NiCad Charger 12/24V DC 3 In - Car Charger to suit 01-001842(AUS/E-400)
01-001861 Lincoln 18V DC Li Ion Battery Li-ion Battery to suit 01-001862(AUS/E-400)
01-001850A Lincoln 18V DC Li Ion 230V AC Battery Charger
230V AC 3 Pin Charger to suit 01-001862(AUS/E-400)
01-001855A Lincoln 18V Li Ion Charger 12/24V DC in Car charger. Suits 01-001862AUS and 01-001862E-400
01-001871 Lincoln 20V DC Li Ion Battery Li Ion Battery to suit 01-001882(AUS/E-400)
01-001870A Lincoln 20V DC Li Ion 230V AC Battery Charger 230V AC to suit 01-001882(AUS/E-400)
01-001875A Lincoln 20V DC Li Ion Charger 12/24V DC 3 In-Car Charger to suit 01-001882(AUS/E-400)
Lincoln 20V DC Li Ion Battery
Lincoln 20V DC Li Ion230V AC Battery Charger
Lincoln 20V DC Li Ion Charger - In Car
Lincoln 18V DC 230V AC Li Ion Charger
Lincoln 18V Li-ion Charger - In Car
Lincoln 18V NiCad Battery
Lincoln 14.V4 NiCad Battery
Lincoln Guardian 12V DC NiCad Charger - In Car
Lincoln Guardian 12V DC NiCad 230V AC Charger
Lincoln Guardian12V DC NiCad Battery
Lincoln 14.4V DC & 18V DC NiCad 230V AC Charger
Lincoln 18V DC NiCad Charger - In Car
Lincoln 18V DCLi Ion Battery
Grea
se
10 JSG Industrial Systems | General Line Catalogue
Grease Pump Layout
Typical Setup – Grease dispensing setup using Grease Pump in Pail
Cover
Control ValveGrease Pump
Swivel
Follower Plate
Hose
Air Filter, Regulator, Lubricator
Pneumatic Piston Grease Pumps
The pneumatic GP72 grease pumps with a high compression ratio delivers grease at high pressure both at short and at long distances. The GPM65 is useful for where increased flows are required.
PART NUMBER DRUM COMPRESSION RATIO
DELIVERY OUTLET THREAD
TUBE Ø COVER FOLLOWER PLATE
48-GP7241 12 - 20kg 58:1 1500g/min 1/4” BSP M 30mm 48-C28 48-M27
48-GP7247 20 - 30kg 58:1 1500g/min 1/4” BSP M 30mm 48-C32 48-M30
48-GP7273 50 - 60kg 58:1 1500g/min 1/4” BSP M 30mm 48-C42 48-M40
48-GP7294 180 - 200kg 58:1 1500g/min 1/4” BSP M 30mm 48-C61 48-M59
48-GPM6594 180 - 200kg 65:1 4100g/min 1/2” BSP M 35mm 48-C6135 48-M5935Grease Pumps
Grea
se
11Quality Industry Solutions | www.jsgindustrial.com
Grease Pump Wall Kit (Reel not included)
Grease Pump Trolley Kit Grease Pump Carry Kit
Note: *Select from Faicom Hose Reel Section. Recommend up to 15m hose only.
Follower Plate
Drum Cover
Grease Pump Covers & Follower Plates
Follower plates and drum covers to suit various grease drum sizes. These are designed to assist with pump priming and prevent contamination.
PART NUMBER PRODUCT DESCRIPTION
03-FPT45 Follower Plate Suits 20 - 30kg drum, 270 - 290mm, 20 - 35mm shaft
48-M40 Follower Plate Suits AUS 60kg drum, 370 - 400mm, 30mm shaft
48-M59 Follower Plate Suits 180 - 200kg drums, 540 - 580mm, 30mm shaft
48-M5935 Follower Plate Suits 180 - 200kg drums, 540 - 580mm, 35mm shaft (GPM6594 pump)
48-C32 Drum Cover Suits 20 - 30kg grease drums, 270 - 310mm, 30mm shaft
48-C42 Drum Cover AUS Suits 50 - 60kg grease drums, 380 - 410mm, 30mm shaft
48-C61 Drum Cover Suits 180 - 200kg grease drums, 560 - 600mm, 30mm shaft
48-C6135 Drum Cover Suits 180 - 200kg grease drums, 560 - 600mm, 35mm shaft
Grease Pump Kits
Grease dispensing kits are available for portable or fixed solutions. Hose reel pump kits (HR) are designed to be combined with hose reels up to 15m length.
PART NUMBER PRODUCT DRUM COMPRESSIONRATIO
DELIVERY DESCRIPTION
48-KP7247E Grease Pump Trolley Kit 18 - 30kg 58:1 600g/min Pump, lid follower plate, trolley, hose, control valve
48-KP7247P Grease Pump Carry Kit 18 - 30kg 58:1 600g/min Pump, lid follower plate, hose, control valve
48-KP7294HR Grease Pump Wall Kit 180 - 200kg 58:1 600g/min Compatible for hose reel. Hose reel not included*
Grea
se
12 JSG Industrial Systems | General Line Catalogue
Air/Filter, Regulator and Lubricator
Faicom Rigid Grease Control Valve 1/4” BSP
Grease Hose and Coupler
Grease Pump Accessories
High quality grease accessories to match your grease pumping needs.
PART NUMBER PRODUCT DESCRIPTION
48-P14FF Flex Grease Control Valve With 400mm 'fortius' flex hose and 4 jaw coupler. 1/4” BSP F inlet
48-P14R Rigid Grease Control Valve Rigid pipe nozzle and 4 jaw coupler. 1/4” BSP F inlet
48-S14D Grease Swivel Joint 1/4” BSP M/F, suits P14FF and P14R nozzles
48-S14Z Z Swivel 1/4” BSP M/F, suits P14FF and P14R nozzles
48-T1404 Grease Hose 1/4” BSP M/M x 4m, max. 6000 psi
48-T1406 Grease Hose 1/4” BSP M/M x 6m, max. 6000 psi
48-T4GR 4 Jaw Grease Coupler M10 x 1. Suits P14 series control valves
01-000740 Lincoln Grease Gun 1/4” Inlet Rigid pipe nozzle and 4 jaw coupler. 1/4” NPT F inlet
01-083594 Lincoln 1/4” Universal Swivel Z swivel, 1/4” NPT M x 1/4” NPT M
01-081387 Lincoln 1/2” - 1/4” Swivel Z swivel, 1/2” - 27 x 1/4” NPT M
K200 Inline Meter and K200 Meter Control Valve
Grease Meters
High accuracy grease meters for high pressure pumping systems.
PART NUMBER PRODUCT ACCURACYOF READING
FLOW RANGE MAX. PRESSURE
CONNECTION
15-F0043011A K200 Inline Grease Meter
+/- 0.5% 0.1 - 2.5 kg/min 7200 psi 1/8” BSP
15-F0043100A K200 Greaster Meter Control Valve
+/- 0.5% 0.1 - 2.5 kg/min 7200 psi 1/8” BSP
Pump Air Supply Accessories
Clean, lubricated air supply to the pump will ensure a long pump life. All assemblies include gauge.
PART NUMBER PRODUCT THREAD SIZE
48-FRL12 Filter, Regulator and Lubricator 1/2” BSP
48-FRL14 Filter, Regulator and Lubricator 1/4” BSP
48-R14 Regulator 1/4” BSP
Lincoln Rigid Grease Control Valve 1/4” NPT
Lincoln 1/4” Universal Swivel
Grea
se
13Quality Industry Solutions | www.jsgindustrial.com
Grease Hose Reels*
Engineered with a robust spring canister, Faicom grease reels reliably dispense and retract hose for dispensing applications. A powder coated finish over a hot galvanised steel structure ensures the longevity of function and aesthetic appearance.
PART NUMBER SERIES MAX. HOSESIZE
MAX. HOSE LENGTH
SWIVEL INLET THREAD
OUTLET THREAD
MAX. WORKING PRESSURE
DESCRIPTION
48-V4G1415 V 1/4” 15m 1/4” BSP F 1/4” BSP M 6000 psi Suitable for grease
48-VL4G1420 VL 1/4” 20m 1/4” BSP F 1/4” BSP M 5600 psi Suitable for grease
48-VL4G3815 VL 3/8” 15m 3/8” BSP F 3/8” BSP F 5600 psi Suitable for grease
Note: *Reels include hose.
VL SeriesV Series
Hose Reel Accessories
Optional hose reel accessories for professional installation and increased function.
PART NUMBER PRODUCT DESCRIPTION
48-PFA04 Faicom 4 Reel Bracket Suitable for V, VL reels
Faicom 4 Reel Bracket
Oil
14 JSG Industrial Systems | General Line Catalogue
OIL
Oil
15Quality Industry Solutions | www.jsgindustrial.com
Trico Spectrum Oil Containers & Nozzle Lids
The Spectrum® oil containers promote a fully integrated visual lubrication management system that improves productivity and efficiency. The system enables operators to identify lubricants, while ensuring accurate and consistent delivery. The Spectrum oil container lids are available in 10 colors.
8 LITRE 11 LITRE 15 LITRE
07-34460 07-34461 07-34462
1” Nozzle Lid
Ideal for topping-off engines, crankcases, and other areas where higher flow is required.
YELLOW RED BLUE GREEN BLACK ORANGE PURPLE GREY TAN DARK GREEN
07-34420 07-34421 07-34422 07-34423 07-34424 07-34425 07-34426 07-34427 07-34428 07-34429
1/2” Nozzle Lid
Ideal for use with oils having viscosities up to ISO 460 or where precise pouring is required.
YELLOW RED BLUE GREEN BLACK ORANGE PURPLE GREY TAN DARK GREEN
07-34410 07-34411 07-34412 07-34413 07-34414 07-34415 07-34416 07-34417 07-34418 07-34419
1/4” Nozzle Lid
Ideal for controlled pouring into small reservoirs or filler holes.
YELLOW RED BLUE GREEN BLACK ORANGE PURPLE GREY TAN DARK GREEN
07-34400 07-34401 07-34402 07-34403 07-34404 07-34405 07-34406 07-34407 07-34408 07-34409
Trico Oil Containers
1” Nozzle Lid
1/2” Nozzle Lid
1/4” Nozzle Lid
Oil
16 JSG Industrial Systems | General Line Catalogue
Trico Spectrum Accessories
Pump Storage Lid
This multi-purpose lid allows rapid pouring of oils, making it ideal for topping off machinery such as crankcases or large engine blocks.
YELLOW RED BLUE GREEN BLACK ORANGE PURPLE GREY TAN DARK GREEN
07-34430 07-34431 07-34432 07-34433 07-34434 07-34435 07-34436 07-34437 07-34438 07-34439
Identification Tags
Avoid lubricant cross contamination and misapplication with spectrum tags. The spectrum tags provide a simple and fast solution for identifying lubricants from storage to point of use.
YELLOW RED BLUE GREEN BLACK ORANGE PURPLE GREY TAN DARK GREEN
07-37077 07-37075 07-37079 07-37078 07-37084 07-37076 07-37080 07-37083 07-37082 07-37081
Hand Pump
Fits directly in to Trico Spectrum lids. Ideal for awkward or hard to reach oil top-off applications such as gearboxes, lathes, and milling machines. Supplied with outlet hose and anti-drip nozzle. P/N 07-34463
Trico Spectrum Tag
Pump Storage Lid
Hand Pump
Industrial Fast Funnel
Trico’s Industrial Fast Funnels® are the simple, convenient and clean way to pour fluids into containers and equipment. Intended for one-time use, each funnel remains clean and compact until separated from the header and opened. Made of coated, heavy grade paper stock, they can be used with most lubricants and liquids and are designed to fit a wide variety of orifices as small as 3/4” in diameter.
PART NUMBER PRODUCT QUANTITY TOTAL NO. OF FUNNELS
07-36990 Industrial Fast Funnel – Standard 12 x 3 pack 36
07-36991 Industrial Fast Funnel – Large 12 x 3 pack 36Industrial Fast Funnel
Oil
17Quality Industry Solutions | www.jsgindustrial.com
OIL
Low Volume Rotary Pump
20L Hand Oil Pump
Manual Oil Pumps
Ideal for applications requiring portability and economy, manual oil pumps dispense lubricants from most bulk containers.
PART NUMBER PRODUCT DESCRIPTION
16-112930 Maspel 20L Hand Oil Pump Light to medium grade oils
16-112965 Maspel 60L Hand Oil Pump 60L drums Light to medium grade oils. Plastic body
16-112965-STEEL Maspel 60L Deluxe Hand Oil Pump 60L drums Light to medium grade oils. Steel body
01-001340 Lincoln Lever Action Barrel Pump 60/205L drums, light to medium oils. 414ml/stroke. Removeable non drip spout
01-001326 Lincoln Diaphragm Action Hand Pump 60/205L drums, light to heavy gear oils. Double acting, 475ml/stroke. With 2.4m hose and nozzle
16-152650 Maspel Low Volume Rotary Pump 60/205L drums, 330ml/revolution
16-152751 Maspel High Volume Rotary Pump 60/205L drums, 1L/revolution
01-001385 Lincoln Rotary Hand Pump 60/205L drums, light to medium oils. Internal check for constant prime
01-001387 Lincoln Rotary Hand Pump with Hose 60/205L drums, light to medium oils. Internal check for constant prime. 2.44m hose with nozzle
High Volume Rotary Pump
Lincoln Diaphragm Action Hand Pump
Lincoln Lever Action Barrel Pump
Lincoln Rotary Hand Pump with Hose
Lincoln Rotary Hand Pump
Maspel 60L Hand Oil Pump
Maspel 60L Deluxe Hand Oil Pump
Oil
18 JSG Industrial Systems | General Line Catalogue
Electric Oil Pumps
Reliable oil electric pumps suited for dispensing. DC and AC models available with some versions able to handle oils up to 5000 cSt. Available as pump only or as a kit.
