iccheas 2019iccheas.unsyiah.ac.id/wp-content/uploads/bop.pdf · the theme is timely and in line...
TRANSCRIPT
ICChEAS 2019The International Conference on Chemical Engineering and Applied Sciences
Chemical Engineering Dept.
Riau University
Faculty of Chemical Engineering
Universiti Teknologi MARA
Vocational School
Diponegoro University
Chemical Engineering Dept.
Syiah Kuala University
Book of ProgramBook of ProgramBook of Program
23-24 October 2019Banda Aceh, INDONESIA
Theme:Strengthen Innovative Chemical Engineering
and Applied Sciences in the Digital Age
The International Conference on Chemical
Engineering and Applied Sciences (ICChEAS)
Theme:
“Strengthen Innovative Chemical Engineering and Applied Sciences in the Digital Age”
BOOK OF PROGRAM
Banda Aceh, Aceh, Indonesia October 23-24th, 2019
1
About the Conference
The International Conference on Chemical Engineering and Applied Sciences (ICChEAS) 2019 is
a biennial scientific event to accommodate academic and professional communities to
discuss and exchange ideas. Previously, the ICChEAS was known as International Conference on
Chemical Engineering Sciences and Applications (ICChESA), which was held recently in 2017
(http://icchesa.unsyiah.ac.id/). Since its first conference in 2013, it has attracted many scholars,
scientist, experts, practitioners and graduate students from various countries to participate in. This
indicates that the conference is one of the best international scientific events in Indonesia which
provides a platform for chemical engineers, scientists and related academic communities as well as
practical professionals from different countries to discuss research results, share experiences and
exchange ideas.
The ICChEAS 2019 took place in Banda Aceh, the Province of Aceh, Indonesia during 23-24
October 2019 is organized by the Chemical Engineering Department, Syiah Kuala University,
Indonesia together with to the Faculty of Chemical Engineering, Universiti Teknologi MARA
(UiTM) Malaysia, the Department of Chemical Engineering of Riau University (UNRI) Indonesia,
and Vocational School, Diponegoro University (UNDIP) Indonesia. This ICChEAS 2019 theme is
“Strengthen Innovative Chemical Engineering and Applied Sciences in the Digital Age”.
The theme is timely and in line with the UN Sustainable Development Agenda 2030. With a
drastic increase in world population, especially in urban areas, food and energy consumption
increases correspondingly, which consequently will exacerbate the pressure on our world’s
resources and environments. Four current central issues, i.e, increasing population, food, energy,
and resources and environment are challenging aspects in which chemical engineering and applied
sciences and its related disciplines have to play an important role in finding solutions for the
benefit of future generation. Development of green technology, process, products, and energy for
such solutions will generate significant business opportunities and stimulate digitalized
technological innovation and at the same time will ensure sustainable development and preserve
the environment for the next generations.
The objective of the ICChEAS 2019 is to gather the scientists, researchers, scholars, educators,
professionals, and students in different fields of chemical engineering and applied science from
ASEAN and beyond to share knowledge, exchange ideas, and explore possibilities of building
cooperation networking. The 1rst ICChEAS 2019 would become an ideal international platform for
participants to share their knowledge and experiences. Undergraduate, as well as graduate students,
and young participants are encouraged to participate as this would be a unique opportunity to gain
new advances in the fields of chemical engineering, applied science and its related subjects
VENUE: Hermes Palace Hotel
Jl. T. Panglima Nyak Makam, Lambhuk, Kec. Ulee Kareng, Banda
Aceh, Aceh 23117
Telepon: (0651) 7555888
2
Table of Content About the Conference
1
Table of Content
2
Organizing Committee
3
Editorial Team
3
Scientific Committee
4
Message from the Rector of Syiah Kuala University
5
6666
Message from the Dean of Faculty of Engineering, Syiah Kuala University
5
Welcome Message from the Head of Chemical Engineering Department, Syiah Kuala
University
6
Welcome Message from the Chairman of the ICChEAS 2019
6
Keynote Speaker 1 8
Keynote Speaker 2 8
Keynote Speaker 3 9
Invited Speaker 1 9
Invited Speaker 2 9
Invited Speaker 3 10
Invited Speaker 4 10
Program Outline 11
Parallel schedule
12
Book of Abstrak 20
Keynote and Invited Speaker Abstract
21
Book of abstracts Polymer, Membrane, Composite, And Nanotechnology
25
Book of abstracts Chemical Engineering Fundamentals and Applied Chemistry
33
Book of abstracts Biotechnology/Biochemical Engineering/Environmental Engineering
49
Book of abstracts Catalysis and Catalytic Reaction Engineering, Process Control and
Modelling
58
3
Organizing Committee
Advisory Chairman Prof. Dr. Ir. Samsul Rizal, M.Eng (Rector)
Dr. Ir. Taufiq Saidi, M.Eng. (Dean of Faculty of Engineering)
Dr. Ir. Darmadi, MT (Chairman of Chemical Engineering Department)
Chairman
Prof. Dr. Abrar Muslim, ST., M.Eng
Co-Chairman
Dr. M. Faisal, ST., M.Eng
Secretary and Registration Division Prof. Dr. Muhammad Dani Supardan, ST., MT.
Treasurer Dr. Ir. Cut Meurah Rosnelly, MT.
Dr. Ir. Yanna Syamsuddin, M.Sc.
Publicity Division
Dr. Ir. Yunardi, MA.Sc.
Prof. Dr. Ir. Sri Aprilia, MT.
Prof. Dr. Nasrul Arahman, ST. MT.
Prof. Dr. Husni Husin, MT.
Promotion Division
Wahyu Rinaldi, ST., M.Sc.
T. Mukhriza, ST., M.Sc.
Sponsorship Division Dr. Syaifullah, ST., M.Eng.
Dr. Nasrullah, ST., MT.
Logistic and Exhibition Division Dr. Farid Mulana, ST., M.Eng.
Dr. Fachrul Razi, ST., MT.
Dr. Azwar, ST.M.Eng.Sc.
Transportation Division
Prof. Dr. Mahidin, ST, MT.
Dr. Ir. Asri Gani, M.Eng.
Event and Program Division Dr. Sri Dr. Mulyati,
ST., MT.
Sofyana, ST., MT.
Suraiya, ST., MT.
Food and Beverage Division
Ir. Pocut Nurul Alam, MT.
Zuhra, ST. M.Sc.
Editorial Team
Dr. Ir. Yunardi, MA.Sc.
Prof. Dr. Nasrul Arahman, ST. MT.
