jelongresume 102014
TRANSCRIPT
Jennifer Erin Long35 Roving Hills Circle, Cartersville, GA 30121
(619)997-2635 Cell(770)382-5715 Home
Etruria Nova Onlus University, Policastro Bussintino, Italy – Sept 2014Title: International Volunteer
Remove soil and artifacts from archeology excavation site Clean and catalog pottery artifacts Perform survey of excavation site topography Work with a team of archeologists to excavate and evaluate Roman and Medieval site for artifact findings
Finca Bellavista Tree House Community, La Florida, Costa Rica – Jun – Aug 2014Title: International Volunteer
Responsible for attending daily meetings for coordination of community activities Provided care for chickens, including feeding, collection of eggs, cleaning of chicken coop Assisted in kitchen activities, including cleaning of kitchen area, washing dishes, assisted with cooking Assisted with stocking of provisions Escorted Community guests to tree houses and hiking excursions Bartended with limited bar supplies (liquor and beer) Entertain and converse with guests during happy hour Provide guests with information about the area for travel reasons
BD Biosciences, San Diego, CA – Jan 2013 – May 2014Title: Instrumentation Technician II
Responsible for receiving, installing, validating, calibrating new and existing laboratory instruments Write Work Instructions, SOP’s, Preventative Maintenance Work Plan Templates Create Master Equipment Files, work orders, MDT’s in BMRAM Perform Second Level Review for work orders and Master Equipment files Coordinate with contractors and vendors for repairs, modifications, installation, validation of instruments Provide training for instrumentation installation, calibration, and validation Experience with validation of spectrophotometers and software protocol development Validation of environmental chambers using Agilent and thermocouple temperature mapping Member of Equipment Council to provide insight for new equipment purchases and to improve current
equipment calibration and validation processes
Genentech, Inc., Oceanside, CA – Jan 2009 – Jan 2013Title: Senior Instrument Technician
Responsible for the maintenance and calibration of all instrumentation and control system equipment within the Oceanside facility including pressure, flow, temperature, pH/conductivity, optical densitiy, humidity, gas detection
Evaluate system and associated subsystem operation, performance and documentation requirements, identify specific process improvement needs and provide recommendations or implement system upgrades or improvements
Coordinate contractor personnel who perform repairs, modifications, and installation of instrumentation, control systems, and associated equipment
Perform analysis and troubleshooting of industrial process control instrumentation Perform instrument calibrations in accordance with standard operating procedures Prepare and organize technical documentation and operational procedures. Conduct work in a highly
regulated environment Work with Delta V, SAP, and CalMan software programs Perform Second Level Review on completed work orders Submit Maintain to Improve projects to Engineering Perform monthly safety walkthroughs and evaluate job activities for safety levels
Bioserv/NextPharma, San Diego, CA – March 2008 – Nov 2008Title: Validation Analyst
Review and approve certificates of calibration from contracted vendors
Page 1 of 3
Provide counsel to QA and Manufacturing for calibration issues and best practices and equipment handling
Review and approve EM charts Submit and complete changes to SOPs and calibration information to improve company practices Verify calibrated assets follow FDA, ISO 13485, and company requirements Obtain daily water samples for USP Purified Water, Water for Injection, and Clean Steam Trained for Class 5 – 8 Cleanroom gowning procedures Review and approve Certificates of Analysis for water results Created and maintain data base for water sample result trending using Windows Excel 2003 Write monthly and quarterly reports for water result trends using Microsoft Word 2003 Proofread Validation Protocols
Davis Inotek Calibration, Baltimore, MD and El Cajon, CA – April 2006 – Jan 2008Title: Calibration Technician
