ives residential hardware pdfs/2016/ives.pdfives residential hardware distributed by hsi. table of...

IVES RESIDENTIAL HARDWAREDistributed by HSI

TABLE OF CONTENTSfinishes 1

hinges/pivots 2-4

architectural door trim 4-5

flush bolts & coordinators 6-9 latches, catches, and door guards 10-13

stops 14-22

strikes & bars 23

exterior door hardware 24-25 hooks & brackets 26-27

window hardware 28

cabinet/closet knobs & pulls 29-31

[email protected] 1Large Quantity Orders Available. Call or Email HSI for Price Quote.

key to base materials & processing

ives material symbol material process

a Aluminum Burnished

ma, pa Aluminum Polished

b, mb Brass or Bronze Polished

bb Brass or Bronze Burnished

f Iron or Steel Burnished

p Plastic N/A

r Rubber N/A

s Stainless Steel Polished

z Zinc Burnished

key to finishesdescription of finishes finish # ansi/bhma*

Almond Epoxy Coated Aluminum A N/A

Aluminum, Prime Painted AP N/A

Steel, Prime Painted FP 600

Black Epoxy Coated BLK N/A

Plastic P N/A

Rubber R N/A

White Epoxy Coated W N/A

Zinc Plated 2C 603

Bright Brass, Clear Coated 3 605

Satin Brass 5 609

Satin Bronze, Clear Coated 10 612

Dark Oxidized Satin Bronze, Oil Rubbed 10B 613

Bright Nickel Plated, Clear Coated 15 619

Satin Nickel Platedm Clear Coated 15 619

Satin Nickel Plated, Blackened 15A 620

Flat Black Coated 19 622

Polished Chrome Plated 26 625

Satin Aluminum, Clear Anodized 28 628

Dark Bronze Painted 69 690

Aluminum, Clear Coated 92 673

Matte Black 406 N/A

Bright Brass, Lifetime Finish 505 N/A

Aged Bronze, Steel 716 N/A

Aged Bronze, Brass 716E N/A

FINISHES

800-334-56252Large Quantity Orders Available. Call or Email HSI for Price Quote.

1011 700

1000 Series Residential HingesFull mortise hinges in 3 sizes: 3”, 3-1/2” and 4”.

Two corner options: Square corner and 5/8” radius corners.Made from solid brass and stainless steel.

Full Mortise Pin and Barrel Continuous HingeFor Doors Weighing up to 600 pounds

• Non Handed• 1/8” Inset

• 48” Maximum Door Width• Non Handed

• Bevel or Square Edge Door

Brass Finishes: B505, B605, B613, B619, B620, B625, B716Steel Finishes: F622E, F716E

Must specify length: 83”, 85”, 95”

Finishes: 32D

HINGES

112HD 224HD

Full Mortise Aluminum Geared Continuous Hinge• Non Handed

• Flush Mounted, No Inset• 48” Maximum Door Width

• Beveled or Square Edge DoorsFor Doors Weighing up to 450 pounds without reinforcing,

600 pounds with reinforcing

Full Mortise Aluminum Geared Continuous Hinge• Handing required when modified

• Door Edge Protector• 48” Maximum Door Width

• 1/16” Door Inset

Must specify length: 85”, 95” Must specify length: 85”, 95”

Finishes: 313AN, US28 Finishes: US28


HINGES

3CB1 3PB1

3 Knuckle, Concealed Bearing Full Mortise Hinge• For standard weight doors• Medium frequency usage

• Packed with wood and metal screws

3 Knuckle, Plain Bearing Full Mortise Hinge• For standard weight doors

• Low frequency usage• Packed with wood and metal screws

Specify Size (Inches):4.5 x 4

4.5 x 4.55 x 4.5

Size (Inches):4.5 x 4.5

Finishes: 630, 643, 652, 600, 651, 652, 613, 626 Finishes: 652

5BB1 5PB1

5 Knuckle, Ball Bearing Full Mortise Hinge• For standard weight doors• Medium frequency usage

• 2 ball bearing• Packed with wood and metal screws

5 Knuckle, Plain Bearing Full Mortise Hinge• For standard weight doors

• Low frequency usage• Packed with wood and metal screws

Specify Size (Inches):4.5 x 4

4.5 x 4.55 x 4.5

Size (Inches):4.5 x 4.5

Finishes: 600, 633, 652, 613, 630, 632, 651, 652, 643 Finishes: 652, 632


91105F• Non-handed

• All stainless steel construction.• Allows door to open a full 90 (* degree mark)

• Full mortise• 90 pound load bearing

• Use two for doors up to 7’0” and over 7’0” use three.

Finishes: 32D

POCKET PIVOT/HINGE

8200 8302 8303 8305

Push Plate Pull Plate Pull Plate Pull Plate

Specify Size (Inches):3.5 x 15 4 x 16

Specify Size (Inches):3.5 x 15 4 x 16

Size (Inches):4 x 16

Size (Inches):3.5 x 15

Finishes: 26D, 32D, US15, US28 Finishes: 32D Finishes: 32D Finishes: 26D

ARCHITECTURAL DOOR TRIM - PUSH PLATE/PULL PLATES

PIVOTSDOOR TRIM

&


VR900 RHR/ VR900 LHR VR910-DT VR910-NL

* With black gripFor use with most mortise locks on

outswinging doors including• Schlage L9000 Series with interior L or N

escutcheon, and rose trim.• Includes built-in lock protector and

cylinder cutout.