PART NUMBER PRODUCT VOLTAGE DESIGN TYPE
FLUID FLOW RATE
PRESSURE INLET/OUTLET
DUTY CYCLE
DESCRIPTION
52-142100-03 L5016 Oil Pump 12 VDC Gear Oil up to 200 cSt 15 lpm 1" NPT, 3/4" BSP
30 min Incl. 3/4" ball valve, suction pipe, 2.5m hose
52-118000-9 P-200-BV Oil Pump 12 VDC Gear Oil up to 80 cSt 30 lpm 1" NPT 30 min Incl. 1" ball valve, suction pipe, 3.7m hose, 4.6m cord
15-F0031002A Viscomat 60/1 Oil Pump
24 VDC Gear Oil up to 2000 cSt 4 lpm 70 psi 1/2” BSP 30 min Pump only
52-142100-02 L5132 Oil Pump 230 VAC/ 50 Hz
Gear Oil up to 200 cSt 30 lpm 1" NPT, 3/4" NPT
30 min Incl. 3/4" ball valve, suction pipe, 2.5m hose
15-F0031001A Viscomat 60/2 24 VDC Gear Oil up to 600 cSt 10 lpm 70 psi 3/4” BSP 30 min Pump only
15-F00303M00 Viscomat 90 M 230 VAC/ 50 Hz
Vane Oil up to 500 cSt 50 lpm 1” BSP Continuous Pump only. With bypass valve
15-000303000 Viscomat 90T Pump 415 VAC/three phase
Vane Diesel,Oils up to 500 cSt
25 lpm 1” BSP F Continuous Pump only
15-F00268000 Viscomat 60/1 Pump Kit
12 VDC Gear Oil up to 2000 cSt 5 lpm 70 psi 30 min Incl. manual nozzle and 4m hose
15-F00263210 Viscotroll 120/1 Pump and Trolley Kit
12 VDC Gear Oil up to 2000 cSt 6 lpm 70 psi 30 min Incl. 4 wheel trolley, manual nozzle, battery charger, K400 digital meter
15-F0026303D Viscotroll 200/2 Pump and Trolley Kit
230 VAC/ 50 Hz
Gear Oil up to 500 cSt 9 lpm 70 psi Continuous Incl. 4 wheel trolley, manual nozzle, K400 digital meter
Viscomat 60/1 and 60/2
Viscomat Drum Pump Kit
Viscomat 90 M
Viscotroll 120/1
Viscomat 90 T
Viscotroll 200/2
L5016 Oil Pump
L5132 Oil Pump
P-200-BV Oil Pump
Oil
19Quality Industry Solutions | www.jsgindustrial.com
Air Operated Diaphragm Pumps for Oil
All-Flo Diaphragm pumps are designed for pumping oils at high volume. Rugged diaphragm materials combined with a sturdy aluminium body ensures quality construction and continuous reliability.
PART NUMBER BODY MATERIAL
FLUID CON-NECTIONS
MAX. FLOW RATE
MAX. AIR PRESSURE
NOISE LEVELS
DIAPHRAGM MATERIAL
VALVE/BALL
VALVE SEAT O-RINGS FLUIDS
51-A050-BAA-GGPN-000 Aluminium 1/2” BSP F 56.8 lpm(15 gpm)
8.2 bar(120 psi)
80 Dba (with muffler)
Geolast Geolast Polypropylene Buna-N Oils
51-A050-BAA-VVAV-000 Aluminium 1/2” BSP F 56.8 lpm(15 gpm)
8.2 bar (120 psi)
80 Dba (with muffler)
Viton Viton Aluminium Viton Oils
51-AB-10-P15 Aluminium 1” BSP 155.8 lpm (41 gpm)
8.2 bar (120 psi)
80 Dba (with muffler)
Geolast Geolast Polypropylene Nitrile Oils
51-A200-BAA-VVYV-000 Aluminium 2” BSP F 719 lpm (190 gpm)
8.2 bar (120 psi)
76 Dba (with muffler) 103 Dba (without)
Viton Viton Nylon Viton Oils
51-AN-30-P15 Aluminium 3” BSP F 965 lpm (255 gpm)
8.2 bar (120 psi)
86 Dba (with muffler)
Nitrile Nitrile Polypropylene Nitrile Oils
Note: For other specifications refer to JSG sales personnel.
1” Aluminium Body Diaphragm Pump
3” Aluminium Body Diaphragm Pump
1/2” A-Series Diaphragm Pump
2” A-Series Diaphragm Pump
Oil
20 JSG Industrial Systems | General Line Catalogue
Oil Pump Layout
Typical Setup – Oil dispensing using Oil Pump in IBC
Oil Stub Pump with Wall Mount
Pickup Tube
Hose
Control Valve
Oil Pump with Extension
Hose
Meter
Typical Setup – Oil dispensing using Oil Pump in Barrel
Oil
21Quality Industry Solutions | www.jsgindustrial.com
Pneumatic Piston Oil Pump Kits
These kits are suitable for the transfer of oil for use with tanks and 205L drums. Hose reel pump kits (HR) are designed to be combined with hose reels up to 15m length.
PART NUMBER PRODUCT DRUM RATIO DELIVERY* DESCRIPTION
48-KP41M110 Oil Pump Wall Mount Kit 205L 4:1 21L/min Hose and tank pick up
48-KPL41M110 High Flow Oil Pump Wall Mount Kit 205L 4:1 26L/min Hose and tank pick up
48-KP61M110 Oil Pump Wall Mount Kit 205L 6:1 15L/min Hose and tank pick up, high viscosity oil, long distance
48-KP61M110HR Oil Pump Wall Mount Kit 205L 6:1 15L/min Compatible for hose reel. Hose reel not included**
48-KP4194SC Oil Pump Kit 205L 4:1 10L/min Pump, hose, digital meter and valve
48-KP41OILSPI Oil Pump IBC Kit 1000L 4:1 10L/min Pump, regulator, suction tube, pump support, drip tray, 5m Hose (No control valve)
48-KP41OILSPIAV Oil Pump IBC Kit 1000L 4:1 10L/min Pump, regulator, suction tube, pump support, drip tray, hose reel support (No control valve, hose reel & hose)
Wall Mount Hose Reel Kit**Oil Pump Hose Reel**, IBC Kit***
Note: *Free flow delivery. **Refer to Faicom Hose Reel section. Recommend up to 15m only. ***Refer to Oil Control Valve and Meters section
Oil Pump Kit with MeterHigh Flow Oil Pump Wall Mount Kit
Oil
22 JSG Industrial Systems | General Line Catalogue
Oil Pump Accessories
High quality accessories from JSG Industrial Systems ensure reliability in all oil systems.
PART NUMBER PRODUCT DESCRIPTION
48-MRG10-1 Faicom Nozzle Drip Tray Powder coated finish
48-P0173 Faicom Suction Pipe, 1” BSP F Suits 50 - 60kg drums, D4117 and DP6117 stub pumps, 555mm long
48-P0194 Faicom Suction Pipe 1” with Filter Suits 180 - 200kg drums, DP4117 and DP6117 stub pumps, 765mm long
48-SG02 Faicom Pump Wall Mount Bracket Includes 2” BSP plastic lock ring, suits DP41, DP61, DPL41, DPL61, DP41NK stub pumps
48-T1205 Faicom Oil Hose 1/2” x 5m, M/F BSP ends, max. 700 psi
Faicom Oil Hose
Pump wall mount Bracket
Suction pipeNozzle Drip Tray
Pneumatic Piston Oil Pumps
Faicom oil pumps are available in stub and 205L drum versions. Designed with a double action pumping system to ensure constant delivery of oil. A unique pneumatic double-cylinder motor results in powerful and compact size. Materials have been selected to guarantee high reliability and resistance to wear and all pumps include a bung bush.
PART NUMBER PRODUCT RATIO DELIVERY* INLET THREAD
OUTLET THREAD
TUBE Ø DESCRIPTION
48-DP4117 Oil Stub Pump 4:1 21L/min 1” BSP F 1” BSP F 50mm High flow
48-DP6117 Oil Stub Pump 6:1 15L/min 1” BSP F 1/2” BSP F 42mm High viscosity oil, long distance
48-DPL6122 Oil Stub Pump 6:1 18L/min 1” BSP F 1/2” BSP M 42mm High viscosity oil, long distance
48-DPL612294 205L Oil Pump 6:1 18L/min N/A 1/2” BSP M 42mm High viscosity oil, long distance
Stub Pump
205L Pump
Oil
23Quality Industry Solutions | www.jsgindustrial.com
Oil Control Valves & Meters
Oil control valves with ergonomic handles for user comfort with extensive use. Combine with reliable and user friendly meters for accurate dispensing.
PART NUMBER PRODUCT FLOW RANGE
ACCURACY PRESSURE SPOUT SWIVEL NOZZLE TYPE DESCRIPTION
48-P12FS Faicom oil control valve 30 lpm N/A 1000 psi Flex 1/2” BSP F Swivel
Automatic Manual non drip
Control valve only
48-P12CFS Faicom oil control valve with digital meter
30 lpm +/-0.5% 1000 psi Flex 1/2” BSP F Swivel
Automatic Manual non drip
Control valve and meter
52-120000-28 GPI LM-300 7.5 - 76 lpm +/-2% 50 N/A 1” NPT N/A Meter only
Easyoil Control Valve Control Valve with Digital Meter LM-300
Pump Air Supply Accessories
Clean, lubricated air supply to the pump will ensure a long pump life. All assemblies include gauge.
PART NUMBER PRODUCT THREAD SIZE
48-FRL12 Filter, Regulator and Lubricator 1/2” BSP
48-FRL14 Filter, Regulator and Lubricator 1/4” BSP
48-R14 Regulator 1/4” BSP Air/Filter, Regulator and Lubricator
Oil
24 JSG Industrial Systems | General Line Catalogue
Oil Hose Reel*
Engineered with a robust spring canister, Faicom oil reels reliably dispense and retract hose for dispensing applications. A powder coat finish over a hot galvanised steel structure ensures the longevity of function and aesthetic appearance.
PART NUMBER SERIES MAX. HOSESIZE
MAX. HOSE LENGTH
SWIVEL INLET THREAD
OUTLET THREAD
MAX. WORKING PRESSURE
DESCRIPTION
48-MC601210 MC 1/2” 10m 1/2” BSP M 1/2” BSP M 840 psi Suitable for oil
48-V601215 V 1/2” 15m 1/2” BSP M 1/2” BSP M 840 psi Suitable for oil
48-BG181325 BG 1/2” 25m 1/2” BSP F 1/2” BSP M 840 psi Suitable for oil
48-VGL603415 VGL 3/4” 15m 1” BSP M 3/4” BSP F 840 psi Suitable for oil
48-VGM600115 VGM 1” 15m 1” BSP F 1” BSP M 840 psi Suitable for oil
MC Series
VGL Series
BG Series
VGM Series
Note: *Reels include hose.
V Series
Hose Reel Accessories
Optional hose reel accessories for professional installation and increased function.
PART NUMBER PRODUCT DESCRIPTION
48-MCSG10 Faicom Swivel Mount Suitable for MC hose reel
48-PFA04 Faicom 4 Reel Bracket Suitable for MC A, AL, V, VL, VGL reels
Faicom Swivel Mount
Faicom 4 Reel Bracket
Oil
25Quality Industry Solutions | www.jsgindustrial.com
Modular Design Allows for Customization
Guardian is a new desiccant type breather and revolutionary by design. Rather than a one-size-fits-all, the Guardian has a modular platform that allows industry to configure the necessary breather for nearly any application and life expectancy.Because of the modular design feature, the Guardian has an optional Stack Ring, which allows multiple cartridges to be stacked atop each other for longer breather life and higher moisture removal capabilities. It also means less servicing and maintenance costs.
Applications:
� Fuel Tanks � Hydraulic Systems � Gearboxes � Wind Turbines � Mobile Service Vechicles
Desiccant Breathers
Watchdog Desiccant Breathers are a unique particle filtration and water removal system. They prevent destructive contaminants from entering industrial equipment as air is breathed in and out due to thermal expansion or fluid level changes. They feature visual indication of the silica for replacement, which turns from orange to dark green.
By allowing only clean, dry air into industrial equipment, the Watchdog Desiccant Breathers prolong fluid life, reduce abrasive wear, downtime, and repair costs.
07-39170
Desiccant Filters shown are fitted with optional Compound Indicator Gauge
07-39173 07-39176
MODEL NO.
HEIGHT DIAMETER FEMALEMOUNTINGCONNECTION
SILICA GEL
MAX. ADSORPTIONCAPACITY
MAX.AIR FLOW
MAX.RESERVOIRFLUID FLOW
ISOLATIONCHECKVALVE
COMPOUNDINDICATINGGAUGE
CARTRIDGE
07-39170 9” 5.125” 1” NPT 1.5 Ibs 0.68kg 9.2 fl oz 272ml 25 CFM 187 GPM Yes No 07-39179
07-39171 9” 5.125” 2” NPT 1.5 Ibs 0.68kg 9.2 fl oz 272ml 25 CFM 187 GPM Yes No 07-39179
07-39172 9” 5.125” 1” BSP 1.5 Ibs 0.68kg 9.2 fl oz 272ml 25 CFM 187 GPM Yes No 07-39179
07-39173 12” 5.125” 1” NPT 2.8 Ibs 1.27kg 17.2 fl oz 508.7ml 25 CFM 187 GPM Yes No 07-39180
07-39174 12” 5.125” 2” NPT 2.8 Ibs 1.27kg 17.2 fl oz 508.7ml 25 CFM 187 GPM Yes No 07-39180
07-39175 12” 5.125” 1” BSP 2.8 Ibs 1.27kg 17.2 fl oz 508.7ml 25 CFM 187 GPM Yes No 07-39180
07-39176 16” 5.125” 1” NPT 4.5 Ibs 2kg 27.6 fl oz 816ml 25 CFM 187 GPM Yes No 07-39181
07-39177 16” 5.125” 2” NPT 4.5 Ibs 2kg 27.6 fl oz 816ml 25 CFM 187 GPM Yes No 07-39181
07-39178 16” 5.125” 1” BSP 4.5 Ibs 2kg 27.6 fl oz 816ml 25 CFM 187 GPM Yes No 07-39181
07-39179 5” 5” N/A 1.5 Ibs 0.68kg 9.2 fl oz 272ml N/A N/A Yes N/A N/A
07-39180 8” 5” N/A 2.8 Ibs 1.27kg 17.2 fl oz 508.7ml N/A N/A Yes N/A N/A
07-39181 12” 5” N/A 4.5 Ibs 2kg 27.6 fl oz 816ml N/A N/A Yes N/A N/A
26 JSG Industrial Systems | General Line Catalogue
WASTE OIL
Was
te O
il
27Quality Industry Solutions | www.jsgindustrial.com
Air Operated Diaphragm Pumps for Waste Oil
All-Flo Diaphragm pumps are designed for pumping waste oils at high volume. Rugged diaphragm materials combined with a sturdy aluminium body ensures quality construction and continuous reliability.
