introduction to control systems: regulation and control system
TRANSCRIPT
![Page 1: Introduction to Control Systems: Regulation and Control System](https://reader035.vdocuments.site/reader035/viewer/2022062216/56649d975503460f94a801ea/html5/thumbnails/1.jpg)
Introduction to Control Systems:
Regulation and Control System
![Page 2: Introduction to Control Systems: Regulation and Control System](https://reader035.vdocuments.site/reader035/viewer/2022062216/56649d975503460f94a801ea/html5/thumbnails/2.jpg)
Basic Concepts Control System Examples Control System Design
![Page 3: Introduction to Control Systems: Regulation and Control System](https://reader035.vdocuments.site/reader035/viewer/2022062216/56649d975503460f94a801ea/html5/thumbnails/3.jpg)
January 11, 2005
3
Tornado Boeing 777
• Highly nonlinear, complicated dynamics!• Both are capable of transporting goods and people over long distances
BUT
• One is controlled, and the other is not.• Control is “the hidden technology that you meet every day”• It heavily relies on the notion of “feedback”
![Page 4: Introduction to Control Systems: Regulation and Control System](https://reader035.vdocuments.site/reader035/viewer/2022062216/56649d975503460f94a801ea/html5/thumbnails/4.jpg)
Control systems are an integral component of any industrial society and are necessary to provide useful economic products for society. Control engineering is based on the foundation of feedback theory and linear system analysis, and integrates the concepts of network theory and communication theory. Therefore, control engineering is not limited to any engineering discipline but is equally applicable for aeronautical, chemical, mechanical, environmental, civil, and electrical engineering. For example, quite often a control system includes electrical, mechanical, and chemical components.
![Page 5: Introduction to Control Systems: Regulation and Control System](https://reader035.vdocuments.site/reader035/viewer/2022062216/56649d975503460f94a801ea/html5/thumbnails/5.jpg)
System A collection of components which are coordinated
together to perform a function. Dynamic System
A system with a memory. For example, the input value at time t will influence
the output at future instant. A system interact with their environment through a
controlled boundary.
![Page 6: Introduction to Control Systems: Regulation and Control System](https://reader035.vdocuments.site/reader035/viewer/2022062216/56649d975503460f94a801ea/html5/thumbnails/6.jpg)
The interaction is defined in terms of variables.i. System inputii. System outputiii. Environmental disturbances
![Page 7: Introduction to Control Systems: Regulation and Control System](https://reader035.vdocuments.site/reader035/viewer/2022062216/56649d975503460f94a801ea/html5/thumbnails/7.jpg)
The system’s boundary depends upon the defined objective function of the system.
The system’s function is expressed in terms of measured output variables.
The system’s operation is manipulated through control input variables.
The system’s operation is also affected in an uncontrolled manner through disturbance input variables.
![Page 8: Introduction to Control Systems: Regulation and Control System](https://reader035.vdocuments.site/reader035/viewer/2022062216/56649d975503460f94a801ea/html5/thumbnails/8.jpg)
Control is the process of causing a system variable to conform to some desired value.
Manual control Automatic control (involving machines only).
A control system is an interconnection of components forming a system configuration that will provide a desired system response.
Control System
Output
Signal
Input Signa
l
Energy
Source
![Page 9: Introduction to Control Systems: Regulation and Control System](https://reader035.vdocuments.site/reader035/viewer/2022062216/56649d975503460f94a801ea/html5/thumbnails/9.jpg)
Control is a process of causing a system variable such as temperature or position to conform to some desired value or trajectory, called reference value or trajectory.
For example, driving a car implies controlling the vehicle to follow the desired path to arrive safely at a planned destination.i. If you are driving the car yourself, you are performing manual
control of the car.
ii. If you use design a machine, or use a computer to do it, then you have built an automatic control system.
![Page 10: Introduction to Control Systems: Regulation and Control System](https://reader035.vdocuments.site/reader035/viewer/2022062216/56649d975503460f94a801ea/html5/thumbnails/10.jpg)
Transient response: Gradual change of output from initial to the desired
condition Steady-state response:
Approximation to the desired response For example, consider an elevator rising from
ground to the 4th floor.
![Page 11: Introduction to Control Systems: Regulation and Control System](https://reader035.vdocuments.site/reader035/viewer/2022062216/56649d975503460f94a801ea/html5/thumbnails/11.jpg)
Component or process to be controlled can be represented by a block diagram.
