int erg ration between cad and cam

8/3/2019 Int Erg Ration Between CAD and CAM

1/18


2/18

CAD ( Computer Aided Design )Computer aided design or CAD is known as a

program used in helping making a design

mainly.

It is also one of the software or program that

used in manufacturing process.

CAM (Computer Aided Manufacturing)The CAM is a program that used to change the

design into code that used in machine and used

the data to transfer to the machine.


3/18


4/18

Identify the problem

Before starting a process of creation,

the idea must be there.

Ideas resulting from the problems

that have been identified.

Process


5/18

Research

Study of the problem.

Problem Solving

Various ways or method to solve theproblem.

Rough Sketch of Idea

Sketches that are not specific and does notinvolve the size and dimensions.


6/18

Designing

Produces a picture image of the product interms of height, width, length and others.

Manufacturing

Production process of a product using amachine.


7/18

CAD/CAM integration is regarded as asolution for bringing the gap between

design and manufacturing, one of theultimate goals for current engineering

The integration started with IGES file

translation and shop floor integration--while applying new developmentefforts toward integration with

established CAD systems.

Integration of CAD and CAM


8/18

The integration of CAD/CAM allow thedesigning and manufacturing process done in

one particular software.Its started with the designing with the use ofCAD.

The CAD in the integrated CAD/CAM is done in3D wireframe with the basic function just likein the other CAD software.

The CAD in the integrated software is usinggeometric data design. This is done so that thesoftware is easy to be generated.


9/18

In the integrated CAD/CAM the code is easy tobe generated because of the NC program

featured that already exist.

The CAD file that already been finish sketch isthen open with CAM so that it will use the NC

PROGRAM and generate the code.

Then CAM will adjust the usage of all the tooland the position of tool before sending the

code into the machine.

Once the code is ready, it will be send to themachine with either usb or inserting data.


10/18

The integration is actually the automatic

linking of previously discrete stage of

design and production processes


11/18

CAD


12/18

CAM


13/18

CAD produce the design (drawing ) for transfer tothe CAM.

This design will be converted into machine

language (code) so it can be read by the machine.This process also called NC programming.

-NC programming typically requires that thegeometry received from a CAD system, whetherin wireframe, surface or solid that are CAD phaseof geometry creation.

Manufacturing Result From CAD Can Be

Used In CAM


14/18

It is begin after the geometry creation from CADis attached into CAM.

CAM will convert into the language specific to themachines controller like G-code, M-code, N-code,L-code and etc.

Simulation of the cutting process can check afterdone with the code.

If there any mistaken to the code, the simulationprocess will not action well. Abort is use to editthose wrong code.


15/18


16/18

File with the commands and language specific forthat given machines control is ready to transfer tothe CNC for manufacturing the product.

This file can then be sent to the machine by avariety of methods. Some machines might use aUSB micro drive (USB stick), a floppy disk, serial(RS232 or RS422) cable interface, or a control

networked to the computer.


17/18

CAD/CAM solutions used by companies to speed up,streamline and increase the efficiency of their productionprocesses

Impact of ease of use

Short learning curveIntuitive operation

Easy to memorize

Adoption

Reliability

Adaptability

Accommodation

Benefit Of Integration Of CAD and CAM


18/18

int erg ration between cad and cam

Documents