Prof. Dr. Husni Husin, MT
Prof. Dr. Muhammad Dani Supardan, ST., MT
4
Scientific Committee
1. Prof. Moses O. Tade, PhD. (School of Minerals, Energy and Chemical Engineering, Faculty of Science and Engineering, Curtin University, Australia)
2. Prof. Dr. Shaobin Wang (School of Minerals, Energy and Chemical Engineering, Faculty of Science and Engineering, Curtin University, Australia)
3. Prof. Dr. Hiroyuki Daimon (Department of Environmental and Life Sciences, Toyohashi University of Technology, Japan)
4. Prof. Dr. Zuchra Helwani (Department of Chemical Engineering, Engineering Faculty, Riau University, Indonesia)
5. Prof. Mahmud Subandriyo, PhD. (Department of Chemical Engineering, Engineering Faculty, Indonesia University, Indonesia)
6. Prof. Dr. Herri Susanto (Department of Chemical Engineering, Engineering Faculty, Bandung Institute of Technology, Indonesia)
7. Prof. Dr. Maizirwan Mel (Department of Biotechnology Engineering, Faculty of Engineering, International Islamic University, Malaysia)
8. Prof. Dr. Arief Budiman (Department of Chemical Engineering, Engineering Faculty, Universitas Gadjah Mada, Indonesia)
9. Prof. Dr. Mohd. Ali Hassan (Department of Bioprocess Technology, Universiti Putra Malaysia, Malaysia)
10. Prof. Norazah Abd. Rahman (Faculty of Chemical Engineering, Universiti Teknologi MARA, UiTM, Malaysia)
11. Prof. Dr. José M. Encinar (Department of Chemical Engineering and Physical Chemistry, Extremadura University, Spain)
12. Dr. Atikah Kadri (Faculty of Chemical Engineering, Universiti Teknologi MARA, UiTM, Malaysia)
13. Prof. Dr. Ir. Budiyono (Vocational School, Diponegoro University, Indonesia) 14. Prof. Dr. Edy Saputra ((Department of Chemical Engineering, Engineering Faculty, Riau
University, Indonesia) 15. Assoc. Prof. Dr. Faisal Abnisa (Department of Chemical and Materials Engineering, King
Abdulaziz University, Saudi Arabia) 16. Assoc. Prof. Johann Fellner (Department of Waste and Resource Management, Vienna University
of Technology, Austria) 17. Assoc. Prof. Yasumasa Tojo, PhD. (Laboratory of Solid Waste Disposal 18. Engineering, Hokkaido University, Japan 19. Dr. Didin Agustian (School of Environment, Resources and Development, Asian Institute of
Technology, Bangkok) 20. Dr. Hanggara Sudrajat (Department of Chemistry, Graduate School of Science, Kobe University,
Japan) 21. Dr. Wichitra Singhirunnusorn (Faculty of Environment and Resource Studies, Mahasarakham
University, Thailand) 22. Dr. Chutimon Satirapipathkul (Department of Chemical Engineering, Engineering Faculty,
Chulalongkorn University, Bangkok Thailand) 23. Prof. Dr. Bastian Arifin, M.Sc (Department of Chemical Engineering, Engineering Faculty, Syiah
Kuala University, Banda Aceh) 24. Prof. Dr. Medyan Riza, M.Eng. (Department of Chemical Engineering, Engineering Faculty,
Syiah Kuala University, Banda Aceh) 25. Prof. Dr. Marwan (Department of Chemical Engineering, Engineering Faculty, Syiah Kuala
University, Banda Aceh) 26. Prof. Dr. Husni Husin, MT. (Department of Chemical Engineering, Engineering Faculty, Syiah
Kuala University, Banda Aceh) 27. Prof. Dr. Morina Adfa (Department of Chemistry, Bengkulu University, Indonesia) 28. Prof. Dr. Irvan, MT (Department of Chemistry, North Sumatera University, Medan) 29. Prof. Dr. Rosdanelli Hasibuan (Department of Chemical Engineering, North Sumatera University,
Medan) 30. Dr. Izarul Machdar, M.Eng. (Department of Chemical Engineering, Engineering Faculty, Syiah
Kuala University, Banda Aceh) 31. Dr. Syaifullah Muhammad, ST., M.Eng. (Department of Chemical Engineering, Engineering
Faculty, Syiah Kuala University, Banda Aceh) 32. Dr. Teuku Rihayat (Department of Chemical Engineering, State Polytechnics of Lhokseumawe,
Lhokseumawe)
5
Message from the Rector of Syiah Kuala University
Assalamu’alaikum warahmatullahi wabarakatuh,
May the peace, mercy, and blessings of Allah be with you,
First of all, on behalf of Syiah Kuala University, it is my great honor to welcome all of you to
Banda Aceh, Indonesia to participate either as a speaker or listener in the International Conference
on Chemical Engineering and Applied Sciences (ICChEAS) 2019.
An International academic conference is one of the best gathering platforms to expose and
disseminate research findings as well as receiving feedbacks from those working in similar fields, as
it is the place where researchers from academic and engineers from industrial sectors can exhibit
their research works to public, gain new knowledge and exchange ideas, and establish new
networking. Hosting international conferences is in line with the policy and strategy of Syiah Kuala
university in terms of promoting outcomes of the research to national and international academic
and industrial communities. In addition, the university also supports its staffs to present his or her
research at international level overseas.
The 1st ICChEAS conference aims at bringing together chemical engineers from Indonesia as well
as from ASEAN and beyond, both in academic and industrial sectors, to share their fundamental
knowledge and recent applications relevant to the field of chemical engineering. I wish that the 1st
ICChEAS will not only become a place to share your research outcomes, but also be a step for
establishing academic cooperation among participant’s institution.
In addition to attending the conference, I encourage you to explore the city of Banda Aceh.
Although it was badly hit by earthquake and tsunami in 2004, toda y the city has fully recovered.
However, you are still able to witness several tsunami remnants around the city. I wish every one
of you a fondest memory of the 1st ICChEAS, an enjoyable time in Banda Aceh, and a safe trip back
home.
Prof. Dr. Ir. Samsul Rizal, M.Eng
Message from the Dean of Faculty of Engineering,
Syiah Kuala University
Assalamu’alaikum warahmatullahi wabarakatuh,
May the peace, mercy, and blessings of Allah be with you,
First of all, on behalf of Syiah Kuala University, it is my great honor to welcome all of you to
Banda Aceh, Indonesia to participate either as a speaker or listener in the 1st International
Conference on Chemical Engineering and Applied Sciences (ICChEAS) 2019.
An International academic conference is one of the best gathering platforms to expose and
disseminate research findings as well as receiving feedbacks from those working in similar fields, as
it is the place where researchers from academic and engineers from industrial sectors can exhibit
their research works to public, gain new knowledge and exchange ideas, and establish new
networking. Hosting international conferences is in line with the policy and strategy of Syiah Kuala
university in terms of promoting outcomes of the research to national and international academic
and industrial communities. In addition, the university also supports its staffs to present his or her
research at international level overseas.
