jobsite np final revised 2014

INSIDE

SALES - SERVICE - RENTALS

CONSTRUCTION IDEAS AT WORK

TOLL - FREE(800) 874-7415LOCAL(317) 684-7474FAX(317) 684-7484624 S. Missouri StreetIndianapolis, IN 46225Hours: Monday - Friday 6am - 5pm Saturdays - 7am-12pm April thru October

Concrete Accessories.............Precast Supplies....................Forming & Shoring.................Rental Advantages.................Chemicals..............................Equipment.............................Safety....................................Measuring & Layout................Super Slab Package................Decorative Concrete...............Hand Tools............................Power Tools...........................Jobsite Protection..................Water Proofing & Residential..INDOT..................................Masonry................................Partnerships..........................Fasteners & Adhesives............Everyday Jobsite Supplies.......Meet Our Sales Team.............

2-91011-1415-1617-2122-2930-3738-39, 4240-4143-4950-5556-6061-6465-6869-7071-747576-787980

Jobsite Supply Mission Statement

Jobsite Supply’s mission is to be the premier provider of innovative solutions for the construction industry. Our

passion for serving our customers builds lasting partnerships based on honesty and integrity. Our

commitment to our people creates growth and opportunities in an atmosphere of mutual respect.

And our focus on continuous improvement in everything we do drives us to consistently deliver more than expected.

www.jobsitesupply.com

Concrete AccessoriesSafety

Masonry Decorative Concrete

INDOTForming & Shoring

Visit our Web Order Pad @jobsitesupply.com

CONCRETE ACCESSORIES

www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225

Plastic Cone Snap Tie

Light Forming

Snap Tie Standard & Heavy

Sure-Snap Hex Head Tie

Tie HolderHair Pin

Flat Ties

Turnbuckle Form Aligner

Adjustable Kicker

Loop Panel Tie, Standard & Heavy

Gang Loop Panel Tie, Standard & Heavy

Gates D Cone Tie

Cam-Lock Bracket & 1-piece Waler Bracket

Frog Leg Bracket & Z Tie Holder

Jahn “A” Bracket

Light Forming

Jahn “C” Bracket

Scaffold Bracket

Sure Guard Rail Post System

Heavy Forming

Coil Tie

Coil Rod1/2” x 12’3/4” x 12’1” x 12’

Thread Bar

Cast Hex Nut & Steel Hex Nut

Wing Nut & Swivel Wing Nut

Hex CouplerCoil & National Course

Coil Bolt

Adjustable Coil Bolt1/2” x 18”1/2” x 24”

Heavy Forming

Flat Washer

Coil Nut & Handle Coil Nut

She Bolt

Inside Tie Rod

Thread Bar She Bolt

Taper Tie

Thread Bar Taper Tie

Heavy Forming / Form Hangers

Wing Nut

Batter Washer

Crimped Pigtail Insert

Nut Washer

Adjustable Weld Angle Bracket

Euro Rod15mm - Hot Rolled20mm - Hot Rolled

Spring Clamp

Formwork Hammer GSType TH 8012



Inserts & Other Accessories Bridge Deck Forming Interior HangersCoil Loop Insert

Expanded Coil Insert

Loop Ferrule Insert

Thin Slab Ferrule Insert

Shelf Angle Insert

Ductile Embed

Flared Coil Loop Insert

Double Flared Coil Loop Inserts

9-Wire (9W)

Rod Clamp

Coil Half Hanger

Rock Anchor

Screw Anchor & Screw Anchor Bolt

Rebar Safety CapDisc 10

Sure Guard Rebar Protective Cap

Pres-Steel Hanger Type 1

Pres-Steel Hanger Type 2 & 7

Pres-Steel Hanger, Type 4

Pres-Steel Hanger Type 1-A

Pres-Steel Hanger

Pres-Steel Hanger Type 4-A & Type 5-A

Bridge Deck Forming Exterior Hangers

Pres-Steel Half Hangers

Adjustable Joist Hanger

Pres-Steel Hook Hanger Type 1B & Type 2B

Ty-Down Half Hanger

Exterior Half Hangers

Coil Rod Hangers

Bridge Deck Forming Exterior Hangers

Adjustable Half Hangers

Fillet Clip & Haunch Carrier

Bridge Overhang Bracket

Bridge Deck Forming

Bridge Overhang Bracket for Deep Girders

Bridge Overhang Bracket (W)

Heavy Duty Bridge Overhang Bracket

Guard Rail Speed Bracket Assembly

Pencil Rod Wedge Clamp

Tensioner for Wedge Clamp

Pencil Rod Spring Clamp

90o Hooked Dowel-In


CONCRETE ACCESSORIESWire Bar Supports - Plain & Epoxy

Slab Bolster

Plastic Bar Supports (cont.) Paving

Slab Bolster Upper

Beam Bolster

Beam Bolster Upper

Continuous High Chair

Continuous High Chair Upper

Bar Chair

Individual High Chair

Plastic Bar Supports

EZ Chair

Straddle Chair

Tower Chair

Bar Chair

Continuous High Chair

Continuous High Chair - Upper

Slab Bolster Upper

Strongback Slab / Beam Bolster

Rebar Splicing

Dowel Bar Splicing System

Optional Clipped FlangeStandard Flange

Dowel Bar Splicer

Coupler with Flange

Coupler without Flange

Double Ended Dowel-In

180o Hooked Dowel-In

End Anchorage System

Dowel-In Straight

Male End Anchor

Double End Anchor

End Anchor

Wire Baskets (without Dowels)

Expansion Basket

Contraction Basket

Tie Bar Assembly

Dowel Bars

Tie Bars

Dowel Caps

Crimp Type Welded Type

1-1/4” Notch Plastic Caps

Screed Chair Bases

Standard Screed Base

Screed Base with Sand Plate

Joist Type Adjust-able Screed Base

Screed Base for Steel Deck

Screed Bases Drive Type

Cradle Heads (Pipe Holders)

Dot specified Epoxy

Plass Wheel

DSA Double Stud Anchors



Paving (cont.)Screed Key Joint

Paving Stakes

Basket StakeMat Stake

Channel Stake

Fabric Stake

FS Stake MS Stake PS Stake

Visit jobsitesupply.com

for Standard Layouts & Instruction on

How to Build Light Formwork

34CDX 3/4x4/8 CDX Plywood (46BK)12CDX Plywood 1/2” CDX 4ply 4x8 SHT14HBSE Masonite 1/4x48x96 50/Bunk34Douglas Plywood 3/4 Class 1 Doug Fir34HDO Plywood 3/4” HDO 4x8

2416 2x4x16’ SPF #2 or better (294BK)2616 2x6x16’ SPF #2 or better (189BK)

Visit Us Online @ www.jobsitesupply.com

Stock Forming Plywood

Forming Lumber

Anchor Bolts

3/8” X 6” to 1” X 36” Plain & Galvanized Steel

*Quantity Discounts *

Gates D Cone Tie

Cam-Lock Bracket

Frog Leg Bracket

Concrete Accessories

Welded Wire FabricWelded Wire Fabric in 8’x15’ Sheets &

5’x150’ RollsSizes in-stock: 4x4 4/4, 6x6 6/6, 6x6

8/8, 6x6 10/10Call for Delivery to your Job!

Galvanized & Epoxy Coated Available - Call for Quote

Concrete Bricks

4”x1-1/4” x 8” Bricks

Tie Wire & Bar Ties

Coil wire is available in black annealed & bonded plastic coated. Bar ties available in black annealed

& bonded plastic coated.

Bar Ties4” to 12” & bundles of 5000 pieces

Accessories

Wire Reels Rachet Bars

Bar Tie Twisters

Gullwing

Sonotube® Column Forms

• Easier to handle, set, strip & discard.

• Stands strong, even in wet weather

• Superior strength-to-weight properties

• Available in diameters from 6” to 60”

Tie Breaker Tools

Other Forming Accessories

RC6 Adjustable coil tie - use with 1/2” coil rodRH6 Rebar hook for up to #6 rebarFN450 4 1/2” foam nail with metal washer - 100bxFN550 5” foam nail with metal washer - 100bxFN650 6 1/2” foam nail with metal washer - 50bx



STAY FORM

BT2 Break off tool for simplex/duraform tiesBT10 Tiebreaker heavy duty break off tool

WC 3/4 Wood Chamfer Strip (10)WCC Wood Chamfer CutterWCCB Wood Chamfer Cutter Replacement BladeWC1 1” Wood Chamfer (10’ Strips)WC112 1-1/2” Wood Chamfer (10’)WC12 1/2” Wood Chamfer12HR 1/2” Half Round (Drip Bead) 8’3412R 3/4” Half Round Drip Bead 8’

Wood & Rubber Chamfers

Concrete Chutes

700187 12’ Alum Concrete Chute700188 16’ Alum Concrete Chute700191 20’ Alum Concrete Chute960805 HVY DTY Slurry ChuteCC992F 12’ Concrete ChuteCC996F 16’ Concrete Chute

• Constructed of heavy gauge aluminum

• Reinforced with cross braces & flanged edges

• Durable & lightweight

Form Liners

ST08 thru ST608” thru 60” IN STOCK

Assembled Rebar Cages

*Call for pricing on assembled cages

The Diamond Dowel® System helps you:

• Collect retainage• Reduce call backs• Save labor• Optimize the amount of

steel in a project• Deliver serviceable

slabs-on-ground• Shorten construction

schedules

14DD 1/4” Diamond Dowel System38DD 3/8” Diamond Dowel System


Rebar Fabrication Services @ Jobsite Supply• Custom Cuts & Bends• Custom Fabrication & Pre-Tied Cages to Your Plan Specifications

Custom Rebar Fabrication

We offer custom shapes, assemblies, cages, and

many more designs made out of rebar. Many custom

bends available!

317.684.7474


One-sided forming made easy.

Loop-Coil™ Ties provide a convenient way to do one-sided forming. Secure lengths of 1/2” coil rod into drilled holes in existing wall with drop-in anchors, rock anchors, epoxy or other means. Then screw on Loop-Coil™ Ties to proper wall thickness & attach to modular panels.• Form walls as thin as 4” • No time consuming cranking out of Plylags after stripping• Leaves minimal mark in surface of wall

Modular Systems - Loop Coil™ Tie (transition tie)

Twister Bull Float Bracket

• Fits 1 3/8” & 1 3/4” push button handles• Universal mounting that fits any 2 or 4 hole bull float without adapter

Tie Wire & Contractor Wire

MMW 16 Gauge Tie Wire

MMWSSSharkskin 16 Gauge Epoxy Coated Tie Wire

Metal Imbeds

Call for Special Pricing

CONCRETE SLAB & FORMING ACCESSORIES

Under Slab Vapor BarrierVapor retarders save time, money and energy by reducing moisture migration under concrete slabs and foundations, and through inner walls and ceilings. We have a wide variety of vapor retarder products to choose from that are readily available.

Raven-10 10mil - 15x200’ Vapor BlockRaven-15 15mil-12x200’ Vapor Block

Vapor TapeFor protective sealing, hanging,

seaming, slicing & patching applications

Eliminate Ineffeciency of Wood Bracing

Steel Forms

Surfaces

Save 30-60% in Labor Costs! The Adjustable Kicker is perfect for jobs such as flyer tables for hi-rise buildings,

monolithich pours, bridge decks, slabs on grade & curbs. It works on all surfaces & can be attached to either wood or steel forms. When the job is done, it detaches & folds down easily.


Polyethylene Sheeting

Available in Clear, Black, Reinforced, Non-reinforced & Flame Retardant Rolls 100’ Long & 1 Mil to 10 Mil Thickness

Pallet Pricing Available

Snap Handles & Bumpcutters

701164Blade Only

1.5”x3.5x16’ Bumpcutter

700524

• 1-3/4” x 6’ aluminum snap handle• Fits bull floats, channel floats & adjustable heads

See page 50 for a full line of Marshalltown Products.

Slab Bolsters & High Chairs

Jobsite Supply stocks Slab Bolsters & High Chairs

to Suit ANY Job

Epoxy Coated Available

Visit jobsitesupply.com

Continuous &Individual

8”-16”

20” Base Length

Adjustable KickerAK-8

CURB FORMING


The Only Completely Reinforced Forms• Available in sizes from 4’

to 18’ or higher• Self Aligning Forms• Applications: Edge

Forms, Footers, Industrial Slabs, Foundations,

Curbs & Gutters, & Flatwork• Made in the USA

• Tension Winch SL310Radius clips are available in flatbar, rod and PVC pipe styles. Choose from the SL 114 Flatbar, SL 115 3/8” Road, SL 118 3/4” PVC Pipe and the SL 119 1” PVC Pipe

• Stringline SL140The SL 140 stringline features diamond braided polyester with core. Available in blue, fluorescent yellow, orange or white on 1,000’ spools.

• Radius ClipsRadius clips are available in flatbar, rod and PVC pipe styles. Choose from the SL 114 Flatbar, SL 115 3/8” Road, SL 118 3/4” PVC Pipe and the SL 119 1” PVC Pipe.

• Radius MaterialThe SL 151 Flat Fiberglass Bar features no thermal expansion, excellent flex-ibility, and is made in a highly visible yellow color. Made of durable fiberglass, the SL 151 comes in 8’4” and 16’8” lengths.

SL141 Diamond Braided Polyester with Core. Yellow

SL142 Diamond Braided Polyethylene with Core. Yellow

SL143 Diamond Braided Kevlar with Core. Yellow

• Stringline Rods SL110Downward Bend Stringline Rod fetures angled entry slot. Made of cold drawn steel & is corrosion resistant.

• Clamps SL121stringline clamp features teardrop shaped holes, independent clamping capabilities, steelbox construction ALL are corrosion resistant.

MC550• Engine: 15HP

Kohler or 13 HP Honda recoil start

• Available Augers: 6” sold or hollow

• Wheels: (9) 8”x2” hard rubber

• Weight: 760 lb.

4 DEECURB DEE 4 x 10 Straight Curb Form4 DEEFLEX DEE 4 X 10 Flex Form6DEECURB DEE 6 x 10 Straight Curb Form6DEEFLEX DEE 6 x 10 Flex Form8DEECURB DEE 8 x 10 Straight Curb Form8DEEFLEX DEE 8 x 10 Flex Form

SL114 FlatbedSL115 3/8” RodSL118 3/4” PVC PipeSL119 1” PVC Pipe

SL151C Flat Fiberglass Bar ConnectorSL155 3/8” Fiberglass RodSL155C 3/8” Fiberglass Rod Connector

SL122 Clamp with Instanjust® Spring Action, Made of Heat Treated Steel. No Bolts or Wrenches.SL23 Stringline Clamp Features Precision Shaped Holes & Independent Clamping

SL111 Upward BendSL112 Threaded Line w/ Replaceable

Line Tip (SL116)SL116 Plastic Line Tip - Durable Nylon,

Self-Threading

Steel Concrete Forms Accessories

PF4 4” Board x 12PF6 6” Board x 12PFCC Camlock

• Radius Work• Straight Work• Light Weight

• No Nailing• Fast Setup• Easy Cleaning

AT3701 Flourescent Orange93900 White InvertedETBL2D Blue InvertedSO3641 Flourescent Green Inverted03622 Hot Pink Inverted

Inverted Spray Paint

Curb Builder

36LATH 36” pine lath stakes48LATH 48” pine lath stakes

Reusable Concrete Flatwork

Super Shim PackRL-67• 1” Thick

Econ-O-Shim®

Stack ShimSS16• For the precast/tilt-up

industry• Comprehensive strength of 10-12,000 PSI • Length 3-1/2”, Width 1-15/16”, Slot 5/8”

DDESLAURIERS

Seamless Steel Slump Cone SCSE7• 8” diameter

base, by 4” top, by 12” height clean, smooth edges


Coil InsertsHundreds of styles & sizes to choose from:• 2-4 Strut Inserts• Loop Inserts• “L” Leg Inserts• Open Coil Inserts• Thin Slab Inserts• Pick-up Inserts• Ductile Coil Inserts• Edge Pick-up Inserts• Locator Plugs• Coil Nut• Flat Washer• Coil Rod & Bolts

Hundreds of styles & sizes to choose from:• Ductile Ferrule Insert• Ferrule Loop Insert• Ferrule Wing Insert• Four Strut Thin Slab• NC Precast Concrete Insert• Open Ferrule insert• Plastic Insert Cup• Standard Ferrule Insert• Straight Loop Ferrule Insert• Threaded Plastic Insert Plug• Thin Slab Parallel, 2-Strut• Thin Slab Ferrule Insert, 2-4 Strut

Ring Lift SystemPopular 2-10T spall free lifting system with a variety of accessories for every application:• Two Hole Anchor• Double-Tee Anchor• Drop Forged Foot Anchor• Plate Anchor• Uni-Anchor• Wavy Tail• Bolt & Wing Nuts Assemblies• Sandwich Panels• Ring Bail or Cable Lifting Hardware• Shear Bars• 2-Hole Erection Anchor• X-Foot Erection Anchor• New Generation Erection Anchor• 22 XL Anchor

Easy Lift SystemSimple economical way to lift barriers, pipes, boxes & slab panels between 4-8” thick:• Original EASY LIFT ANCHOR• 5-Ton Foot Anchor• Foot Anchor with Snap

Wires• Easy Lift 500 Anchor• Magnets & Wet Set Plates

PRECAST PRODUCT LINESFerrule/NC Threaded Inserts

Popular 1-25T spall free lifting system with a variety of accessories for every application:• DB Anchor• DB Eye Anchor• Bolt & Wing Assembly• Face Lift Directional• Hardware• Recess Formers• Rubber Grommets• Shear Bars

DB Anchor Lift System

Pipe BraceGreat for bracing forms when stacking forms for higher walls. The Pipe Brace comes in 3 different lengths to accomodate a wide range of wall heights.

7-1/2’ to 14” Pipe Brace14’ to 23-1/2’ Pipe Brace23’ to 39’ Pipe Brace

• For the precast/tilt-up industry• Comprehensive strength of 10-

12,000 PSI • Length 3-1/2”, Width 1-15/16”,

Slot 5/8”

Many other types of straight & V-style shims are available.

Call your Jobsite Supply representative for more

information.(317) 684-7474

Econ-O-Shim®

Stack ShimSS16

Super Shiim PackRL-67• 1” Thick

FORMING

EZ-GANGFor Straight Walls & Custom ApplicationsEZGang™ is Jobsite Supply’s pre-built system for straight walls. This is a great system for repetitive pour situations where panel width & height stay the same. It is a versatile system that uses she-bolts or taper ties.

• Built To Order • Arrives At The Jobsite Ready To Use• Weighs Only 9Lbs. Per Sq/Ft• Widths Up To 12’-0”• Compatible With All Domestic Form

Systems

JS 1500• Compatible with all Handset

Systems• 1500 PSF• Birch Facing• JS 1500 Panel Makes Column

Forming Easy & Efficient

EZ-Gang Forming System Shown with Trailing Waler Assembly


EZ-Gang Forming System Atlanta, GA

EZ-Gang Forming System Core Wall System

JS 1500Form Finish with She-Bolt

JS 15002 Ties Per PanelZero Lumber

EZ-RADIUS

FORMING & SHORING

CFP 2000 & UNIPLY• Hinged Corners Increase Production• Premium Birch Facing• Tieless to 36”• Superior Finish• 2000lb SF Rated

• JS MAX• EZ-Shore• Megashore• Titan HV


SHORING SYSTEMSDesigned to Maximize Efficiency & Reduce Materials & Labor

Jobsite Supply provides a wide range of shoring systems that are engineered precisely to your structure & load requirements. Our Systems Approach is focused on providing the most efficient & cost effective system for the job. No two jobs are alike, so our versatile systems & multiple strategic alliances allow us to provide the most suitale solution for each project.

EZ-Shore with HICO Beams

Uniply after Forms Stripped with Liner

CFP 2000Hinged Corner

Increases Production

Titan HV

Ischebeck Megashore

JS-MAX

FORMING


COMPLETE JOBSITE FORMING &

SHORING SOLUTIONS

Custom Engineering and Fabrication

Precision Pre-Built Forming Systems

Modular Clamping Gang Forming Systems

Water & Sewage Treatment Plant Systems

Commercial / Industrial Structure Specialists

All panels are powder coated. In doing so, the paint is baked into the panel which allows for a long form-life & easy concrete clean up.

Exact corner joints eliminate tolerance build-up over large areas.

Angle struts are spaced on 12” centers to provide strength, uniform concrete & minimize deflection.

Handles are provided on panels for easy handling in setting and stripping forms.

1/2” plywood is riveted to angle struts. Plywood tolerance is closely maintained to assure long form life.

Side & end rails are rolled from 55,000 psi steel & welded continuously at corners for maxi-mum strength.

Rear, side & end rail dados are located at 6” on center to allow optimum accessory location.

Front & rear contact points prevent group seepage & permit true form alignment with adjacent panels.

2” wide angle strut allows for more weld for added strength

Tie Systems

SHORING EQUIPMENT


EZ-SHORE FRAME - 10K/LEG

Part # Description Weight Std. Pkg.

C412400 2’x4’ “Z DIM” - Locking Spacing 3’ 37.0 25/B

C412500 2’X5’........................................4’ 45.0 25/B

C412600 2’X6’........................................4’ 58.0 25/B

C414400 4’X4’........................................3’ 46.0 25/B

C414500 4’X5’........................................4’ 54.0 25/B

C414600 4’X6’........................................4’ 67.0 25/B

EZ-SHORE FRAMES

DBL. HOLE ANGLE CROSS BRACEPart # Description Weight Std. Pkg.

C024404 3’&4’X4’...........3’&4’ Lock Spacing 11.0 100/B

C024405 3’&4’X5’...........3’&4’ Lock Spacing 13.1 100/B

C024406 3’&4’X6’...........3’&4’ Lock Spacing 15.0 100/B

C024407 3’&4’X7’...........3’&4’ Lock Spacing 16.7 100/B

C024408 3’&4’X7’...........3’&4’ Lock Spacing 18.4 100/B

C024410 3’&4’X10...........3’&4’ Lock Spacing 22.0 100/B

POST SHORES

HICO BEAMS 059, 610, 915, 1119

Part # Description Weight

C024404 3’&4’X4’...........3’&4’ Lock Spacing 11.0

C024405 3’&4’X5’...........3’&4’ Lock Spacing 13.1

C024406 3’&4’X6’...........3’&4’ Lock Spacing 15.0

C024407 3’&4’X7’...........3’&4’ Lock Spacing 16.7

4 1/2”

Cross Section Box Member

9 3/4”

3 1/2”

8 1/4”

Cross Section I Member

Part # Min. Hts Max Hts Weight

PS350 6’-5” 11’-6” 48lbs.

PS550 10’-0” 18’-0” 79lbs.

ClampC88

Screw JackC462400

Hitch PinC442310

RivetC442300

ConnectorC442310

Nail PlateC443100

U-HeadC451189

A-Clamp920

Leg PlateC471000

1’&2’ Tie Bar


RENTAL ADVANTAGES

Many Items Listed In Our Newspaper Are Available For Rent!

Compare the cost of renting to purchasing on an hours-worked basis and you may discover that renting equipment is more COST EFFECTIVE

for your project.

JOBSITE SUPPLY Rental Advantages

• RIGHT EQUIPMENT FOR THE JOBRight Size, Right Type, Right NOW!

• NO WAREHOUSING OR STORAGEReturn idle equipment to our convenient

downtown location

• CONSERVATION OF CAPITALUse working capital money for more

profitable uses

• DELIVERY & PICKUP AVAILABLEKeep employees working on the job

• REDUCE MAINTENANCE COSTSJobsite Supply staffs trained mechanics

• NEW & LATE MODEL EQUIPMENTRental fleet updated yearly

• CONTROL COSTSKnow your job costs quicker &

eliminate hidden costs

• TRY NEW EQUIPMENT BEFORE BUYINGTake equipment for a “Test Drive”

EQUIPMENT RENTED BY THE DAY, WEEK OR MONTHEXPERIENCE THE RENTAL ADVANTAGE TODAY!


