inverter/chargers - rectifier

Inverter/ChargersIf you have a solar power system then a Inverter or chargers can assist you by optimising the energy your system generates. If your solar power system generates more energy than your business or household requires, the surplus or excess energy can be fed back into the utility grid or used for additional loads through the use of Inverter or chargers.

Inverter or chargers ensure that you maximise the energy produced by your solar system. They also allow you to access energy from your utility grid when your stored solar energy is insufficient.

Off-Grid InvertersIf you are looking to take your home or business completely “off-grid” and become independent from your unreliable electricity supplier then you will require an off grid inverter. This device is used in conjunction with other components to store energy that is generated from solar, wind or hydro-powered systems. This device ensures that you have access to stored surplus power when energy production is insufficient.

Victron Energy’s range of off grid inverters offers you a multi-functional power solution. Our inverters offer optimised efficiency without compromising on performance. We supply an extensive range of off grid inverters with multiple volt and amp options to ensure you are equipped with the device that is best suited to your system requirements.

Solar charge controllersVictron Energy’s range of solar regulators offers intelligent battery management and protection. Our range of 8 BlueSolar MPPT charge controllers can improve energy harvest by up to 30% on cloudy days as well as monitoring the state of charge and load output. Our PWM solar regulators or charge controllers protect against over load and short circuit as well as providing protection against reverse polarity connection of the solar array and/or battery.

Victron Energy offer solar regulators to suit your specific requirements and budget. The PWM charge controllers are a good low cost solution for small solar power systems while the MPPT controllers are better suited to higher power systems.volt and amp options to ensure you are equipped with the device that is best suited to your system requirements.

Battery ChargersVictron Energy offers an extensive range of chargers that can accommodate a wide variety of battery types. These technologically advanced chargers are built to withstand tough environmental conditions such as heat, humidity and salt air. The Victron Energy chargers include built-in battery controllers and fully monitored battery capacity to ensure optimal performance. Some of the devices in our Blue Power range are completely encapsulated; making them waterproof, shockproof and ignition protected. When compared to the industry standard, Victron Energy battery chargers outperform on every level.

Battery ProtectorsBattery protectors are responsible for disconnecting your loads before the battery is flat. This prevents unnecessary damage to your battery. Other beneficial features include auto ranging which automatically detects system voltage, over voltage protection which prevents damage to sensitive loads and delayed alarm output and delayed load disconnect. To ensure the quality and longevity of your battery, equip it with a Victron Energy battery protector. We have a selection of products to choose from in order to accommodate your specific requirements.

Victron Energy has 3 battery protectors to choose from, ranging from 40A-200A.

System MonitoringVictron Energy offers an extensive range of system monitoring products. These innovative devices provide functional value by monitoring and displaying the output of your inverters, batteries and chargers.

Within our range of system monitoring devices we have Digital Multi Control Panels, Remote Control Panels and Charge Controllers. These devices allow you to alter the charge current, monitor the system status and view the charge on your battery system.

System monitoring products provide you data relating to your power system.

Inverter/ChargersIf you have a solar power system then a Inverter or chargers can assist you by optimising the energy your system generates. If your solar power system generates more energy than your business or household requires, the surplus or excess energy can be fed back into the utility grid or used for additional loads through the use of Inverter or chargers.

Inverter or chargers ensure that you maximise the energy produced by your solar system. They also allow you to access energy from your utility grid when your stored solar energy is insufficient.

Multi CompactProven reliability – High start-up power

12V / 24V

The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.

Technical Data

Peak power (W) Order number

MultiPlus 12/500/20-16MultiPlus 12/800/35-16MultiPlus 12/1200/50-16MultiPlus 12/1600/70-16

900W R6 2021600W R7 7002400W R10 740 R12 192

Multi 12/500/20-16 Multi 12/800/35-16 Multi 12/1200/50-16Multi 12/1600/70-16

PowerControl no

Transfer switch 16A

Input voltage range 9,5 – 17 V / 19 – 33 V / 38 – 66 V

Output Output voltage: 230VAC ± 2%

Charger

AC Input 187-265 VAC

Charge current starter battery 1A (12V and 24V models only)

Battery temperature sensor yes

MultiPlus 12V9,5-17V Input range(V DC), 800-3000VA Continous output power at 25°C, Peak power(W) 1600-10.000.

The MultiPlus is a very powerful battery charger. It will, therefore, draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC).

Prices Excluding VAT


Technical Data


MultiPlus 12/3000/120-16MultiPlus 12/3000/120-50

6000W R21 995 R23 750

Multi+12/3000/120-16 Multi+12/3000/120

PowerControl yes

Transfer switch 50A

Input voltage range 9,5 – 17 V / 19 – 33 V / 38 – 66 V


Charger

AC Input Input voltage range: 95-140 VAC

Charge current starter battery 120/70


Technical Data Watt Price Order number

Multi+C12/800/35-16MultiPlus C 12/1200/50-16MultiPlus C12/1600/70-16MultiPlus C 12/2000/80-30MultiPlus C 24/800/16-16MultiPlus C 24/1200/25-16MultiPlus C 24/1600/40-16MultiPlus C 24/2000/50-30

800Watt 1200Watt 1600Watt 2000Watt 800Watt 1200Watt 1600Watt 2000Watt

R11 134.00 R13 932.00R14 250.00R17 805.00 R11 134.00 R13 932.00R14 250.00R17 805.00

Multi+C12/800/35-16Multi+C12/1200/50-16 Multi+C12/1600/70-16 Multi+C12/2000/80-30 Multi+C24/800/16-16 Multi+C24/1200/25-16 Multi+C24/1600/40-16 Multi+C24/2000/50-30

Model PowerControl PowerAssist Transfer switch (A)

Multi+C12/800/35-16 yes yes 16A

MultiPlus C 12/1200/50-16 yes yes 16A

MultiPlus C12/1600/70-16 yes yes 16A






MultiPlus 24V19–33V Input range(V DC), 800-5000VA Continous output power at 25°C, Peak power(W) 1600-10.000.

The MultiPlus is a very powerful battery charger. It will, therefore, draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel, a maximum generator or shore current can be set.

Technical Data


500/10-16MultiPlus 24/800/16-16

900W R6 2021600W R7 700

Multi 24/500/10-16 Multi 24/800/16-16

PowerControl No

Transfer switch 16A

Input voltage range9,5 – 17 V 19 – 33 V 38 – 66 V


Charger


Charge current starter battery (A) 1A (12 V and 24 V models only)



Technical Data


MultiPlus 24/1200/25-16MultiPlus 24/1600/40-16MultiPlus 24/2000/50-32MultiPlus 24/3000/70-50MultiPlus 24/5000/120-100

R10 740 R12 192 R16 640 6000W R23 75010 000W R35 185

Multi 24/1200/25-16 Multi 24/1600/40-16

Multi+24/3000/70-50 Multi+24/5000/120

PowerControl yes

Transfer switch 50A

Input voltage range 9,5 – 17 V 19 – 33 V

Output Output voltage: 120 VAC ± 2%

Charger


Charge current starter battery (A) 4 (12 V and 24 V models only)



MultiPlus 48V38–66V Input range(V DC), 3000-5000VA Continous output power at 25°C, Peak power(W) 1600-10.000.

The MultiPlus is a very powerful battery charger. It will, therefore, draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel, a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.

Technical Data


MultiPlus 48/500/20-16 R6 535 Multi 48/500/20-16

MultiPlus 48/1600/20-16 R12 828 Multi 48/1600/20-16

PowerControl No

Transfer switch 16A



Charger





Technical Data


MultiPlus 48/800/8-16MultiPlus 48/1200/13-16MultiPlus 48/3000/35-16MultiPlus 48/3000/35-50MultiPlus 48/5000/70-100

1600W R8 1092400W R11 3002500W R18 7136000W R19 18210.000W R28 028

Multi 48/800/9-16 Multi 48/1200/13-16Multi+48/3000/35-16 Multi+48/3000/35-50Multi+48/5000/70-100

PowerControl yes

Transfer switch 16A



Charger





Interface MK3-USB (VE.Bus to USB)

Connects to a USB port: R1 059.00 Order number: MK3-USB

Quattro 3-15kVA 12/24/48VPowerControl / PowerAssist

The Quattro is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (16A per 5kVA Quattro at 230VAC). * Ultra-fast Maximum Power Point Tracking

(MPPT)* Load output

Technical Data


Quattro 24/3000/70-50/50 Quattro 24/5000/120-100/100Quattro 24/8000/200-100/100Quattro 48/5000/70-100/100Quattro 48/5000/70-100/100-SQuattro 48/8000/110-100/100Quattro 48/10000/140-100/100Quattro 48/15000/200-100/100

6000W R31 76710000W R43 536 16000W R54 94210000W R35 24610000W R35 24616000W R47 832 20000W R57 15125000W R75 076

QUATTRO24/3000/70 QUATTRO 24/5000/120 QUATTRO 24/8000/200 QUATTRO 48/5000/70 QUATTRO 48/8000/110 QUATTRO 48/10000/140 QUATTRO48/15000/200

PowerControl yes

Transfer switch yes

Input voltage range Input voltage range: 187-265 VAC

Output Output voltage: 230 VAC ± 2%

Charger

Charge current starter bat-tery 4 (12V and 24V models only)


VE.Bus communication port For parallel and three phase operation, remote monitoring and system integration

visit website for full spec and download on the EasyPlus inverters


MultiPlus-IIThe Victron Energy MultiPlus-II inverter/charger combines the functions of the MultiPlus and the MultiGrid. It has all the features of the MultiPlus, plus an external current transformer option which extends the PowerControl and PowerAssist function to 100A.

visit website for full spec and download on the MultiPlus II inverters

Current transformer 100A:50mA for MultiGrid II

R756.00 Order number: CurrentTransformer

Technical Data

Peak power (W) Price ex-cluding VAT Pastel code

MultiPlus II 12/3000/120-32 230V 5500W R20 301

MultiPlus II 24/3000/70-32 GX 5500W R24 839

MultiPlus II 24/5000/120-50 230V R33 280

MultiPlus II 48/3000/35-32 38-66V/5500W R16 034 MultiPlus-II 48/3000

MultiPlus II 48/3000/35-32 GX 5500W R20 572 MultiPlus-II48/3000G

MultiPlus-II 48/5000/70-50 R25 732 MultiPlus-II 48/5000

Muiliplus II 48/5000/70-50GX R30 270 MultiPlus-II48/5000G

MultiPlus-II 48/8000/110-100/100 R45,382

MultiPlus-II 48/10000/140-100/100 230V R54,307

Transfer switch 32A

Charger


Battery temperature sensor VE.Bus Smart dongle (6) (optional)

Quattro 3-15kVA 12/24/48V

Contact us regarding

our unique backplate

options

EasySolar 12/24/48VAll-in-one solar power solution

The MPPT charge controller and the MultiPlus Compact inverter/charger share the DC battery cables (included). The batteries can be charged with solar power (BlueSolar MPPT) and/or with AC power (inverter/charger) from the utility grid or a genset.

Technical Data


EasySolar 12/1600/70EasySolar 24/1600/40

12V/1600W R20 876 24V/1600W R20 876

EasySolar 12/1600/70 EasySolar 24/1600/40

Transfer switch 16A

Charger

AC Input Input voltage range: 187-265 VACInput frequency: 45 – 65 Hz Power factor: 1


Solar Charge Controller

Maximum output current 50A

Maximum output current 700W / 1400W

Technical Data


EasySolarII 48/3000/35-32 48V/6000W R29 105 EasySol-II 48/3000

Transfer switch 50A

Charger

AC Input Output voltage: 230VAC ± 2%Frequency: 50 Hz ± 0,1% (1)




Maximum output current 2000W / 4000W


Technical Data


EasySolar 48/5000/70 48V/10000W R46 895 EasySolar 48/5000/70

Transfer switch 100A

Charger

AC Input Output voltage: 230VAC ± 2%Frequency: 50 Hz ± 0,1% (1)




Maximum output current 5800W

visit website for full spec and download on the EasySolar

EasySolar-II GX

All-in-one solar power solutionThe EasySolar combines a MPPT Solar Charge Controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring.