* With black gripFor use with Von Duprin 98/99 Series rim

and vertical rod exit device• Non-handed

• Thru-bolts direct to the exit device• Pull operation only.

* With black gripFor use with Von Duprin 98/99 rim and

vertical rod exit device• Non-handed

• Thru-bolts direct to the exit device

Finishes: 32D Finishes: 32D Finishes: 32D

ARCHITECTURAL DOOR TRIM - DOOR PROTECTION PLATES

8400Door protection plates are available in .050” thick brass, stainless steel or aluminum; and 1/8” thick high impact polyethylene in clear or black.

• Bevel edge options; specify B4E for all four edges.• Mounting screw pack furnished standard, 16 screws per pack.

Finish Sizes

B605 12 x 34, 12 x 46, 6 x 34

B613 6 x 34

B628 8 x 40

B630 10 x 29, 10 x 34, 10 x 35, 10 x 36, 10 x 41, 10 x 43, 10 x 47, 6 x 34, 6 x 30, 8 x 30, 8 x 34

PA28 6 x 34

PA628 8 x 40

B619 6 x 30, 8 X 34

PA3 6 X 30, 6 X 34, 8 X 34

PA716 8 X 34

VANDAL RESISTANT TRIM

DOOR TRIM


261 262 265

An exceptionally smooth working flush bolt with sharp, crisp lines. Double action spring design provides automatic holding of brass bolt in projected or retracted position, and

assures ease of operation in conjunction with deep cup finger hole. Made from polished

cast brass.

An exceptionally smooth working flush bolt with sharp, crisp lines. Double action spring design provides automatic holding of brass bolt in projected or retracted position, and

assures ease of operation in conjunction with deep cup finger hole. Made from polished

cast brass.

A compact flush bolt designed specifically for easy, low cost installation. Rounded faceplate

and lip for simplified installation. Double action spring design provides automatic

holding of brass bolt in projected or retracted position, and assures ease of operation in

conjunction with deep cup finger hole. Made from polished cast brass.

Brass Finishes: B3, B5, B10B, B15, B26D Brass Finishes: B3, B5, B10B, B15, B26, B26D Brass Finishes: B10B, B15, B3, B26D

FLUSH BOLTS

FB31P FB32

Top and Bottom Bolts (Pair)Fully Automatic—inactive door is latched, bolts are extended when

active door closes, door is unlatched, bolts retract when active dooris opened. Low Actuation Forces—Top Bolt Has No Spring Tension.Fits standard ANSI A115.4 Door Frame Preparations. Non-handed.

Top Bolt with Auxiliary Fire LatchFB32 Model with Auxiliary Fire Latch eliminates the bottom bolt

and is UL Listed for Fire Doors.

Finishes: 10B, 3, 32D Finishes: 32D

Top Bolt Top BoltAuxiliary

Fire Latch

Bottom Bolt

FLUSHBOLTS


FB358 FB41P FB42

Top or Bottom BoltsWhen the active door is opened, the lever can be moved to the ‘up’ position, retracting the

bolt and allowing the inactive leaf to beopened. When the inactive leaf is closed, the lever can be moved to the ‘down’ position,

projecting the bolt into the strike and securelylocking the inactive leaf.

Top and Bottom Bolts (Pair)Fully Automatic—inactive door is latched,

bolts are extended whenactive door

Top Bolt with Auxiliary Fire LatchFB42 Model with Auxiliary Fire Latch

eliminates the bottom bolt and is UL Listed for Fire Doors.

Finishes: 10B, 3, 26D Finishes: 3, 10, 10B, 32, 32D Finishes: 32D

FB457-12 FB458-12 FB51P FB61P

Top or Bottom BoltsStandard Rod Length is 12”, which is measured from the centerof the

flush bolt body to the bolt tip.

Top or Bottom BoltsStandard Rod Length is 12”, which is measured from the centerof the

flush bolt body to the bolt tip.

Top and Bottom Bolts (Pair)Standard Rod Length is 12”, which

is measured from the center of the flush bolt body to the bolt tip.

Top and Bottom Bolts (Pair)Constant Latching—inactive door remains latched until the active door is opened, releasing the automatic bottom bolt and

then the top bolt can be manually released.

Finishes: 10B, 3, 26, 26D Finishes: 3, 10, 10B, 15, 26, 26D Finishes: 3, 10B, 32D Finishes: 10B, 32D

FLUSHBOLTS


COR

The COR Series Coordinators are designed for use on pairs of doorswhen one door needs to close before the other. All COR units function easily. The active door lever, located nearest to the active stop, holds the active door open until the trigger mechanism is released by the

closing of the inactive leaf. All COR units may not function correctly with swingclear hinges. All COR units are equipped with an adjustable override feature which allows the active door to close under extreme

pressure. All COR units are compatible with Flush Bolts. The COR Series is available in five sizes for variable door opening widths. The COR Series does not cover the entire length of the stop, so a FL filler

bar can be provided to maintain architecturally clean lines.

