inserting tools for screwdriversd 3320 e 06.2010 inserting tools for screwdrivers bits sockets...

D 3320 E 06.2010

Inserting Tools for Screwdrivers

BitsSocketsFindersBit holders

With the longest lifetime and highest wearresistance combined with the best fits, ourinserting tools are designed for the industrialuse.

The large variety of this assortment combinesstandard inserts and inserts for special appli-

cations. If those cannot be used, we also offercustom made bits. Whatever fastener needsto be assembled, we have the right tool foryou. To achieve the utmost economical solutionin regard to wear, usage and price, DEPRAGwill support you with detailed advise andservice. Please don’t hesitate to ask us.

Screwdriving technology Automation Air motors Air tools

This brochure shows a small selection of in-serting tools available for our MICROMAT-/MINIMAT-screwdrivers.

You will find a much larger range of theseinserting tools on the Internet as follows:

www.deprag.com / Screwdriving Tech-nology / Selection program: Inserting Tools

This selection program is updated permanentlyand allows you to look for suitable insertingtools for your DEPRAG screwdriver yourself.

Simply pick the required parameters from theshown listing by mouse click and you will getthe respective part no. including an informationabout the lead time.

All you have to do now is to send an inquiryto [email protected] via e-mail and we willarrange to send you our related offer eitherdirectly or via our respective local represen-tative.

2

PRODUCT SPECTRUM INSERTING TOOLS

FIND A MUCH LARGER RANGE OF INSERTING TOOLS ON THE INTERNET

Inserting Tools Type of Screw find on

for MICROMAT-Screwdrivers

bits, finders slotted screws Page 3bits, finders, bit holders PHILLIPS and POZIDRIV screws Page 4bits, bit holders allen screws, torx screws and

threaded pins Page 4 / 5sockets with shaft hex. screws and hex. nuts Page 5semi-finished bits and finders, special bits – Page 5

for MINIMAT-, Recycling-, Slip clutch-, Pulse tools, Electric Screwdrivers

bits, finders, bit holders, special bits slotted screws Page 6 / 7bits, finders, bit holders PHILLIPS and POZIDRIV screws Page 8 / 9threaded bit tips, bit holder (threaded), semi-finished finders,special bits, adapters and chuck for stud screws Page 10 / 11threaded bit tips torx screws Page 10bits, bit holders allen screws, torx screws and

threaded pins Page 12 / 13

for SENSOMAT- and MINIMAT-T-Screwdrivers

sensor sleeves, bits slotted screws Page 14 / 15sensor sleeves, bits, bit holders PHILLIPS and POZIDRIV screws Page 14 / 15

for Ratchet wrench

sockets, holder hex. screws and hex. nuts Page 16

for MINIMAT-, Recycling-, Slip clutch-, Pulse tools, Electric Screwdriver, Impact Wrenches and EC-SERVO-Screwdriver

sockets hex. screws and hex. nuts Page 16 / 17 / 18extensions / ball joints internal-�, external-� Page 18 / 19bits, holder internal hex. screws, threaded pins Page 19 / 20chuck for stud screws stud screws Page 19locking pins and rubber rings – 0

3

Bits, finders (without and with screw suction)

FOR MICROMAT-SCREWDRIVER

Bits, slotted finders, bit holder (non-magnetic)

Bits, finders, bit holder (magnetic)

External hex. driveA3 DIN 3126 (.118”)

order no.

3.84.24.34.54.75.55.6

.20

.22

.22

.22

.24

.28

.28

mm in. order no.

80 39 4580 39 4980 39 4980 39 4980 39 4680 39 4880 39 48

.020 x .122

.024 x .134

.024 x .134

.024 x .134

.024 x .134

.032 x .154

.032 x .154

in.

80 36 0680 39 3580 39 3580 39 3580 39 3580 36 0780 36 07

order no.

80 39 29

slotted screws finder bit bit holder (magnetic)

.150

.165

.170

.177

.185

.216

.220

in.

5.05.55.55.56.07.07.0

mm

0.5 x 30.6 x 3.50.6 x 3.50.6 x 3.50.6 x 3.50.8 x 40.8 x 4

mmbladehead dia.

35 (13/8”)12

(15/32”) (3/8”

ø9.5

57 (21/4”)

ø6.5

(1 /4”)

d

28 (13/32”)

3.84.24.34.54.75.55.6

.20

.22

.22

.24

.24

.28

.28

mm in. order no.

80 39 4034 17 8334 17 8480 39 4480 39 4480 39 4380 39 43

.020 x .122

.024 x .134

.020 x .122

.024 x .134

.024 x .134

.032 x .154

.032 x .154

in.

80 36 0680 39 3580 36 0680 39 3580 39 3580 36 0780 36 07

order no.

80 39 30

order no.

slotted screws bitfinder bit holder (non-magnetic)

.150

.165

.170

.177

.185

.216

.220

in.head dia.

5.05.55.56.06.07.07.0

mmd

0.5 x 30.6 x 3.50.5 x 30.6 x 3.50.6 x 3.50.8 x 40.8 x 4

mmblade

28 (13/32”)36.5 (17/16”)

12.5(1/2”) (3 /8

”)ø9

.5

57 (21/4”)

ø6.5

(1 /4”)

3.03.03.84.24.34.54.75.6

4.04.04.85.35.55.65.86.6

mm order no.

325612341697323862341739341740341698341702323864

.016 x .080

.016 x .098

.020 x .122

.024 x .134

.020 x .122

.024 x .134

.024 x .134

.032 x .154

in.

341689341690323854341691323854341691341691341692

order no.

slotted screws finder1) bit

.118

.118

.150

.165

.170

.177

.185

.220

in.head dia.

4.04.04.85.35.55.65.86.6

mm

.16

.16

.19

.21

.22

.22

.23

.26

in.d

0.4 x 2.00.4 x 2.50.5 x 3.00.6 x 3.50.5 x 3.00.6 x 3.50.6 x 3.50.8 x 4.0

mmblade

10 (3/8”)50 (131/32”)

1) hereto spring sleeve cpl., see leaflet of respective screwdriver Accessories (Optional Equipment)



External hex. driveC4 DIN 3126 (5/32”)


Internal hex. driveD4 DIN 3126 (5/32”)


4

Bits, finders (without and with screw suction)

Bits, bit holders (non-magnetic and magnetic)



AFmm

—0.91.522.53

order no.

—803955803956803957803958803959

T 6T 7T 8T 9T 10T 15

order no.

803600803604803601803603803602803608

803930 803929

order no. order no.

Torxallen bitallen screws, threaded pins

Torx-

bit holder (non-magnetic) or bit holder (magnetic)

Torx 57 (21/4”)

ø6.5

(1 /4”)

28 (13/32”) 28 (13/32”)

point sizePHILLIPSorder no.

POZIDRIVorder no. order no. order no.