RENTAL ADVANTAGESWE WILL MEET OR BEAT ANY COMPETITORS

PRICING ON IN FLEET ITEMSRIDING TROWELS

We Service What We Sell...

& Even What We Don’t!CONSTRUCTION IDEAS AT WORK

• In-House Repair Shop & Parts Program •

STAMPS • SCREEDS • CUT-OFF SAWS • GENERATORS • MATERIAL SPREADERS • VIBRATORS • LIGHT TOWERS • PNEUMATICS • ROTO HAMMERS • AND MANY MORE ON OUR WEBSITE


1 Day ServiceStihl Tune-Ups

INCLUDES FILTER, PLUG, FUEL FILTER, ROPE

ONLY $49.95REGULAR $69.95

BRING IN THIS COUPON FOR

10% OFF PARTS & LABOR ON YOUR NEXT VISIT

UP TO $100624 S. Missouri St. - Indianapolis - 46225

SOFF-CUT SAWS GEORGIA BUGGIES PLATE COMPACTORS

PROWLERS GRINDERS WALK-BEHIND TROWELS

CHEMICALS

PRODUCTSFORM RELEASE • JS Super2 • JS Form ReleaseCURING COMPOUNDS• White Cure WaxCURING & SEALING COMPOUNDS• JS Cure & Seal VOC• JS Cure & Seal 25 LV• JS Crystal Clear Cure & Seal-VOC• JS Crystal Clear 30%• JS Crystal Clear Matte• JS Supreme Seal 30% (Sealer Only)• JS Natural Seal • JS Salt Guard Max• JS Salt Guard Cure Seal• JS Honey BrownLIQUID/SEALERS - HARDNERS• JS Salt Guard Max• Ameripolish• Ashford Formula• Diamond Hard - Euclid• L&M - FGS/Permashine SystemCEMENTITIOUS REPAIR PRODUCTS• JS Concrete Quick Fix• JS Epoxy Crack Filler - 818• JS 110 Epoxy Mortar• JS All Patch 5 LT 5m• JS All Patch 20• JS All Patch 20 LT• JS All Patch 20 LT Silver• JS Wallcrete• JS Special Patch w/ Bonding Agent• JS Strong Bond• JS Vertical Patch• JS Quick PatchGROUTS• JS621 Construction Grout• JS1107 Precision Grout• JS 14K Structural GroutFLOOR LEVELERS• JS UniflowRETARDERS / EVAPORATION• JS Aquafilm• JS Aquafilm Concentrate• JS Surface Retarder SURFACE RETARDER• JS Cast Violet 03• JS Cast Light Blue 05• JS Cast Yellow 15• JS Cast Gray 100• JS Surface Retarder

EPOXY COATINGS • JS 015 Epoxy - Tan, Med. Gray,

LT Gray, Clear• JS 137M• JS 137MUV• JS 139 Flexible Epoxy • JS 100LVP High Build Epoxy Primer• JS 707 & 707LV High Build Epoxy• JS 380 Fast Set Epoxy Binder• JS 210 Epoxy Skidproofer• JS 357 PAVOC• Acrylic 7EPOXY SEALERS• 830 Fast Set Flexible Joint Sealant• 829 Flexible Joint Sealant• 821 Fast Set GelEPOXY REPAIR PRODUCTS • JS110 Epoxy Mortar• JS818 Epoxy Crack FillerURETHANES• Urethane Clear (1 & 5 Gallon Units)• JS 356 Pavoc Aliphatic Urethane• JS 030 Waterbased Urethane• JS 358 High Wear Urethane• JS 901 Urethane Cement

SOLVENTS/STRIPPERS• JS Citrox• JS Stripper Remover HD• JS SolventDECORATIVE CONCRETE PRODUCTS• JS Crystal Clear VOC• JS Crystal Clear VOC Matte• JS Supreme Seal VOC• JS Cure Seal VOC• JS Super Grip• JS Solvent• JS Salt Guard Max• JS Liquid Release -

“Bubblegum”• JS Wax Gloss• JS Wax Matte• JS Natural Seal• JS Honey Brown VOCSPECIALTY PRODUCTS• Aluminum Oxide• JS 820 Oil Stop Primer• JS 551 River Rock Binder• JS 901 Urethane Cement• JS Hydro Plug• JS Post Rock• JS Concrete Dressing • Torginol Flakes - 1/4” -

Wombat or Shoreline


VIEW OR DOWNLOAD

PRODUCT DATA SHEETS AT

jobsitesupply.com

CHEMICALS


JS Super 2• The best value form release agent anywhere!• Provides easy and clean form stripping. Produces

bright and stain-free concrete surfaces.• Minimizes bugholes and surface defects.• Protects and maximizes life of formwork.• Easy and pleasant to work with.• Prevents concrete build-up from occuring.• Reduces labor costs of form cleaning.• Protects forms from damage and rapid

deterioration.• VOC Compliant.

JS Crystal Clear Cure & Seal• Ideal curing and sealing compound for decorative

concrete to preserve natural look.• Excellent water retention.• Low viscosity for easy application.• Reduces cracking, crazing, spalling and dusting.• Insures optimum strength of cured concrete.• Non-yellowing.• One coat application. Reduces cleaning and

maintenance costs.• Quick drying.• Prevents penetration of most oils and greases.• High solids.STANDARDS• Meets AASHTO-M198, Type 1, Class A & B• Meets ASTM C-309, Type 1, Class A & B• Meets Corps of Engineers CRD-C-300, Type 1• ASTM C-1315, Type 1, Class A

JS All Patch• General purpose, non-shrink, cementitious

patching material.• Designed for horizontal and vertical appliations.• Formulated to be placed in consistencies ranging

from puttty to plastic.• Used for a variety of concrete repairs ie: colums,

beams, slabs, steps, sidewalks, driveways, concrete walls and precast members.

• Can be trowelled into place on both horizontal and vertical surfaces.

• Contains air entraining agents which make it well suited to freeze-thaw resistance.

JS Wall Crete• Resurface and repair vertical concrete

surfaces.• Very fine blend of Portland Cement,

aggregates and admixtures to leave an ultimate smooth finish.

• Light gray color to match existing concrete.

• Leaves a bondable surface for paints or coatings.

• Featheredge - 1/8” thickness.• Excellent bond strength to substrate.• Smooth and creamy workability.

JS1107• High performing precision grout.• CRD C-621; ASTM C-1107, Grade C.• Non-metalic, non-shrink.• High early strength• Placement versatility; drypack; plastic,

flowable and fluid consistencies - pump-able.

• Ideal for precise grouting applications; machinery baseplates, compressors, tanks and installation of anchors and dowels.

JS Special Patch• A two-component, polymer modified,

cementitious repair mortar.• ASTM C-928 - Rapid Hardening Mor-

tar Demonstrates high compressive strengths; ideal overlay or patch for heavy traffic areas.

• Easy-to-use system; no water or measuring needed.

• Accepts foot traffic in 1 hour, heavy traffic in 4 to 6 hours.

TAKE CARE OF YOUR CONCRETE WITH JOBSITE SUPPLY

BRAND CONCRETE CHEMICALS

CHEMICALS


PARTNERSHIPS

3Mwww.3M.comAdhesives Technologywww.atc.ws

Concrete Anchoring, Epoxies, Dowing, Epoxy Bonding, Concrete Joint Filling, Epoxy Repair, Maintenance/Restoration and Other Specialty Applications.

Americrete www.americrete.com

Decorative Overlays, Water Based Stains and Sealers, Garage Floor Epoxies, Marble Tek Epoxy, Stampable Overlays for Horizontal & Vertical Applications.

Ashford Formulawww.ashfordformula.com

The world’s most widely used concrete densifier.

BASFwww.basf.comSonnebornwww.sonneborn.com

Kure & Seals, SL1, NP1, Bonding Agent, Liquid Hardener, Grout, Patching Compound, Joint Sealants, Caulks, Adhesives, Damproofing and Waterproofing Products.

Brickform a Division of Solomon Colorswww.brickform.comwww.solomoncolors.com

Decorative Products, Concrete Stamps, Color Hardeners, Release Agents, Acid Stains, Liquid Integral Colors, 300 Plus Colors in Stock for Same Day Delivery.

Carlisle Coatings & Waterproofingwww.carlisle-ccw.com

Waterproofing Products, Air and Vapor Barrier, Deck Coating Technologies.

Cetco www.cetco.com

Remedial Waterproofing Products, Waterproofing Systems, Concrete Joint Waterstops, Subsurface Drainagge Products.

Chemmaster Coating Technologieswww.chemmasters.net

DOT Approved Products, Waterproofing Prodcts for Concrete and Masonry.

Diedrich Technologieswww.diedrichtechnologies.com

Environmentally Friendly New Masonry Cleaning, Restoration and Water Repellent Products.

Euclidwww.euclidchemical.com

Curing and Sealing Compounds, Dry Shake Floor Topping, Grouts, Joint Fillers and Sealants, Floor and Deck Treatments

Hill &Griffithwww.grifcote.com

Concrete Form Release Agents, VOC Compliant

ITWwww.itwredhead.com

Concrete Anchoring Solutions, Adhesives, Mechanical, Screw Products.

Kemikowww.kemiko.com

Acid Stains, Waxes, Sealers High Gloss or Flat, “Remebrandt Polymer Stains”.

Laticretewww.laticrete.com

Adhesives, Grouts and Mortars, Waterproofing for Floors and Walls, Leveling Compounds and Wear Surfaces, Concrete Repair Materials.

L&M Chemicalswww.lmcc.com

Form Release Agents, FGS Permashine, FGS Conditioner, Evaporation Retardents, Floor Hardeners, Seal Hard.

LM Scofieldwww.scofield.com

Colored Concrete, Concrete Stain, Stamped Concrete.

Metacaulkwww.metacaulk.com

Firestop and Firestopping Products

Mapeiwww.mapei.us

Waterproofing, Concrete Restoration Systems, Patching and Shimcoating Compounds, Concrete Repair, Self-Leveling Underlayments.

Simpson Strong Tiewww.strongtie.com

Joint/Crack Fillers.

RectorSealwww.rectorseal.com

Firestop Products

Tremco Commercial Sealants & Waterproofingwww.tremcosealants.com

Joint Sealants, Glazing Sealants, Glazing TapesGlazing Extrusions, Fire Protection SystemsBelow-Grade Waterproofing MembranesAir Barriers, Drainage Mats, Deck CoatingsWide Expansion Joints, Primers

Versaflexwww.versaflex.com

Pure Polyureas, Joint Filling, Concrete, Water and Waste Waer, Rapid Curing Sealants and Coatings.

Western Materialswww.westernmaterials.com

DOT Patching Products

WR Meadowswww.wrmeadows.com

Expansion Joint Material, Moisture/Vapor Barrier Products.

Xypexwww.xypex.com

Concrete Crystallization Products, Concrete Waterproofing by Crystallization

CHEMICALS


GAMMACURE• Curing agent designed

specifically for Xypex Crystaline waterpoofing products.

• May eliminate the need for water during the Xypex coating in some cases

C2000• Unique chemical treat-

ment for the water-proofing & protection of concrete

• Can seal hairline cracks up to 0.4 mm

XM50• Applied as a second

coat over Concentrate, Modified produces a harder finish

• Speeds the curing of Concentrate

XPP66• Formulated as a

crystalline, fast setting, non-shrink, high bond strength, hydraulic cement compound for concrete repairs

• Stops flowing water in seconds

A7 Adhesive Anchoring System

A7L• All weather formula,

down to 0o and below• Fast curing time, 35

min at 60oF• Works in damp holes

and underwater applications

A710• All weather formula,

down to 0o and below• Fast curing time, 35

min at 60oF• Includes nozzle and fits

A100 tool

E24XL Epoxy nozzle 1/2” use with G5 & C6 epoxyE102 Epoxy gun for C6-18oz. or G5-22oz.A100 Epoxy dispensing tool fo ruse with A7-10

Concentrate

Gamma Cure

Modified

Patch n’ Plug

#1 - Level, patch and repair as needed

#2 - Grind to your desired finish

#3 - Harden and densify your polished concrete with FGS/Hardener Plus

#4 - FGS/PermaShine polished concrete. See the results for years

to come.

Call Jobsite Supply for Certified Applicators of FGS PermaShine!

Crackbond LR321 Ultrabond HS-200 Ultrabond 1 Ultrabond 1300 Ultrabond 2100 Ultrabond 2300 Speed Set 2 Ultrabond 365

♦ Lane Tie Repairs ♦ Sound Wall Erecting ♦ Barrier Expansion ♦ Sign Installation ♦ Pile Splicing ♦ Highway Patching

♦ Highway Reflectors ♦ Light Poles ♦ Curb/Sidewalk Repair ♦ Guard Rails ♦ Bridge Construction

FOR ALL THESE APPLICATIONS AND MORE...

INDOT APPROVED EPOXIES: Repair ProductProperty Damage is

Everywhere, Fix it All with 1 Product!

• Fix Loose Rails• Repair Cracks• Bond Broken Concrete

• Repair Spalls/Holes• Fill Control Joints• Fill Bug Holes

MS-2A Patch Material (65lb Bag)MS-2C Antimocrobial Patch (65lb Bag)Plug Water Plug (50lb Pail)Epoxy Strongseal Epoxy 15 Gallon KitProfile Structural Patch (65lb Bag)QSR Hydrolic Cement (40lb Pail)Hi Per Reinforced Patch (65lb Bag)

A9-MB1350HN

Visit us online atwww.jobsitesupply.com

CHEMICALS


Planicrete® AC

Acrylic Latex Admixture for Mortar and Concrete. One-component, concentrated liquid latex admixture

used to enhance the performance of cementitious repair mortars, plasters, stuccos, concrete mixes and toppings for the restoration of horizontal, verti-cal and overhead concrete; concrete masonry units (CMU); and masonry surfaces.Packaging: Jug: 1 U.S. gal. (3,79 L)Pail: 5 U.S. gals. (18,9 L)Drum: 55 U.S. gals. (208 L)

Planicrete® UA

Universal Latex Additive.Next-generation, water-based,

one-component, concentratedliquid latex admixture used to enhance the performance of sev-eral MAPEI products, including mortar mixes. Using Planicrete UA as part of the designated design mixes willincrease product performance in the areas of bond, flexural and tensile strengths in addition to increased dura-bility and enhanced workability.

Packaging: Jug: 1 U.S. gal. (3,79 L)Pail: 5 U.S. gals. (18,9 L)

Planitop® 18Fast-Setting, Flowable, One-Component Repair

Mortarone-component, shrinkage-compensated, fast-setting,cementitious repair mortar that is suited for all interior/exterior horizontal concrete repairs, including bridgedeckoverlays, parking-garage floor repairs and varioushorizontal DOT concrete repairs.This product includes High-Hydrated Cement Technology

Packaging: Bag: 50 lbs. (22,7 kg)Pail: 50 lbs. (22,7 kg)

Admixtures

Concrete Repair Mortars

Primers for Self-Leveling

Primer L®

Advanced-Technology Acrylic Latex Primer for ConcreteA concentrated, solvent-free acrylic primer used prior to theinstallation of underlayments and top-ping materials. It isgreen for easy identification. It im-proves the bond between aproperly prepared and profiled concrete substrate, and selflevelingunderlayment or topping materials

Packaging: Pail: 5 U.S. gals. (18,9 L)Jug: 1 U.S. gal. (3,79 L)Primer WE™

Primer WE® Water-Based Epoxy Primer

A two-component, polymer-modified, solvent-freewater-based epoxy primer for enhanced adhesionto nonporous substrates prior to the applicationof MAPEI self-leveling materi-als. When mixed, it

is purple for easy identification. It improves adhesionover smooth, nonabsorbent and difficultto-bond-to substrates such as properly prepared ceramic tile, cement-basedterrazzo, old cutback adhesive residue and approved plywood subfloors.Packaging: Kit: 2 U.S. gals. (7,57 L)Part A, Pail: 5 U.S. gals. (18,9 L)Part B, Pail: 5 U.S. gals. (18,9 L)

Self-Leveling Underlayments

Novoplan® 2

Professional Self-Leveling UnderlaymentHigh-strength, self-leveling, cement-based underlaymentand repair mix for interior concrete and engineer-approvedfloors. Suited for leveling, smoothing and repairing interiorfloors before the installation of floor coverings. Ceramic tileand natural stone can be installed 24 hours after application.

Floor coverings – such as carpet, vinyl sheet goods, vinyl tile, vinyl composition tile (VCT), homogenous PVC, rubber and engineered wood plank – can be installed 1 to 3 days after application, depending upon thickness of application. Packaging: Bag: 50 lbs. (22,7 kg)

Repair ExpoxiesPlanibond® EBA

Epoxy Bonding Agent and PrimerTwo-component, multipurpose epoxy bondingagent and primer. Planibond EBA isnon-shrinking, 100% solids and moistureinsensitive. (Note: This is not a moisturereduction barrier coating.) Planibond EBAis used primarily as a primer

for MAPEI selfleveling materials, and as a bonding agent for screeds and repair mortars, with applications for cor-rosion protection and crack repair. Planibond EBA meets ASTM C881 requirements.Packaging: Kit: 2 U.S. gals. (7,57 L)Part A: 5 U.S. gals. (18,9 L)Part B: 5 U.S. gals. (18,9 L)

Patching & Skim Coating

Mapecem® Quickpatch

Interior/Exterior, Fast-Setting, High-Flow Concrete Patch Versatile, fast setting, cementitious material used for the patching of interior/exterior concrete surfaces including concrete floors, driveways, sidewalks andconcrete pads. Mapecem Quickpatch features extraordinary ease of placement, with a variable water ratioand outstanding workability. When used for horizontal substrate repair before application of self-leveling un-derlayments, Mapecem Quickpatch

sets fast for easy and cost-efficient repairs, minimizing job-site turnaround time.Packaging: Bag: 40 lbs. (18,1 kg)

Joint Filler & Repair

VersaFlex SL/75 is a self-leveling, 100% solids, flexible, 2 component, rapid curing polyurea elastomer joint filler. Designed for 10-15% movement of installed joint width.

• 100” Solids• Flexible-460-500%

Elongation• Remains Flexible in Cold• Odorless - No Toxic Vapors• USDA/FSIS/CSA Approved• CFIA Approved

SL75NOPIG600 SL 75 Cartridges - No PigmentSL75RYNO600 SL 75 Cartridges - Ryno GraySL75XNOZZ SL 75 NozzlesSL7510GLNOPIG SL 75 10 Gallon Units - No Pigment

KOLDFLO1 Kold Flo 1-Gallon BottleUPM-BLUE UPM Winter Cold Patch- 50#UPM-Green UPM Spring-Fall Cold Patch-50#UPM-Yellow UPM Summer Cold Patch 50#

Patches

Concrete Mender

• Ultra Low Viscosity in Neat Configuration Will Penetrate Concrete for Permanent Bond

• Cures in 30 Minutes for Quick Open to Traffic

• Will Cure at -30°F. • Cure Time Will Be Extended at Lower

Temperatures• Mixed with Industrial Quartz Sand will Make

a Durable Polymer Concrete


EQUIPMENT

14” Cutquik® Saw EWCTS420-14

• Easy adjust-ment of water flow while cutting

• Water control remembers last setting used

12” Cutquik® Saw TS410

• 64CC engine

• 3.6” depth capacity

• Able to be mounted on cart with adapter kit

Cutquick® Cart4223007100• Specially

designed for matched cutting per-formace

• High impact resistant wheels with sealed ball bearings

INTRODUCING THE NEW Stihl TS-500i

The TS 500i Cutquik has 17% more power and 15% more cutting speed compared to the TS 420, yet weighs only 6% more.

A low-emission engine provides optimal torque throughout the rpm range and eliminates the need for a choke. The

computer-mapped fuel injection system continuously and precisely de-termines fuel mixture, injected quantity, injection and ignition timing. An electronic water control feature allows for easy and efficient water flow

adjustment while cutting.

Visit Jobsite Supply

to find out more!

42010071041 Depth wheel kit for cart

Safety Harnesses

TS 500i Cutquik®

• Low emission engine• Optimal torque throughout

the rpm range

Backpack BlowerBR550• Powerful and fuel-efficient,

low-emission engine with improved durability

• Three-position adjustable blower tube with increased wear area nozzle

• High quality, durable harness with dual adjustments and STIHL logo

• Simplified starting procedure• Single-handed operation

Blower 25.4 CC EngineBG55Power through outdoor clutter with the BG 55 STIHL HomeS-caper Series™ handheld blower. Featuring a round nozzle for increased air volume, this gas leaf blower quickly clears leaves and grass clippings from driveways and sidewalks.

MS 180 Chain Saw - 16”MS180EZ-14Features the Easy2Start™ system, making this chain saw virtually effortless to start. Perfect for cutting firewood or felling trees up to 12 inches in diameter, it is a lightweight practical chain saw with convenient features you can rely on.

MS250C-16 18” Gas Chainsaw

FCBKM Curb Lawn Edger

HTKMPole Pruner

HLKMStraight Hedge Trim Attachment

KM55RPower Head

Kombi-System with Accessories

BGKMBlower

FS-KMTrimmer

EQUIPMENT

ZP303 H 3” Centrifugal PumpZP303• 5.5 HP Honda

engine• 14,700 GPH, 25

ft. max lift, 105 ft. of head

• 3” suction & discharge

MVC-88• 4.8 HP Honda

Engine• Plate size:

19.7” x 20.7”• Centrifugal

force: 3450 lbs.

MT-75HS• 3,200 Impact, 144.OCC

Robin EC-12D/G, oil bath lubrication

MVC-82• 4.8 HP Honda Engine• plate size: 17.7” x 22”• Centrifugal force: 3080

lbs.

High Cycle VibratorMT-75-H• VA-1A Controller powers one VH-32,

42 or 52 vibrator.

NEW - HHXD5• Patented

swing-away upper frame design

• Helical gearboxes

HTX4445• 8’ Hydrostatic 2-in-1

heavy duty gear boxes with shaft driven cooling fans

Ride-On Power Trowels

HHN34TVDTCSL5• 8’ Mechanical• Twin Pitch Control

HTN28KTCSL • 34.0 HP Turbo

Van-guard diesel engine

• Non-overlapping twin 48’ blades

2’ Edging TrowelC-4-2H• 2.5 HP • Honda G100K2QA• Includes QuickPitch

handle

3’ TrowelJ336 H55• 5.5 HP • Honda GX-160 • 4 blades

Hydrostatic Ride-On Power Trowels

Walk-Behind Power Trowels


Concrete Vibrators

Centrifugal Pumps

Rammers

Plate Compactors

FOR SALEOR RENT!

• Laser-controlled accuracy.• Screeds to higher tolerances

than conventional methods.• Works well with various

slump and mix designs.• Better concrete

consolidation than hand-held vibratory screeds or roller screeds.

• Lightweight & easy • maneuverability.

