cameron - type u bop.pdf

TC1001-04 15 2004 Cooper Cameron, Cameron Division

U BOP

The Cameron U BOP is the most widely used ram-type BOP for land, platform and subsea applications

worldwide and offers the widest range of sizes of any Cameron ram-type BOP. Like all other Cameron

preventers, the rams in the U BOP are pressure-energized. Well bore pressure acts on the rams to in-

crease the sealing force and maintain the seal in case of hydraulic pressure loss. Seal integrity is actu-

ally improved by increased well bore pressure.

Other features of the U BOP include:

Bonnet seal carrier is available to eliminate the need for high makeup torque on bonnet bolts

and nuts. The new 13-5/8 bodies have a bore seal. Therefore you can add the seal carrier

without additional re-work. All other sizes require modification to accept the seal carrier.

Manual or Hydraulic operating systems available.

Hydraulically operated locking mechanisms, wedgelocks, lock the ram hydraulically and hold

the rams mechanically closed even when actuating pressure is released. The operating system

can be interlocked using sequence caps to ensure that the wedgelock is retracted before

pressure is applied to open the BOP.

For subsea applications, a pressure balance chamber is used with the wedgelocks to eliminate

the possibility of the wedgelock becoming unlocked due to hydrostatic pressure.

Retrofit to UM Bonnet is available to provide more shearing force without the need for shear

bonnets, large bore bonnets, or tandem boosters.

Other features include hydraulically opening bonnets, forged body and a wide selection of rams to

meet all applications. See page 53 for rams available to fit the U BOP.

U Blowout Preventer

SD 034598

Wedgelock Assembly


U BOP Hydraulic Control System

The U blowout preventer is designed so that hydraulic pressure opens and closes the rams and provides the

means for quick ram change-out.

Ram closing pressure closes the rams. When the bonnet bolts are removed, closing pressure opens the bonnet.

After the bonnet has moved to the fully extended position, the ram is clear of the body. An eyebolt can be in-

stalled in the top of each ram to lift it out of the preventer.

Ram opening pressure opens the rams. Following ram change-out, this pressure closes the bonnets. The rams are

pulled outward, near the bonnets, before the bonnets begin moving toward the preventer body. This assures

that the rams never obstruct the bore or interfere with the pipe in the hole. Hydraulic pressure draws the bon-

nets tightly against the preventer body and the bonnet bolts are reinstalled to hold the bonnets closed.

U BOP Operating Data and Fluid Requirements Large Bore Shear Bonnet Operating Data and Fluid Requirements

Bore Size and

Working

Pressure

Gals to

Open

Pipe Rams

(1 Set)

Gals to

Close

Pipe

Rams

(1 Set)

Locking

Screw

Turns

(Each End)

Closing

Ratio

Opening

Ratio

Bore Size and

Working

Pressure

Gals to Open

Pipe Rams

(1 Set)

Gals to

Close

Pipe Rams

(1 Set)

Locking

Screw Turns

(Each End)

Closing

Ratio

Opening

Ratio

7-1/16 All WP 1.3 1.3 18 6.9:1 2.2:1 7-1/16 All WP - - - - -

11 Except 15,000psi

3.4 3.5 27 7.3:1 2.5:111 Except 15,000psi

6.8 7.0 27 12.0:1 4.8:1

11 15,000 psi 5.7 5.8 32 9.8:1 2.2:1 11 15,000 psi 8.9 9.0 32 15.2:1 3.7:1

13-5/8 Except15,000 psi

5.5 5.8 32 7.0:1 2.3:113-5/8 Except15,000 psi

10.5 10.9 32 10.8:1 4.5:1

13-5/8 15,000 psiModel B

10.4 10.6 45 10.6:1 3.6:113-5/8 15,000 psiModel B

16.0 16.2 45 16.2:1 6.0:1

16-3/4 3000 psiModel B

9.8 10.6 38 6.8:1 2.3:116-3/4 3000 psiModel B

18.2 19.0 38 10.4:1 4.4:1

16-3/4 5000 psiModel B

9.8 10.6 38 6.8:1 2.3:116-3/4 5000 psiModel B

18.2 19.0 38 10.4:1 4.4:1

16-3/4 10,000 psi 11.6 12.5 45 6.8:1 2.3:1 16-3/4 10,000 psi 18.2 19.1 45 10.4:1 4.4:1

18-3/4 10,000 psi 21.3 23.1 54 7.4:1 3.7:1 18-3/4 10,000 psi - - - - -

20-3/4 3000 psi 8.1 8.7 46 7.0:1 1.3:1 20-3/4 3000 ps 14.3 14.9 46 10.8:1 1.7:1

21-1/4 2000 psi 9.0 8.7 46 7.0:1 1.3:1 21-1/4 2000 psi 14.3 14.9 46 10.8:1 1.7:1

21-1/4 5000 psi 27.3 30.0 54 7.2:1 4.0:1 21-1/4 5000 psi - - - - -

21-1/4 10,000 psi 24.5 26.9 51 7.2:1 4.0:1 21-1/4 10,000 psi - - - - -

26-3/4 3000 psi 10.1 10.8 58 7.0:1 1.0:1 26-3/4 3000 ps - - - - -

U BOP Specifications

The following specifications apply to typical Cameron U type BOPs. Your Cameron repre-sentative can provide information on non-standard BOP assemblies.

Side outlets to 4-1/16 (7-1/16 on 26-3/4 BOPs) can be provided beneatheach set of rams on either or both sides of U BOPs. Side outlets can bestudded, open-face flange or clamp hub with the same pressure rating as thevertical run connections.

Flanges conform to API standard 6A and/or 16A. Hubs conform to API 16A orapplicable standards. Type 6BX flanges are standard for 10,000 and 15,000 psiworking pressures and for 5000 psi for 13-5/8 and larger bore BOPs.

Hydraulic control connections for operation of rams and bonnets are 1 NPT. There aretwo connections for each set of rams. Wedgelock connections are NPT.

The capital letters in the following designations refer to the U BOP dimensional viewsand dimensional charts shown on the following pages.

A-1 Length - bonnets closed, locking screws lockedA-2 Length - bonnets opened, locking screws unlockedA-3 Length - bonnets closed, with wedgelocksA-4 Length - bonnets opened, with wedgelocksB-1 Height - flangedB-2 Height - clamp hubsB*** Height - added height if 30 spacing is required for doubleC Width - no side outletsD Centerline of preventer to outlet flange or hub face. This distance is variable and

must be determined per individual specifications.E-1 Centerline of side outlet below rams to bottom flange faceE-2 Centerline of side outlet below rams to bottom hub faceF-1 Top of upper ram to top flange faceF-2 Top of upper ram to top hub faceG Height of ramH-1 Centerline of side outlet between rams to bottom flange faceH-2 Centerline of side outlet between rams to bottom hub faceJ Top of lower ram to bottom of upper ram


Note: All weights listed are based on utilizing closed die forgings.


U BOP Single Open Faced Flange or Clamp Hub Dimensions

Size(in.)

PressureRating(psi)

VerticalBore(in.)

A-1(in.)

A-2(in.)

A-3(in.)

A-4(in.)

B-1(in.)

B-2(in.)

C(in.)

E-1(in.)

E-2(in.)

F-1(in.)

F-2(in.)

G(in.)

Approx.Weight

(lb)

7-1/16* 3000 7-1/16 74.00 109.50 - - 24.06 - 20.25 8.75 - 7.84 - 5.50 26007-1/16* 5000 7-1/16 74.00 109.50 - - 27.50 25.19 20.25 10.41 9.25 9.63 8.47 5.50 28007-1/16 10,000 7-1/16 74.00 109.50 - - 30.56 27.19 20.63 11.06 9.38 12.03 10.34 5.50 35507-1/16 15,000 7-1/16 74.00 109.50 - - 31.81 - 20.63 11.69 - 12.66 - 5.50 380011* 3000 11 96.25 146.88 - - 29.06 - 25.13 9.81 - 10.53 - 6.75 530011* 5000 11 96.25 146.88 110.13 150.19 34.31 29.31 25.13 12.44 9.94 13.16 10.66 6.75 560011* 10,000 11 96.25 146.88 110.13 150.19 35.69 32.19 25.75 13.13 11.38 13.84 12.09 6.75 640011 Model 79 15,000 11 124.00 175.31 124.50 167.13 44.81 33.88 32.00 16.69 11.22 17.78 12.31 9.25 10,30013-5/8 3000 13-5/8 112.13 171.50 122.69 166.06 31.31 - 29.25 10.31 - 11.53 - 7.50 720013-5/8 5000 13-5/8 112.13 171.50 122.69 166.06 33.81 31.94 29.25 11.56 10.63 12.78 11.84 7.50 770013-5/8 10,000 13-5/8 114.13 172.75 124.69 167.31 41.69 32.81 30.25 15.13 10.69 17.09 12.66 7.50 10,30013-5/8 Model B* 15,000 13-5/8 139.00 214.38 152.25 205.50 53.69 42.00 39.50 21.38 15.50 22.84 17.00 8.00 23,70016-3/4 Model B 3000 16-3/4 127.25 204.56 147.25 199.38 40.06 31.75 35.75 13.31 9.16 15.41 11.25 9.25 13,70016-3/4 Model B 5000 16-3/4 129.25 202.13 149.25 202.25 43.06 34.94 35.75 14.81 10.75 16.91 12.84 9.25 13,75016-3/4* 10,000 16-3/4 139.00 218.38 155.50 212.00 49.69 41.94 39.50 19.38 15.50 20.22 16.34 9.25 23,30018-3/4 10,000 18-3/4 156.38 242.13 166.50 226.63 56.00 43.23 42.50 20.50 13.88 22.00 15.34 12.00 28,90020-3/4 3000 20-3/4 143.69 226.81 163.94 223.88 40.56 33.31 39.52 14.31 10.69 16.28 12.66 8.00 13,65021-1/4 2000 21-1/4 143.69 226.81 163.94 223.88 37.9 33.31 39.52 12.63 10.69 14.59 12.66 8.00 13,25021-1/4 5000 21-1/4 164.25 247.25 180.94 239.25 50.94 46.13 42.50 17.97 17.19 18.72 14.69 13.50 30,00021-1/4* 10,000 21-1/4 163.38 250.38 181.13 239.50 66.00 53.00 47.25 24.53 18.03 26.25 19.75 13.50 34,65026-3/4 3000 26-3/4 169.63 275.38 - - 48.31 - 46.25 17.44 - 19.91 - 8.00 24,000

A

C

D

B G

F

E

Top View Single or Double U BOP

Side View Single U BOP SD 034601

* Available with stud X flange connection

Weights shown are for flange X flange top/bottom



U BOP Double Open Faced Flange or Clamp Hub Dimensions

Size(in.)