6
The 1st ICChEAS conference aims at bringing together chemical engineers from Indonesia as well
as from ASEAN and beyond, both in academic and industrial sectors, to share their fundamental
knowledge and recent applications relevant to the field of chemical engineering. I wish that the 1st
ICChEAS will not only become a place to share your research outcomes, but also be a step for
establishing academic cooperation among participant’s institution.
In addition to attending the conference, I encourage you to explore the city of Banda Aceh.
Although it was badly hit by earthquake and tsunami in 2004, today the city has fully recovered.
However, you are still able to witness several tsunami remnants around the city. I wish every one
of you a fondest memory of the 1st ICChEAS, an enjoyable time in Banda Aceh, and a safe trip back
home.
Dr. Ir. Taufiq Saidi, M.Eng.
Welcome Message from the Head of Chemical
Engineering Department, Syiah Kuala University
Assalamu’alaikum warahmatullahi wabarakatuh,
May the peace, mercy, and blessings of Allah be with you,
It is a great pleasure to have you here participating in the International Conference on Chemical
Engineering and Applied Sciences (ICChEAS) 2019.
From historical point view, chemical engineering has successfully played a key role in the
developments of traditional chemical and petro-chemical industries. At present time, modern
society is experiencing a number of threats, including the declining of energy and food supplies
and the deterioration of environment. Consequently, the current and future challenges for the
chemical engineering have to focus among others on the development of green industry with
zero waste, innovations in the developments of new alternative renewable energy resources,
and security of food supply and protection of environment for sustainable development. To
respond to these issues and to develop the science of chemical engineering in a sustainable fashion,
it is necessary that we have to look at the situation in all aspects and take everything into
consideration.
I would like to express my sincere gratitude towards chemical engineering staffs and students as
well as everyone who takes part in making this conference a success. I also would like to
thank you those who joined us. Finally, I wish you all a pleasant time in Aceh, Indonesia.
Dr. Ir. Darmadi, MT
7
Welcome Message from the Chairman of the ICChEAS 2019 Assalamu’alaikum warahmatullahi wabarakatuh,
May the peace, mercy, and blessings of Allah be with you,
On behalf of the organizing committee, it is a great pleasure and honor, to warm welcome all
participants to the first International Conference on Chemical Engineering and Applied Sciences
(ICChEAS) (1th ICChEAS 2019), held at the Hermes Palace Hotel, Banda Aceh, Indonesia on
23 – 24th October 2019.
To answer the increase of world population and the current over-consumption of the biological
resources with fast production and adaptation to the ever-changing market requests and global
competition, we need radical advances in present manufacturing technology which is called as Industry
4.0. This promising approach is based on integration of the industrial and business processes. Having
these issues in mind, the 1th ICChEAS 2019 conference becomes more timely than ever. Chemical
Engineers and Applied Scientists are now challenged to change the perception from more traditional
automation to a fully connected and flexible production system with the environment protection and
sustainability. Industry 4.0 transforms the industrial manufacturing through digitalization of new
technologies.
This year’s 1th ICChEAS 2019 theme is “Strengthen Innovative Chemical Engineering and Applied
Sciences in the Digital Age”. The conference will bring together researchers and academic experts
in the field of chemical engineering, science and technology to meet, exchange ideas, interact and
discuss the state of art of advanced research, development and technology related to food, energy
and water for in the digital age of Industry 4.0.
Since the beginning, I have received a lot of supports to materialize this conference. I wish to express
my deep gratitude to the Faculty of Chemical Engineering, Universiti Teknologi MARA (UiTM)
Malaysia, the Department of Chemical Engineering of Riau University (UNRI) Indonesia, and
Vocational School, Diponegoro University (UNDIP) Indonesia. But foremost, the success of a
conference relies mainly on organizing committee, national and international scientific committees,
keynote and invited speakers, and all the participants. I therefore would like to thank you all.
Prof. Dr. Abrar Muslim, ST., M.Eng.
8
The International Conference Chemical Engineering and Applied Sciences 2019
Keynote Speaker 1
Prof. Dr. Ku Halim Bin Ku hamid
Faculty Of Chemical Engineering
Universiti Teknologi Mara, 40450 Shah Alam, Selangor, Malaysia
Ku Halim Ku Hamid is a senior professor of Faculty of Chemical Engineering, Universiti Teknologi MARA, Shah
Alam, Selangor, Malaysia. He received degrees of BSc and MSc from National University of Malaysia (UKM) and
PhD from The University of Sheffield, UK. His research interest are catalyst and catalysis, waste management,
green energy, biotechnology, advanced material, natural product extraction and wastewater treatment. He had
published about 300 technical papers and an owner 26 of patents, besides that he had received more than 280 of
invention and innovation awards from various parts of the world including award from World Intelectual Propery
Organization (WIPO). His research Bacterial Embedded of Oil Spill Absorber was a winner of University-
Industrial Collaboration, in conjunction with Prime Minister National Quality Award in 2008. Ku Halim was
awarded The Outstanding Inventor Award in Malaysia Technology Expo 2017 for his national and intentional
involvement in invention and innovation activities. He was appointed in various technical committees as an expert
panel in various government ministries and agencies in Malaysia such as Ministry of Higher Education, Ministry
of Science, Technology (MOSTI) and Innovation and Ministry of Urban Wellbeing, Housing and Local Authority.
Ku Halim also was invited to share his experience in innovation activities by various institutions and appointed as
Icon Scientist by MOSTI and Government of Sarawak for School Science and Technology program. He is the
author of a book entitled Enhancing of World of Fragrance through Malaysian Bio-Gaharu and was translated to
Mandarin for Chinese market. He is also the co-author of the Book entitled Smart Advisory System Application
for Hazardous Waste Management. His commercialization activities were narrated in a book entitled Wealth
Creation from Commercialization of R&D Products: Real Life of Experiences of Malaysian Researchers, published
by UTeM.
Keynote Speaker 2
Dr. Ryosuke Takagi (Prof. Emeritus)
Research Center for Membrane and Film Technology, Kobe University - Japan
Dr. TAKAGI Ryosuke was born on February 10th, 1947. In 1977, he started the study in a membrane field as a
researching staff under the tutelage of Prof. Nakagaki of the graduate school of pharmaceutical sciences, Kyoto
University. His major was the theoretical work relating the modeling of membrane, especially the membrane charge
and the ion flux through charged membrane. He made clear the effect of asymmetric nature of membrane on a
membrane potential and an ion flux (Chem. Pharm. Bull., 32(1984)3812 〜 3823). He first suggested that an
adsorption of ions affected a membrane charge (J. Membr. Sci., 53(1990) 19〜35) and has proposed the advanced
amphoteric membrane model in which the membrane charge is determined by the dissociation of ionic groups of
membrane material and the adsorption of ions (Sep. Purif. Technol., 25 (2001) 369~377). This model has been
widely accepted as a membrane model.