PART NUMBER BODY MATERIAL
FLUID CON-NECTIONS
MAX. FLOW RATE
MAX. AIR PRESSURE
NOISE LEVELS
DIAPHRAGM MATERIAL
VALVE/BALL
VALVE SEAT O-RINGS FLUIDS
51-A050-BAA-GGPN-000 Aluminium 1/2” BSP F 56.8 lpm(15 gpm)
8.2 bar (120 psi)
80 Dba (with muffler)
Geolast Geolast Polypropylene Buna-N Waste Oil
51-A050-BAA-VVAV-000 Aluminium 1/2” BSP F 56.8 lpm (15 gpm)
8.2 bar (120 psi)
80 Dba (with muffler)
Viton Viton Aluminium Viton Waste Oil
51-AB-10-P15 Aluminium 1” BSP 155.8 lpm (41 gpm)
8.2 bar (120 psi)
80 Dba (with muffler)
Geolast Geolast Polypropylene Nitrile Waste Oil
51-A200-BAA-VVYV-000 Aluminium 2” BSP F 719 lpm (190 gpm)
8.2 bar (120 psi)
76 Dba (with muffler) 103 Dba (without)
Viton Viton Nylon Viton Waste Oil
51-AN-30-P15 Aluminium 3” BSP F 965 lpm (255 gpm)
8.2 bar (120 psi)
86 Dba (with muffler)
Nitrile Nitrile Polypropylene Nitrile Waste Oil
Note: For other specifications refer to JSG sales personnel.
1” Aluminium Body Diaphragm Pump
3” Aluminium Body Diaphragm Pump
1/2” A-Series Diaphragm Pump
2” A-Series Diaphragm Pump
WASTE OIL
Was
te O
il
28 JSG Industrial Systems | General Line Catalogue
Mobile Waste Oil Drains
Mobile suction units are suitable for gravity draining of engine, gearbox and differential oil or draining oil from engines through the dip stick hole by pneumatic suction. Kits include 4 wheel trolley, probes, inflating valve and safety valve.
PART NUMBER PRODUCT DRUM DESCRIPTION
48-ZR65 Waste Oil Drain Unit 65L Telescopic steel drain bowl rotatable 360°
48-ZR90 Waste Oil Drain Unit 90L Telescopic steel drain bowl rotatable 360°
48-ZRA65PAN Waste Oil Drain Unit 65L Includes probes for extraction through vehicle dip stick. Adjustable tray.
48-ZRA90PAN Waste Oil Drain Unit 90L Includes probes for extraction through vehicle dip stick. Adjustable tray.
48-ZRAV90PAN Waste Oil Drain Unit 90L Includes probes for extraction through vehicle dip stick. Adjustable tray and oil discharge viewer.
Waste Oil Drain Units
ZR Waste oil with pan up/down
Waste Oil Pneumatic Piston Pump
Faicom waste oil pumps is available in stub with extension tube that can be modified to suit any tank depth to be used primarily for the bulk transfer of waste oil. Designed with a double action pumping system to ensure constant delivery of oil. A unique pneumatic double-cylinder motor results in powerful and compact size. Materials have been selected to guarantee high reliability and resistance to wear and all pumps include a bung bush.
ITEM PRODUCT POWER DESIGN TYPE
FLOW RATE
INLET/OUTLET
DESCRIPTION
48-DP411794NK Faicom 4:1 Waste Oil Pump Air Piston 22 lpm 1/2” BSP Antifreeze, waste oil and other anti corrosion fluids. Not to be used with water solutions, brake fluids and flammable products.
29Quality Industry Solutions | www.jsgindustrial.com
FUEL
Fuel
30 JSG Industrial Systems | General Line Catalogue
FUEL
Diesel Pump Layout
Diesel Pump with Extension
Diesel Nozzle
Hose
Typical Setup – Diesel dispensing using Electric Pump
Electric Diesel Pumps
PART NUMBER PRODUCT VOLTAGE DESIGN TYPE
FLUID FLOW RATE INLET/ OUTLET
DUTY CYCLE
15-000303000 Piusi Viscomat 90T Pump 415 VAC/three phase Vane Diesel Oils up to 500cSt 25 lpm 1" BSP F Continuous
15-000312000 Piusi E120 High Flow Diesel Pump 415 VAC/three phase Vane Diesel 100 lpm 1" BSP F Continuous
15-000326000 Piusi E120 High Flow Diesel Pump 230 VAC/single phase Vane Diesel 100 lpm 1" BSP F Continuous
15-F0036302A Piusi Bipump 12 VDC with 4m cable Vane Diesel 85 lpm 1 1/2" BSP F 30 min
15-F0036304A Piusi Bipump 24 VDC with 4m cable Vane Diesel 86 lpm 1 1/2" BSP F 30 min
15-F0034100C Piusi Panther DC Pump Only 12/24 VDC Gear Diesel 35 or 70 lpm (volt dependant)
1" BSP 30 min
Viscomat 90 T E 120 Bipump Panther DC
Fuel
31Quality Industry Solutions | www.jsgindustrial.com
Note: *Electric pumps suitable for diesel and Kerosene. U.L approval only for pumping Gasoline in U.S.A.
Electric Diesel Pumps Kits*
GPI and Piusi Diesel kits are complete with power supply cable (12/24 VDC), delivery hose, nozzle and tank pick up tube to suit 205L drums and bulk tanks.
PART NUMBER
PRODUCT NOZZLE VOLTAGE DESIGN TYPE FLOW RATE POWER CORD
HOSE DESCRIPTION
52-110000-99 GPI M-150S-ML Manual 12 VDC Aluminum Gear 57 lpm 5.5m 3/4” x 3.7m Overload Protected Motor
52-110000-100
GPI M-150S-AU Automatic 12 VDC Aluminum Gear 57 lpm 5.5m 3/4” x 3.7m Overload Protected Motor
52-133240-1 GPI M3025-ML Manual 12 VDC Electric Vane 95 lpm 4.6m 1” x 3.7m Motor is UL Listed to U.S. and Canadian safety standards.
52-133240-2 GPI M3025-ML Automatic 12 VDC Electric Vane 95 lpm 4.6m 1” x 3.7m Motor is UL Listed to U.S. and Canadian safety standards.
52-133260-01 GPI M3425-ML Manual 24 VDC Electric Vane 95 lpm 4.6m 1” x 3.7m Motor is UL Listed to U.S. and Canadian safety standards.
52-133260-02 GPI M3425-AD Automatic 24 VDC Electric Vane 95 lpm 4.6m 1” x 3.7m Motor is UL Listed to U.S. and Canadian safety standards.
52-133210-01 GPI M-3260-ML Manual 230 VAC Heavy Duty Vane 64 lpm @ 50 Hz None 1” x 3.7m Motor is UL Listed to U.S. and Canadian safety standards.
15-00021800B Piusi 205L Drum Pump Kit
Manual 12 VDC Electric Vane 50 lpm 2m 4m Duty cycle 30 min on/off
15-00021900B Piusi 205L Drum Pump Kit
Manual 24 VDC Electric Vane 50 lpm 2m 4m Duty cycle 30 min on/off
15-000271P00 Piusi 205L Drum Pump Kit - Panther 56
Manual 230 VAC/ single phase
Electric Vane 56 lpm 1.75m 4m Continuous duty cycle
15-000272P00 Piusi 205L Drum Pump Kit - Panther 56 with K33 Meter
Manual 230 VAC/ single phase
Electric Vane 56 lpm 1.75m 4m Continuous duty cycle
Note: For other specifications refer to JSG sales personnel.
M150S shown with Manual Nozzle M3425 and M3025 shown with Auto Nozzle M3260 shown with Manual Nozzle
205L Drum Pump Kit 205L Drum Pump Kit with Meter
Fuel
32 JSG Industrial Systems | General Line Catalogue
1” Aluminium Body Diaphragm Pump
3” Aluminium Body Diaphragm Pump
1/2” A-Series Diaphragm Pump
2” A-Series Diaphragm Pump
Air Operated Diaphragm Pumps for Diesel
PART NUMBER BODY MATERIAL
FLUID CON-NECTIONS
MAX. FLOW RATE
MAX. AIR PRESSURE
NOISE LEVELS
DIAPHRAGM MATERIAL
VALVE/BALL
VALVE SEAT O-RINGS FLUIDS
51-A050-BAA-GGPN-000 Aluminium 1/2” BSP F 56.8 lpm (15 gpm)
8.2 bar (120 psi)
80 Dba (with muffler)
Geolast Geolast Polypropylene Buna-N Diesel
51-A050-BAA-VVAV-000 Aluminium 1/2” BSP F 56.8 lpm (15 gpm)
8.2 bar (120 psi)
80 Dba (with muffler)
Viton Viton Aluminium Viton Diesel
51-AB-10-P15 Aluminium 1” BSP 155.8 lpm (41 gpm)
8.2 bar (120 psi)
80 Dba (with muffler)
Geolast Geolast Polypropylene Nitrile Diesel
51-A200-BAA-VVYV-000 Aluminium 2” BSP F 719 lpm (190 gpm)
8.2 bar (120 psi)
76 Dba (with muffler) 103 Dba (without)
Viton Viton Nylon Viton Diesel
51-AN-30-P15 Aluminium 3” BSP F 965 lpm (255 gpm)
8.2 bar (120 psi)
86 Dba (with muffler)
Nitrile Nitrile Polypropylene Nitrile Diesel
Note: For other specifications refer to JSG sales personnel.
Fuel
33Quality Industry Solutions | www.jsgindustrial.com
Fuel Filters
Filter kit add on and Replacement filter cartridges for GPI Diesel dispensing and metering.
PART NUMBER PRODUCT DESCRIPTION
52-111010-1 GPI Filter Element Replacement filter element for FM-100 series meters
52-133527-01 GPI Fuel Filter Kit Includes 3/4” NPT cast iron adapter, 10 micron filter and 3/4” x 4” nipple
52-133537-01 GPI Fuel Filter Kit Includes 1” NPT, 30 micron particulate filter, adapter, 2 pipe nipples and 2 elbow fittings
Piusi A60 Fuel Nozzle Piusi A80 Fuel Nozzle Piusi A120 Diesel Nozzle
GPI Fuel Filter Kit – 52-133537-01
Fuel Nozzles
Automatic and manual nozzles for Diesel handling. Options for leaded and unleaded also available.
PART NUMBER PRODUCT TYPE CONNECTION SWIVEL FLUID FLOW RATE
15-F00602020 Piusi A60 Fuel Nozzle Auto 1” BSP F Yes Diesel and unleaded 60 lpm
15-F00603060 Piusi A60 Fuel Nozzle Auto 1” BSP F Yes Diesel and leaded 60 lpm
15-F00604030 Piusi A80 Fuel Nozzle Auto 1” BSP F Yes Diesel and leaded 90 lpm
15-F00610020 Piusi A120 Fuel Nozzle Auto 1” BSP F Yes Diesel 120 lpm
15-F00641130 Piusi S2000 Fuel Nozzle Manual 1” BSP F Yes Diesel, oil and leaded 120 lpm
52-110121-8 GPI Fuel Nozzle Auto 3/4" NPT F No Diesel, unleaded and kerosene 60 lpm
52-110376-01 GPI Fuel Nozzle Auto 1" NPT F No Diesel 76 lpm
52-906005-1 GPI Fuel Nozzle Auto 1" NPT F No Diesel, unleaded and kerosene 114 lpm
52-110155-1 GPI Fuel Nozzle Manual 3/4" NPT F Yes Diesel, unleaded and kerosene 69 lpm
52-110155-4 GPI Fuel Nozzle Manual 1" NPT F Yes Diesel, unleaded and kerosene 69 lpm
Piusi S2000 Fuel Nozzle
GPI Auto 3/4" Fuel Nozzle GPI Auto 1" Diesel Nozzle GPI Auto 1" Fuel Nozzle GPI Man. Fuel Nozzle
Fuel
34 JSG Industrial Systems | General Line Catalogue
Fuel Meters
GPI fuel meters provide a economical solution for tracking fuel inventory and fuel dispensing. Available in electronic and mechanical versions, GPI meters provide accurate and repeatable measurements.
PART NUMBER SERIES PRODUCT DESIGN TYPE
FLOW RANGE ACCURACYOF READING
INLET/OUTLET SIZE
DESCRIPTION
52-111200-19 FM-100 GPI FM-100-L6N Fuel Meter
Mechanical 15 - 76 lpm +/- 2% 3/4” NPT Suitable for gasoline, E10, diesel. Calibrated for litres. Built in filter
52-111200-22 FM-100 GPI FM-100-L6N Fuel Meter
Mechanical 15 - 76 lpm +/- 2% 3/4" BSPP F Suitable for gasoline, E10, diesel. Calibrated for litres. Built in filter
52-111200-21 FM-200 GPI FM-200-L6N Fuel Meter
Mechanical 15 - 76 lpm +/- 2% 3/4” NPT Suitable for gasoline, E10, diesel. Calibrated for litres
52-111200-23 FM-200 GPI FRM-200-L6N Fuel Meter
Mechanical 15 - 76 lpm +/- 2% 3/4" BSPP F Suitable for gasoline, E10, diesel. Calibrated for litres. Built in filter
52-126300-02 MR 5-30 GPI MR 5-30-L6N Fuel Meter
Mechanical 19 - 114 lpm +/- 2% 3/4” NPT Suitable for gasoline, E10, diesel. Calibrated for litres. Changeable flow direction
52-126300-07 MR 5-30 GPI MR 5-30-L6N Fuel Meter
Mechanical 19 - 114 lpm +/- 2% 3/4" BSPP F Suitable for gasoline, E10, diesel. Calibrated for litres. Changeable flow direction
52-111200-10 FM-100 GPI FM-100-L6N Fuel Meter
Mechanical 15 - 76 lpm +/- 2% 1” NPT Suitable for gasoline, E10, diesel. Calibrated for litres. Built in filter
52-111200-12 FM-100 GPI FM-100-L6N Fuel Meter
Mechanical 15 - 76 lpm +/- 2% 1" BSPP F Suitable for gasoline, E10, diesel. Calibrated for litres. Built in filter
52-111200-13 FM-200 GPI FM-200-L6N Fuel Meter
Mechanical 15 - 76 lpm +/- 2% 1” NPT Suitable for gasoline, E10, diesel. Calibrated for litres
52-111200-15 FM-200 GPI FM-200-L6N Fuel Meter
Mechanical 15 - 76 lpm +/- 2% 1" BSPP F Suitable for gasoline, E10, diesel. Calibrated for litres
52-113255-2 01 GPI 01A31LM Fuel Meter Electronic Turbine
10 - 100 lpm +/-5% 1” NPT Suitable for gasoline, E10, diesel. Calibrated for litres. Powered by two AAA batteries, field replaceable
52-113255-12 01 GPI 01A31LM Fuel Meter Electronic Turbine
10 - 100 lpm +/-5% 1" BSPP F Suitable for gasoline, E10, diesel. Calibrated for litres. Powered by two AAA batteries, field replaceable
52-113900-9501 03 GPI 03A31GM Fuel Meter Electronic Turbine
11 - 100 lpm +/-1.5% 1” NPT Suitable for gasoline, E10, diesel. Calibrated for litres. Powered by two AAA batteries, field replaceable
52-113900-9502 03 GPI 03A32GM Fuel Meter Electronic Turbine
114 - 1135 lpm +/-1.5% 2” NPT Suitable for gasoline, E10, diesel. Calibrated for litres. Powered by two AAA batteries, field replaceable
15-F00484000 K Piusi K400 Fuel Meter Oval Gear - Electronic
1 - 30 lpm +/-0.5% 1/2" BSP F Suitable for Diesel, AdBlue and oil up to 2000cSt.
