4. Installing ICS telecomWarning ! For an update, first un-instal ICS telecom from the PC, then run the installation with the updated version.1- Put the dongle provided with the CD-ROM on the USB port of your PC2- With a parallel dongle, switch on the printer possibly installed on the parallel port3- Insert the ICS telecom CD-Rom in the CD driver4- Launch the «Run» command of «Start» menu5- Choose via the option «Browse», the «ICSTEL8.exe» file 6- The installation is launched, follow the on-screen instructionsNote: During the installation process, you have the choice of the destination directory. By default, the system offers the following location : C:\Program files \ICS telecom\ but this location may be changed.A new program folder ATDI Software/ICS telecom nG has thus been created.7- Un-installing the program can be done via the option «Uninstall ICS telecom nG» of the ICS telecom nG program folder or via the configuration panel: choice Add/Remove Programs5. Installing runtime libraries1- Insert the ICS telecom CD-Rom in the CD driver2- Launch the «Run» command of «Start» menu3- Choose via the option «Browse», the «vcredist_x86.exe» file 4- The installation is launched, follow the on-screen instructions6. Dongle driver So that the dongle is recognized by your machine, the driver must be installed: Installing drivers for a standalone USB dongle: 1- Install the dongle and ICS telecom as described above2- Insert the SuperPro dongle driver CD-Rom in the CD driver3- Launch the «Run» command of «Start» menu4- Choose via option «Browse» the file named «SPNComboInst1.0.5.exe» stored in the «Rainbow Su-perProNet Driver» directory of the CD-rom.5- The Installshield wizard is launched. Follow the on-screen instructions6- At the end of the installation process, a message will offer to restart or not your computer. We recom-mand to restart the computer.Installation is completed.Installing drivers for a network USB dongle: 1- Install the dongle on the USB port of the server machine2- Insert the SuperPro CD-Rom given with the network dongle. 3- Launch the «Run» command of «Start» menu4- Choose via option «Browse» the file named «SPNComboInst1.0.5.exe» stored in the «Rainbow Su-perProNet Driver» directory of the CD-rom5- Theinstallation is launched, follow the on-screen instructions6- At the end of the installation process, a message will offer to restart or not your computer. We recom-mand to restart the computer.Installation is completed.A new program folder is created: Rainbow technologies / SPN Combo Installer / 1.0.5 /This folder contains a specific program dedicated to network dongles management, the Monitoring tool, that controls the access to the dongle.This program must be permanently running on the server machine in order to give access to the dongle to any workstation connected on the network. Otherwise, no user will be allowed to use ATDI application.

ICS telecom nG - Install instructionsSeveral steps are required to completely install ICS telecom on the hard drive:Step 1 - installing the ICS telecom softwareStep 2 - installing runtime librariesStep 3 - installing the dongle driver.Step 4 - installing of the HCM DLL package (optional).

1. Hardware and software requirements- IntelTM PentiumTM III (or more) PC- Hard Disk: 20 Gb minimum- Random Access Memory (RAM): 256 Mb minimum- Multi-synch Graphics Display Screen- Graphic card: 1280*1024 - 256 colours non- interlaced colours or 1024*768 - 256 non- interlaced colours - 64 Mb graphic memory (3D)- Microsoft© Mouse (recommended)- Operating systems: WINDOWS 2000 (Service Pack 4) or WINDOWS XP or WINDOWS XP64 or WINDOWS Vista or WINDOWS Vista 64

IMPORTANTThe nG version is ready for 64 bitsThis mode can generate different coverage results using some of the propagation models compared to results obtained with former versions of ICS telecom.

2. Control of settingsSome controls must be done before installation:- Display of files in MSTM WindowsTM: to allow the reading and the copy of files, it is recommended to confi-gure the files display in the MSTM Explorer: go to View menu, then choose Options. Go to the View tab and select ‘show all files’ option for ‘hidden files’.- For WindowsTM 2000 / XP system: before running the installation, check that your PC is log on ‘Administra-tor’, otherwise the dlls will not be copied correctly..- Display properties: choose 1024*768 or 1280*1024 display resolution.- Program installation: to allow installation of the different libraries (dll), the machine must have a «C:\» driver. 3. Notes- Using modes: ICS telecom can be used locally (stand-alone dongle) or on a LAN (multi-licenses and multi-users dongle). In multi-licenses mode, the application and its dongle are installed on a server that gives access to a given number of simultaneous users. To work in client/server mode, the MS WindowsTM function ‘create semaphore’ is no more used. The principle is : the APPICSHTZ.log file that allows the manage-ment of simultaneous clients is stored in the ICS telecom directory, and its update does not require the MS WindowsTM controls. In case of critical stop of the application, the .log file is not decremented and will be incremented at each new user’s logg in. To avoid these increments, it is necessary to delete the APPICSHTZ.log file with all ICS telecom working session closed.- Printers: In ICS telecom, several dialogue boxes require the presence of printer drivers on the machine. When opening one of these dialogue boxes and if no printer driver is installed on the machine, a system error may occur. It is necessary then to install at least one printer driver on the machine. Likewise, the modifi-cation of a local or network printer may cause printing errors. In this case: 1. Close ICS telecom2. In the WindowsTM Start menu, choose Run, enter ‘REGEDIT’ and confirm3. The Register editor window is open4. Go in the HKEY_LOCAL_MACHINE\Software\ATDI folder - this folder contains a sub-directory named ‘Printi’ that is automatically generated during the software installation5. Delete ‘Printi’ sub-directory - it will be recreated at the next use of ICS telecom6. Close the Register editor window and restart the machine7. Run ICS telecom and try to print.