After he moved to Kobe University in 2008, he joined the NEDO project (project number P93048) as a member of
Kobe University to make a tap water from a ground water in Beijing, China, cooperating with Prof. X-L Wang in
Tsinghua University, Beijing Waterworks group, Asahi-kasei Co., Japan, and Astom Corporation, Japan. Since
then, he has engaged to improve a performance of ion exchange membrane, especially anion exchange membrane.
He modified commercial anion exchange membrane with Layer-by-Layer method, and polydopamine and
succeeded to simultaneously improve an antifouling property and a monovalent anion selectivity.
9
The International Conference Chemical Engineering and Applied Sciences 2019
Keynote Speaker 3
Prof. Dr. Maizirwan Mel
Department of Biotechnology Engineering, Faculty of Engineering, IIUM Malaysia
Maizirwan Mel is an Assoc. Professor at the Department of Biotechnology Engineering, Faculty of Engineering,
IIUM Malaysia. He obtained his Ph.D in Bioprocess Engineering from UTM Johor in 2002. His research interests
are in the areas of Optimization, Simulation and Modeling of Bioprocess, Fermentation Kinetics and Design,
Biologics Separation and Purification, and Biomanufacturing, Bioenergy Technology and Engineering. He has over
17 year’s experience in teaching Biotechnology Engineering Laboratory IV, Bioprocess Facility Design and
Regulatory, Biopharmaceutical Manufacturing, Cell Culture Engineering and Biomass Energy, Design and
Optimization Process Biotechnology, Biochemical Engineering Fundamental, Process Plant Design & Analysis.
Dr Maizirwan also serves as an Associate Editor Member for journal of Frontiers in Bioengineering and
Biotechnology (Section of Bioprocess Engineering), Chief Editor for Journal of Advanced Research in Biofuel and
Bioenergy, Editorial member for Journal of Advanced Research in Fluid Mechanic and Thermal Sciences. He is
also the editorial board of IIUM Naturals Sciences and Biological Engineering Journal. He has published over 160
papers in National and International conferences, 96 papers in SCOPUS and WoS indexed journals, 17 patents
filed, six patents granted (two in USA and four in Malaysia), two licensed technologies for industries. He is a
member of the Institution Engineers of Indonesia, IEI (1991-Present) and Member of Malaysian Board of
Technology (MBOT) Malaysia since July 2018. He was the Head of Department for Biotechnology Engineering
(2003-2004), Biotechnology Engineering Academic Adviser (2004-2005), Coordinator for Engineering Industrial
Training Unit of IIUM (2008-2011), and also former Deputy Dean of Innovation and Commercialization of the
Research Management Centre of IIUM (August 2011-September 2013). Now he is Chair of Bioprocess and
Molecular Engineering Research Unit (BPMERU).
Invited Speaker 1
Prof. Dr. Ir. Budiyono, M.Si
Chemical Engineering, Faculty of Engineering, Diponegoro University Indonesia.
Budiyono is a professor in Chemical Engineering, Faculty of Engineering, Diponegoro University Indonesia.
Currently he is dean of Vocational School Diponegoro University. He was born in February 20, 1966 in Blora,
Central Java. He completed his undergraduate education in Chemical Engineering at Diponegoro University in
1990 and became a lecturer staff in the same department since 1991. Then continued his graduate study at the
Chemical Engineering Department of the Faculty of Industrial Technology ITB Bandung, graduated in 1997 and
completed the Doctoral Program at Diponegoro University in 2010. The study is more focused in the field of waste
treatment and renewable energy technologies. He had published more than 50 technical papers in biogas production
with Scopus H-index 7 and Google Scholar H-index 14. The writer is also the Editor in Chief of the Waste
Technology Journal, International Journal of Science and Engineering (IJSE), International Journal of Engineering
Education (IJEE), and International Journal of Waste Resources (IJWR).
Invited Speaker 2 Prof. Dr. Norazah Abd. Rahman Faculty of Chemical Engineering, Universiti Teknologi MARA, Selangor, Malaysia.
Norazah Abd Rahman is a professor at Faculty of Chemical Engineering, Universiti Teknologi MARA, Shah Alam,
Selangor, Malaysia. She graduated from University of Missouri, Rolla in the United States with Bachelor of
Chemical Engineering and obtained her MSc in Non-Destructive Testing from University of Brunel, United
Kingdom. She then went to the Universiti Kebangsaan Malaysia where she was granted a PhD degree in Chemical
Engineering. At present she is a Fellow of Energy Institute, United Kingdom, Chartered Engineer in Energy and
10
The International Conference Chemical Engineering and Applied Sciences 2019
Petroleum Engineering and Professional Technologist from Malaysian Board of Technology. She also holds a
lifetime membership from Malaysian Society of Non Destructive Testing. She is a qualified Level 3 Ultrasonic
personnel, Industry National Expert in Ultrasonic, NDT (03-07) Programme MC-113-1 Ultrasonic Examination-
Welded Component (oil and gas) lecturer, examiner and invigilator. She is the Chief Editor for Malaysian Journal
of Chemical Engineering and Technology (MJCET) and the Editorial Board for International Journal of Research
in Engineering (IJRE). Her research interests include particle and separation processing, renewable energy and
environment and non-destructive testing. Up to date, she has obtained more than fifty research grants as Principal
and co–researcher including international grant of RMB 3,300,000 with Huazhong University of Science and
Technology (HUST) and Ministry of Science and Technology, CHINA. She has won several innovation awards
nationally and internationally including Obelix Award in British Invention Show, United Kingdom. Her leadership
and contribution towards the organisational development are being recognized and she was awarded with Anugerah
Kepimpinan Universiti Teknologi MARA in 2018.
Invited Speaker 3
Dr. Ir. Yunardi, MA.Sc.
Chemical Engineering Department of Syiah Kuala University
Dr. Yunardi received his Master degree in Biochemical Engineering at the University of Waterloo, Ontario, Canada
and obtained his doctoral degree focusing on combustion modelling from the University of Leeds, United Kingdom.
