indian standard is code
TRANSCRIPT
BIS CODE : INDIAN STANDARD for Structural Engineering
IS: 800-1984 Code for practice for general construction in steel.
SP6 (1) Handbook for structural steel sections.
SP:6(5)-1980 Hand book for Cold formed, Light Gauge steel structures.
SP:6(6)-1972 Handbook for application of plastic theory in design of steel structures.
SP:6(4)-1969 Project & Construction Management for Large Industrial Projects.
IS: 206 -1992 (4th Rev) Tee & strap hinges - Specification.
IS: 459 -1992 (3rd Rev) Corrugated & non-corrugated asbestos cement sheets - Specification.
IS: 730 -1978 (2nd Rev) Hook bolts for corrugated sheet roofing - Specification.
IS: 801 -1975 (1st Rev) Code of Practice for use of cold - formed light gauge steel structural members in general building construction.
IS: 802 -1977 (2nd Rev) Code of Practice for use of structural steel in (Part-1) overhead transmission line towers - Loads and permissible stresses.
IS: 804 -1967 (1st Rev) Rectangular pressed steel tanks - Specification.
IS: 806 -1968 (1st Rev) Code of Practice for use of steel tubes in general building construction.
IS: 808 -1989 (3rd Rev) Dimension for hot rolled steel beam, channel and angle sections.
IS: 811 -1987 (2nd Rev) Cold formed light gauge structural steel section - Specification.
IS:813 -1986 (1st Rev) Scheme of symbols for welding.
IS: 814 -1991 (5th Rev) Specification for covered electrodes for manual metal arc welding of carbon & carbon manganese steel.
IS: 822 -1970 Code of procedure for inspection of welds.
IS: 875 -1987(2nd Rev)
(Part 1)
(Part 2)
(Part 3)
(Part 4)
(Part 5)
Code of Practice for design loads for buildings & structures.
Dead loads
Imposed loads.
Wind loads.
Snow loads.
Special loads & load combinations.
IS:1024 -1979 (1st Rev) Code of Practice for use of welding in bridges and structures subjected to dynamic loading.
IS:1038 -1983 (3rd Rev) Specification for steel doors, windows & ventilators.
IS:1081 -1960 Code of Practice for fixing & glazing of metal doors, windows and ventilators.
IS:1148 -1982 (3rd Rev) Specification for hot rolled steel rivet bars (Up to 40 mm diameter).
IS:1161 -1979 (3rd Rev) Specification for steel tubes for structural purposes.
IS:1182 -1983 (2nd Rev) Recommended practice for radiographic examination of fusion welded butt joints in steel plates.
IS:1254 -1991 (3rd Rev) Specification - Corrugated aluminium sheet.
IS:1323 -1982 (2nd Rev) Code of Practice for oxyacetylene welding for structural work in in mild steel.
IS:1361 -1978 (1st Rev) Specification for steel windows for industrial buildings.
IS:1363 -1992 (3rd Rev) (Parts 2 & 3)
Hexagon head bolts, screw and nuts of product grade C-Screw (M5 to
M64)
IS:1364 -1992 (3rd Rev) (Part 4)
Hexagon head bolts, screws and nuts of product grade A and B - Thin nuts (M1.6 to M64)
IS:1395 -1982(3rd Rev) Specification for low & medium alloy steel covered electrode for metal arc welding.
IS:1477 -1971(1st Rev) Code of Practice for painting offerrous metal in buildings.
(Part 1)Pretreatment
(Part 2)Painting
. IS:2062 -1992 (4th Rev) Specification for steel for general structural purposes.
IS:3443 -1980(1st Rev) Specification for crane rail section
IS:3548 -1988(1st Rev) Code of Practice for glazing in buildings.
IS:3600 Part 1 -1985Part 3 -1984Part 4 -1984Part 5 -1983Part 6 -1983Part 7 -1985Part 8 -1985
Method of testing fusion welded joints and weld metal in steel.
IS:3757 -1985(2nd Rev) Specification for high strength structural bolts.
IS:3964 -1980(1st Rev) Specification for light rails.
IS:4000 -1992 (1st Rev) High strength bolts in steel structures.
IS:4049 -1988 (2nd Rev) (Part 1) Specification for formed ends for tanks and pressure vessels.
IS:4260 -1986(2nd Rev) Recommended practice for ultrasonic testing of butt welds in ferritic steel.
IS:4351 -1976(1st Rev) Specification for steel door frames.
IS:5504 -1969 Specification for spiral welded pipes.
IS:5872 -1990(2nd Rev) Specification for cold rolled steel
strips.
IS:6533 -1989(1st Rev)
(Part 1)
(Part 2)
Code of Practice for design and construction of steel chimney.
Mechanical aspect
Structural aspect
IS:6623 -1985(1st Rev) Specification for high strength structural nuts.
IS:6649 -1985(1st Rev) Specification for hardened and tempered washers for high strength structural bolts and nuts.
IS:7205 -1974 Safety code for erection of structural steelwork.
. IS:7215 -1974 Tolerances for fabrication of steel structures.
IS:8500 -1991(1st Rev) Specification for micro-alloyed structural steel.
IS:8629 -1977 Part (1 & 3) Code of Practice for protection of iron and steel structures from atmospheric corrosion.
IS:9172 -1979 Recommended design practice for corrosion prevention of steel structures.
IS:9178 -1979
(Part 1)
(Part 2)
Criteria for design of steel bins for storage of bulk materials.
General requirements & assessment of loads.
Design criteria.
IS:9417 -1989 (1st rev) Welding of cold rolled steel bars for reinforcement concrete construction.
IS:12040-1987 Guidelines for development of vendor rating systems.
IS:12843-1989 Tolerances for erection of steel structures.
Free Engineering Services by IIT Alumni Ranchi Chapter