Mini Screed C

Superior productivity and flatness with the Mini Screed™ C. Its what you have come to expect from Somero®

The CopperHead XD is the right machine for contractors who want better performace when you encounter difficult applications such as:• chaired rebar• lower slumps• poor subgrades

3.0OSCHX030

EQUIPMENT

Metal Cutting Wheels

24051• 14”x3/32”x1” iron worker

abrasive blade

20060• 4-1/3”x1/4”x7/8” metal grinding wheel• 25/Box

Tools

1-1/8”x6”x14” Moil Point1421019

1-1/8”x6”x14” Narrow Chisel1421030

3” Chisel 1-1/8” Shank1421040

5” Asphalt Cutter 1-1/8” Shank 1421045

Ground Rod Driver 1-1/18” Shank 1421806

Bushing Tool 1-1/8” Shank142848

Rivet Buster 4181 Puler

CP 1210CP 1240

CP 1230

CP 4131


12” JS HD Cured* $9514” JS HD Cured* $99

22021 4-1/2”x.045x7/8 Thin Cut Off Wheel-25/bx23336 6”X.045X7/8 Thin Cut Off Wheel-25/bx23420 12”x1/8”x20mm Metal Blade-10/bx23423 12”x1/8”x20mm Concrete Blade-10/bx23455 14”x1/8”x20mm Metal Blade-10/bx23458 14”x1/8”x20mm Ductile Iron Blade-10/bx23460 12”x1/8x1” MAC Blade-10/bx

Portable or Towable Generators

Call for Sales or Rental

(317) 684-7474

CPM-10-10” Scarifier• Side loading

large drum as-sembly

• 10” wide cut - removes 3/16” per pass

• Vacuum port standard for dust-free cutting

Grind Stripper• Round shroud gets

tight against walls• Easy rolling 10” steel-

core, rubber wheels• Lifting eye for easy

loading & unloading

• Up to 8” working width• Up to 1/8” working depth per

pass• power source over drum to

eliminate vibration & maximize surface contact

CPM-8-8” Scarifier

Floor Prepping Equipment

Grind Stripper• Dual counter

rotating discs prevent maching from pulling side to side

• Includes 2 multi-accessory discs

• Includes water mist system & vacuum port

Quick Change Multi-Accessory Disc

General Purpose Grind - Removes General Purpose Epoxy, Mastics, Thinsets, Water-proofing Coatings and more. Double Diamond Dots, Single Diamond Dots & PCD Accessory available.

JS Diamond Blades - 1” Arbor w/ 20mm Bushing

Soff-Cut Diamond Blades

• Concrete Floor Saw Blades, Hi-Speed Cutoff Saw Blades, Masonry Saw Blades, Tile Saw Blades, Power Tool Blades

EQUIPMENT

6” Decorative Concrete Prowler SawX150D

• 4 1/2 HP Robin engine• A preset depth of cut• 3 different size guide wheels, for

1/8”, 1/4” & 1/2” saw joint

The ProwlerX150

• 4 1/2 HP Robin engine• Depth of Cut 1” to 1-3/16”• Light to medium duty use

Soff-Cut 2000X-2000

• 9 HP Robin engine• Depth of cut: 1.5”• Medium to heavy duty use

Soff-Cut 5000 PaverX-5000

• 27 HP Kohler engine• Depth of Cut: 2” - 4”• Heavy duty, mulit-purpose, highways, runways & paving uses

Power CuttersConcrete Saws


Hummer Screed 2MVPR100H• 4-stroke honda engine• Balanced for Easier Lift• Longer Life

PR 100 ScreedPR100C• Use Inside• No Start Procedure• No Gas/Oil Maintenance

Hummer Vibrator• User Friendly - Less Fatigue• Large Heads for Standard Walls• Deep Foundations

Screeds

LB104 4’ Screed BarLB110 10’ Screed BarLB112 12’ Screed BarLB114 14’ Screed Bar

FLX12-3000 12”x.120 Soffcut BladeFLX14-3000 14”x.120 Soffcut BladeXL10-2000 10”x1/8” Green BladeXL10-3000W 10” Red Blade-14” Skid PlateXL10-5000 10”x1/8” Yellow BladeXL12-2000 12”x1/8” Green BladeXL14-2000 14”x1/8” Green BladeXL14-3XX3 13-1/2”x1/8” White BladeXL14-3000 14”x1/8” Red BladeXL55-3000A 5-1/2”x.095 Red BladeXL5-R250 5/8” Radius Blade-X-50XL5-R500 3/4” Radius Blade X-50XL6-2000 X-150 6” Green Prowler BladeXL6-3000 X-150 6” Red Prowler BladeXL8-2000 8”x1/8” Green Blade

Pro 1.5+ 13 Amp Power Unit70M3• High strength cast

aluminum housing• Rugged shock absorbing

frame

70D1 1”x12” Vibrator Head70F15 1-1/2”x14” Vibrator Head70G17 1-3/4”x14” Vibrator Head70J2 2”x14” Vibrator Head70B7 7ft. Shaft for Vibrator70B10 10ft. Shaft for Vibrator70A21 21ft. Shaft for Vibrator

Concrete Vibrators - Heads & Shafts

K760 14” Power Cutter966433401• 5HP air cooled 2 cycle

motor• 14” blade capacity• 5” cutting depthBlade: in (mm) 12/14 (305 / 350) Cutting depth: in (mm) 4/5 (100 / 127) Power: hp (kW) 5 (3.7) Displacement: cu in (cc) 4.5 (74) Weight: without fuel and cutting equipment, lbs (kg) 20.7/21.6 (9.4 / 9.8)

• Construced from heavy-gauge, cold-rolled steel

• Spiral-wound wire guard meets OSHA requirements

• Rubber wheels and handle for portability

PB36D 36” Fan Direct Drive 2 SPDPB42D 42” Fan Direct Drive 1 SPD

Ventilation Fans

CDB36-D

K3000 14” Electric Power Cutter (Wet Cut)968378401• Suitable for general concrete cutting, masonry or

landscape work• 14” blade capacity

Cut-N-Break Concrete Saw968339102• 5HP, 74cc motor• Depth of cut per pas 2/5”• 9” twin blades

K3000 14” Electric Power Cutter 96837604(Dry Cut)• Vacuum Attachment (Removable) for clean, dry

cutting

For Sale or Rent!


EQUIPMENT

EU1000IAN

EB Series - Industrial Generators• Commercial grade Honda Engines• 120/240V selection switch for total generator output in 120V• Full frame protection; Full GFCI protection on all outlets• Intelligent Auto Voltage Regulation (iAVR); OSHA compliant• Wheel, handle 7 hanger kit standard

For Sale or Rent! wwwjobsitesupply.com

Model Engine Wattage Max AC Output

Rated AC Output

iAVR Output

Noise Level

Fuel Ca-pacity

Run Time @ 50% Load

Dry Weight

EB4000 iGx270 OHV with Oil Alert™

4,000 120/240V 4,000W 33.3/16.7A

3,500 29.2/14.6A

5,000W for 10 sec.

71dB 6.2 gal. 16 hours 185 lbs.

EB5000 iGx390 OHV with Oil Alert™

5,000 120/240V 5,000W 41.7/20.8A

4,500W 37.5/18.8A

7,000W for 10 sec.

72dB 6.2 gal. 11.2 hours 214 lbs.

EU Series Super Quiet Generators• Inverter technology makes these generators extremely lightweight,

portable & fuel efficient• Create “clean” or stable power - ideal for sensitive electronic

equipment• Totally enclosed body, making them incredibly quiet• 8-20 hours of run time per tank, depending on model

Model Engine Wattage Max AC Output

Rated AC Output

Max DC Output

Noise Level @ Rated Load

Fuel Ca-pacity

Run Time @ 25% Load

Dry Weight

EU1000IAN GXH50 Honda OHV

1,000 120V 1,000W 8.3A

900W 7.5A 12V 96W 8.0A

59dB 0.6 gal. 8.3 hours 29lbs.

EU2000IAN1 GX100 Honda OHC

2,000 120V 2,000W 16.7A

1,600W 13.3 A

N/A 59dB 1.1 gal. 9.6 hours 46.3lbs.

EU3000IHAN GX160 Hond OHV

3,000 120V 3,000W 25A

2,600 W 21.7A

12V 100W 8.3A

65dB 1.56 gal. 7.7 hours 78lbs.

EU3000ISAN GX200 Honda OHV

3,000 120V 3,000W 25.0A

2,800W 23.3 A

12V 144W 12A

58dB 3.4 gal. 20 hours 134lbs.

EU6500ISAN GX390 Honda OHV

6,500 120/240V 6,500W 54.1/27.1A

5,500W 45.8/22.9A

N/A 60dB 4.5gal. 14 hours 253lbs.

EU2000IAN1

EB4000

EB5000

EU3000ISANEU3000IHAN Handi

EU6500ISAN

HF15 • Covers 1500 sq. ft./hr

at 1/8” thickness• Variable speed 0-2

gpm• No seals or packings• No power surge

start-up• Remote start/stop• Auto Reversing Technology• Tool tray

Spray Buddy

Power Buggies

Vibrators

Screeds

Allen Engine Driven ScreedWith engine options ranging from 5.5HP to 11HP, there’s a steel screed for every floor finishing operation.

Allen 12 HED Steel ScreedWith rotating engine shaft vibrator & manual winches.

Allen Flex Shaft VibratorAvailable in electric or gasoline powered backpack models.

AR16• 16 cu. ft. bucket• Variable speed hydrostatic pump• (2) Individual hydraulic wheel motors with a 18.7 qt.

hydraulic reservoir

AR21• 21 cu. ft. bucket• Variable speed hydrostatic pump• (2) individual hydraulic wheel motors with a 18.7 qt.

hydraulic reservoir

Hy-Flex Slinger• DC motor for

variable speeds• 30 degree upward

application to apply mortar to the under-neath surfaces

• 360 degree application

• Heavy duty electric winch with a 700 lb capacity

• Depths up to 35 ft.

Heavy Duty Orange#00007 - 4” DiameterHOL: serves with M1 Core RtgGives excellent footage & drilling speed. Designed for all types of wet drilling in applications with light to moderate steel. Wet cut core bit.Stocking 2-1/2” to 6” up to 14” available.

Heavy Duty OrangeDry Hole Saw - 2”#00011DH: Block & Soft Brick(not for use on concrete)Very high quality diamond & longer coring life

07385 7” x 5/8 - 11 Cont Rim Diamond Cup Wheel07442 7” x 5/8 - 11 Single Row Diamond Cup Wheel07429 4” x 5/8” - 11 Standard Double Row Cup Grinder07434 7” x 5/8” - 11 Standard Double Row Cup Grinder07450 7” x 5/8” - 11 Standard Single Row Cup Grinder27542 4” “V” Crack Blade 5/8” - 11 Arbor

Hoses & Accessories

DP300-50MF 3” Blue/PVC Discharge Hose & EndsDPG200-50MF 2”x50’ Discharge Hose/Screw

Designed for open end water discharge service.Construction: Homogeneous PVC tube & cover, reinforced with 3-ply polyester yarn.Temp range: 5-130 FBulk Coils: 300 ft.Available in sizes up to 16” I.D.

PVC Discharge Hose

White Cloth Discharge HoseGeneral pupose lay-flat water discharge hose. Construction: Black SBR rubber tube with white wo-ven cover 100% polyester cover.Bulk Lengths: 50 & 100 ft. through 3”

DM200-50MF 2x50 White Cloth Discharge Hose

Standard duty PVC suction has has a smooth bore allowing full flow.Construction: All PVC w/ an encapsulated rigid PVC helix for crush reistance & flexibilty.Temp Range: 0-150 F

PVC Suction Hose

SP300MF 3’ Green PVC Suction HoseSP200 2x20” Green Suction Hose

Accessories

QCA200 Male 2” ZC End w/ Female ThreadMF200-F 2” Female Thread Suctin CoupQCF200 Male 2” QC End w/ Male ThreadQCE200 Male 2” QC End w/ ShankQCA300 Male 3” QC End w/ Female ThreadQCE300 Male 3” QC End w/ ShankQCB200 Female 2” QC End w/ Male ThreadQCD200 Female 2” QC End w/ Female ThreadQCF300 Male 3” QC End w/ Male ThreadQCC200 Female 2” QC End w/ ShankMF300-F 3” Female Thread Suction CouplQCC300 Female 3” QC End w/ ShankQCB300 Female 3” QC End w/ Male ThreadQCD300 Female 3” QC End w/ Female Thread

EQUIPMENT


2” Trash Pump

CWHO75-50MF 3/4 x 50 Rubber Water HoseCWHO75-100MF 3/4 x 100 Rubber Water Hose

M1 Complete Anchor Rigwith 20amp Core Bore Motor#4245055• 6” wheels for easy mobility• Dual switch/outlet control panel with amp meter• Vacuum pump for quick mounting to flat surface

without drilling an anchor hole• Anchor slot base

KTH50X• 2”NPT Inlet &

Outlet• 5.5HP GX 160

Honda Engine• 185 GPM - 26’

Maximum Lift

Semi-Trash Pump

STH50X• 2”NPT Inlet &

Outlet• 4.0HP GX 120

Honda Engine• 150 GPM - 26’

Maximum Lift

Trash Water Pumps

WT20X2 inch, 163cc 187 gal per minute Trash Water Pump

WB20X 2 inch, 118cc 152 gal per minute Centrifugal, Self-priming Water Pump

#00031 3” Dry Hole Saw#00014 3-1/2” Dry Hole Saw

*Call for availibility

8 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225

EQUIPMENT

Oil-injected Vibratory RammersBS 70 2I

Shoe Size:• 11” x 13” or 13” x 13”Operating Weight:• 164 lbPercussion Weight:• up to 700 blows/min

Electric External VibratorAR36/6/042

• Standard centrifugal force 391.2 lb.• Variable vibrations up to 6000 rpm• Operator-friendly clamping system

Walk Behind TrowelCT48-8A

Trowel Diameter• 48”Speed Range:• 60-125 rpmHorse Power• 8mph

Vibratory Plate6555 H

Operating Weight:• 1049.4 lbsBase Plate (W & L):• 21.7” x 35.4”Centrifugal Force:• 14,612.6 lb

Internal Vibrator with InverterIRFU 57

Head Diameter • 2.3 inHose Length • 16.4 ftCompaction Diameter • 33.5 in

Ride on TrowelCRT48-35V

Speed range: 25-165 rpmMax rated power: 35 hp @ 3800 rpm

Plate Compactor with Wacker EngineWP 1550Lightweight, high strength aluminum components including the engine console and beltguard have been combined for reduced weight and easy machine handling.

Straight, center-mount-ed guide handle offers superior maneuverabil-ity and can be lowered within inches of the surface to operate plate under obstacles and form work.

Centrifugal Trash PumpPT 2A

Submersible Pump 220V/60HzPS2-500

Discharge Diameter • 2 inOperating Weight • 21 lbMax Head • 39.5 ftMax Discharge • 62.4 gal/minPower • 2/3 hp

Suction & Discharge Diameter • 2 inOperating Weight • 96 lbMax Discharge • 210 gpm

Mobile Generators

Light Towers

For Sale orRental!

EQUIPMENT

Cold Water Pressure Washer

WP-3004-4MHB300PSI Cold Water Pressure WasherExternal bypass system allows more water into the system to protect from heat build-up.


Pervious Concrete Tools

Pervious Concrete • Placing • Jointing • Curing

BUNYANTHE WORLDS MOST EFFICIENT SCREED SYSTEM

Mortar Mixers

WM70P7 Cubic Ft Poly Drum

• Capacity: 1-1/2 to 2-1/2 bags

• 8HP Honda engine• Manual dump action

WM120SHH12 Cu. Ft. Steel Drum with Coupler

• Capacity: 3-1/2 to 4 bags• 11HP Honda engine• Cast iron paddle arms

For Sale orRental!

Test Plugs & Testing Equipment

First Aid

Fire Extinguishers

10lb Proline™ ABC Fire Extinguisher466204K• 10lb ABC Extinguisher

with Wall Hook• UL Rating - 4A:60B:C• 70/Skid

Traffic Cones

DW Series Wide Body Traffic Safety Cone 18” Orange w/Black C - 10lb Base3004023

SAFETY IDEAS AT WORK

3007773• 24” Stop/Slow Paddle• EG Reflective Plastic w/

21” Plastic Handle • 61” Handle Adapter

3013308• +2.5 Diopter Clear Lens

with Black Frame

Signs @ JOBSITE SUPPLY

Lighting

3/8”x6’ Adjustable Locking Cable

8413XDPF• Patented locking mechanism

holds the cable tight at any position

• Convenient, rekeyable cylinder• #5KA Master Lock keyed alike • Fits most portable boxes

including Greenlee, Knaack & Delta. All key codes available.


46622701K 2 1/2lb Fire Extinguisher-UL Rating 1A:10B:C-144/Skid

46611201K 5lb Fire Extinguisher-UL Rating 3A:40B:C-112/Skid

466206K 20lb Fire Extinguisher-UL Rating 10A:80B:C-50/Skid

Hydration Solutions

WL175MH 175 Watts, 120 Voltage, 15, 000 Lumens - Portable Light

WL400MH 400 Watts, 120 Voltage, 40, 000 Lumens

WL85S JR 85 Watt Flourescent Wobble Light JR

3004023 18” Traffic Cone Black Base3004057 28” Traffic Cone - 7lb. Black Base3004176 28” Traffic Cone - 10lb. Black Base

Hydration Solutions & Accessories

Jobsite Supply 5 or 10 Gallon Industrial Blue Cooler

28” Lime Traffic Cone2212152

1610IS JS 10 Gal Cooler1685IS JS 5 Gal Cooler8257UN Cup Holders/4-6.5oz Cups2B4112 Paper Cups - 6.5oz164002 Mounting Brackets

FK200906 10PW Blood Pathogen Safety KitK202012 10PW GP JSI First Aid KitK202015 16PW GP JSI First Aid KitK206212 50 Man First Aid Cabinet-FAC-3K250-506 Eyewash Station 32oz BottleK401025 25 per LPEK JSI First Aid KitK401050 10PW LPEK JSI First Aid KitK401060 50 per LPek JSI First Aid Kit229-060 Eyewash Bottle 40oz250-525 Eyewash 16oz Bottle Sterile

Stocking a complete line of competetively priced First Aid Kits

that meet or exceed the ANSI Z-308.1 standard.

20 Ounce Bottles• Orignal Lemon Lime 32868• Riptide Rush 32488• Glacier Freeze Frost 32486• Orange 32867

2-1/2 GallonPowder Mixes

• Fruit Punch 33691• Orange 03970• Original Lemon Lime 03969• Glacier Freeze Frost 33677• Riptide Rush Frost 33673

Flavors

Flavors

Stop & Slow Paddles

Nemesis Glasses

3000355 Black Frame - Clear Lens3000356 Black Frame - Smoke Lens3020706 Camo Frame - Clear Lens3010707 Came Frame - Smoke Lens

10” x 14” Plastic

CONSTRUCTIONAREA

HARD HATAREA

CONSTRUCTIONAREA KEEP OUT

MEN WORKING DO NOT ENTER

DO NOT ENTER THIS AREA

OTHERS AVAILABLE!

No Set-Up - Just Plug It In• Metal Halide• Bright, Durable & Virtually Indestructible• 36” Tall• Self-Righting• Internal Ventilation System• Shock Protected Bulb


DW Series Wide Body Traffic Safety Cone 18” Orange w/Black c 3004023

Zinc plated stamped steelMeets or exceeds OSHA 1926AF77710

Double-leg with snap hook and flat steel rebar hooks at leg ends x 6 ft. (1.8m)1340161

3,600 lb Gated Hooks Meeting ANSI Z3591341001

5000 lb Anchorage PointAJ450A

5000 lb Fall Arrest2190053

DBI Sala 3590500 Rebel™ 33’ (10m) Self Retracting Lifeline3590500

DBI/Sala Glyder2™ Sliding Beam Anchorage System2104700

ZorbitT Energy Absorber for Horizontal Lifeline Systems7401013

Anchorage - Anchorage means a secure point of attachment (structure) for the fall arrest system.

Body Support - Full body harnesses a connection pointon the worker for the personal fall arrest system.

Connections - Connectors are devices used to connect the worker’s full body harness to the anchorage system. (eg. shock absorbing lanyard, self retracting lifeline, etc.)

Descent/Rescue - Rescue & retrieval of a fallen worker is a required compo-nent of any Fall Protection Program.


Pro™ Line Positioning Harness

6’ Lanyard w/ Shock Absorber Hook

6’ Rope Shock Absorbing Lanyard

3’ Webstrap Anchor Sling

Self Retracting Life Lines

Reusable Concrete Anchors

The Basics of Every Personal Fall Arrest System Can be Described as the ABC’s

of Fall Arrest. Fall Protection

Beamers

Temporary Horizontal System

Rebar Chain Assembly 2” Hook

Beam Anchors

DBI/Sala Glyder 2™Sliding Beam Anchorage System2104700

Visit www.jobsitesupply.com for fall protection training schedules.

NEW Nano-Lok™ System

MAINTAIN SAFE FALL DISTANCES FOR IMPROVED WORKER SAFETY Nano-Lok is ergonomically designed for ease- of-use and is ideal for direct connection to most harnesses. At only 1.6 lbs., it’s virtually unnoticeable on your back, stays out of the way and can be easily used as a lanyard replacement.



• Cap Style - 6-Point Nylon Suspension With Ratchet Adjustment

• Meets ANSI Z 89.1 - Type I, Class C, E & G

• Accessory Slots• Accommodates a Wide

Variety Of Eye, Face & Hearing Products

19951 White Omega II MEGA RATCHET® Safety Helmet19952 Yellow Omega II MEGA RATCHET® Safety Helmet19953 Orange Omega II MEGA RATCHET® Safety Helmet19954 Red Omega II MEGA RATCHET® Safety Helmet19956 Blue Omega II MEGA RATCHET® Safety Helmet19957 Gray Omega II MEGA RATCHET® Safety Helmet19958 Green Omega II MEGA RATCHET® Safety Helmet19989 Hi-Viz Pink Americana® MEGA RATCHET® Safety Helmet19945 I85R Replacement Suspension19146 304 Replacement Brow Pad

• 100% polyester mesh. Zip-per front closure.

• 2 exterior waist pockets w/hook & loop closure.

• 2 interior waist pockets. • Conforms to ANSI/ISEA

107 standard. • Medium - 5XL

62136 Medium-Lime ANSI Class 3 Vest - Mesh Hi-Viz 62137 Large-Lime ANSI Class 3 Vest - Mesh Hi-Viz 62138 X-Large-Lime ANSI Class 3 Vest - Mesh Hi-Viz 62139 2X-Large-Lime ANSI Class 3 Vest - Mesh Hi-Viz 62140 3X-Large-Lime ANSI Class 3 Vest - Mesh Hi-Viz 62141 4X-Large-Lime ANSI Class 3 Vest - Mesh Hi-Viz 62142 5X-Large-Lime ANSI Class 3 Vest - Mesh Hi-Viz

• Zipper front closure. • 2 exterior waist pockets and 1 left chest pocket. • AwareLite reflective trim.• Conforms to ANSI/ISEA 107 standard for design,

color and reflectivity. • Medium - 5XL

61647 Medium-Hi-Viz Lime ANSI Class 2 Economy Vest61648 Large-Hi-Viz Lime ANSI Class 2 Economy Vest61649 X-Large-Hi-Viz Lime ANSI Class 2 Economy Vest61650 2X-Large-Hi-Viz Lime ANSI Class 2 Economy Vest61651 3X-Large-Hi-Viz Lime ANSI Class 2 Economy Vest61652 4X-Large-Hi-Viz Lime ANSI Class 2 Economy Vest61653 5X-Large-Hi-Viz Lime ANSI Class 2 Economy Vest

• Woven Cotten. • 12 pockets - 2 interior waist, interior waist pen, 4

divisional right chest, double left chest - 1 open and 4 pen.

• Zipper Closure• Conforms to ANSI/ISEA 107. • Medium - 5XL.

61200 Medium-Lime ANSI Class 2 Surveyor’s Vest 61201 Large-Lime ANSI Class 2 Surveyor’s Vest61202 X-Large-Lime ANSI Class 2 Surveyor’s Vest61203 2X-Large-Lime ANSI Class 2 Surveyor’s Vest61204 3X-Large-Lime ANSI Class 2 Surveyor’s Vest61205 4X-Large-Lime ANSI Class 2 Surveyor’s Vest61206 5X-Large-Lime ANSI Class 2 Surveyor’s Vest

New Hire Kits

16913: Neatly Shrink Wrapped Inside the Helmet - New Hire Kit Includes: • 19321 - White ERB Liberty® Ratchet• 17940 - Clear IProtect® Eyewear (Clear)• 14406 - Work Gloves (Large)• 14388 - Reusable, Corded Ear Plugs

18566 Includes 19321, 17940 (Smoke) 14406, 14388

*Certified when headband is installed in reverse position.

