interior equipment/shop fittings bar railing...

New products and systems: www.hafele.com

We reserve the right to alter specifications without notice (SEA Furniture Fittings 2012).

Interior Equipment/Shop FittingsBar Railing Systems

FF 11.52

11

Gallery railing system

Diameter mm Stainlesssteelcoloured

Brasscoloured

6 812.20.600 812.20.800

10 812.22.600 812.22.800

Gallery rail

• Material: Stainless steel, SUS 304

• Finish: Matt brushed or PVD coated brass coloured

• Length: 2,500 mm solid material

Gallery rail post

• Material: Zinc alloy

• Finish: PVD coated

• Diameter: 10 mm (for 6 mm rail) or 15 mm (for 10 mm rail)

For 1 rail For 2 rails

Gallery rail end post

with blind hole

Gallery rail centre post

with through hole

Press-in dowel

for wood

Threaded sleeve

for glass

For glue fixing

to glass

Packing: 1 pc.




FF 11.53

11

Gallery rail post for 1 rail 6 mm

Installation Stainless steelcoloured

Brasscoloured

With through hole as centre post

Press-in dowel 812.26.600 812.26.800

Threaded sleeve 812.26.601 812.26.801

For glue fixing 812.26.602 812.26.802

With blind hole as end post

Press-in dowel 812.26.620 812.26.820

Threaded sleeve 812.26.621 812.26.821

For glue fixing 812.26.622 812.26.822



Packing: 1 pc.


Brasscoloured


Press-in dowel 812.26.610 812.26.810

Threaded sleeve 812.26.611 812.26.811

For glue fixing 812.26.612 812.26.812


Press-in dowel 812.26.630 812.26.830

Threaded sleeve 812.26.631 812.26.831

For glue fixing 812.26.632 812.26.832

Packing: 1 pc.


Brasscoloured


Press-in dowel 812.27.600 812.27.800

Threaded sleeve 812.27.601 812.27.801

For glue fixing 812.27.602 812.27.802


Press-in dowel 812.27.620 812.27.820

Threaded sleeve 812.27.621 812.27.821

For glue fixing 812.27.622 812.27.822

Packing: 1 pc.



Brasscoloured


Press-in dowel 812.27.610 812.27.810

Threaded sleeve 812.27.611 812.27.811

For glue fixing 812.27.612 812.27.812


Press-in dowel 812.27.630 812.27.830

Threaded sleeve 812.27.631 812.27.831

For glue fixing 812.27.632 812.27.832

Packing: 1 pc.




FF 11.54

11

Support rings for 6 mm rail

• Area of application: For angled rail system or as design variant

• Materail: Zinc alloy

• Finish: PVD coated

Installation dimensions

Dim. A = Pitch length

Dim. B = Rail length

Dim. B = Dim. A-3 mm (one sided installation on gallery rail post)

1 180° for gallery rail end post

2 180° for gallery rail centre post

3 90° for gallery rail end post

4 135° for gallery rail centre post

Installation

Version Stainless steelcoloured

Brasscoloured

For 6 mm ra

180° for gallery rail centre post 812.27.860 812.26.860

180° for gallery rail end post 812.27.870 812.26.870



Dim. B = Dim. A+4 mm (two sided installation on gallery rail post)

Packing: 1 pc.




FF 11.55

11

Bar railing system

The multitude of components make this system extremely flexible

and usable almost anywhere.

A support bracket or holder has to

be mounted every 700 mm and at

a distance of 150 mm from each

end of the rail. Support brackets

or holders should be mounted at

both ends of elbow sections. The

rails can be screwed or glued to

the holders. Both methods provide

comparable stability, but glued

connections are permanent.

Installation information

There are many ways of fixing rails to wall,

floor and ceiling surfaces:

• Installation with railing support brackets

• Installation with handrail support brackets

• Installation with foot rail support brackets

• Direct fixing of rail ends to surfaces

interior equipment/shop fittings bar railing...

Documents