15-F00496A00 K Piusi K600/3 Fuel Meter Oval Gear _ Electronic
10 - 100 lpm +/-0.5% 1" BSP F Suitable for Diesel and Anti Freeze
15-000550000 K Piusi K33 Fuel Meter Mechanical Nutating Disk
20 - 120 lpm +/-1% 1" BSP F Suitable for Diesel
Note: For other specifications refer to JSG sales personnel.
Fuel
35Quality Industry Solutions | www.jsgindustrial.com
GPI FM-100 Fuel Meter
GPI 01A31LM Fuel Meter
Piusi K33 Fuel Meter
GPI FM-200 Fuel Meter
GPI 03A31GM Fuel Meter
Piusi K400 Fuel Meter
GPI MR 5-30 Fuel Meter
GPI 03A32GM Fuel Meter
Piusi K600/3 Fuel Meter
Fuel Meters
Fuel
36 JSG Industrial Systems | General Line Catalogue
Faicom Hose Reels*
Engineered with a robust spring canister, Faicom fuel reels reliably dispense and retract hose for dispensing applications. A powder coated finish over a hot galvanised steel structure ensures the longevity of function and aesthetic appearance.
PART NUMBER SERIES MAX. HOSESIZE
MAX. HOSE LENGTH
SWIVEL INLET THREAD
OUTLET THREAD MAX. WORKING PRESSURE
DESCRIPTION
48-V181315 V 1/2” 15m 1/2” BSP M 1/2” BSP M 250 psi Suitable for diesel
48-VG603408 VG 3/4” 8m 1” BSP M 3/4” BSP M 840 psi Suitable for diesel
48-VGL102510GO VGL 1” 10m 1” BSP F 1” BSP M 120 psi Suitable for diesel
48-BGL102525GO BGL 1” 25m 19mm HOSE BARB 1” BSP M 140 psi Suitable for diesel
VGL Series BGL Series
Note: *Reels include hose.
V Series
Maspel 60L Hand Pump
VG Series
GPI 205L Rotary Hand Pump
Hose Reel Accessories
Optional hose reel accessories for professional installation and increased function.
PART NUMBER PRODUCT DESCRIPTION
48-PFA04 Faicom 4 Reel Bracket Suitable for VGL reels
Hand Fuel Pumps
PART NUMBER PRODUCT DESCRIPTION
16-112930 Maspel Hand Plunger Pump 20L drums. Suits diesel and gasoline.
16-112965 Maspel Hand Plunger Pump 60L drums. Suits diesel and gasoline.
52-129003-1 GPI RP-5 Hand Rotary Pump 205L drums. Suits diesel, gasoline, light weight and hydraulic oils. U.L Listed. 30L/90 revolution.
52-114000-10 GPI HP-100-NUL High Flow Hand Diaphragm pump
Adjustable 60 - 205L drums. Suits diesel, gasoline, medium weight and hydraulic oils. U.L Listed. 1.9L/stroke.
16-152650 Maspel Rotary Pump 60 -205L drums. 330ml/rev
16-152751 Maspel High Flow Rotary Pump 60 -205L drums. 1L/rev
Maspel 20L Hand Pump
Maspel High Flow Rotary Pump
Maspel Rotary Pump
Faicom 4 Reel Bracket
GPI 205L – 60L High Flow Hand Pump
37Quality Industry Solutions | www.jsgindustrial.com
WATER & CHEMICAL
Wat
er &
Che
m
38 JSG Industrial Systems | General Line Catalogue
WATER & CHEMICALS
Water & Chemical Pump Layout
Typical Setup – Chemical dispensing using Chemical Pump in IBC
Water & Chemical Pumps
Water and chemical pump kits are complete with power supply cable (12/24 VDC), delivery hose, nozzle and tank pick up tube.
PART NUMBER PRODUCT POWER DESIGN TYPE
FLOW RATE
INLET/OUTLET
DUTY CYCLE
DESCRIPTION
52-118000-1 GPI P-120H-2UR Chemical Pump 12 VDC Gear 45 lpm 1” 30 min Thin Chemicals 0 - 5 cSt,, not to be used with fuels or mirco-encapsulated chemicals.
52-118000-2 GPI P-200H-2UR Chemical Pump 12 VDC Gear 30 lpm 1” 30 min Medium/Thick Chemicals 10 - 160 cSt, not ot be used with fuels or mirco-encapsulated chemicals.
48-DP2101 Faicom 2:1 Multifluid Pump Air Piston 50 lpm 20mm N/A Water solutions, low viscosity oil, Adblue, antifreeze, windshield fluid and water based detergents. Not to be used with solvents, flammable liquids or highly aggressive/corrosive liquids. For Stainless steel 1.1m extension tube use 48-PX01127 includes one way valve and filter.
48-DP411794NK Faicom 4:1 Antifreeze Pump Air Piston 22 lpm 1/2” BSP N/A Antifreeze, waste oil and other anti corrosion fluids. Not to be used with water solutions, brake fluids and flammable products.
GPI 12 VDC Chemical Pump Faicom 4:1 Multifluid Pump Faicom 4:1 Antifreeze Pump
Chemical Pump with Wall Mount
Hose
Pickup Tube
Wat
er &
Che
m
39Quality Industry Solutions | www.jsgindustrial.com
1” Polypropylene, Model PB 1/2” Polypropylene, Model PB
Air Operated Diaphragm Pumps for Chemical Solutions
All-Flo Diaphragm pumps are designed for pumping water based chemical solutions at high volume. Rugged diaphragm materials combined with a sturdy aluminium body ensures quality construction and continuous reliability.
PART NUMBER BODY MATERIAL
FLUID CON-NECTIONS
MAX. FLOW RATE
MAX. AIR PRESSURE
NOISE LEVELS
DIAPHRAGM MATERIAL
VALVE/BALL
VALVE SEAT O-RINGS FLUIDS
51-PB-05 Polypropylene 1/2” NPT/BSP
64.6 lpm (17 gpm)
8.2 bar (120 psi)
83 Dba (with muffler)
Geolast Geolast Polypropylene Nitrile Chemical, Glycol & Water
51-NC-10-P15 Polypropylene 1” BSP 155.8 lpm (41 gpm)
8.2 bar (120 psi)
80 Dba (with muffler)
Geolast Geolast Polypropylene Nitrile Chemical, Glycol & Water
51-PB-10 Polypropylene 1” ANSI/DIN Flange
155.8 lpm (41 gpm)
8.2 bar (120 psi)
80 Dba (with muffler)
Geolast Geolast Polypropylene Nitrile Chemical, Glycol & Water
51-BK-10V-P15 Polypropylene 1” BSP 152 lpm (41 gpm)
6.8 bar (100 psi)
80 Dba (with muffler)
Viton Viton Polypropylene Viton Chemical, Glycol & Water
Note: For other specifications refer to JSG sales personnel.
Wat
er &
Che
m
40 JSG Industrial Systems | General Line Catalogue
Water Meters
GPI Water meters provide an economical solution for tracking water dispensing. Available in electronic and mechanical versions, GPI meters provide accurate and repeatable measurements.
PART NUMBER PRODUCT DESIGN TYPE
FLOW RANGE
ACCURACY OF READING
INLET, OUTLET SIZE
POWER FLUID DESCRIPTION
52-113255-5 Economy GPI 01N12LM Water Meter
Electronic Turbine
10 - 100 lpm +/-1% 1” ISO 2 x AAA Batteries
Water Water only. Ideal for monitoring and indication. Ceramic bearings, tungsten carbide shaft, nylon rotors, ferrite signal generators.
52-113255-6 Economy GPI 01N12LM Water Meter
Electronic Turbine
10 - 100 lpm +/-1% 1” NPT 2 x AAA Batteries
Water Water only. Ideal for monitoring and indication. Ceramic bearings, tungsten carbide shaft, nylon rotors, ferrite signal generators.
52-TM300-F PVC Flow Meter Electronic Turbine
151 - 514 lpm +/-3% 3” ANSI - 150 Flanges
2 x AAA Batteries
Water Ideal for monitoring and indication. Stainless steel shaft and thrust washers, acetal rotors and nose cone, ferrite signal generator, ANSI - 150 flange connections
52-TM100 PVC Flow Meter Electronic Turbine
19 - 190 lpm +/-3% 1” Schedule 80 Spigot
2 x AAA Batteries
Water Ideal for monitoring and indication. Tungsten carbide shaft, PVDF rotor and 316 stainless steel rings
52-TM400-F PVC Flow Meter Electronic Turbine
227 - 271 lpm +/-3% 4” ANSI - 150 Flanges
2 x AAA Batteries
Water Ideal for monitoring and indication. Stainless steel shaft and thrust washers, acetal rotors and nose cone, ferrite signal generator, ANSI - 150 flange connections
52-TM050 PVC Flow Meter Electronic Turbine
3.8 - 38 lpm +/-3% 1/2” Schedule 80 Spigot
2 x AAA Batteries
Water Ideal for monitoring and indication. Tungsten carbide shaft, PVDF rotor and 316 stainless steel rings
52-TM150 PVC Flow Meter Electronic Turbine
38 - 380 lpm +/-3% 11/2” Schedule 80 Spigot
2 x AAA Batteries
Water Ideal for monitoring and indication. Tungsten carbide shaft, PVDF rotor and 316 stainless steel rings
52-TM200 PVC Flow Meter Electronic Turbine
76 - 760 lpm +/-3% 2” Schedule 80 Spigot
2 x AAA Batteries
Water Ideal for monitoring and indication.Tungsten carbide shaft, PVDF rotor and 316 stainless steel rings
PVC Flow Meter TM Series with 1/2” Spigot Connection
PVC Flow Meter TM Series with 4” RF Flange
PVC Flow Meter TM Series with 2” Spigot ConnectionEconomy 01 Series Water Meter
Wat
er &
Che
m
41Quality Industry Solutions | www.jsgindustrial.com
Chemical Meters
Available in electronic and mechanical versions, GPI chemical meters provide accurate and repeatable measurements. Compatible with mild chemical solutions as well as water.
PART NUMBER PRODUCT DESIGN TYPE
FLOW RANGE
ACCURACY OF READING
INLET, OUTLET SIZE
POWER FLUID DESCRIPTION
52-111200-17 GPI FM-100 Series Chemical Meter (FM-100H-L8B)
Mechanical 12 - 75 lpm
+/-1% 1” BSP P N/A Water, compatible chemicals.
Suitable with most herbicides and other chemicals compatible with meter materials. Do not use with water.
52-A109LMA025IA1 GPI A1 Series Aluminium Low Flow Meter
PaddleWheel
1 - 11 lpm
+/-1% 1” BSP 2 x AAA Batteries
Water, compatible chemicals.
Ceramic bearings, tungsten carbide shaft, nylon rotors, ferrite signal generators.
52-A109LMA100IA1 GPI A1 Series Aluminium Flow Meter
Electronic Turbine
11 - 190 lpm
+/-1% 1” BSP 2 x AAA Batteries
Water, compatible chemicals.
Ceramic bearings, tungsten carbide shaft, nylon rotors, ferrite signal generators.
52-A109LMA200IA2 GPI A1 Series Aluminium Flow Meter
Electronic Turbine
114 - 1135 lpm
+/-1% 1” BSP 2 x AAA Batteries
Water, compatible chemicals.
Ceramic bearings, tungsten carbide shaft, nylon rotors, ferrite signal generators.
52-A109LMN100IA1 GPI A1 Series Nylon Flow Meter
Electronic Turbine
11 - 190 lpm
+/-3% 1” BSP 2 x AAA Batteries
Water, compatible chemicals.
Ceramic bearings, tungsten carbide shaft, nylon rotors, ferrite signal generators.
52-120000-2 GPI FM-300 Series Chemical and Water Meter (FM-300H-L8N)
Electronic Turbine
7 - 76 lpm
+/-1% 1” NPT 1 x 9V Battery
Water, herbicides, fertiliser, oils
Suitable with water, most herbicides, fertiliser and oils. Do not use with fuels and flammables.
FM-300 Series Chemical Meter
A1 Series High Flow Aluminium Chemical Meter
FM-100 Series Mechanical Chemical Meter A1 Series High Flow Nylon Chemical Meter
Wat
er &
Che
m
42 JSG Industrial Systems | General Line Catalogue
VX Series
MC Series VL Series
Air, Water & Chemical Hose Reels*
Engineered with a robust spring canister, Faicom Water and Chemical reels reliably dispense and retract hose for dispensing applications. A powder coat finish over a hot galvanised steel structure ensures the longevity of function and aesthetic.
PART NUMBER SERIES MAX. HOSESIZE
MAX. HOSE LENGTH
SWIVEL INLET THREAD
OUTLET THREAD
MAX. WORKING PRESSURE
DESCRIPTION
48-MC180815 MC 3/8” 15m 3/8” BSP F 3/8” BSP M 250 psi Suitable for air and water
48-MC601210 MC 1/2” 10m 1/2” BSP M 1/2” BSP M 840 psi Suitable for air and water
48-V181315 V 1/2” 15m 1/2” BSP M 1/2” BSP M 250 psi Suitable for air and water
48-VL601220 VL 1/2” 20m 1/2” BSP M 1/2” BSP M 840 psi Suitable for air and water
48-BG181325 BG 1/2” 25m 1/2” BSP F 1/2” BSP M 840 psi Suitable for air and water
48-BG600115 BG 1” 15m 1” BSP F 1” BSP F 840 psi Suitable for air and water
48-VX4H3815 VX 3/8” 15m 3/8” BSP F 3/8” BSP M 5600 psi @ 150°C Suitable for water, high pressure hot wash.