Omega II Mega Ratchet® Safety Helmets

ANSI Class 3 Vest - mesh Hi-Viz Lime

ANSI Class 2 Surveyor’s Vest - Solid Woven - Hi-Viz Lime

ANSI Class 2 Vest - Mesh - Economy - Hi-Viz Lime

• ANSI Class 2 Break-Away. Polyester woven tricot• Fall Protection D-Ring slot on back. • Hook & loop front closure. 6 pockets - 2 exterior

waist, 1 exterior chest, and 2 pen. Mic tabs. • AwareLite reflective trim.• Medium - 5XL

61390 Medium-Hi-Viz Lime Class 2 Vest Tricot Break-Away with D-Ring61391 Large-Hi-Viz Lime Class 2 Vest Tricot Break-Away with D-Ring61392 X-Large-Hi-Viz Lime Class 2 Vest Tricot Break-Away with D-Ring61393 2X-Large-Hi-Viz Lime Class 2 Vest Tricot Break-Away with D-Ring61394 3X-Large-Hi-Viz Lime Class 2 Vest Tricot Break-Away with D-Ring61395 4X-Large-Hi-Viz Lime Class 2 Vest Tricot Break-Away with D-Ring61396 5X-Large-Hi-Viz Lime Class 2 Vest Tricot Break-Away with D-Ring

ANSI Class 2 Vest Tricot Break-Away w/ D-Ring Slot

SEE MORE ERB SAFETY PRODUCTS ON NEXT PAGE...

Eye Protection

17940 (Clear)Lightweight 9.5 base curve with hard coated polycarbonate lens offers 99 percent UV protection. Meets ANSI Z87.1 high impact.

17941 (Smoke)9.5 base curve offers great wrap around protection. Hard coated polycarbonate lens offers 99% UV protection. Meets the requirements of ANSI Z87.1.



Custom Printed Safety Protection

Logos are great for:• Corporate Identity• Work Crew

Segmentation• Ground Breaking

Ceremony• Visitor

Identification

• Choose your product & submit your logo & camera ready artwork to Jobsite Supply for your custom safety gear!

17969 Inhibitor (Clear)Frameless wraparound design fit provides optical protection. 4-position adjustable temple with non-slip rubber tips. Lens offers 99% UV protection. Meets the requirements of ANSI Z87.1.

17970 Inhibitor (Smoke)Frameless wraparound design fit provides optical protection. 4-position adjustable temple with non-slip rubber tips. Lens offers 99% UV protection. Meets the requirements of ANSI Z87.1.

373 JacketANSI Class 3 Rain Jacket. Polyes-ter woven oxford with PU coating. 5.5mm. Snap front and wrist clo-sure. Attached hood. Oversized. No pockets. Conforms to ANSI/ISEA 107 for design, color & reflectivity. M/L - 5X/6X

373 PantsNSI Class E (ensemble) when not worn with other ANSI 107 garment. Polyester woven oxford w/PU coat-ing. 5.5mm. Pocket slits on side. Snap ankle and fly closure. Class 3 when worn with Class 2 or 3 vest. AwareLite reflective trim. MD - 5XL

S376 SweatshirtANSI Class 3 Sweatshirt. 7oz poly-ester. Attached hood with draw-string. Large pass through front pockets. 3M Scotchlite reflective trim. Conforms to ANSI/ISEA 107 for design, color and reflectivity. MD - 5XL

Low 12 Piece Minimum!



• No right/no left - for no-hassle design

• Easy on/easy off - Provided by 800% elongation, and smooth, drag-free inner surface

• Lasts 4x lon-ger - Made out of Natural Latex Rubber, provid-ing enhanced material strength

17851 17” Slush boot, medium 8-1017852 17” Slush boot, large 11-12#17855 17” Slush boot, large-x-large 13-14#17853 17” Slush boot x-large 15-16

Rebar Safety Caps

#3-#8 impalement prevention with steel plate

Flashing LED Paddles deliver a bright warning for protection.• Will operate for over

20 hours continuously on 2 AA rechargeable NiMH batteries

• 18” or 24” sizes are available with any message & grade of reflective sheeting

• Optional carrying bag holds 2 paddles & all accessories including 2 5-foot staffs

• Switch can activate side A, side B or both sides

BlinkerPaddle® Safety Cans

• Galvanized steel Type-1

• Meets OSHA requirement

UI10FS 1 gallon red safety can with funnelUI20FS 2 gallon red safety can with funnelUI50FS 5 gallon red safety can with funnelUI20FSB 2 gallon blue safety can/kerosene w/ funnelUI50FSB 5 gallon blue safety can/kerosene w/ funnelUI50FSY 5 gallon yellow safety can type 1 diesel w/

funnel

LED Road Flares

6 Pack Road Flare Kit1186 An emergency flare that does

not produce a flame, smoke or harmful bi-products and does not require batteries. Recharges so that it is ready for use when needed.• 16 bright LEDs; choice of

red, blue or yellow LEDs• 9 flashing patterns includ-

ing SOS• Powerful magnet to attach

to metal surfaces• Waterproof & submersible

to 33 feet

Metacaulk®

Protective Gloves

G-Tek 3GX ANSI Level 319-D310 L-XL• Poly Coated

Nitrile Glove Gray Dip34-225 M-L-XL

Great White Cut ANSI Level 219D-622 L-XL

G-Tek 3GK ANSI Level 419-D330 L-XL-XXL• Dyneema Fiber Poly Coated

G-Tek Maxiflex Ultimate34-875• Nitrile

G-Tek Maxiflex Endurance34-845• Foam Nitrile Dotted Palm

34-800 G-Tek Maxifoam - M-L-XL95-809 Brown Jersey Glove

66302 Metacaulk - 10oz 1000 Water Based66303 Metacaulk - 30oz 1000 Water Based66382 MC150-10oz GP Intumescent

Fire Stopping Products

Slush Boots

DISC10

Small #3-#9 HI Viz Orange Mushroom Style Safety Cap

CAPMUSH25


Protective Eyewear

Sealant Products3M™ Polyurethane Sealant 540

• Bonds to a variety of materials

• Paintable• Smoke & flame

rated, 90 minute skin time

525 Polyurethane Construction Sealant (NPI)560 Polyurethane Adhesive Sealant strong 1

component, moisture curing product230 Crystal Clear Sealant (Clear)860 Tartan™ Strapping Tape 860 - black

tensilized polypropylene backing with a synthetic rubber resin adhesive.

3M™ Particulate Respirator 8511, N95Added value with bulk orders!

• 3M™ CoolFlow™ Valve

• Adjustable M nose clip• Braided head bands

and soft inner materials

• Spacious and durable• Designed to in-

crease comfort and wearability

Respirators

3M™ Particulate Respirator 8210, N95

Occupational Health & Environmental Safety Protective Clothing

Protective Coverall - 4510

• Elastic waist, ankles, and wrists for convenience and freedom of move-ment.• Two-way zipper with storm flap for convenience and to help provide ad-ditional protection.

• Anti-static coating on both sides helps reduce static build-up and prevent the risk of static discharge during use.

4520 Disposable Paint Suit4530 Blue Coverall4540 Flame Resistant Coverall Paint Suit4565 Disposable Chemical Protective Coverall

3M™ Tartan™ Masking Tape 200Utility purpose paper tape.Natural. Available in 1” x 60yd. & 2” x 60yd.

Cubitron™ II Abrasive Belts have raised the bar for grinding performance & productivity - thanks to 3M precision-shaped ceramic graintechnology.

• Average up to 30” faster cutting on hard to grind metals than the next best competitive belt

• Cuts cooler - diverts heat from the workpiece & belt to the swarf

• Helps eliminate burnishing & heat stress• Available in 3 grades: 36+, 60+ & 80+• 1/2” to 6” available

Cubitron™ II Abrasive Belts

Firestops

CP25WB

15WB 2 Hour Fire Protection Sealant3000 Fire Barrier Water Tight Sealant615 PLUS Fire Barrier Duct WrapFire Dam150

Acrylic Latex Caulk - 10oz & 24oz - Available in Blue, Red & Limestone

• 4-hour protection sealant• High performance fire protection• Through penetration


3M™ Scotch Weld Products

62-4983-8030-2

62-9880-9930-5 Cylinder Adhesive Applicator STD Output *Includes 9501 Spray Tip

62-9880-8148-5 Cylinder Adhesive QSS Spray Tip62-9880-0006-3 Cylinder Adhesive 6’ Hose

Holdfast 70 Cylinder Spray Adhesive Coverage: 2,590SF @ 1 GM/SF

3M™ Fall Protection Roofing Kit20058 Portable, Convenient & Economi-

cal - this versatile fall protection kit is designed to meet most any roofing

application. Includes: • SafeLight universal size harness• 6’ shock absorbing lanyard• 50’ rope lifeline with attached manual rope grab• Reusable roof anchor in 5 gallon bucket with reusable lid• Product complies with OSHA & ANSI standards

Goggles

TEKK Protection Impact Goggles91251

91252-0000 Chemical Splash and Impact Resistant Goggle

8211 3M 8211 N95 Particulate Respirator w/ Cool Flow Exhalation Valve

07192 Dual Cartridge Respirator Assembly Medium07193 Dual Cartridge Respirator Assembly Large

3M™ Continued on Next Page...

1160-A 3M™ Duct Tape - 1.88” x 60 yards8087 3M™ Construction Seaming Tape2090 Scotch-Blue™ Painter’s Tape - Multi-Surface2060 Scotch® Masking Tape for Hard to Stick

Virtua™ V411672-0000 (Clear)• Anit-fog lenses• Extended viewing

range in every direction without distracting sideshields or brow guard

• Soft, universal fit nose bridge

11673-0000 Gray Virtua™ V4 anti-fog eyewear11674-0000 Mirrored Virtua™ V4 anti-fog eyewear

BX™ Readers with 1.5 Diopter11377-0000 (Gray Lens - Silver Frame)• Molded in magnifying

diopters• Sleek, contoured &

fully adjustable• Soft nose bridge

11378-0000 BX™ Readers w/ 2.0 Diopter11379-0000 BX™ Readers w/ 2.5 Diopter

Virtua™ Sport11384-0000 • Athletic look styling• Excellent eye cover-

age• Durable, lightweight

frame design

NEW 3M™ Particulate Respirator 8210V

• Proprietary 3M™ CoolFlow™ Valve helps keeps wearer cool

• Cushioning nose foam• Adjustable noseclip

helps provide a custom fit and secure seal

• Classic disposable N95 particulate respirator

• Welded strap at-tachment

• Cushioning nose foam

• Adjustable noseclip helps provide a custom fit

76733 - 6” x 48” 80 Grit Belt


Ear Plugs

EAR Push-In™ EAR Plug (uncorded)318-1000

318-1001 EAR Push-In™ Ear Plug (corded)312-1224 TFIT 2 Corded Ear PlugP1000 Nitro Ear PlugP2000 Notch Ear Plug

Head Gear

TuffMaster Cap Mounting Headgear 82519-0000Spring #24

TuffMaster Deluxe Headgear82501-0000Ratchet Style

TuffMaster Cap Mounting Headgear82502-0000H18 Tab/Slot

H8A Headgear / WP96 Faceshield Combo82783-0000Includes 82701 shield & 82501 headgear

Face Shields

Steel Mesh Screen82506-0000

82701 3M Easy-Change WP96 9’’ X 14 1/2’’ X .080’’ Clear

82702 3M Easy-Change WP96C 9’’ X 14 1/2’’ X .080’’ Dark Green

SafeClaw Concrete Anchors

• Rated to 5000 lbs.• Requires 3/4” Hole, 3” deep• Easy to remove and reuse

4077 SafeClaw Rated to 10,000 lbs.

Safety Harnesses

Elavation™ Harness, Fall Protection7550

Ameba™ Harness, Fall Protection1413

Apache™ 3 D-Ring Harness with 4” Back Pad, Fall Protection1711

SafeLight Series Safety Harness w/ Side & Back D-Rings & Grommets10951

10950 Safelight Safety Harness

SafeCom Polydac Blended Rope, 50’ 5/8″ w/ 2 Hooks0221-50

0221-100 SafeCom Polydac Blended Rope, 100’ - 5/8″ w/ 2 Hooks

0221-25 SafeCom Polydac Blended Rope, 25’ - 5/8″ w/ 2 Hooks

Hard Hat with Uvicator™ Sensor (Yellow)H-702R-UV

• Uvicator UV Sensor• Comfortable ratchet suspension with height

adjustment• Optional 6-point strap• ANSI/SEA compliant when worn in the forward

& reverse donning positions

H-701R-UV White - Hard Hat w/ Uvicator™ Sensor


The Reload™ Retractable Lifeline Series

Smarter.• A frictionless braking system with no

moving parts that won’t go out of adjustment

• Individual components removed & re-placed in minutes due to modular design

Safer.• Constantly moving 100% reliable locking

Full Contact™ Pawl mechanism that cannot freeze, hang up or corrode

• No wet lubrication to attract dirt &/or debris

Stronger.• Case is manufactured from unique

toughened nylon to resist impact damage & protect internal chassis

• Modular chassis design & case are not integrated allowing the case to serve strictly as the protective armor

REW-7 3/4” Web 7ft 4lbs Double Lock Snap Hook

REW-12 1” Web 12ft 7lbs Double Lock Snap Hook

REW-23 1” Web 23ft 11lbs Double Lock Snap Hook

REC-23 3/16” Steel Cable (7x19)

23ft 12lbs Swivel Double Lock Snap Hook







Retractable Lifelines

Uvicator™ Sensor Shows Hard Hat Status

• Red = New

• Fading to White = Worn

• White = Replace

4075 SC

Lifelines



Lighting & Accessories

• Polycarbonate Lens• IP44 design for dust and water resistance• Rubberized carrying handle and base• Highly polished reflector• Low energy consumption• 10-ft integrated power cord• CSA certified

The Defender LED Floor LightsPortable, lightweight, and durable, the Defender Floor Lights deliver big brightness from a small package. Heavy-duty impact resistant housing keeps them on the job. Compact size goes into tight places and stores easily. Fluorescent and LED units available.

E 709187

E 709165

Hang-a-Light®

The Hang-A-Light® temporary area work light is portable, bright and durable. It can be ceiling mounted and utilizes pulse start technology which meets new guidelines for metal halide energy efficiency. This re-usable task light emits more light and uses less energy than the traditional string lights. Now you can “go green” with durability and performance.• Modifiable for 120/208/240/277 V• Heavy- gauge steel construction• Spring-loaded steel safety hook for fast installation• 20,000-hour lamp life• NEC/OSHA compliant• UL certified - suitable for damp locations, CUL Listed, EISA Compliant

111400PS

The SmithLightThe SmithLight battery operated LED Work Light is a rugged, bright and versatile lighting solution. The rechargeable battery makes this light portable and easy to use in any situation. Ideal for night time utility work and road work, industrial and plant use, general construction or anywhere you need portable lighting.

TM120

• IP65 Rating – Water Proof• Double sided light head tilts down by up to 60°• 2 adjustable heights• Light produces no heat output• Safety flash mode feature• Up to 30 hours of battery life on single side mode• 1030 lumens per side

The Hang-A-Light™The Hang-A-Light 84 watt Fluorescent Magnetic Light is an all-around utility light that is energy efficient and waterproof. Extremely durable and light weight, this light can be moved easily and is cool to the touch. The heavy-duty, earth mag-net on the back makes this light ideal for mounting in industrial workshops, tanks or to anything metal. The attached eye hooks make hanging this light simple.

111084

E712810

Pole Attachment

Scaffold Attachment

Tripod

No Set-Up - Just Plug It In.

Wobblelight – the only patented self-righting work light, provides the most cost-effective and high performing jobsite lighting solution for the construction and industrial markets.

• Metal Halide• Bright, Durable & Virtually

Indestructible• 36” Tall• Self-Righting • Internal Ventilation System• Shock Protected Bulb

WL175MH 175 Watts, 120 Voltage, 15, 000 Lumens - Portable LightWL400MH 400 Watts, 120 Voltage, 40, 000 LumensWL85S JR 85 Watt Fluorescent Wobble Light JR

*Replacement Bulbs In-Stock*

MEASURING & LAYOUT

48” Box Frame Level37448• Removable endcaps for

scribing in corners• Rubber endcaps grip walls

& do not leave marks• Crystal clear vials

readable in any direction

35’ Powerlock® Tape Rule with Blade Armor® Coating33-835

35’ x 1-1/4” Fatmax™ Tape Rule33-735

33-725 Stanley Fatmax™ 1-1/4-inch by 25-foot Tape Rule33-730 Stanley Fatmax™ 1-14-inch by 25-foot Tape Rule34-106 Stanley 3/8” to 100-foot Steel Tape


Tape Measures

24” TECH Level37924• 24-inch TECH level that combines

a Stabila spirit level and a dual display electronic level

• Vial accuracy guaranteed for life; digital displays are located on the top edge and the front face for easier and faster reads

• Permanently calibrated, epoxy locked vials

78” TECH Level37978• Offers both a Stabila spirit level

with patented vial system that are guaranteed accurate for life, and a dual display electronic level

• The two digital displays are located on the top edge and the front face for easier and faster reads

• The frame is 30% stronger than previous electronic levels and all four corners have been retained on the new frame

Laser Kit with TripodLAPR-150• Set includes: LAPR 150 rotating laser, receiver

with clamp, 42” - 72” heavy-duty tripod, Hi/Lo elevation rod, target plate, hard shell carrying case, 2 “D” batteries.

Jobsite Supply is a Certified Full Line

Distributor of Stabila Products*No Minimum Order - No Freight Charges

S03601 Clear Line SaverAT3701 Flourescent Orange93900 White InvertedETBL2D Blue InvertedSO3641 Flourescent Green Inverted03622 Hot Pink Inverted

Inverted Spray Paint

Jobsite Supply Tape Measure JS25FT • Cushioned case• 7/8” wide, yellow coated blade• Reinforced tip• 7ft. standout

Tape Measures

35’ x 1-1/4” Fatmax™ Xtreme Tape Rule with BladeArmor Coating33-900

MEASURING & LAYOUTFlagging

Surveyors Stake Flags

60-ALQC20• 1/2 x 20 ext leg

aluminum tripod with quick clamp

• 5/8-11 THD

Accessories

37445N 8 ounce brass plumb bob37447N 16 ounce brass plumb bob37448N 24 ounce brass plumb bob37449N 32 ounce brass plumb bob14-661 12’ gammon reel with power return


15901-25-21 Blue 21” w/ 2-1/2”x3” flag - 10 BDL15901-79-21 Red 21” w/ 2-1/2”x3” flag - 10 BDL15901-38-20 Green 21” w/ 2-1/2”x3” flag - 10 BDL15901-10-21 White 21” w/ 2-1/2”x3” flag - 10 BDL15901-41-21 Yellow 21” w/ 2-1/2”x3” flag - 10 BDL

15901-45-21 Orange 21” w/ 2-1/2”x3” flag - 10 BDL

65601 White flagging 1-3/16x100yds.-300 ft.65602 Red flourescent flagging 1-3/16x50yds. -150ft.65603 Pink flourescent flagging 1-3/16x50yds.-150ft.65604 Lime Green flagging 1-3/16x50yds.-150ft.65903 Blue flagging 1-3/16x100yds.-300ft.65905 Yellow flagging 1-3/16x100yds.-100ft.

Pennant Flags

14991-79• 10RL Yellow Flags/

Box

2473W100 100ft. Steel Tape - White Epoxy2473W200 200ft. Steel Tape - White Epoxy2473W330 330ft. Steel Tape - White Epoxy

Laser Levels

PLS180 • 180 degree fan angle• Plumb and level line too• Features new, unique

optic technology• Runs on 3 included AA-

batteriesPLS3 Dot Plumb Level Square Laser Tool PLS5 Laser Level Self Leveling 5 Point SystemPLS90 Self-Level Laser

LL100-2• A tripod &

grade rod is included with the la-ser & HR320 receiver in one hardshelled, portable system carrying case.

GL422 &GL412• A tripod &

grade rod is included with the laser & HR320 re-ceiver in one hardshelled, portable system carrying case.

Spectra Precision® LaserLL300• The automatic, self-leveling Spectra

Precision Laser LL300 from Trim-ble is the most rugged laser level available, tough enough to handle a wide variety of gen-eral and concrete construction applications.

Laserometer ReceiverHL700• 3yr warranty• Digital readout 2”

above & 2” below on-grade reading

• “Anti-strobe filter

CR600• High, low or on-grade

vtt1,500 ft. radius• Super bright LED

display• 5 on-grade sensi-

tivities to customize for application needs

GR151• 5 section grade rod• 10ths

• 15 feet• Aluminum

GR152• 5 section grade rod• Inches• 15 feet • Aluminum

LL500• One-person leveling

system designed for the most rugged en-vironment. Accurate, stable & reliable.

LL400• Durable, highly accurate

Laser Level • Full automatic, self-

leveling• One button operation

Tripods

Stainless Steel Tapes

Available

See Page 42 for more Measuring & Layout Supplies.

RENTALAdjustable Kicker

Copperhead Laser Screed

Compaction Equipment

Cut-Off Saws

Curb Forms

Decorative Stamp Tools

Grinders

Light Towers

Mutivibe Screed

Power Buggies

Power Tools

Pumps/Water/Grout

Rebar Cutter

Husqvarna Saws

Trowel Machines (Walk Behind & Riding)

Vibrators


SUPER SLAB PACKAGE CUSTOMER:

JOB:

MATERIAL CHECK LIST

Pre-Bid / Take Off Drawings Spec Book General Pricing Gas Powered Tool / Compaction / Adjustable Kicker Vapor Barrier 10 mil / 15 mil Reinforced Rebar Support / Mesh Supports / High Chair / Plastic Chairs Wire Mesh / Expansion Joints Diamond Dowels Perimeter Insulation / DOW / EPS Copperhead / MultiVibe Power Trowels (Riding Trowels) Soff-Cut Saws / Joint Prep Vacuums Curing Compound / FGS-Polishing Dry Shake Hardeners / Grouts / Patches Control Joint Material / Floor Drain “Zurn” Building Maintenance Manager (Owner) - FGS Conditioner

SUPER SLAB PACKAGE CUSTOMER:

JOB:

MATERIAL CHECK LIST

Pre-Bid / Take Off Drawings Spec Book General Pricing Gas Powered Tool / Compaction / Adjustable Kicker Vapor Barrier 10 mil / 15 mil Reinforced Rebar Support / Mesh Supports / High Chair / Plastic Chairs Wire Mesh / Expansion Joints Diamond Dowels Perimeter Insulation / DOW / EPS Copperhead / MultiVibe Power Trowels (Riding Trowels) Soff-Cut Saws / Joint Prep Vacuums Curing Compound / FGS-Polishing Dry Shake Hardeners / Grouts / Patches Control Joint Material / Floor Drain “Zurn” Building Maintenance Manager (Owner) - FGS Conditioner

SALESConcrete Chemicals

Concrete Tools & Accessories

Colored Concrete

Curb Forms

Construction Equipment

Diamond Blades

Mechanical/Electrical Tools

Fasteners

Foam Insulation

Site Tools

Masonry Tools

Power Equipment

Precast/Tiltup

Safety Products

Trench Drain

Waterproofing

Repair Department

Tool Repair• Air/Pneumatic• Gas Equipment• Electric Tools

Large Parts Inventory

MultiQuip Authorized National Service Center


SERVICE

Concrete Calculators

4225• Material cost &

quantity estimations• Concrete areas &

volumes• Includes: User’s guide,

protective case & long life battery

4019• Works directly in Yards,

Feet, Inches, Fractions and Meters – includ-ing Square and Cubic formats

• Quickly and accu-rately find material requirements

• Unit functions estimate material costs instantly

Material Estimator

MEASURING & LAYOUT

66401 (Red)• Ideal for lumber, concrete,

ceramics, and metal • Waterproof - Non-Toxic

Lumber Crayons & Markers

66402 Blue Lumber Crayon

66403 Green Lumber Crayon66404 Black Lumber Crayon66405 White Lumber Crayon66406 Yellow Lumber CrayonPS100 Crayon Holder


SF4100• 4’x100’ Orange

Safety Fence• 30lbs.• Made of durable

polyethylene• Flexible & reusable

15001SM Black - #25 Model

15002-SM Red - #25 Model

Sharpie markers are fade & water resistant. Permanent on most surfaces. Quick drying ink. AP certified non-toxic formula.

