introduction to computer and network architectures (networks) module introduction

8
Introduction to Computer and Network Architectures (Networks) Module introduction

Upload: phillip-parrish

Post on 28-Dec-2015

216 views

Category:

Documents


3 download

TRANSCRIPT

Page 1: Introduction to Computer and Network Architectures (Networks) Module introduction

Introduction to Computer and Network Architectures (Networks)

Module introduction

Page 2: Introduction to Computer and Network Architectures (Networks) Module introduction

Staff Ivailo Chakarov- Module leader/tutor/Cisco

Academy Director/Part man/part labrador [email protected]

Page 3: Introduction to Computer and Network Architectures (Networks) Module introduction

Module contentNetwork fundamentals Routing concepts and protocols

Living in a network centric world Introduction to routing and packet forwarding

Communicating over the network Static routing

Application layer functionality and protocols

Introduction to dynamic routing protocols

OSI transport layer Distance vector routing protocols

OSI network layer Rip version 1

Addressing the network IPv4 VLSM and CIDR

Data link layer RIP version 2

OSI physical layer The routing table a closer look

Ethernet EIGRP

Planning and cabling networks Link state routing protocols

Configuring and testing your network OSPF

Page 4: Introduction to Computer and Network Architectures (Networks) Module introduction

Module assessment The assessment for Networks part of the

module is: Case Study (50%)

To pass the module you need to get an average of 40% overall and you must score a minimum of 40% for each independent assessment

Page 5: Introduction to Computer and Network Architectures (Networks) Module introduction

Module assessment Case Study

Completion of a case study in the form of a report Consists of 5 tasks

Task 1: Design Task 2: Configuration Task 3: Costing Task 4: Simulation Task 5: Report

Page 6: Introduction to Computer and Network Architectures (Networks) Module introduction

Tutorials You will be given specific tutorials to work

through These will help you to understand the material

from the lecture and put it into practical use The tutorials will help you gain the relevant

skills to complete the case study

Page 7: Introduction to Computer and Network Architectures (Networks) Module introduction

Effective learning The lectures give you the framework The tutorials let you put that framework into

practice In order to pass the module you need the

theoretical knowledge AND practical skills Time is short on the module so please ensure

that you attend ALL lectures and tutorials

Page 8: Introduction to Computer and Network Architectures (Networks) Module introduction

Questions... ...are there any?