012

803950803951803952

803924803925803612

PHILLIPS screws bit bit holder (non-magnetic) or bit holder (magnetic)

803930 803929

POZIDRIV screws57 (21/4”)

ø6.5

(1 /4”)

28 (13/32”)

32 39 0632 39 0632 39 0732 39 0732 39 0732 39 0732 39 0732 39 0732 39 0732 39 0732 39 07

80 36 1380 36 1332 39 0832 39 0832 39 0832 39 0832 39 0832 39 0832 39 0832 39 0832 39 08

32 39 0632 39 0632 57 4132 57 4132 39 0732 39 0732 39 0732 39 0732 39 0732 39 0732 39 07

35 35 7135 35 7133 02 0133 02 0132 39 0832 39 0832 39 0832 39 0832 39 0832 39 0832 39 08

.118

.125

.150

.157

.165

.170

.185

.196

.216

.220

.236

in.pointsize

00111111111

PHILLIPSorder no.

POZIDRIVorder no. mm

3.84.24.85.25.25.25.76.66.66.67.0

PHILLIPSorder no.

POZIDRIVorder no.order no.

32 38 6132 97 1932 38 6232 62 3032 45 7132 45 7132 43 4132 62 3132 38 6432 38 6432 46 59

with screw suctionfinder1) bitPHILLIPS screws

POZIDRIV screws

3.03.23.84.04.24.34.75.05.55.66.0

mm

without screw suctionbit

in.

.15

.16

.19

.20

.20

.20

.22

.26

.26

.26

.27

head dia. d

50 (131/32”) 50 (131/32”)10 (3/8”)











5

Bits

Sockets with shaft (without and with screw suction)

Semi-finished bits and finders (not hardened) special bits


Torx screws

Torx size

T 6T 7T 8T 10

order no.

803926803586803587803589

hex. screws

hex. nuts

AFmm

4.0—5.05.5—

mm in.

8—9

10—

order no.

803960—

803961803962

—

order no.

330633330633330634330634330634

mm in.

7788

9.5

order no.

324587330239324588324589330241

without screw suction with screw suction

socket with shaftspring sleevesocket with shaft

mmd1

in.

5.05.56.66.6

.06

.06

.06—

15/1615/1631/3231/16

order no.490013490014490015490069

mm mm order no.3.63.64.04.0

102130100152

490230490229490228490212

mm mm order no.0.20x1.00.25x1.50.25x2.00.40x4.00.50x4.00.70x4.0

505050909090

324098324099324100339923339924339925

pointsize mm

PHILLIPSorder no.

POZIDRIVorder no.

11101

75 90102152152

328176339921327520348426348430

333917339922337990

—348431

finder

AFin.

5/323/16—7/321/4

mm in.

43—4343—

111/16—

111/16111/16

—

d L

5/16—

23/6425/64—

9/329/325/165/163/8

mm in.

4043404445

19/16111/1619/16123/32125/32

d L

in..14.14.16.16

in.4

51/8315/16

6

d Lin.

.008x.040

.010x.060

.010x.080

.016x.154

.020x.154

.028x.154

in.blade L

131/32131/32131/3239/1639/1639/16

215/1639/16

466

in.in.49/6449/6413/1613/16

mm

19,519,520,520,5

mm

24242578

in.

113/64113/6411/4

321/64

mm

30,530,531,584,5

d2

.12

.15

.19

.19

mm

3.03.94.84.8

mm

1.51.51.5—

in.

.20

.22

.26

.26

L l tDin. in.

bit50 (131/32”)

L







Special bits, finders

Bits, finders

6

FOR MINIMAT-, RECYCLING-, SLIP CLUTCH SCREWDRIVERS

FOR MINIMAT-, SLIP CLUTCH SCREWDRIVERS

mm

3.844.24.34.54.755.666.56.9777.58.28.38.599.29.5

101011

mm

5.55.55.566777

7.58.58.58.58.59.59.510.512

10.51212121213

finder1)

order no.

322575322575322575342338342338342337342346322573342340342344342339342339342339342342342341342345322630342345322630322630322630322630342343

in.

.020 x .122

.020 x .122

.020 x .122

.024 x .134

.024 x .134

.024 x .134

.024 x .177

.032 x .154

.032 x .215

.032 x .154

.038 x .215

.032 x .215

.038 x .215

.038 x .215

.046 x .255

.038 x .215

.046 x .255

.038 x .215

.046 x .312

.046 x .312

.046 x .312

.063 x .312

.063 x .312

bitorder no.

804001804001804001803598803598803598803590803592804012803592803593804012803593803593803872803593804007803593804007804007804007803594803594

mm

6—666

6.5—7

7.5—8.5—8.59

9.5—10—1111121213

finder1)

order no.

325246—

325247325247325248325249

—325133325751

—325250

—325250342258342249

—342248

—325255325256325170325170342260

short executionwithout screw suction

long executionwithout screw suction

mm

0.5 x 3—

0.5 x 30.5 x 30.5 x 30.5 x 3

—0.8 x 40.8 x 4

—1 x 5.5

—1 x 5.51 x 5.5

1.2 x 6.5—

1.2 x 6.5—

1,2 x 81.2 x 81.2 x 81.6 x 81.6 x 8

bitorder no.

804021—804021804021804021804021—803595803595—803596—803596803596803873—803873—804027804027804027803597803597

with screw suction (onlyMINIMAT straight screwdr.size 1 and size 2)

slotted screws

in.

.150

.157

.165

.170

.177

.185

.196

.220

.236

.255

.271

.275

.275

.295

.323

.326

.334

.354

.362

.374

.395

.395

.433

in.

.22

.22

.22

.24

.24

.28

.28

.28

.30

.33

.33

.33

.33

.37

.37

.41

.47

.41

.47

.47

.47

.47

.51

mm

0.5 x 30.5 x 30.5 x 3

0.6 x 3.50.6 x 3.50.6 x 3.50.6 x 4.50.8 x 4

0.8 x 5.50.8 x 41 x 5.5

0.8 x 5.51 x 5.51 x 5.5

1.2 x 6.51 x 5.51.2 x 81 x 5,51.2 x 81.2 x 81.2 x 81.6 x 81.6 x 8

in.

.24—.24.24.24.26—.28.30—.33—.33.35.37—.39—.43.43.47.47.51

in.

.020 x .122—

.020 x .122

.020 x .122

.020 x .122

.020 x .122—

.032 x .154

.032 x .154—

.038 x .215—

.038 x .215

.038 x .215

.046 x .255—

.046 x .255—

.046 x .312

.046 x .312

.046 x .312

.063 x .312

.063 x .312

4 (5/32”)50 (115/16”) 25 (1”)

head dia. d blade d blade

70 (23/4”)

External hex. driveE6.3 DIN 3126 (1/4”)


in.

.150

.157

.165

.170

.177

.185

.196

.220

.236

.255

.271

.275

.275

.295

.323

.326

.334

.354

.362

.374

.395

.395

.433

101011

mm

——666

6.5—7

7.5—8.5—8.59

9,5—10—11

11,5121213

finder1)

order no.