Models:1600VA, 3000VA, 5000VA

EasySolar 24/3000/70 - R29 105

Victron EasySolar 24/3000/70-50 MPPT 150/70 with Color Control panel - all-in-one solar power solution

The EasySolar-II GX combines a MPPT Solar Charge Controller, an inverter/charger and control hub in one enclosure. The product is easy to install, with a minimum of wiring.

EasySolar-II 24/3000/70-32 MPPT 250/70 GXR29 105 Excluding VAT

EasySolar-II 48/5000/70-50 MPPT 250/70 GXR46 895 Excluding VAT

Off-Grid InvertersIf you are looking to take your home or business completely “off-grid” and become independent from your unreliable electricity supplier then you will require an off grid inverter. This device is used in conjunction with other components to store energy that is generated from solar, wind or hydro-powered systems. This device ensures that you have access to stored surplus power when energy production is insufficient.

Victron Energy’s range of off grid inverters offers you a multi-functional power solution. Our inverters offer optimised efficiency without compromising on performance. We supply an extensive range of off grid inverters with multiple volt and amp options to ensure you are equipped with the device that is best suited to your system requirements.

Phoenix Inverter 3000VA12 / 24 / 48 Volt.

Pure sine wave output, high peak power and high efficiency. Combined high frequency and line frequency technologies ensure the best of both worlds.Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimised efficiency but without compromise in performance.

Phoenix Inverter 5000VA

Phoenix Inverter Compact 1200VA - 2000VA

12 / 24 Volt.

The Phoenix Inverter Compact is a pure sine wave inverter with a high efficiency. It is developed for professional duty and suitable for the wides range of applications. The Phoenix Inverters Compact is available from 1200VA up to 2000VA in 12V or 24V.

Technical Data

Peak power (W) Order Code

24/5000 R29 42348/5000 R23 825

12V/3000W24V/3000W

PhoenixInver 24/5000 PhoenixInver 48/5000

Parallel,3-phase and split-phase operation

yes

Inverter

Peak power (W) 6000

Output Output voltage: 120 VAC ±2% Frequency: 60 Hz ± 0,1% (1)

Zero load power (W) 20

Remote on-off yes

Technical Data


12/3000 R18 698 24/3000 R18 69848/3000 R16 822

12V/3000W24V/3000W48V/3000W

PhoenixInver 12/3000 PhoenixInver 24/3000 PhoenixInver 48/3000

Parallel and 3-phase operation yes

Input voltage range (V DC)

Input voltage range (V DC) 9,5 – 17V 19 – 33V 38 – 66V

Output Output voltage: 230 VAC ±2% Frequency: 50 Hz ± 0,1% (1)

GENERAL

Programmable relay Yes

Remote on-of yes

Safety EN 60335-1

12 / 24 Volt.

Pure sine wave output, high peak power and high efficiency. Combined high frequency and line frequency technologies ensure the best of both worlds.Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimised efficiency but without compromise in performance.

Technical Data


C12/1200 R9 576.00C12/1600 R11 678.00 C12/2000 R13 190.00 C24/1200 R9 576.00C24/1600 R11 678.00 C24/2000 R13 190.00

12V/1200W12V/1600W12V/2000W24V/1200W24V/1600W24V/2000W

PhoenixInverC12/1200 PhoenixInverC12/1600 PhoenixInverC12/2000PhoenixInverC24/1200 PhoenixInverC24/1600 PhoenixInverC24/2000

INVERTER

Input voltage range (V DC) 9,5 – 17V 19 – 33V 38 – 66V

Output yes

Safety Output voltage: 230 VAC ±2% Frequency: 50 Hz ± 0,1% (1)

Prices Excluding VAT Prices Excluding VAT Prices Excluding VAT

Phoenix Inverter 800VA-12/24/48V12 / 24 / 48 Volt.

Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimized efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem free, to any load.

Technical Data

Peak power (W) Order Number

12/800 R4 23624/1200 R6 202 48/800 R4 538

12V/1600W24V/2400W48/1600W

Phoenix12/800VE.SchPhoenix24/800VE.Sch Phoenix48/800VE.Sch

Cont. AC power at 25°C (VA) 700 / 650

Output AC volt-age / frequency

110 VAC or 230 VAC +/- 3% 50 Hz or 60 Hz +/- 0,1%

ENCLOSURE

Protection category IP 20

Remote on-off switch Two pole connector

Automatic transfer switch Filax

Phoenix Inverter 1200VA-12/24/48V

Technical Data

Peak power (W) Order Number

12/1200 R6 202

48/1200 R6 655

12V/24000W

48/240000W

Phoenix12/1200VE.Sch

Phoenix48/1200VE.Sch

Cont. AC power at 25°C (VA) 1000 / 900

Output AC voltage / frequency

110 VAC or 230 VAC +/- 3% 50 Hz or 60 Hz +/- 0,1%

ENCLOSURE

Protection category IP 20

Remote on-off switch Two pole connector

Automatic transfer switch Filax



visit website for full spec and download on the Phoenix range

Phoenix Inverter smartOrder number Price

Phoenix Inverter 12/1600 Smart R10,513





Phoenix24/3000 Smart R15,975

Phoenix24/5000 Smart R26,472



Phoenix Inverter 48/3000 Smart


Phoenix Inverter Smart 1600VA & 2000VAThe Phoenix Inverter Smart is an efficient and reliable inverter. Built on our proven and field tested Phoenix inverter platform, it now comes with a new slimmer design and full metal casing. Models are available in 1600VA and 2000VA for 12, 24 or 48V systems.

It’s powerful enough to supply most common plug in appliances in your car, boat, caravan or home. A toroidal transformer provides a high peak power surge capacity, stable voltage, frequency and high quality sine-wave.

Installation is simpler than ever before with terminals now more accessible for the installer, enabling a more professional finish.

Bluetooth is built-in, and makes setting up your high power inverter easier than ever before.

Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode and more, all from within VictronConnect.

Phoenix Smart IP43

Order number Price Order code

Phoenix Smart IP43 Charger 12/30(1+1) R5,749 PnixIP43Smt12/30 1+1

Phoenix Smart IP43 Charger 12/30(3) R6,187 PnixIP43Smt12/30 3








Phoenix Inverter VE.Direct

Technical Data

Peak power (W)

12/250 R1 452.00 excl.VAT24/250 R1 452.00 excl.VAT48/250 R1 694.00 excl.VAT

12V/400W24V/400W48V/400W

Cont. AC power at 25°C (VA) 200 / 175W

Cont. power at 25°C 250VA

Technical Data

Peak power (W)

12/375 R1876.00 excl.VAT24/375 R1876.00 excl.VAT48/375 R2117.00 excl.VAT

12V/700W24V/700W48V/700W



Technical Data

Peak power (W)

12/500 R2587.00 excl.VAT24/500 R2587.00 excl.VAT48/500 R3056.00 excl.VAT

12V/900W24V/900W48V/900W



Technical Data

Peak power (W)

12/800 R4 236 excl.VAT24/800 R4 236excl.VAT48/800 VE.Direct Schuko R4 538.00 excl.VAT

12V/1500W24V/1500W48V/1500W



250VA 375VA

500VA 800VA

Highly Reliable - built for the years aheadPhoenix Inverters are built to last. They feature sophisticated full-bridge and toroidal transformer topology - which is suitable for powering sensitive electronics. They are overload, temperature, and short-circuit protected.

Full bursts - High Peak outputSome electronic devices - particularly those which have an electric motor - require short burst of energy on start-up which is much higher than their rated power consumption. No problem - the Phoenix inverter has industry-leading peak-power capability.

Intelligent alarms, shut-downs, and re-startsA high power draw on start-up can trigger false alarms, and shut-downs. Phoenix makes allowance for this and only shuts down in cases of persistent overload. Intelligently - shut downs will be followed by a series of re-starts - to eliminate ‘false alarms’.

Order Code:12V: Phoenix12/250VE.Sch24V: Phoenix24/250VE.Sch 48V: Phoenix48/250VE.Sch

Order Code:12V: Phoenix12/375VE.Sch24V: Phoenix24/375VE.Sch48V: Phoenix48/375VE.Sch


Order Code:12V: Phoenix12/800VE.Sch 24V: Phoenix24/800VE.Sch48V: Phoenix48/800VE.Sch

visit website for full spec and download on the Phoenix VE.Direct range

The inverter is equipped with a display to read out battery, inverter, and solar charger details. These parameters can also be read out via Bluetooth by the VictronConnect App. In addition to this, the inverter has a VE.Direct and a VE.Can Port, for connection to a GX device for system monitoring.

Inverter RS Smart Solar 48/6000

Technical Data Inverter RS Smart Solar Inverter RS Smart

DC Input voltage range 38 – 64 V (6) 38 – 64 V (6)

Peak power 9 kW for 3 seconds 9 kW for 3 seconds

Short-circuit output current 50A 50A

Built in PV isolator yes no

Order Code

Price excluding VAT R 29 801 excl.VAT R 22 691 excl.VAT


Order Code:12V: Phoenix12/800VE.Sch 24V: Phoenix24/800VE.Sch48V: Phoenix48/800VE.Sch

Solar charge controllersVictron Energy’s range of solar regulators offers intelligent battery management and protection. Our range of 8 BlueSolar MPPT charge controllers can improve energy harvest by up to 30% on cloudy days as well as monitoring the state of charge and load output. Our PWM solar regulators or charge controllers protect against over load and short circuit as well as providing protection against reverse polarity connection of the solar array and/or battery.

Victron Energy offer solar regulators to suit your specific requirements and budget. The PWM charge controllers are a good low cost solution for small solar power systems while the MPPT controllers are better suited to higher power systems.volt and amp options to ensure you are equipped with the device that is best suited to your system requirements.

BlueSolar MPPT 75/10, 75/15 & 100/15Solar charge controller.

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life.

Technical Data

BlueSolar Controller MPPT 75/10 MPPT 75/15 MPPT 100/15

Rated charge current 10A 15A 15A

Order number BlueSol MPPT75/10 BlueSol MPPT75/15 BlueSol MPPT100/15

Price excluding VAT R1 226 R1 362 R1 664

Nominal PV power, 12V 145W 220W 220W

Nominal PV power, 24V 290W 440W 440W

Max. PV short circuit current 12A 20A 20A

Maximum PV open circuit voltage 75V 100V

ENCLOSURE

Protection category IP43 (electronic components), IP22 (connection area)

Remote Monitoring and ControlRemotely control and monitor the extensive features of your BlueSolar MPPT charger by attaching a bluetooth dongle and pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations - even when there is no internet connection or phone signal nearby - you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally.

Mains Cord CEE7/7 for Smart IP43 Charger 2m MainCordCEE SmtIP43 R143Mains Cord UK for Smart IP43 Charger 2m MainCordUK SmtIP43 R143Mains Cord AU/NZ for Smart IP43 Charger 2m MainCordAU/NZSmtIP43 R143

BlueSolar MPPT 100/30 & 100/50A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life.

Technical Data

BlueSolar Controller MPPT 100/30 MPPT 100/50

Battery voltage 12/24V Auto Select

Order number BlueSol MPPT100/30

BlueSol MPPT100/50

Prices excluding VAT R3 025 R4 538

Rated charge current 30A 50A

Nominal PV power, 12V 440W 700W


ENCLOSURE

Protection categoryIP43 (electronic

components), IP22 (connection area)

SmartSol MPPT100/30Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations - even when there is no internet connection or phone signal nearby - you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally.