Press.Rating(psi)

Vert.Bore(in.)

A-1(in.)

A-2(in.)

A-3(in.)

A-4(in.)

B-1(in.)

B-2(in.)

B***(in.)

C(in.)

E-1(in.)

E-2(in.)

F-1(in.)

F-2(in.)

G(in.)

H-1(in.)

H-2(in.)

J(in.)

Approx.Weight

(lb)

7-1/16* 3000 7-1/16 74.00 109.50 - - 41.00 - 18.56 20.25 8.75 - 7.84 - 5.50 25.69 - 11.44 50007-1/16* 5000 7-1/16 74.00 109.50 - - 44.19 41.88 18.81 20.25 10.41 9.25 9.63 8.47 5.50 27.09 25.94 11.19 52007-1/16 10,000 7-1/16 74.00 109.50 - - 48.63 45.25 17.44 20.63 11.06 9.38 12.03 10.34 5.50 29.13 27.44 12.56 64007-1/16 15,000 7-1/16 74.00 109.50 - - 49.88 - 17.44 20.63 11.69 - 12.66 - 5.50 29.75 - 12.56 675011* 3000 11 96.25 146.88 - - 49.25 - 16.56 25.13 9.81 - 10.53 - 6.75 30.00 - 13.44 990011* 5000 11 96.25 146.88 110.13 150.19 54.50 49.50 16.56 25.13 12.44 9.94 13.16 10.66 6.75 32.63 30.13 13.44 10,20011* 10,000 11 96.25 146.88 110.13 150.19 55.88 52.38 16.56 25.75 13.13 11.38 13.84 12.09 6.75 33.31 31.56 13.44 11,30011"Model79

15,000 11 124.00 175.31 124.50 167.13 69.75 58.81 14.31 32.00 16.69 11.22 17.78 12.31 9.25 41.63 36.16 15.69 18,400

13-5/8 3000 13-5/8 112.13 171.50 122.69 166.06 53.38 - 15.44 29.25 10.31 - 11.53 - 7.50 32.38 - 14.56 14,30013-5/8 5000 13-5/8 112.13 171.50 122.69 166.06 55.88 54.00 15.44 29.25 11.56 10.63 12.78 11.84 7.50 33.63 32.69 14.56 14,80013-5/8 10,000 13-5/8 114.13 172.75 124.69 167.31 66.63 57.75 12.56 30.25 15.13 10.69 17.09 12.66 7.50 40.06 35.63 17.44 18,40013-5/8Mod B* 15,000 13-5/8 139.00 214.38 152.25 205.50 81.75 70.13 9.94 39.50 21.38 15.50 22.84 17.00 8.00 49.44 43.56 20.06 43,250

16-3/4Mod B 3000 16-3/4 127.25 204.56 147.25 199.38 65.88 57.56 13.44 35.75 13.31 9.16 15.41 11.25 9.25 39.13 34.97 16.56 26,650

16-3/4Mod B 5000 16-3/4 129.25 202.13 149.25 202.25 68.88 60.75 13.44 35.75 14.81 10.75 16.91 12.84 9.25 40.63 36.56 16.56 26,940

16-3/4* 10,000 16-3/4 139.00 218.38 155.50 212.00 77.75 70.00 11.19 39.50 19.38 15.50 20.22 16.34 9.25 47.44 43.56 18.81 43,50018-3/4 10,000 18-3/4 156.38 242.13 166.50 226.63 87.13 74.00 10.88 42.50 20.50 13.88 22.00 15.34 12.00 51.50 44.88 19.13 56,95020-3/4 3000 20-3/4 143.69 226.812 163.94 223.88 66.13 58.88 12.44 39.52 14.31 10.69 16.28 12.66 8.00 39.88 36.25 17.56 25,55021-1/4 2000 21-1/4 143.69 226.81 163.94 223.88 62.75 58.88 12.44 39.52 12.63 10.69 14.59 12.66 8.00 38.19 36.25 17.56 25,15021-1/4 5000 21-1/4 164.25 247.25 180.94 239.25 82.38 74.00 12.38 42.50 17.97 17.19 18.72 14.69 13.50 49.03 45.00 17.63 58,00021-1/4* 10,000 21-1/4 163.38 250.38 181.13 239.50 100.06 87.06 9.44 47.25 24.53 18.03 26.25 19.75 13.50 58.59 52.09 20.56 65,50026-3/4 3000 26-3/4 169.63 275.38 - - 78.88 - 7.44 46.25 17.44 - 19.91 - 8.00 48.00 - 22.56 44,200

C

A

F

G

G

JB

E

H

D

Top View - Single or Double U BOP

Side View - Double U BOP SD 034600

* Available with stud X flange connection

Weights shown are for flange X flange top/bottom


7-1/16 3000 - 7-1/16 15,000 psi WP U BOP Part Numbers

ItemNo.

DescriptionQtySgl

QtyDbl

7-1/163000psi

Model II

7-1/165000psi

Model II

7-1/1610,000

psiModel II

7-1/1615,000

psiModel II

1 Body 1 1 - - - -2 Intermediate Flange 2 4 030266-03-00-01 030266-03-00-01 030266-01-01 030266-01-01

2A Intermediate Flange/Shear - - 041499-03 041499-03 041499-01 041499-013 Bonnet 2 4 030278-04 030278-03 030278-02 030278-014 Ram Assembly 2 4 644504-( ) 644504-( ) 644504-( ) 644504-( )5 Piston, Operating 2 4 236501-15-11-08 236501-15-11-08 236501-15-11-08 236501-15-11-08

5A Piston, Operating/Shear - - 049116-01 049116-01 049116-01 049116-016 Cylinder, Operating 2 4 030274-02 030274-02 030274-02 030274-02

6A Cylinder, Operating/Shear - - 041365-02 041365-02 041365-02 041365-027 Housing, Locking Screw 2 4 030308-01 030308-01 030308-01 030308-018 Locking Screw 2 4 030326 030326 030326 030326

8A Locking Screw/Shear - - 049258-01 049258-01 049258-01 049258-019 Piston, Ram Change/Open 2 4 030324 030324 030324 03032410 Piston, Ram Change/Close 2 4 030325 030325 030325 03032511 Cylinder, Ram Change 4 8 030273-02 030273-02 030273-02 030273-0212 Bolt, Bonnet 8 16 030312-06 030312-02 030312-07 030312-01

12A Bolt, Bonnet/Shear - - 041366-06 041366-02 041366-07 041366-2213 Stud, Locking Screw Housing 16 32 219065-10-04-41 219065-10-04-41 219065-10-04-41 219065-10-04-41

13A Stud, Locking Screw Housing/Shear - - 038732-57-00-54 038732-57-00-54 219065-10-05-41 219065-10-05-4114 Nut, Locking Screw Housing 16 32 2709000-10-01 2709000-10-01 2709000-10-01 2709000-10-0115 Check Valve, Plastic Packing 2 4 M517988 M517988 M517988 M51798816 Screw, Plastic Packing 2 4 005940-09 005940-09 005940-09 005940-0917 Pipe Plug, Plastic Packing 2 4 005930-05-10 005930-05-10 005930-05-10 005930-05-1018 Ring, Plastic Packing 2 4 2010178-01 2010178-01 2010178-01 2010178-0119 Ring, Plastic Energizing 2 4 018586-12 018586-12 018586-12 018586-1220 Seal Ring, Connecting Rod 2 4 212741-37-00-01 212741-37-00-01 212741-37-00-01 212741-37-00-0121 Ring Back-Up 4 8 - - 021792-21 021792-2122 Seal, Bonnet 2 4 644197-01-00-01 644197-01-00-01 644197-01-00-01 644197-01-00-0123 Pin, Ram Guide 4 8 030313-02 030313-02 030313-02 030313-0224 O-Ring, Operating Cylinder 4 8 702645-44-61 702645-44-61 702645-44-61 702645-44-6125 O-Ring, Operating Piston Rod to Int Flg 2 4 018492-92 018492-92 018492-92 018492-9226 Lip Seal, Operating Piston 2 4 710541 710541 710541 71054127 Seal Ring, Tail Rod 2 4 212741-32 212741-32 212741-32 212741-3228 O-Ring, Wiping 2 4 702645-33-11 702645-33-11 702645-33-11 702645-33-1129 O-Ring, Ram Change Piston to Body 4 8 702645-32-41 702645-32-41 702645-32-41 702645-32-4130 O-Ring, Ram Change Piston Rod to Int Flg 4 8 702645-32-91 702645-32-91 702645-32-91 702645-32-9131 O-Ring, Ram Change Cylinder to Int Flg 4 8 702645-33-81 702645-33-81 702645-33-81 702645-33-8132 O-Ring, Ram Change Cylinder to Bonnet 4 8 702645-34-21 702645-34-21 702645-34-21 702645-34-2133 O-Ring, Ram Change Piston 4 8 702645-33-21 702645-33-21 702645-33-21 702645-33-2134 O-Ring, Bonnet Bolt Retainer 8 16 702645-22-31 702645-22-31 702645-22-91 702645-23-2135 Cap Screw, Int Flange to Bonnet 16 32 702585-22-00-50 702585-22-00-50 702585-22-00-50 702585-22-00-5036 Gland, Bleeder 2 4 017454-08 017454-08 017454-08 017454-0837 Plug, Bleeder 2 4 017454-09 017454-09 017454-09 017454-0938 Lifting Eye 2 2 011849-01 011849-01 011849-01 011849-0139 Packing, Plastic 10 20 007650-25 007650-25 007650-25 007650-2540 Washer 2 4 689523-04 689523-04 689523-04 689523-0441 Ring, Retainer 2 4 018572-83 018572-83 018572-83 018572-8342 Wear Ring, Operating Piston 2 4 049223-03 049223-03 049223-03 049223-0343 Spacer, Shear - - 687117-01 687117-01 687117-01 687117-01