——

353891353891353892353894

—353897333680

—332770

—332770346365333681

—351811

—331735351813326388326388326389

in.

——

.028 x .134

.028 x .134

.028 x .134

.028 x .134—

.032 x .154

.032 x .187—

.036 x .215—

.036 x .215

.038 x .250

.038 x .275—

.038 x .275—

.046 x .312

.046 x .312

.046 x .312

.046 x .312

.046 x .312

bitorder no.

——

804013804013804013804013

—804014804018

—804015

—804015804019804016

—804016

—804017804017804017804017804017

slotted screws

mm

3.844.24.34.54.755.666.56.9777.58.28.38.599.29.5

in.

——.24.24.24.26—.28.30—.33—.33.35.37—.39—.43.45.47.47.51

dhead dia.mm

——

0.7 x 3.50.7 x 3.50.7 x 3.50.7 x 3.5

—0.8 x 4

0.8 x 4.7—

0.9 x 5.5—

0.9 x 5.51 x 6.31 x 7

—1 x 7

—1.2 x 81.2 x 81.2 x 81.2 x 81.2 x 8

102 (4”)

blade

57 (21/4”)



7

FOR MINIMAT-, RECYCLING-, SLIP CLUTCH-, PULSE TOOLS-, ELECTRIC SCREWDRIVERS

without screw suction / with screw suction (only MINIMAT straight screwdriver size 1 and size 2)

Bits, finders, bit holders (non-magnetic and magnetic)

mm

66

6.56.577

7.588

8.599910

10.510.510.511

11.511.512.512.513.5

finderorder no.

354698354698354699354699354700354700341388354701334920354702354468354468354703354704354705354706354707354708354709354710354711354711354712

mm

0.5 x 30.5 x 3

0.6 x 3.50.6 x 3.50.6 x 3.50.6 x 3.50.6 x 4.50.8 x 5

0.8 x 5.50.8 x 5.50.8 x 5.50.8 x 5.51.2 x 6.51 x 5.5

1.2 x 6.51 x 5.51.2 x 81 x 5.5

1.2 x 6.51.2 x 81.2 x 81.6 x 81.6 x 8

bitorder no.

820883820883821071/3821071/3821071/3821071/3803841803842803969803969803969803969821072/3821075821072/3821075803846821075821072/3803846803846821076821076

bit holder (non-magnetic)order no.

bit holder (magnetic)order no.

804602 821068

in.

.020 x .122

.020 x .122

.024 x .134

.024 x .134

.024 x .134

.024 x .134

.024 x .177

.032 x .196

.032 x .215

.032 x .215

.032 x .215

.032 x .215

.046 x .255

.038 x .215

.046 x .255

.038 x .215

.046 x .312

.038 x .215

.046 x .255

.046 x .312

.046 x .312

.063 x .312

.063 x .312

in.

.24

.24

.26

.26

.28

.28

.30

.31

.31

.33

.35

.35

.35

.39

.41

.41

.41

.43

.45

.45

.49

.49

.53

d blade

75 (3”)

ø10,

5(13

/32”)57 (21/4”)

ø11

(7 /16”

)25 (1”)



External hex. driveC6.3 DIN 3126 (1/4”) Internal hex. drive

D6.3 DIN 3126 (1/4”)Internal hex. driveD6.3 DIN 3126 (1/4”)

mm

———————7

7.5—8.5—8.59

9.5—10—11

11.5121213

finder1)

order no.

———————

353904330731

—353905

—353905330178353906

—326669

—353907353909325518325518353910

mm

———————

0.8 x 40.8 x 4.7

—0.9 x 5.5

—0.9 x 5.51 x 6.31 x 7

—1 x 7

—1.2 x 81.2 x 81.2 x 81.2 x 81.2 x 8

bitorder no.

———————

804034804039

—804035

—804035804033804036

–804036

—804037/1804037/1804037/1804037/1804037/1

finder1)

order no.

———————

343915328972

—353911

—353911353912353913

—332775

—353914353915337006337006353916

mm

———————

0.8 x 40.8 x 4.7

—0.9 x 5.5

—0.9 x 5.51 x 6.31 x 7

—1 x 7

—1.2 x 81.2 x 81.2 x 81.2 x 81.2 x 8

bitorder no.

———————

803979803980

—803981

—803981803982803983

—803983

—803984803984803984803984803984

mm

———————7

7.5—8.5—8.59

9.5—10—11

11.5121213

in.

———————

.032 x .154

.032 x .187—

.036 x .215—

.036 x .215

.038 x .250

.038 x .275—

.038 x .275—

.046 x .312

.046 x .312

.046 x .312

.046 x .312

.046 x .312

in.

———————.28.30—.33—.33.35.37—.39—.43.45.47.47.51

in.

———————.28.30—.33—.33.35.37—.39—.43.45.47.47.51

in.

———————

.032 x .154

.032 x .187—

.036 x .215—

.036 x .215

.038 x .250

.038 x .275—

.038 x .275—

.046 x .312

.046 x .312

.046 x .312

.046 x .312

.046 x .312

82 (31/4”) 127 (5”) 107 (47/32”) 152 (6”)

d blade d blade




8


long excecutionwithout screw suction

Bitsshort executionwithout screw suction

FOR MINIMAT-, RECYCLING-, SLIP CLUTCH-, ELECTRIC SCREWDRIVERS

3.83.844.34.755.666.56.977.58.28.399.29.5

PHILLIPSorder no.

804040804041804041804041804041804041804041804041804042804042804042804042804042804042804042804042804042804042804043804043804043804044804044

01111111222222222233344

POZIDRIVorder no.

—803985803985803985803985803985803985803985803986803986803986803986803986803986803986803986803986803986803987803987803987803991803991

PHILLIPSorder no.

804045804046804046804046804046804046804046804046804047804047804047804047804047804047804047804047804047804047804048804048804048 — —

POZIDRIVorder no.

—803988803988803988803988803988803988803988803989803989803989803989803989803989803989803989803989803989803990803990803990 — —

PHILLIPS screws

POZIDRIV screws

mmpoint size in.

10111212.514.516

.150

.150

.157

.170

.185

.196

.220

.236

.255

.271

.275

.295

.323

.326

.354

.362

.374

.395

.433

.472

.492

.573

.630

head dia.

70 (23/4”)50 (115/16”)



mm

3.844.34.755.666.56.977.58.28.399.29.5

PHILLIPSorder no.

324963324963324963324963324963324963324963324331324331324331324331324331324331324331324331324331324331

point size

11111112222222222

POZIDRIVorder no.

324686324686324686324686324686324686324686324842324842324842324842324842324842324842324842324842324842

finder1)

order no.

353917353931353933353934353935334181333680

—338337

—346365344104

——

331735351813326388

withoutscrew suction

mm

77777

7.57.5—8.5—910——11

11.512

POZIDRIVorder no.