Finishes: US3, US26D, US28, 315AN, US10, US10B

For Openings Where Doors Are Same Size

Coordinator Length of For Opening CommonNumber Channel Widths Applications

COR32 32" 34" - 52" Pair of 2'0" DoorsCOR42 42" 52" - 72" Pair of 2'6" DoorsCOR52 52" 62" - 92" Pair of 3'0" DoorsCOR60 60" 70" - 108" Pair of 3'6" DoorsCOR72 72" 84" - 132" Pair of 4'0" Doors

SERIES BAR COORDINATORS

40 253

Concealed screw design enhances appearance and security.Exceptional strength and durability provided by interlocking

construction of heavy gauge track and rod. Permanent stop prevents rod disengagement from track. Tension spring holds bolt in desired position. Track assures smooth operation and interlocks with side edges of rod to eliminate marring. Decorative 5/8” diameter knob

designed to facilitate bolt operation.

Heavy duty, decorative bolt ideal where extra strength required. Decorative 1-1/4” diameter knob fits well with any decor and designed

to facilitate bolt operation. Made from solid brass.

3” Brass Finishes: B3, B10B, B15, B26, B26D4” Brass Finishes: B3, B10B, B15, B26, B26D

6” Brass Finishes: B3, B5, B10B, B15, B26, B26D

8” Brass Finishes: B3, B10B, B26D12” Brass Finishes: B10B, B26D, B3

Specify Strike: Mortise Strike (MS), Rim Strike (RS), or Surface Strike (SS).

DECORATIVE SURFACE BOLTS

COORDINATORSBOLTS

&


360 453

Surface Bolt has 1-1/4” throw for maximum security. Jimmy-resistant design, bolt locks automatically when thrown,

can be released only be pressing knob toward door while retracting. Ideal for all types of doors.

Surface Bolt has 1-3/16” throw for maximum security. Strong tension springs prevent creep. Ideal for all types of doors.

Available 8” & 12” lengths. Units packed with standard screws

Finishes: US2C Finishes: US10, US26D, US2C

DECORATIVE SURFACE BOLTS

DUTCH DOOR BOLTS

054

Practical, rugged, attractive bolt for application on dutch doors as well as other areas. Chamfered rod end draws the two leaves of door tightly together. Sufficient tolerance provided in strike opening to allow for misalignment of door leaves and also prevents binding of bolt.

Made from solid brass.

Brass Finishes: MB3, MB10B, MB15, MB26, MB26D

BOLTS


330 335 336

Independent rollers allow positive action and self-alignment. Cushioned rollers absorb shock and noise, hold door away from

cabinet. Made from wrought steel.

Smooth, positive latching action insured by powerful conical spring. Durable nylon roller insures quiet operation. Adjustable tension. Full lip style strike designed for simplified mortising. Made from wrought brass or

wrought steel.

Smooth, positive latching action insured by powerful conical spring. Durable nylon roller insures quiet operation. Adjustable tension. Standard box type strike designed for neat appearance. Made from wrought brass or

wrought steel.

Steel Finishes: F2C Brass Finishes: B3, B5, B10B, B15, B26, B26D

Brass Finishes: B3, B15, B26

RL1152 RL30 RL36 RL36

Combination of RL30 Roller Latch and Angle Stop.

Actuation is simple, closing of the door causes the roller tofall in the depression of the

strike, thereby holding the door closed.

Actuation is simple, closing of the door causes the roller

to fall in the depression of the strike, thereby holding the door closed. The projection of the roller is easily adjusted using

adjusting screws on the face of the unit.

Actuation is simple, closing of the door causes the roller to fallin the depression of the strike,

thereby holding the door closed. The projection of the

roller is easily adjusted by turning knurled knob on back

of latch.

Actuation is simple, closing of the door causes the roller to fall in the depression of

the strike, thereby holding the door closed. The projection of the roller is easily adjusted by turning slotted screw on back

of latch.

Finishes: 26D Finishes: 26D Finishes: 26D Finishes: 32D

ROLLER CATCHES

ROLLERCATCHES


481

Chain Door Guard permits the door to be slightly opened to allow viewing. Narrow chain holder maintains chain in stationary position when door guard is not in use, eliminating marring of door and frame caused by dangling chain. Welded twist link steel chain finished to match door

plate and chain holder. Made from wrought brass or burnished wrought steel.

Brass Finishes: B3, B26DSteel Finishes: F3

980

For wood storm doors 7/8” to 1-1/8” thick. Reversible: fits right or left hand, in-swinging or out-swinging doors. Security lock feature operates from inside rose. Solid brass safety strike assures latching and is designed to compensate for air pressure build-up between doors.