*


If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.

11 3000 - 11 15,000 psi WP U BOP Part Numbers

ItemNo.

DescriptionQtySgl

QtyDbl

*113000psi

Model II

* 115000psi

Model II

*1110,000

psiModel II

*1115,000

psiModel 79

1 Body 1 1 - - - -2 Intermediate Flange 2 4 030267-03 030267-03 030267-03 049391-01

2A Intermediate Flange/Shear - - 041457-03** 041457-03** 041457-03**3 Bonnet 2 4 030268-01 030268-02 030268-03 0312414 Ram Assembly 2 4 644219-( ) 644219-( ) 644219-( ) 644222-( )5 Piston, Operating 2 4 163192-01 163192-01 163192-01 698481

5A Piston, Operating/Shear - - 698914** 698914** 698914** *6 Cylinder, Operating 2 4 030274-03 030274-03 030274-03 030274-01

6A Cylinder, Operating/Shear - - 041365-03** 041365-03** 041365-03** -7 Housing, Locking Screw 2 4 030308-02 030308-02 030308-02 030308-038 Locking Screw 2 4 030365 030365 030365 030846

8A Locking Screw/Shear - - 046628-01 046628-01 046628-01 -9 Piston, Ram Change/Open 2 4 030362 030362 030362 03123910 Piston, Ram Change/Close 2 4 030363 030363 030363 03123811 Cylinder, Ram Change 4 8 030273-03 030273-03 030273-03 030273-0112 Bolt, Bonnet 8 16 030312-04 030312-03 030312-05 030312-12

12A Bolt, Bonnet/Shear - - 041366-04 041366-03 041366-05 -13 Stud, Locking Screw Housing 16 32 219065-12-05-01 219065-12-05-01 219065-12-05-01 219065-14-07-51

13A Stud, Locking Screw Housing/Shear - - 219065-12-06-51 219065-12-06-51 219065-12-06-51 -14 Nut, Locking Screw Housing 16 32 2709000-12-01 2709000-12-01 2709000-12-01 2709000-14-0115 Check Valve, Plastic Packing 2 4 M517988 M517988 M517988 M51798816 Screw, Plastic Packing 2 4 005940-09 005940-09 005940-09 005940-0917 Pipe Plug, Plastic Packing 2 4 005930-05-10 005930-05-10 005930-05-10 005930-05-1018 Ring, Plastic Packing 2 4 2010178-02 2010178-02 2010178-02 012469-2419 Ring, Plastic Energizing 2 4 018586-13 018586-13 018586-13 018586-1320 Seal Ring, Connecting Rod 2 4 212741-38-00-01 212741-38-00-01 212741-38-00-01 212741-38-00-0121 Ring Back-Up 4+ 8+ 021792-22 021792-22 021792-22 021792-2622 Seal, Bonnet 2 4 644197-02-00-01 644197-02-00-01 644197-02-00-01 049272-0323 Pin, Ram Guide 4 8 030313-03 030313-03 030313-03 030313-0124 O-Ring, Operating Cylinder 4 8 702645-45-11 702645-45-11 702645-45-11 702645-45-5125 O-Ring, Operating Piston Rod to Int Flg 2 4 018492-91 018492-91 018492-91 018492-9026 Lip Seal, Operating Piston 2 4 710539 710539 710539 71053827 Seal Ring, Tail Rod 2 4 212741-33-00-01 212741-33-00-01 212741-33-00-01 212741-34-00-0128 O-Ring, Wiping 2 4 702645-33-51 702645-33-51 702645-33-51 702645-33-7129 O-Ring, Ram Change Piston to Body 4 8 702645-32-61 702645-32-61 702645-32-61 702645-32-8130 O-Ring, Ram Change Piston Rod to Int Flg 4 8 702645-33-11 702645-33-11 702645-33-11 702645-33-3131 O-Ring, Ram Change Cylinder to Int Flg 4 8 031423-25-13-85 031423-25-13-85 031423-25-13-85 702645-34-6132 O-Ring, Ram Change Cylinder to Bonnet 4 8 2010180-02 2010180-02 2010180-02 702645-42-5133 O-Ring, Ram Change Piston 4 8 702645-33-51 702645-33-51 702645-33-51 702645-33-8134 O-Ring, Bonnet Bolt Retainer 8 16 702645-22-71 702645-22-91 702645-23-41 702645-23-9135 Cap Screw, Int Flange to Bonnet 16 32 702585-25-00-50 702585-25-00-50 702585-25-00-50 702585-25-00-5436 Gland, Bleeder 2 4 017454-08 017454-08 017454-08 017454-0837 Plug, Bleeder 2 4 017454-09 017454-09 017454-09 017454-0938 Lifting Eye 2 2 011849-01 011849-01 011849-01 011849-0139 Packing, Plastic 10 20 007650-25 007650-25 007650-25 007650-2540 Washer 2 4 689523-05 689523-05 689523-05 689523-0141 Ring, Retainer 2 4 018572-84 018572-84 018572-84 018572-8542 Wear Ring, Operating Piston 2 4 049223-02 049223-02 049223-02 049223-0143 Spacer, Shear**** - - 687117-02 687117-02 687117-02 687117-03

*A large bore shear bonnet is available for these sizes. For part numbers, see page 29.**Part numbers shown are for old style shear bonnets. For current model large bore shear bonnet part numbers, see page .***Required on all 11" 15,000 psi and 16-3/4" 10,000 psi BOP's with manual locking screws.+11" 15,000 psi requires 8 for single and 16 for double.*



13-5/8" 3000 - 13-5/8 15,000 psi WP U BOP Part Numbers

ItemNo.

DescriptionQtySgl

QtyDbl

*13-5/83000psi

Model II

*13-5/85000psi

Model II

*13-5/810,000

psiModel II

*13-5/815,000

psiModel B

1 Body 1 1 - - - -2 Intermediate Flange 2 4 030270-01-00-02 030270-01-00-02 031216 698899

2A Intermediate Flange/Shear - - 686242** 686242** 686767** 615538-013 Bonnet 2 4 030284-02 030284-01 031241 6918494 Ram Assembly 2 4 644225-( ) 644225-( ) 644225-( ) 644228-( )5 Piston, Operating 2 4 236501-33-11-08 236501-33-11-08 236501-34-11-03 698996

5A Piston, Operating/Shear - - 687542** 687542** 690791 615539-016 Cylinder, Operating 2 4 030274-01 030274-01 030274-01 030274-06

6A Cylinder, Operating/Shear - - 041365-01** 041365-01** 041365-01** -7 Housing, Locking Screw 2 4 030308-03 030308-03 030308-03 030308-068 Locking Screw 2 4 030307 030307 030307 695234

8A Locking Screw/Shear - - 030846 030846 030846 -9 Piston, Ram Change/Open 2 4 030310 030310 031239 038847-0110 Piston, Ram Change/Close 2 4 030309 030309 031238 038848-0111 Cylinder, Ram Change 4 8 030273-01 030273-01 030273-01 030273-0612 Bolt, Bonnet 8 16 030312-09 030312-01 2010181-06-01 030312-25

12A Bolt, Bonnet/Shear - - 041366-09 041366-01 041366-12 -13 Stud, Locking Screw Housing 16 32 005918-76-10 005918-76-10 005918-76-10 219065-14-07-51