353922353922353922353922353922324686324686

—324842

—324842324842

——

324842324842324842

PHILLIPSorder no.

353921353921353921353921353921324963324963

—324331

—324331324331

——

324331324331324331

with screw suction (onlyMINIMAT straight screwdriver size 1 and size 2)

10

in.

.150

.157

.170

.185

.196

.220

.236

.255

.271

.275

.295

.323

.326

.354

.362

.374

.395

head dia.in.

.28

.28

.28

.28

.28

.30

.30—.33—.35.39——.43.45.47

103 (4”) 103 (4”)57 (21/4”)

PHILLIPS screws

POZIDRIV screws

d




9

FOR MINIMAT-SCREWDRIVERSFOR MINIMAT-, RECYCLING-, SLIP CLUTCH-,PULSE TOOLS-, ELECTRIC SCREWDRIVERS

long execution, with screw suction (onlyMINIMAT straight screwdriver size 1 and size 2)

Bits, finders Bits, bit holders (non-magnetic and magnetic)

mm

6656

6.56.57

7.5—8.5—9

9.5——11111213————

finder1)

order no.

325246325246330742325247325249329280325220325181—325251—325260325253——325255325256325170342260————

PHILLIPSorder no.

804045338894338894338894338894804046804046804046

—804047

—804047804047

——

804047804047804047804048

————

POZIDRIVorder no.

—339140339140339140339140803988803988803988

—803989

—803989803989

——

803989803989803989803990

————

PHILLIPSorder no.

POZIDRIVorder no.

804635804636804636804636804636804636804636804636804637804637804637804637804637804637804637804637804637804637804638804638804638804640804640

804641/3804665804665804665804665804665804665804665804666804666804666804666804666804666804666804666804666804666804667804667804667804674804674

in.

.24

.24

.20

.24

.26

.26

.28

.30—.33—.35.37——.43.43.47.51————

25 (1”)

ø14

(9/16

”)

L

ø11

(7/16

”)

L25 (1”) 70 (23/4”)

dnon-

magneticorder no.

magneticorder no.

821068337722330744335481334086330745

magnetic andquick change

chuckorder no.

75100150204250300

in.

804602804639/1804614/1812944/1

57102152203

821692820150358131

21/32

3531/32

mm

51.576.5

151.5

L

3315/16

529/32

81/32

927/32

1113/16

21/4

468

in.mmL

in.mmL



External hex. driveE6.3 DIN 3126(1/4”)


D6.3 DIN 3126 (1/4”)Internal hex. driveD6.3 DIN 3126(1/4”)

POZIDRIVorder no.

330255330255330255330255330255330255330255331003331003331003331003331003331003331003331003331003331003

PHILLIPSorder no.

325567325567325567325567325567325567325567331002331002331002331002331002331002331002331002331002331002

finder1)

order no.

353945353946353947353948353949337383330731

—333555

—330178353950

——

353952353953339264

mm

77777

7.57.5—9.5—9

9.5——11

11.511.5

in.

.28

.28

.28

.28

.28

.30

.30—.37—.35.37——.43.45.45

POZIDRIVorder no.

PHILLIPSorder no.

353944353944353944353944353944325567325567

—331002

—331002331002

——

331002331002331002

339867339867339867339867339867330255330255

—331003

—331003331003

——

331003331003331003

POZIDRIVorder no.

327386327386327386327386327386327386327386330026330026330026330026330026330026330026330026330026330026

PHILLIPSorder no.

327986327986327986327986327986327986327986328551328551328551328551328551328551328551328551328551328551

finder1)

order no.

353955353958353959353960353961337182328972

—332621

—353912353962

——

353963353964326088

mm

77777

7.57.5—9—9

9.5——11

11.512

in.

.28

.28

.28

.28

.28

.30

.30—.35—.35.37——.43.45.47

POZIDRIVorder no.

PHILLIPSorder no.

346327346327346327346327346327327986327986

—328551

—328551328551

——

328551328551328551


with screw suction (onlyMINIMAT straight screwdr. size 1 and size 2)


with screw suction (onlyMINIMAT straight screwdriver size 1 and size 2)

127 (5”) 82 (31/4”) 127 (5”) 152 (6”) 107 (41/4”) 152 (6”)

dd






340727340727340727340727340727327386327386

—330026

—330026330026

——

330026330026330026

10

Semi-finished finders(not hardened)(not forElectricScrewdrivers)

FOR MINIMAT-, RECYCLING-, SLIP CLUTCH-, ELECTRIC SCREWDRIVERS

Threaded bit tips Bit holder (threaded)

pointsize

1111222

mm

5.566.3555.55.566.356

g

8-3210-32M 4M 48-3210-32M 5

mm

22342525223434

PHILLIPSorder no.

803744/1803747/1803728/1––803745/1803746/1803855

POZIDRIVorder no.

803707/1803748/1––803750/3803729/1803749/1803856

mm

5.65.65.65.65.65.66.356.356.356.356.356.355.55.55.55.55.55.5777777777788888

8-328-328-328-328-328-32

10-3210-3210-3210-3210-3210-32M 4M 4M 4M 4M 4M 4M 5M 5M 5M 5M 5M 5M 5M 5M 5M 5M 6M 6M 6M 6M 6

in.

35/32

41/8

51/8

65/32

65/8

7211/16

321/32

421/32

543/64

65/32

617/32

31/32

41/64

561/32

61/2

657/64

211/16

31/32

35/8

41/64

439/64

555/8

63/32

61/2

611/16

31/32

41/64

563/32

79/32

order no.

337500337499334316353697334420353694337497336707334315341042334421355758337520337521335637354233341765347107348745344689349569344819345466343309357736346886348235348417362258370770371868351713351533

mm

234464

101126

in.

29/32

123/32

11/2

321/32

321/32

order no

490199490031490105490107490108

in.

7/321/4

13/647/327/321/4

15/64

mm in.

7/8

111/32

11

7/8

111/32

111/32

in.

7/327/327/327/327/327/321/41/41/41/41/41/47/327/327/327/327/327/329/329/329/329/329/329/329/329/329/329/325/165/165/165/165/16

dmm

801051301561681786893

11814415616677

102127153165175687792

10211712714315516517077

102127155185

ld l

15375794

119

19/32

115/32

21/4

311/16

411/16

mm in. mm in.

507089

102/127152

115/16

23/4

31/2

4 / 56

L l bit length

ø13

(.511

”)

*) special lengths upon request

T 8T 10T 10T 10T 15T 15T 15T 20T 20T 20T 20T 25T 25T 25T 25T 30T 30T 30T 40

5.565.5665.5665.56765.5676777

M 410-32M 4M 510-32M 4M 510-32M 4M 5M 510-32M 4M 5M 610-32M 5M 6M 5

25342534342534342534253425342534252525

torxorder no.