48-VL4H3820 VL 3/8” 20m 3/8” BSP F 3/8” BSP M 5600 psi @ 150°C Suitable for water, high pressure hot wash.
48-VGLX101915K VGLX 3/4” 15m 19mm HOSE BARB
3/4” BSP F 140 psi @ 150°C Suitable for water, high flow, high temperature wash.
VGLX Series
BG Series
Note: *Reels include hose.
V Series
Hose Reels Accessories
Optional hose reel accessories for professional installation and increased function.
PART NUMBER PRODUCT DESCRIPTION
48-MCSG10 Faicom Swivel Mount Suitable for MC hose reel
48-PFA04 Faicom 4 Reel Bracket Suitable for MC, V, VL, VGL reels
Faicom Swivel Mount
Faicom 4 Reel Bracket
Wat
er &
Che
m
43Quality Industry Solutions | www.jsgindustrial.com
Air/Filter, Regulator and Lubricator
Pump Air Supply Accessories
Clean, lubricated air supply to the pump will ensure a long pump life. All assemblies include gauge.
PART NUMBER PRODUCT THREAD SIZE
48-FRL12 Filter, Regulator and Lubricator 1/2” BSP
48-FRL14 Filter, Regulator and Lubricator 1/4” BSP
48-R14 Regulator 1/4” BSP
Chemical Hand Pumps
PART NUMBER PRODUCT DESCRIPTION
16-001461 Maspel Plunger Pump 60 - 205L drums. Chromed finish. Suits mild soaps, waxes and thinners. 250ml/stroke
16-112930 Maspel Hand Plunger Pump 20L drums. Suits oils, soaps and water based fluids.
16-112965 Maspel Hand Plunger Pump 60L drums. Suits oils, soaps and water based fluids.
52-129000-1 GPI Hand Lever Pump 60 - 205L drums. Suits water, antifreeze, mild detergents, lubricants, Adblue and agricultural chemicals
Faicom Manual Chemical Nozzle Filcar Fluid Nozzle
Hand Lever Pump
Maspel 60L Hand Pump Chrome Hand Plunger Pump
Nozzles
PART NUMBER PRODUCT CONNECTION DESCRIPTION
52-906008-01 GPI Chemical Auto Nozzle 3/4” BSP P Stainless steel, no swivel
48-PPM90ADB Faicom Manual Nozzle 1” BSP P Plastic, includes swivel
48-P12A95 Faicom Spray Nozzle 1/2” BSP P Chrome plated brass for water only, includes swivel
30-FD-DP-AH072101 Filcar Fluid Nozzle 3/8" BSP P Stainless Steel Nozzle for Fluid and Water
Maspel 20L Hand Pump
Faicom Water Spray Nozzle
GPI Auto Chemical Nozzle
44 JSG Industrial Systems | General Line Catalogue
ADBLUE
Adbl
ue
45Quality Industry Solutions | www.jsgindustrial.com
Barrel Adblue Kit Fiacom 1,000 Litre IBC Air Operated Kit
Tote Adblue KitTote Adblue Kit
ADBLUE HANDLING
Adblue Pump Kits
Adblue pump kits come complete with electric pump, nozzle and delivery hose. To prevent contamination, kits also include micromatic and RSV coupler. A convenient mounting plate is designed for secure component holding as well as ease of transfer between containers.
PART NUMBER PRODUCT NOZZLE VOLTAGE FLOW RATE POWER CORD
HOSE DESCRIPTION
52-118450-32 GPI P-120DEF-2TC-TOTE Adblue IBC Kit
Automatic 12 VDC Up to 45 lpm 6m 3.7m Includes micromatic coupler and powder coated bracket
52-118450-14 GPI P-120DEF-BRL Barrel Adblue Kit
Manual 12 VDC Up to 45 lpm 6m 3.7m Includes powder coated bracket
48-KP21ADBSPI FIACOM 1,000 Litre IBC Air Operated Kit
N/A N/A 26 lpm 4.0m Included pressure regulator with safety valve
Adblue Pump
Micromatic and RSV Coupler
Hose
NozzleBarrel Mount
Adblue Pump Layout
Typical Setup – Adblue dispensing setup using Electric Pump in Barrel
Adbl
ue
46 JSG Industrial Systems | General Line Catalogue
Electrical Adblue Pump
Adblue Electronic Disk Meter
Hand Lever Pump
Adblue Electronic Turbine Meter
Adblue Pump
Manual lever pumps offer economical method for dispensing Adblue fluids from IBC tanks and Barrels. For reliable performance, GPI manual and electric Adblue pumps are constructed from Adblue compatible materials.
PART NUMBER PRODUCT NOZZLE VOLTAGE FLOW RATE POWER CORD
HOSE DESCRIPTION
52-129000-1 GPI DEF Hand Lever Pump LP-50
Molded Acetal Spout
Manual Approx. 0.5L/stroke
N/A N/A Designed for easy pumping
52-118450-22 GPI P-120DEF-2TC-PO Adblue Pump
N/A 12 VDC 45 lpm 6m N/A Includes adjustable suction pipe
48-DP2101 FIACOM High Performance 2:1 Pneumatic Pump
N/A N/A 50 lpm N/A Order drop tube 48-PX01ADBSV for use with 200L Drums
Adblue Meters
GPI meters provide a economical solution for tracking Adblue dispensing. Available in electronic and mechanical versions, GPI meters provide accurate and repeatable measurements.
PART NUMBER PRODUCT TYPE POWER FLOW PRESSURE CONNECTIONS DESCRIPTION
52-1113255-24 GPI 01N31GM-U Turbine Meter Nylon Digital Turbine
2 x AAA Battery
10 - 100 lpm 150 psi 1” NPT Accuracy +/-5% of reading
52-120000-32 GPI FM-300U Disc Meter Digital Disc 1 x 9 V Battery
7 - 76 lpm 50 psi 1” NPT Accuracy +/-2% of reading
Adbl
ue
47Quality Industry Solutions | www.jsgindustrial.com
Adblue Nozzles & Hoses
Automatic and manual nozzles for Adblue handling. Can be combined with GPI Adblue compatible hoses for maximum reliability.
PART NUMBER PRODUCT CONNECTION POWER
52-906008-01 GPI Adblue Auto Nozzle 3/4” BSP P No swivel
52-906006-83 GPI Adblue Auto Nozzle 3/4” NPT No swivel
52-906008-02 GPI Adblue Manual Nozzle 3/4” HOSE BARB No swivel
48-PPM90ADB Faicom Adblue Manual Nozzle 1” BSP P Swivel
52-150200-01 GPI Adblue Hose 3/4” NPT 3.7m (12ft) long
52-150200-21 GPI Adblue Hose 3/4” BSP P 3.7m (12ft) long
52-150200-22 GPI Adblue Hose 3/4” NPT, BARB 3.7m (12ft) long
52-150200-23 GPI Adblue Hose 3/4” BARB 3.7m (12ft) long
Adblue Hose Reels*
Engineered with a robust spring canister, Faicom Adblue reels reliably dispense and retract hose for dispensing applications. A powder coat finish over a hot galvanised steel structure ensures the longevity of function and aesthetic.
PART NUMBER SERIES MAX. HOSESIZE
MAX. HOSE LENGTH
SWIVEL INLET THREAD
OUTLET THREAD
MAX. WORKING PRESSURE
DESCRIPTION
48-VGL101910ADB VGL 3/4” 10m 19mm 19mm 140 psi Suitable for Adblue
48-VGL101915ADB VGL 3/4” 15m 19mm 19mm 140 psi Suitable for Adblue
3.7m Adblue HoseAdblue Manual Nozzle
Adblue Auto Nozzle
VGL Series
Elec
. Cab
le
48 JSG Industrial Systems | General Line Catalogue
ELECTRICAL & CABLE MANAGEMENT
Elec
. Cab
le
49Quality Industry Solutions | www.jsgindustrial.com
ELECTRICAL & CABLE MANAGEMENT
Electrical Supply Reels
Heavy gauge steel housing with white polyester baked-on finish, hardware for wall or ceiling mounting, positive ratchet lock and cord stop, designed for indoor use.
PART NUMBER PRODUCT HOUSING CORD LENGTH
MAX. AMPS
WEIGHT
48-ROLLMAS22015 Faicom Compact Reel
HDPE Plastic
15m 20 7.5kg
48-ROLLMAJ22025 Faicom Compact Reel
HDPE Plastic
25m 15 7.5kg
Faicom Curtain Cable Reels
Faicom curtain reels are constructed from galvanised and UV resistant powder coated steel making it suitable for indoor and outdoor applications. Curtain reels can be used in dividing working areas for activities such as washing, grinding, welding and painting. It can also be used to create temporary in such places as sporting facilities and workshops.
PART NUMBER PRODUCT DIAMETER LENGTH DESCRIPTION
48-MPRT08 Curtain reel 3mm stainless steel
8m Automatic reel. No curtain included
48-MPRT11 Curtain reel 3mm stainless steel
11m Automatic reel. No curtain included
Gleason Static Discharge Reels
Ideal for a wide variety of grounding applications, the Static Discharge Rees are available with your choice of cable length and connector. All reels include spring rewind, centrifugal brake and ratchet lock.
PART NUMBER PRODUCT CABLE LENGTH
24-SD2030 Gleason Enclosed Static Discharge Reel 9m No Cable Cover
24-SD2050 Gleason Enclosed Static Discharge Reel 15m No Cable Cover
24-SD2050N Gleason Enclosed Static Discharge Reel 15m Nylon Cable Cover
Note: For other specifications refer to JSG sales personnel.
Gleason Compact Supply Reel
Faicom Compact Supply Reel
Static Discharge Reel
Faicom Curtain Reel
Elec
. Cab
le
50 JSG Industrial Systems | General Line Catalogue
Gleason Cable-Master Reels
Gleason Cable-Master Reels are ruggedly built and their design refined over many years of field use, they are ideally suited for smaller reciprocating gantry crane applications.
PART NUMBER PRODUCT NO. OFCONDUCTORS
MAX. AMPS
MAXIMUM CABLE LENGTH
23-CM141-43 Gleason Direct Drive Heavy Duty Spring-Driven Electric Cable Reel
4 30 6m
23-CM164-83 Gleason Direct Drive Heavy Duty Spring-Driven Electric Cable Reel
8 30 18m
Note: For other specifications refer to JSG sales personnel.
Cable Master Reel
Poor cable management on reciprocating or moving machinery such as CNC cutting heads, can result in electrical shorting through wear, abrasion, kinking, interference with the machine or passing traffic. The correct Cable Management System will ensure an extended life of cables by preventing damage and wear and thus lowering costs.
The following cable reels and cable management equipment are indicative of those available, part numbers of the other reels including specialized Cable Reels and ancillary products, are available on request.
Gleason Series “S” Spring-Driven Electric Cable Reels
Gleason Series “S” Heavy Duty Spring-Driven Electric Cable Reels are designed to be mounted on moving machinery. S-Reels utilize self-contained slip ring assemblies which transfer current to the cable mounted on the rotating spool.
PART NUMBER PRODUCT NO. OF CONDUCTORS
MAX. AMPS
MAXIMUM CABLE LENGTH
23-S16-621-43 Gleason Direct Drive Heavy Duty Spring-Driven Electric Cable Reel
4 35 20m
23-S24-801-43 Gleason Direct Drive Heavy Duty Spring-Driven Electric Cable Reel
4 75 24m
Note: For other specifications refer to JSG sales personnel. Series "S" Reel
Cable Festoon System
Gleason “C” Track Festoon Systems
Engineered to run on I Beams, “C” Track and the latest technology allowing “Curved Track” Festoon Systems. The Gleason Festoon Systems come in a wide range of trolley design used to carry hose and cable of various diameters, widths and weights safely off the ground.
PART NUMBER PRODUCT ACTIVE TRAVEL
STORAGE DISTANCE
SYSTEM LENGTH
ACTIVE TRAVEL
24-CR-09-36-2 Gleason “C” Track Festoon System for Round Cable
13.8m 1m 14.8 19.5m
24-CF-09-36-2 Gleason “C” Track Festoon System for Flat Cable
15m 1m 16m 17.6m
Note: For other specifications refer to JSG sales personnel.
Elec
. Cab
le
51Quality Industry Solutions | www.jsgindustrial.com
Gleason Ergonomic Tool Balance Reels
Series "BD Tool Balancers are the economical choice for balancing tools weighing up to 2.3kg. Heavy Duty Series "BG" Tool Balancers are constructed for balancing heavier tools & parts weighing up to 12.2kg.
PART NUMBER PRODUCT CABLE LENGTH
REEL WEIGHT
MIN-MAX LOAD
RATCHET LOCK
24-BD-03 Ecomonical Tool Balancer 1.8m 0.6 Kg 0.5kg - 1.4kg No
24-BD-05 Ecomonical Tool Balancer 1.8m 0.6kg 1.4kg - 2.3kg No
24-BG-07 Heavy Duty Tool Balancer 2.4m 2.7kg 2.3kg - 4.5kg No
24-BG-07-L Heavy Duty Tool Balancer 2.4m 2.7kg 2.3kg - 4.5kg Yes
24-BG-10 Heavy Duty Tool Balancer 2.4m 3.2kg 3.6kg - 5.4kg No
24-BG-10-L Heavy Duty Tool Balancer 2.4m 3.2kg 3.6kg - 5.4kg Yes
24-BG-15 Heavy Duty Tool Balancer 2.4m 3.6kg 4.5kg - 6.8kg No
24-BG-15-L Heavy Duty Tool Balancer 2.4m 3.6kg 4.5kg - 6.8kg Yes
24-BG-25 Heavy Duty Tool Balancer 2.4m 3.6kg 9.9kg - 12.2kg No
24-BG-25-L Heavy Duty Tool Balancer 2.4m 3.6kg 9.9kg - 12.2kg Yes
Note: For other specifications refer to JSG sales personnel.
GRP PowerTrak Steel PowerTrak
Gleason PowerTrak®
Protect cables and hoses on reciprocating machinery and increase safety by keeping cables and hoses together, away from moving components and operations. PowerTrak® is available in a variety of styles and materials and can work in both vertical and horizontal applications.