Technical Data

SmartSolar MPPT 100/30 (12/24V-30A) MPPT 150/35


Rated charge current 430A

Nominal PV power, 12V 440W


Order number SmartSol MPPT100/30

Prices excluding VAT R4 538.00

BlueSolar MPPT 150/45 & 150/60 - Tr

Real-time data Display Options– Apple and Android smartphones, tablets and other devices: see the VE.Direct to Bluetooth Smart dongle– ColorControl panel

Technical Data

BlueSolar Controller MPPT 150/45TR

MPPT 150/60TR

Battery voltage 12/24/48V Auto Select





Order number

BlueSolar MPPT 150/45R6 051.00 excluding VATBlueSol MPPT150/45TR BlueSol MPPT150/60TR


BlueSolar MPPT 150/85


Technical Data

BlueSolar Controller MPPT 150/85

Battery voltage

Order number BlueSol MPPT150/85

Prices excluding VAT R8 212





ENCLOSURE

Protection category

Screw terminal

MC4 Connection

BlueSolar MPPT 150/45 & 150/60 MC4Real-time data Display Options– Apple and Android smartphones, tablets and other devices: see the VE.Direct to Bluetooth Smart dongle– ColorControl panel

Technical Data

BlueSolar Con-troller

MPPT 150/45MC4

MPPT 150/60MC4






Order number BlueSol BlueSol


BlueSol MPPT150/70TR R8 319

BlueSol MPPT150/70MC R8 319

SmartSolar MPPT RS

SmartSolar MPPT RS 450/200-TR R31 767 - exclduing VAT

The SmartSolar MPPT RS solar charge controllers are Victrons solution for systems with large series connected PV arrays charging 48 V DC battery banks. This product is perfect for large off-grid, and grid connected battery systems.

BlueSolar MPPT 150/45 & 150/60 - Tr

BlueSolar MPPT 150/45 & 150/60 MC4

BlueSolar MPPT 150/70 & 150/85 MC4


Technical Data



Order number BlueSol MPPT150/70MC






ENCLOSURE

Protection categoryIP43 (electronic components),

IP22 (connection area)

SmartSolar MPPT 75/10, 75/15,

Technical Data


MPPT 75/15


SmartSol MPPT75/15


Battery voltage 12/24V Auto Selec




ENCLOSURE

Protection categoryIP43 (electronic compo-nents), IP22 (connection

area)

Bluetooth Smart built-in dongle not neededThe wireless solution to set-up, monitor and update the controller using Apple and Android smartphones, tablets or otherdevices.

SmartSolar MPPT 100/15 & 100/20

Technical Data


MPPT 100/20


SmartSol MPPT100/20






ENCLOSURE


area)

Bluetooth Smart built-in dongle not neededThe wireless solution to set-up, monitor and update the controller using Apple and Android smartphones, tablets or otherdevices.


Technical Data


MPPT 100/50



SmartSol MPPT100/50





ENCLOSURE

Protection category IP43 (electronic components), IP22 (connection area)

Solar charge controller.

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life.

Technical Data







Rated charge current

12V: 500W / 24V: 1000W / 36V: 1500W / 48V: 2000W

Max. PV short circuit current 40A

Maximum efficiency 98%

ENCLOSURE

Protection category

IP43 (electronic components),

IP22 (connection area)

SmartSolar MPPT 150/35-40

SmartSolar MPPT 150/45 & 150/60Choose between TR or MC4 terminal

Technical Data


Order number

SmartSolar MPPT 150/45-TR SmartSolar MPPT 150/45-MC

Smart-SolMPPT150/60TRSmart-

Prices exclud-ing VAT

R7 564 R7 564

R8 319R8 319

Battery volt-age 12/24V Auto Selec




ENCLOSURE

Protection category

IP43 (electronic components), IP22 (connection area)

SmartSolar MPPT 250/70 - 250/85

Technical Data


MPPT 250/85

Battery voltage12 / 24 / 48V Auto Select (software tool needed to

select 36V)

Order number SmartSolMPPT250/70MC SmartSolMPPT250/85MC

Prices excluding VAT 70 - R11 345 MC85 - R12 857 MC




Maximum PV power, 48V 4000W 4900W

ENCLOSURE


area)


Technical Data


Order number

SmartSolMPPT150/70TR SmartSolMPPT150/70MCSmartSolMPPT150/85TR SmartSolMPPT150/85MC

Prices excluding VAT

R9 076 TR R9 076 MC4

on request TRR10 589 MC4





ENCLOSURE

Protection category

IP43 (electronic components), IP22 (connection area)

Choose between TR or MC4 terminal

SmartSolar MPPT 150/100 & 250/60Choose between TR or MC4 terminal

Technical Data


MPPT 250/60

Order numberSmartSMPPT150/100MCSmartSolMPPT250/60TRSmartSolMPPT250/60MC

Prices excluding VAT 60 - TR - R9 832

Prices excluding VAT 60 - MC - R9 832

Prices excluding VAT 100 - MC - R12 102





ENCLOSURE


area)

Choose between TR or MC4 terminal

SmartSolar Pluggable Display

Order code: SmartSolPlugDis Price excl.VAT: R756

MPPT Control

Order code: Mppt Control Price excl.VAT: R1 210

SmartSolar MPPT 150/45 up to 250/100The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.

BlueSolar PWMBlueSolar PWM-Pro The BlueSolar PWM-Pro series is ready for use with its default settings. It also is fully programmable.

• Lighting control function, fully programmable. • Three stage battery charging (bulk, absorption, float), fully programmable.• Integrated battery monitor function (Remote Panel needed to display state of charge).

BlueSolar PWM-Light

• Load output with low battery voltage disconnect function.

• Lighting control function, one timer only.

• Two digit seven segment display for quick and easy setting of the load output functionality, including timer setting.

PWM-Light 12/24-512/24V

- Load output with low battery voltage disconnect function.- Lighting control function, one timer only.- Two digit seven segment display for quick and easy setting of the load output functionality, including timer setting.

Technical Data

BlueSolar Controller 12/24-5

Battery voltage12/24 V with

automatic system voltage detection

Order number B/S PWM LT 12/24-5A

Prices excluding VAT R379.00


Automatic load disconnect Yes

Battery

Charge voltage ‘absorption’ 14.2V / 28,4V

Charge voltage ‘float’ 13.8V / 27,6V

Low voltage load disconnect 11,2V / 22,4V

PWM-Light 12/24-1012/24V


Technical Data



automatic system voltage detection





Battery

Charge voltage ‘absorption’ 14.2V / 28,4V


Low voltage load discon-nect 11,2V / 22,4V

PWM-Light 12/24-2012/24V


Technical Data



automatic system volt-age detection




Automatic load dis-connect Yes

Battery

Charge voltage ‘ab-sorption’ 14.2V / 28,4V



BlueSolar PWM-Light 48-10 Day/night timing options

- Load output with low battery voltage disconnect function.- Lighting control function, one timer only.- Seven segment display for quick and easy setting of the load output functionality, including timersetting

Technical Data

BlueSolar Controller 48-10

Battery voltage 10A

Order number B/SPWMLT48V-10A

Prices excluding VAT R908


Maximum solar voltage 100 V

Humidity (non-condensing) Max 95%

Battery

Bulk charge 58,0V (1)

Charge voltage ‘absorption’ 56,8V

Charge voltage ‘float’ 55,2V


- Load output with low battery voltage disconnect function.- Lighting control function, one timer only.- Seven segment display for quick and easy setting of the load output functionality, including timer setting

Technical Data


Battery voltage 20A


Order number B/SPWM-LT48V-20A




Battery




PWM-Light 12/24-3012/24V


Technical Data



automatic system volt-age detection




Automatic load dis-connect Yes

Battery

Charge voltage ‘ab-sorption’ 14.2V / 28,4V




- Load output with low battery voltage disconnect function.- Lighting control function, one timer only.- Seven segment display for quick and easy setting of the load output functionality, including timer setting

Technical Data


Battery voltage 30A

Order number B/SPWM-LT48V-30A





Battery




BlueSolar PWM - PRO 12/24-5Programmable

The BlueSolar PWM-Pro series is ready for use with its default settings. It also is fully programmable:- With help of a computer and software (available free of charge from our website)- With the dedicated BlueSolar Pro Remote Panel

Technical Data


Battery voltage 12/24V with automatic system voltage detection


Order number B/SPWMPro12/24-05


Maximum solar voltage 28V / 55V (1)


Load output Manual control + low voltage disconnect

BlueSolar PWM - PRO 12/24-10Programmable


Technical Data


Battery voltage12/24V with auto-

matic system voltage detection

Automatic load discon-nect Yes

Order number B/S PWM-Pro12/24-10A




Load output Manual control + low voltage disconnect

BlueSolar PWM-PRO 24-20

BlueSolar PWM - PRO 12/24-5-30Programmable


Technical Data


Battery voltage12/24V with automatic

system voltage de-tection






Load outputManual control +

low voltage discon-nect

Programmable


Technical Data


Battery voltage12/24V with auto-

matic system voltage detection






Load outputManual control +

low voltage discon-nect

visit website for full spec and download on the PWM Chargers

Programmable

The BlueSolar PWM-Pro se-ries is ready for use with its default settings.It also is fully programma-ble:– With help of a computer and software (available free of charge from our website)– With the dedicated Blue-Solar Pro Remote Panel

Order Code: B/S PWM-Pro12/24-30A

Remote panel for BlueSolar PWM-Pro

Order code: B/S PWM-PRO REMOTE Price excl.VAT: R908.00

BlueSolar PWM-Pro to USB interface cable

Order code: B/S PWM-Pro to USB Price excl.VAT: R182

Inverting remote on-off cable

Order code: Price excl.VAT: R302

VE.Direct TX digital output cable (PWM light dimming cable)

Order code: VE.DirectTX Digital Price excl.VAT: R151.00visit website for full spec

and download on the Blue-Solar MPPT Chargers

Technical Data

BlueSolar MPPT 150/45-MC4 (12/24/48V-45A)

BlueSolar MPPT 150/60-MC4 (12/24/48V-60A)

Order number BlueSol MPPT150/45MCBlueSol MPPT150/60MC

Prices excluding VAT R6 806R7 564

BlueSolar MPPT

This Victron Energy remote display (SCC900300000) was espe-cially designed for free programming of charge controllers out of the PWM-PRO-family.

The display enables you to adjust the charge contoller’s set-tings according to your needs - even the lighting control. It is big enough to recognize everything easily.Easier and quicker than direct programming on the charge con-troller via 5 buttons only.

Victron Remote Display for BlueSolar PWM-Pro

Temperature sensor for BlueSolar PWM-Pro

Order code: TempSen B/S PWM Pro Price excl.VAT: R182.00

Battery ChargersVictron Energy offers an extensive range of chargers that can accommodate a wide variety of battery types. These technologically advanced chargers are built to withstand tough environmental conditions such as heat, humidity and salt air. The Victron Energy chargers include built-in battery controllers and fully monitored battery capacity to ensure optimal performance. Some of the devices in our Blue Power range are completely encapsulated; making them waterproof, shockproof and ignition protected. When compared to the industry standard, Victron Energy battery chargers outperform on every level.

Phoenix Charger 12/5012 / 24 Volt

Adaptive 4-stage charge characteristic: bulk - absorption - float - storage. Two full rated outputs and one 4 Amp output.

Technical Data

Phoenix Charger 12/50

Input voltage range (V AC) 90-265

Charge voltage ‘absorption 14,4

Charge voltage ‘float 13,8

Battery capacity (Ah) 200-800

Battery-connection M6 studs

Order number PhoenixCharger 12/50

Price excluding VAT R9 788


Adaptive 4-stage charge characteristic: bulk - absorption - float - storage. Two full rated outputs and one 4 Amp output.

Technical Data



Charge voltage ‘absorption 28,8







Technical Data



Charge voltage ‘absorp-tion 28,8






NEW!

visit website for full spec and download on the Phoenix Chargers

Adaptive 4-stage charge characteris-tic: bulk – absorption – float – storageThe Phoenix Charger features a micro-processor controlled ‘adaptive’ battery management system that can bepreset to suit different types of batteries. The ‘adaptive’ feature will automatically optimise the process relativeto the way the battery is being used.