820235/3822235/3803753823894/3812945/3803754820603/3820297/3803756/3812894/3821042/3820298/3825008/3822106/3821760/3820299/3803706/3821061/3821932/3

l

d g

torxsize mm

gin. mm in.

d l

7/3215/647/3215/6415/647/3215/6415/647/3215/649/3215/647/3215/649/3215/649/329/329/32

1111/32

1111/32

111/32

1111/32

111/32

1111/32

1111/32

1111/32

1111/32

111


Threaded bit tips

11

Special bits(not hardened)

Adapters Chuck for stud screws

77777778

in.

.275

.275

.275

.275

.275

.275

.275

.315

order no.

490221490222490223490224490225490279490281490319

mmsquaredrive mm

5076

1001522032543053554065076

10015225450

152

order no.

804050803647/1804051803808/1803809/1803810/1803811/1803798/1820766/1804052/1820145/1803807820392/1803805/1804053820035/1

in.

50505050555555

order no.

390287390285390335390288390295390339390338

mm

9999

161616

M 3M 4M 5M 6M 8M 10M 12

stud screws

1/4"1/4"

3/8"

1/2"1/2"

70102127152200260300300

mm in.

23/4456

77/8101/4

1113/161113/16

1/4"1/4"1/4"1/4"1/4"1/4"1/4"

3/8"3/8"3/8"3/8"

in.

23

315/16681012141623

315/1661026

Ld Lin.mm

D L

11/3211/3211/3211/325/85/85/8

2222

23/1623/1623/16

Externalsquare drive


Externalhex. drive External hex. drive

E6.3 DIN 3126 (1/4”)

12


Bits

L = 152 (6”)order no.

AFmm

Torx-

1.52—2.5—3——4—5—6—8

T 6T 7T 8T 9T 10T 15T 20T 25T 27T 30T 40————

L = 50 (115/16”)order no.

—324814/3803670/1804114803671804115803672803673804116803675804117803676804118803677803678

—327153333277325565—803975——803976—803977—803978—812928/3

allen bit Torx bit

AFin.

—5/643/32

—7/64

—1/89/645/323/16

—7/32

—1/45/16

Torx screwsallen screws,threaded pins

L = 70 (23/4”)order no.

L = 50 (115/16”)order no.

821092803535/1803536803537/1803869/1803538/1803539/1803540/1803541/1803542/1803543/1————

821516803548/1803866/3803549/1803550812914812915812916812917812918803556————

L = 70 (23/4”)order no.

821055/1803560/1803561803562/1803563/1803564/1803565/1803566/1822995/1803568/1803569/1————

L = 89 (31/2”)order no.

823038823520/1803575803576/1803868803577/1803578/1803579/1803580/1803581/1803582/1————



13


allen bitorder no.

Torx bitorder no.

820302804668803682804669—804670803684—804671803687804672803688804673803689803690

803520803521803522803523803524803525803526803527803528803529803530————

non-magneticorder no.

804602804639/1804614/1812944/1

magneticorder no.

821068337722330744335481334086330745

magnetic andquick change chuck

order no.

821692820150358131

mm

75100150204250300

3315/1657/881/1697/8

1113/16

Lin.

Internal hex. driveD6.3 DIN 3126 (1/4”)

L

ø11

(7 /16”

)25 (1”)25 (1”)

ø10,

5 (13

/32”) L

ø14

(9 /16”

)

mm

57102152203

21/4468

Lin. mm

51.576.5

151.5

21/323

531/32

Lin.




External hex. driveC6.3 DIN 3126 (1/4”)

External hex. driveC6.3 DIN 3126 (1/4”)



Sensor sleeves, bits

14

FOR SENSOMAT-, MINIMAT-T-SCREWDRIVERS

counter nut for above with finders (and spring sleeve),without and with screw suction*)

mmsensor sleeves

order no.

1717171717171717171717202020121212

346070346071346072346088346089346090346091346092346093346094346095346096346084346097346098346099346100

PHILLIPSorder no.

338894338894338894804046804046804046804046804047804047804047804047804047804047804047804047804047804047

POZIDRIVorder no.

339140339140339140803988803988803988803988803989803989803989803989803989803989803989803989803989803989

bit

slotted screws(only self tapping screws)

mm

6666.577.588.5999

101010111111,5

3.844.34.755.666.56.977.588.28.399.29.5

*) Screw suction for drilling and self tapping screws not recommendable

PHILLIPS screws(only drilling and self tapping screws)

POZIDRIV screws(only drilling and self tapping screws)

order no.

counter nut339983 (f. SENSOMAT)339983/1 (f. MINIMAT-T)

spring sleeve 401613 A(screwdriver size 1)

spring sleeve 401613 B(screwdriver size 2)

(only for screw suction)

mm

3.844.34.54.755.666.56.9777.588.28.38.59

in.

.150

.157

.170

.177

.185

.196

.220

.236

.255

.271

.275

.275

.295

.315

.323

.326

.334

.354

head dia.

11111112222222222

.150

.157

.170

.185

.196

.220

.236

.255

.271

.275

.295

.315

.323

.326

.354

.362

.374

pointsize mm in. in.

d

.24

.24

.24

.26

.28

.30

.31

.33

.35

.35

.35

.39

.39

.39

.43

.43

.45

in.l

11/1611/1611/1611/1611/1611/1611/1611/1611/1611/1611/1613/1613/1613/1615/3215/3215/32

head dia.

70 (23/4”)

finder339982 (f. SENSOMAT)368013 (f. MINIMAT-T)


Sensor sleeves, bits

Sensor sleeves, bits, bit holder (magnetic)

15

counter nut for above with finders, without screw suction

counter nut for above with finders, without screw suction

mm mmsensor sleeves

order no. mmbit

order no.counter nutorder no.

finderorder no.

171717171717171717171717172020202012

346070346071346072346073346074346075346076346077346078346079346080346081346082346083346084346085346086346087

0.5 x 30.5 x 30.5 x 30.5 x 30.5 x 30.5 x 30.8 x 40.8 x 40.8 x 41.0 x 5.50.8 x 4.01.0 x 5.51.0 x 5.51.0 x 5.51.2 x 6.51.0 x 5.51.2 x 6.51.0 x 5.5

804021804021804021804021804021804021803595803595803595803596803595803596803596803596803873803596803873803596

339983(f. SENSOMAT)

339983/1(f. MINIMAT-T)

mm mmsensor sleeves

order no.

7777788

101010

77777888888888888

344123344123344123344123344123344124344124343983343983343983344125344125344125344125344126344126344126

counter nutorder no.

finderorder no.

11.511.511.511.512.512.512.5

PHILLIPSorder no.

804636804636804636804636804636804636804636804637804637804637804637804637804637804637804637804637804637

POZIDRIVorder no.

804665804665804665804665804665804665804665804666804666804666804666804666804666804666804666804666804666

bit holder (magnetic)order no.

821068

bit

in.