Paint Markers

96820 White Paint Marker 48/CAS96821 Yellow Paint Marker 48/CAS96822 Red Paint Marker96823 Black Paint Marker96827 Gold Paint Marker

• New and improved specially formulated paint for industrial

applications• Faster drying paint reduces

smears and removes marks while allowing almost

immediate handling of marked items

AT3701 Flourescent Orange93900 White InvertedETBL2D Blue InvertedSO3641 Flourescent Green Inverted03622 Hot Pink Inverted

Spray Paint

36LATH 36” pine lath stakes48LATH 48” pine lath stakes

Pine Lath Stakes in 36” & 48”

Layout NecessitiesStrait-Line®

Marking Chalk65105

Strait-Line®

Caution Tape662311000ft x 3”

Speed LineLumber Crayon66406Yellow - 12 pieces

Safety Fence

JS25 25ft TapePG1816 6ft Tape MeasurePG1825 25ft Tape MeasurePG1830RG 30ft Tape MeasureTM200 Tally Counter

MP301Keson 36” Steel Single Wheel w/ Folding Handle

MP401EElectronic Counter & 4’ Wheel

Chalk Box - Tape Measures

G10015oz Giant Chalk Box

G3X100Giant Chalk Box3x1 Fast Retrieve

DECORATIVE CONCRETE


Stamp Overlay, Spray Texture & Sealer Colors

SureStamp - Decorative Concrete Stamp OverlaySureStamp is a single component, (just add water) stam-pable cementitious coating, designed for the beautifying of both interior & exterior concrete surfaces.

SureSpray - Decorative Concrete Thin OverlaySureSpray is a single component, troweable or sprayable, cementitious coating for texturing both interior & exterior concrete surfaces. Each design contributes to a non skid cementitious surface.

Micro Topping - Decorative Concrete Micro ToppingSureCrete’s MicroTopping is an extremely versatile & durable cementitious topping for both interior & exterior concrete surfaces. It’s designed for horizontal surfaces, but may be used on vertical surfaces to create a faux Venetian plaster look.

Micro Spray - Decorative Concrete Sprayable Micro ToppingMicro Spray is an extremely versatile & durable single component, cementi-tious coating for both interior & exterior concrete surfaces. It can bring a new consistent & predictable surface to begin staining.

Xtreme Series PreCast MixXtreme Series PreCast Mix is a hybrid GFRC, dual component, pourable con-crete bag mix. An excellent choice for concrete countertops, fireplaces, wall panels & other designs. The high early strength & 6-12 hour cure time allows to fast production & turnaround.

Xtreme Series GFRC Face MixXtreme Series GFRC Face Mix is a hybrid GFRC, dual component bag mix. It is ideal for precast concrete applications that require longer, thin-ner, more flexible & lighter pieces that are not easily accomplished through traditional poured concrete applications. It is sprayed at 1/16” - 1/8” thich & is used in combi-nation with teh Xtreme Series Backer Mix at 1/4” - 1/2” thick. No polymers & no acrylics.

Xtreme Series Backer MixXtreme Series Backer Mix is a high fiber, hybrid GFRC, dual component pre-blended bag mix. This high early strength, intense load of Glass AR fiber adds immediate structuralintegrity to any precast concrete such as Xtreme PreCast, Xtreme GFRC Face. Use of Xtreme Backer Mix is ideal for ap-plications that require longer, thinner, and reduction of weight.

SureSeal Pigmented SealerA 30% solids solvent based acrylic sealer for vrtical or horizontal cementitious surfaces. This product contains a hybrid, self cross linking, acrylic resin with built-in water repellence & tenacious penetration & adhesion. 30 standard colors available. Also available in 5 gallon pail or 55 gallon drum.

CTF-32-CS Capstone Countertop FormCTF-32-OG OG Countertop FormCTF-32-RG Regular Countertop Form

Project using SureSpray - Decorative Concrete Thin Overlay

Projects using SureStamp - Decorative Concrete Stamp Overlay

DECORATIVE CONCRETE


Liquid Integral Color

SOLOMONCOLORS, INC.

This chart is only a guideline. It is strongy recommended that a test slab be poured & approved prior to the start of a job.

Antique Release Agents & Hardners

This chart is only a guideline. It is strongy recommended that a test slab be poured & approved prior to the start of a job.

• Non-fading• Denser, more durable

surface• Improves abrasion

resistance• Can be antiqued and

stained

• Richly pigmented colors• UV-resistant• Use to antique & marbelize• Suitable for all cementitious surfaces

All ColorsIn-Stock

Visit us onfor instructional videos & demos!

jobsitesupply.com

DECORATIVE CONCRETE


For use in new curb ramps or new construction.Pressed into place in freshly poured concrete Cast-In-Place Tiles have a 1/4” nominal thickness and feature embedment ribs 3” on center through entire length of tile. Plastic sheeting protection covers entire surface of Cast-In-Place Tile.

Surface Applied Truncated Dome Detectable Waring

Systems

ADA Solutions 2’x4’ Cast in Place Panel Detectable Warning Systems

ADA Solutions, Inc. has been the leading supplier of detectable warning surfaces for nearly 15 years.

1STP40 Steg Step Liner 4’ Regular17STP40 Step Liner 4’ Sandstone 28’ BX2STP40 Steg Step Liner 4’ Intermediate9STP40 Steg Step Liner 4” Capstone

• Foam forms that attach to the tile on gunite pools and secured with double face tape and tie wires.• Set up time is minimal (usually the morning of the pour) and they may beremoved early while the concrete is still wet enough to “slick finish” with afoam profile edging tool.• The tie wires are positioned approximately 14” apart with 2” break back.

Poured in Place “Cantilever Forms”

D26 10’ Gray Deck DrainD2T 10’ Tan Deck Drain

Deck Drains

Double wall bonded P.V.C. drain system which remains straighter while concrete is being poured. The .100 thousandths thick top cap is half-lapped and runs continuously across fittings and short sections of base to keep straight lines.The snug fit top cap can easily be removed at cleaning time or be replaced when damaged due to ultraviolet sun rays.

Deck Joint

Provides the necessary crack control, but not sodeep as to interfere with steel placement. In addition to control, it adds a beautifulfinished look.It is cost effectively, durable, and easy to install.With the “T” member ears embedded in concrete, surface water seepage is kept from subsoil.

CS1225 Cs Unitec Wet/Dry Vacuum CleanerEHR20S EHR 20 S Mixer (R)MG 140 5” High Viscosity Mixing Paddle25 GP-WD Portable Mixing Stand Works w/ 5gal BucketEBS 125D Concrete Grinder w/ Dust Extraction253.115 5” Diamond Wheel for EBS 125DBF5-EBS Walk Behind Cart for EBS 125DMG235 9-1/4” Mortar PaddleMH220 9-1/4” Mix & Fold Paddle4CB052GF Core Bit 2” DIA x 12” Depth (R)4CB078UF Core Bit 3” DIA x 12” Depth (R)4CBB102UF Core Bit 4” DIA x 12” Depth4CB152UF Core Bit 6” DIA x 16” Depth4CB204UF Core Bit 8” DIA x 16” Depth

Portable Mixing Stations, Paddles & Accessories

Variable-speed • High-torque • Powerful • Fast

Electric and Pneumatic Portable Hand-held Mixers and Mixing

Stations

LThe ORIGINAConcrete Color

Maintenance System

Original Solid Color Stains Translucent Enhancers

Caramel ORIGINAL Solid Color Stain with Cowboy Dust Translucent color Enhancer

Sierra Caramel Cowboy Dust

Beach House Moonrock Light Gray

PHOTO CREDIT: Staintec

Buffalo Brown Medium Gray

Before After

Moonrock ORIGINAL Color Stain

All colors shown are approximate and, as close as possible, represent concrete with a flat-troweled finish. Jobsite Supply & NewLook International, Inc.™ cannot control (and are not responsible for) application methods, jobsite conditions, finishing techniques, cannot guarantee the final appearance, adhesion or an exact color match. Texturing or finishing techniques, such as brooming or troweling, the use of sealers and slight color drifts in raw materials can produce variations in color. Jobsite Supply and NewLook International, Inc.™ strongly recommend representative jobsite samples (mock-ups) prior to project installation.

Concrete Solid Color Stains & Translucent Color Enhancer

DECORATIVE CONCRETE


Malay Tan StainBuckskin Suede Tone with Carmel Marbling

Cola StainReddish Brown Resem-bling Old Leather

English Red StainTerra Cotta with Rust and Soft Brown Hues

Black StainTortoise Shell Black with Brown Marbling

Aqua Blue StainSoft Blue Patina with Undertones of Green

Golden Wheat Stain Amber hued undertones

Green Lawn StainSoft Grey Green Re-sembling Aged Italian Marble

Vintage Umber Stain Rich Earthy Brown

Acid Stains

SOY • Gel™ S616Removes:• Epoxies, Acrylics,

Urethanes• 100% Biodegradable• Non-Caustic &

Non-Hazardous• Virtually No Odor• Made with 100%

American Grown Soybeans

BEAN•e•doo®M156Removes:• Asbestos Mastic• Carpet & Tile

Mastics• Made with 100%

American Grown Soybeans

Cleaning Solutions

EmergeE1GRemoves: to clean hard surfaces, parts and tools, or as a parts washer solution. Removes dirt and grime easily.

Remove asbestos mastic

Remove carpet & tile mastic

DECORATIVE CONCRETE

DECORATIVE IDEAS AT WORK

STAMP RENTAL

IN STOCK

SEE jobsitesupply.com

FOR STAMPINGACCESSORIES

& TOOLS


15 Gallon Mixing Barrel46250

Mixing Paddle47405

Spike Shoes46106

Magic Trowel47415

Decorative Overlay Gauge Rake w/ Adjustable Cams57001

Microtopping/Overlayment Squeegee78126

Decorative Stamps

Roman Slate

Italian Stone

Old Granite

Texture Skins

Bill Banger

Texture Strip

S-Curve Tool

DECORATIVE CONCRETE

Lithochrome® Color Hardener

FOR PROFESSIONAL USE ONLY

C o l o r S e l e c t i o n C h a r t A – 1 3 2 . 0 2

www.scofield.com

LITHOCHROME® Color Hardener,LITHOCHROME® Antiquing Release & SCOFIELD® Texturetop®

COVERAGE RATE FOR COLOR HARDENER: Coverage rates vary with intended use and application. LITHOCHROME Color Hardener should be applied at a rate of 60 lb (1 bag) per 100 ft2 (3.0 kg/m2), except where indicated by an asterisk(*). *Denotes colors requiring a higher coverage rate, where Scofield recommends 90–120 lb per 100 ft2 (4.5–6.0 kg/m2). See reverse for more information.+$$ = Check current market price.Colors are approximate and best viewed in daylight. Colors shown represent the use of LITHOCHROME Color Hardener with a flat-troweled finish which has been cured with color-matched LITHOCHROMEColorwax or COLORCURE Concrete Sealer.

L. M. Scofield Company 1 800 800 9900

A-24 Russet*

A-21 Deep Charcoal*

A-59 Beige Cream*

0568 Blush Beige* *

4948 Smoke Beige**

A-33 Classic Gray*

A-57 Platinum Gray*

A-25 La Crescenta Brown*

0266 Ash White*

1139 Burberry Beige*

4471 Saddle Brown*A-55 Pecan Tan*

A-28 Tile Red *

A-27 Dark Red *

A-51 Steadman Buff*

1138-S Blue Smoke+$$

A-26 Brick Red*

3611 Oyster White*

A-50 Slate Gray*

A-53 Arizona Tan* �

5183 Stone Gray*

A-29 Terra Cotta* 5921 Walnut 5758 Weathered Sage*

PRODUCT DESCRIPTIONS:

LITHOCHROME® ColorHardener is a dry-shakecolored hardener formulatedto be easily incorporated intothe surface of freshly placedconcrete.

LITHOCHROME® AntiquingRelease is a powdered,colored bond breaker usedwhen imprinting with mat-typetexturing skins or stampingtools.

SCOFIELD® Texturetop® is atrowelable cementitioustopping for resurfacing andtexturing nonmoving, interioror exterior concrete floors orhardscapes.

LITHOCHROME® ColorwaxTM &COLORCURE® Concrete Sealerare available in matchingcolors.

Additional colors available:A-11 Concrete Gray, 6016

White, 0510 Black.

Review Tech-Data Bulletinsand MSDS before use.Visit www.scofield.com for themost current versions.

• BETTER COVERAGE RATES RESULT IN REDUCED INSTALLATION COSTSBy using properly graded aggregates in our colorhardener we are able to extend our surface coverage rates. Most manufacturers recommend using 60 pounds per every 100 square feet. Our color hardener recommendation is for 50 pounds per every 100 square feet. For this reason we have gone to 50-pound packaging for convenience and to help reduce the freight costs of transporting material. The reduced weight per package also helps to reduce the likelihood of employee injuries on site.

Typical aggregate size

distribution

Gap-graded or “well graded” aggregates

reduce voids & increase strength

LITHOCHROME Color Hardener is manufactured withwell-graded aggregates resulting in better suspension atthe surface of the concrete in its plastic state, allowingfor complete coverage using less material.

Based on 2”x2” cube compressive test, Lithochrome Color Hardener provided superior compressive strength after 31 days over competing color hardener products.

PRODUCT DESCRIPTIONS:

CHROMIX® Admixtures For Color-Conditioned®

Concrete

Add strength and beauty to both vertical and horizontal construction projects withCHROMIX Admixtures. The reliable, nonfading and consistent coloring admixturesfor cast-in-place and precast concrete have been proven tostand the test of time.

Available in three convenientforms:� CHROMIX P (powdered)� CHROMIX ML (mixed liquid)

in buckets and totes� CHROMIX L (liquid) available

through selected ready-mix suppliers

The most popular colors areshown on this color chart. Morethan 400 color formulations arereadily available, in addition toour custom matching service.

Beauty, Durability and ValueCHROMIX Admixtures providestreak-free color-conditioning and performance characteristicssuperior to concrete colored with raw pigments.

LITHOCHROME® Colorwax™ and COLORCURE® Concrete Sealerare available in matching colors.

SCOFIELD® Texturetop® is alsoavailable in colors to approximatethose shown.

Review Tech-Data Bulletinsand MSDS before use.

Visit www.scofield.com forthe most current versions.

* Porcelain Gray and Shadow Slate are only available in CHROMIX P (powdered) form.Colors shown approximate the color of broom-finished concrete flatwork made with a medium-gray cement and curedwith LITHOCHROME Colorwax or COLORCURE Concrete Sealer in the matching color. Concrete not so cured will haveless brilliance.Concrete should be batched and placed in accordance with Tech-Data Bulletins.Concrete color is altered by many factors, including cement and aggregate color, slump, finishing practices, and curingmethod. Using the contemplated materials and construction techniques, representative samples should be cast forapproval, especially when exact color matching is important.

C o l o r S e l e c t i o n C h a r t A – 3 1 2 . 1 5

www.scofield.com

CHROMIX® Admixturesfor Color-Conditioned® Concrete

L. M. Scofield Company 1 800 800 9900 FOR PROFESSIONAL USE ONLY© L. M. Scofield Company 2009 – All rights reserved. CHROMIX, COLORCURE, LITHOCHROME, SCOFIELD, , Color-Conditioned, Colorwax, and Texturetop are trademarks of L. M. Scofield Company.

SA-CA-09

C-27 Westwood Brown

0288 Autumn Beige

C-26 Antique Cork

3987 Porcelain Gray*

C-25 Sombrero Buff

5234 Summer Beige

C-20 Limestone

5059 Sorrento Red

5238 Sunbaked Clay

C-32 Quarry Red

C-15 Coachella SandC-14 French Gray

C-12 Mesa Beige*

1266 Cool Gray

1017 Barcelona Brown

C-22 Coral Red

6063 Winter Beige

5130 Spring Beige

C-24 Charcoal

C-31 Shadow Slate*�

C-11 Desert Sand

C-34 Dark Gray 1010 Brownstone C-21 Adobe Tan

Chromix® Integral Colors


#1 - Level, patch and repair as needed

#2 - Grind to your desired finish

#3 - Harden and densify your polished concrete with FGS/Hardener Plus

#4 - FGS/PermaShine polished concrete. See the results for years

Call Jobsite Supply for Certified Applicators of FGS PermaShine!

DECORATIVE CONCRETEPolished Concrete

Step 1Choose Grade

• Grade I - Cream Finish

• Grade II - Salt & Pepper Finish

• Grade III - Aggregate Finish

Step 2Choose Class

• Class I - Low Reflectivity, 400 Grit

• Class II - Medium Reflectivity, 800 Grit

• Class III - High Reflectivity, 1500 Grit

Step 3Choose Color

Color that Sticks to Its Mission.Get color into polished concrete...and keep it there.


HAND TOOLS


213-9ST 9” Ironworker PliersD2000-7CST 7” Ironworkers PliersD2000-9NE 9” High Leverage Side Cutting PliersD2000-9ST 9” High Leverage Ironworkers PliersD201-7CST 7” Side Cutting PliersD213-9NE 9” High Leverage Side Cutting PliersD213-9ST 9” High Leverage Ironworkers Pliers

32477 10-in-1 Screwdriver/Nut Driver

5459T Leather Erection Wrench Holder5417 Leather Bull Pin Holder with Tunnel Loop

3262 15/16” Barrel Type Drift Pin3255 1-1/4” Broad Head Bull Pin3256 1-1/6” Broad Head Bull Pin3246 7/8”x36” Round Connecting Bar3210 1/2” Erection Wrench for US Heavy Nut3212 3/4” Erection Wrench for US Heavy Nut3222 3/4” Erection Wrench for US Regular Nut3239 Adjustable Head Construction Wrench

70050614” Long Handle Floor Scraper

147751-1/2” x 3 - 1/2” x 16’ Screed

7002273-1/2” x 16” Mini Slick Magnesium Float

700524 1-3/4 x 6’ Snap Handle38 Red Rubber Float145 16x3 Magnesium Float Wood Handle148 16 x3-18” Magnesium Float SF Handle840 6 x 3 x 1 Rub BrickMXS56D Xtralite Finish TrowelMXS66RED 16 x 4 Finish Tri-RND FE CurvMXS81RE 18” x 4” Finish Trii-Fully RD WoodRL6 Leveler Bullfloat BracketSP16 16 x 3-1/2 Pool Trowel CH145D 16 x 3 Magnesium Float Dura-Soft Handle148D 16 x 3-1/8 Magnesium Float w/ Dura-Soft Handle16-MRL Large Mini Rock-It 1-3/4 Adapter16-RKT-N Rock-It Adj Bull Float Bracket

17-8ASU JS-Blue Snap Handle 1-3/4” x 6’700780 48” Cleform Weighlite Broom

BFKIT5Complete Bull Float Kit

OAP927All Aluminum, Red HDL Kumalong

7007124526D 16” Canvas Resin Float

700820 #14572 4” x 24” Unimixer701037 1” x 2” x 10’ Aluminum Straight Edge701048 HWY Lute Socket for 702366702366 30 x 3 x 1” Lip HWY Lute Blade704419 #13987 4’ Big Blue Float704559 Open Style Rebar Cutter/Bender704639 #7239 Rebar Hickey Bender704801 #7259 3’ x 3-1/2” Resin Darby704858 Cleform Wizard Bar 48” x 7/8”704870 T-Probe Steel790270 4’ Round End Channel Float8043872 6’ Post Hole Tamping Bar

70226548” R/E Bull Float Blade

706164148LRWThinline Float

700524M1 x 3/4 x 6’ Lightweight Magnesium Snap Handle

693SharpShooter I Hopper Gun

Tools

Tie Wire & Contractor Wire

MMW 16 Gauge Tie Wire

MMWSSSharkskin 16 Gauge Epoxy Coated Tie Wire

6051569 18” Bolt Cutter6051577 24” Bolt Cutter6059884 36” Bolt Cutter

• Rubber Handles

• Chrome Vanadium Steel

Drillco Cutting Tools

Stocking a wide range of cutting tools:

General Purpose HSS Jobber Length Drill Bits

• Fractional 1/16 to ½” 118 degree black

Nitro Heavy Duty Mechanic Length

• 1/16” to ½” with 3 milled flats• Black and Gold Surface Treatment• Used on Hard Metals and Stainless Steels• Also available in Stubby Lengths

HSS Hand Taps-Plug Style

Sizes:• 6-32,8-32,10-24,12-24,1/4-20 and 3/8-16• Other sizes available upon request

Silver & Deming Bits

• 1/2” to 1-1/2” with 1/2” Shank

Fiberglass Extension LaddersD6200 Series - Type 1A - 300lb. Rated• Base & fly separate to use base as separate ladder• Slip resistant Traction-Tred® D-rungs• Heavy duty pulley with rope; Rope clamp ties rope

to rung• Compliance: ANSI A14.5/OSHA

Fiberglass Step Ladders6200 Series - Type 1A - 300lb. Rated• Fiberglass rails with pinch

proof spreaders• Double riveted Traction-

Tred® steps• Compliance ANSI A14.5/

OSHA

Model Size Bottom Width Spread6204 4’ 19-7/8” 29”6205 5’ 21-5/8” 35-1/8”6206 6’ 23-3/8” 41-1/4”6208 8’ 26-7/8” 53-5/8”6210 10’ 30-3/8” 65-7/8”6212 12’ 33-7/8” 78-1/4”

Model Size Standing Level

Bottom Width

Weight

D6216-2 16’ 13’ 19” 36D6220-2 20’ 17’ 19” 44D6224-2 24’ 21’ 19” 52D6228-2 28’ 25’ 19” 59D6232-2 32’ 29’ 19” 71D6236-2 36’ 32’ 19” 84D6240-2 40’ 35’ 19” 92


Re-Chargeable Battery Operated Re-Bar Tying Tools

RB397• 5 times faster than hand

tying• Lithium-ion battery• Approx. 2,000 ties per

charge• Applications: Building

foundations, precast concrete products, floors & walls, retaining walls & swimming pools

MAX RE-Bar-Tier™

Large Capacity Re-Bar Tool

RB655• Makes ties in approx 1

second with consistent tie strength

• High speed saves you time & money

• Wire usage is regulated automatically

• Applications: Commercial building, road & bridge construction, foundations, precast plants, radiant heating tubes, electrical conduits

Sprayer AccessoriesNozzles - Repair Kits - Extensions

JS1993 3.5 Gallon Sprayer• NEW Holster for wand & nozzle

storage• NEW Metal Ergo pump handle• Fremale brass fan nozzle at-

taches directly to shut-off or extension (.5gpm & 1.0gpm included)

• 14” Heavy duty hose• Wide mouth opening for easy

filling/cleaning• Tri-poxy® coated steel tank

rinse cleaner• Shut-off with lock-on spraying

feature

HAND TOOLSChapin Xtreme Sprayer

Sprays up to 30- 35% Solids

6-600 Adjustable brass nozzle for sprayers6-5797 Brass fan nozzle for 1949-male thread1-5943 1GPM brass fan nozzle - female thread6-7703 24” brass curved extension with male

end for 1954 sprayer6-7704 24” brass urved extension with female

ends for 1949 sprayer6-7711 18” curved extension male end for

1954 sprayer6-4627 Repair kit for 1954 sprayer - also fits

1280 & 2123 sprayers6-6091 48” hose assembly for 1954 sprayer6-613 42” nylon reinforced hose with

connector & clamp

Tie Wire

For use with Max Tools 14.4 Volt Re-Bar Tying Tool

MAXTW1525 Max 16 Gauge Tie Wire (RL)MAXTW897 Max 21 Gauge Tie Wire (RL)

The Lock-In Accessory System lets you customizeyour ladder top and safely secure your tools.