Finishes: B3, B5, B10B, B15, B19, B26D

482

Solid bar door guard is for use on doors that are flush with frames. The solid bar, interlocking with the ball on the strike plate, permits the door to be slightly opened to allow viewing. The hinged bar allows the door guard to be positioned 180 degrees away from the door when not in

use. Edge guard, furnished with cast brass door guards, minimizes the chance for marring the door or frame. Strike plate is designed to prevent the solid bar from marring the inside of the door when in use. Made from cast brass or cast aluminum.

Aluminum Finishes: A3, A26DBrass Finishes: B3, B4, B26D, B15

CHAIN DOOR GUARD

STORM DOOR LATCH

LATCHESDOOR GUARDS

&

DOOR GUARD


CL12

Invisible latch is ideal for installations where no visible latch is desired. Unit can be installed at the top, bottom or side of the door.Can be mortised into the stop or surface mounted to the stop. Recommended for use on larger panels or regular size doors.Operation is simple, latching is accomplished by a slight push.

To unlatch the door, a harder push releases the door and pushes the door out.Brass and plastic construction. Applies 27 pounds to open the door.

Finishes: US4, US26D

BALL CATCHES

345 347 349

Ideal for small cabinets and small interior doors. Free rolling ball insures smooth,

positive and trouble-free action. Adjustable threaded barrel compensates for various door clearances. Adjustable spring tension. Made

from wrought brass.

For catch in door installations. Dual adjustment for door clearance and holding

strength. Lip strike is designed for use where strike is mounted in jamb. Free rolling ball

insures smooth, positive and trouble-free action. Adjustable threaded

barrel compensates for various door clearances. Adjustable spring tension. Made

from wrought brass.

For catch jamb installations. Dual adjustment for door clearance and hlding strength.

Narrow strike is designed for use where srike is mounted in door. Free rolling ball insures

smooth, positive and trouble-free action. Adjustable threaded barrel compensates for various door clearances. Adjustable spring

tension. Made from wrought brass.

Brass Finishes: B3, B15 Brass Finishes:B3, B4, B5, B10B, B15, B26, B26D Brass Finishes: B26D

LATCHESCATCHES

&

INVISIBLE LATCH


325 326 327

Double pole. Self aligning magnet insures maximum pull. Case design allows easy magnet adjustment

on cabinet or small door applications. Aluminum case.

Dual double pole. Self-aligning magnets insure maximum pull.

Can be surface mounted or mortised. Aluminum case.

Dual triple pole. Self-aligning magnets insure maximum pull. Can be surface mounted or

mortised. Aluminum case.

Aluminum Finishes: A92 Aluminum Finishes: A3, A92

Aluminum Finishes: A3, A92

S48

Brass oval turn knob and escutcheon.Steel bolt for extra strength.

Rack is milled for precision fit with pinion.

Brass Finishes: B3, B10B

MORTISE DOOR BOLTS

BOLTSCATCHES

&

MAGNETIC CATCH


FS18 L FS18 S FS434 2C

• Security Door Stops designed for use in high vandalism areas.• Molded from black flame resistant, resilient material around aheavy-duty stud.

• Once grouted in concrete, leaves no exposed fasteners to betampered with or removed.• Ideal for jail or security cell areas where floor mounted stops are required.

• FS18L also ideal for concrete wall applications.

• Burnished wrought steel.• For undercut doors up to 1-1/2”.

• Packed with screws and plastic anchors.• Replaceable soft, resilient gray rubber.

Finish: Rubber Finish: Steel Finish: 604

FS441 FS444 / FS448 FS446 / FS450

Accommodates door undercut up to 1-1/2”,Designed to blend well with all types of construction and provide a minimum of hindrance to cleaning efforts. FS441 packed

with expansion shield and tampin for masonry type mounting, and wood screws for drywall

mounting.

• Ideal for interior or exterior use.

FS444 is packed with expansion shield and lead shield, for masonry type mounting.

FS448 is packed with wood screws, for drywall mounting.

• Manual type floor holder ideal for interior or exterior use.

FS446 packed with expansion shield and lead shield, for masonry type mounting

FS450 packed with 3 wood screws, for drywall mounting.

Finishes: US26D, US3, US10B Finishes: US10, US10B, US26, US26D, US3

Finishes: US10B, US26, US26D, US28, US3

FLOOR STOPS

FLOOR STOPS


DOME STOPS

FS13 FS17 FS436 FS438

Standard FS13 for use where no threshold is used. Heavy-Duty

Cast Dome Stops constructed of brass.

One piece dome stop for use with thresholds. Heavy-Duty

Cast Dome Stops constructed of brass.

FS436 for doors without threshold. Heavy-Duty Cast Dome Stops constructed of brass, bronze or aluminum.

FS438 for doors with threshold or undercut doors. Heavy-Duty

Cast Dome Stops constructed of brass, bronze or aluminum.

Finishes: US3, US4 Finishes: US26 Finishes: US10, US10B, US15, US26, US26D, US3

Finishes: US10, US10B, US15, US26, US26D, US3

FS452-4 / FS452-5 FS495 / FS496 FS455-4 FS544-4 / FS555-5

Units provide simple hold and release, activated with a touch of the foot. Cast brass or aluminum

construction.