PART NUMBER PRODUCT WIDTH HEIGHT WINDOWWIDTH
WINDOWHEIGHT
MAX. CABLE O.D
WEIGHT KG/M
21-132P-II-3.7 Gleason GRP PowerTrak 74mm 34mm 58.0mm 24.9mm 20.8mm 0.67
21-162P-II-3.4 Gleason GRP PowerTrak 74mm 41.2mm 58.0mm 25.4mm 21.1mm 0.88
21-PT35E-11-6R2 Gleason Steel PowerTrak 178mm 68mm 144.6mm 39.4mm 38.0mm 6.53
Note: For other specifications refer to JSG sales personnel.
BG Series
BD Series
52 JSG Industrial Systems | General Line Catalogue
MITYVAC
Mity
vac
53Quality Industry Solutions | www.jsgindustrial.com
Mityvac brand of hand vacuum pumps and kits, fluid evacuators, brake and clutch bleeding kits, engine diagnostic equipment, cooling system testers and other specialty tools and accessories.
Cooling System Testing & Diagnostic Equipment
PART NUMBER PRODUCT DESCRIPTION
12-MV4506 Universal Cooling System Adaptor Includes universal cooling system adapter and user's manual
12-MV4510 Motorcycle Cooling Test Kit Includes Mityvac Selectline hand pressure pump with Ø50mm gauge; low-profile Bayonet test adapter; Bayonet cap test adapter; connection hose; compression nut and user manual
12-MV4525 Cooling System Test and Refill Kit Includes pressure pump; Ø64mm diaphragm style compound gauge with hanging hook; Venturi vacuum; valve coupler; temperature probe; (2x) 760mm extension hose; 1.5m refill hose; 1.5m drain hose; cap wrench; hose clip; MVA100 cooling system adapter (US and foreign cars); MVA101 cooling system adapter (Asian cars); MVA102 cooling system adapter (Asian cars); MVA103 cooling system adapter (US and foreign cars); custom molded case; user manual and adapter selection guide
12-MV4530 Cooling System Pressure Test Kit Includes hand pressure pump with 610mm long hose and push-button pressure relief valve; MVA100 cooling system adapter (US and foreign cars); MVA101 cooling system adapter (Asian cars); MVA102 cooling system adapter (Asian cars); MVA103 cooling system adapter (US and foreign cars); cap wrench; custom molded case; user manual and adapter selection guide
12-MV4535 Cooling System Air Evacuation Kit Includes Ø64mm diaphragm style vacuum gauge with hanging hook; Venturi vacuum; valve coupler; universal cooling system adapter; (2x) 760mm extension hose; 1.5m refill hose; custom molded case and user manual
12-MV4560 Cooling System Pressure Test Kit Includes Mityvac Selectline hand pressure pump with Ø50mm gauge; small Bayonet test adapter – deep; small Bayonet test adapter – shallow; large Bayonet test adapter; GM/Ford test adapter; small Bayonet cap test adapter; large Bayonet/GM/Ford cap test adapter; connection hose; compression nut and user manual
12-MV4529 Cooling System Pressure Tester Includes high-quality pressure pump and adapter for connecting to bayonet style radiator and coolant bottle necks
Universal Cooling System Adaptor
Motorcycle Cooling Test Kit
Cooling System Pressure Test Kit
Cooling SystemPressure Tester
Cooling System Test and Refill Kit
Cooling System Pressure Test Kit
Cooling System Air Evacuation Kit
MITYVAC – AUTOMOTIVE & VACUUM RELATED TOOLS & EQUIPMENT
Mity
vac
54 JSG Industrial Systems | General Line Catalogue
Engine Diagnostic Equipment
PART NUMBER PRODUCT DESCRIPTION
12-MV5511 Vacuum Pressure Test Gauge and Fuel Pump Tester
Includes 90mm compound gauge (readings indicated in psi, kg/cm2, in. Mercury (Hg), and cm Mercury (Hg)) with barb fitting; 24” (610mm) oil-resistant hose; universal fuel line adapter; tapered adapter; tee adapter and user manual
12-MV5515 Fuel Injector Pressure Test Kit Includes Ø70mm Bourdon tube gauge (readings indicated in psi and kPa) with manual pressure release, 380mm braided hose and GM/Chrysler adapter; Ford adapter; 1.8m fuel drain hose and user manual
12-MV5520 Compression Tester Includes Ø70mm Bourdon tube gauge (readings indicated in four (4) scales of measure (bar, psi, kPa, and kg/cm²) with pressure release and quick-change coupler; 14mm and 18mm short-thread adapter with 380mm hose; 14mm long-thread adapter and user manual
12-MV5525 Compression Tester Includes Ø70mm Bourdon tube gauge (readings indicated in psi and kPa) with manual pressure release, 380mm braided hose and GM/Chrysler adapter; Ford adapter and 1.8m fuel drain hose
12-MV5530 Pro Compression Test Kit Includes Ø70mm gauge with high impact lens, rubber boot, and four (4) scales of measure (psi, kg/cm², bar, kPa), attached to 250mm hose and quick release coupler; 14mm short-thread adapter with 165mm and 305mm hoses; 14mm long-thread adapter with 305mm hose; 18mm short-thread adapter with 305mm hose; 14mm short-thread x 18mm long-thread adapter; 10mm thread small engine adapter; 12mm thread small engine adapter; quick-release air hold adapter; custom blow-molded case; field service kit and user manual
12-MV5532 Digital Compression Test Kit Includes digital compression tester comprising of test gauge with rubber boot, 250mm high-pressure hose and female quick-change coupler; 14mm standard reach thread x 165mm hose adapter; 14mm standard reach thread x 305mm hose adapter; 14mm reach thread x 305mm hose adapter; 18mm standard reach thread x 305mm hose adapter;18mm reach male thread x 14mm standard reach female thread plug adapter; 16mm male thread x 14mm standard reach female thread plug adapter; 10mm male thread x 14mm standard reach female thread plug adapter; 12mm male thread x 14mm standard reach female thread plug adapter; air hold adapter; field service kit; custom-molded case and user manual
12-MV5534 Analog Compression Test Kit Includes compression tester comprising of glycerin-filled test gauge with rubber boot, 380mm long high pressure hose and quick-change coupler; custom-molded case and user manual
Vacuum Pressure Test Gauge and Fuel Pump Tester
Fuel Injector Pressure Test KitCompression Tester
Pro Compression Test Kit Digital Compression Test Kit Analog Compression Test Kit
Mity
vac
55Quality Industry Solutions | www.jsgindustrial.com
Engine Diagnostic Equipment (cont.)
PART NUMBER PRODUCT DESCRIPTION
12-MV5535 Digital Diesel Compression Test Kit Includes digital compression tester comprising of test gauge with rubber boot, 380mm long, high-pressure hose, quick-change coupler; adapters MVA5601, MVA5602, MVA5603, MVA5604, MVA5605, MVA5606, MVA5607; injector adapter (Dodge 24 V 5.9L Cummins (1999-2003), 5.9L Cummins ISB and ISBE); injector adapter (Case/Cummins Series “B” 2.9L, 3.9L, 5.9L through 1998); glow plug adapter (GM 4.3L, 5.7L (1978-1985), Navistar 6.9L, 7.3L through 1994); glow plug adapter (GM 6.2L, 6.5L V8); glow plug adapter (Ford/Navistar 7.3L Power Stroke (1994-2003)); glow plug adapter (Volkswagen 1.9L TDI); right-angle adapter; field service kit; custom-molded case; user manual
12-MV5545 Fuel System Test Kit Includes 90mm high pressure gauge with rubber boot, push-button relief valve, and hanging hook; flow meter with borosilicate glass flow tube, patented flow-control valve, and 1 gallon/min maximum flow capability; (2x) 1.2m long flow meter hose; clear bypass and pressure relief hoses; (2x) fuel hose clamp; adapters for connecting to U.S., European, and Asian manufactured cars and light trucks; flow meter faceplates with gallons/minute and liters/minute units of measure; custom molded case; operator manual
12-MVA5552 Pressure Test Accessory Kit Includes 1.2m long fuel pressure test hose; right angle adapter for Schrader style fuel rail test ports with 7/16 x 20 thread; right angle adapter for Schrader style fuel rail test ports with 0.308 x 32 thread; inline adapter for Schrader style fuel rail test ports with 7/16 x 20 thread; inline adapter for Schrader style fuel rail test ports with 0.308 x 32 thread; operator manual
12-MVA5612 Glow Plug Adaptor Includes Mityvac adaptor model 12-MVA5612 (thread size M10 x 1.25) fits the below make and model vehicles; Ford Escort, Lynx, Tempo, Topaz (1984-85); Ford/Mazda 2.0L and 2.2L Ford products including Ranger; Lincoln Mark VII, Continental with Volvo engines; Mitsubishi 2 and 3 cylinder engines, some Fuso; Nissan 2.2L and Medium UD truck; Toyota 2.2L
12-MVA510 GM Test Port Adaptor Fits GM and some Chrysler vehicles with 7/16 x 20 thread test port on fuel rail
12-MVA511 Ford Test Port Adaptor For Ford and some Chrysler vehicles with 0.308 x 32 thread test port on fuel rail
Digital Diesel Compression Test Kit
GM Test Port Adaptor
Fuel System Test Kit
Glow Plug Adaptor
Pressure Test Accessory Kit
Ford Test Port Adaptor
Mity
vac
56 JSG Industrial Systems | General Line Catalogue
Specialty Tools & Equipment
PART NUMBER PRODUCT DESCRIPTION
12-MV5565 Fuel Injection Cleaning Kit Includes fuel injection cleaner assembly with pressure regulator, gauge, valves, fittings, and 950ml canister; 1.2m long connection hose; wall mount bracket and user manual
12-MV5567 Fuel Injection Cleaning Kit Includes fuel injection cleaner assembly with pressure regulator, gauge, valves, fittings, and 950ml canister; 1.2m long connection hose; 16 fuel injection system connectors in custom-molded case (12-MVA565); wall mount bracket and user manual
12-MV5570 Fuel Injection Cleaning Kit Includes fuel injection cleaner assembly with pressure regulator, gauge, valves, fittings, and 950ml canister; wall mount bracket and user manual
12-MV7241 Fluid Transfer Pump Includes hand pump with intake and discharge ports; 2 intake/discharge hoses; 2 intake/discharge hose connectors; inline reducer; air-pressure hose; dipstick hose; instruction manual
Fluid Evacuation & Dispensing Equipment
PART NUMBER PRODUCT DESCRIPTION
12-MV6410 ATF Refill System Includes 5L fluid reservoir; reservoir lid with integrated manual pump, pressure gauge, and pressure relief valve; 1.5m fluid dispensing hose with flow control and auto-shutoff valves; 12-MVA5800 ATF refill adapter kit (includes ten adapters, part No's. 12-MVA580 – 12-MVA589); fluid dispensing wand; hanging hook and user manual
12-MV7201 Fluid Evacuator Plus Includes 5L fluid reservoir; reservoir lid with integrated manual pump, pressure gauge, and pressure relief valve; 1.5m fluid dispensing hose with flow control and auto-shutoff valves; 12-MVA5800 ATF refill adapter kit (includes ten adapters, part No's. 12-MVA580 – 12-MVA589); fluid dispensing wand; hanging hook and user manual
12-MV7400 7.3L Fluid Evacuator Includes fluid evacuator; 5.7mm O.D. x 1.5m long dipstick tube; 6.6mm O.D. x 1.5m long dipstick tube; 10mm O.D. x 1.5m long main evacuation tube; tube adapters and user manual
12-MV6400 Fluid Dispensing System Includes 5L resevoir with integrated pump pressure gauge and relif valve. 12cm dispensing hose with flow control and auto shutoff valve.
Fuel Injection Cleaning Kit
Fluid Transfer Pump
ATF Refill System Fluid Dispensing System 7.3L Fluid EvacuatorATF Refill System
Mity
vac
57Quality Industry Solutions | www.jsgindustrial.com
Brake & Clutch Bleeding Equipment
PART NUMBER PRODUCT DESCRIPTION
12-MV6830 Airbrake Bleeder and Evacuator Includes brake bleeder; 1.8m bleed hose assembly; 1.2m fluid evacuation hose; molded base with screws for bench mounting; automatic fluid refill kit (12-MVA6825); hanging hook; 3 universal bleed screw adapters and user manual
12-MV6835 Premium Vacuum Brake Bleed Kit Includes brake bleeder; 1.8m bleed hose assembly; 1.2m fluid evacuation hose; molded base with screws for bench mounting; clamp-on style automatic fluid refill kit (12-MVA6832); hanging hook; 3 Universal bleed screw adapters and user manual
12-MV6838 Master Vacuum Bleed Kit Includes brake bleeder; 1.8m bleed hose assembly; 1.2m fluid evacuation hose; molded base with screws for bench mounting; master automatic fluid refill kit (12-MVA6832 plus 12-MVA6834); hanging hook; 3 universal bleed screw adapters and user manual
12-MV6840 Pressure Bleed System Includes 5L fluid reservoir; reservoir lid with integrated manual pump, pressure gauge, and pressure relief valve; 1.5m fluid dispensing hose with flow control and auto-shutoff valves; 12-MVA6850 pressure bleed adapter kit (includes seven master cylinder adapters); fluid dispensing wand; hanging hook and user manual
12-MV8020 Selectline Automotive Brake Bleed Kit
Includes Selectline hand vacuum pump (Model No. 12-MV8030); 135ml fluid reservoir bottle with fluid transfer and storage lids; 2 tapered bleed screw adapters; 2 universal bleed screw adapters; 6.4mm I.D. x 40mm long connection tube; 6.4mm I.D. x 610mm long connection tube and user manual
12-MV7605 Hose Clamp This tool works great for clamping flexible coolant, fuel, vacuum and brake lines or hoses up to 1/2” (13mm) in diameter
Pressure Bleed System
Premium Vacuum Brake Bleed Kit
Selectline Automotive Brake Bleed Kit Hose Clamp
Master Vacuum Bleed KitAirbrake Bleeder and Evacuator
Mity
vac
58 JSG Industrial Systems | General Line Catalogue
Pressure Bleed System – 12-MVA812Pressure Bleed System – 12-MVA810Pressure Bleed System – 12-MVA809
Master Auto-Refill KitVacuum Gauge Kit
Brake & Clutch Bleeding Equipment (cont.)