Ladders

Molded rung braces

Rope clamp ties rope to rung

Rugged gravity spring locks operate smoothly

Slip-resistant Traction-Tred® D-rungs

Heavy duty pulley with rope

Direct rung to rail connections

External guides at top of base section securely interlock rails

Interlocking side rails

Base & fly separate easily to use base section as single ladder

Internal guides on bottom of fly section securely interlock rails

Durable rail shield bracket & shoe with Shu-Lok®, slip resistant pad & spur plate

E3-16C

E3-16C 16oz Curved Claw HammerE3-165 16oz Straight Claw HammerE3-205 20oz Straight Claw HammerE3-245 24oz Straight Claw Hammer

Hammers & Pry Bars

JS1993 Sprayer


Groovers & Trowels

HAND TOOLS

www.jobsitesupply.com TOLL FREE 1-800-874-7415

CF216C 14”x3” CB trowelCF304 10”x14” float trowel blade (slip on)CC275-01 10”x18” HD float trowel blade (slip on)CC380 9x12 Power Groover - 3/4” BITBRKT

CF141 6”x3”1/4”R Curved end edger w/ wood handles SS

CF146 6”x4”1/2”R Outside curb & sidewalk tool SSCF149 6”x8” Edger/grooverCF165 6”x4-1/2” Stainless EdgerCF165PF 6”x4”x1/2” RAD Edger PF HandleCF166 8”x4”1/2”R Cement edger w/ wood handle

SS

Stainless Steel Edgers

CC152• Stainless Steel• Extra smooth

Denver Slider Knee Boards

EZY-Tilt II Float Bracket 6 Hole

CC294• Made of rugged

lightweight aluminum• One to one turning ratio

of handle and pitch of blade

CC296 KnuckleHead II Bullfloat Bracket

Concrete Chutes

CC992F• Constructed of

heavy gauge aluminum

• Reinforced with cross braces & flanged edges

Chamfer Hand Edger

14816-34• For 16” form tube • Made of long wearing

bronze with 1” lip• Belt polished surface

for clean, smooth edges

Buckaroo with Level - Handle

CC421L 4” Buckaroo w/ Level Vial

4’ x 7-1/4” Wood Bullfloat

CC782-01• Long lasting, laminated float with bracket• Brass threaded inserts for superior strength

48” Fresno Trowel

CC834-01• All angle steels • Available in round or square end• Fitted with 360 degree all angle bracket

Magnesium Float w/ Handle

CF016PF• Superb floating action• Soft textured ProForm handle with special

ribbing for that “Great Grip”• Tough durable Extru-Lite Magnesium blade

CF194 Gutter Tool 3” RadiusCF385 Sonotube EdgerGG432 MSN 5”x2” Margin TrowelWL088 1” DBL Felt Leather Knee PadGG630 Big John HD Pry Bar 56” 14”WL069 EZ Kneeler Kneeboard

Other Items

Tools

Vari-Strut Door Buck Brace11-129• Adjustable from 5’ 9”

to 10’ 6”• Plated throughout to

resist rust• Brace struts to floor or

ceiling

Handicap Float12-517-B8• 42” long - 8” wide• Makes 3/8” deep

by 3/8” wide penetrations on 2” centers

• Meets the handicap ramp specifications of many states

11-305B5 Brick Tile Wheebarrow11-890 Adjustable Backer Rod Tool12516B6 Handicap Ramp Hand Float 10x812564B6 Single Cutter Handi Ramp Float12-864-B9 6”x6”x45 Chamfer Edger14-487 Band Tightener-Tensioner14-660 6-1/2’ Gammon Reel14712B10 8” Razor Scraper 39-59” Adjust19-113-B7 Crack Filler/Pouring Pot22556B6 Handicap Walking Groover

Grease Guns

NATIONAL SPENCER

Zinc Plated Pistol Grip Grease Gun with 12” HoseHD4A• Lever Style Grease Gun with variable stroke

Drum Pumps

Drum Pump381-4• Fits 15 through 55 gallon drums with 2” opening• Dispences approximately a pint per stroke


HAND TOOLS• For use on walk-behind & ride-on

power trowels• Silver polished blade gives maximum

flext to ensure a smooth finish.

WX1014FO 10”x14” float trowel blade (slip on)WX1018HD 10”x18” HD float trowel blade (slip on)WX614F 6”x14” finish trowel blade (bolt on)WX618F 6”x18” finish trowel blade (bolt-on)

WX Series Blades

C6TC14

Wheelbarrow

• 6 cubic foot seamless steel tray

• Total control grips are injec-tion molded from tough, lightweight polypropylene for maximum performance and durability • 6 cubic foot seamless steel tray

Available Through Jobsite Supply!

• 6 Cubic Foot Capacity Steel Tub• Steel Handles with Rubber Grips• Foam Filled “No Flat” Tire

• 6 Cubic Foot Capacity Steel Tub• Hard Wood Handles• Pneumatic 2-ply Rubber Tire

Wheelbarrow

Shovels

Seymour SV-DR42 28” Round Point Shovel W/ Fiberglass Handle, Poly D Grip, #2 Front Turn Step & 8.8” x 11.5” Head

Seymour SV-DS43 28” Square Point Shovel W/ Fiberglass Handle, Poly D Grip, @3 Front Turn Step & 9.7” x 11.5” Head

Seymour SV-DD46 28” Drain Spade W/ Fiberglass Handle, Poly D Grip, Front Turn Step & 5.5” x 16” Head

WB-6SHDS

WB-6S

M6

BP8

• 6 cu.ft. capacity• 16 guage seamless

tray• 16” wheel assembly

with pneumatic• 2-ply tire and ball

bearings

• 8 cu.ft. capacity• Corrosion proof poly

tray• Two 16” pnuematic

tires

SV-DR42

SV-DD46

SV-DS43

77315Wheelbarrow from Orgill

IN STOCK

1328400Jackson #2

Asphalt ScoopSV-LS31 Long Handle Square Point - WoodSV-LS41 Long Handle Square Point - FiberglassSV-LS-11 Long Handle Square Point - PromoSV-LR30 Long Handle Round Point - WoodSV-LR40 Long Handle Round Point - FiberglassSV-LR10 Long Handle Round Point - Promo

HAND TOOLS

AviationSnips - 10”• Have multiple pivot pins that providecompound cutting action

• Hot drop forged steel blades providemaximum strength

PART NO. Cutting Pattern2073111 Cuts left and straight2073112 Cuts right and straight2073113 Cuts left and straight

IRWIN®Bi-MetalUtilityBlades• Welded Bi-Metal for sharp edge andflexible body• Stay sharper3X longer thantraditionalcarbon blades

PART NO. Description2084400 100 pack

FoldingUtilityKnife• Compact rugged design• Quick-Change Button™ for easyblade changes

Part No. 2089100

100’Speed-LineChalkReel• Locking metal handleminimizes tangles

Part No.64310

QUICK-GRIP®BarClamps• 24” length, 3-1/8” throat depth• I-beam bar reduces flexing and bowing

Part No. 223124

StandardRetractableUtilityKnife• Includes 1 IRWIN BLUE BLADEBI-Metal utility blade

Part No. 2082101

15”ProTouchSaw• 9 point tooth count

Part No. 2011201

STRAIT-LINE®Caution Tape• 1000 ft. x 3”

Part No. 66231

VISE-GRIP®Curved JawLockingPliers• 10” length, 1-7/8” jaw capacity

Part No. 4935576

Speed-Line LumberCrayon• Yellow, 12 pieces

Part No. 66406

VISE-GRIP®11”LockingC-ClampwithRegular Tips• 10” length, 1-7/8” jaw capacity

Part No. 19

STRAIT-LINE®MarkingChalk• 5 lb. orangehi-vis

Part No.65105

IRWIN®ClassicSawBlade• 7-1/4” x 24T, ATB• For Framing/Ripping/Decks

Part No. 25130

MARATHONSawBlade• 7-1/4” x 24T, ATB• FASTEST FRAMINGBLADE EVER™

Part No. 24030

IRWIN®MetalCuttingSawBlade• 7-1/4” x 48T, MATB• For steel/thin steel

Part No. 4935555


MFG# Twister-XL28-15• High performance in both

fixed & portable drilling • NOMO (Nitride on Margin

Only) increases surface hardness & extends tool life

• Recommended for tough applications & materials including stainless steel

MFG# XLUB16• Formulated to extend tool life

& reduce chip welding• Provides a precision finish

with closer tolerances on finished work

• Clings to tools for a continu-ous shield against friction & heat

• Effective on stainless steel, aluminum & exotic alloys

XL86 & HX80• Designed for aligning &

enlarging holes in structural steel, bridge & ship building

• Hex Shank is engineered to enable use in impact socket

• heavy duty reaming of off-size, misshapen & misaligned holes

HSS Annual Cutters• High speed annual cut-

ters (M2) which features Champion’s exclusive Plus 20 surface treatment

• Provides cleaner cuts• Positive slug ejection &

longer tool life

Your Source for Innovative Cutting Tools

HX80-13/16 Hex Car Reamer 13/16” Straight HX80-15/16 Hex Car Reamer 15/16” StraightHX80-1-1/16” Hex Car Reamer 1-1/16” Straight Twister XL28-15 Twister 15 Pc Mechanical Drill SetUS5-10 #10 HSS Jobber Drill Bit 118*US5-11 #11 HSS Jobber Drill Bit 118*US5-20 #20 HSS Jobber Drill Bit 118*US5-3 #3 HSS Jobber Drill 118*US5-42 #42 HSS Jobber Drill 118*US5-47 #47 HSS Jobber Bit 118*XLUB-WAX16 17oz Brute Lube Cutting WaxXLUB-16 Brute Lube Cut & Tap Fluid 16ozXL200P Pilot Pins for XL200 CutterXL200-1 1”x2” Annular Cutter HSSXL200-13/16 13/16”x2” Annular Cutter HSSXL200-15/16 15/16”x2” Annular Cutter HSSXL200-1-1/16 1-1/16”x2” Annular Cutter HSSXL300P Pilot Pin for XL300 CutterXL300-13/16 13/16”x3” Annular Cutter HSSXL300=15/16 15/16”x3” Annular Cutter HSSXL300-1-1/16 1-1/16”x3’ Annular Cutter HSSXL86-13/16 Hex Bridge Reamer 13/16” SpiralXL86-15/16 Hex Bridge Reamer 15/16” SpiralXL86-1-1/16 Hex Bridge Reamer 1-1/16 Spiral405-F Letter F HSS Drill 118 Bright

HAND TOOLS

PFE-69846 4-1/2” x.045x7/8”Cutting for Metal Type 1PFE-63162 4-1/2”x.045x7/8” Cutting for Metal Type27PFE-63114 4-1/2”x3/32”x7/8”Cutting for MasonryPFE-61038 4-1/2”x1/4”x5/8-11”Grinding for MetalPFE-61026 4-1/2”x1/4”x7/8” Grinding for MetalPFE-61042 6”x1/4”x5/8-11 Grinding for MetalPFE-69865 6”x.045x7/8” Cut-off for Metal Type 1PFE-63164 6”x.045x7/8” Cut-off for Metal Type 27PFE-61006 7”x1/4”x5/8-11 Grinding for Metal

Grinding & Cutting Wheels

Chop Saw BladesPFE-64502 14”x3/32”x1” Chop Saw Blade

PFE-64014 12”x1/8x1 Blade for MetalPFE-64012 12”x1/8x20mm Blade for MetalPFE-64402 14”x1/8x1 Blade for MetalPFE-64236 14”x1/8”x20mm Blade for MetalPFE-64232 12”x1/8”x20mm Blade for ConcretePFE-64234 12”x1/8”x1” Blade for ConcretePFE-64016 14”x1/8”x20mm Blade for ConcretePFE-64238 14”x1/8”x1” Blade for ConcretePFE-64018 14”x3/16”x1” Blade for Concrete

Blades

2218 18” Medium Brown Plastic2224 24” Medium Brown Plastic2236 36” Medium Brown Plastic

No. 21 Concrete Finishing BrushesStaple set in clear lacquered hardwood block with one threaded handle hole. Three rows of filling material.

No. 22 Line Garage BrushesCoarse Brown Plastic. Staple set in clear lacquered hard-wood block. Will not soften when exposed to water, oils

or greases

2124 24” Finish Black Poly2136 36” Finish Black Poly2148 48” Finish Black Poly2124-22 24” Finish Broom Red Bristle2136H 36” Horsehair Finish Broom2136-22 36” Finish Broom Red Bristle2148H 48” Horsehair Finish Broom2148-22 48” Finish Broom Red Bristle

Brushes, Brooms & Accessories

232 1-1/2” Chip Brush233 2” Chip Brush234 2-1/2” Chip Brush235 3” Chip Brush236 4” Chip Brush

Chip Brushes100% White bristles. Single thickness. Smooth sanded

handle with tin ferrule. Length of Trim: 1½ inches.

Made of best quality selected broom corn and fibre. Sewed 4 times and

reinforced with a wire band.

Counter Duster: Filling material is staple set in clear lacquered hardwood block. Hang up hole in handle. Brush face length: 9 inches. Overall length: 13½ inches.

Wax Applicator: Two piece clear lacquered hardwood block, plated bolts and wing nuts.

Pad is made of synthetic lambs wool.

2124TPN 24” Straight Squeegee2136TPN 36” Straight Squeegee

4630TPN 30” Curved Squeegee4636TPN 36” Curved Squeegee

Other Products & Accessories

7SC Wire Brush Curved with Scraper9SCO25 1/4” Roller Cover 9”9SC038 3/8” Roller Cover 9”9SC075 3/4” Roller Cover 9”900-516 9” Roller Frame561 Water Brush/Red HandleMET-100 9” Metal Roller Paint Tray18SC038 18” Roller Cover 3/8” NAP18SC075 18” Roller Cover 3/4” NAP1800-112CAP 18” Roller Frame Caps1800-112 18” Roller Frame

54

2210N

Warehouse Corn Broom5032

Squeegees


HAND & POWER TOOLS


ALSO AVAILABLE

FROM


POWER TOOLS

* Maximum initial battery pack voltage (measured without a workload) is 12 volts. Measure under a workload, nominal voltage is 10.8.

See the Next Page for Corded Power Tools &

Accessories from

POWER TOOLS & ACCESSORIES

See Page 56 for Additional Hand Tools from

* With respect to 12V Max*, maximum inital battery voltage (measured without a workload) is 12 volts. Nominal voltage is 10.8.* With respect to 20V Max *, maximum inital battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.Speed and runtime claims are versus leading 18 volt lithium ion tools. Weight blaim is versus DC9096. Copyright ©2012 DeWALT. The following are trademarks for one or more DeWALT power tools and accessories: the yellow and black color scheme; the “D”-shaped air intake grill; the array of pyramids on the handgrip; the kit box configuration; and the array of lozenge-shaped humps on the surface of the tools.


1/2” Magnum Drill with Keyed Chuck0299-20• 8.0 amp motor, 0-850 RPM• Variable speed control• 360 locking side handle

13 Amp Super Sawzall Reciprocating Saw6536-21• 0-2800 SPM variable

speed trigger• Quik-Lok blade clamp

14” Abrasive Chop Saw6180-20• 15 amp, 5.4 max HP motor• 10,000 RPM• Quick change abrasive wheel

system

Deep Cut Portable Band Saw632-6N• 10.5 amp motor• Trigger speed control: 0-420

sfpm• 4-7/8” Cutting Capacity

Tilt-Lok 7-1/4” Circular Saw6390-21• 15.0 amp motor, 5,800 rpm• Tilt-Lok main handle adjusts

to the work• Superior blade visibility from

either side

POWER TOOLS


11 Amp Sawzall Reciprocating Saw6509-31• 11.0 amp Milwaukee-built

motor • 0-2800 SPM variable speed

trigger

2601-22 18V 1/2” Compact Driver Drill Kit

Bi-Metal Reciprocating Saw Blades• Long Life - patented tooth design provides long blade life• Efficient Cutting - optimized for specific applications• Durable Construction - shatter resistant, bi-metal designprovides the flexibility and durability single-metal blades can’t

Part No. TPI Length x Width x Thickness Pack22754OSB818R 18 8 x 3/4 x .035 5022751OSB618R 18 6 x 3/4 x .035 5022758OSB110R 10/14 12 x 3/4 x 1.3 5022756OSB614R 14 6 x 3/4 x .035 5022757OSB624R 24 6 x 3/4 x .035 5022750OSB656R 6 6 x 3/4 x .050 5022753OSB810R 10 8 x 3/4 x .050 5022755OSB156R 6 12 x 3/4 x .050 5022761OSB610R 10 6 x 3/4 x .035 50

Gold® Reciprocating Saw Blades• Extended Blade Life - reinforced tooth design and precisionapplied titanium coating dissipate heat• Faster Cuts - titanium coating makes teeth more wear resistantso they stay sharp for quicker cuts• Durable Construction - Bi-metal design stands up to the mostdemanding applications

Part No. TPI Length x Width x Thickness Pack21070818GR 18 8 x 3/4 x .035 521067614GR 14 6 x 3/4 x .035 521069618GR 18 6 x 3/4 x .035 521062956GR 6 9 x 3/4 x .050 521064610GR 10 6 x 3/4 x .035 521065810GR 10 8 x 3/4 x .050 521072624GR 24 6 x 3/4 x .035 521061156GR 6 12 x 3/4 x .050 5

Bi-Metal Hole Saws• Durable - TUFF TOOTH design is reinforced to cutstronger and last longer• Long Lasting - Patented VARI-TOOTH® design resiststooth strippage• Stays Sharp - high speed steel teeth resist breakingand offer extended life• Withstands High Torque - thick backing plate with holesfor drive pins resists damage due to high torque

Part No. Diameter Pack3001212L 3/4” 13001616L 1 13002020L 1-1/4” 13002828L 1-3/4” 13003434L 2-1/8” 13004040L 2-1/2” 13004444L 2-3/4” 13004848L 3” 13005656L 3-1/2” 13007272L 4-1/2” 13008080L 5 13009696L 6 1

Metal Cutting Circular Saw Blades• Extended Life - titanium carbide tipped resistsmaterial build-up on teeth• Clean, Cool Cuts - less burr than abrasive bladesno need for secondary grinding• Modified Triple Chip Grind -for added durability• Resharpenable

Part No. Description21885ST900048CT 9” x 48T21884ST800050CT 8” x 50T

WOLF-BAND® Band Saw Blades• Long Lasting - high speed steel teeth providea strong, long lasting cutting edge• Shatter Resistant - Bi-metal blades bend andresist breaking and extend blade life• Exceptional Value - professional performanceand competitive pricing provide extraordinarycost-per-cut value

Part No. Description800938PW14185 7/8 x 1/2 x .020 14/18 TPI

9 Piece General PurposeHole Saw Kit• Includes: 7/8”, 1”,1-1/4”, 1-3/8”,1-1/2”, 1-3/4”,2-1/8” hole saws;SNAP-BACK arbors:5L, 6L; and moldedcase

Part No. 30807700G

Aviation Snips Straight• Long Blade Life - precision-formed blades• Comfortable Grips - over-molded handleswon’t slip or twist

Part No. 22103103

Gripple Cable Hanger System

The Original Metal Framing System

*Call for availability

*Call for availability

Chop Saw

Corded & Cordless Drills

Corded Saws

Sawzalls


POWER TOOLS

3/8” Right-Angle Drill1132VSR• 3.8 amp all ball bearing

motor, 0-1100 RpM• Variable speed dial• Ideal for drilling in tight

spaces

14.4 V Brute Tough™1/2” Drill/Driver35614• 550 in. lbs. torque &

0-500/0-1700 RPM• 25 position clutch• 2-speed gearbox

18V Litheon Brute Tough™ Drill/Driver37618-01• 2X battery life• High torque mode produces

over 650 in. lbs.• High speed mode produces

1,800 RPM

18V Litheon 1/2” Hammer Drill Driver17618-01• 2X battery life• High torque mode produces

over 650 in. lbs.• High speed mode produces

2,050 RPM

36V Litheon Bosch Brute Tough™ 1/2” Drill/Driver38636-01• Performs after repeated

1-story drops• 600 in. lbs. of torque• 15 position clutch

18V Impactor™ Cordless Fastening Driver• Delivers up to 1,350 in/lb of

torque• Category best 3,200 BPM &

2,800 RMP• 1/4” hex drive with quick release

12V Max Pocket Driver™PS20-2A• 100 in. lbs. of torque• Variable speed trigger• 500 RPM

1-3/4” SDS-Max®

Rotary Hammer11263EVS• 13.5 amp• 2 modes of operation,

rotary hammer & hammer only mode

• Variable speed dial

1-9/16” SDS Max®Combination Hammer11240• 10.0 amp• 2 modes of opera-

tion, rotary hammer & hammer only mode

• Vario-Lock™ positioning

SDS-Plus® Chipping Hammer11320VS• 6.5 amp, 0-3500 RPM• Vario-Lock™ positioning• Bit can be angled in any

12 positions• Variable speed trigger

14” Abrasive Cutoff Machine1365• 15 amps, 4,300 RPM• Wrap around side handle

mounts left or right• Wheel rotation carries

sparks, dust & debris away from operator

Top Handle Jig Saw with L-BOXX1590OEVSL• 6.4 amps, 2,800 SPM• 4-position orbital

control• Variable speed dial

5” Tuckpoint Grinder• 10 amps 11,000 RPM• Lock on/off switch• Perfect for concrete

surfacing such as de-burring & refurbishing

7-1/4” Circular Saw with Built-In Rafter HookCS10• 15 amp motor• Adjustable bevel &

depth levers• Soft grip handle

7-1/4” Worm Drive Construction Saw1677M• 15 amp motor• 50” bevel capacity with

positive stop at 45o

• Built-in saw hook

2” SDS-Max® Combination Hammer11245EVS• 14.0 amp• 2 modes of operation,

rotaryhammer & ham-mer mode only

• Variable speed dial

Brute™ Breaker HammerBH2760VCD• 15.0 amp• 43 ft. lbs. impact energy• No load BPM 1400

7-1/4” Magnesium Worm Drive SawSHD77M• Magnesium die-cast

housings make this saw 2 lbs lighter than aluminum models

• 15-amp motor deliv-ers the power to rip through more lumber in less time

• Tough worm drive gearing lasts 5 times longer than hypoid gears


35-Pound 1-1/8-Inch Jack Hammer Kit11335K• 1300 BPM for breaking

concrete and asphalt, bushing, driving ground rods, scraping floors, digging and tamping



Rotary Hammers

Saws

Grinders

Worm Drive Saw

JOBSITE PROTECTION


Dust ControlCONTROLS DUST

INSTALLS IN MINUTES!• Floor Finishing

• Painting• Demolition

• Window Installation

Wet/Dry Vacuum Cleaner

• 12-Gallon • 5-Horsepower wet/dry vacuum built for

jobsite or garage• Single-stage bypass motor with super

quiet operation• 3-Level filtration system

962-1200

Floor Protection

Builder Board

38”x100’ Heavy Duty Floor Protection

• 38” x 100’ • 48Mil Thick • 100% Recyclable • Heavy Duty

Construction Board For Temporary Surface Protection

Dustless® Wet/Dry Vacuum16003

• Better than a shop vacuum• Switch from wet to dry vacuuming without

changing filters• Designed specifically to capture extra fine

dust• Excellent for drywall, concrete, stone &

fiberglass

Dustless® HEPA Vacuum16006

• Certified to meet EPA Lead-Safe standards• Switch

between wet & dry without stopping• Interior baffle/

wall keeps the HEPA filter dry at all times• Captures particles

down to 0.3 micron• Maintains suction

after ingesting 40lbs of fine dust

13001 Filter Pack Wet/Dry Dustless13141 Pre-Filer Bag Pack of 2 Dustless13201 Dustless Hepa Replacement Filter 1600613301 Dustless Hepa Filter Cover14172 Y Connector 2” Dustless14291 25’ x 1-1/2” Hose Dustless

Work Wear

Protective Work Gloves

34-800 G-Tek Maxifoam- M-L-XL95-809 Brown Jersey Glove34-875 G-Tek Maxiflex Ultimate19D-622 Great White Cut ANSI Level 2 - L-XL19-D330 G-Tek 3GK ANSI Level 4 - L-XL-XXL

• Full cut sizes to fit over clothing

• Constructed with heavy weight PVC

• Jacket, bib pants, detachable hood

• Fits over most work shoes & boots

• High chemical resistance

• 5 buckle available in most sizes

• Slush Boot has no right/no left for a no hassle design

• Sizes Available: 8-16

• Rubber soles

Knee Pads• G340 - Gel Pro with

Velcro• G351 Gel Pro with

Snaps

Slush Boot 5-Buckle Boot

Rain Gear

• Allows Moisture And Vapors To Escape For Curing

• Non-Staining• Re-Usable


G-Tek 3GX ANSI Level 319-D310 L-XL• Poly Coated

Nitrile Glove Gray Dip34-225 M-L-XL

G-Tek Maxiflex Endurance34-845• Foam Nitrile Dotted Palm

JOBSITE PROTECTION


Step n’ Peel Clean Mat

Clean MatsCarpet Shield

Plastic Shoe Covers

Carpet Shield Clear, self-adhering film protects all types of carpeting for up to 30 days without leaving any adhesive residue. Highly resistant to tears or punctures. Ideal for remodeling, painting & moving. Helps minimize clean-up time and damage. (Rev Wound)

CS24200L Carpet Shield 3MIL 24”x200’ CS 30200 Carpet Shield 30” x 200’ 3MIL CS 36200 Carpet Shield 36” x 200’ 3MIL

Clean Mats The Clean Mat is a polyethylene film mat with a tacky surface that removes dust & dirt from footwear & prevents it from being tracked throughout the work area. Each mat contains 30 sheets which are tabbed for easy removal of each layer. Stays firmly in place & is easy to dispose of.