The right amount of charge: variable absorption timeWhen only shallow discharges occur (a yacht connected to shore power for exam-ple) the absorption time is keptshort in order to prevent overcharging of the battery. After a deep discharge the absorption time isautomatically increased to make sure that the battery is completely recharged.

Technical Data

Skylla-IP65 12/70 (1+1) 12/70 (3) 24/35 (1+1) 24/35 (3)

Input voltage range (V AC) 120/230 V

Input voltage range (VAC) 90-265 V

Maximum AC input current @ 100 VAC 12 A

Charge current 70 A 3 x 70 A 35 A 3 x 35 A

Price excluding VAT R11 951 R13 161 R11 951 R13 161

Skylla-IP65 Battery Charger

Skylla-i remote on-off cable

Order code: Price excl.VAT: R530


Skylla-i24Volt

24 Volt

A modern and powerful battery charger that withstands the rigors of an adverse environment: heat, humidity and salt air.

Technical Data

Skylla-i 24/80 (1+1)



Charge current (A) 80 A

Charge current starter batt. 4 A

Battery capacity (Ah) 400-800 Ah

Order number Skylla-I 24/80(1+1)


Skylla-i24Volt

24 Volt


Technical Data

Skylla-i 24/80 (3)



Charge current (A) 3 X 80 A



Order number Skylla-i 24/80(3)


Skylla-i24Volt

24 Volt


Technical Data

Skylla-i 24/100 (1+1)



Charge current (A) 100 A



Order number Skylla-I 24/100(1+1)


Skylla-i24Volt

24 Volt


Technical Data

Skylla-i 24/100 (3)



Charge current (A) 3 x 100 A(max total

output: 100A)



Order number Skylla-i 24/100(3)


Skylla-TG Charger24Volt24 Volt

One full rated output and one 4 Amp output. Charge voltage can be precisely adjusted to suit any battery system.

Technical Data

24/30 TG24/50 TG

24Volt / 30A24Volt / 50A

Input voltage range (VAC) 230


Input voltage range (V DC) 180-400



Order number Skylla-TG 24/30 Skylla-TG 24/50

Price excluding VAT R10 694 R11 572

Skylla-TG Charger24Volt / 3 phase24 Volt


Technical Data

24/50 TG 3 phase 24Volt / 50A

Input voltage range (VAC) 3 x 400


Input voltage range (V DC) n. a.



Order number SkyllaTG 24/50-3Phas


Skylla-TG Charger24Volt 24 Volt


Technical Data

24/80 TG24/100 TG









Skylla-TG Charger24Volt

Skylla-TG Charger24Volt - 3 phase 24 Volt


Technical Data

24/100 TG 3 phase 24Volt / 100A

Input voltage range (VAC) 3 x 400


Input voltage range (V DC) n. a.



Order number SkyllaTG24/100-3Phas


Skylla-TG Charger48Volt 48 Volt


Technical Data

48/25 TG48/50 TG





Charge current starter batt. n. a




Skylla-TG GMDSS-24Volt 24 Volt

The Victron Skylla-TG 24/30 and 24/50 GMDSS Chargers have been designed to provide all required monitoring and alarm data.

Technical Data

Skylla-TG 24/30Skylla-TG 24/50



Input voltage range (V AC) 90 - 265

Frequency (Hz) 45-65

Power factor 1

Charge current (A) 30 (limited to 22 A at 110 V AC)

Order number

Skylla-TG24/30 GMDSS Skylla-TG24/50 GMDSS


Technical Data

Skylla-TG 24/50 (1+1)Skylla-TG 24/30 (1+1)Skylla-TG 24/100 (1+1)

R14 129R13 054R27 925

Input voltage range (VAC) 90-265



Battery capacity (Ah) 30 (limited to 22 A at 110V AC)

Order number SkyllaTG24/100-G 90


24 Volt

Skylla IP44 12 & 24Volt 12 / 24 Volt

Technical Data

Skylla IP44 12/60 (1+1) Skylla IP44 12/60 (3) Skylla IP44 24/30 (1+1) Skylla IP44 24/30 (3)

12Volt / 60A12Volt / 60A / 3Phase 24Volt / 60A24Volt / 60A / 3Phase

Input voltage range (VAC) 120/230 V

Charge current starter batt. n. a

Battery capacity 300-600 Ah

Order number

SkyllaIP44 12/60 1+1 SkyllaIP44 12/60 (3) SkyllaIP44 24/30 1+1 SkyllaIP44 24/30 (3)

Price excluding VAT on request

visit website for full spec and download on the Skylla Chargers

Skylla-TG Charger24Volt

Skylla-TG GMDSS-24Volt

Centaur Charger 12Volt 12 Volt

The new Centaur range of battery chargers from Victron Energy have been designed to be a true world-wide product.

Technical Data

Centaur Charger 12/20

Input voltage range (VAC) 90 – 265

Input voltage range (V DC) 90 – 400


Power factor 1

Charge current (A) 20A

Order number CentaurCharger 12/20




Technical Data





Power factor 1

Charge current (A) 30/16A





Technical Data





Power factor 1








Technical Data





Power factor 1






Technical Data





Power factor 1




Technical Data





Power factor 1






Technical Data





Power factor 1

Charge current (A) 100/60

Order number CentaurCharger12/100




Technical Data





Power factor 1





Technical Data

Skylla-IP44 24/30 (3)

Input voltage range (VAC) 120/230 V


Maximum AC input cur-rent @ 100 VAC 10 A

Power factor 0,98

Charge current (A) 3 x 30 A

(max total output: 30 A)



Technical Data





Power factor 1






Installation made easy1. Fasten the separate mountingplate (A) to the wall where youwant to place the battery charger,and simply hook up the Centaur.2. Secure the bottom of the backside(B) to the wall.

visit website for full spec and download on the Centaur Chargers

Centaur Charger 24Volt

Check the status of your battery remotelyThe Blue Smart IP22 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.

Recovery of deeply-discharged ‘dead’ batteries

Unlike other brands, the Blue Smart IP22 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.

Blue Smart IP22 Charger 12Volt 12 Volt

The Blue Smart IP22 Charger is the new professional battery charger with built-in bluetooth.

Technical Data

Blue Smart Charger 12V, 1 output15 / 20 / 30A

Input voltage range (VAC) 180 – 265 VAC

Charge current, normal mode 15 / 20 / 30 A

Efficiency 93%

Charge current, NIGHT or LOW 7,5 / 10 / 15 A

Number of outputs 1

Order numberBlueSmtIP22 12/15(1)BlueSmtIP22 12/20(1)BlueSmtIP22 12/30(1)

Price excluding VAT15 - R2 01220 - R2 40630 - R2 874



Technical Data

Blue Smart Charger 12V, 3 outputs15 / 20 / 30A


Charge current, normal mode 15 / 20 / 30 A

Efficiency 93%

Charge current, NIGHT or LOW 7,5 / 10 / 15 A

Number of outputs 3

Order number

BlueSmtIP22 12/15(3)BlueSmtIP22 12/20(3)BlueSmtIP22 12/30(3)

Price excluding VAT15: R2 29920: R2 72330: R3 268



Technical Data

Blue Smart Charger 24V, 1 output8 / 12 / 16A


Charge current, normal mode 8/12/15 A

Efficiency 94%

Charge current, NIGHT or LOW 4 / 6 / 8 A

Number of outputs 1

Order number

BlueSmtIP22 24/8(1)BlueSmtIP22 24/12(1)BlueSmtIP22 24/16(1)BlueSmtIP22 24/16(3)

Price excluding VAT

R2 012 R2 465 R2 949 R3 343

BUILD IN BLUETOOTH BUILD IN BLUETOOTH BUILD IN BLUETOOTH

Check the status of your battery remotelyThe Blue Smart IP22 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.

Recovery of deeply-discharged ‘dead’ batteriesUnlike other brands, the Blue Smart IP22 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.

Bluetooth SmartThe Blue Smart IP22 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available.High efficiencyWith up to 94% efficiency, these chargers generate up to four times less heat when com-pared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.Adaptive 6-stage charge algorithm: test - bulk – absorption - recondition – float – storageThe Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery manage-ment. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used.Storage Mode: less maintenance and aging when the battery is not in useThe storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature preventsstratification of the electrolyte and sulfation, a major cause of early battery failure.

Also charges Li-ion (LiFePO₄) batteriesLiFePO₄ batteries are charged with a simple bulk – absorption – float algorithm.NIGHT and LOW settingWhen in NIGHT or LOW mode, the output current is reduced to max. 50% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually.Protected against overheatingOutput current will reduce as temperature increases up to 50°C, but the Blue Smart Char-ger will not fail.Eleven LEDs for status indicationCharge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY.MODE button to set: NORMAL (14,4V) / HIGH (14,7V) / RECONDITION / LI-ION.



Technical Data

Blue Smart Charger 24V, 3 outputs 16A


Charge current, normal mode 8/12/16 A

Efficiency 94%

Charge current, NIGHT or LOW 4 / 6 / 8 A

Number of outputs 3

Order number BlueSmtIP22 24/16(1)


BUILD IN BLUETOOTH

visit website for full spec and download on the BlueSmart IP22 Chargers

Blue Smart IP67 Charger WaterproofThe Blue Smart IP67 Waterproof Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP67 Waterproof Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.

Blue Smart IP67 Charger Waterproof

12 Volt

The Blue Smart IP67 Waterproof Charger is the new professional battery charger with built-in bluetooth.

Technical Data

Blue Smart IP67 Charger 12/712/13

Input voltage range (VAC) 180-265VAC

Charge current, LOW 2A

Charge current normal 7A

Charge algorith 5 stage adaptive

Can be used as power supply yes

Order number

BlueSmtIP67 12/7(1)BlueSmtIP67 12/13(1)

Price excluding VAT R1 589R1 876

Blue Smart IP67 Charger Waterproof12 Volt


Blue Smart IP67 Charger Waterproof24 Volt


Technical Data

Blue Smart IP67 Charger 12/1712/25






Order number

BlueSmart IP67 12/17BlueSmtIP67 12/25(1)BlueSmtIP67 12/25 Si

Price excluding VATR2 058R2 677R3 116

BUILD IN BLUETOOTH BUILD IN BLUETOOTH BUILD IN BLUETOOTH

visit website for full spec and download on the BlueSmart IP67 Chargers

Technical Data

Blue Smart IP67 Charger24/524/8

24/12






Order number

BlueSmtIP67 24/5(1)BlueSmart IP67 24/8BlueSmtIP67 24/12 Si

Price excluding VAT5 - R1 5898 - R2 05812 - R3 116

visit website for full spec and download on the BluePower IP67 Chargers

* Water, dust and chemical resistant

* Seven step smart charge algorithm

* Recovery of fully dis-charged ‘dead’ batteries

* Automatic power supply function

* Severe cold performance: down to -30°C

* Several other battery life enhancing features

* Low power mode to charge smaller batteries

* Li-ion battery mode* Setup and configure, read-

out of voltage and current-by Bluetooth Smart

BUILD IN BLUETOOTH BUILD IN BLUETOOTH

Blue Smart IP65 Charger 4-7A12 Volt

The Blue Smart IP65 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.

Technical Data

Blue Smart IP65 Charger 12 V 4/5/7 A

Input voltage range (VAC) 100-130 VAC

Efficiency 94%

Standby power consumption 0,5 W

Can be used as power supply Yes

Order numberBlueSmart IP65 12/4 BlueSmart IP65 12/5 BlueSmart IP65 12/7


Blue Smart IP65 Charger24 Volt


Technical Data

Blue Smart IP65 Charger 24 V 5/8 A


Efficiency 95%

Standby power consump-tion 0,5 W

Charge current 5 / 8 A

Low current mode 2 / 3 A


Order number BlueSmart IP65 24

Price excluding VAT5 - R1 664 8 - R2 268

24-13 - R3 025

Blue Smart IP65 Charger 10 & 15A12 Volt

The Blue Smart IP65 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.