The input-output relationship represents the cause and effect of the process.
Control systems can be classified into two categories:i. Open-loop control systemii. Closed-loop feedback control system
Process Output
Input
![Page 12: Introduction to Control Systems: Regulation and Control System](https://reader035.vdocuments.site/reader035/viewer/2022062216/56649d975503460f94a801ea/html5/thumbnails/12.jpg)
An open-loop control system utilizes an actuating device to control the process directly without using feedback.
A closed-loop feedback control system uses a measurement of the output and feedback of the output signal to compare it with the desired output or reference.
Actuating Device Process Output
Desired Output
Response
Desired Output
Response
Measurement
Output
Controller
ProcessComparison
Single Input Single Output (SISO) System
![Page 13: Introduction to Control Systems: Regulation and Control System](https://reader035.vdocuments.site/reader035/viewer/2022062216/56649d975503460f94a801ea/html5/thumbnails/13.jpg)
Open-Loop Control System
Missile Launcher System
![Page 14: Introduction to Control Systems: Regulation and Control System](https://reader035.vdocuments.site/reader035/viewer/2022062216/56649d975503460f94a801ea/html5/thumbnails/14.jpg)
Closed-Loop Feedback Control System
Missile Launcher System
![Page 15: Introduction to Control Systems: Regulation and Control System](https://reader035.vdocuments.site/reader035/viewer/2022062216/56649d975503460f94a801ea/html5/thumbnails/15.jpg)
Desired Output
Response
Measurement
Output Variabl
es
Controller
Process
Multi Input Multi Output (MIMO) System
![Page 16: Introduction to Control Systems: Regulation and Control System](https://reader035.vdocuments.site/reader035/viewer/2022062216/56649d975503460f94a801ea/html5/thumbnails/16.jpg)
Static or Dynamic Systems: Static systems are composed of simple linear gains or nonlinear devices and described by algebraic equations, and dynamic systems are described by differential or difference equations.
Continuous-time or Discrete-time Systems: Continuous-time dynamic systems are described by differential equations and discrete-time dynamic systems by difference equations.
![Page 17: Introduction to Control Systems: Regulation and Control System](https://reader035.vdocuments.site/reader035/viewer/2022062216/56649d975503460f94a801ea/html5/thumbnails/17.jpg)
i. Power Amplification (Gain) Positioning of a large radar antenna by low-power
rotation of a knob
ii. Remote Control Robotic arm used to pick up radioactive materials
iii. Convenience of Input Form Changing room temperature by thermostat position
iv. Compensation for Disturbances Controlling antenna position in the presence of large
wind disturbance torque
![Page 18: Introduction to Control Systems: Regulation and Control System](https://reader035.vdocuments.site/reader035/viewer/2022062216/56649d975503460f94a801ea/html5/thumbnails/18.jpg)
i. Ancient Greece (1 to 300 BC) Water float regulation, water clock, automatic oil lamp
ii. Cornellis Drebbel (17th century) Temperature control
iii. James Watt (18th century) Flyball governor
iv. Late 19th to mid 20th century Modern control theory
![Page 19: Introduction to Control Systems: Regulation and Control System](https://reader035.vdocuments.site/reader035/viewer/2022062216/56649d975503460f94a801ea/html5/thumbnails/19.jpg)
![Page 20: Introduction to Control Systems: Regulation and Control System](https://reader035.vdocuments.site/reader035/viewer/2022062216/56649d975503460f94a801ea/html5/thumbnails/20.jpg)
i. Pancreas Regulates blood glucose level
ii. Adrenaline Automatically generated to increase the heart rate and
oxygen in times of flightiii. Eye
Follow moving objectiv. Hand
Pick up an object and place it at a predetermined location
v. Temperature Regulated temperature of 36°C to 37°C
![Page 21: Introduction to Control Systems: Regulation and Control System](https://reader035.vdocuments.site/reader035/viewer/2022062216/56649d975503460f94a801ea/html5/thumbnails/21.jpg)
Figure shows a schematic diagram of temperature control of an electric furnace. The temperature in the electric furnace is measured by a thermometer, which is analog device. The analog temperature is converted to a digital temperature by an A/D converter. The digital temperature is fed to a controller through an interface. This digital temperature is compared with the programmed input temperature, and if there is any error , the controller sends out a signal to the heater, through an interface, amplifier and relay to bring the furnace temperature to a desired value.