13A Stud, Locking Screw Housing/Shear - - 219065-14-07-51 219065-14-07-51 219065-14-07-51 -14 Nut, Locking Screw Housing 16 32 2709000-14-01 2709000-14-01 2709000-14-01 2709000-14-0115 Check Valve, Plastic Packing 2 4 M517988 M517988 M517988 M51798816 Screw, Plastic Packing 2 4 005940-09 005940-09 005940-09 005940-0917 Pipe Plug, Plastic Packing 2 4 005930-05-10 005930-05-10 005930-05-10 005930-05-1018 Ring, Plastic Packing 2 4 012469-24 012469-24 012469-24 012469-2419 Ring, Plastic Energizing 2 4 018586-01 018586-01 018586-01 018586-0120 Seal Ring, Connecting Rod 2 4 212741-36-00-01 212741-36-00-01 212741-36-00-01 212741-36-00-0121 Ring Back-Up 4 8 - - 021792-26 021792-2622 Seal, Bonnet 2 4 644197-03-00-01 644197-03-00-01 644197-03-00-01 644196-01-00-0123 Pin, Ram Guide 4 8 030313-01 030313-01 030313-01 030313-0824 O-Ring, Operating Cylinder 4 8 702645-45-51 702645-45-51 702645-45-51 702645-46-1125 O-Ring, Operating Piston Rod to Int Flg 2 4 018492-90 018492-90 018492-90 018492-9026 Lip Seal, Operating Piston 2 4 710538 710538 710538 71054227 Seal Ring, Tail Rod 2 4 212741-34-00-01 212741-34-00-01 212741-34-00-01 212741-4528 O-Ring, Wiping 2 4 702645-33-71 702645-33-71 702645-33-71 702645-34-2129 O-Ring, Ram Change Piston to Body 4 8 702645-32-81 702645-32-81 702645-32-81 702645-33-2130 O-Ring, Ram Change Piston Rod to Int Flg 4 8 702645-33-31 702645-33-31 702645-33-31 031423-21-13-8531 O-Ring, Ram Change Cylinder to Int Flg 4 8 702645-34-61 702645-34-61 702645-34-61 702645-35-4132 O-Ring, Ram Change Cylinder to Bonnet 4 8 702645-42-51 702645-42-51 702645-42-51 702645-43-4133 O-Ring, Ram Change Piston 4 8 702645-33-81 702645-33-81 702645-33-81 702645-34-4134 O-Ring, Bonnet Bolt Retainer 8 16 702645-23-11 702645-23-21 702645-23-91 702645-24-5135 Cap Screw, Int Flange to Bonnet 16*** 32*** 702585-25-00-44 702585-25-00-44 702585-25-00-54 702585-31-00-5436 Gland, Bleeder 2 4 017454-08 017454-08 017454-08 017454-0837 Plug, Bleeder 2 4 017454-09 017454-09 017454-09 017454-0938 Lifting Eye 2 2 011849-01 011849-01 011849-01 011849-0139 Packing, Plastic 10 20 007650-25 007650-25 007650-25 007650-2540 Washer 2 4 689523-01 689523-01 689523-01 689523-0141 Ring, Retainer 2 4 018572-85 018572-85 018572-85 018572-8542 Wear Ring, Operating Piston 2 4 049223-01 049223-01 049223-01 049223-0443 Spacer, Shear - - 687117-03 687117-03 687117-03 687117-05

****A large bore shear bonnet is available for these sizes. For part numbers, see page 29.****Part numbers shown are for old style shear bonnets. For current model large bore shear bonnet part numbers, see page .****13-5/8 through 16-3/4 and 20-3/4 through 26-3/4 require 24 for single and 48 for double. The 18-3/4 requires 32 for single and 64 double.



16-3/4 3000 - 18-3/4 10,000 psi WP U BOP Part Numbers

ItemNo.

DescriptionQtySgl

QtyDbl

* 16-3/43000psi

Model B

*16-3/45000psi

Model B

*16-3/410,000

psiModel II

18-3/410,000

psiModel II

1 Body 1 1 - - - -2 Intermediate Flange 2 4 038944 038844 691848 041458

2A Intermediate Flange/Shear - - - 041408 -3 Bonnet 2 4 038843-02 038843-01 691849 0414594 Ram Assembly 2 4 644231-( ) 644231-( ) 644231-( ) 644234-( )5 Piston, Operating 2 4 614374-01 689562 692828 236501-54-11-03

5A Piston, Operating/Shear - - - 694085** 615536-01 -6 Cylinder, Operating 2 4 030274-06 030274-06 041365-06 030274-13

6A Cylinder, Operating/Shear - - - 041365-06** - -7 Housing, Locking Screw 2 4 030308-06 030308-06 030308-06 030308-098 Locking Screw 2 4 038901 038901 695234 041085

8A Locking Screw/Shear - - - 695234 - -9 Piston, Ram Change/Open 2 4 038946 038847-01 692756 04096110 Piston, Ram Change/Close 2 4 038947 038848-01 692759 04096011 Cylinder, Ram Change 4 8 030273-07 030273-06 030273-13 030273-0912 Bolt, Bonnet 8 16 030312-17 030312-16 030312-24 030312-23

12A Bolt, Bonnet/Shear - - - 041366-16 - -13 Stud, Locking Screw Housing 16 32 005918-78-10 219065-14-04-71 219065-14-06-01 005919-38-10

13A Stud, Locking Screw Housing/Shear - - - 005918-34-10 - -14 Nut, Locking Screw Housing 16 32 2709000-14-01 2709000-14-01 2709000-14-01 2709000-18-0115 Check Valve, Plastic Packing 2 4 M517988 M517988 M517988 M51798816 Screw, Plastic Packing 2 4 005940-09 005940-09 005940-09 005940-0917 Pipe Plug, Plastic Packing 2 4 005930-05-10 005930-05-10 005930-05-10 005930-05-1018 Ring, Plastic Packing 2 4 012469-52 012469-52 012469-52 012469-7219 Ring, Plastic Energizing 2 4 018586-14 018586-14 018586-14 018586-1920 Seal Ring, Connecting Rod 2 4 212741-44-00-01 212741-44-00-01 212741-44-00-01 212741-6021 Ring Back-Up 4 8 - - 021792-34 021793-40 22 Seal, Bonnet 2 4 644197-04-00-01 644197-04-00-01 644197-04-00-01 644197-05-00-0123 Pin, Ram Guide 4 8 030313-06 030313-06 030313-06 030313-0724 O-Ring, Operating Cylinder 4 8 702645-46-11 702645-46-11 702645-46-11 702645-46-9125 O-Ring, Operating Piston Rod to Int Flg 2 4 2708811-01 2708811-01 2708811-01 041602-04-13-8526 Lip Seal, Operating Piston 2 4 710542 710542 710542 71054327 Seal Ring, Tail Rod 2 4 212741-45 212741-45 212741-45 212741-36-00-0128 O-Ring, Wiping 2 4 702645-34-21 702645-34-21 702645-34-21 702645-34-5129 O-Ring, Ram Change Piston to Body 4 8 702645-33-21 702645-33-21 702645-33-21 702645-34-01

30 O-Ring, Ram Change Piston Rod to IntFlg 4 8 031423-21-13-85 031423-21-13-85 031423-21-13-85 2010180-02

31 O-Ring, Ram Change Cylinder to Int Flg 4 8 702645-35-41 702645-35-41 702645-35-41 702645-43-5132 O-Ring, Ram Change Cylinder to Bonnet 4 8 702645-43-41 702645-43-41 702645-43-41 702645-43-8133 O-Ring, Ram Change Piston 4 8 702645-34-41 702645-34-41 702645-34-41 030101-83-13-8534 O-Ring, Bonnet Bolt Retainer 8 16 702645-23-21 702645-23-71 702645-24-51 702645-24-7135 Cap Screw, Int Flange to Bonnet 16*** 32*** 702585-31-00-44 702585-31-00-54 702585-31-00-72 702585-36-00-7636 Gland, Bleeder 2 4 017454-08 017454-08 017454-08 017454-0837 Plug, Bleeder 2 4 017454-09 017454-09 017454-09 017454-0938 Lifting Eye 2 2 011849-01 011849-01 011849-01 011849-0139 Packing, Plastic 10 20 007650-25 007650-25 007650-25 007650-2540 Washer 2 4 689523-02 689523-02 689523-02 689523-0341 Ring, Retainer 2 4 033186-85 033186-85 033186-35 033186-01-0442 Wear Ring, Operating Piston 2 4 049223-04 049223-04 049223-04 049223-0743 Spacer, Shear - - - 687117-05 687117-05 -

****A large bore shear bonnet is available for these sizes. For part numbers, see page 29.****13-5/8 through 16-3/4 and 20-3/4 through 26-3/4 require 24 for single and 48 for double. The 18-3/4 requires 32 for single and 64 double.****Required on all 11" 15,000 psi and 16-3/4" 10,000 psi BOP's with manual locking screws.