Technical Data

Blue Smart IP65 Charger 12 V 10/15A


Efficiency 94%

Standby power consumption 0,5 W


Order numberBlueSmtIP65 12/10BlueSmtIP65 12/15BlueSmtIP65 12/25

Price excluding VATR1 966R2 268R3 025

BUILD IN BLUETOOTH

Automotive IP65 Charger6 / 12 Volt

Depending on the application, clamps, eyelets or a cigarette plug (all included) can be connected to the charger.

Low power charger for 6V and 12V batteries: IP65 Charger 6V/12V-1,1A

Charger for 12V batteries with two charge current options: IP65 Charger 12V/4A – 12V/0,8A

Automotive IP65 Charger

Input voltage range 200-265 V

Frequency 50/60Hz

Charge voltage 7,2 or 14,4 V

Battery capacity range 1,2 Ah – 30 Ah

Charge current 1,1 A max.

Can be used as power supply No (output relay)

Back current drain 3 Ah/month (4 mA)

Order number AutomotiveIP65 6/12V AutomotiveIP65 12V

Price excluding VAT R604 R711

visit website for full spec and download on the BluePower IP65 Chargers

Blue Smart IP65 Charger

Accessories for the Blue Power IP65 Charger Order number Price excluding VAT

M6 eyelet connector (with 30A ATO fuse) M6 eyelet connector R90


2 meter extension cable 2 Meter ext cable R121

12 Volt plug (cigarette plug with 16A fuse) 12 Volt Plug R197

Clamp connector (with 30A ATO fuse) Clamp connector R182

Battery indicator panel (M8 eyelet connector/30A ATO) BatteryIndicatePanel R318

Battery indicator panel (M8 eyelet / 30A ATO Fuse) BatteryIndicateyelet R197

Rubber bumber for IP65 Charger 12/10, 12/15, 24/8 Rubber Bumber R90

Wall Mount for IP65 Charger 12/10,12/15,24/8 WallM/E IP65 R76

Carry case for Blue Smart IP65 Charger and Accessories Case for BPC R363

MagCode Power Clip 12V(max 15A) MagCode Power Clip R604

MagCode Power Port 12V(max 15A) MagCode Power Port R604

Wall Mount for IP65 Charger 12/10,12/15,24/8

Rubber bumber for IP65 Charger 12/10, 12/15, 24/8

Battery indicator panel

Order number: Smartbatterysense

Price excluding VAT: R453

Smart Battery protectThe Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

When using Bluetooth to program the Smart BatteryProtect any required engage/disengage levels can be set.

Alternatively, one of nine predefined engage/disengage levels can be set with the programming pin (see manual).

If required, Bluetooth can be disabled. Accessories for the Blue Power IP65 Charger Order number Price excluding VAT

Smart BatteryProtect 12/24V 65A Smart BP-65 R 924

Smart BatteryProtect 12/24V-100A Smart BP-100 R1,210


Smart BatteryProtect 48V-100A Smart BP-48/100 R2,345

Battery ProtectorsBattery protectors are responsible for disconnecting your loads before the battery is flat. This prevents unnecessary damage to your battery. Other beneficial features include auto ranging which automatically detects system voltage, over voltage protection which prevents damage to sensitive loads and delayed alarm output and delayed load disconnect. To ensure the quality and longevity of your battery, equip it with a Victron Energy battery protector. We have a selection of products to choose from in order to accommodate your specific requirements.

BatteryProtect 48The BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

Technical Data

BatteryProtect 48-100

Maximum continuous load current 100A

Peak current 250A

Operating voltage range 24 –64V

Current consumptionWhen on: 2 mA When

off or low voltage shutdown : 0,8 mA

Alarm output delay 12 seconds

Maximum load on alarm Output 50 mA (short circuit proof)

Order number BatteryProtect 48V



BatteryProtect 100The BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.Technical Data

BatteryProtect 65


Peak current 300A


Current consumption

When on: 1,5 mA When off or low

voltage shutdown : 0,6 mA


Maximum load on alarm Output

50 mA (short circuit proof)

Order number BatteryProtect-65A

Price excluding VAT R620

Technical Data

BatteryProtect 100


Peak current 600A


Current consumption

When on: 1,5 mA When off or low

voltage shutdown : 0,6 mA


Maximum load on alarm Output

50 mA (short circuit proof)




Technical Data

BatteryProtect 220


Peak current 600A


Current consumption When on: 1,5 mA When off or low voltage shutdown : 0,6 mA


Maximum load on alarm Output 50 mA (short circuit proof)


Price excluding VAT R1 497Order number: Battery Balancer

Price excluding VAT: R1 014

Battery BalancerThe Battery Balancer equalizes the state of charge of two series connected 12V batteries, or of several parallel strings of series connected batteries.

visit website for full spec and download on the Battery Protectors


Smart BatteryProtect 12/24V 65A Smart BP-65 R 924



Smart BatteryProtect 48V-100A Smart BP-48/100 R2,345

AutotransformerThe Autotransformer: for step up, step down and split phase balancingAn Autotransformer can be used for step up, step down and split phase output balancing purposes.

While the step up and step down functions are fairly straightforward, split phase output balancing may require some more attention.

Autotransformer 32AThe Autotransformer: for step up, step down and split phase balancingAn Autotransformer can be used for step up, step down and split phase output balancing purposes.While the step up and step down functions are fairly straightforward, split phase output balancing may require some more attention.

Autotransformer 100AThe Autotransformer: for step up, step down and split phase balancingAn Autotransformer can be used for step up, step down and split phase output balancing purposes.While the step up and step down functions are fairly straightforward, split phase output balancing may require some more attention.

The galvanic isolator consists internally of two diodes which are connected in anti-parallel fashion. When they are connected in this way, the diodes allow current in both directions but only above a certain threshold voltage. The voltage at which diodes conduct is about 1.4 Vdc.

Galvanic Isolator

Technical Data

Autotransformer VDI-16 VDI-32

Peak current 1600 A / 20 ms 1600 A / 20 ms

Max current 16 A 32 A

DimensionsH x W x D mm 60 x 120 x 200 63 x 164 x 235

Weight kg (lbs) 1 (2.2) 2 (4.4)

Order number Galvanic.Isol VDI-16 Galvanic.Isol VDI-32


visit website for full spec and download on the Autrotransformers

visit website for full spec and download on the Galvanic Isolators

Isolation Transformers 2000VA / 3600VA / 7000VA

Indispensable in professional marine energy systems. It prevents electrolytic corrosion and above all serves as a device to guarantee a safe electric system. Toroidal wound technology for quietness and high efficiency. Soft start circuitry will ensure that the shore circuit breaker will not trip when plugged in.

Isolation Transformers 2000VA Indispensable in professional marine energy systems. It prevents electrolytic corrosion and above all serves as a device to guarantee a safe electric system. Toroidal wound technology for quietness and high efficiency. Soft start circuitry will ensure that the shore circuit breaker will not trip when plugged in.

Technical Data

Isolation Transformers 2000 Watt (1)

Input 115 or 230 V

Output 115 or 230 V

Frequency 50/60Hz

Rating 17 / 8,5 A

Soft start Yes

Transformer type Toroidal (low noise, low weight)

Order number IsolationTrans2000


Isolation Transformers 3600VA Indispensable in professional marine energy systems. It prevents electrolytic corrosion and above all serves as a device to guarantee a safe electric system. Toroidal wound technology for quietness and high efficiency. Soft start circuitry will ensure that the shore circuit breaker will not trip when plugged in.

Technical Data

Isolation Transformers (3600) Watt (1)

Input 115 or 230 V

Output 115 or 230 V

Frequency 50/60Hz

Rating 32 / 16 A

Soft start Yes




Isolation Transformers 7000VA Indispensable in professional marine energy systems. It prevents electrolytic corrosion and above all serves as a device to guarantee a safe electric system. Toroidal wound technology for quietness and high efficiency.

Technical Data

Isolation Transformers 7000 Watt (1)

Input 230 V

Output 230 V

Frequency 50/60Hz

Rating 32 A

Soft start Yes




Victron Isolation Transformer 3600W 115/230V 32/16AThe isolation transformer eliminates any electrical continuity between AC shore power and the boat. It is essential for safety and eliminates the need for galvanic isolators and polarity alarms.Order number: IsolationTrans3600AU


visit website for full spec and download on the Isolation transformers

DC-DC convertersThe remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by for example the engine run/stop switch (see manual)..

Orion-Tr DC-DC Converters Isolated

12 / 24 / 48 VoltRemote on-offThe remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by for example the engine run/stop switch (see manual).

Adjustable output voltage: can also be used as a battery chargerFor example to charge a 12 Volt starter or accessory battery in an otherwise 24V system.

All models are short circuit proof and can be paralleled to increase output currentAn unlimited number of units can be connected in parallel.

Isolated converters110 – 120W

Orion-Tr12/12-9(110W)

Orion-Tr12/12-18(220W)

Orion-Tr12/12-30(360W)

Orion-Tr12/24-5(120W)

Orion-Tr12/24-10(240W)

Input voltage range 8-17V 8-17V 10-17V 8-17V 8-17V

Under voltage shut down 7V 7V 7V 7V 7V

Under voltage restart 7,5V 7,5V 7,5V 7,5V 7,5V

Nominal output voltage 12,2V 12,2V 12,2V 24,2V 24,2V

Output voltage adjust range 10-15V 10-15V 10-15V 20-30V 20-30V

Order number Orion-Tr 12/12-9A Orion-Tr 12/12-18A Orion-Tr 12/12-30A Orion-Tr 12/24-5A Orion-Tr 12/24-10A

Price excluding VAT R998 R1 800 R3 328 R998 R1 800

With galvanic isolation


Orion-Tr24/12-9(110W)

Orion-Tr24/12-20(240W)

Orion-Tr24/12-30(360W)

Orion-Tr24/24-5(120W)

Orion-Tr24/24-12(280W)

Orion-Tr24/24-17(400W)

Orion-Tr24/48-2,5

(120W)

Orion-Tr24/48-6(280W)

Orion-Tr24/48-8.5

(120W)

Input voltage range 16-35V 16-35V 20-35V 16-35V 16-35V 20-35V 16-35V 16-35V 20-35V

Under voltage shut down 14V 14V 14V 14V 14V 14V 14V 14V 14V

Under voltage restart 15V 15V 15V 15V 15V 15V 15V 15V 15V

Nominal output voltage 12,2V 12,2V 12,2V 24,2V 24,2V 24,2V 48,2V 48,2V 48,2V

Output voltage adjust range 10-15V 10-15V 10-15V 20-30V 20-30V 20-30V 40-60V 40-60V 40-60V

Order number Orion-Tr 24/12-9

Orion-TR 24/12-20A

Orion-Tr 24/12-30

Orion-Tr 24/24-5A

Orion-Tr 24/24-12A

Orion-Tr 24/24-17A

Orion-Tr 24/48-2,5A

Orion-Tr 24/48-6A

Orion-Tr 24/48-8.5A

Price excluding VAT R998 R1 800 R3 328 R998 R1 800 R3 328 R998 R1 800 R3 328


Orion-Tr 48/12-9A (110W)

Orion-Tr 48/12-20A

(240W)

Orion-TR 48/12-30A

(360W)

Orion-Tr 48/24-5A (120W)

Orion-TR 48/24-12A

(280W)

Orion-TR 48/24-16A

(380W)

Orion-Tr 48/48-2,5A

(120W)

Orion-Tr 48/48-6A (280W)

Orion-TR 48/48-8A (380W)

Input voltage range 16-35V 32-70V 40-70V 32-70V 32-70V 40-70V 32-70V 32-70V 40-70V

Under voltage shut down 14V 28V 28V 28V 28V 28V 28V 28V 28V

Under voltage restart 15V 30V 30V 30V 30V 30V 30V 30V 30V

Nominal output voltage 48,2V 12,2V 12,2V 24,2V 24,2V 24,2V 48,2V 48,2V 48,2V

Output voltage adjust range 40-60V 10-15V 10-15V 20-30V 20-30V 20-30V 40-60V 40-60V 40-60V

Order number Orion-Tr 48/12-9A

Orion-Tr 48/12-20A

Orion-Tr 48/12-30A

Orion-Tr 48/24-5A

Orion-Tr 48/24-12A

Orion-Tr 48/24-16A

Orion-Tr 48/48-2,5A

Orion-Tr 48/48-6A

Orion-Tr 48/48-8A

Price excluding VAT R998 R1 800 R3 328 R998 R1 800 R3 328 R998 R1 800 R3 328

12V

24V

48V

Orion-Tr DC-DC Converters Non-isolated24 Volt

DC-DC converters

The remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by the engine run/stop switch. All models with adjustable output can also be used as a battery charger, For example, to charge a 12 Volt starter or accessory battery in an otherwise 24V system. All models with adjustable output can be paralleled to increase output current

Up to five units can be connected in parallel.