CM2436B4 Clean Mat 24 x 36” Blue 30 SheetsCM3636B4 Clean Mat 36 x 36” Blue 30 Sheets

Plastic Shoe Covers Plastic Shoe Covers are the perfect choice for protection from mud, moisture, scuffs & heel marks. Show your customers that you care by wearing these waterproof, disposable shoe covers.

SC3001PB Shoe Cover Disposable 10PR/BG

Step n’ Peel Clean Mat The Step n’ Peel clean mat is a polyethylene film mat with a tacky surface to remove dust & dirt from footwear. This unique product features a sturdy, reusable platform constructed of rigid polystyrene, available with a nonskid backing that holds it securely to floor surfaces such as carpeting, tile, concrete etc. Containing 30 tabbed layers of film mounted on a black frame.

ADDITIONAL ITEMS

DSPR02 Dust Shield Pro Pole 12’ 2/PKFS24200 Floor Shield 24” x 200’ ClearPS3250 Pro Shield 32” x 50’ Gray 3 MILQS9100 Quick Shield 9” x 100’ RollW3C24600 Window Shield 24” x 600’ MED DUTZU02 Dust Shield Zipper 2PK 3” x 7’

• 32” Inside Diameter• Thicker, More Resilient

HDPE• Complete System for Your

Every Need• All Harware is Galvanized • Sections are Telescopic for

Ease of Storage• Complies with OSHA per

1926.252• Can Be Used For: Roof-

ing, Renovation, New Construction

External Chutes

Internal ChutesLinen Chute

Trash Chute

DURACHUTE™

DURAFLAT™• Economical, Light-Duty Flat Chute

System• Stores & Ships Flat• Easily Assembled Using Standard

Hand Tools• Sections are 4’ in Height (3’6” useable

chute), 1/8” Thick, 30” Wide & Weighs 28lbs each

Our Trash & Linen Chutes are better looking, longer lasting, easier to clean, and require less maintenance. Our trash chutes are also outfitted with the only intake door on the market with both front and back stainless panels and skirts.

*SEE PREVIOUS PAGE FOR JOBSITE SUPPLY BUILDER BOARD & ZIPWALL DUST

CONTAINMENT *

2700-34 3/4” Orange Polystrap 1650 ft.2700-34-250 3/4” Polystrap 250 ft. Roll

JOBSITE PROTECTION

This self contained strapping system weighs only 17 lbs. and packs the power of steel strapping but with the portability of a lunch box. Safely

strap-up jobsite materials for transport with nearly 3000 lbs. of breaking strength.

Features & Benefits• Coil weighs 1/4 the weight of steel

strap coils.• Reduced failure rate compared to steel

strap.• Ease of disposal.• Will not rust, stain or damage product.• Virtually eliminates worker compissues

related to back injuries or skin lacera-tions.

• Strap stays tight and does not loosen.• Ability to retension strap and reuse

strap.• Polyester strap shrinks or expands with

loads.EZ-SK DF-1

Forklift Mounted Dispenser

M370 ORS1100

RBT1000

Round Bundle Tensioner

PLT

Pallet Feeder Tool

MT1

Leverage Tensioning Bar

SBStrap Bean Bag


JOBSITE PROTECTIONRotomolded Tilt Trucks• Manufactured with traditional rotational molding technology• Easy to handle and maneuver•Forkliftablemodel fully compatiblewith forklifts andmanyautomated lifters• Towable/Trainable models wit pneumatic wheels for smoothmovement over a variety of surfaces (5 mph maximum)

Rotational Molded Tilt TrucksPart No. Usage Type Size CapacityFG130400BLA Utility Duty (RM) 1/2 cu yd 450 lb.FG130500BLA Standard Duty (RM) 1/2 cu yd 850 lb.FG131400BLA Utility Duty (RM) 1 cu yd 850 lb.FG131500BLA Standard Duty (RM) 1 cu yd 1,250 lb.

BRUTE® Round Containers & Lids• All-plastic, professional-grade construction will not rust,chip, or peel and resists dents• Strong, snap-on lids provide secure, stable stacking• Gray, white, and yellow are USDA Meat & PoultryEquipment Group Listed and assist incomplying with HACCP guidelines

BRUTE® Round Containers & LidsPart No. DescriptionFG263200GRAY BRUTE® Container without Lid - 32 gallonFG264300GRAY BRUTE® Container without Lid - 44 gallonFG265400GRAY Lid for 2655 BRUTE® ContainerFG265500GRAY BRUTE® Container without Lid - 44 gallonFG264000BLA BRUTE® Dolly for FG2632, FG2643,

FG2655 ContainersFG265000BLA Universal drum dolly for FG2655

Heavy-Duty Utility Carts• Versatile accessories include full andhalf extension drawers, pneumatic wheels,and bins and hooks

• 500 pound capacity• Black finish• Ergonomically designed handle

Contractor Wheelbarrow• All-plastic, seamless pan resists leaking and cracking• Long-lasting hardwood handles for added handlingstrength and sure movement

Part No. DimensionsFG565861BLA 27-1/2” height, 60” length, 27” width

Structural Foam Tilt Trucks• Durability of modern structural foam technology• Ergonomic “steering wheel” handle forbetter handling• Non-marking casters(FG1011, FG9T15 only)• Fits through standard commercialdoorways and onto elevators easily

• Optional hinged domed lid available• Available in 1/2, 3/4 and 1 cu yd sizes

Structural Foam Tilt TrucksPart No. Usage Type Size CapacityFG9T1400BLA Standard Duty 1/2 cu yd 850 lb.FG101100BLA Utility Duty 3/4 cu yd 600 lb.FG9T1500BLA Standard Duty 1 cu yd 1,250 lb.FG131700BLA Lid for FG9T1500BLA

Part No. Description DimensionsFG450088BLA 2-shelf 39-1/4” l x 17-1/8” w x 33-1/4” h

utility cartFG452088BLA 2-shelf 45-1/4” l x 25-7/8” w x 33-1/4” h

utility cart


Corrugate Washout

1 2 3

Concrete Washouts• Outpak Washout is a universal portable washout for concrete, stucco, mortar, paint, drywall mud & more• Compliant• Highly portable• Easy setup & removal

Trash Bags

• 3 Mil Thick• 20 Per Box• Twist Tie Closure

42 Gallon Trash BagsHK42020B

Sweeping Compounds

1013350050# Wax Based Sweeping Compound

SC100# Oil Sweeping Compound

945-1234044’x4’x14” Corrugate Washout

Rotomolded Tilt Trucks• Manufactured with traditional rotational molding technology• Easy to handle and maneuver• Forkliftable model fully compatible with forlifts and many automated lifters• Towable/Trainable models with pneumatic wheels for smooth movement over a variety of surfaces (5 mph maximum)


WATERPROOFING

Expanding Waterstops for Concrete Construction Joints

RX 101 - 3/4” x 1”Designed for vertical & horizontal concrete 8” thick or greater.

RX 101T - 1-1/4” x 1/2”Reinforced trapezoidal designed for shotcrete, extreme hot weather & difficult applications.

RX 102 - 3/8” x 3/4”Designed for vertical & horizontal concrete 5”-8” thick.

Voltex®

Voltex Voltex 4’x15’ Voltex DS Voltex DS 4’x15’-5”Seam Tape Seam Tape 3”x50’ (8 rolls per box)

Swelltite®

Pavers Grout or Sand Setting Bed

Aqua DrainSwelltite®

Structural Deck

Swellt SwellTite 40”x37’ (125 SF roll)

UltraSeal®

Ultraseal BT Ultraseal (BT) 4’x25’ RL (100SP) - 30lbsUltraseal SP Ultraseal (SP) 4’ x 25’ RL (100SP)

• Waterproofing• Air & Vapor Barriers• Deck Coatings• Miradrain Technology

PVC Waterstops

Available in several styles & sizes!

• Waterproofing• Joints • Masonry

• Peel & Stick Teflon Cover

• 100% Factory Tested• 8 Ft. Grounded Cord

Waterstop Splicing Iron

CETSEALTUBE• Required for adhering/sealing RX 101 & 102 Waterstops• Caulking Tube available in 20 foil pack for bulk tools• One tube covers 20 LF using 1/4” bead

Product Size Shape LN FT/Carton

RX-101 1”x3/4”x16’x8” Rectangle 100lf. (30.4m)

RX-101T 1-1/4” x 1/2” x 20’

Trapezoid w/ Poly Scrim Reinforcement

120lf. (36.5m)

RX-102 3/4” x 3/8”x33’4”

Half Circle 200lf. (61m)

Waterstop RX Product Table

•10 Times Faster•Lowest Cost per Test•Simplest to Use

Moisture Measurment

880 Rapid RH Kit - 01

Moisture Control

Foundation Protector

WATERPROOFING

Double Leakage Protection for:• Block walls• Poured Concrete Walls• Permanent Wood (PWF)• Insulated Concrete Forms• Existing Foundations

Easy to install

XSM2070 6’9” RollXSM2440 8’ Roll

4028330• 1.9 or 2.5 Amps (Low/ High), 110 V• Airflow: 3000 CFM• Width: 19.125” x 19.5” x 15.2”

Z886 Perma-Trench Draining System• 80” Modular Channel Sections with 20”

Grates• .75% Built-In Slope - Handles greater

flows, uniform slope• Radiused Bottom, Better flow rate, less

solids build-up• Smooth High Density Polyethylene • Structural Composite Interior - 0% water absorption

Trench Drain Components

Z880 Trench Drain - 2-1/2” Wide System

Z884 Perma-Trench 4-3/4” Wide Shallow Trench


• 7.5 Amps• 140 Pints/Day at AHAM • Multiple Ducting Options• Ability to Perform in Temps Above 90F

The 200HT Pheonix 200 LGR

DehumidifierThe Phoenix Hepa

Air Scrubber

• 2-Speed operation • Multiple ducting options• Built-in manometer• Only 12 amps

The Phoenix Axial Air Mover w/ Focus

• 3000 cfm (High Speed)• Greater air velocities than competitive products• Focused velocities 0 to over 23.5 feet

RESIDENTIAL


• Scaffold Bracket

• Standard Wedge Bolt

• Waler Bracket

• Heavy Duty Loop Tie

• Standard Wall Tie• Z-Tie Holder

• Turnbuckle

• A full 2” angle cross member assures unsurpassed frame strength & plywood support

• No special tools required; fits most other systems

• Wedgebolt/accessory slots located at 6” on center

Contractor Accessories

16-Gauge Rebar Tie Wire

16-Gauge Black Annealed Bar Ties

Wire Reel

Hand Twist Tools for Bar Ties

Multi-Purpose Stake Puller

Aluminum Chutes

Slurry Chutes

Scaffold Tie (for block or masonry applications)

22 Gauge Brick Anchor

Anchor StrapsNail Steel Stake

Anchor Bolts

Aluminum Forming System

90oAngle Clip

45oAngle Pin

“Silver Bullet”Base Pin

Round Head Pin

Flat Head Pin

Combo Filler Pin

Narrow Curved Hard Wedge

Curved Wedge

Flat Wedge

Smooth/Brick Face Waler Bracket

Scaffold Bracketfor aluminum forming system

Coil Tie

Uniply Forming System

• Window Frames• Class Inserts - Single and Double

Insulated• Straight Back Window Wells• Metal Grates & Escape Ladders• Plastic Covers for Metal Grates• Accessories • And More...

Complete Residential Window Systems


RESIDENTIAL

CellofoamCavity Wall

CellofoamSub-SlabInsulationCellofoam

PerimeterInsulation

Warm up Masonry Walls & Floors

Cellofoam EPS Insulation has the compressive strength & the moisture resistance for unequalled long-term performance in demanding

below-grade applications such as sub-slab & perimeter foundations. Cellofoam EPS significantly reduces heat loss through concrete floors & walls. Cellofoam EPS is resistant to common soil

acids & deay & is easily installed with spot adhesives, fastners or wall ties. Cellofoam EPS resists moisture & increases thermal performance

in cavity wall applications while reducing basement heating requirements.

R10248 2-1/2” R10 4’x8’ Beveled & Scored / SheetR102x8 2-1/2” R10 2’x8’ Non Scored / Sheet

We have everything you need to create and maintain your concrete.

Chemicals - Patch Repair Products & Garage Floor Epoxies - Curing & Sealing

for Sidewalk & Driveway Repair

CONSTRUCTION IDEAS AT WORK

Before After

JS Salt Guard Max

The ultimate driveway, garage & sidewalk

cure & seal.

Before After

VOC

Sealed with JS Honey Brown

Call us for yourVOC

CompliantProducts!

• Curing• Concrete• Finishing• Sealing

• Specially formulated to seal stamped & decorative concrete• Non-bubbling formula - Does not create bubbles from fast evaporating solvents• Slower evaporating than traditional low-VOC products• Less prone to blushing & whitening from over-application• VOC compliant

INDOT APPROVED


GEOTEX® NONWOVEN GEOTEXTILES

1008170 Propex GeoTex 801 - 15’x300’1004840 Propex GeoTex 311 - 15’x300’

1327.05 Silencure A

Bridge Deck Forming

Heavy Duty Bridge Overhang Bracket

Pres-Steel Hanger Types 1, 2 & 7

Filter Fabric

CUSTOM CUTSAVAILABLE

Anchors

Wire Bar Supports - Plain & Epoxy

Slab Bolster

Slab Bolster Upper Beam Bolster

Beam Bolster Upper Continuous High Chair

Continuous High Chair Upper

Bar Chair

Individual High Chair

Paving

Wire Baskets (without Dowels)

Expansion Basket

Contraction Basket

Tie Bar Assembly

See pages 2-5 for more Concrete Accessories

1404 Dow 3”x4’x8’ Blueboard Scored1578 Dow 2”x4’x8’ Blue Board Scored

Jobsite Supply Carries All PreCast Accessories for:

• MSE Walls• Sound Walls• Form Liners with Formwork

Jobsite Supply Carries:• Full Line of Anchors• Structural Steel• All Bar Supports & High Chairs (Continuous & Individual) - Epoxy Coated Available

Jobsite Supply Carries:

• White Wax Curing Compound• VOC Compliant Road & Bridge• Road Fabric & Plastic• Portland Cement• Aspahlt Cold & Winter Patch


• Column Forms• Bridge Pier Forms• Bar Supports• Hangers & all of your concrete accessory needs.

A710 A7 EpconC6-18 Epcon C6A7L Epcon Acrylic 28oz Cartridge

ACC2448-R-BR 2x4 Access Tile Cast in PlaceADA-S2448RD Surf Applied 2x4 ADA Pane RDARMTIL 2x3Panel Armtle 2x3 Panels Brick RedvtARMTILE2x4 Armtle 2x4 Cast PLC ADA RedTBS-101 Adhesive for ADA Retro Panels

890 SL Dow Corning Silicon 5 Joint Sealant888 Hiway Joint Sealant

Products Specification - CategoryEnviroseal 20 909.10 Portland Cement Concrete Sealer -

9551 Material Code - 9554 Source CodeEnviroseal 40 909.10 Portland Cement Concrete Sealer -

9551 Material Code - 9554 Source Code10-60 Rapid Mortar

901.07 Rapid Setting Patch Material - 1097 Material Code - 9554 Source Code

10-61 Rapid Mortar

901.07 Rapid SEtting Patch Material - 1097 Material Code - 9554 Source Code

Set 45 901.07 Rapid Setting Patch Material - 1097 Material Code - 9554 Source Code

Set 45 HW 901.07 Rapid Setting Patch Material - 1097 Material Code - 9554 Source Code

INDOT APPROVED

Crackbond LR321 Ultrabond HS-200 Ultrabond 1 Ultrabond 1300 Ultrabond 2100 Ultrabond 2300 Speed Set 2 Ultrabond 365

♦ Lane Tie Repairs ♦ Sound Wall Erecting ♦ Barrier Expansion ♦ Sign Installation ♦ Pile Splicing ♦ Highway Patching

♦ Highway Reflectors ♦ Light Poles ♦ Curb/Sidewalk Repair ♦ Guard Rails ♦ Bridge Construction

FOR ALL THESE APPLICATIONS AND MORE...

INDOT APPROVED EPOXIES: • Crackbond LR321• Ultrabond HS-200• Ultrabond 1• Ultrabond 1300• Ultrabond 2100• Ultrabond 2300• Speed Set 2• Ultrabond 365


Concrete Sealers & Patch Materials

Joint Sealants

INDOT Approved Epoxies

UPM-BLUE UPM Winter Cold Patch- 50#UPM-Green UPM Spring-Fall Cold Patch-50#UPM-Yellow UPM Summer Cold Patch 50#

Patches

Sealing transverse contraction & expansion joints, longitudinal, center line & shoulder joints in Portland

Cement concrete.

Cast In Place Systems

• certified to meet ADA and State requirements

• integral embedment flanges are the complete anchoring system

• sustains dynamic vehicle loading, AASHTO HS20-44 wheel load test

Support in Partnership with


• Full Line of High-Vis Class 2 & 3 DOT Gear• LED Magnetic Flares & Signs• Personal Protection Lines• Marking & Measuring Tools• Flagging & Temporary Marking Tape• OSHA Compliance Training

MASONRY SUPPLIES

163458 Dow W. Mate 9x100’ Housewrap1404 Dow 3”x4’x8’ Blueboard Scored1578 Dow 2”x4’x8’ Blue Board Scored263104 1/4”x2’x4’ Fanfold - 200SF BDLAF12 1/2” Blue Perimeter InsulationD11248U 1-1/2”x4’x8’ Blue Utility ScoredD148U 1”x4’x8’ Blue Utility Fit ScoredD228HILOAD60 2”x4’x8’ Hiload 60 DOWD248HILOAD40 2”x4’x8’ Sheets Hiload 40 INSUD248U 2”x4’x8’ Blue Utility Fit Scored

Scaffolding

• Extra Coupling Pins

• Extra Toggle Pins

• Adjusting Screw

• Extra Spring Clips for Coupler

• Swivel Caster w/ Bracket• Base Plate

• Scaffold Brace

• Rolling Tower

1001 GR7 Guard Rail 7’1004 GR5 Guard Rail 5’3004 B7H48 7’x48” Cross Brace6010 1/2” Scaffold Wing Nut23001 C-LJR 1.69 Level Jack Rigid26012 C-CP81.69 8” Plastic Caster35021 SH1 19x7 Aluminum/Plywood WalkboardBP1 Base Plate for Scaffold (1.9”)CP Coupling Pin - ScaffoldSP-P6 Walk Plank - Alum & Wood10002-01ASSY 5’x5’ Step Frame w/ Rivet/COLLR16001-01ASSY Open End Frame w/ Rivet/COLLR20060-01 C-GRP4D 1.69 Guard Rail Post25001-02 C-OR 1.69 Outrigger 30”27027-01 C-SB20H 1.69 Side Bracket 20”

• Aluminum/Plywood Walkboards

We can refurbish your

old frames!

Drainage Systems

Pos-I-Tie Veneer AnchorsStone & Masonry AnchorsConcrete Anchors

Masonry AnchorsBlueboard & Other DOW Products

DOW Cavitymate™ UltraMoisture resistant, durable & lightweight extruded polystyrene foam specifically designed for use in wet cavity wall environments. High R value of 5.6 per inch with a comprehensive strength of 25 psi. Ultra has a unique, patented carbon black technology.

DOW Styrofoam™ SM/SBStyrofoam™ Brand Scoreboard Insulation has a high density, smooth extruded skin & square edges on four sides so it fits snuggly against framing. It is scored longitudinally on 16”x24” centers.

DOW Cavitymate™


*Safeway Compatible*

Insulation Tape

MASONRY SUPPLIES


Accessories

• 22 gauge x 10’• Filled w/

polyurethane as rolled formed

• Foam stops concrete grout from entering the slot

Mortar Mixers

7 Cu. Ft. Poly Drum

• Capacity: 1-1/2 to 2-1/2 Bags• 8HP Honda Engine• Manual Dump Action

12 Cu. Ft. Steel Drum w/ Coupler

• Capacity: 3-1/2 to 4 bags• 11HP Honda engine• Cast iron paddle arms

Hohmann & Barnard offers a diverse selection of high quality construction product for the building envelope, many of which qualify as sustainable building materials due to recycled content & help achieve LEED certification.• Masonry Joint Reinforcement• Ladder Joint Reinforcement• Seismic Reinforcement Systems• Truss Joint Reinforcement• Moisture Control Systems (Flashing)• Air & Vapor Barriers• Flashing/Weeps/Drainage• Masonry & Concrete Accessories (Bearing Pads,

Rebar Positioners, Expansion Joints/Control Joints• Anchors & Ties (Masonry & Stone)

ASP-1HD ASPIR-SOLVE - 1galENVIRO1 Envirestore 100 - 1galENVIR05 Envirestore 100 - 5gal101G-5 101G Cleaner - 5gal pail101-5 101 Masonry Restorer - 5gal pail202V-1 202V Vanastop Masonry Cleaner 1gal202V-5 202V Vanastop Masonry Cleaner 5gal pail

202-1 202 New Masonry Detergent - 1gal202-5 202 New Masonry Detergent - 5gal303WB7%-5 303WB Water Repel//Silsilox - 5gal pail333-E5-VOC250

333E Omegaseal - 10% Super Heavy

505-1 505 Coating Stripper - 1gal505-5 505 Coating Stripper - 5gal 707N-5 707N Limestone Neutralizer - PL707X-5 707X Limestone Cleaner - PL900X-1 900X Degrease & Etch - 1gal940-1 940 Iron/Manganese Remover - 1gal

Foamtastic®

22 Gauge Brick Anchor

Scaffold Tie (for block or masonry applications)

Masonry & Brick Chisels

Concrete Repair Restoration

1159 Tube Sand 60lb Poly Cover 42/P115150 Pea Gravel (56/Skid)196156 Mason Sand - 50# Bag

WM70P

WM120SHH

MASONRY SUPPLIES


12” Cutquik® Saw TS410

• 64CC engine• 3.6” depth capacity• Able to be mounted on cart with

adapter kit

12” JS HD Cured* $9514” JS HD Cured* $99

JS Diamond Blades

Tilematic TS 250 X3

• 1.5 HP Baldor Motormax

• Max cutting depth 3.75”

• Max cutting length 24”

Level Eye LadderHook & Eye

• Ladder Style Adjustable Joint Reinforcement with “Lollipop” style Eyelets & Pintles.