FS495 Wall Stop & Automatic Holder

FS496 Floor Stop & Automatic Holder

Automatic door holders ideal for heavy-traffic situations that require a simple, Hold-Open

device.

Units provide simple hold and release, activated with a touch of the foot. Cast brass or aluminum

construction.

Units provide an economical method to hold open doors.

Rubber shoe is securely fastened

FS544 for door-to-floor learances of 2” or less

FS555 for door-to-floor clearances up to 3”.

Finishes: US10B, US26D, US28, US10

Finishes: US10B, US26, US26D, US3

Finishes: US10B, US26, US26D, US3

Finishes: SP10, SP28, SP4, SP28

DOME STOPS

HOLDERS&

KICK DOWN HOLDERS


63 060 061

Utilizes heavy gauge spring to maintain rigid protections. Simple to install - only a

screwdriver required. Made from burnished wrought steel

Utilizes heavy gauge spring to maintain rigid protections.Simple to install, only a screwdriver required.

Rubber tip is replaceable.Made from burnished wrought steel.

Finishes: 619E, 716E Steel Finishes: F3, F5, F10B, F14, F15 Steel Finishes: F3, F5, F14

64

Base Door StopBase Door Stop features deluxe one-piece styling

Easily screws into baseDesigned with square head to accommodate wrench or pliers when installing

Made from solid brass or aluminum

Finishes: 619E, 716E

FLEXIBLE DOOR STOPS

BASE DOOR STOP

430

One-piece design easily screws into floor.Rubber tip is replaceable.

Made from solid brass or aluminum.

Brass Finishes: MB3, M10B

FLOOR DOOR STOPS

DOOR STOPS


69 70 72

For use on hinged doors where the installation of a standard door stop is not desirable. Positive slip proof adjustment.

Non-marring rubber tips. Removable bushings accommodate 1/4” to 5/16” diameter hinge pins. Made from burnished wrought steel.

For use on hinged doors where the installation of a standard door stop is

not desirable. Designed for narrow trim installation. High quality rubber bumpers - shoulder on stud supports rubber through

entire body for engineered cushioning.

For use on hinged doors where the installation of a standard door stop

is not desirable. Designed for narrow trim installation. High quality rubber bumpers - shoulder on stud supports rubber through

entire body for engineered cushioning

Steel Finishes: F3, F5, F10, F10B, F14, F15, F15A

Aluminum Finishes: A3, A5, A10B, A92, AW, ABLK, A14, A15, A716

Brass Finishes: B10B, B15, B19, B26Zinc Finish: 716E

Zinc Finishes: 613E, 619E

60 61

Projection is 3-3/4”. Made from solid brass or aluminum.

Rubber tip is replaceable.

Projection is 3-1/8” on brass units and aluminum units. Made from solid brass, aluminum, or epoxy colored aluminum.

Rubber tip is replaceable.

Aluminum Finishes: A3, A92Brass Finishes:

MB3, MB5, MB10B, MB15, MB26, MB26D

Aluminum Finishes: A3, A5, A10B, A19, A92, AW, A15, A716Brass Finishes:

MB3, MB5, MB10B, MB15, MB15A, MB19, MB26, MB26DSteel Finishes: 716E

RT

Rubber door stop tip.

Finishes: White

DOOR STOP TIPS

DOOR STOPS

HINGE PIN DOOR STOPS

BASE DOOR STOPS


WS11 WS20 WS33 WS40

Wall StopConstructed in heavy duty cast brass. Hexagon section on unit

aids in fastening unit when expansion shield is used.

Replaceable rubber bumpers features off-set shoulder and

threaded shank that screws into body of unit.

Manual Wall HolderConstructed in cast brass or

aluminum. Replaceable rubber bumpers feature off-set

shoulder and threaded shank that screws into body of

holder. Hinged strike furnished matches body material and

finish.

Wall StopConstructed in a durable cast

brass. Replaceable rubber bumper with offset shoulder screws into cavity on body

to prevent loss or theft. Sloping design discourages vandalism.

Automatic Wall HolderConstructed of sturdy cast brass, or aluminum. Holder

is mounted on wall and strike is mounted on door. Roller

on holder rides up seats itself on strike, with a heavy duty bumper pad deadening the

sound and shock.

Finish: 26D Finish: 26D Finish: 26D Finish: 26D

WS443 WS447 WS445 WS65

Wall StopsConstructed in brass. Ideal for interior or exterior use.

Replaceable non-marring rubber tip.

WS443 is packed with expansion shield and lead shield for masonry type mounting.

WS447 is packed with wood screws for drywall mounting.

Manual Wall HolderConstructed in cast of brass or aluminum. Unit functions as a

stop but serves as a Hold-Open device when hook is manually

engaged in strike.WS445 is packed with

expansion shield and lead shield for masonry type

mounting.

Wall StopBurnished cast aluminum.• Replaceable non-marring

white rubber bumper.• Packed with sheet metal

screws.

Finish: 26D Finishes: 10B, 26, 26D, 3 Finishes: 3 Finish: 26D, 10B, US3

WALL STOPS

HOLDERS&

WALL STOPS/HOLDERS


WS401CVX WS402CCV WS404CVX

WS401CVX (401) – convex rubber bumper, packed with wood screw and plastic anchor.