Non isolatedconverters

ORI241224120 Orion-Tr Smart 24/12-20A 240W




Input voltage range 18-35V 20-35V 16-35V 20-35V

Output voltage 12.7V 14V 14V 14V

Efficiency 95% 97% 97% 97%

Order number Orion-Tr SM 24/12-20 Orion-Tr SM 24/12-30 Orion-Tr SM 24/24-12 Orion-Tr SM 24/24-17


Orion DC-DC Converters IsolatedWith galvanic isolation

Orion isolated 100W Orion isolated 360W






Power rating (W) 100W 200W 100W 200W

Galvanic isolation Yes Yes Yes Yes

V and A 12V/8.3A 12V/17A 12V/4.2A 12V/8.3A

Order number Orion-Tr SM 12/12-18 Orion-Tr SM 12/12-30 Orion-Tr SM 12/24-10 Orion-Tr SM 12/24-15


12 / 24 / 48 VoltRemote on-offThe remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by for example the engine run/stop switch (see manual).

12V

visit website for full spec and download on the Orion DC-DC Converters

Orion DC-DC Converters Non-isolated12 Volt

DC-DC converters

All models with adjustable output can also be used as a battery charger

For example to charge a 12 Volt starter or accessory battery in an otherwise 24 V system.

Non isolated converters Orion 12/24-8 Orion 12/24-10 Orion 12/24-20

Input voltage range 9-18 9-18 9-18

Undervoltage shutdown (V) 8 8 8

Undervoltage restart (V) 10 10 10

Output voltage (V) 24Adjustable

20-30VF set 26,4V

Adjustable20-30V

F set 26,4V

Efficiency 95% 95% 93%

Continuous output current 5A 10A 15A

Max. Output current 20 20 30

Order number Orion 12/24-8 Orion 12/24-10 Orion 12/24-20

Price excluding VAT R893 R1 090 R2 450

Non isolated converters Orion 24/12-25 Orion 24/12-70

Input voltage range 18-35 18-35

Undervoltage shutdown (V) 14 14

Undervoltage restart (V) 18 18

Output voltage (V)Adjustable

10–15VF set 13,2V

Adjustable10–15V

F set 13,2V

Efficiency 96 92

Continuous output current 25A 70A

Max. Output current 35 85

Order number Orion 24/12-25 Orion 24/12-70


Orion DC-DC Converters Non-isolated24 Volt

Easy to install

Delivery includes four Insulated Fastons Female Crimp 6.3 mm (eight Fastons in case of the Orion 24/12-40).


Orion DC-DC Converters Isolated, 360W15A

Isolated Converters

Isolated Converters Orion 110/24-15A (360W)

Power rating (W) 360

Galvanic isolation yes

Temperature increase after 30 minutes at full load (°C) 30

Fan assisted cooling(temp. controlled) yes

Order number Orion 110/24-360W



Remote on-off connector on the high power modelsThe remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by the engine run/stop switch.

All models with adjustable output can also be used as a battery chargerFor example to charge a 12 Volt starter or accessory battery in an other-wise 24 V system.

All models with adjustable output can be paralleled to increase the out-put current

Up to five units can be connected in parallel.

The Orion 12/27,6-12: a 24 V battery chargerTo charge a 24 V battery from a 12 V system. The output voltage of this model can be adjusted with a potentiometer

A super wide input range buck-boost regulator: the Orion 7-35/12-3The Orion 7-35/12-3 is an isolated converter with a very wide input range, suitable for both 12 V and 24 V systems, and a fixed 12,6 V out-put.

Easy to installDelivery includes four Insulated Fastons Female Crimp 6.3 mm (eight Fastons in case of the Orion 24/12-40).

Orion DC-DC Converters Isolated, 360W30A

Isolated Converters

Isolated Converters Orion 110/12-30A (360W)

Power rating (W) 360

Galvanic isolation yes

Temperature increase after 30 minutes at full load (°C) 30

Fan assisted cooling(temp. controlled) yes

Order number Orion 110/12-360W


Orion IP67 24/12 DC-DC Converters24 VoltWater, oil or dirt will not damage the Orion IP67 DC-DC Converter. The casing is made of cast aluminium and the electronics are moulded in resin.

Orion IP67 24/12-5

Input voltage range 15-40VDC

Under voltage shutdown 13V

Under voltage restart 14V

No load current at 24V 1mA

DC output voltage 12V +/- 3%

Maximum continuous output current 5A

Efficiency 93%

Order number Orion IP67 24/12-5


Orion IP67 24/12 DC-DC ConvertersWater, oil or dirt will not damage the Orion IP67 DC-DC Converter. The casing is made of cast aluminium and the electronics are moulded in resin.

Orion IP67 24/12-10







Efficiency 93%



24 Volt

Orion IP67 24/12 DC-DC ConvertersWater, oil or dirt will not damage the Orion IP67 DC-DC Converter. The casing is made of cast aluminium and the electronics are moulded in resin.

Orion IP67 24/12-20







Efficiency 95%



24 Volt

Orion IP67 25A DC-DC Converters12 Volt

DC-DC Converter for charging a 12/24V service battery in vehicles with an intelligent dynamo.

Orion IP67 50A DC-DC ConvertersDC-DC Converter for charging a 12/24V service battery in vehicles with an intelligent dynamo.

24 Volt

Buck-Boost DC-DC Converter

Buck-Boost DC-DC Converter 25A

Input voltage range 7-35V

Under voltage threshold 10V

Output voltage range 2-30V

Maximum charge current 12V : 25A 24V : 15A

Converter off, LEDs off (power save mode) 7 mA

‘On’ threshold voltage > 2V

Order number 25A Buck-Boost DC/DC


Buck-Boost DC-DC Converter

Buck-Boost DC-DC Converter 50A

Input voltage range 7-35V

Under voltage threshold 10V

Output voltage range 2-30V

Maximum charge current 12V : 50A 24V : 25A

Converter off, LEDs off (power save mode) 7 mA

‘On’ threshold voltage > 2V

Order number 50A Buck-Boost DC/DC


Not isolated, resin encapsulated Not isolated, resin encapsulated

Not isolated, resin encapsulated

100A Buck-BoostDC/DCR17 608

Battery monitorsThe essential function of a battery monitor is to calculate ampere hours consumed and the state of charge of a battery. Ampere hours consumed are calculated by integrating the current flowing in or out of the battery.

BMV-700 series BMV-702 series BMV-700H seriesBattery Monitor BMV-700

Supply voltage range 6,5 - 95 VDC

Current draw, back light off < 4mA

Input voltage range, auxiliary battery n. a

Battery capacity (Ah) 20 - 9999 Ah

Operating temperature range -40 +50°C (-40 - 120°F)

Measures voltage of second battery, ortemperature, or midpoint

No

Order number BMV-700


Battery Monitor BMV-702BMV-702 BLACK



Input voltage range, auxiliary battery 6,5 - 95 VDC




Yes

Order number BMV-702 BMV-702 BLACK


Battery Monitor

Battery Monitor BMV-700HS

Supply voltage range 60 – 385 VDC


Input voltage range, auxiliary battery n. a




No

Order number BMV-700H


BMV-712 Smart/BLACKBattery Monitor

Battery Monitor BMV-712 Smart



Input voltage range, auxiliary battery 6,5 - 70 VDC




Yes

Order number BMV-712

Order number BMV-712 BLACK Smart



Battery BalancerThe Battery Balancer equalizes the state of charge of two series connected 12V batteries, or of several parallel strings of series connected batteries.

Victron Battery Balancer

Input voltage range Up to 18V per bat-tery, 36V total

Turn on level 27,3V +/- 1%

Turn off level 26,6V +/- 1%

Current draw when off 0,7 mA

Order number Battery Balancer


Temperature sensor for BMV-702

Order number: Temperature sensor for BMV-702


BMV-710H smart

70 - 350 VDCR9 530.00 exclduing VAT

Lynx Shunt VE.CanThe Lynx Shunt VE.Can is an intelligent 1000A shunt with location for a fuse, the built in battery monitor accurately monitors the state of charge of your battery. Use the Color Control GX for reading out the information. Part of the modular Lynx distribution system.

Argo Diode Battery Combiner BCD 402

Maximum continuous current (A) 40

Number of batteries 2

Connection M6 bolts

Weight kg (lbs) 0,8 (1.8)

Order number BCD 402 2 BAT 40A


Order number: Lynx Shunt VE.Can Price excluding VAT: R5 324

A modular DC bus bar, used to connect batteries to the Lynx DC distribution system.Order number: Lynx Power In Price excluding VAT: R2 117

A modular DC bus bar, with locations for four DC fuses. It will monitor the status of each fuse, and indicate its condition with a LED on the front. Order number: Lynx Distributor Price excluding VAT: R3 177

Lynx Power In

Lynx Distributor

Victron VE Transfer Switch 5/10kVA 230VThe VE Transfer Switch has been designed to switch sensitive loads, such as computers or modern entertainment equipmentfrom one AC source to another.

The priority source typically is the mains, a generator or shore power.

Order number: VE.TransSwitch 5KVA


Argo Diode Battery CombinersDiode Battery Combiners are used to guarantee continuous DC power to mission critical equipment, such as an electronic engine control system. With a Diode Battery Combiner two or more DC power sources can be used in parallel to supply the mission critical load. Failure of one source will not interrupt power to the critical load.

Argo Diode Battery Combiner BCD 802

Maximum continuous current (A) 60

Number of batteries 2

Connection M6 bolts

Weight kg (lbs) 0,8 (1.8)

Order number BCD 802 2 BAT 80A


Argo Diode Battery IsolatorsDiode battery isolators allow simultaneous charging of two or more batteries from one alternator, without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery.

The Argo Battery Isolators feature a low voltage drop thanks to the use of Schottky diodes: at low current the voltage drop is approximately 0,3 V and at the rated output approximately 0,45 V. All models are fitted with a compensation diode that can be used to slightly increase the output voltage of the alternator. This compensates for the voltage drop over the diodes in the isolator. Please see our book ‘Energy Unlimited’ or ask for specialist advice when installing a diode isolator. Simply inserting the isolator in the cabling between the alternator and the batteries will slightly reduce charge voltage. The result can be that batteries are not charged to the full 100% and age prematurely.

Alternator energize inputSome alternators need DC voltage on the B+ output to start charging. Obviously, DC will be present when the alternator is directly connected to a battery. Inserting a Diode or FET splitter will however prevent any return voltage/current from the batteries to the B+, and the alternator will not start. The new ‘AC’ diode isolators feature a special current limited energize input that will power the B+ when theengine run/stop switch is closed.

