installation instructions - rockauto · components, labor, personal injury, or any other damage or...

2
Dash Cover 1. Unroll your Dash Designs® dash cover and allow it to lie flat on your dashboard. Fold and crease your dash cover to conform to the contours of your dashboard while also aligning the vents and edges. Some dash covers require tucking between the windshield and dashboard to align properly. A plastic spatula works well. For carpet covers, spraying the surface with water will soſten the nap, making it easier to form. Desenrollar Dash Designs® hasta endecha plano en el tablero. Doble y pligue Dash Designs® hasta conforma al tablero. 2. Sensor Options: If your vehicle has a light sensor (for automatic headlights), a climate control sensor (for automatic temperature control), or other sensors, a hole may be cut on your dash cover. If it is not cut out, check for markings on the underside of the dash cover. Ensure these markings are aligned with the sensor and cut the opening using sharp scissors. Aline los respiaderos y bordes. Para los sensores, si no estan cortado, usa las tijeras y recórtelos. MONO: INSPECTION: SEWING: INSTALLATION INSTRUCTIONS Dedicated to Quality and Customer Satisfaction

Upload: others

Post on 28-Mar-2021

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: INSTALLATION INSTRUCTIONS - RockAuto · components, labor, personal injury, or any other damage or injury. ˛ is warranty is in lieu of any other expressed or implied warranties

Dash Cover

1. Unroll your Dash Designs® dash cover and allow it to lie � at on your dashboard. Fold and crease your dash cover to conform to the contours of your dashboard while also aligning the vents and edges. Some dash covers require tucking between the windshield and dashboard to align properly.

A plastic spatula works well. For carpet covers, spraying the surface with water will so� en the nap, making it easier to form.

Desenrollar Dash Designs® hasta endecha plano en el tablero. Doble y pligue Dash Designs® hasta conforma al tablero.

2. Sensor Options: If your vehicle has a light sensor (for automatic headlights), a climate control sensor (for automatic temperature control), or other sensors, a hole may be cut on your dash cover. If it is not cut out, check for markings on the underside of the dash cover. Ensure these markings are aligned with the sensor and cut the opening using sharp scissors.

Aline los respiaderos y bordes. Para los sensores, si no estan cortado, usa las tijeras y recórtelos.

MONO:

INSPECTION:

SEWING:

INSTALLATION INSTRUCTIONS

Dedicated to Quality and Customer Satisfaction

Page 2: INSTALLATION INSTRUCTIONS - RockAuto · components, labor, personal injury, or any other damage or injury. ˛ is warranty is in lieu of any other expressed or implied warranties

Passenger Airbag:Your Dash Designs® dash cover has been manufactured to allow for the proper deployment of the airbag safety system. Dash Designs® assumes no responsibility for incorrect installation of dash cover resulting in improper airbag deployment or damages incurred by not securing products to vehicle dash.

Radio Speakers:Dash Designs® uses porous fabric that does not impede sound and prevents light and harmful UV rays from reaching your dashboard surface.

WarrantyYour Dash Designs® dash cover is warrantied against defects and operation for 5 years, except for Carpet dash covers which carry a lifetime warranty. Return of warranty product must be accompanied with proof of sale or dated receipt, and returned freight prepaid to Dash Designs®, Attn: Warranty Dept., 615 W. Knox Rd., Tempe, AZ, 85284. In the event of failure, Dash Designs® shall either repair or replace your dash cover. Failure does not include damage due to improper handling during installation or normal usage. � is warranty does not cover other interior components, labor, personal injury, or any other damage or injury. � is warranty is in lieu of any other expressed or implied warranties.

If you have any questions about your installation, don’t hesitate to call us toll-free at:

1-800-843-3274 (The Dash)

3. Attaching Your Dash Cover. Clean the surface of your dashboard using either soap and water or the enclosed moist towelette. Cut the Velcro strip into 1/2” long pieces and position as necessary on your dashboard by removing the protective paper and pressing down into place.

Usa jabón y agua para limpiar el tablero. Corte el Velcro en 1/2” pedazos, quite el papel del Velcro y prensa sobre al tablero.