WS402CCV (402-1/2) – concave rubber bumper which avoids damage to locks with projecting buttons and is packed with screw and drywall anchor.

• Compact size.• Constructed in cast brass.

• Totally concealed mounting discourages vandalism or tampering.

• Unit furnished with grey convex rubber bumper.

• Packed with sheet metal screw, rawl plug and brad.

Finish: 10B Finish: 26D Finish: 10B, 26D, US3

WALL BUMPERS

WS406CVX WS407CCV WS407CVX

• Constructed in sturdy yet economical wrought base of brass or stainless steel construction.• Feature concealed tamper-proof mounting.

• Shipped factory preassembled backplate to reduce installation cost.• Easy installation by inserting screwdriver through small hole in rubber.

WS406CCV (406-1/2) – concave rubber bumper, which avoids damage to lockswith projecting buttons, packed with wood screw and plastic anchor.

WS407CVX (407) – convex rubber bumper packed with screw and drywall anchor.WS407CCV (407-1/2) – concave rubber bumper which avoids damage to locks with

projecting buttons and is packed with screw and drywall anchor.

Finish: 32D Finishes: 10, 10B, 15, 26, 26D, 3, 32D, 5 Finishes: 10, 10B, 26, 26D, 3, 32D

WALL STOPS

BUMPERS&


FS40/FS41Automatic door holders ideal for heavy-traffic situations that require

a simple, fool-proof, Hold-Open device.

Finish: 26D

R435/R437Extruded aluminum, mill finish.

R435 for conversion of FS436 Dome Stop to carpet installation.R437 For conversion of FS438 Dome Stop to carpet installation.

RISER FOR FS436/FS438 DOME STOP

FLOOR STOP & AUTOMATIC HOLDER

FS1153 FS1154

Plunger Type Door Holder Provides a contemporary yet economical method of positive

Hold-Open.• Constructed in sturdy cast aluminum.

• Spring operated plunger activates with minimal pressure, releasing instantly with a light tap on the plat-form lever.

Plunger Type Door Holder• Constructed from heavy-duty cast brass or bronze.

• Plunger and internal parts are plated steel and provides a 1-1/4” throw for all types of doors.

• Plunger is easily activated with minimal pressure, releasing instantly with a light tap on the platform lever.

Finishes: US28 Finishes: US10B, US26, US26D

PLUNGER TYPE DOOR HOLDER

HOLDERS

STOPS&


RB470 RB471 RB472

• Constructed in heavy-duty cast brass.• RB470 used where two doors open against each other to

prevent damage to the doors or hardware.• RB471 and RB472 are ideal for use in situations where doorsmeet each other at approximate right angles (back to back).

• Replaceable rubber roller available.

Finishes: 26D Finishes: 26D, 3 Finishes: 26D, 3, 10B

ROLLER BUMPERS

CS115

• Specially designed for full-size exterior doors.• Tear resistant, grey vinyl cover.

• Heavy duty compression spring assembled to both ends of chainand end brackets.

• Packed with sheet metal screws.• Cast Brass brackets with solid, welded steel chain.

• Optional sex bolt mounting available in US26D (626) only.

Dimensions:Bracket Size: 1-9/16” x 1-9/16”

Available Lengths:20-1/2” — Recommended for 30” Door Width (Product No. CS115-20)25-1/2” — Recommended for 36” Door Width (Product No. CS115-25)30-1/2” — Recommended for 42” Door Width (Product No. CS115-30)

Finishes: 10B, US26D

FLOOR STOPS

BUMPERS&

CRASH STOP


SR64 SR65 SR66

For use on metal frames featuring pneumatic design that, once installed,

forms an air pocket to absorb shock and reduce noise of door closing.

Tamper-proof once installed on the frame.Proper installation also eliminates door rattle and provides constant tension for

door latches or locks.

For use on wood frames, also feature pneumatic design to cushion shock

and absorb noise. To prevent removal, a small brad should be driven into stop strip and through stem of silencer, as shown in

the detail.

Self Adhesive Rubber Silencers.Economical installation requires no

drilling of frames.

Finishes: GRY (Gray) Finishes: GRY (Gray) Finishes: GRY (Gray)

AUXILIARY PUSHER

CL14

• Aid in the operation of the CL11 and CL12 where hinges orsurrounding conditions prevent smooth operation of doors.

• Provides 1-1/16” throw.• Nylon pusher.

• Brass construction.• Applies 10 pounds to open the door.

Finishes: US4, US26D

DOOR SILENCERS

SILENCERS

PUSHERS&


DP1 DP2

• Designed for use with the bottom bolt of all flush bolts.• Spring-loaded plunger returns to floor or threshold level anytime

flush bolt is retracted, eliminating need to clean standard floor strikes.• Strike hole is 3/4” Diameter and 1-1/8” Deep

Finishes: US3, US10, US26, US26D Finishes: US3, US10, US10B, US26D

FL20 FL32 FL44

Dimensions:20” 1-5/8” W x 5/8” D x 20” L



Finishes: 28, 26D, 315 AN Finishes: 28 Finishes: 28, 315 AN

CB1

Used when it is possible for the inactive door to be opened before the active door. Prevents damage to the doors and other hardware. Nylon roller insures quiet and efficient operation. Non-handed. All-steel construction. Standard sex bolts for mounting.