Argo Diode Battery Isolator 80-2SC 80-2AC 100-3AC 120-2AC 140-3AC 180-3AC

Maximum charge current (A) 80 80 100 120 140 180

Maximum alternator current (A) 80 80 100 120 140 180

Number of batteries 2 2 3 2 3 3

Alternator Energize Input no yes yes yes yes yes

Connection M6 Studs M6 Studs M6 Studs M8 Studs M8 Studs M8 Studs

Compensation diode andEnergize connection

6,3 mmFaston

6,3 mmFaston

6,3 mmFaston

6,3 mmFaston

6,3 mmFaston

6,3 mmFaston

Weight kg (lbs) 0,5 (1.3) 0,6 (1.3) 0,8 (1.8) 0,8 (1.8) 1,1 (2.5) 1,5 (3.3)

Order number ARGO 80-2SC 2BAT 80A

ARGO 80-2AC 2BAT 80A

ARGO100-3AC-3BAT 100A

ARGO120-2AC2BAT 120A



Price excluding VAT R604 R771 R1 044 R1 165 R1 467 R1 694

Argo FET Battery IsolatorsSimilarly to diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less than 0,02 Volt at low current and averages 0,1 Volt at higher currents.

Argo FET Battery Isolator Argofet 100-2 Argofet 200-2 Argofet 200-3 Argofet 100-3 Three batteries 100A

Maximum charge current (A) 100 200 200 100

Maximum alternator current (A) 100 200 200 100

Number of batteries 2 2 3 3

Alternator Energize Input no no yes yes

Connection M8 bolts M8 bolts M8 bolts M8 bolts

Weight kg (lbs) 1,4 (3.1) 1,4 (3.1) 1,4 (3.1) 1,4 (3.1)

Order number ARGOFET100-2 2BAT100 ARGOFET200-2 2BAT200 ARGOFET200-3 3BAT200 ARGOFET100-3 3BAT100


Order number: Lynx Shunt VE.Can Price excluding VAT: R5 324

Microprocessor controlled battery combiner/isolators The Cyrix Battery Combiner is a microprocessor controlled heavy duty relay that automatically connects batteries in parallel when one of them has reached a pre-set voltage (indicating that the battery is being charged), and disconnects when the voltage decreases below float level (indicating that one or more batteries are being discharged). Cyrix Battery Combiners are an excellent replacement for diode isolators. The main feature is that there is virtually no voltage loss so that the output voltage of alternators or battery chargers does not need to be increased.

LED status indicator

Cyrix-ct 12/24V-120A Battery combiner kitCable and lugs included- 6mtr RED 10mm2 cable- 0.5mtr BLACK 10mm2 cable- 0.2mtr BLACK 1.5mm2 cable assembly with M2 lug and 6.3mm fast on terminal- 2pcs M8 cable lug with insulation sleeve- 4pcs M6 cable lug with insulation sleeve- 4pcs cable tie 150mmOrder number:


visit website for full spec and download on the Cyrix battery combinder

Cyrix-ct 12/24V-230A intelligent combinerThe Cyrix Battery Combiner is a microprocessor controlled heavy duty relay that automatically connects batteries in parallel when one of them has reached a pre-set voltage (indicating that the battery is being charged), and disconnects when the voltage decreases below float level (indicating that one or more batteries are being discharged).

Cyrix-Li-ct 12/24-230 12 V system 24 V system

Continuous current and breakingcapacity at 12 V or 24 V

230 A

Breaking capacity at 48 V n. a.

LED status indication Yes

Control cable Included (length 1 meter)

Order number Cyrix-ct 12/24-230A



Cyrix-Li-ct 12/24-120 12 V system 24 V system


120 A




Order number Cyrix-ct 12/24v-120A Cyrix-ct 12/24v-120Akit

Price excluding VAT R681R1 362


Cyrix-Li-ct 12/24-400 12 V 24 V


400 A




Order number Cyrix-i 12/24V-400A



Cyrix-Li-ct 12/24-400 24V 48V


400 A




Order number Cyrix-i 24/48v-400A


Cyrix-i 24/48 V 400 A

Cyrix-Li-ct Battery combiner

Cyrix Battery Combiner Cyrix-Li-load 12/24-120Cyrix-Li-load 24/48-120

Cyrix-Li-Charge 12/24-120Cyrix-Li-Charge 24/48-120

Cyrix-Li-ct 12/24-120 combiner

12V system 24V system

Continuous current and breakingcapacity at 12V or 24V 120A 120A 120A

Breaking capacity at 48V 40A 40A n. a.

Control input The Cyrix engages when the control input is high (appr. Battery voltage)The Cyrix disengages when the control input is left free floating or pulled low

Connect voltage - 13,7V / 27,4V / 54,8V13,4V < V < 13,7V: 120 s13,7V < V < 13,9V: 30 s

V > 13,9V: 4 s

26,8V < V < 27,4V: 120 s27,4V < V < 27,8V: 30 s

V > 27,8V: 4 s

Disconnect voltage - - 13,3V < V < 13,2V: 10 sV < 13,2V: immediate

26,6V < V < 26,4V: 10 sV < 26,4V: immediate

Order number

Price excluding VAT R998R998

R1 165R1 165 R1 165

Cyrix-Li-ct 12/24-120

Cyrix Battery Combiner Cyrix-Li-load 12/24-230Cyrix-Li-load 24/48-230

Cyrix-Li-Charge 12/24-230Cyrix-Li-Charge 24/48-230

Cyrix-Li-ct 12/24-230

12V system 24V system

Continuous current and breakingcapacity at 12V or 24V 230 A 230 A 230 A

Breaking capacity at 48V 80 A 80 A n. a.



Control input The Cyrix engages when the control input is high (appr. Battery voltage)The Cyrix disengages when the control input is left free floating or pulled low

Connect voltage - 13,7 V / 27,4 V / 54,8 V 13,4V < V < 13,7V: 120 s13,7V < V < 13,9V: 30 s

V > 13,9V: 4 s

26,8V < V < 27,4V: 120 s27,4V < V < 27,8V: 30 s

V > 27,8V: 4 s

Disconnect voltage - - 13,3V < V < 13,2V: 10 sV < 13,2V: immediate

26,6V < V < 26,4V: 10 sV < 26,4V: immediate

Order number


R2 496R2 496 R2 496

Battery Management System 12/200A 12V BMS that protects the alternator (and wiring), and supplies up to 200A in any DC load (including inverters and inverter/chargers).

BMS 12/200 specification

Maximum number of 12,8V batteries 10

Maximum charge current, Power Port AB 80A @ 40°C

Maximum charge current, Power Port LB 200A @ 40°C

No load current when operating 10mA

Order number

Price excluding VAT ON REQUEST

DIN-Rail adapterADA500180100 DIN35 Adapter Large (2 PCS) R333

ADA500140100 DIN35 Adapter Medium (2 PCS) R302

ADA500100100 DIN35 Adapter Small (2 PCS) R272

Cables / Fuses and connectors

Order number: VE.DirectCable0.3 VE.DirectCable10RAPrice excluding VAT: R227 R348

VE.Direct Cable

Non inverting remote on-off cable

Order number: VE.DirectNonInvertR


VE.Direct Cable

VE.Bus BMS to BMS 12-200 alternator control cableOrder number: VE.BusBMStoBMS


Peak Power Pack PPP-20 PPP-30 PPP-40

Capacity 20Ah 30Ah 40Ah

Stored energy 256Wh 384Wh 512Wh

Battery type Lithium-ion (LiFePO4)

Nominal voltage 12.8V

Order number Peak Power Pack 20Ah

Peak Power Pack 30Ah

Peak Power Pack 40Ah


The Peak Power Pack is a complete substitute for heavy lead acid batteries in applications where high currents occur for short time. Being primarily meant for caravan movers, it is equipped with a built in charger allowing charging from the car electrical system during the travel with the caravan. This way the pack will be fully charged upon arrival to the camping site. If necessary, the charging is possible using the supplied adapter via a grid outlet. Charging from a solar panel is also possible.

Peak Power Pack

SOLAR CABLESSolar Cable (4 mm²) with pre-assembled male and female MC4 (PVST01) connectors

M8 Connector Order Code Price

Length 1 m R151

Length 3 m R227

Length 5 m R333

M8 Connector Order Code Price

Length 1 m R182

Length 3 m R272

Length 5 m R409

Length 10 m R620

Length 20 m R1,149

Solar Cable (4 mm²) Solar Cable (6 mm²)

Solar adapter cable MC4 male to MC3 female, length 15 cm

Solar adapter cable MC4 female to MC3 male, length 15 cm

Order number: Price on request Price excluding VAT: R151

Order number: Price on requestPrice excluding VAT: R151

Solar splitter pair MC4-Y, 1x M-2F / 1x F-2M

Order number: Price on request VAT: R394

Solar connector pair MC4, 1x Male / 1x Female

Order number: Price excluding VAT: R136

Accessories for the Blue Power IP65 Charger

BluePower IP65 ACCESSORIES Order Code Price

Clamp connector (with 30A ATO fuse)

Clamp connector R182

visit website for full spec and download on the accessories



M8 eyelet connector (with 30A ATO fuse) 0 R90

2 meter extension cable 2 Meter ext cable R121

12 Volt plug (cigarette plug with 16A fuse) R197

Clamp connector (with 30A ATO fuse) Clamp connector R182

Battery indicator panel (M8 eyelet connector/30A ATO)

0 R318

Battery indicator panel (M8 eyelet / 30A ATO Fuse)

0 R197

Rubber bumber for IP65 Charger 12/10, 12/15, 24/8

R90

Wall Mount for IP65 Charger 12/10,12/15,24/8 R76

Fuses FUSE PRICE/EACH

MIDI-fuse 60A/32V (package of 5 pcs) R182








MIDI-fuse 60A/58V for 48V products (1 pc) R227


MIDI-fuse 100A/58V for 48V products (1 pc) R227

Fuse holder for MIDI-fuse R136

MEGA-fuse 60A/32V (package of 5 pcs) R45












MEGA-fuse 125A/58V for 48V products (1 pc) R453




Fuse holder for MEGA-fuse R182

Modular fuse holder for Mega-fuse R545

Six-way fuse holder for Mega-fuse with busbar(250A) R469

Busbar to connect 5 CIP100200100 (500 A) R589

Busbar to connect 6 CIP100200100 (1500 A) R681

ANL-fuse 300A/80V for 48V products (1 pc) R151



Fuse holder for ANL-fuse R151

Color Control GXPanels and system monitoringThe Color Control GX is the communication-centre of your installation. It offers at-a-glance live information, and lets you control all products connected to it. Full system control is gained - almost anywhere in the world - by accessing your Color Control GX using our free-to-use Victron Remote Management Portal

Order number: COLOUR CONTROL GX Price excluding VAT: R7 957

Order number: VENUS GX Price excluding VAT: R4 538

The Venus GX is the communication-centre of your installation. Venus allows you to talk to all components in your system and ensure they are working in harmony. Monitoring of live data, and changing settings is performed by using your smartphone (or other device) via our free-to-use Victron Remote Management Portal (VRM).

Venus GX

Temperature sensor VENUS/PMP/QuattroVictron Energy temperature sensor for Venux GX, Phoenix MultiPlus and QuattroOrder number: Price excluding VAT: R379

CCGX WiFi module simpleVictron Energy CCGX WiFi module simple (Nano USB)Order number: CCGX WIFI SimplePrice excluding VAT: R348

CCGX WiFi module long range

Victron Energy CCGX WiFi module simple (Nano USB)Order number: CCGX WIFI L/R


VE.Net

VE.Net GMDSS Panel Order number: VE.Net GMDSS Panel


Anti-islanding relay UFRThe UFR1001E monitors voltage and frequency in plants for own generation of electricity.Order number: Anti-island relayUFR


VE.Net Blue Power Panel 2 Order number: VE.NetBluePowPanel2

Price excluding VAT: price on request

GlobalLink 520GlobalLink 520 (incl. 5 year activated simcard)

Price excluding VAT: price on request

VE.Net

VE.Net Battery Controller (VBC) 12/24/48V

VE.Net Battery Controller 70-350V

Shunt 500A/50mV Shunt 1000A/50mV

Shunt 6000A/50mV VE.Net Tank Monitor (Resistive)

VE.Can resistive tank sender adapter

Order number: VE.NetBatCon(VBC)

Price excluding VAT: Price on request

Order number: VE.NetBatCon(VBC) VE.NetBat-Con(VBC)

Price excluding VAT: Price on request

Order number: Shunt 500A/50mV

Price excluding VAT: R499.00




Price excluding VAT: R4 538Order number: VE.Net Tank Mon(Res) Price excluding VAT: Price on request

Order number:


The UFR1001E monitors voltage and frequency in plants for own generation of electricity.