Calibrated over 28,000 pieces of equipment IAW ISO 9000 and ISO 17025 Prepared and participated in successful ISO 9000 and ISO 17025 audit for El Cajon lab Calibrated in areas of pressure, air flow, vacuum, torque, temperature, balances physical/dimensional,
basic electrical, force, mass (Class 4 – 6), chemical (pH and conductivity), and volume (graduated cylinders and burettes),
Completed and maintained certificates using Indy Soft Gage Insite based program Provided training for El Cajon Lab for calibration certificates and Gage Insite use Performed calibrations in Davis lab and/or on customer site Follow procedures written by GIDEP/PMEL (military), manufacturer, or customer Use internet for equipment research
Guidant Cardiovascular Labs, Temecula, CA (Currently Abbott Vascular) - May 2005 – April 2006Title: Calibration Technician
Calibrate equipment IAW ISO 9000 and FDA regulations following company LOP, SOP, DOP, and cGMP Completed and maintained handwritten calibration certificates Wrote, proofread and edited company procedures Performed calibrations in Class 10 Cleanroom environment Worked with engineers to improve calibration and manufacture practices Calibrated in areas of pressure, flow, vacuum, temperature, physical/dimensional, force, basic electrical Provided training for calibration, LOP, and SOP and calibration certificates Experienced with handling of hazardous chemicals
United States Postal Service, San Diego, CA – May 2003 – Jan 2005Title: Letter Carrier
Deliver mail to customers in the City of San Diego in accordance with Federal Law Provided training to new mail carriers
United States Navy – May 1997 – May 2002Title: Gunner’s Mate Second Class (SW), E-5
Performed testing, repairs, maintenance, and troubleshooting on electro/mechanical, hydraulic, and pneumatic systems on gun mount robotic systems
Followed military procedures, diagrams and schematics Work center supervisor of maintaining over $14.5 million in government assets Provided training in areas of maintenance and physical security Experienced in handling of hazardous chemicals and explosives Completed and maintained maintenance records and ammunition records
Formal Education
AA Electronics Engineering, ITT Technical Institute, San Diego, CA 6 months Microsoft Office, Coastline Community College, Fountain Valley, CA Graduate of Cass High School, Cartersville, GA
Formal Training
10 months Gunner’s Mate “A” and “C” schools studying electronics, hydraulics, pneumatics, special tools, troubleshooting, repair, and schematics of automatic gun mounts.
Page 2 of 3
6 weeks Gunner’s Mate Advanced “C” school studying calibration of syncro and servo units, soldering circuit boards.
Delta V Hardware and Troubleshooting Course 7018, Austin, TX. Brooks Mass Flow Controller Configuration, Genentech, Inc., Oceanside, CA
Awards
Navy and Marine Corp. Achievement Medal – United States Navy - for demonstrating initiative, determination, and devotion for service and security.
Navy and Marine Corp. Achievement Medal – United States Navy - for providing training on electronics and operation of 25mm gun mount systems.
Good Conduct Ribbon - Unites States Navy. Navy Unit Commendation for meritorious service and efforts to repair and operate electro-hydraulic gun
mount systems. 4 Letters of Commendation – United States Navy - for professionalism, knowledge, leadership, and
security. Letter of Recommendation – Guidant Cardiovascular Labs
References
BD BiosciencesOmar Richards, Supervisor, 619-954-9048Tiarra Hatcher, Coordinator, 619-288-6868Luis Carmona, Instrumentation Technician I, 619-886-1384
Genentech, Inc.Michael Gron, Master Instrumentation Technician, 760-421-1565 Ray Gomez, Senior Instrumentation Technician, 858-525-3906Anthony Bettencourt, UGL Contract Services, Calibration Technician, 760-828-0231
Bioserv/NextPharma, San Diego, CAClaudia Valles, QA Analyst 858-450-3123
Davis Inotek LabsJames Olesky, Calibration Technician, San Diego, CA 530-301-9827
Laura Linz, Human Resources, Baltimore, MD 410-398-3900
Guidant Cardiovascular Labs (Currently Abbott Vascular), Temecula, CA Charles Wathen, Lab Manager, 951-914-2400
Alan Happ, Assistant Lab Manager, 951-914-2400 Gus Corrales, Lead Calibration Technician, 951-914-2400
Page 3 of 3