PART NUMBER PRODUCT DESCRIPTION
12-MVA6181 Vacuum Gauge Kit Durable, high-quality vacuum gauge with accurate diaphragm movement, the special stem design allows convenient 360° rotation of gauge and easy pin-release removal. This gauge replaces the original gauge on Mityvac Selectline 12-MV8010 hand pumps or additional option for pumps purchased without gauge. Indicates 0 - 30” of Mercury (0 - 100 kPa) vacuum
12-MVA6836 Master Auto-Refill Kit Includes clamp-on, gravity feed refill kit 12-MVA6832; 1.2L fluid reservoir with transfer and storage lid; base with screw clamp; transfer tube with valve; level adjustment spring; 355ml and 946ml bottle adapters plate-style auto-refill upgrade kit 12-MVA6834; rectangular dual chamber refill plate; round refill plate; adjustable length rubber cords; fluid transfer tubes with connectors; reservoir hanging hook and user manual
12-MVA809 Universal Bleed Adaptor Features universal round cone secured with chain. The 12-MVA809 adaptor is used for varying universal applications and offer a unique adjustable clamping design that applies pressure to the center of the adapter for a more uniform seal
12-MVA810 Universal Bleed Adaptor Features universal round cone secured with chain. The 12-MVA809 adaptor is used for varying universal applications and offer a unique adjustable clamping design that applies pressure to the center of the adapter for a more uniform seal
12-MVA812 Universal Bleed Adaptor Features universal round cone secured with chain. The 12-MVA809 adaptor is used for varying universal applications and offer a unique adjustable clamping design that applies pressure to the center of the adapter for a more uniform seal
Mity
vac
59Quality Industry Solutions | www.jsgindustrial.com
Hand Vacuum Pumps
PART NUMBER PRODUCT DESCRIPTION
12-MVA7210 Transmission Refill Kit Includes shut-off valve and quick connect coupler
12-MV8000 Automotive Test and Bleed Kit Includes Selectline hand vacuum pump (Model No. MV8010) with 50mm gauge; 135ml fluid reservoir bottle with fluid transfer and storage lids; 4 tapered adapters for connecting to tubing from 2.3mm to 13mm I.D.; 2 tapered manifold plugs; 2 tapered bleed screw adapters; 2 universal bleed screw adapters; vacuum line T-adapter; 4mm I.D. x 6.4mm I.D. tubing adapter; rubber cupped adapter; (2) 6.4mm I.D. x 610mm long connection tubes; 6.4mm I.D. x 40mm long connection tube; 6.4mm I.D. x 90mm long fluid pick-up tubes; 4mm I.D. x 75mm long vacuum test tube and user manual
12-MV8010 Selectline Pump with Gauge Includes pinned connection allows 360° gauge rotation for improved visibility and pivoting lever action handle maximizes output with minimal operator effort
12-MV8255 Selectline Pump with Gauge Includes 50mm gauge and pivoting lever action handle maximizes the high output with minimal operator effort
12-MV8500 Silverline Elite Hand Pump Kit Includes Silverline Elite hand vacuum/pressure pump (Model No. 12-MV8510) with Ø50mm compound gauge and rubber boot; 135m fluid reservoir bottle with fluid transfer and storage lids; 4 tapered adapters for connecting to tubing from 2.3mm to 13mm I.D.; 2 tapered manifold plugs; 2 tapered bleed screw adapters; 2 universal bleed screw adapters; 12 vacuum cap plugs; vacuum line T-adapter; 4mm I.D. x 6.4mm I.D. tubing adapter; rubber cupped adapter; (2) 6.4mm I.D. x 610mm long connection tubes; 6.4mm I.D. x 40mm long connection tube; 6.4mm I.D. x 90mm long fluid pick-up tubes; 4mm I.D. x 75mm long vacuum test tube; master cylinder refill kit (Model no. 12-MVA6825); custom molded case and user manual
12-MV8510 Silverline Elite Hand Pump Includes gauge and dual converter
12-MV8121 Selectline Superpump without Gauge
Includes pivoting lever action handle maximizes the high output with minimal operator effort
Transmission Refill Kit
Silverline Elite Hand Pump Kit Automotive Test and Bleed Kit
Selectline Superpump without Gauge
Selectline Superpump with Gauge
Silverline Elite Hand Pump
Mity
vac
60 JSG Industrial Systems | General Line Catalogue
Hand Vacuum Pumps (cont.)
PART NUMBER PRODUCT DESCRIPTION
12-MVM8900 MV8510 Pump Rebuild Kit Service kit for Silverline hand pump, model 12-MVM8510
12-MVM8903 MV8255 Maintenance Kit Service kit for Selectline hand pump, models 12-MV8255 and 12-MV8257
12-MVM9002 MV7201 Retrofit Kit Includes lid gasket and valve-to-reservoir tube with pressure relief valve
12-MVM4100 Silverline Maintenance Kit Service kit for discontinued hand pump, models 12-04010 and 12-04555
12-MVM5100 Superpump Maintenance Kit Service kit for discontinued hand pump, models 12-MV6212, 12-MV6210 and 12-MV6265
12-MVM6100 Pump Maintenance Kit Service kit for discontinued hand pump, models 12-MV6206, 12-MV6203 and 12-MV6255.
12-MVA6170 Compound Gauge Compound pressure gauge max. pressure 200 kPa
12-MVA6176 Compound Gauge Durable, high-quality 2” diameter compound vacuum/pressure gauge with accurate gearless diaphragm movement and protective rubber boot. Special stem design allows convenient 360° rotation and easy pin-release and removal
12-MV5546 Fuel Preesure Test Kit 30mm high-pressure gauge with rubber boot, push-button relief valve, and hanging hook. 1.2m hose, 1/4 turn valve, 37 assorted adapters for US, European and asian manufactured vehicles. Pressure relief hose, customer molded case.
Compound Gauge
Compound Gauge
MV8255 Maintenance Kit Silverline Maintenance Kit
Superpump Maintenance Kit Pump Maintenance Kit Fuel Preesure Test Kit
MV8510 Pump Rebuild Kit
MV7201 Retrofit Kit
Mity
vac
61Quality Industry Solutions | www.jsgindustrial.com
Accessories
PART NUMBER PRODUCT DESCRIPTION
12-MVA6000 Complete Auto Accessory Kit Includes (4) tapered adapters for connecting to tubing from 2.3mm to 12.7mm I.D.; (2) tapered manifold plugs; (12) color-coded vacuum line plugs; (2) universal bleed screw adapters for connecting to hydraulic bleed screws; automatic master cylinder refill kit; 4.5oz reservoir bottle with fluid transfer and storage lid; (2) 6.4mm I.D. x 610mm long connection hoses and user manual (English/French)
12-MVA6001 Fluid Transfer Kit Includes 135ml capacity reservoir bottle with fluid transfer and storage lids; 6.4mm I.D. x 40mm long) connection tube; 4mm I.D. x 75mm long connection tube; (2) 6.4mm I.D. x 90mm long fluid pick-up and connection tubes; rubber cupped adapter; 4mm I.D. x 6.4mm I.D. tubing adapter; (4) tapered adapters for connecting to tubing from(2.3mm I.D. to 12.7mm I.D.; (2) tapered manifold plugs; Ø70mm mason jar lid; Ø84mm wide-mouth mason jar lid; 6.4mm I.D. x 1220mm long connection tube; adapters for tubing sizes 3.2mm - 13mm O.D. (1/8” - 1/2” O.D.) and 6.4mm - 9.5mm I.D. (¼” - 3/8” I.D.) and 9.5mm I.D. x 1220mm long connection tube
12-MVA6006 Extended Tube Kit Includes 5.7mm O.D. x 2.4m long dipstick tube with connector; 6.6mm O.D. x 2.4m long dipstick tube with connector; 10mm O.D. x 2.4m long main evacuation tube with connector
12-MVA6007 Dual Adaptor Bleed Kit Includes clear 6.4mm I.D. hoses and two universal bleed adapters
12-MVA6910 4oz Reservoir Kit Includes 135ml capacity reservoir bottle; Fluid transfer lid; Fluid storage lid and 6.4mm I.D. x 90mm long fluid pick-up tube
12-MVA660 Power Steering Adaptor For use with Mityvac hand vacuum pumps to reduce bleed time following power steering repairs. Universal cone-shaped design fits snuggly into the neck of many power steering reservoirs, to form an air-tight seal when vacuum is applied
Complete Auto Accessory Kit
Dual Adaptor Bleed Kit
Fluid Transfer Kit 4oz Reservoir Kit
Extended Tube Kit
Power Steering Adaptor
62 JSG Industrial Systems | General Line Catalogue
FIRE EXTINGUISHERS
Fire
Ext
ingu
ishe
r
63Quality Industry Solutions | www.jsgindustrial.com
All Muster extinguishers; comply to Australian Standard AS/NZS 1841.6, and include stainless steel handles, brass valves and powder coated red finish.
Portable
PART NUMBER PRODUCT CAPACITY RATING
43-G1ABE-FF2 ABE, Dry Chemical Powder 1.0kg 1A20BE
43-G1.5ABESVB ABE, Dry Chemical Powder 1.5kg 2A20BE
43-G2.5ABEVB ABE, Dry Chemical Powder 2.5kg 3A40BE
43-G4.5ABE ABE, Dry Chemical Powder 4.5kg 4A60BE
43-G4.5ABEHP ABE, Dry Chemical Powder 4.5kg 4A80BE
43-G6ABE ABE, Dry Chemical Powder 6.0kg 4A80BE
43-G9ABE ABE, Dry Chemical Powder 9.0kg 6A80BE
43-G9ABEHP ABE, Dry Chemical Powder 9.0kg 6A80BE
43-G3.5CO2 Carbon Dioxide (CO2) 3.5kg 5BE
43-G5CO2 Carbon Dioxide (CO2) 5.0kg 10BE
43-G9LAFFF AFFF Foam 9.0L 3A30BE
43-G7LWC Wet Chemical (W/C) 7.0L 3A4F
43-G9LAW Air / Water 9.0L 3A
Automatic & Trolley Mounted
PART NUMBER PRODUCT CAPACITY
43-M6KGAuto79 ABE Automatic ABE 6kg
43-M9KGAuto79 ABE Automatic ABE 9kg
43-M30ABEM ABE Trolley Mounted 30kg
43-M50ABEM ABE Trolley Mounted 50kg
43-M70ABEM ABE Trolley Mounted 70kg
43-M90ABEM ABE Trolley Mounted 90kg
43-M50BEM BE Trolley Mounted 50kg
43-M45CO2M CO2 Trolley Mounted 45kg
43-M30LAFFF AFFF Trolley Mounted 30L
43-M50LAFFF AFFF Trolley Mounted 50L
43-M70LAFFF AFFF Trolley Mounted 70L
43-M90LAFFF AFFF Trolley Mounted 90L
Carbon Dioxide (CO2)ABE
AFFF Foam Wet Chemical
Air / Water
ABE Automatic
ABE Mobile
Carbon Dioxide (CO2) AFFF Foam Mobile
FIRE EXTINGUISHERS
Fire
Ext
ingu
ishe
r
64 JSG Industrial Systems | General Line Catalogue
Servicing Requirements
All extinguishers have to be inspected every six months. Checks include:
� Hydrostatic testing date stamp is within 5 years
� Extinguisher gauge is within operating range
� Previous test and servicing dates are marked on a metal tag attached to each unit
� The entire extinguisher is undamaged including the cylinder body, valve handle and hose/horn
� Safety pin is undamaged
� Area has no new hazards present that may be outside of the extinguisher’s capability
� If partially discharged, an extinguisher will require specialised workshop refilling
Extinguisher Servicing
Fire Extinguishers installed in all commercial, public and multi-occupancy residential buildings all need to be regularly inspected and tested. The inspection, test and maintenance procedures for fire extinguishers are specified in the Australian Standard AS 1851 ”Maintenance of Fire Protection Systems and Equipment”.There are some key points that the general community and property owners should be aware of, to ensure they receive the appropriate level of servicing.
Servicing Personnel
� Servicing technicians need to identify themselves to a person responsible for the building before completing any work
� The service personnel should sign off all necessary documentation and then explain what service work they are charging for
� Small and large service companies carry out extinguisher servicing. Only in Queensland do the service technicians need to be licensed
� There are courses in extinguisher maintenance available nationally. These courses are not relevant if the company is only supplying the pre-stamped new extinguisher
Type of Fire, Class and Suitability
EXTINGUISHING AGENT
WATER WET CHEMICAL
FOAM POWDER ABE
POWDER BE
CARBON DIOXIDE
VAPORISING LIQUID
FIRE BLANKET
A Wood, paper, and plastic
LIMITED LIMITED
B Flammable and combustible liquids
LIMITED LIMITED LIMITED
C Flammable gases LIMITED
E Electrically energised equipment
F Cooking oils and fats
Fire
Ext
ingu
ishe
r
65Quality Industry Solutions | www.jsgindustrial.com
Portable Extinguisher Support & Accessories
PART NUMBER PRODUCT DESCRIPTION
43-FS100 Fire Blankets 1.0m x 1.0m
43-FS120 Fire Blankets 1.2m x 1.2m
43-FS128 Fire Blankets 1.2m x 1.8m
43-FS180 Fire Blankets 1.8m x 1.8m
43-SILS Location Signs – Extinguisher Generic ID Sign and silhouette
43-SILS-ANGLE Location Signs – Extinguisher Generic 90° ID Sign and silhouette
43-SABE Location Signs – ABE Powder ID Sign and application details
43-SAF Location Signs – Foam ID Sign and application details
43-SW Location Signs – Water ID Sign and application details
43-SWC Location Signs – Wet Chemical ID Sign and application details
43-SC02 Location Signs – C02 ID Sign and application details
43-WVBC25 Fixed Vehicle Bracket Suits 2.5kg
43-WVBC45 Fixed Vehicle Bracket Suits 4.5kg
43-WVBPC9 Fixed Vehicle Bracket Suits 9.0kg
43-WVBOC45 Over Centre Vehicle Bracket Suits 4.5kg
43-WVBOC9 Over Centre Vehicle Bracket Suits 9.0kg
43-WUVL Extinguisher Bags Suits 6kg - 9kg
43-WUVS Extinguisher Bags Suits 4.5kg
M2ST01 9” Security Ties Thick tamper proof seals
M2SP01 Service Punch Maintenance punch(numbered 1 to 5)
M2TT01 Date Tag Metal Aluminium
M2SR01 Date Tag Split Ring Split ring to secure tag
43-HREEL36 Standard Fire Hose Reel AS/NZ 1221 approved. Zinc plated construction. 1350 kPa working pressure.