20-3/4 3000 - 26-3/4 3000 psi WP U BOP Part Numbers

ItemNo. Description

QtySgl

QtyDbl

*20-3/43000psi

Model II

* 21-1/42000psi

Model II

21-1/45000psi

Model II

21-1/410,000

psiModel II

26-3/43000psi

Model II1 Body 1 1 - - - - -2 Intermediate Flange 2 4 236499-71-11-03 030911-01 - 615369-01 -

2A Intermediate Flange/Shear - - 041496-01** 041496-01** 049955-01 615418-01 0383273 Bonnet 2 4 030835-01 030835-02 049963-01 041357 0383264 Ram Assembly 2 4 044256-( ) 044256-( ) 044262-( ) 044262-( ) 044260-( )5 Piston, Operating 2 4 236501-71-11-03 690058-03 049954-01 041356 614376-01

5A Piston, Operating/Shear - - 693405** 693405** - 041374** -6 Cylinder, Operating 2 4 030274-04 030274-04 030274-11 030274-11 030274-05

6A Cylinder, Operating/Shear - - 041365-04** 041365-04** - 041365-11** -7 Housing, Locking Screw 2 4 030308-04 030308-04 030308-08 030308-08 030308-058 Locking Screw 2 4 030846 030846 041085 041085 034233

8A Locking Screw/Shear - - 034233 034233 - - -9 Piston, Ram Change/Open 2 4 030848 030848 041064 041064 03817410 Piston, Ram Change/Close 2 4 030849 030849 041065 041065 03832411 Cylinder, Ram Change 4 8 030273-04 030273-04 030273-11 030273-11 030273-0512 Bolt, Bonnet 8 16 030312-10 030312-11 030312-26 030312-21 030312-13

12A Bolt, Bonnet/Shear - - 041366-10 041366-11 - 041366-21 -13 Stud, Locking Screw Housing 16 32 219065-14-06-01 219065-14-06-01 005919-38-10 005919-38-10 219065-14-06-01

13A Stud, Locking Screw Housing/Shear - - 219065-14-07-51 219065-14-07-51 - - -14 Nut, Locking Screw Housing 16 32 2709000-14-01 2709000-14-01 2709000-18-01 2709000-18-01 2709000-14-0115 Check Valve, Plastic Packing 2 4 M517988 M517988 M517988 M517988 M51798816 Screw, Plastic Packing 2 4 005940-09 005940-09 005940-09 005940-09 005940-0917 Pipe Plug, Plastic Packing 2 4 005930-05-10 005930-05-10 005930-05-10 005930-05-10 005930-05-1018 Ring, Plastic Packing 2 4 012469-24 012469-24 012469-70 012469-70 012469-2419 Ring, Plastic Energizing 2 4 018586-01 018586-01 018586-18 018586-18 018586-0120 Seal Ring, Connecting Rod 2 4 212741-36-00-01 212741-36-00-01 011741-58-00-01 011741-58-00-01 212741-36-00-0121 Ring Back-Up 4 8 - - 021793-39 021793-39 -22 Seal, Bonnet 2 4 046613-16-00-01 046613-16-00-01 644197-08-00-01 644197-08-00-01 644197-09-00-0123 Pin, Ram Guide 4 8 030313-04 030313-04 030313-07 030313-07 030313-0524 O-Ring, Operating Cylinder 4 8 702645-45-51 702645-45-51 702645-46-91 702645-46-91 702645-45-5125 O-Ring, Operating Piston Rod to Int Flg 2 4 018492-90 018492-90 030101-88-13-85 030101-88-13-85 018492-9026 Lip Seal, Operating Piston 2 4 710538 710538 710544 710544 71053827 Seal Ring, Tail Rod 2 4 212741-34-00-01 212741-34-00-01 212741-36-00-01 212741-36-00-01 212741-34-00-0128 O-Ring, Wiping 2 4 702645-33-71 702645-33-71 702645-34-51 702645-34-51 702645-33-7129 O-Ring, Ram Change Piston to Body 4 8 702645-33-61 702645-33-61 702645-34-31 702645-34-31 702645-34-41

30 O-Ring, Ram Change Piston Rod to IntFlg 4 8 702645-34-11 702645-34-11 702645-35-11 702645-35-11 702645-34-91

31 O-Ring, Ram Change Cylinder to Int Flg 4 8 702645-43-71 702645-43-71 702645-44-01 702645-44-01 702645-43-91

32 O-Ring, Ram Change Cylinder toBonnet 4 8 702645-43-91 702645-43-91 702645-44-21 702645-44-21 702645-44-11

33 O-Ring, Ram Change Piston 4 8 702645-42-51 702645-42-51 702645-43-11 702645-43-11 702645-42-9134 O-Ring, Bonnet Bolt Retainer 8 16 702645-22-91 702645-22-71 702645-24-71 702645-24-81 702645-23-9135 Cap Screw, Int Flange to Bonnet 16*** 32*** 702585-28-00-50 702585-28-00-50 702585-36-00-93 702585-36-00-93 702585-31-00-7036 Gland, Bleeder 2 4 017454-08 017454-08 017454-08 017454-08 017454-0837 Plug, Bleeder 2 4 017454-09 017454-09 017454-09 017454-09 017454-0938 Lifting Eye 2 2 011849-01 011849-01 011849-01 011849-01 011849-0139 Packing, Plastic 10 20 007650-25 007650-25 007650-25 007650-25 007650-2540 Washer 2 4 689523-01 689523-01 002353-46 002353-46 689523-0141 Ring, Retainer 2 4 018572-85 018572-85 033186-92 033186-92 018572-8542 Wear Ring, Operating Piston 2 4 049223-10 049223-10 049223-11 049223-08 049223-1043 Spacer, Shear - - 687117-03 687117-03 - - -

****A large bore shear bonnet is available for these sizes. For part numbers, see page 29.****Part numbers shown are for old style shear bonnets. For current model large bore shear bonnet part numbers, see page .****13-5/8 through 16-3/4 and 20-3/4 through 26-3/4 require 24 for single and 48 for double. The 18-3/4 requires 32 for single and 64 double.



U BOP Bonnet Softgoods Components

SD 017515

24

29

3031

3224

26

27

33

1821

2019

25

42

2834

Bonnet Rebuild Softgoods Kits

For popular size U BOPs, a bonnet rebuild softgoods kit is available to provide all parts re-quired to reseal the operating system.

Kit parts are shrink-film packed to prevent loss and assure long shelf life. The kits areless expensive than individual parts. All parts in each kit are identified with part numbersand parts list index numbers.


U BOP Bonnet Rebuild Softgoods Kit Components

Item Number* Description

18 Ring, Plastic Packing19 Ring, Plastic Energizing20 Seal Ring, Connecting Rod21 Ring, Backup24 O-Ring, Operating Cylinder25 O-Ring, Operating Piston Rod to Intermediate Flange26 Lip Seal, Operating Piston27 Seal Ring, Tail Rod28 O-Ring, Wiping29 O-Ring, Ram Change Piston to Body30 O-Ring, Ram Change Piston Rod to Intermediate Flange31 O-Ring, Ram Change Cylinder to Intermediate Flange32 O-Ring, Ram Change Piston to Bonnet33 O-Ring, Ram Change Piston34 O-Ring, Bonnet Bolt Retainer39 Packing, Plastic**42 Wear Ring, Operating Piston44 O-Ring (not shown)

Kit Part Numbers

BOP Size (in.) Pressure Rating/Bonnet Type Kit Part Number*7-1/16 3000, 5000, 10,000 and 15,000 psi All** 644909-01

11 3000, 5000, and 10,000 psi Pipe** 644909-02

11 15,000 psi All 644831-08

13-5/8 3000, 5000, and 10,000 psi Pipe** 644909-0313-5/8 15,000 psi All 644831-12

16-3/4" 3000 psi All 644831-13

16-3/4 5000 psi Pipe 644831-1416-3/4 10,000 psi All 644831-1518-3/4 10,000 psi All 644909-0420-3/4 3000 psi Pipe 644831-1721-1/4 2000 psi Pipe or Shear** 644831-1821-1/4 5000 psi All 644831-1921-1/4 7500 psi All 644381-2021-1/4 10,000 psi Pipe or Shear 644831-2126-3/4 3000 psi All 644831-22


*One kit contains softgoods for one bonnet.**Except Large Bore Shear Bonnets


Drill Pipe Shearing Requirements

The minimum shearing configurations needed for each size U BOP to meet the re-quirements of the second edition of API 16A are listed in the following chart. Eachshearing configuration is capable of shearing the corresponding pipe at a closingpressure equal to or less than 2800 psi.

For further information on shearing requirements for different pipe sizes andgrades, please refer to EB702D or contact your Cameron representative.

APIDesignated

SizeRam Type Pressure Rating (psi) Pipe OD (In.) Pipe lb/ft Pipe Grade Shearing Configuration

7-1/16 SBR All 3-1/2 13.3 S Shear Bonnets with Tandem Boosters7-1/16" DSI All 3-1/2 13.3 S Shear Bonnets with Tandem Boosters

11 SBR 10,000 and Lower 5 19.5 E Large Bore Shear Bonnets with Tandem Boosters11 DS/ISR 10,000 and Lower 5 19.5 E Large Bore Shear Bonnets with Tandem Boosters11 SBR 15,000 and Higher 5 19.5 G Large Bore Shear Bonnets with Tandem Boosters

13-5/8 SBR 10,000 and Lower 5 19.5 G Shear Bonnets with Tandem Boosters13-5/8 DS/ISR 10,000 and Lower 5 19.5 G Large Bore Shear Bonnets13-5/8 SBR 15,000 and Higher 5 19.5 S Large Bore Shear Bonnets16-3/4 SBR All 5 19.5 S Large Bore Shear Bonnets18-3/4 SBR All 5 19.5 S Standard Bonnets20-3/4 SBR 3000 and Lower 5 19.5 G Shear Bonnets with Tandem Boosters21-1/4 SBR 3000 and Lower 5 19.5 G Shear Bonnets with Tandem Boosters21-1/4 SBR 5000 and Higher 5 19.5 S Standard Bonnets21-1/4 SBR 10,000 and Higher 5 19.5 G Standard Bonnets

U BOP Lifting Plates

BOP Size (in.) Pressure Rating Lifting Plate Assy Rating (Tons)7-1/16 3000, 5000, 10,000 and 15,000 psi 644930-07 60

11 3000, 5000 and 10,000 psi 644930-03 5011 15,000 psi 644930-02 50

13-5/8 3000, 5000, 10,000 and 15,000 psi 644930-01 5013-5/8 3000, 5000 10,000 and 15,000 psi 644930-05 12016-3/4 3000 and 5000 psi 644930-04 5016-3/4 10,000 psi 644930-01 5016-3/4 3000, 5000 and 10,000 psi 644930-05 12018-3/4 10,000 psi 644930-06 10018-3/4 10,000 psi 2011800-01 10020-3/4 3000 psi 644930-01 5020-3/4 3000 psi 644930-05 12021-1/4 2000 psi 644930-01 5021-1/4 2000 psi 644930-05 12021-1/4 5000 psi 644930-06 10021-1/4 5000 psi 2011800-01 10021-1/4 5000 and 10,000 psi (Special) 644852-03 180

Large Bore Shear Bonnets

ItemNo.

