jacobean - newport brass · page 2 of 2 spec_ product dimensions (units are in inches) ©2012...
TRANSCRIPT
page 1 of 2 spec_
Product Specification: Add "Color / Finish" suffix to Model number, below.
Colors / Finishes• 10B: Oil Rubbed Bronze• 15: Polished Nickel• 15S: Satin Nickel• 26: Polished Chrome
• Other: Refer to the Newport Brass catalog foradditional color/finish options.
2470-5623
Features Solid brass construction
Quarter-turn washerless ceramic disc valve cartridge
ADA compliant traditional cold lever handle
Spout assembly with integral supply hoses
6-5/8" (16.8 cm) spout height at outlet
4-3/4" (12.1 cm) spout reach (c-c)
1.5 gallons (5.7 liters) per minute maximum flow rate
For single hole configurations
Codes / Standards ComplianceMeets or exceeds the following at date of manufacture:
ASME A112.18.1/CSA B125.1
IAPMO/cUPC
IPC
NSF 61
ADA
Energy Policy Act of 1992
All applicable US Federal and State material regulations
Specified Model
Model Description Colors / Finishes2470-5623 Cold Water Dispenser Faucet 15 15S 26 10B Other
6-xxx 15 15S 26 10B Other
* Note: The use of an air gap is required for dispenser faucets drawing from a reverse osmosis filtration system. The Integrated Air GapBase (6-xxx) affords the functionality of a separate air gap within the design of the product as depicted. Failure to specify the Integrated Air Gap Base (6-xxx) will result in a product constructed using the standard base (no internal air gap).
©2012 Brasstech, Inc.
t: 949.417.5207 | www.newportbrass.com
2470-5623
JACOBEANCold Water Dispenser Faucet
The Cold Water Dispenser Faucet shall be made of solid brass construction. Faucet shall incorporate a spout assembly with integral supply hoses and feature a quarter-turn washerless ceramic disc valve cartridge. Faucet shall incorporate an ADA compliant contemporary cold lever handle. Cold Water Dispenser Faucet shall have a 1.5 gallons (5.7 liters) per minute maximum flow rate and accommodate single hole configurations. Product shall incorporate a 6-5/8" (16.8 cm) spout height at outlet and a 4-3/4" (12.1 cm) spout reach (c-c). Cold Water Dispenser Faucet shall be Newport Brass Model 2470-5623/____ . [Integrated Air Gap Base shall be Newport Brass Model 6-xxx].
Solid brass construction
Quarter-turn washerless ceramic disc valve cartridge
6-5/8" (16.8 cm) spout height at outlet
ADA compliant traditional cold lever handle
4-3/4" (12.1 cm) spout reach (c-c)
For single hole configurations
Spout assembly with integral supply hoses
1.5 gallons (5.7 liters) per minute maximum flow rate
Page 1 of 2 Spec_2470-5623_c_6/15 t: 949.417.5207 l www.newportbrass.com©2015 Brasstech, Inc.
15S10B 2615
15S10B 26156-290 Intergrated Air Gap Base**
**The use of an air gap is required for dispenser faucets drawing from a reverse osmosis fi ltration system. The Integrated Air Gap Base (6-290) affords the functionality of a separate air gap within the design of the product as depicted. Failure to specify the Integrated Air Gap Base (6-290) will result in a product constructed using the standard base (no internal air gap).
Features• Solid brass construction
• Quarter-turn washerless ceramic disc valve cartridge
• ADA compliant traditional cold lever handle
• Spout assembly with integral supply hoses
• 6-5/8” (16.8 cm) spout height at outlet
• 4-3/4” (12.1 cm) spout reach (c-c)
• 1 gallons (3.6 liters) per minute maximum fl ow rate*
• For single hole confi gurations
*A Water Dispenser fl ow rate of approximately 1 gpm or less is typical but will vary depending on installation specifi c factors including in-line water pressure and water fi ltration system.
page 1 of 2 spec_
Product Specification: Add "Color / Finish" suffix to Model number, below.
Colors / Finishes• 10B: Oil Rubbed Bronze• 15: Polished Nickel• 15S: Satin Nickel• 26: Polished Chrome
• Other: Refer to the Newport Brass catalog for additional color/finish options.
2470-5623
FeaturesSolid brass construction
Quarter-turn washerless ceramic disc valve cartridge
ADA compliant traditional cold lever handle
Spout assembly with integral supply hoses
6-5/8" (16.8 cm) spout height at outlet
4-3/4" (12.1 cm) spout reach (c-c)
1.5 gallons (5.7 liters) per minute maximum flow rate
For single hole configurations
Codes / Standards ComplianceMeets or exceeds the following at date of manufacture:
ASME A112.18.1/CSA B125.1
IAPMO/cUPC
IPC
NSF 61
ADA
Energy Policy Act of 1992
All applicable US Federal and State material regulations
Specified Model
Model Description Colors / Finishes2470-5623 Cold Water Dispenser Faucet 15 15S 26 10B Other
6-xxx Integrated Air Gap Base * 15 15S 26 10B Other
* Note: The use of an air gap is required for dispenser faucets drawing from a reverse osmosis filtration system. The Integrated Air Gap Base (6-xxx) affords the functionality of a separate air gap within the design of the product as depicted. Failure to specify the Integrated Air Gap Base (6-xxx) will result in a product constructed using the standard base (no internal air gap).
©2012 Brasstech, Inc.
t: 949.417.5207 | www.newportbrass.com
2470-5623
JACOBEANCold Water Dispenser Faucet
The Cold Water Dispenser Faucet shall be made of solid brass construction. Faucet shall incorporate a spout assembly with integral supply hoses and feature a quarter-turn washerless ceramic disc valve cartridge. Faucet shall incorporate an ADA compliant contemporary cold lever handle. Cold Water Dispenser Faucet shall have a 1.5 gallons (5.7 liters) per minute maximum flow rate and accommodate single hole configurations. Product shall incorporate a 6-5/8" (16.8 cm) spout height at outlet and a 4-3/4" (12.1 cm) spout reach (c-c). Cold Water Dispenser Faucet shall be Newport Brass Model 2470-5623/____ . [Integrated Air Gap Base shall be Newport Brass Model 6-xxx].
ASME A112.18.1/CSA B125.1
IAPMO/cUPC
ADA
IPC
Energy Policy Act of 1992
NSF 61
All applicable US Federal and State material regulations All applicable US Federal and State material regulations
The Cold Water Dispenser Faucet shall be made of solid brass construction. Faucet shall incorporate a spout assembly with integral supply hoses and feature a quarter-turn washerless ceramic disc valve cartridge. Faucet shall incorporate an ADA compliant contemporary cold lever handle. Cold Water Dispenser Faucet shall have a 1 gallon (3.6 liters) per minute maximum fl ow rate and accommodate single hole confi gurations. Product shall incorporate a 6-5/8” (16.8 cm) spout height at outlet and a 4-3/4” (12.1 cm) spout reach (c-c). Cold Water Dispenser Faucet shall be Newport Brass Model 2470-5623/____. [Integrated Air Gap Base shall be Newport Brass Model 6-290].