43-HRC-HD Hose Reel Cover Heavy duty PVC
43-HRC Hose Reel Cover Outdoor heavy duty
43-HRCF Hose Reel Cover Fitted
Location Signs
Standard Fire Hose Reel
Outdoor heavy duty Hose Reel CoverHeavy duty PVC Hose Reel CoverFitted Hose Reel Cover
Extinguisher BagsFire Blanket
66 JSG Industrial Systems | General Line Catalogue
QUICK REFERENCE
67Quality Industry Solutions | www.jsgindustrial.com
Piston & Electric Pumps
PART NUMBER POWER SIZE RATIO/TYPE
DELIVERY DESCRIPTION COMMENT PAGE
48-GP7241 Air 12 - 20kg 58:1 1500g/min GP72 Series Pump Only 10
48-GP7247 Air 20 - 30kg 58:1 1500g/min GP72 Series Pump Only 10
48-GP7273 Air 50 - 60kg 58:1 1500g/min GP72 Series Pump Only 10
48-GP7294 Air 180 - 200kg 58:1 1500g/min GP72 Series Pump Only 10
48-GPM6594 Air 180 - 200kg 58:1 4100g/min GP 62 Series Pump Only 10
48-KP7247E Air 18 - 30kg 58:1 600g/min GP72 Series Pump Trolley Kit 11
48-KP7247P Air 18 - 30kg 58:1 600g/min GP72 Series Pump Carry Kit 11
48-KP7294HR Air 180 - 200kg 58:1 600g/min GP72 Series Pump Wall Kit 11
48-DP4117 Air Oil Stub Pump 4:1 21L/min DP41 Series Pump Only 22
48-DP6117 Air Oil Stub Pump 6:1 15L/min DP61 Series Pump Only 22
48-DPL6122 Air Oil Stub Pump 6:1 18L/min DP61 Series Pump Only 22
48-DPL612294 Air 205L 6:1 18L/min DP61 Series Pump Only 22
48-KP41M110 Air 205L 4:1 21L/min DP41 Series Pump Wall Kit 21
48-KPL41M110 Air 205L 4:1 26L/min DP41 Series Pump Wall Kit – High Flow 21
48-KP61M110 Air 205L 6:1 15L/min DP61 Series Pump Wall Kit 21
48-KP61M110HR Air 205L 6:1 15L/min DP61 Series Pump Wall Kit for Hose Reel 21
48-KP4194SC Air 205L 4:1 10L/min DP41 Series Pump Kit with Meter 21
48-KP41OILSPI Air 1000L IBC 4:1 10L/min DP41 Series Pump Kit 21
48-KP41OILSPIAV Air 1000L IBC 4:1 10L/min DP41 Series Pump Kit 21
52-142100-03 12 VDC 205L Gear 15L/min L5016 Pump Kit 18
52-118000-9 12 VDC Adjust. to 205L Gear 30L/min P-200-BV Pump Kit 18
52-142100-02 230 VAC/50 Hz 205L Gear 30L/min L5132 Pump Kit 18
15-F0031002A 24 VDC Gear 4L/min Viscomat 60/1 Oil Pump Pump only 18
15-F0031001A 24 VDC Gear 10L/min Viscomat 60/2 Pump only 18
15-F00303M00 230 VAC/ 50 Hz Vane 50L/min Viscomat 90 M Pump only. 18
15-000303000 415 VAC/three phase Vane 25L/min Viscomat 90T Pump Pump only 18
15-F00268000 12 VDC 205L Gear 5L/min Viscomat 60/1 Pump Kit Pump kit 18
15-F00263210 12 VDC 205L Gear 6L/min Viscotroll 120/1 Pump and Trolley Kit
Pump Trolley Kit 18
15-F0026303D 230 VAC/ 50 Hz 205L Gear 9L/min Viscotroll 200/2 Pump and Trolley Kit
Pump Trolley Kit 18
48-DP411794NK Air 205L 4:1 22L/min Pump Only 28
QUICK REFERENCE GUIDE
GREASE OIL WASTE OIL DIESEL WATER & CHEMICAL ADBLUE
Continued on next page
68 JSG Industrial Systems | General Line Catalogue
PART NUMBER POWER SIZE RATIO/TYPE DELIVERY DESCRIPTION COMMENT PAGE
52-110000-99 12 VDC Adjust. to 205L Gear 57L/min M-150S-ML Pump Kit – Manual Nozzle 31
52-110000-100 12 VDC Adjust. to 205L Gear 58L/min M-150S-AU Pump Kit – Automatic Nozzle 31
52-133240-1 12 VDC Adjust. to 205L Vane 95L/min M3025-ML Pump Kit – Manual Nozzle 31
52-133240-2 12 VDC Adjust. to 205L Vane 96L/min M3025-ML Pump Kit – Manual Nozzle 31
52-133260-01 24 VDC Adjust. to 205L Vane 97L/min M3425-ML Pump Kit – Manual Nozzle 31
52-133260-02 24 VDC Adjust. to 205L Vane 98L/min M3425-AD Pump Kit – Automatic Nozzle 31
52-133210-01 230 VAC/50 Hz Adjust. to 205L Vane 64L/min @ 50 Hz M-3260-ML Pump Kit – Manual Nozzle 31
15-00021800B 12 VDC Adjust. to 205L Vane 50L/min Piusi 205L Drum Pump Kit Pump Kit 31
15-00021900B 24 VDC Adjust. to 205L Vane 50L/min Piusi 205L Drum Pump Kit Pump Kit 31
15-000271P00 230 VAC/ 50 Hz Adjust. to 205L Vane 56L/min Panther 56 drum pump kit Pump Kit 31
15-000272P00 230 VAC/ 50 Hz 230 VAC/ 50 Hz Vane 56L/min Panther 56 drum pump kit with meter
Pump Kit 31
52-118000-1 12 VDC No pick up tube Gear 45L/min GPI P-120H-2UR Pump Only 38
52-118000-2 12 VDC No pick up tube Gear 30L/min GPI P-200H-2UR Pump Only 38
48-DP2101 Air No pick up tube 2:1 50L/min DP21 SERIES Pump Only 38
48-DP411794NK Air 205L 4:1 22L/min DP41 SERIES Pump Only 38
52-118450-22 12 VDC 205L Gear 45L/min P-120DEF-2TC-PO Pump Only 46
52-118450-32 12 VDC 1000L IBC Gear 45L/min P-120DEF-2TC-TOTE Pump Kit – Automatic Nozzle 45
52-118450-14 12 VDC 205L Gear 45L/min P-120DEF-BRL Pump Kit – Manual Nozzle 45
48-KP21ADBSP1 Air 1000L IBC 2:1 26L/min DP21 SERIES Pump Kit – Manual Nozzle 45
48-DP2101 Air No pick up tube 2:1 50L/min DP21 SERIES Pump Only 46
GREASE OIL WASTE OIL DIESEL WATER & CHEMICAL ADBLUE
Electrical Supply Reels
PART NUMBER DESCRIPTION MAX. POWER MAX. CABLE LENGTH
PAGE
48-ROLLMAS22015 Compact Cable Reel with Cable 240 VAC/50 Hz 15m 49
48-ROLLMAJ22025 Compact Cable Reel with Cable 240 VAC/50 Hz 25m 49
24-SD2030 Static Discharge Reel 9m 49
24-SD2050 Static Discharge Reel 15m 49
24-SD2050N Static Discharge Reel 15m 49
23-CM141-43 Cable Master Reel 600 VAC 3 Pole 35amps 6m 50
23-CM164-83 Cable Master Reel 600 VAC 8 Pole 35amps 18m 50
23-S16-621-43 Series "S" Cable Reel 600 VAC 4 Pole 35amps 20m 51
23-S16-801-43 Series "S" Cable Reel 600 VAC 4 Pole 35amps 24m 51
69Quality Industry Solutions | www.jsgindustrial.com
Diap
hrag
m P
umps
PART
NUM
BER
BODY
M
ATER
IAL
FLUI
D CO
N-
NEC
TION
SM
AX. F
LOW
RA
TE
MAX
. AIR
PR
ESSU
RE
NOI
SE L
EVEL
SDI
APHR
AGM
M
ATER
IAL
VALV
E/BA
LL
VALV
E SE
AT
O-RI
NGS
AP
PLIC
ATIO
N
51-A
050-
BAA-
GGPN
-000
Alum
iniu
m1/2
” BSP
F56
.8L/
min
(1
5 gp
m)
8.2
bar
(120
psi
)80
Dba
(with
muf
fler)
Geol
ast
Geol
ast
Poly
prop
ylen
eBu
na-N
3219
27
51-A
050-
BAA-
VVAV
-000
Alum
iniu
m1/2
” BS
P F
56.8
L/m
in
(15
gpm
)8.
2 ba
r (1
20 p
si)
80 D
ba (w
ith m
uffle
r)Vi
ton
Vito
nAl
umin
ium
Vito
n32
1927
51-A
B-10
-P15
Alum
iniu
m1”
BSP
155.
8L/m
in
(41
gpm
)8.
2 ba
r (1
20 p
si)
80 D
ba (w
ith m
uffle
r)Ge
olas
tGe
olas
tPo
lypr
opyl
ene
Nitr
ile32
1927
51-A
200-
BAA-
VVYV
-000
Alum
iniu
m2”
BSP
F71
9L/m
in
(190
gpm
)8.
2 ba
r (1
20 p
si)
76 D
ba (w
ith m
uffle
r) 10
3 Db
a (w
ithou
t)Vi
ton
Vito
nN
ylon
Vito
n32
1927
51-A
N-3
0-P1
5Al
umin
ium
3” B
SP F
965L
/min
(2
55 g
pm)
8.2
bar
(120
psi
)86
Dba
(with
muf
fler)
Nitr
ileN
itrile
Poly
prop
ylen
eN
itrile
3219
27
51-P
B-05
Poly
prop
ylen
e1/2
” N
PT/
BSP
64.6
L/m
in
(17
gpm
)8.
2 ba
r (1
20 p
si)
83 D
ba (w
ith m
uffle
r)Ge
olas
tGe
olas
tPo
lypr
opyl
ene
Nitr
ile39
3939
51-N
C-10
-P15
Poly
prop
ylen
e1”
BSP
155.
8L/m
in
(41
gpm
)8.
2 ba
r (1
20 p
si)
80 D
ba (w
ith m
uffle
r)Ge
olas
tGe
olas
tPo
lypr
opyl
ene
Nitr
ile39
3939
51-P
B-10
Poly
prop
ylen
e1”
AN
SI/
DIN
Fla
nge
155.
8L/m
in
(41
gpm
)8.
2 ba
r (1
20 p
si)
80 D
ba (w
ith m
uffle
r)Ge
olas
tGe
olas
tPo
lypr
opyl
ene
Nitr
ile39
3939
51-B
K-10
V-P1
5Po
lypr
opyl
ene
1” B
SP15
2L/m
in
(41
gpm
)6.
8 ba
r (1
00 p
si)
80 D
ba (w
ith m
uffle
r)Vi
ton
Vito
nPo
lypr
opyl
ene
Vito
n39
3939
CH
EMIC
AL
GL
YCOL
W
ATER
DIES
EL
OIL
W
ASTE
OIL
70 JSG Industrial Systems | General Line Catalogue
Hose Reels
PART NUMBER SERIES MAX. HOSE SIZE
MAX. HOSE LENGTH
SWIVEL INLET THREAD
OUTLET THREAD
MAX. WORKING PRESSURE
APPLICATION
48-MC601210 MC 1/2” 10m 1/2” BSP M 1/2” BSP M 840 psi 42 42 24
48-V181315 V 1/2” 15m 1/2” BSP M 1/2” BSP M 250 psi 42 42
48-VL601220 VL 1/2” 20m 1/2” BSP M 1/2” BSP M 840 psi 42 42
48-BG181325 BG 1/2” 25m 1/2” BSP F 1/2” BSP M 840 psi 42 42 24
48-BG600115 BG 1” 15m 1” BSP F 1” BSP F 840 psi 42 42
48-VX4H3815 * VX 3/8” 15m 3/8” BSP F 3/8” BSP M 5600 psi @ 150°C 42
48-VGLX101915K ** VGLX 3/4” 15m 19mm 3/4” BSP F 140 psi @ 150°C 42
48-V601215 V 1/2” 15m 1/2” BSP M 1/2” BSP M 840 psi 24
48-VGL603415 VGL 3/4” 15m 1” BSP M 3/4” BSP F 840 psi 24
48-VGL101910ADB VGL 3/4” 10m 19mm 19mm 140 psi 47
48-VGL101915ADB VGL 3/4” 15m 19mm 19mm 140 psi 47
48-VGM600115 VGM 1” 15m 1” BSP F 1” BSP M 840 psi 24
48-V4G1415 V 1/4” 15m 1/4” BSP F 1/4” BSP M 6000 psi 13
48-VL4G1420 VL 1/4” 20m 1/4” BSP F 1/4” BSP M 5600 psi 13
48-VL4G3815 VL 3/8” 15m 3/8” BSP F 3/8” BSP F 5600 psi 42 13
48-VL4H3820 VL 3/8” 20m 3/8” BSP F 3/8” BSP M 5600 psi 42
48-V181315 V 1/2” 15m 1/2” BSP M 1/2” BSP M 250 psi 36
48-VG603408 VG 3/4” 8m 1” BSP M 3/4” BSP M 840 psi 36
48-VGL102510GO VGL 1” 10m 1” BSP F 1” BSP M 120 psi 36
48-BGL102525GO BGL 1” 25m 19mm 1” BSP M 140 psi 36
Note: * High pressure hot wash. ** High flow, high temperature wash.
AIR WATER OIL GREASE DIESEL ADBLUE
Notes
Every effort has been made to ensure all information and photographs contained in this publication were correct and accurate at time of printing, however no warranty is given in respect of this publication and JSG Industrial Systems Pty Ltd (JSG) shall not be liable for any error therein. Technical information, specifications and products shown may be subject to change without prior notice. Pictures shown are for illustration purposes only. WARNING: For sale and proper use consult instructions, the supplier or JSG. Contact your nearest JSG Distributor for latest information.
© 2016 JSG Industrial Systems Pty Ltd., All rights reserved. GL0316
www.jsgindustrial.com
HEAD OFFICE
Unit 1, 21 Amour St Revesby NSW 2212
PO Box 333 Milperra NSW 2214
Ph: (02) 9914 8720 Fax: (02) 9914 8798
Email: [email protected]
Sydney | Melbourne | Perth | Brisbane | Adelaide | Townsville | Mackay | Indonesia