Description(2 Required per Cavity)

113000 psi Model II

115000 psiModel II

1110,000 psiModel II

1115,000 psiModel 79

13-5/83000 psiModel 11

13-5/85000 psiModel II

* Bonnet Assembly (Right) 615195-01 615194-01-00-01 614596-01-00-02 615419-01 615196-01 615191-01-00-01* Bonnet Assembly (Left) 615195-02 615194-02-00-01 614596-02-00-02 615419-02 615196-02 615191-01-00-01

2A Intermediate Flange/Shear 615188-01 615188-01 615188-01 615459-01 615192-01 615192-01-00-013A Bonnet/Shear 615189-03 615189-02 615189-01 615640-01 615143-02 615143-015A Operating Piston/Shear 615190-02-00-01 615190-02-00-01 615190-02-00-01 615457-01 615209-01 615209-0124A O-Ring, Int Flg to Bonnet Lip 702645-45-51 702645-45-51 702645-45-51 702645-45-81 702645-45-81 702645-45-8126A Lip Seal, Operating Piston/Shear 710586 710586 710586 710542 710542 71054242A Wear Ring, Operating Piston/Shear 049223-15 049223-15 049223-15 049223-04 049223-04 049223-04

ItemNo.

Description(2 Required per Cavity)

13-5/810,000 psiModel II

13-5/815,000 psiModel B

16-3/45000 psiModel B

16-3/410,000 psiModel II



* Bonnet Assembly (Right) 614498-01-00-02 615540-01 615530-01 615537-01 615526-01 615525-01* Bonnet Assembly (Left) 614498-02 615540-02 615530-02 615537-02 615526-02 615525-02

2A Intermediate Flange/Shear 614766-01-00-02 615538-01 615528-01 615535-01 615523-01 615523-013A Bonnet/Shear 614772-01 615448-01 615527-01 615534-01 615522-01 615522-025A Operating Piston/Shear 614760-01-00-02 615539-01 615529-01 615536-01 615524-01 615524-0124A O-Ring, Int Flg to Bonnet Lip 702645-45-81 702645-46-51 702645-46-51 702645-46-51 702645-45-81 702645-45-8126A Lip Seal, Operating Piston/Shear 710542 710588 710588 710588 710542 71054242A Wear Ring, Operating Piston/Shear 049223-04 049223-17 049223-17 049223-17 049223-14 049223-14

**Two shear bonnet assemblies, one right and one left, are required per cavity. The shear bonnet assembly consists of all items shown on the illustration.**See pages 22, 23, 24 and 25 for bonnet bolt part numbers.


2A

3A

12A**

Large Bore Shear Ram

24A26A5A42A

SD-017503

Bonnet Assembly


U BOP Large Bore Shear Bonnet Rebuild Softgoods Kit Components

Item Number Description18 Ring, Plastic Packing19 Ring, Plastic Energizing20 Seal Ring, Connecting Rod21* Ring, Backup24 O-Ring, Intermediate Flange to Bonnet25 O-Ring, Operating Piston Rod to Intermediate Flange26 Lip Seal, Operating Piston27 Seal Ring, Tail Rod28 O-Ring, Wiping/Ram Change Piston29 O-Ring, Ram Change Piston to Body30 O-Ring, Ram Change Piston Rod to Intermediate Flange31 O-Ring, Ram Change Cylinder to Intermediate Flange32 O-Ring, Ram Change Cylinder to Bonnet Bolt Retainer33 O-Ring, Ram Change Piston34 O-Ring39 Packing, Plastic42 Wear Ring, Operating Piston

*Not used in somesizes

Large Bore Shear Bonnet Softgoods Kit Part Numbers

BOP Size (in.) Pressure Rating Kit Part Number*11 3000 644860-0111 5000 644860-0211 10,000 644860-0311 15,000 644860-04

13-5/8 3000 644860-0513-5/8 5000 644860-0613-5/8 10,000 644860-0713-5/8 15,000 644860-0816-3/4 5000 644860-0916-3/4 10,000 644860-1020-3/4 3000 644860-1121-1/4 2000 644860-11

*One kit contains softgoods for one bonnet.



Tandem Boosters for U BOPs

A BOP equipped with tandem boosters can deliver increased shearing force while not increasing the

wear and tear on the packers. Tandem boosters approximately double the force available to shear

pipe. Since the tailrod of the tandem booster has the same stroke as the BOPs operating piston, the

standard shear locking mechanism can be installed on the outside end of the booster. For informa-

tion on lock screws and the required spacers, see pages 17, 19 and 21.

For information concerning applications where a tandem booster is required, please refer to

EB702D or consult your local Cameron representative.

ItemNo.

Description

7-1/16 3000, 5000, 10,000 and15,000 psi*

11 3000, 5000, and 10,000 psi20-3/4 3000 psi and

21-1/4 2000 psi

Qty Part Number Qty Part Number Qty Part Number

** Tandem Booster Assembly 1 645414-01 1 645219-01 1 645251-011 Cylinder 2 644959-01 2 645113-01 2 645113-042 Cylinder Head 2 645413-01 2 645171-01 2 645171-033 Piston 2 644961-01 2 2032370-02 2 645172-034 Tailrod 2 644962-01 2 645173-01 2 645173-045 Adapter Plate 2 644963-01 2 645115-01 2 645115-036 Screw, SDC HD Cap 16 018541-34 16 018542-13 16 K2504057 O-Ring 2 702645-24-91 2 702645-36-11 2 702645-37-118 Seal Ring 2 710541 2 712352 2 7105389 Wear Ring, Operating Piston 2 049223-03 2 049223-21 2 049223-0110 Filter, Muffler 2 710621 2 710621 2 710417

11 Seal, Lip 2 212741-32 2 212741-33-00-01 2 212741-34-00-0112 Seal Ring 2 710620 2 712351 2 71041913 Wear Ring, Cylinder 2 644443-02 2 644443-03 2 645215-0114 Seal Ring 2 705955 2 712445 2 71041815 O-Ring 2 702645-33-11 2 702645-33-51 2 702645-33-7116 Alignment Ring 2 645116-02 2 645116-01 2 645116-0317 Pipe Plug 2 201018 2 201018 2 005930-05-10

18 Connector, Tubing 1 675029-09 - - 4 204887-10-06-5719 Cross 1 006347-08 1 675029-52 2 675029-23

20 Nipple, Pipe Regular 1 685904-06-00-30 1 685902-07-00-30 1 685902-07-00-3021 Hose Assembly 2 2708020 2 2708021 2 71137422 Connector, Tubing 2 678046-17 2 204887-10-05-56 - -23 Stud, Double End 16 219065-10-04-41 16 219065-12-05-01 - -24 Connector, Tubing 1 204888-08-05-56 - - - -25 Nipple, Pipe 1 685902-06-01 - - - -26 Connector, Tubing 1 675027-65 2 204887-10-06-56 - -27 Adapter, Pipe - - 2 675029-01 - -

Repair Kit 2164148-01 2164148-03 2164148-02

8

61

4

31415

23

212 11

139

17 7

5

16

10

SD-017504

Tandem Booster Assembly

*The 7-1/16 tandem booster is a part of the standard land and platform shear configuration for 7-1/16 U BOPs.**One assembly includes two tandem boosters.


Tandem Boosters for U BOPs

Item Number Description Qty11 15,000 psi

13-5/8 3000, 5000 and 10,000 psi

** Tandem Booster Assembly 1 2010886-011 Adapter Plate 2 2010885-012 Pipe Plug 2 2010881-013 Cylinder 2 2010884-014 Cylinder Head 2 2010882-015 Tail Rod 2 2010880-016 Piston 2 645172-037 Screw Cap 16 702585-31-00-308 Screw Cap 12 702585-34-01-649 O-Ring 2 702645-33-71

10 Seal, Lip 2 212741-34-00-0111 O-Ring 2 702645-38-1212 Seal Ring 2 71041813 Wear Ring 2 645215-0114 Wear Ring 2 049223-0115 Seal Ring 2 70477216 Filter, Quiet Muffler 2 272404217 Stud, Double Ended 2 702533-09-10-2218 Connector, Tubing 2 204887-10-06-5719 Cross 1 675029-2320 Nipple, Pipe 1 685902-07-00-3021 Hose Assembly 2 272453822 Connector, Tubing 2 -23 Gland, Tubing 2 017454-0824 Blind Plug 2 017454-0925 Elbow 2 71440726 Pipe Plug 2 002504-28- Repair Kit - 2164148-02


SD 034591

8

4

1213

6

5

7

9

10

24

11

3

14

15

2

16

17

1

23

**One assembly includes two tandem boosters.


U and UM BOP Standard Accessories

U and UM BOP Standard Accessories

Size and Working Pressure RamLube*Cameron

Box Wrench*Allen Wrench*Packing Screw Handwheel** Universal Joint**

ExtensionWrench*

7-1/16 3000 psi 713878 713114-08 008721-01 005457 006018-01 0056527-1/16 5000 psi 713878 713114-08 008721-01 005457 006018-01 0056527-1/16 10,000 & 15,000 psi 713878 713114-10 008721-01 005457 006018-01 00565211 3000, 5000 & 10,000 psi 713878 713114-10 008721-01 005298 006018-03 00552611 15,000 psi 713878 713114-13 008721-01 005298 006018-03 00552613-5/8 3000 & 5000 psi 713878 713114-10 008721-01 005298 006018-03 00552613-5/8 10,000 psi 713878 713114-13 008721-01 005298 006018-03 00552613-5/8 15,000 psi 713878 *** 008721-01 005298 006018-03 00552616-3/4 3000 & 5000 psi 713878 713114-13 008721-01 005298 006018-03 00552616-34/4 10,000 psi 713878 *** 008721-01 005298 006018-03 00552618-3/4 10,000 psi 713878 *** 008721-01 005298 006018-03 00552620-3/4 3000 psi 713878 713114-08 008721-01 005298 006018-03 00552621-1/4 2000 psi 713878 713114-10 008721-01 005298 006018-03 00552621-1/4 5000 psi 713878 *** 008721-01 005298 006018-03 00552621-1/4 10,000 psi 713878 *** 008721-01 005298 006018-03 00552626-3/4 3000 psi 713878 713114-13 008721-01 005298 006018-03 005526


*One required**Two required for single preventer, four for double preventer.***Commercially available sockets are recommended.