.28

.28

.28

.28

.28

.31

.31

.39

.39

.39

.45

.45

.45

.45

.49

.49

.49

.28

.28

.28

.28

.28

.31

.31

.31

.31

.31

.31

.31

.31

.31

.31

.31

.31

in.

6666.56.577.588.59999

1010101011

in.

.020 x .122

.020 x .122

.020 x .122

.020 x .122

.020 x .122

.020 x .122

.032 x .154

.032 x .154

.032 x .154

.038 x .215

.032 x .154

.038 x .215

.038 x .215

.038 x .215

.046 x .255

.038 x .215

.046 x .255

.038 x .215

blade

11/1611/1611/1611/1611/1611/1611/1611/1611/1611/1611/16

13/1613/1613/16

15/32

13/16

11/1611/16

.24

.24

.24

.26

.26

.28

.30

.31

.33

.35

.35

.35

.35

.39

.39

.39

.39

.43

in. in.

75 (3”)

70 (23/4”)

d l

d l

ø10,

5 (13

/32”)

25 (1”)

339982(f. SENSOMAT)

368013(f. MINIMAT-T)

343982(f. SENSOMAT)


343981(f. SENSOMAT)


External hex. drive



D6.3 DIN 3126 (1/4”)

16

In-between sizes with hexagon and sockets with square on request

Sockets with hexagonhex. screwshex. nuts

Socketopening

Øorder no.

———

804171804173804174804175804176804177804178821993804179

——————

804183

O

———5.58.59.59.5

1111111212——————12

FOR RATCHET WRENCH

FOR MINIMAT-, RECYCLING-, SLIP CLUTCH-, PULSE TOOLS, ELECTRIC SCREWDRIVER

AFin.

––7/32––

5/16––––––––––––5/8––––3/4––––

11/16––––

order no.

——

804136804137804138

——————————————

order no.

——

804185804186804187804188

—————————————

order no.

————

804139804140804141804142804143804144821541804145821542804146

———

804147804148

order no.

———————

804154804155

——

804157—

804158804159402717804161804165

—

39-331-19 K 39-331-21 K 39-331-32 K39-331-32 L

39-331-46 KClosed Head

39-331-43 OOpen Head

order no.

401467/8401467/7401467/5401467/4401467/2

——————————————

39-521-19 K

AFmm

55.57810111213141516171819222427

1/2"5/8"

––––––

7/32––––––––––––––––––––––––––––––

55.5678910111213

AFmm

AFin.

10101012131416

15.516.519

25/6425/6425/6415/321/29/165/8

39/6421/323/4

mm

hex. screwshex. nuts

Din.

804126804120804125804121804122804113804123804127803791804124


804135804130804128804131804132804152804133804129804111804134

magneticorder no.

with screw suction(only MINIMAT straight screwdr. size 1 and size 2)

50 (2")50 (2")



—7/32

——

5/16

—————

Dmm in.

8.59.59.510

11.51313———

11/323/83/8

25/6429/321/21/2

———

325363325153325421324914325052335024325053

———

order no.

Sockets with shaft 1/4” hex. drive


Sockets, Holder

AFin––––5/8––––3/4––––––

11/16

mm25253030303030

32.535

38.5

in.19/1619/1611/219/1611/219/1611/219/16149/64131/32

order no.804392804393820293804394820294804395

————

order no.—

804393820293804394820294804395820526804396804397804398

Holder (for socket AF 14)order no.

804245

Socket

External square driveE 12.5 DIN 3121 (1/2”)

External hex. driveAF 14

30

Internal square driveG 12.5 DIN 3121 (1/2”)

AFmm10131617181921222427

in11

13/1613/1613/1613/1613/1619/3213/8

133/64

mm40403840384038404550

D L

39-331-46 KClosed Head

39-331-32 K39-331-32 L

mm in.

55.5678910101112131617181921222427

AFin.

Dnon-

magneticorder no.

L

25232323232323

25.4232323————————

804056804057804058804059804060804061804062

––804063804064804065

————————

magneticorder no.

804086804087804088804089804090804091

––804092/1804093

804094/1804095

————————

D

———19191919—191922

24.525.526.528————


L

———

804370804371820853804372

—820855820295804373820292804374820311804375

————

magneticorder no.

———

820851820852820854803768

—820856820857820858820859812942820860820711

————

D

————252525—252525253030303233

35.540


L

————404040—4040404040404040404550

————

804391820862804392

—803766820175804393820293804394820294804395820526804396804397804398

magneticorder no.

————

820861820863820864

—820865820866820244820867812923820541812925820868820869820870820871

Internal square drive G12.5 DIN 3121 (1/2”)

AFmm

—7/32

——

5/16

——––———5/8

——3/4

———

11/16

mm in. mm in. mm in. mm in. mm in. mm in.

1/21/21/21/21/2

17/3219/325/85/8

11/163/4

————————

129/3229/3229/3229/3229/3229/32

129/3229/3229/3229/32

—————––––

———3/43/43/43/4

—3/43/47/8

31/32

113/64

13/32

————

———

111/32

111/32

111/32

111/32

—111/32

111/32

111/32

111/32

111/32

111/32

111/32

————

————111—1111

13/16

13/16

13/16

11/4

15/16

113/32

19/16

————

19/16

19/16

19/16

—19/16

19/16

19/16

19/16

19/16

19/16

19/16

19/16

19/16

125/32

131/32

———34343434—34343434343434————

Internal square drive G10 DIN 3121 (3/8”)Internal square drive G6.3 DIN 3121 (1/4”)

1313131313

13.515

15.916

17.519————————


in.

—5/8——3/4———

11/16—

11/4———

113/16131/32

——

29/16—

261/64—

311/32335/64

—315/16

—421/64417/32

—51/8——

3535353535353537

40.5————————————————————————

484848484848485050————————————————————————

803885820527803886820528803887820529803888803889803890

————————————————————————

short execution, non-magnetic

Internal square driveG 16 DIN 3121 (5/8")


Please order locking pin and rubber ring extra

——44444444444444464951546066——————————————————

——50505050505050545355585858——————————————————

Internal square driveH 20 DIN 3121 (3/4")

————————545454545763

69.574.581

87.5———————————————

————————60636262626670708585———————————————

————————

804430804431804432820533804433804434804435804436804437804438

———————————————

Internal square driveH 25 DIN 3121 (1")

——————————————8686879399106112118125131137143150156160————

——————————————8484909095100105110110115120125130135128————

——————————————

804450804451804452804453804454804455804456804457804458804459804460804461804462804463825633

————


—————————————————————————

150156162169175188207218

mm

—————————————————————————

140147147150152160170177

—————————————————————————

804480804481804482804483804484804485804486804487


orderno.