Finishes: USP, US26D

SERIES FILLER BARS

CARRY BAR

DUST PROOF STRIKES

STRIKES

BARS&


LG1 LG10 LG12 LG13

Units are non-handed and incorporate security frame pin to prevent separation of the door

and frame. LG7 does not incorporate the security frame pin

Ideally suited for use with rose or escutcheon 2-3/4” wide or less.

Narrow design unit for use on rose or escutcheon 3-1/2” or less.

Designed for use on all Type 161 Cylindrical Locks (ANSI

156.2 Series 2000)Monolock and Unilock.

Finishes: 32D Finishes: 32D Finishes: 32D Finishes: 32D

LOCK GUARDS

SC2 - 30 X 6 HERITAGE HOUSE NUMBER

SC2-3006#0

SC2-3016#1

SC2-3026#2

SC2-3036#3

SC2-3046#4

SC2-3056#5

SC2-3066#6

SC2-3076#7

SC2-3086#8

SC2-3096#9

4” High.Made from solid brass.

Finishes: 605, 619, 716

DOOR HARDWAREEXTERIOR



601 620

601 Sleeve for use with 620, 621 & 622 letter box plates.Made of stainless steel.

For 1-3/4” hollow core doors.

Magazine size letter box plate with standard (open) back plate. Spring loaded front plate.

Finishes: Stainless Steel Aluminum Finishes: PA28Brass Finishes: B3, B5, B26, , B26D, B716

U696 698/U698 700/U700 701

One-way viewer.150 degree angle of view.

For doors 1-3/8” to 2-1/16” thick.Secure, tamper resistant. Solid brass body; glass lens. Simple

installation.

190 degree angle of view.Lens projects 1/4” from face of

door. 4 optical glass lenses.For doors 1-3/8” to 2-1/8” thick.

Solid brass body & barrel.Simple installation.

120 degree angle of view.For doors 1-3/8” to 2-1/16” thick.

Secure, tamper-resistant.Solid brass body; glass lens.

Simple installation - only a 1/2” hole require.

120° Angle of View.For doors 2-1/8” to 2-5/8” thick.

Secure, tamper-resistant.Solid brass body; glass lens.

Simple installation—only a 1/2” hole required.

Finishes: B4, B26D Brass Finishes: B3, B26D, B716 Finishes: B4, B26D Finishes: B10B

02-3125Knocker Only

Knocker made from forged brass.Viewers supplied in B4 or B26D.

Finishes: 505, 605, 609, 619, 625, 716

DOOR KNOCKERS


MAIL SLOT SLEEVES

VIEWERS/UL LISTED


59 059 159

Made from cast brass or cast aluminum. Large faceplate for secure attachment to wall.

Features solid construction for increased strength.

Made from solid brass, cast aluminum or epoxy-coated aluminum. Large faceplate for

secure attachment to wall. Features solid construction for increased strength.

For use on commercial applications. Exceeds OSHA and BHMA strength test

requirements. Packed with square head iron lag screw, expansion shield and screws.

Aluminum Finishes: A3, A5, A92, A10B, A15, A716

Brass Finishes: MB3, MB5, MB15, MB26

Aluminum Finishes: A3, A10B, A92, AW, ABlk, A716, A15, A5

Brass Finishes: B3, B10B, B15, B15A, B19, B26

Finishes: US27, US3AL

HAND RAIL BRACKET

405 571 572

Wide body design is ideal for public buildings, schools, dormitories, etc., where

hook must withstand unusual stress and strain. Made from cast aluminum.

All-purpose hook in traditional design. Made from cast brass, cast aluminum, or

epoxy-coated aluminum.

Step-up decorative version of the traditional all-purpose hook. Ideal for locations where additional strength is required. Made from

cast brass or aluminum.

Aluminum Finishes: A3, A10, A92

Aluminum Finishes:A3, A14, A92, AW

Brass Finishes: MB3, MB10B, MB15, MB26

Aluminum Finishes: A92Brass Finishes: MB10, MB26

COAT & HAT HOOK

HOOKSBRACKETS

&


CEILING HOOK

580

Ideal for use in closets, attached to underside of shelves, or in storage lockers.Made from cast brass or cast aluminum.

Finishes: A92

WARDROBE HOOK

MOUNTING BRACKET

581 582

Compact hook is perfect where space is limited, such as behind doors where low profile is needed. Made from cast brass, cast aluminum or

epoxy-coated aluminum.

Compact double hook is perfect where space is limited, such as behind door where low profile is needed. Made from cast brass, cast aluminum

or epoxy-coated aluminum.

Aluminum Finishes: A3, A5, A92, AWBrass Finishes: MB3, MB10B, MB15, MB26

Aluminum Finishes: A3, A5, A92, AWBrass Finishes: MB3, MB10B, MB26

MB1 MB2 / MB2F (Fire Rated)

Allows stop mounted hardware to be properly installed withoutdamaging the COR coordinator, such as a parallel arm closer or

a non-fire-rated surface vertical rod strike.

