industrial presentation on 509

Upload: varish-gupta

Post on 14-Apr-2018

217 views

Category:

Documents


0 download

TRANSCRIPT

  • 7/28/2019 Industrial Presentation on 509

    1/15

    INDUSTRIALPRESENTATION ON

    509,ARMY BASE WORKSHOP

    AGRA

    Presented By:-

    KULDEEP SINGH

    Roll no. 0706331059

  • 7/28/2019 Industrial Presentation on 509

    2/15

    Introduction To 509,Army Base Wksp.

    Electronics base repair and Overhaul agency ofIndian Army.

    Established on 1st May, 1993.

    ISO 9001:2000 certified.

    Functional groups :Works

    Production

    Administration.

  • 7/28/2019 Industrial Presentation on 509

    3/15

    Departments of 509 ABW

    Group Description

    GE GP General Engineering Group

    RADAR GP Radar Equipment

    TL GP Telecommunication Group

    IN GP Instruments Group

    M&R GP Manufacturing & Reclamation

  • 7/28/2019 Industrial Presentation on 509

    4/15

    Group Description

    ARCC Army Repair & Calibration Cell

    FCRC Repair of Computers

    CES Complete Expandable Stores

    MCO Material Control Organization

  • 7/28/2019 Industrial Presentation on 509

    5/15

  • 7/28/2019 Industrial Presentation on 509

    6/15

    Differential GPS

    Based on principle that GPS receiver on ground in a known

    location, acts like a static reference point

    Transmits the error correction message to other GPSreceiver to improve results.

    POSITIONING ERRORS:

    Correctable errorsNon Correctable errors

    Provides advantage of

    selective ability

  • 7/28/2019 Industrial Presentation on 509

    7/15

    MINE DETECTING SET

    Detect mines and unexploded ammunitions.

    Operating temperature : -30 degree to +55 degree .

    Operating principle : Building up a magnetic field via

    electric pulse to produce secondary field which is

    picked by a receiver coil.

  • 7/28/2019 Industrial Presentation on 509

    8/15

    Harmonic Radar: Super Broom

    Detects electronic components such as diodes, transistors, ICs

    etc.

    Does not react to components that do not contain

    semiconductor materials.

    Signal generated is pure radio

    signal with a freq. of888.5 MHz for 1st harmonic

    1777 MHz for 2nd harmonic

    2666.5 MHz for 3rd harmonic

  • 7/28/2019 Industrial Presentation on 509

    9/15

    TIDEX(Exchange Telephone Automatic)

    Up-controlled TDM exchange

    CAPACITY: (40+12) (80+24) (160+48)

    COMPONENTS:

    PAS unitSubscriber unit

    Operator console

    Junction box

    Line termination box

    FACILITIES:

    call priority

    time out

    unconnected line indication

  • 7/28/2019 Industrial Presentation on 509

    10/15

    Automatic Electronic Switch(AES)

    Integrated modular switch

    Provides voice & data communication service

    Uses two signals-

    Hook

    Highway.

    Uses real time operating system(irk)

    AES is of two types:

    1). AES mark 1:-capacity 32cd,

    192 voice channels,256 teleprinters.

    2). AES mark 2:-capacity 60cd,

    360 voice channels, 480 teleprinters

  • 7/28/2019 Industrial Presentation on 509

    11/15

    STARS-V

    operating frequency band : 30 to 87.975 MHz

    channel spacing. 25 KHz

    No. Of channels: 2320

    Modulation scheme: FM

    Modules:

    Power Amplifier (A2)Regulator (A3)

    Reciever (A4)

    Synthesizer (A5)

    CPU (A6)

    Display Unit (A8)

  • 7/28/2019 Industrial Presentation on 509

    12/15

    PROJECTLaser-based Perimeter Protection System

    Transmitter

    TRANSMITTER- CIRCUIT

  • 7/28/2019 Industrial Presentation on 509

    13/15

    Receiver

    RECEIVER CIRCUITR

  • 7/28/2019 Industrial Presentation on 509

    14/15

    Working:

    This laser based perimeter protection systemhaving -9 to +9 volt DC supply system.Transmitter card consists-IC LM/NE 567,LF 356.Receiver is tuned to the transmitter's

    frequency.IC 567 is a CCO which generate a pulsedwaveform of frequency1 k Hz.Value of frequency is set by (1.1/R1C1).

    IC356 & transistor (2N2222) is a output drivercircuit.

  • 7/28/2019 Industrial Presentation on 509

    15/15

    It drive the laser diode with a pulse amplitude 3V.

    When an intruder tries to cross the unauthorized

    Area or boundary, then the LASER link betweenthe transmitter and receiver is broken.

    When laser beam is interrupted, diode act as open

    circuit.Thus o/p of NIV amplifier become Low.

    The pin-8 ofic goes LOW and the alarm connectedvia Buzzer is switched ON.

    So the protection system is fool-proof and highlyreliable.