——

804410820530804411820531804412804413804414804415804416820532804417804418804419

——————————————————

orderno.

orderno.

orderno.

orderno.mm

13161718192122242730323436414650556065707580859095100105110115120130145155

AFin.mm

D

13/813/813/813/813/813/813/8

129/64119/32

————————————————————————

in.mmL

157/64157/64157/64157/64157/64157/64157/64131/32131/32

————————————————————————

in.mmD

——

147/64147/64147/64147/64147/64147/64147/64113/16115/1621/6421/8

223/64239/64

——————————————————

in.mmL

——

131/32131/32131/32131/32131/32131/32131/3221/823/32211/6429/3229/3229/32

——————————————————

in.mmD

————————

21/821/821/821/821/4

231/64247/64215/1633/1637/16

———————————————

in.mmL

————————

223/64231/6427/1627/1627/16219/3223/423/4

311/32311/32

———————————————

in.mmD

——————————————

325/64325/64327/64321/32357/64411/64413/32441/64459/6455/32525/6455/8

529/3269/64619/64

————

in.mmL

——————————————

35/1635/16335/64335/64347/64315/1649/64421/64421/64417/32423/32459/6451/855/1653/64

————

in.mmD

—————————————————————————

529/3269/6463/8

621/32657/64713/3285/32837/64

—————————————————————————

533/64525/32525/32529/32563/64619/64611/16631/32

Lin.

Sockets with female square drive

17

short execution, non-magnetic and magnetic

FOR MINIMAT-, RECYCLING, SLIP CLUTCH-, PULSE TOOLS, ELECTRIC SCREWDRIVER,IMPACT WRENCHES, EC-SERVO-SCREWDRIVER

18

D

L

Sockets with internal square drive DIN 3121

FOR MINIMAT-, RECYCLING, SLIP CLUTCH-, PULSE TOOLS, ELECTRIC SCREWDRIVER,IMPACT WRENCHES, EC-SERVO-SCREWDRIVER

Extensions with internal square drive DIN 3121

AFmm

AFin.

Dorder no.

long execution, non-magnetic

789101112131617181921222427

1313

14.51616

17.519————————

45454545454545————————

803767/1803759/1820446/1803760/1820785/1820101/1812931/1

————————

—191919191922

24.525.526.528————

—820872820873820874820875820876820877820878820879820880820881

————

—25—25——253030303030

32.535

38.5

—85—85——858085808080858585

—804400

—804401

——

804402820534804403820535804404820536804405804406804407

—5/16

—

—

—

—

—5/8

—

—3/4

—

—

—

11/16

1/21/29/165/85/8

11/163/4

————————

13/4

13/4

13/4

13/4

13/4

13/4

13/4————————

—3/43/43/43/43/47/8

31/32

113/64

13/32

————

—2222222222————

—1—1——1

13/16

13/16

13/16

13/16

13/16

19/32

13/8

133/64

—51515151515151515151————

Lmm in.mm in.

Dorder no.

Lmm in.mm in.

Dorder no.

Lmm in.mm in.

—311/32

—311/32

——

311/32

35/32

311/32

35/32

35/32

35/32

311/32

311/32

311/32

Internal square drive G12.5 DIN 3121 (1/2”)Internal square drive G10 DIN 3121 (3/8”)Internal square drive G6.3 DIN 3121 (1/4”)

orderno

803891—

803892—

803893803894803895

———————————————————

long execution, non-magnetic

Internal square driveG 16 DIN 3121 (5/8")


44—4444444444464951546067—————————————

100—

100100100100100100100100100100100—————————————

804420—

804421820537804422804423804424804425804426820538804427804428804429

—————————————


—————54545454545763

69.574.581

87.5——————————

—————

110110110110108108108110115115115——————————

—————

820067804440804441804442820539804443804444804445804446804447804448

——————————

Internal square driveH 25 DIN 3121 (1")

————————————8686879399106112118125131137143150156

————————————

130140140140150150160170170180180190200200

————————————

804465804466804467804468804469804470804471804472804473804474804475804476804477804478



AFmm

1718192122242730323436414650556065707580859095100105110

——3/4

———

11/16

—11/4

———

113/16

131/32

——

29/16

—261/64

—311/32

335/64

—315/16

—421/64

mm

35—35—3537

40.5———————————————————

mm

90—90—909090———————————————————

in. in.D L

mm mmin. in.D L order

no mm mmin. in.L order

noD

mm mmin. in.L order

noDAF

in.

13/8

—13/8

—13/8

129/64

119/32

———————————————————

335/64

—335/64

—335/64

335/64

335/64

———————————————————

315/16

—315/16

315/16

315/16

315/16

315/16

315/16

315/16

315/16

315/16

315/16

315/16

—————————————

—————

421/64

421/64

421/64

421/64

41/4

41/4

41/4

421/64

417/32

417/32

417/32

——————————

—————21/8

21/8

21/8

21/8

21/8

21/4

231/64

247/64

215/16

33/16

37/16

——————————

————————————

325/64

325/64

327/64

321/32

357/64

411/64

413/32

441/64

459/64

55/32

525/64

55/8

529/32

69/64

————————————51/8

533/64

533/64

533/64

529/32

529/32

619/64

611/16

611/16

73/32

73/32

731/64

77/8

77/8

147/64

—147/64

147/64

147/64

147/64

147/64

113/16

115/16

21/64

21/8

223/64

241/64

—————————————


mm191919—

mm75150300—

orderno.

804490804491804492

—

internal-�external-�

G 10 DIN 3121 (3/8”)E 10 DIN 3121 (3/8”)

G 12.5 DIN 3121 (1/2”)E 12.5 DIN 3121 (1/2”)

H 20 DIN 3121 (3/4”)F 20 DIN 3121 (3/4”)

H 25 DIN 3121 (1”)F 25 DIN 3121 (1”)

H 40 DIN 3121 (11/2”)F 40 DIN 3121 (11/2”)


in. in.3/43/43/4—

261/64529/321113/16

—

D Lmm252525—

mm75125250—

orderno.

804493804494804495

—

in. in.63/6463/6463/64—

261/64459/64927/32—

D Lmm—444444

mm—175250330

orderno.—

804497804498804499

in. in.—

147/64147/64147/64

—657/64927/32

13

D Lmm54545454

mm100175250330

orderno.

804500804501804502804503

in. in.21/821/821/821/8

315/16657/64927/32

13

D Lmm8686——

mm250380——

orderno.

804505804506

——

in. in.325/64325/64

——

927/321431/32

——

D L

19

D

L

d

max 35°

d

L

D

Chuck for stud screws with internal square drive DIN 3121

FOR IMPACT WRENCHES, PULSE TOOLS, EC-SERVO SCREWDRIVER

Ball joint with internal square drive DIN 3121


Dmmin.

165/8

dmmin.

165/8

L = 43 mmorder no.

804518 2255/64

2255/64

L = 58 mmorder no.

804510 2817/64

2817/64

L = 78 mmorder no.

804511 3811/2

3811/2

L = 95 mmorder no.

804512 5323/32

5323/32

L = 128 mmorder no.