Allows stop mounted hardware to be properly installed withoutdamaging the COR coordinator, such as a parallel arm closer or

a non-fire-rated surface vertical rod strike.

Finishes: USP Finishes: USP

HOOKSBRACKETS

&


07 90

Designed low to the sash for superior strength and greater resistance to breakage. Vertical and horizontal camming action for snug,

non-rattling fit. Heavy gauge springs provide long-wearing action.

Side Window LockMay be used singularly for small windows or in pairs for large

windows. Cam action eliminates rattles and holds window firmly in desired position. Made from aluminum.

Aluminum Finishes: A3Brass Finishes: MB3, MB15, MB26, B716 Aluminum Finish: A3

026

Facilitates opening of window in a safe manner. Can also be used as a drawer or utility pull.

Brass Finishes: MB3, MB15, MB26Aluminum Finishes: A3, ABlk, AW

UTILITY PULL

066 66

For use on windows to provide weather-tight fastening and security. Also ideal for securing louvered doors and small doors.

Made from solid brass or aluminum.

Base Size: 1-5/8” x 7/8” Aluminum Finishes: A3

Brass Finishes: B3, B15, B26, B26D

Base Size: 2-1/16” x 1-1/16”Brass Finishes: B3, B19, B26D, B716

Specify Strike: Mortise Strike (MS), Rim Strike (RS), or Surface Strike (SS)

WINDOWHARDWARE

WINDOW LOCKS

CASEMENT FASTENERS


CABINET/CLOSETKNOBS & PULLS

2

Ideal for use on the inactive leaf of a pair of cabinet doors. Surface applied, making installation simple.

Made from cast brass or cast aluminum.

Aluminum Finishes: A3, A92

22

Low profile makes this pull ideal for louvered, bi-folding or wardrobe doors. Extra deep recess and reverse tapered grip provide for ease of pulling and gripping.

Made from wrought brass.

Brass Finishes: B3, B10B, B15

221 222 223 227

Ideal for use on sliding doors. Built-in prong design eliminates

the need for screws or brads and facilitates installation. Packed with two escutcheon pins for

added holding power. Made from wrought brass.

Low profile makes this pull ideal for louvered, bi-folding or

wardrobe doors. Reverse tapered grip provide for ease of pulling.

Made from cast brass.

Low profile makes this pull ideal for louvered, bi-folding or

wardrobe doors. Made from wrought brass.

Contoured for ease of pulling. Extra deep well. Deluxe quality.


2-7/16”Brass Finishes:

B3, B5, B10, B10B, B15, B26, B26D, B716

Brass Finishes: B3, B5, B10B, B15, B26, B26D

Brass Finishes: B3, B10B, B15, B26, B26D

Brass Finishes: B3, B5, B10B, B15, B26, B26D

FLUSH PULLS

FLUSH BOLTS

ELBOW CABINET CATCHES


218

Ideal for use on sliding doors. Easy installation.


3/4” Brass Finishes: BB3, BB10B, BB15

42

Exclusive Ives design permits emergency release of bolt from outside the door.Spring activated design allows feather-touch action.

Brass grommet supplied to cap release hole, protecting the door’s finish.Made from wrought brass.

Brass Finishes: B3, B5, B10B, B15, B26

POCKET DOOR BOLTS

585 586

Flange design prevents accidental knock out of pole. Made from wrought steel.

Accommodates pole or pipe with outside diameter of 1-3/8”.Packed in pairs.

Made from a heavy duty plastic for long life and extra strength. Single screw mounting.

Accommodates pole or pipe with outside diameter of 1-3/8”. Packed in pairs.

Steel Finishes: F3 Finishes: P (Plastic)

CLOSET POLE SOCKETS


FINGER PULLS


230

3/4” width allows installation on narrow as well as standard doors. Spring automatically returns lever flush with plate.

Made from solid brass.

Brass Finishes: B3, B5, B10, B10B, B15, B26, B26D

8103EZHD

Door Pull - 1” RoundLarge 2-1/2” Clearance for the Accessibility Applications Available Sizes: 8”, 10”

Brass Finishes: 26D

990 991

Sliding door pull.Fits doors 1-3/8” to 1-1/2”.Decorative coined edges.

Pre-assembled for doors opening left to right. Plates are reversible.Body and strike made from solid brass.

Sliding door lock.Fits doors 1-3/8” to 1-1/2”.Decorative coined edges.

Pre-assembled for doors opening left to right. Plates are reversible.Body, turn knob and strike made from solid brass.

Aluminum Finishes: A26DBrass Finishes: B3, B609, B613, B619, B620, B26, B716

Aluminum Finishes: A26DBrass Finishes: B3, B609, B620, B26, B613, B716

SLIDING DOOR EDGE PULLS

DOOR PULL


SLIDING DOOR HARDWARE


NOTES

ives residential hardware pdfs/2016/ives.pdfives residential hardware distributed by hsi. table of...

Documents