• Eyes are double welded on to side wires to provide maximum strength & durability.

• Level Eyes make it easier to maintain 3/8” mortar joint.

• Eliminates weld points that are too thick.

Truss 2 Wire Mesh Reinforcement

• 16” O.C. Truss design positions cross rods on web of block to allow core clearance.

• Simplifies rebar installatino; centering utilizes strength of grout.

• Allows unrestricted flow of grout or loose fill insulation into CMU cells.

• Improves resistance to shrinkage cracking.

Stainless Steel Stone Anchors

Split Tail

Z Bend

L Anchor

L Anchor with Dowel

Dowels

U Anchor

Grout Grunt II

New & Improved!

• Higher Capacity• Faster Pours• Easy to Clean• Rugged

Durability• Lightweight

Scoop - Pass - Pour!

AHD 1616 16in. x 16in.AHD 1818 18in. x 18in.AHD 2424 24in. x 24in.AHD 2436 24in. x 36in.CTR 1616 16in x 16in CTR Access Door w/ Hidden FlangeCTR 1818 18in x 18in CTR Access Door w/ Hidden FlangeCTR 2424 24in x 24in CTR Access Door w/ Hidden Flange

AHD General Purpose Access Doors

The AHD is designed for a quick and easy installtion on non-rated vertical &horizontal surfaces made of drywall or any other type of material.

For All Surface Types

Ladder Wires

24010 24” Level48010 48” Level

MASONRY SUPPLIES


BL147MSN Adjustable Line Stretcher•Adjustable from 4in to 12in line stretchers•Work on various size blocks from 4” - 12”•2 popular styles to chose from

BL156Snap-Over Line Twigs/Trigs 14/PK

BL348MSN 4-1/4” Tenite Line Blocks

BL210MSN Skate Wheel Joint Raker

“The Original” Hubbard JointerBL280Jointer w/ 1/2”, 5/8”, 3/4”, 7/8” Blades

BL2603/8”x1/2” Brick JointerBL262 5/8”x3/4”BL264 3/4”x7/8”

Cone Shaped Heavy Duty Vinyl Grout BagWL01310-1/2”x24” Large

Finger Tape504-0291”x30 ydGreen

Bonded Braided Nylon LineBC354 - G/BBC352 - W/BBright flourescent ultra strong bonded line. Special bonding process adds extra abrasion & alkali resistance.

Yellow Brick TongsBC380Heavy-duty quick adjustable tong (6-10 bricks)

BL526This red handle utility brush is a must for any professional. Long wearing, white tampico fibers can be used on masonry, brick, tile & stone.

Masonry BrushesJumbo Utility Brush

Polyethylene MortarPanBC49230”x30”

Mortar StandBC293Use on scaffold or ground. made from tubular steel, 30” tall or 19” laying on side.

Brick HammerBL15232oz Brick HammerBL15524oz Brick Hammer

16oz Bricklayer HammerBL255

London Pattern Brick Trowels

• Meticulously hand crafted with a special tool steel• Blades are forged and perfectly heat tempered• The blade, ferrule and tang are bound as one piece

Lufkin Wood Spacing RuleBL167

PARTNERSHIPSA Network Of Select Construction and Indus-trial Supply Distributors and Leading ManufacturersWe are proud to be members of The Evergreen Supply Network. Evergreen is a group of focused industrial and construction distributors serving the United States and Canada that provides you with:• leading products• competitive prices• cutting edge product & application knowledge• superior customer service• highly trained sales professionals

When you work with a member of the Evergreen Supply Network, you are working with a business that is committed to providing you with:• high-quality, name-brand products• exceptional customer service and value-added support• in-depth product and application knowledge

Evergreen members have invested for the long run in their people and their ability to serve you by joining the Evergreen Network.Distributors who are part of Evergreen offer you more than just tools and supplies. They offer you a relationship with a network of the finest construction and industrial distributors and manufacturers across North America.


SEE FOR YOURSELF!

ONE COMPONENT FOAM SEALANTS & ADHESIVES

• Sealandfillsmallgapsandcracks• Straworgunfoamoptionsavailable• Varietyofformulationsandsizestomeet

manyapplicationneeds

• Designedtofillandinsulatelargevoidsandsurfaces

• Availableinavarietyofsizesincludingsmalldisposablekitsfrom12to605boardfootsizesandlargerefillablesystems

• Severalformulationstofitspecificapplicationneeds

LOW PRESSURE SPRAY POLYURETHANE FOAM

SEE FOR YOURSELF!

ONE COMPONENT FOAM SEALANTS & ADHESIVES

• Sealandfillsmallgapsandcracks• Straworgunfoamoptionsavailable• Varietyofformulationsandsizestomeet

manyapplicationneeds

• Designedtofillandinsulatelargevoidsandsurfaces

• Availableinavarietyofsizesincludingsmalldisposablekitsfrom12to605boardfootsizesandlargerefillablesystems

• Severalformulationstofitspecificapplicationneeds

LOW PRESSURE SPRAY POLYURETHANE FOAM

P30101 20oz Expanding Straw FoamP10141 24oz Window/Door Straw FoamP10115 24oz Pro Gun Foam

P10131 24oz Pro Gun Window/Door FormulaP10726 2 Component Spray Foam E-84 205 Board ft. Kit

One & Two Component Foam Sealants & Adhesives• Seal & fill small gaps & cracks• Straw or gun foam options available• Variety of formulations & sizes to meet many application needs

Low Pressure Spray Polyurethane Foam• Designed to fill & insulate large voids & surfaces• Available in a variety of sizes including small disposable kits from 12 to 605 boardfoot sizes & large refillable systems• Several formulations to fit specific application needs

8178Inverted Foam/Concrete Adhesive Formulated for Fiber & Foam Expansions

Adhesives

Loctite Adhesives

Available in Pint & Quart Tubes!

PL200 General Purpose AdhesivePL300 Foam BoardPL400 Subfloor Construction

ADHESIVES


Spray Adhesive

APC79 Spray Aerosol AdhesiveWeb Pattern

Adhesive Solutions

3M™ Scotch-Weld™ HoldFast 70 Cylinder Spray Adhesive creates quick permanent bonds on many substrates, including polystyrene, drainboard, FRP pales, insulation, foams and fabrics. Packaged in pre-pressurized canister for an easy to use, maintenance free delivery system.

Benefits and Features:• Very fast tacking• Unique wide web spray pattern with heavy body and low soak-in• Extremely versatile adhesive, bonds polystyrene without degrading surface

62-4983-8030-2Holdfast 70 Cylinder Spray

62-9880-006-3Holdfast 70 12ft. Hose Assembly

62-9880-8148-5Holdfast 70 Spray Tips

62-9880-9930-5Holdfast 70 Applicator


FASTENERS

Crack Repair

Tapper + Concrete Screw System

Packaged Fasteners

AC100+ Gold

Concrete Block Brick

Power-Stud™Wedge Type Expansion Anchor

Smart Dropin™

Strap-Toggle™Hollow Wall Anchor

Zip-It® & Zip-It® Jr.Wallboard Anchor

P3500 - low velocity, semi-automatic .27 caliber tool

Head Drive Pins Threaded Rods

We Stock & Cut

Threaded Rod

The Power-Stud+ SD1 anchor is fully threaded, torque controlled, wedge expansion anchor which is designed for consistent performance in cracked & uncracked concrete. Suitable base materials include normal-weight concrete, structural sand-lightweight concrete & concrete over metal deck. The anchor is manufactured with a zinc plated carbon steel body & expansion clip. Nut & washer are included.

Fastening Solutions

Wedge-Bolt+®

CPH09KTFlex H20 Crack Repair Kit

ETIPACKKT-Kit


ADHESIVE SYSTEMS

Base Material

Anchor Diameter

Head StyleWorking

Load(Concrete)

Coating / Material Approvals

Similar Anchoring Products

Conc

rete

Ligh

twei

ght C

oncr

ete

Hollo

w C

ore

Plan

k

Gro

ut-fi

lled

Conc

rete

Mas

onry

Hollo

w C

oncr

ete

Mas

onry

Solid

Bre

ak

Hollo

w B

rick

Unre

info

rced

Mas

onry

Stee

l

Dryw

all

Stud

Fini

shed

Hex

Hea

d

Roun

d / A

corn

Nut

Flat

Hea

d (c

ount

ersu

nk)

Mus

hroo

m H

ead

Tie-

Wire

Hea

d

Fem

ale

/ Rod

Cou

pler

Flus

h M

ount

Unde

r 500

lbs.

500

lbs.

to 5

,00

lbs.

Ove

r 5,0

00 lb

s.

Zinc

Pla

ted

Carb

on S

teel

Gal

vani

zed

Stee

l

Type

303

/304

Sta

inle

ss S

teel

Type

316

Sta

inle

ss S

teel

Type

410

Sta

inle

ss S

teel

Zam

ac A

lloy

Perm

a-Se

al C

oate

d

Nylo

n / P

last

ic

Lead

1. ICC-ES2. FM3. UL4. COLA5. Miami-Dade6. NSF 61

PE1000+ 3-to-1 Cartridge - Epoxy Anchor ■ □ □ ■ □ ■ □ □ 3/8” - 1-1/4”

#3 - #10 Rebar ■ ■ ■ ■ ■ ■ ■ ■ 1, 4, 6 Hilti RE 500-SD

AC100+ Gold 10-to-1 Cartridge - Vinylester Anchor ■ □ □ ■ ■ ■ ■ 3/8” - 1-1/4”

#3 - #10 Rebar ■ ■ ■ ■ ■ ■ ■ ■ 1, 4, 6Hilti HY 200/ HY 150 MAXSimpson AT - XPRed Head Epcon A7

Pure110+ 1-to-1 Cartridge - Epoxy Anchor ■ □ □ □ □ □ □ □ 3/8” - 1-1/4”

#3 - #10 Rebar ■ ■ ■ ■ ■ ■ ■ ■ 1, 6Simpson SET-XPRed Head Epcon G5

Pure50+ 1-to-1 Cartridge - Epoxy Anchor ■ □ □ ■ ■ ■ □ □ 3/8” - 1-1/4”

#3 - #8 Rebar ■ ■ ■ ■ ■ ■ ■ ■ 6, 1-PendingHTE 50Simpson SET, ET or EDOTRed Head Epcon C6

T308+ 1-to-1 Cartridge - Epoxy Anchor ■ □ ■ ■ ■ □ ■ 3/8” - 7/8”

#3 - #7 Rebar ■ ■ ■ ■ ■ ■ ■ ■ 6HTE 50Simpson SET, ET or EDOTRed Head Epcon C6

AC50 Silver 10-to-1 Cartridge - Vinylester Anchor ■ □ □ ■ ■ ■ ■ 3/8” - 1”

#3 - #8 Rebar ■ ■ ■ ■ ■ ■ ■ ■ Simpson ATRed Head Epcon A7

Hammer-Capsule Glass Capsule - Hammer Type Anchor ■ □ □ □ 3/8” - 1”

#3 - #8 Rebar ■ ■ ■ ■ ■ ■ ■ ■ Simpson VGC Capsule ITW Chemset Hammer Cpsl.

Chem-Stud Glass Capsule - Spin Type Anchor ■ □ □ □ 3/8” - 1-1/4”

#3 - #10 Rebar ■ ■ ■ ■ ■ ■ ■ ■ ■ Hilti HVU Capsule ITW Maxima 7 Spin Capsule

HEAVY DUTYAtomic+ Undercut Undercut Anchor ■ ■ 5/8” - 1-1/8”

(nom 3/8” - 3/4”) ■ ■ ■ ■ ■ ■ ■ 1 Hilti HDA Undercut

Power-Bolt+ Heavy Duty Sleeve Anchor ■ ■ ■ □ 1/2” - 5/8” ■ ■ ■ ■ ■ 1 Hilti HSL-3

Power-Bolt Heavy Duty Sleeve Anchor ■ ■ □ ■ □ ■ □ 1/4” - 3/4” (CS)

1/4” - 1/2” (SS) ■ ■ ■ ■ ■ ■ ■ 2, 3 Hilti HSL

MEDIUM DUTYPower-Stud+ SD1 Expansion Anchor ■ ■ ■ 1/4” - 1-1/4” ■ ■ ■ ■ ■ ■ 1, 2, 3, 4

Hilti Kwik Bolt 3 (KB3)Simpson Strong-BoltRed Head Trubolt

Power-Stud+ SD2 Expansion Anchor ■ ■ ■ 3/8” - 3/4” ■ ■ ■ ■ ■ 1, 2, 3, 4

Hilti Kwik Bolt TZSimpson Strong-Bolt 2Red Head Trubolt+

Power-Stud+ SD4/SD6 Expansion Anchor ■ ■ ■ 1/4” - 5/8” ■ ■ ■ ■ ■ ■ 1

Hilti Kwik Bolt 3 (KB3)Simpson Strong-BoltRed Head Trubolt

Power-Stud HD5 Expansion Anchor ■ ■ ■ 1/2” - 5/8” ■ ■ ■ ■ ■ Hilti Kwik Bolt 3 (KB3) HDG

Red Head Trubolt

Power-Stud (MG, SS) Expansion Anchor ■ ■ □ 1/2” - 1” (MG)

1/4” - 1” (SS) ■ ■ ■ ■ ■ ■ ■ 2, 3Hilti Kwik Bolt 3 (KB3)Simpson Wedge-All

Lok-Bolt AS Sleeve Anchor ■ ■ □ ■ ■ ■ □ 1/4” - 3/4” (CS)

1/4” - 5/8” (SS) ■ ■ ■ ■ ■ ■ ■ ■ ■Hilti HLCSimpson Sleeve-AllRed Head Dynabolt

Wedge-Bolt+ Screw Anchor ■ ■ □ ■ □ ■ 1/4” - 3/4” (CS)

3/8” - 3/4” (MG) ■ ■ ■ ■ ■ ■ 1, 2, 4Hilti Kwik HUS / HUS-EZSimpson Titen HDRed Head Large Dia. Tapcon (LDT)

Wedge-Bolt (SS) Screw Anchor ■ ■ ■ ■ 1/4” - 1/2” ■ ■ ■ ■ ■ ■ No Similar Product

Snake+ Rod Hanger / Screw Anchor ■ ■ □ □ 1/4” - 1/2” ■ ■ ■ ■ 1, 2, 4 No Similar Product

Vertigo+ (Concrete) Rod Hanger / Screw Anchor ■ ■ 1/4” - 1/2” ■ ■ ■ ■ 1, 2

Simpson Titen HD Rod Hanger Hilti HUS-EZ I

Vertigo (Steel / Wood) Rod Hanger / Screw Anchor ■ ■ ■ ■ 1/4” - 1/2” ■ ■ ■ ■ 2, 3 ITW Sammy

Bang-It / Wood-Knocker Speciality Cast-In-Place ■ ■ 1/4” - 3/4” ■ ■ ■ ■ ■ ■ 2, 3

Hilti HCI-WF / HCI-MDSimpson Blue Banger

Smart DI+ Dropin Anchor ■ □ 1/4” - 3/4” ■ ■ ■ ■ 2, 3

Hilti HDI Drop-InRed Head RL Drop-In

Steel Dropin Dropin Anchor ■ ■ 1/4” - 3/4” ■ ■ ■ ■ ■ ■ 2, 3

Hilti HDI Drop-InRed Head RL Drop-In

Mini Dropin Dropin Anchor ■ ■ ■ □ 1/4” - 1/2” ■ ■ ■ ■ 2

Hilti HDI-P Short Drop-InRed Head RX Drop-In

Hollow- Set Dropin Dropin Anchor ■ ■ ■ ■ ■ ■ □ 1/4” - 5/8” ■ ■ ■ ■ ■ ■ 2, 3 No Similar Product

Double Bolt/Shield Anchors ■ ■ ■ ■ ■ 1/4” - 3/4” ■ ■ ■ ■

Single Bolt/Shield Anchors ■ □ □ □ 1/4” - 5/8” ■ ■ ■

LIGHT DUTYTapper+ Screw Anchor ■ ■ ■ ■ ■ ■ □ 3/16” - 5/16” ■ ■ ■ ■ ■ 1, 5

Hilti Kwik-Con IISimpson Titen / Titen HD Redhead Tapcon

Tapper (SS) Screw Anchor ■ ■ ■ ■ 3/16” - 1/4” ■ ■ ■ ■ ■ 5Hilti Kwik-Con IISimpson TitenITW Tapcon

Safe-T+Pin Pin / Nail Anchors ■ ■ ■ ■ 8mm ■ ■ 1 No Similar Product

Spike Pin / Nail Anchors ■ ■ ■ □ 3/16” - 1/2” (CS)3/16” - 3/8” (SS) ■ ■ ■ ■ ■ 2

Simpson CrimpRed Head Redi-Drive

Drive Pin / Nail Anchors ■ □ □ □ 3/16” - 1/2” ■ ■ ■ ■ ■ 3 Simpson MSD/CSD/DSD

Zamac Hammer ScrewPin / Nail Anchor ■ □ □ ■ ■ ■ □ 3/16” - 1/4” ■ ■ ■ ■ ■ No Similar Product

Zamac or Nylon Nailin Pin / Nail Anchors ■ □ □ ■ ■ ■ □ 3/16” - 1/4” ■ ■ ■ ■ ■ ■ ■Calk-In Bolt/Shield Anchors ■ □ ■ □ ■ #8-32 - 1/2” ■ ■ ■ ■ ■Toggle-Bolt Hollow Walll Anchor □ ■ ■ 1/8” - 1/2” ■ ■ ■ ■ ■ ■Strap-Toggle Hollow Walll Anchor □ ■ ■ 3/16” - 1/2” ■ ■ ■ ■ Hilti HTB Toggler Bolt

Zamac or Nylon Zip-It Drywall Anchor ■ ■ #10, 6, 8 Screw ■ ■ ■ ■ ITW EZ

Wall Dog Drywall Anchor ■ ■ ■ ■ ■ ■ ■ 3/16” ■ ■ ■ ■ No Similar Product

■: Suitable □: May Be Suitable Indicates a Code Listed Product Simpson is a registered trademark of Simpson Strong-Tie Company, Inc Hilti is a registered trademark of Hilti Corp. ITW and Redhead are registered trademarks of Illinois Tool Works, Inc

For technical support please contact a Powers Product & Code Expert at 914-235-6300 of visit our website at www.Powers.comVerify scope of approval relative to intended application. The information and data contained within this document is current as of October 1, 2013 and is subject to change after such date. Powers Fasteners, Inc. reserves the right to change the designs, materials and specifi cations of the products in this document without notice and shall have no liability with respect to such changes. Please contact Powers Fasteners for the most current and up to date information and data or refer to our website at www.powers.com

Powers USA: (800) 524-3244 or (914) 235-6300 Canada: (905) 673-7295

Anchor Selection Chart

Powers Fasteners, Inc.

Epoxy Guns & Accessories

EVERYDAY SUPPLIES

Multi-Purpose

10000 WD40 Trigger Sprayer for Bulk Product10152 WD40 11oz Aerosol Spray w/ Smart Straw287995 WD40 1 Gallon Unit

01912 EN22 Industrial 9V Battery01919 EN91 Industrial AA Battery01920 EN92 Industrial AAA Battery01921 EN93 Industrial C Battery01922 EN95 Industrial D Battery05543 Duracell Industrial 6V Battery

Batteries

• Clear molded plugs with power-indicator light in female end

• Reinforced blades help prevent accidental bending or breaking

• UL listed / CSA Certified / Meets OSHA requirements for outdoor use

• Other color combinations available!

025490052 12/3 100’ Green/Yellow025490077 12/3 100’ Pink/Green02548USA1 12/3 50’ Red/White/Blue025449USA1 12/3 100’ Red/White/Blue

07775 Coleman Cable Luma-Site™ Halogen Lighting07880 500W Replacement Halogen Bulbs07776 1000 Watt Dual Head Light w/ Tripod Stand

Outdoor Extension Cords

Flashlights & Headlights

TUF2AAPE• Flashlight LED 2AA w/

Battery Pouch

TUF2DPE• Flashlight 2D LED

w/BAT

TUF4D1E• Hardcase 4D Lantern w/

BAT

TUFHD31PE• Head Light 4LED Tufcase

515• 20:1 Thrust Ration• Built-in Static Mixer Cutter• Cartridge Retaining Bars

750-XSP• 26:1 Thrust Ration• Extra Durable Heated Treated Piston Rod• Side by Side Epoxy Applicator

250• 18:1 Thrust Ration • 1/10 Gallon Industrial Smooth Rod Caulking Gun w/ Revolving Barrel• Zinc Alloy Handle

215 Quart Rachet Caulk Gun624 Bulk Gun

Nylon Lifting Slings

EE2-802-10 2”X10’ Nylon SlingEE2-802-12 2”X12’ Nylon SlingEE2-802-14 2”X14’ Nylon SlingEE2-802-16 2”X16’ Nylon SlingEE2-802-20 2”x20’ Nylon SlingEE2-802-6 2”x6’ Nylon Sling

A-Slick-1• Caulking Tool Finishing Set-Includes 3” Tapered & 3”,4”,8” Straight Stainless “Spatula” Style Blades

SPT-3PT• Offset Spatula Finishing Tool - 3” Long & 1/2” Wide

PC-58 (Green)PC-620 (Yellow)• Plastic Tapered Nosecones

02832• 12/3 2ft. SJTW Right Angle GFCI w/ Tri-Source

07765• 500W Heavy Duty Hand-Held Halogen

02589• 12/3 SJTW Yellow Vinyl Extension Cord w/ Lighted End

02588• 12/3 SJTW Yellow Vinyl Extension Cord w/ Lighted End

05984 & 05985• 15A/125V NEMA 5-15 Yellow Vinyl Male Plug & Female Connector


Get to know Jobsite Supply

- Community Involvement -

Jobsite Supply proudly supports Anna’s Celebration of Life Foundation.

Helping kids with special needs receive the therapy devices they need to thrive.

For more information, visit annascelebrationoflife.org.


Customer Sales& Rental Group

317-684-7474800-874-7415

Fax: 317-684-7484www.jobsitesupply.com

Customer Account ManagersForming & Shoring

Scott HallCell: 317.281.6377

[email protected]

Decorative Concrete & Restoration SpecialistRyan McCreery

Cell: [email protected]

Concrete Slab SpecialistMike Kamm


Safety SpecialistTrevor Osborn


INDOT SpecialistBuck Quigley


Industrial Supplies & Fastening SpecialistDon Toon


Senior Customer Support Team MemberJerry Becher


Customer Support Team MembersRyan Hall

[email protected]

Sean [email protected]

Kevin [email protected]

Jon Quearry Cell: 317.710.8982

[email protected]

Tim Waddell Cell: 317.710.1049

[email protected]

Customer Sales ManagerPete Molloy


Customer ServiceReception

Courtni [email protected]

Customer EquipmentRental & Service Associate

Tony WeiskeCell: 317.514.9794

[email protected]

Customer ServiceMechanic

Chuck Burris Cell: 317.710.5572

Customer Purchasing ManagerBrian Myers


Customer Support Team LeaderMylissa McCoy


jobsite np final revised 2014

Documents