iti operator manual english - kongsberg
TRANSCRIPT
Simrad ITITrawl instrumentation system
Operator manual
Simrad ITITrawl Instrumentation System
Base version
850--043814 / AA000
Operator manual
1850--043814D
Note
Simrad AS makes every effort to ensure that the information contained within thisdocument is correct. However, our equipment is continuously being improved andupdated, so we cannot assume liability for any errors which may occur.
Warning
The equipment to which this manual applies must only be used for the purpose forwhich it was designed. Improper use or maintenance may cause damage to theequipment or injury to personnel. The user must be familiar with the contents of theappropriate manuals before attempting to operate or work on the equipment.
Simrad AS disclaims any responsibility for damage or injury caused by improperinstallation, use or maintenance of the equipment.
Copyright
2002 Simrad AS
The information containedwithin this document remains the sole property of SimradAS. No part of this document may be copied or reproduced in any form or by anymeans, and the information contained within is not to be communicated to a thirdparty, without the prior written consent of Simrad AS.
Simrad ASStrandpromenaden 50Boks 1113191 Horten
Telephone: 33 03 40 00Facsimile: 33 04 29 87Internet: www.simrad.com
A L W A Y S A T T H E F O R E F R O N T O F T E C H N O L O G Y
Cover and Contents
IP2212D
Sections
1 System familiarizationThis section defines and describes the main system units, and presents a brief theoryof operation.
2 Operational proceduresThis section presents the most common procedures to cover the normal day-to-dayoperations.
3 Screen presentation modesThis section describes the various operationalmodes and the information found on thedisplay.
4 Command referencesThis section describes each command and option in detail. The document is intendedfor reference purposes only.
5 ITI sensorsThis section describes the sensors used with the ITI system. The description includescharging procedures and technical specifications.
6 On--board maintenanceThis section describes the preventive and corrective maintenance actions to beperformed by the ITI operator on board the vessel.
7 ITI EthernetThis section describes the Ethernet commands.
8 Technical specificationsThis section lists the main technical specifications of the Simrad ITI system.
Simrad ITI Base version
II P2212D
Remarks
ReferencesFurther information about the ITI system may be found in the following manual:
� ITI Installation Manual, P2257.
The readerThis operator manual is intended to be used by the system operator. He/she should beexperienced in the operation of positioning systems, or should have attended a Simradtraining course.
NoteThis manual includes sections that may be revised individually. In the event of arevision to any part of thismanual, this “Cover andContents” sectionwill be replaced.
Cover and Contents
IIIP2212D
Document revisions
Rev Written by Checked by Approved by
Date Sign Date Sign Date Sign
A . . .
B
C 02.04.93 NB 02.04.93 KEG 02.04.93 TAL
D 16.01.97 CL 16.01.97 EPB 16.01.97 KEG
E
F
G
H
The original signatures are recorded on the company’s logistic data system.
Simrad ITI Base version
IV P2212D
Simrad References(The information on this page is intended for Simrad’s internal use)
Documents
Sect Title Loc. File P.no/Rev
0 Cover and contents AA000 850--043814 P2212D
1 System familiarization 4AA024 850--130062 P3054/A
2 Operational procedures 4A0024 850--130661 P3053/A
3
4
5
6
7
8
Screen presentation modes
Command references
ITI sensors
On--board maintenance
ITI Ethernet
Technical specifications
4A0024
4A0024
4A0024
4A0024
4A0024
4A0024
850--130663
850--130660
850--130665
850--160664
850--160071
850--130666
P3055/A
P3052/A
P3057/A
P3056/A
P3454/A
P3058/A
Revisions
Rev. A First edition
Rev. B Second edition
Rev. C New software version 2.12
Rev. D Manual updated to reflect new software version 3.10. At the sametime Simrad’s new documentation standard has been implemented.
To assist us in making improvements to the product and to this manual, we wouldwelcome comments and constructive criticism. Please send all such - in writing or byEmail - to:
Simrad ASDocumentation Department
P.O.Box 111N-3191 Horten
Norway
or Email:
Sim
radITI
Operatormanual
Sim
radITI
Operatormanual
Sim
radITI
Operatormanual
Sim
radITI
Operatormanual