isab training brochure (rev 2) safety trg - tuv -...
TRANSCRIPT
StandardsCertification
Education & Training
PublishingConferences & Exhibits
ISA-Bangaloretechtraining
25�� to 28�� April 2018Bengaluru
Come Join ISA today&
Make a difference to your Professional Status
Apply for Membership:
Ph: +91 99866 73106 Email: [email protected]
Membership Fee: Regular US $ 60
Contact: Mr. Sukumaran Mathoor, Membership Chair
ISA Bangalore Section Hosts
TUV Nord India Training Program
Functional Safety Professional - Level-1
Certification Course
(in accordance with IEC 61508 & IEC 61531)
Mr. Palayam Swaminathan Singaravelu
Instrumentation Technologist with over 25+years of Experience in the Field of Electrical & Instrumentation and a
TÜV Certified 'Functional Safety Professional' -CFSP: ID: TP13050709 per IEC 61511: 2003.
Experienced in
Ÿ Functional Safety study for Safety Instrumented system (SIS) with respect IEC 61508 & IEC 61511
Ÿ SIL assessment of Safety Instrumented Function (SIF), Safety Requirement Specification (SRS), SIL
Verification and Validation.
Ÿ Knowledge of EXIDA exSILentia software
Ÿ Inspection of Instruments, FAT/SAT for DCS, SIS & PLC.
Ÿ Training on Functional Safety/Process Hazard Analysis(PHA) and other safety Modules as per Industry
Standards.
Major Projects/ Training handled:
Ÿ Orchid Chemicals & Pharmaceuticals, Chennai - PHA Study for multipurpose solvent distillation column
Ÿ Rohm & Hass, Philadelphia, US - Preparation of IPL, SRS and validation of SIS for Taloja 2 facility
and commissioning of SIS
Ÿ Rohm & Hass, Philadelphia, US - Validation and Commissioning of SIS for Chennai facility
Ÿ VA Tech Wabag, Chennai - HAZOP study for 3 of the STP plants in Philippines
Ÿ Reliance Reginery, Jamnagar - SIL assessment for granulation plant of J3 Refinery
Ÿ Larsen & Toubro, Mumbai - SIL Training
Ÿ Ethylene Plant, USA - HAZOP/ LOPA study for Ethylene cracking facility
Faculty:
www.isabangalore.org.in
www.isabangalore.org.in
SILIEC 61508
Registration:
Training investment:
Certificate & Validity:
About techTraining:
Course Features:
Course Objective:
Pre-requisite / Prior Knowledge:
Course Contents:
Who should Attend:
The Main Objective of the course is to provide each of the professionals to Design and Implement Functional Safety with applicable codes and Standard's with respect to IEC 61508 & 61511. The course provides the overview on the Safety requirement of the Plant with Respect to Process Safety, Risk Analysis, HAZOP, Design of Safety Instrumented system by Control Engineer with Installation, Commissioning, and Operation & Maintenance
Ÿ Minimum 3 years experience in areas where Functional Process Safety is involvedŸ University degree either Masters or Bachelor in Engineering
Ÿ Introduction to Functional Safety.Ÿ Safety Instrumented system (SIS)Ÿ Basics of Functional SafetyŸ Safety Life Cycle ConceptŸ Safety Integrity LevelŸ SIL Assessment and VerificationŸ Process Hazard & Risk AnalysisŸ Risk Reduction Analysis Techniques
Ÿ Layer of Protection Analysis (LOPA),HAZOP, FMEA, FTA & ETA
Ÿ Tolerable RiskŸ Safety Requirement Specification(SRS)Ÿ Functional Safety Standards IEC 61508 & 61511Ÿ Hardware DesignŸ Software DesignŸ Operation & Maintenance
Ÿ Instrument, Control, and Automation stream engineers from System Integrators
Ÿ Engineers in Engineering Consultancy CompaniesŸ Process Safety EngineersŸ Loss Prevention Professionals
Ÿ Plant Risk Analysis PersonnelŸ Reliability Assessment ProfessionalsŸ Marketing & Sales Professionals of Safety Equipment,
PLCs, etc.,Ÿ Manufacturing and Process Plant Operations Personnel
New technologies and the increasing number of functions within products mean that manufacturers have to develop more and more safety-relevant systems. This not only leads to an in-crease in the number of electronic components - the components and systems themselves are more complex and requirements as to their safety are becoming more stringent. Safety standard IEC 61508 stipulates that organizations must ensure that persons entrusted with tasks related to functional safety have a sufficient level of competence and also that they are suitably qualified. Since the publication of IEC 61508, therefore, employers have been urgently seeking trained and qualified personnel who can demonstrate their competence and professionalism
TUV’s 4 Day Training & Examination Programme provide detailed information, example and discussion for understanding and mastering the requirement of IEC 61508/ IEC 61511 functional safety.
Date 25�� to 28�� April 2018
Time 9:00 am to 6:00 pm
Venue Hotel Southern Star
40/2, Lavelle Road, Bengaluru 560001
“Functional Safety Certified Professional”- Level-1
- Besides Participation Certificate, the Certificate Level-1 will be Issued by TUV Nord, upon successfully qualifying in the examination after 3
days of training. The certificate shall be valid for a period of 5 years from the date of issue
Duration:3 Days of Class Room Training followed by 1 Day Examination (No. of Participants shall be limited to 20 only as
per norms for the training of Level-1 Program)
For General Participants: ₹ 50,000 + GST
For ISA Members: ₹ 43,000 + GST(ACM/ACS category members are not eligible for this special price)
GST @ 18 % Extra
Training Fee Includes:Participant KitParticipation CertificateRefreshments
Functional Safety
Mr. Palaniyappan S, Administrative Officer
ISA Bangalore Section#1237 GF, 3rd Cross, New Thippasandra,HAL 3rd Stage, Bangalore - 56-0 075
Ph: +91 98450 [email protected]
Bank Details:
A/c Name: ISA Bangalore SectionAccount No: 0472101034155Bank: Canara Bank, Hanumanthnagar BranchIFSC Code: CNRB0000472
Payment to be made by a crossed cheque in favour of: “ISA Bangalore Section” to be sent to :
Registration shall be confirmed upon receipt of payment by “ISA Bangalore Section”
For details on Training, please contact:
Mr. Vinay Avanchi, Training Chair
Ph: +91 77600 [email protected]
In line with the vision of International Society of
Automation - “To disseminate the highest quality,
unbiased automation information worldwide”,
ISA Bangalore Section has started “techTraining”
programs, a unique learning opportunity for young
professionals and students.
It is a non-biased and vendor neutral training program delivered by industry experts in the automation industry. The training
provides an overall understanding with deep insights in to automation and control concepts.
Ÿ Learn from the Industry Experts
Ÿ Network with Automation Professionals
Ÿ Enhance on-the-job Performance
Ÿ Certificate of Pariticipation
SILIEC 61508