U, UL and UM BOP Pipe Rams

The standard "U" BOP pipe rams are interchangeable for the U, UL and UM BOP's.

Pipe rams are available for use in Cameron U, UL and UM BOPs to fit all commonlyused sizes of tubing, drill pipe, drill collar or casing within the ranges in the chartson the following pages. Cameron pipe rams include the following features:

Cameron pipe rams are self-feeding and incorporate a large reservoir ofpacker rubber to ensure a long-lasting seal under all conditions.

Ram packers lock into place and are not dislodged by well flow. All Cameron pipe rams are suitable for H2S service per NACE MR-01-75. CAMRAM top seals are standard for all U, UL and UM BOP pipe rams from

7-1/16 through 18-3/4 sizes. Packer part numbers beginning with 644xxxindicate the CAMRAM lipped-plate design. Other part numbers may usestandard elastomer material and reinforced plates. Verify this with yourCameron representative.

CAMRAM 350 packers and top seals are available for high temperature service andfor service in which concentrations of H2S are expected.


U, UL and UM BOP PipeRam

Part Numbers for U, UL & UM BOP Pipe Rams

Pipe Size(in.)

7-1/163000, 5000, 10,000, and 15,000 psi WP

Top Seal 644214-01-00-01

113000, 5000, and 10,000 psi WP

Top Seal 644217-01-00-01Assembly Ram Packer Assembly Ram Packer

Blind 644504-01 644500-01-00-02 644215-01-00-01 644219-01 044118-01 644218-01-00-011.050 644504-02 644501-01 644215-02 - - -1.315 644504-03 644501-02 644215-03 044233-25 044118-07 644218-02-00-011.660 644504-04 644501-03 644215-04-00-01 044233-02 044118-02 644218-03-00-011.900 644504-05 644501-04 644215-05-00-01 044233-03 044118-03 644218-04-00-012.062 644504-06 644501-05 644215-06-00-01 044233-04 044118-04 644218-05-00-012.375 644504-07 644501-06 644215-07-00-01 644219-06 044118-05 644218-06-00-012.875 644504-08 644501-07 644215-08-00-01 644219-07 044118-06 644218-07-00-013.500 644504-09 644502-01-00-01 644215-09-00-01 644219-08 644835-01-00-02 644218-08-00-014.000 644504-11 644503-02 644215-11-00-01 644219-10 044119-02 644218-10-00-014.500 644504-12 644503-03 644215-12-00-01 644219-11 644835-02 644218-11-00-014.750 - - - 044233-12 044119-04 644218-135.000 644504-14 644503-05 644215-14-00-01 644219-14 644835-03-00-01 644218-14-00-015.500 644504-15 644503-06 644215-15-00-01 644219-16 044120-01 644218-16-00-015.750 - - - 044233-23 044120-10 644218-175.875 - - - - - -6.000 - - - 044233-16 044120-02 644218-18-00-016.625 - - - 044233-17 644835-04 644218-19-00-017.000 - - - 044233-18 044120-04 644218-20-00-017.625 - - - 044233-19 044120-05 644210-21-00-017.750 - - - 044233-22 044120-09 644218-22-00-018.625 - - - 044233-20 044120-06 644218-23-00-019.000 - - - - - -9.625 - - - - - -10.750 - - - - - -11.750 - - - - - -3.500

Aluminum 644504-10 644503-01 644215-10 044233-08 044119-06 644218-09

4.500Aluminum 644504-13 644503-04 644215-13 044233-11 044119-07 644218-12

5.000Aluminum - - - 044233-24 044119-08 644218-15





Pipe Size(in.)

1115,000 psi WP

Top Seal 2010453-01

13-5/83000, 5000, and 10,000 psi WP

Top Seal 644223-01-00-01Assembly Ram Packer Assembly Ram Packer

Blind 644222-01 044121-01 644221-01 644225-01 044147-01-00-01 644224-01-00-011.050 - - - - - -1.315 - - - 644225-02 044148-06 644224-021.660 644222-02 044121-02 644221-02 644225-03 044148-05 644224-031.900 644222-03 044121-03 644221-03 644225-04 044148-07 644224-042.062 644222-04 044121-04 644221-04 644225-05 044148-03 644224-052.375 644222-05 044121-05 2010454-05 644225-06 044148-01-00-01 644224-06-00-012.875 644222-06 044121-06 2010454-06 644225-07 044148-02-00-01 644224-07-00-013.500 644222-07 644753-01 2010454-07 644225-08 644738-01-00-01 644224-08-00-014.000 644222-08 044122-04 2010454-08 644225-10 044149-02 644224-10-00-014.500 644222-09 644753-02 2010454-09 644225-11 644738-02 644224-11-00-014.750 - - - 644225-13 044150-01 644224-135.000 644222-10 644753-03 2010454-10 644225-14 644738-03-00-01 644224-14-00-015.500 044234-13 044123-01 2010454-11 644225-16 044150-03 644224-16-00-015.750 - - - - - -5.875 - - - 644225-30 644738-06-00-01 644224-29-00-016.000 044234-14 044123-02 690808-13 044244-13 044150-04 644224-176.625 044234-15 044123-03 690808-14 644225-18 644738-04-00-02 644224-18-00-017.000 044234-16 044124-01 2010454-14 644225-19 044151-01-00-01 644224-19-00-017.625 044234-17 044124-02 690808-16 644225-20 044151-02 644224-20-00-017.750 - - - 044244-25 044151-06 644224-218.625 - - - 044244-16 044151-03 644224-229.000 - - - 044244-24 044151-04 644224-239.625 - - - 644225-24 044151-05-00-01 644224-24-00-0110.750 - - - 644225-25 044152-01 644224-25-00-0111.750 - - - 044244-26 614208-01 644224-26-00-013.500

Aluminum - - - 044244-20 044149-04 644224-09

4.500Aluminum - - - 044244-10 044149-05 031215-17

5.000Aluminum - - - 044244-32 044150-08 031215-27




Pipe Size(in.)

13-5/815,000 psi

Top Seal 644226-01-00-01

16-3/43000, 5000, and 10,000 psiTop Seal 644229-01-00-01

Assembly Ram Packer Assembly Ram Packer

Blind 644228-01 044143-01 644227-01-00-01 644231-01 044179-01 644230-01-00-011.050 - - - - - -1.315 - - - - - -1.660 - - - - - -1.900 - - - 644231-02 044180-03 644230-02-00-012.062 044243-02 044144-03 040910-20 - - -2.375 644228-03 044144-01 644227-03-00-01 644231-03 044180-01 644230-032.875 644228-04 044144-02 644227-04-00-01 644231-04 044180-02 644230-043.500 644228-05 644739-01 644227-05-00-01 644231-05 644740-01 644230-05-00-014.000 644228-07 044144-06 644227-07-00-01 644231-06 044181-02 644230-06-00-014.500 644228-08 644739-02 644227-08-00-01 644231-07 644740-02 644230-07-00-014.750 044243-10 044145-01 644227-10 644231-08 044181-04 644230-08-00-015.000 644228-11 644739-03 644227-11-00-01 644231-09 644740-03 644230-09-00-015.500 044243-12 044145-03 644227-12-00-01 644231-10 044181-06 644230-10-00-015.750 - - - - - -5.875 2164172-07 2724029-06 644227-24-00-01 644231-22 2724030-06 644230-236.000 044243-14 044145-04 040910-09 644231-11 049291-01 644230-116.625 044243-15 644739-04 644227-14-00-01 644231-12 049291-02 644230-127.000 044243-16 044146-01 644227-15-00-01 644231-13 049291-03 644230-137.625 044243-17 044146-02 644227-16-00-01 644231-14 049291-04 644230-147.750 044243-22 044146-07 644227-17 - - -8.625 044243-18 044146-03 644227-18 644231-15 049291-06 644230-15-00-019.000 044243-19 044146-04 040910-14 644231-16 049291-07 644230-16-00-019.625 044243-20 044146-05 644227-20-00-01 644231-17 049292-01 644230-17-00-0110.750 044243-21 044146-06 644227-21-00-01 644231-18 049292-02 644230-18-00-0111.750 - - - 644231-19 049292-03 644230-19-00-0113.375 - - - 644231-20 049292-04 644230-20-00-0113.625 - - - - -13.750 - - - - - -16.000 - - - - - -3.500

Aluminum 044243-06 044144-05 644227-06 - - -

4.500Aluminum 044243-08 044144-08 040910-05 - - -

5.000Aluminum - - - - - -



Pipe Size(in.)