![Page 22: Introduction to Control Systems: Regulation and Control System](https://reader035.vdocuments.site/reader035/viewer/2022062216/56649d975503460f94a801ea/html5/thumbnails/22.jpg)
Car and Driver
Objective: To control direction and speed of car Outputs: Actual direction and speed of car Control inputs: Road markings and speed signs Disturbances: Road surface and grade, wind, obstacles Possible subsystems: The car alone, power steering
system, breaking system
![Page 23: Introduction to Control Systems: Regulation and Control System](https://reader035.vdocuments.site/reader035/viewer/2022062216/56649d975503460f94a801ea/html5/thumbnails/23.jpg)
Functional block diagram:
Time response:
Measurement, visual and tactile
Measurement, visual and tactile
Steering Mechanism
Steering Mechanism Automobil
eAutomobil
eDriverDriver
Desired
course of
travel
Actual course
of travel
Error+
-
![Page 24: Introduction to Control Systems: Regulation and Control System](https://reader035.vdocuments.site/reader035/viewer/2022062216/56649d975503460f94a801ea/html5/thumbnails/24.jpg)
Consider using a radar to measure distance and velocity to autonomously maintain distance between vehicles.
Automotive: Engine regulation, active suspension, anti-lock breaking system (ABS)
Steering of missiles, planes, aircraft and ships at sear.
![Page 25: Introduction to Control Systems: Regulation and Control System](https://reader035.vdocuments.site/reader035/viewer/2022062216/56649d975503460f94a801ea/html5/thumbnails/25.jpg)
Control used to regulate level, pressure and pressure of refinery vessel.
For steel rolling mills, the position of rolls is controlled by the thickness of the steel coming off the finishing line.
Coordinated control system for a boiler-generator.
![Page 26: Introduction to Control Systems: Regulation and Control System](https://reader035.vdocuments.site/reader035/viewer/2022062216/56649d975503460f94a801ea/html5/thumbnails/26.jpg)
Consider a three-axis control system for inspecting individual semiconducting wafers with a highly sensitive camera
![Page 27: Introduction to Control Systems: Regulation and Control System](https://reader035.vdocuments.site/reader035/viewer/2022062216/56649d975503460f94a801ea/html5/thumbnails/27.jpg)
i. CD Players The position of the laser spot in relation to the
microscopic pits in a CD is controlled.
ii. Air-Conditioning System Uses thermostat and controls room temperature.
![Page 28: Introduction to Control Systems: Regulation and Control System](https://reader035.vdocuments.site/reader035/viewer/2022062216/56649d975503460f94a801ea/html5/thumbnails/28.jpg)
i. System, plant or process To be controlled
ii. Actuators Converts the control signal to a power signal
iii. Sensors Provides measurement of the system output
iv. Reference input Represents the desired output
![Page 29: Introduction to Control Systems: Regulation and Control System](https://reader035.vdocuments.site/reader035/viewer/2022062216/56649d975503460f94a801ea/html5/thumbnails/29.jpg)
SensorSensor
Actuator
Actuator
ProcessProcessController
Controller
++
Set-point or
Reference input
Actual Outpu
t
ErrorControll
ed Signal
Disturbance
Manipulated
Variable
Feedback Signal
+
-
++
![Page 30: Introduction to Control Systems: Regulation and Control System](https://reader035.vdocuments.site/reader035/viewer/2022062216/56649d975503460f94a801ea/html5/thumbnails/30.jpg)
January 11, 2005
30
Flight Control Systems Modern commercial and
military aircraft are “fly by wire”
Autoland systems, unmanned aerial vehicles (UAVs) are already in place
Robotics High accuracy positioning
for flexible manufacturing Remote environments:
space, sea, non-invasive surgery, etc.
Chemical Process Control Regulation of flow rates,
temperature, concentrations, etc.
Long time scales, but only crude models of process
Communications and Networks Amplifiers and repeaters Congestion control of the
Internet Power management for
wireless communications Automotive
Engine control, transmission control, cruise control, climate control, etc
Luxury sedans: 12 control devices in 1976, 42 in 1988, 67 in 1991
AND MANY MORE...
![Page 31: Introduction to Control Systems: Regulation and Control System](https://reader035.vdocuments.site/reader035/viewer/2022062216/56649d975503460f94a801ea/html5/thumbnails/31.jpg)
“The right half of the brain controls the left half of the body. This means that only left handed people are in their right mind…”