He has been teaching at bachelor and postgraduate level of the Chemical Engineering Department of Syiah Kuala
University for about 30 years. In addition to teaching, he also supervises research projects of bachelor, master and
doctoral students. He served as a visiting scholar and researcher at Tokyo Institute of Technology, Tokyo-Japan,
University of Kentucky Lexington, USA, University of Leeds, United Kingdom and Suleyman Demirel University,
Isparta, Turkey. During the period of 2012 to 2016, he temporarily left his academic job and worked for diplomatic
service, serving as the Education Attaché at the Embassy of the Republic of Indonesia in Bangkok, Thailand. He
came back to his academic position at the end of 2016. His research interest is mainly in the area of computational
fluid dynamics, particularly in the combustion and environmental engineering modellings.
Invited Speaker 4
Prof. Dr. Amun Amri, ST., MT.
Department of Chemical Engineering, University of Riau, Indonesia
Amun Amri is Professor at the Department of Chemical Engineering, University of Riau, Indonesia. He was born
in Bengkulu at January 31st, 1972. He received his ST and MT degrees from the Gadjah Mada University (UGM)
Yogyakarta Indonesia at 1996 and 2002, respectively, and PhD from Murdoch University Australia. His research
interests are advanced materials for renewable energy, graphene synthesis and applications, geopolymer composite,
adsorption, etc. He had published about 24 articles in reputable international journal Q-1, and 63 articles in
international Journal and proceedings, with Scopus H-index of 10. Besides that he had 5 patents. Amri was awarded
the international publication award for prime category of International collaboration from the Ministry of Research
and Higher Education, Republic of Indonesia at 2018. Prof Amri is also active in international research
collaboration with Murdoch University Australia, New Castle University of Singapore and University of Sains
Malaysia (USM) for research project of Superior, Low-cost and Durable Solar Selective Absorber Materials. Other
international activities are the reviewer of reputable international journals and co-supervisor of PhD student of
Murdoch University Australia.
11
The International Conference Chemical Engineering and Applied Sciences 2019
PROGRAM OUTLINE The International Conference Chemical Engineering And Applied
Sciences 2019 Hermes Palace Hotel, Banda Aceh - Indonesia
23 October 2019
Day 1: W e d n e s d a y , October 23, 2019 TIME DESCRI
PTION
PIC Venue
08.00 – 08.45 Registration Committee Hermes Palace Hotel
08.00-09.00 Paralel Session 1 Moderator Hermes Palace Hotel
09.00 – 10-25
Opening Ceremony Committee Hermes Palace Hotel
09.00 – 09.15 Opening by MC & Prayers (Reciting
Qur’an, Pray)
Ghufran Zakira
Committee
Prof. Dr. Abrar Muslim,
M.Eng
Prof. Dr. Samsul Rizal
Committee
Committee
Moderator:
Dr. Ir. Yunardi, MA.Sc
09.15 – 09.20 Singing the National Anthem of Indonesia
(Indonesia Raya) 09.20 – 09.25 Welcoming Remark by the Conference
Chairman
09.25 – 09.35
Welcoming Remark by the Rector of
Universitas Syiah Kuala 09.35 – 09.45 Sign of ICChEAS MoU
09.45 – 09.55 Plaquette Handover
09.55 – 10.05 Photo Session
10.05 – 10.25 Break
Keynote Session
10.25 – 10.45 Keynote Speaker 1 : Prof. Dr. Ku Halim
Ku Hamid
10.45 - 11.05 Keynote Speaker 3: Dr. Ryosuke Takagi
11.05 – 11.25 Keynote Speaker 2: P r o f . D r .
M a i z i r w a n M e l
11.25 -12.00 Discussion
12.00 – 13.30
Lunch Break
13.30 – 14.45
14.45 – 15. 45
Invited Speaker and Parallel Session II
Parallel Session III
Section Chair
Section Chair
15.45 – 16.15 Break
16.15-17.15 Parallel Session IV Section Chair
17.15 – 18.00 Clossing Ceremony Committee
Moderator
20. 00- 21.00 Gala Dinner Committee
Day 2: T h u r s d a y , October 24, 2019
Writing Clinic for Selected Paper (Venue: Seminar room, Chemical Engineering Department, Syiah Kuala University)
12
The International Conference Chemical Engineering and Applied Sciences 2019
Parallel schedule
Parallel Session 1 : Polymer, membrane, composite, and nanotechnology
Time : 23rd, October 2019, Wednesday/08.00 – 09.00
Room : Medina 1
Session Chair : Prof. Dr. Ir. Sri Aprilia, MT
No Authors Titles of Paper
1 Muthia Elma Rapid Thermal Processing and Long Term Stability of Interlayer-
free Silica-P123 Membranes for Wetland Saline Water
Desalination
2 Fachrul Razi, Nur Aisyah, Syarifah
Rabiatul Adawiyah
The antifouling enhancement of composite polyethersulfone
membrane with the addition of Mg(OH)2 nanoparticles
3 Muhammad Iqhrammullah, Marlina
Marlina, Syahrun Nur
Adsorption Behaviour of Hazardous Dye (Methyl Orange) on
Cellulose-Acetate Polyurethane Sheets
4 Faisal Yusufi Guswara, Fauzi Ihsan,
Zuhra Mahyuddi, Sri Aprilia,
The Treatment Effect of Tensile Strength on Polypropylene
Filled With Silica From Rice Husk Ash
5 Yusnimar Yusnimar, J. N. Rahman,
P. Ningendah, Khairat Khairat, S. P.
Utami
Utilization of spent Bleaching Earth (SBE) as a Filler of Material
Construction
Parallel Session 2 : Polymer, membrane, composite, and naotechnology
Time : 23rd, October 2019, Wednesday/13.30 – 14.45
Room : Medina 1
Session Chair : Dr. Fachrul Razi, ST., MT
No Authors Titles of Paper
1 Muthia Elma, Aulia Rahma, Amalia
Enggar Pratiwi, Erdina Lulu Atika
Rampun
Coagulation As Pre-treatment Process to Enhance Silica-pectin
Membrane Performance for Wetland Saline Water Desalination
2 Suffiyana Akhbar, Istikamah
Subuki, Rahida Wati Sharudin, and
Muhammad Hussain Ismail
Effect of Hydroxyapatite Particle Distribution to the Pore
Morphology of Porous Polycaprolactone/Hydroxyapatite
(PCL/HA) Composite
3 A Fahrina, , S Aprilia, N Arahman Characterization of ultrafiltration membrane composed by
renewable material as new additive
4 R Arisandi, A Fathurrahman, F
Razi, N Arahman
Improving Characteristics and Performance of Polyether Sulfone
(PES) Membrane with Anorganic Additives
5 U. Fathanah1, I. Machdar1, M.
Riza1, N. A. Rahman1 , M. R.