804513

internal-�external-�

G 6.3 DIN 3121 (1/4”)E 6.3 DIN 3121 (1/4”)

G 12.5 DIN 3121 (1/2”)E 12.5 DIN 3121 (1/2”)

H 20 DIN 3121 (3/4”)F 20 DIN 3121 (3/4”)

H 25 DIN 3121 (1”)F 25 DIN 3121 (1”)

86325/64

86325/64

L = 178 mmorder no.

804514

H 40 DIN 3121 (11/2”)F 40 DIN 3121 (11/2”)

G 10 DIN 3121 (3/8”)E 10 DIN 3121 (3/8”)D

mmin.

dmmin.

Dmmin.

dmmin.

Dmmin.

dmmin.

Dmmin.

dmmin.

Dmmin.

dmmin.

orderno.mm mm mm

M 4M 5M 6M 8M 10M 12M 14M 16M 18M 20M 22M 24M 27M 30M 33

stud screws

Internal square driveG 10 DIN 3121 (3/8”)

Internal square driveG 12.5 DIN 3121 (1/2”)

Internal square driveH 20 DIN 3121 (3/4”)

Internal square driveH 25 DIN 3121 (1”)

3535353535——————————

2222222222——————————

6565656565——————————

790025 A790025 B790025 C790025 D790025 E

——————————


13/813/813/813/813/8——————————

55/6455/6455/6455/6455/64——————————

29/1629/1629/1629/1629/16——————————

D d Lin. in. in.

orderno.mm mm mm

———4747474747———————

———2828282828———————

———7984848484———————

———

390203 A390203 B390203 C390203 D390203 E

———————

———

127/32127/32127/32127/32127/32———————

———

17/6417/6417/6417/6417/64———————

———

37/6435/1635/1635/1635/16———————

D d Lin. in. in.

orderno.mm mm mm

——————606060606060———

——————414141414141———

——————959595959595———

——————

390135/1 A390135/1 B390135/1 C390135/1 D390135/1 E390135/1 F

———

——————

223/64223/64223/64223/64223/64223/64———

——————

139/64139/64139/64139/64139/64139/64———

——————

347/64347/64347/64347/64347/64347/64———

D d Lin. in. in.

orderno.mm mm mm

—————————666666666666

—————————545454545454

—————————131131131131131131

—————————

390168 A390168 B390168 C390168 D390168 E390168 F

—————————

219/32219/32219/32219/32219/32219/32

—————————21/821/821/821/821/821/8

—————————

55/3255/3255/3255/3255/3255/32

D d Lin. in. in.

Threadsize

AFin.

L = 35 mm= 13/8 in.order no.

1/8

—————5/16

————————3/43/4

——

11/16

——

804525804526804527804528804528820046804529804530804530804531804531804532804532820215820215

———————

order no.

804520804521804522804519

804523/1804524

Bits

external hex. drive

internalhex. screws

L = 40 mm= 137/64 in.order no.

—————––—

804533804533804534804534804535804535804536804536

———————

L = 50 mm= 131/32 in.order no. mm

—————––—————————

804537804537804541804542804619804574804618

internalsquare drive

DIN 3121

G 10 (3/8”)G 12.5 (1/2”)H 20 (3/4”)H 20 (3/4”)H 25 (1”)H 25 (1”)

internalhex. drive

7/16” (11.1 mm)7/16” (11.1 mm)5/8” (15.9 mm)7/8” (22 mm)

5/8” (15.9 mm)7/8” (22 mm)

223044445454

323852606870

5/8” 7/8”7/16”


L

external hex. drive

Holder

D

L

internal square driveinternal hex. drive

threaded pinswith internal hex.

AFmm3456678101012121414171719192224273236

D Lin. in.

55/6413/16147/64147/6421/821/8

55/6413/16147/64147/6421/821/8

11/411/223/64223/64243/6423/4

mm

Tech

nica

l alte

ratio

ns re

serv

ed -

Fri

for sockets, holder, extensions, ball joints and chucks for stud screws

for bitwith external hex. drive C 6.3 DIN 3126 (1/4”)

Lmm / in.


65 / 29/16 825021

External square drive Lmm / in.

order no.

E 10 DIN 3121 (3/8”)E 12.5 DIN 3121 (1/2”)F 20 DIN 3121 (3/4”)

50 / 131/3254 / 21/876 / 3

804365/1804366/1804363/1

for sockets

L


External hex. driveE11.2 DIN 3126(7/16”)

Internal hex. driveD6.3 DIN 3126(1/4”)

L

Dmm / in

11.1 / 7/16

FOR IMPACT WRENCHES, PULSE TOOLS, EC-SERVO SCREWDRIVER

Holder

Locking pins and rubber rings

FOR IMPACT WRENCHES WITH QUICK CHANGE CHUCK (INTERNAL HEX. DRIVE DIN 3126 F11.2)

Bits

D

G 10 (3/8”)G 12.5 (1/2”)G 12 .5 (1/2”)G 16 (5/8”)H 20 (3/4”)H 25 (1”)H 40 (11/2”)H 40 (11/2”)H 63 (21/2”)

Internalsquare driveDIN 3121

Sockets ExtensionBall jointHolder

Chuck forstud screws

AFmm mm

Rubber ring

7-198-1316-278-2717-4627-6046-9095-110100-155

19/2225

28/3035

38/445486——

22—28—4154———

Locking pin

l

d Dd

order no.

802513803370802499802524802546802547802548802468802468

mm in.

14182024344272114114

1/81/85/325/327/3219/6417/6427/6427/64

9/32-3/45/16-33/645/8-11/165/16-11/16

43/64-113/1611/16-223/64113/16-335/64347/64-421/64315/16-67/64

3/4 / 55/64 63/64

17/64 / 13/1613/8

11/2 / 147/6421/8

325/64——

55/64—

17/64—

139/6421/8———

D dmm

3344

5.57.56.510.510.5

35/6445/6425/3215/16111/32121/32253/64431/64431/64

in.order no.

800078802348800012802346800056804546804547804549804548

mm in.

2.533345568

5/825/3215/1617/64117/64149/64261/64421/64417/32

d lmm

16202428324575110115

3/321/81/81/85/32

13/6413/641/45/16

in.AFin. in in.

D dmm

AFin.

——

5/16—————

Internalhex. screws

Threaded pinswith internal hex. drive

order no.

804515804516804538804539804539804540804540804517

55

External hex. drive E11.2 DIN 3126 (7/16”)

AFmm

5681010121214

C E R T I F I E D A S P E R D I N E N I S O 9 0 0 1

DEPRAG SCHULZ GMBH u. CO.P.O. Box 1352, D-92203 Amberg, GermanyKurfürstenring 12–18, D-92224 AmbergPhone (0 96 21) 371-0, Fax (0 96 21) [email protected]

inserting tools for screwdriversd 3320 e 06.2010 inserting tools for screwdrivers bits sockets...

Documents