The VE.Can resistive tank sender adapter allows a standard resistive tank level sender to connect to the Color Control GX. It is compatible with both European standard 0-180 Ohm and United States standard 240-30 Ohm tank level senders and is accurate to ±1%. It is easily configurable to resistive senders from fuel, fresh water, waste water, well water, oil and black water (sewage) tanks. It supports up to 16 tanks of each type. The unit is a simple setup with two small rotary switches and it gets its power from the VE.Can network.

Digital Multi Control 200/200A

Order number: DigitalMultiControl


Digital Multi Control 200/200A GX

Order number: DigitalMultiConGX


Phoenix Charger Control

Order number: PhoenixCharControl


Phoenix Inverter Control VE.Direct

Order number: PhoenixInvCont VE.D


Skylla-i Control GX

Order number:


Charger Switch

Order number: Charger Switch


VE.Direct LoRaWAN EU863-870 module

Order number: VE.Direct LoRaWANMOD


VE.Direct LoRaWAN US902.928 module

Order number:


VE.Direct LoRaWAN AU902.928 module

Order number:


VE.Direct LoRaWAN module. It allows you to connect other Victron equipment, such as your Battery Monitor (BMV); Solar Charger; or Phoenix Inverter, to the Victron Remote Management (VRM Portal) portal. The portal is available to use free of charge, and from it you can view the status of your installation from anywhere in the world using your desktop device or mobile phone.

VE.Direct LoRaWAN

CANvu GX

Wall mount enclosure for 65 x 120 mm GX-panelswith 90 degr. RJ45 socket only:- BPA000100000R - Battery Alarm GX- REC000300000R - Skylla-i Control GX (90º RJ45)- DMC000200000R - Digital Multi Control 200/200A GX (90º RJ45)

Wall mount enclosure for Color Control GX

Wall mount enclosure for BMV or MPPT Control

Order number: CANvu GX CANvu GX IO

Price excluding VAT: R10 786 R2 587

Order number: Wall M/E GX-Panels

Price excluding VAT: R394.00

Order number: Wall M/E for C C

Price excluding VAT: R1 058.00

Order number: Wall M/E BMV


Wall mount enclosure for Color Control GX & BMV

USB extension cable 0.3m one side right angle

Order number: Wall M/E CC & BMV


Order number: USB Ext cable 0.3m


The CANvu GX is a product in the Victron GX Product Family.

DATA CABLES and INTERFACESNetwork cables for ESP System and BMV-600 and BMV-700

Cable Order Number Price excuding VAT

RJ12 UTP Cable 0,9 m RJ12 UTP CABLE 0.9M* R121

RJ12 UTP Cable 5 m RJ12 UTP CABLE 5M* R182




RJ45 UTP Cable 0,3 m RJ45UTPCABLE 0.3M** R121

RJ45 UTP Cable 0,9 m RJ45UTPCABLE0.9M** R121

RJ45 UTP Cable 1,8 m RJ45UTPCABLE1.8M** R151

RJ45 UTP Cable 3 m RJ45UTPCABLE3M** R182




Network cables for VE.Can, VE.Bus, VE.Net and VE9bitRS485

VE.Direct cables, use to connect BMV-70x and low power MPPTs to the Color Control GX


VE.Direct Cable 0,9m R227

VE.Direct Cable 1,8m VE.Direct Cable 1.8m R227

VE.Direct Cable 3m R256

VE.Direct Cable 5m VE.Direct Cable 5m R287

VE.Direct Cable 10m VE.Direct Cable 10M R348

VE.Direct Cable 0,3m (one side Right Angle conn)

VE.DirectCable0.3 R227


VE.DirectCable0.9RA R227


VE.DirectCable1.8RA R227

VE.Direct Cable 3m (one side Right Angle conn)

VE.DirectCable3RA R256





VE.Can to CAN-bus BMS type A Cable 1.8m R243

VE.Can to CAN-bus BMS type A Cable 5m R243

VE.Can to CAN-bus BMS type B Cable 1.8m R243

VE.Can to CAN-bus BMS type B Cable 5m R243

Cables with M8 circular connector (for 12.8V Li-ion batteries)


Male to Female 3 pole 1 m (bag of 2) Male/Female3pole1m R530




Interfaces to connect Victron products to your computer


VE.Direct to USB interface VE.Direct to USB R438

Interface MK2-USB (VE.Bus to USB) MK2-USB R1,134

Interface MK3-USB (VE.Bus to USB) MK3-USB R1,059

Interfaces to connect Victron products to NMEA2000


VE.Direct to NMEA2000 interface VE.DirectNMEA2000 R3 312

Maxi GXPanels and system monitoringOrder number: Maxi GX


The Maxi GX is a member of the GX Product family. The GX-device lies at the heart of the system - providing monitoring, and operating as the communication-centre of your installation.

Compared to the other GX devices, the Maxi GX has most CPU power and most VE.Direct ports: 25. This is the GX device to use for large systems with many VE.Direct MPPT Solar Chargers.

GX Touch 50 adapter for CCGX cut-outOrder number: GX Touch 50 adapter for CCGX cut-out

Price excluding VAT: R 379

Cables with M8 circular connector (for 12.8V Li-ion batteries)

Interfaces to connect Victron products to your computer

Interfaces for industrial use / datacommunication


RS232 to USB converter RS232 to USB R469VE.Direct to RS232 interface VE.Direct to RS232 R438

Interfaces to connect Victron products to each other

Miscellaneous Order Number Price excuding VAT

VE.Can Power Cable VE.CanPowerCable R604

AC Current sensor AC Current Sensor R756

VE.Direct Bluetooth Smart dongle


VE.Direct Bluetooth Smart dongle VE.DirectBluetooth R756

VE.Bus Smart dongle R1 210

Ziehl anti-islanding relaysCable Order Number Price excuding VAT

Anti-islanding relay UFR1001E Anti-island relayUFR R12 102

Anti-islanding relay SPI1021 Price on request


VE.Can RJ45 terminator (bag of 2) VE.Can RJ45 term R151

VE.Bus to VE.Can interface VE.Bus to VE.Can R3 025

Non-InvertRemote on off cable Non-InvertRemote R302

VE.Direct non inverting remote on-off cable

VE.DirectNonInvertR R302

VE.Bus BMS to BMS 12-200 alternator control cable

VE.BusBMStoBMS R530

Skylla-i remote on-off cable Skylla-i Remote R530

Maxi GXPanels and system monitoring

GX Touch 50 adapter for CCGX cut-out


GX Touch 50 Wall mount R227

GX Tank R1 513

GX Touch 50 Wall mount

SHORE CABLES: Shore Power Cords with Shore Power Organiser Bag Cable Order Number Price excuding VAT

Shore Power Cord 15m 16A ShorePowCord 15M 16A R2,268

Shore Power Cord 25m 16A ShorePowCord 25m 16A R3,087

Shore Power Cord 15m 25A ShorePowCord 15M 25A R2,920

Shore Power Cord 25m 32A ShorePowCord 25m 32A R5,703


Power Inlet 16A polyamid wth cover Power Inlet 16A poly R878

Power Inlet 16A stainless steel with cover Power Inlet 16A R1,270

Power Inlet 32A stainless steel with cover Power Inlet 32A R1,679

Plug 16A/250Vac (2p/3w) for Power Inlet 16A PLUG 16A/250VAC R1,014

Plug 32A/250Vac (2p/3w) for Power Inlet 32A PLUG 32A /250VAC R1,377


Adapter Cord 16A/250V Schuko/CEE ADAPTCORD16A/250ASCH R318

Adapter Cord 16A/250V CEE/Schuko ADAPTCORD16A/250CEE R302

Splitter Cord 16A/250V CEE/2xCEE SPLITCORD16A/250VCEE R1,029

Adapter Cord 16A to 32A/250V CEE/CEE ADAPTCORD16A to 32A R453

Adapter Cord 32A 3 phase to single phase ADAPTCORD32A R620

12V AND 24V INVERTERS: ALTERNATIVE OUTLETSOutlet Price

Phoenix 12/250 VE.Direct IEC R1,452


Phoenix 12/500 VE.Direct IEC on request

Phoenix 12/800 IEC outlet R4,236





Phoenix 48/250 VE.Direct IEC R1694

Phoenix 48/375 VE.Direct IEC R2 117

Phoenix 48/1200 IEC outlet R6 655

GX GSM - Modem accessory for Venus-devices

Order number: GX GSM 900/2100


Octo GXThe Octo GX is the communication-centre of your installation. It connects the components together and ensures they are working in harmony. Monitoring of live data, and changing settings is performed by using your smartphone (or other device) via our free-to-use Victron Remote Management Portal, VRM.

The Octo GX is a member of the GX Product family. The Octo GX is the best fit for installations that have many MPPT Solar Chargers, as it has 10 VE.Direct ports.

Order number: Octo GX


Order number: GX GSM 850/1900


Being an accessory for Venus-devices, the GX GSM is a member of the GX Product family. It is a cellular modem; pro-viding a mobile internet for the system and connection to the VRM Portal.

Modem & GPS accessory for GX devicesGX LTE 4G-E Price excluding VAT: R3 781.00 GX LTE 4G-A Price excluding VAT: R3 781.00 GX LTE 4G-SA Price excluding VAT: R3 781.00

SHORE CABLES: Shore Power Cords with Shore Power Organiser Bag

JHB: Tel: 011 462-4253 / Tel: 010 591-1713 , Fax: 011 462-4310KZN (Durban) : Tel: 031 569-2854, Fax: 031 569-2864

CPT (CapeTown): Tel: 021-300-1727, Fax: 021 300-1728 Mbombela: Tel: 013 004-0012, Fax: 013 004-0011 Tshwane: Tel: 012 763-9300, Fax: 011 462-4310

Contact us

The VRM appMonitor and manage your Victron Energy system. Login with your VRM account, and see all your sites in a list. Tap a site to see its system diagram, current system status and energy flow.


Energy meter ET112-1 phase - max 100A EnergyMeter 1Phase R1,149

Energy meter ET340 - 3 phase - max 65A/phase EnergyMeter 3Phase R2,268

Energy meter EM24 - 3 phase - max 65A/phase EnergyMeter3Phase EM R3,025

Energy meter EM24 - 3 phase - max 65A/phase Ethernet EnergyMeter3PhaseETN R3,706

RS485 to USB interface cable 1,8 m RS485 to USB 1.8m R423

RS485 to USB interface cable 5 m RS485 to USB 5m R484

Zigbee to RS485 converter Zigbee to RS485 R1,740

Zigbee to USB converter Zigbee to USB R1,513

Terms and Conditions1. Pricelist replaces and render invalid all previous prices2. Pricing applies to current exchange rate levels. Fluctuations may result in re-pricing3. Pricing as indicated is net and excludes VAT4. The content of this document is monitored in an ongoing manner and updated when necessary. Discrepancies may still arise and are subject to changes and errors. No guarantee is made for the completeness of these document. The information and descriptions are non-binding and are solely for informational purposes.5. Project specific pricing and larger order quantities available on request6. Standard payment and delivery terms apply

GX LTE 4G-E Price excluding VAT: R3 781.00 GX LTE 4G-A Price excluding VAT: R3 781.00 GX LTE 4G-SA Price excluding VAT: R3 781.00

inverter/chargers - rectifier

Documents