Lubis1, F. Nurfajrina1, A. Yolanda1
The Effects of Magnesium Hydroxide (Mg(OH)2) on the
Characteristics and Performance of Polyethersulfone Membranes
(PES) for Water Treatment
13
The International Conference Chemical Engineering and Applied Sciences 2019
Parallel Session 3 : Polymer, membrane, composite, and naotechnology
Time : 23rd, October 2019, Wednesday/14.45 – 15.45
Room : Medina 1
Session Chair : Dr. Sri Mulyati, MT
No Authors Titles of Paper
1 S F A Karim , N A N Hamzah, R A
A Aziz and U K Ibrahim
The Effect of Plasticizers towards the Characteristics of
Methylcellulose Film Packaging
2 S Mawarni F Meirisa, S Muchtar, M
Y Wahab, S Mulyat,Suraiya, C M
Rosnelly, Sofyana, Y Syamsuddin,
N Arahman
Evaluation on the UV-Shielding Performance of Self-
polymerized Dopamine-blended Membrane
3 Dedek Syafrina1, Sri Aprilia1*,
Bastian Arifin1 and Nasrullah
Razali
Characterization of Nanocellulose Polyvinyl Alcohol Composite
Based on Palm Oil Solid Waste
4 A. Erwin, S. Salomo, P.
Adhy, N. Utari, W. Ayu, Y. Wita
and S. Nani
Magnetic iron oxide particles (Fe3O4) fabricated by ball milling
for improving the environmental quality
5 Bahruddin1, Arya W1, Yanny S1
and Alfian M2
Effects of cup lump natural rubber as an additive on the
characteristics of asphalt-rubber products
Parallel Session 5 : Chemical Engineering Fundamentals and Applied Chemistry
Time : 23rd, October 2019, Wednesday/16.15 – 17.15
Room : Medina 1
Session Chair : Dr. Ir. Darmadi, MT
No Authors Titles of Paper
1 Mohd Jumain Jalil, Aliff Farhan
MohdYamin, Veronique Gloria V
Siduru, Norhashimah Morad,
Abdul Hadi
High Yield Epoxidation of Oleic Acid-Based Palm Kernel
Oil by Simulation
2 A Fadli, P Widiyanti, D Noviana, A
Prabowo and H Ismawati
Preparation of Hydroxyapatite Scaffold using Luffa cylindrica
sponge as template
3 Sunu Herwi Pranolo, Margono,
Paryanto, Abdurachman
Muizuddin, Kresna Tufail
Ayyubbiru
Potassium enrichment of treated palm oil mill effluent in a
fixed-bed contactor
4 S P Utami, V Novriyani, E O Sari,
D M Sari and Bahruddin
Response surface methodology of tensile strength properties of
bioplastic base-sago starch/citric acid by using carboxymethyl
cellulose (CMC) and microcrystalline cellulose (MCC) as filler
and its influenced
5 Darmadi Darmadi, Mirna Rahmah
Lubis, Riski Saputra, Muhammad
Dian Alfarabi, Siti Sarah, Adi
Salamun
Characterization of Modified Polyurethane Foam Adsorbents for
Mercury Adsorption Applications
14
The International Conference Chemical Engineering and Applied Sciences 2019
Parallel Session 6 : Chemical Engineering Fundamentals and Applied Chemistry
Time : 23rd, October 2019, Wednesday/08.00 – 09.00
Room : Medina 2
Session Chair : Dr. M. Faisal, ST., M. Eng
No Authors Titles of Paper
1 Mahidin, Erdiwansyah, Husni Husin,
Hamdani, Hisbullah
Utilization of oil palm biomass as a renewable and
sustainable energy source in Aceh Province
2 R Ulfa, I Machdar, Y Yunardi, J
Jauharlina, W Rinaldi
Residence Time Distribution Study in Laboratory Scale
Struvite Crystallization Reactor with Online Conductivity
Measurement
3 Rusmi Alias, Ayub Md. Som, M. Hakim
Abdullah
Kinetic Analysis of Empty Fruit Bunches impregnated with
catalyst using Flynn-Wall-Ozawa method
4 K FRullifank, M E Roefinal, M
Kostanti, L Sartika and Evelyn
Pulp and paper industry: An overview on pulping
technologies, factors, and challenges
5 H Desvita, M Faisal, Mahidin and
Suhendrayatna
Edible coating from chitosan combined with liquid smoke
for beef preservation
Parallel Session 7 : Chemical Engineering Fundamentals and Applied Chemistry
Time : 23rd, October 2019, Wednesday/13.30 – 14.45
Room : Medina 2
Session Chair : Prof. Dr. Ir. Husni Husin, MT
No Authors Titles of Paper
1 Amun Amri (Invited Speaker)
Solar Selective Absorber Materials Synthesis
Through the Sol-gel Process
2 Jhon Armedi Pinem, Panca Setia Utama,
Rozzana Sri Irianty, Barata Aditya
Prawiranegara, Edy Saputra
Palm oil mill fly ash as a low-cost adsorbent for
Rhodamine-B removal from industrial wastewater
3 S. Silfia, S. Sofyan, F. Failisnur
The physical properties, color direction and color difference
of stamp ink from gambier (Uncaria gambir Roxb) with
complexing Al2(SO4)3 compound
4 A Awaluddin, E Amiruddin, R
Anggraini, N Indriyani and SS Siregar
Precursor effect on the Fe-doped cryptomelane (Fe-OMS-2)
prepared via one-step sol-gel route as heterogeneous Fenton
catalyst for degradation of methylene blue
5 Komalasari , Evelyn, I D R Situmeang
and D Heltina Cathodic protection on stuctures of carbon steel using
sacrifice anode methode for corrosion control
15
The International Conference Chemical Engineering and Applied Sciences 2019
Parallel Session 8 : Chemical Engineering Fundamentals and Applied Chemistry
Time : 23rd, October 2019, Wednesday/14.45 – 15.45
Room : Medina 2
Session Chair : Dr. Ir. Yanna Syamsuddin, MT
No Authors Titles of Paper
1 Tuty Emilia Agustina, Indah Median
Chandra, Muhammad Nopriyansyah,
Susila Arita, Fitri Hadiah, Tuti Indah
Sari, Tirto Prakoso, Eddy Heraldy
The extraction of oil from cooling pond wastewater as a
raw material for biodiesel
2 Abrar Muslim, Anwar Thaib, Cut
Meurah Rosnelly, Muhammad
Hidayatullah, Muammar Riyadh,
Abdurrahman Abdurrahman
Adsorption of Cu(II) Ions In Aqueous Solution onto
Cavendish Bananas Bunch-Based Activated Carbon: Kinetic
And Isotherm Studies
3 Astri Fadhilah Abdul Rahim, Norafiqah
Jamaluddin, Atikah Kadri, Siti
Shawalliah Idris, Norazah Abd Rahman
Microwave-Assisted Hydrodistillation of Aquilaria
Subintegra
4 Zuchra Helwani, Zulfansyah, Warman
Fatra, Al Qohyum Fernando, Ghazi
Mauer Idroes, Muslem, Rinaldi Idroes
Torrefaction of Empty Fruit Bunches: Evaluation of Fuel
Characteristics Using Response Surface Methodology
5 Eko Ariyanto, Robiah, Netty Herawati,
Yetty Hastiana
Effect of Activation Natural Zeolite For Recovery PO4 And
NH4 On Wastewater For Struvite Crystal Production
Parallel Session 9 : Chemical Engineering Fundamentals and Applied Chemistry
Time : 23rd, October 2019, Wednesday/16.15 – 17.15
Room : Medina 2
Session Chair : T. Mukhriza, ST., M. Sc
No Authors Titles of Paper
1 N N Munawarah, A Gani, Mahidin Utilization Palm Shell Bioelastomeric as Composite Foams
for the Removal Hg2+ in Liquid Waste
2
Ahmad Fadli, Prihartini
Widiyanti, Deni Noviana,
Agung Prabowo, Adi Mulyadi,
Deska Deska
Porous Hydroxyapatite Scaffold Produced using Musa
paradisiaca template and its Biocompatibility In Vitro
3 Sri Haryani Anwar, Anisa Ayu Riski
Mai Poena, Murna Muzaifa, Hafidh
Hasan
Canning of Traditional Acehnese Food Made by Dried
Little Tuna (Euthynnus affinis) Using Two Sterilization
Methods
4 Rohani Mohd Zin, Norazah Abd
Rahman, Jaida Jumadi
Foaming in gas treatment process
5 R Siti Zaharah, K H Ku Halim, M
Mohibah, A Rusmi, M Mustaffa, A
Habsah, I Juferi, and F Maulana
Surface Modification of Bio-char by Using Steam Activation
16
The International Conference Chemical Engineering and Applied Sciences 2019
Parallel Session 10 : Chemical Engineering Fundamentals and Applied Chemistry
Time : 23rd, October 2019, Wednesday/08.00-09.00
Room : Medina 3
Session Chair : Zuchra, ST., M. Sc
No Authors Titles of Paper
1 Rizki Amalia Herawati, M. Faisal,
Mahidin
Utilization Of Hydroxyapatite From Tuna Fish Bone Waste
As Adsorbentforcadmium From Aqueous Solutions
2 P. N Alam, C.M Rosnelly, J.A Karo
Karo, A Ilhamdi, R Soekarno
Utilization of Natural Extracts as Corrosion Inhibitors in the
Seawater Environment
3 N.R. Arifah, A. Muslim, D.S. Syahiddin,
W. Rinaldi, H. Meilina, A. Salamun
Reduction of Zn(II) ions in Acid Mine Drainage by
Adsorption Using Adsorbent Prepared from Bone Coal
4 M Jannah, Zulfikar , F Meirisa, S
Muchtar, A Ambarita, S Mulyati,
Suraiya, C M Rosnelly , Y Syamsuddin
Removal of Manganese metal (Mn) from water by using
a combination process of adsorption and membrane
ultrafiltration
5 Nikita Emalya, Edi Munawar, Wahyu
Rinaldi, Yunardi
Landfill Leachate Management in Indonesia: A Review
Parallel Session 11 : Chemical Engineering Fundamentals and Applied Chemistry
Time : 23rd, October 2019, Wednesday/13.30 – 14.45
Room : Medina 3
Session Chair : Prof. Dr. Abrar Muslim, ST., M. Eng
No Authors Titles of Paper
1 Ku Halim Bin Ku Hamid
(Invited Speaker)
Agar Wood Ecosystem For Health And Wellbeing
2 F Fitriani, H Husin, M Marwan,
F Nasution, Z Zuhra, T M Asnawi, and H
Hisbullah2
Waste peel of durian as solid catalysts for biodiesel
production
3 J Jefri, K H Ku Halim, M Mohibah, A
Rusmi, M Mustaffa, A Habsah, I
Kamariah Noor, and F Mulana
Thermal Cracking of Crude Palm Oil by using ZSM-5 Derived
from Pottery Waste of Sungai Sayong
4 N Sylvia, Yunardi, H Husin and A
Muslim
CO2 Emission Management in Palm Oil Industries in
Indonesia: A Review
5 Fahmi Arifan, Sri Winarni,
Wahyuningsih, Isti Pudjihastuti,
RTD Wisnu Broto
Functional Beverage Instant Ginger Powder
(Zingiberofficinale) with Addition of Betel Extraction (Piper
bettle)
17
The International Conference Chemical Engineering and Applied Sciences 2019
Parallel Session 12 : Chemical Engineering Fundamentals and Applied Chemistry
Time : 23rd, October 2019, Wednesday/14.45 – 15.45
Room : Medina 3
Session Chair : Prof. Dr. Nasrul AR, ST., MT
No Authors Titles of Paper
1 Didik Ariwibowo, Indartono, Seno
Darmanto
Refrigeration System Based-Dehumidifier
2 I Kusyairi, MA Choiron, HM Himawan,
YS Irawan
Differences in Precision of Wax Molds Made of Portland
Cement and Silicone Rubber in Investment Casting Process
for Economic Efficacy
3 Panca Setia Utama, Monita Olivia,
BarataAditya Prawiranegara, Imelda
Dewi Agusti, JhonArmedi Pinem, Edy
Saputra.
Peat water treatment by adsorption using kaolin-based
geopolymer
4
5 Sofyana, Y Syamsuddin, S Mulyati, F
Razi
Effects of Polyvinylpyrrolidone Additive on the
Characteristics and Performance of Polyethersulfone
MembraneforReducement of Fe in Water
Parallel Session 13 : Biotechnology/Biochemical Engineering/Environmental Engineering
Time : 23rd, October 2019, Wednesday/13.30 – 14.45
Room : Aceh 1
Session Chair : Prof. Dr. Muhammad Dani Supardan, MT
No Authors Titles of Paper
1 B. Budiyono, Iqbal Syaichurrozi
(Invited Speaker)
A Review: Biogas Production from Tofu Liquid Waste
2 Nor Roslina Rosli, Noor Fitrah Abu
Bakar and Mohamad Rafie Azhar
Ornamental Plant Anthurium Andreanum for the Treatment of
Nitrate and Copper from Water in a Constructed Wetland System
3 Zaulfikar, U Sudarno and Budiyono Landfill mining dominated by organic solid waste: a review on
its benefits, potential and challenges to recovery landfills in
growing cities in Indonesian
4 Heri Hermansyah and Shitta A D
Adisasmito
Bio-Succinic Acid Production using Immobilized Bacteria from
Goat Rumen by Semi-Simultaneous Saccharifiction and
Fermentation Configuration
5 Evelyn, S R Muria, K F Rullifank,
D Fozla and F K Khoirunnisa
Thermal inactivation of Talaromyces flavus ascospores in
pineapple juice as influenced by temperature, soluble solids, and
spore age
18
The International Conference Chemical Engineering and Applied Sciences 2019
Parallel Session 14 : Biotechnology/Biochemical Engineering/Environmental Engineering
Time : 23rd, October 2019, Wednesday/14.45 – 15.45
Room : Aceh 1
Session Chair : Ir. Teuku Asnawi, M. Eng
No Authors Titles of Paper
1 Winnie Ngui Shy Yi, Syazwan
Aizad Abdul Mutalib, Iliya Zakirah
Izhar & Saiful Irwan Zubairi
Evaluation of Human Foetal Lung Cell (IMR-90) Proliferation
Treated with Malaysia Channa striatus and Channa micropeltes
Water Extract
2 A Azizan
Where would our biodiesel stand in our technology?
3 Zulfaidah Ariany, Sarwoko,
Suharto, Budhi Santoso, Romadhoni
Main Engine Calculation for Ferry RoRo 500 DWT Ship Using
Electric Propulsion
4 D Valensya, I Rozalia, Zuhra and Y
Syamsuddin
Utilization of Avocado Seed Waste as Raw Material for
Producing Biodiesel with CaO Catalyst from Eggshell
5 Mahidin, Erdiwansyah, Husni
Husin, A.P Hayati, Hamdani,
Hisbullah
Utilization of oil palm biomass as a renewable and sustainable
energy source in Aceh Province
Parallel Session 15 : Biotechnology/Biochemical Engineering/Environmental Engineering
Time : 23rd, October 2019, Wednesday/16.15 – 17.15
Room : Aceh 1
Session Chair : Prof. Dr. Mahidin, ST., MT
No Authors Titles of Paper
1 R Darmawan, V Galih, M A
Rizaldi, S R Juliastuti, S Gunawan,
H W Aparamarta and A Wiguno
Production of Liquid Bio-Fertilizer from Old Coconut Water and
Molasses using Consortium Microbes
2 Syafrudin, WD Nugraha, Febrina
Margaretha, Hashfi Hawali Abdul
Matin, Budiyono
Optimization of Biogas Production From Water Hyacinth by
Liquid Anaerobic Digestion (L-AD) Using Response Surface
Technology
3 S D Said, T Maimun, T M Asnawi
and A Muslim
UV-C light treatment for inhibition of free fatty acids formation in
crude palm oil: effects of dosages and exposure time
4 Anggun Puspitarini Siswanto,
Mohamad Endy Yulianto, Dwi
Handayani
Morphology Characterization of Lignocellulosic Materials in
Ozone Based Degradation
5 M Rizal, Y Syamsyuddin and M D
Supardan
Esterification of free fatty acids in waste cooking oil through
hydrodynamic cavitation process
19
The International Conference Chemical Engineering and Applied Sciences 2019
Parallel Session 16 : Biotechnology/Biochemical Engineering/Environmental Engineering
Time : 23rd, October 2019, Wednesday/13.30 – 14.30
Room : Aceh 1
Session Chair : Dr. M. Roil Bilad, M. Sc
No Authors Titles of Paper
1 I Isbah, W Mangestiyono Analysis the Cause of Leakage and Repair of Floor Plates Diesel
Fuel Tank 20-D-2 at PT BADAK NGL Indonesia
2 Y. Yunardi, Hesti Meilina, Umi
Fathanah, Raseuki Mahadina, Adela
Rinaldi, J Jauharlina
Potential of Edible Oil Production from Rice Bran in Indonesia:
A Review
3 R Maula, Nurhaliza, Nurlaila,
Mukhlishien and Y Syamsuddin
The Utilization of Tanjung Fruit (Mimusops elengi L) to Produce
Anti Diabetes Flour
4 Retno Iswarin Pujaningsih, Istna
Mangisah
Physical Characteristic Management and Palatability of
Processed Mung Bean Sprout for Duck
5 Istna Mangisah, V.D.Y.B. Ismadi,
F.Wahyono, N. Suthama, Bambang
Sukamto, R.I.Pujaningsih
Utilization of Durian Seeds as a Substitute for Corn in The
Laying Hen Feed on Consumption and Nutrient Digestibility for
Improving Local Management
Parallel Session 17 : Catalysis and Catalytic Reaction Engineering, Process Control and Modelling
Time : 23rd, October 2019, Wednesday/14.30 – 15.45
Room : Aceh 2
Session Chair : Dr. Azwar, ST., M. Sc
No Authors Titles of Paper
1 Yunardi (Invited Speaker) Reliability Of Soot Models In Turbulent Non-Premixed
Combustion Simulation
2 T W Putra, R Hardiansyah, M R Lubis,
and M D Supardan
Intensification of biolubricant synthesis from used cooking oil
using tetrahydrofuran as co-solvent
3 Mutia Reza, Edi Munawar, Wahyu
Rinaldi, Novi Sylvia, Yazid Bindar, Asri
Gani, Yunardi
Computational Fluid Dynamics Modelling of Square
Cyclone with Double Inlets
4 D Y Tadeus, Yuniarto, F Mangkusasmito
LoRa Gateway as Internet Of Things (IoT) Infrastructure
Components on Undip Vocational School
5 Devi Yanti, Husni Husin, Firda Tirta
Yani, Arif Maulana, Adisalamun
Adisalamun, Husaini Husaini
Transesterification of Pangium Edule Reinw oil to biodiesel using durian
rind ash as heterogeneous catalysts
Parallel Session 18 : Catalysis and Catalytic Reaction Engineering, Process Control and Modelling
Time : 23rd, October 2019, Wednesday/16.15 – 17.15
Room : Aceh 2
Session Chair : Dr. Azwar, ST., M. Sc
No Authors Titles of Paper
1 V Paramita, H Kusumayanti, M E
Yulianto, D A Rachmawati, I Hartati, PR
R Ardi
Drying Kinetic Modeling of Dried Black Potato (Plectranthus
rotundifolius) Cultivated in Indonesia Archipelago
2 R Wahyudi, Seno Darmant Restriction Analysis of Water Pipe Age on 31-F-5 Boiler
using Metalography Method in PT Badak NGL Bontang
Indonesia
Chemical Engineering Dept.
Syiah Kuala University