18-3/410,000 psi

Top Seal 644232-01-00-01

21-1/45000 and 10,000 psiTop Seal 2010939-01


Blind 644234-01 044184-01 644233-01-00-01 044262-01 044214-01 2010851-191.050 - - - - - -1.315 - - - - - -1.660 - - - - - -1.900 - - - - - -2.062 - - - - - -2.375 044254-02 044185-01 644233-02 044262-02 044215-01 2010851-012.875 044254-03 044185-02 644233-03-00-01 044262-03 044215-02 2010851-023.500 644234-04 644741-01 644233-04-00-01 44262-04 644743-01 2010851-034.000 044254-06 044185-05 644233-06 044262-06 044215-05 040962-044.500 044254-07 644741-02 644233-07 044262-07 644743-02 2010851-054.750 044254-09 044185-08 041856-06 044262-09 044215-08 040962-065.000 644234-10 644741-03 644233-10-00-01 044262-10 644743-03 2010851-075.500 044254-11 044185-10 644233-11-00-01 044262-11 044215-10 2010851-085.750 - - - - - -5.875 644234-21 2724031-06 644233-21-00-01 044262-32 2724033-06 2010851-296.000 044254-13 044185-12 041856-09 044262-13 044215-12 040962-096.625 044254-14 044185-13 644233-13-00-01 044262-14 044215-13 2010851-107.000 044254-15 044185-14 644233-14-00-01 044262-15 044215-14 2010851-117.625 044254-16 044185-15 041856-12 044262-16 044215-15 040962-127.750 - - - - - -8.625 044254-17 044185-16 041856-13 044262-17 044215-16 040962-139.000 044254-18 044185-17 041856-14 044262-18 044215-17 040962-149.625 044254-19 044185-18 644233-18-00-01 044626-19 044215-18 040962-1510.750 044254-21 044185-21 644233-19-00-01 044262-20 044216-01 040962-2011.750 - - - 044262-21 044216-02 2010851-2013.375 044254-22 044185-20 644233-20-00-01 044262-22 044216-03 2010851-2213.625 - - - 044262-24 044216-05 040962-2413.750 - - - - - -16.000 - - - 044262-23 044216-04 2010851-233.500

Aluminum 044254-05 044185-04 041856-16 044262-05 044215-04 040962-16

4.500Aluminum 044254-08 044185-07 041856-17 044262-08 044215-07 040962-17

5.000Aluminum - - - - - -




Pipe Size(in.)

21-1/4 Bore 2000 psi20-3/4 Bore 3000 psiTop Seal 2163621-01

26-3/4 Bore2000 and 3000 psi

Top Seal 2163566-01


Blind 044256-01 044191-01 2163612-01 044260-01 044209-01 2163561-011.050 - - - - - -1.315 - - - - - -1.660 - - - - - -1.900 - - - - - -2.062 - - - - - -2.375 - - - 044260-02 614017-01 2163559-012.875 - - - 044260-03 614017-02 2163559-023.500 044256-02 645328-01 2163613-03 044260-04 614018-01 2163599-034.000 044256-03 044192-02 031228-04 044260-05 614018-02 2163599-044.500 044256-04 645328-02 2010583-05 044260-06 614018-03 2163599-054.750 044256-05 044192-04 031228-06 - - -5.000 044256-06 645328-03-00-01 2163613-06 044260-07 614018-04 2163599-065.500 044256-07 044193-02 2163613-07 044260-08 614018-05 2163599-075.750 - - - - - -5.875 044256-32-00-01 645328-05-00-01 2163613-18 - - -6.000 044256-08 044193-03 031228-09 044260-09 614019-01 2163559-086.625 044256-09 645328-04 2010583-10-01 044260-10 614019-02 2163559-097.000 044256-10 044193-05 031228-11 044260-11 614019-03 2163559-107.625 044256-11 044193-06 2010583-12 044260-12 614019-04 2163559-017.750 - - - - - -8.625 044256-13 044193-08 2010583-14 - - -9.000 044256-14 044193-09 031228-15 044260-14 614019-06 2163599-139.625 044256-15 044193-10 031228-16 044260-15 614020-01 2163599-1410.750 044256-16 044194-01 2010583-17 044260-16 614020-02 2163599-1511.750 044256-17 044194-02 031228-18 044260-17 614020-03 2163599-1613.375 044256-18 044194-03 2163613-15 044260-18 614020-04 2163599-1713.625 044256-21 044194-05 2163613-20 - - -13.750 044256-19 044194-04 031228-19 - - -16.000 044256-20 044195-01 2010583-21 044260-19 614021-01 2163559-1818.625 044256-22 614459-01 031228-25 - - -20.000 - - - 044260-20 614021-02 2163559-21



Hang-Off Weights

Hang-off weights are estimated capacities with hardened top corners of the hang-off rams. This en-

ables the rams to dig into the tool joint and provide superior hang-off capacity while still meeting

NACE requirements.

For variable bore rams (VBRs) and FLEXPACKER rams hang-off data, refer to Cameron Engineering

Bulletin 859D.

Hang-Off Weights(See Cameron Engineering Bulletin EB636D)

Pipe Size Pipe Rams

3-1/2" 425,000 lb4-1/2" 550,000 lb

5" 600,000 lb5-1/2" 600,000 lb6-5/8" 600,000 lb

U BOP Shearing Blind Rams and DS Rams

Cameron shearing blind rams shear the pipe in the hole, then bend the lower section of sheared pipe

to allow the rams to close and seal. Shearing blind rams can be used as blind rams during normal drill-

ing operations.

The DS shearing blind ram can cut large diameter tubulars or multiple tubing strings regardless of

their orientation to the centerline of the ram. A blade seal between the upper and lower faces elimi-

nates the need for moving pipe after shearing.

Features of shearing blind rams and DS rams include:

Large frontal area on the blade face seal reduces pressure on the rubber and increases service

life.

Cameron SBRs can cut pipe numerous times without damage to the cutting edge.

The single-piece body incorporates an integrated cutting edge.

CAMRAMTM

top seals are standard for all U BOP shearing blind rams through 18-3/4.

For U and UII BOPs through 18-3/4, part numbers beginning with 644XXX indicate the

CAMRAM lipped-plate design. Other part numbers may use standard elastomer material and

reinforced plates. Verify this with your Cameron representative.

Cameron SBRs, both with inserted and integral blades, meet the H2S requirements of both

API 16A and NACE MR-0175. Sulfide stress cracking susceptible materials are used for the

blades, however, the main body of the SBRs are made of sulfide stress cracking resistant

materials.



Shearing Blind Ram

U, UL and UM BOP Shearing Blind Ram Part Numbers

BOP Bore Size andWorking Pressure

Description and Item Number

1Upper Ram Subassy

2Body*

3Blade Packer*

4Side Packer*

5Side Packer*

7-1/16 5000,10,000, 15,000 psi 046792-01-00-03 046210-01-00-04 - 2010873-02 2010873-01

11 5000, 10,000 psi 049392-01-00-02 049009-01-00-02 046910-04-00-01 046751-04-00-01 046752-04-00-0111 15,000 psi 2010458-01 2010459-01 046910-04-00-01 2010460-07 2040461-0713-5/8 5000, 10,000psi 046748-01-00-01 046749-01-00-01 046910-01-00-01 046751-01-00-02 046752-01-00-02

13-5/8 15,000 psi 614004-01-00-02 2010291-01 046910-01-00-02 046751-05-00-01 046752-05-00-0116-3/4 5000 psi 046766-01-00-01 049006-01-00-01 046910-03-00-01 046751-03-00-01 046752-03-00-0116-3/4 10,000 psi 046773-01-00-01 046774-01-00-01 046910-03-00-01 046751-03-00-01 046752-03-00-0118-3/4 10,000 psi 2010211-01 2010213-01 2010192-01 2010191-01 2010190-0120-3/4 3000 psi 046783-01-00-02 046784-01-00-02 - 615235-01-00-02 -21-1/4 2000 psi 046783-01-00-02 046784-01-00-02 - 615235-01-00-02 -21-1/4 5000 psi 049983-01 049961-01 046910-05-00-01 046751-06-00-01 046752-06-00-0121-1/4 7500, 10,000psi 046788-01 049012-01 046910-05-00-01 046751-06-00-01 046752-06-00-01

BOP Bore Size andWorking Pressure


6Lower Ram Subassy**

7Body

8Side Packer

9Side Packer

10Top Seal

(2 Required)7-1/16 5000,10,000, 15,000 psi 046792-02-00-03 046212-01-00-04 2010872-01 - 644214-01-00-01

11 5000, 10,000 psi 049392-02-00-02 049010-01-00-02 046751-04-00-01 046752-04-00-01 644217-01-00-0111 15,000 psi 2010458-02 2010459-02 2010460-07 2010461-07 2010453-0113-5/8 5000, 10,000psi 046748-02-00-01 046750-01-00-01 046751-01-00-02 046752-01-00-02 644223-01-00-01

13-5/8 15,000 psi 614004-02-00-02 2010292-01 046751-05-00-01 046752-05-00-01 644226-01-00-0116-3/4 5000 psi 046766-02-00-01 049007-01-00-01 046751-03-00-01 046752-03-00-01 644229-01-00-0116-3/4 10,000 psi 046773-02-00-01 046775-01-00-01 046751-03-00-01 046752-03-00-01 644229-01-00-0118-3/4 10,000 psi 2010210-01 2010212-01 2010191-01 2010190-01 2010193-0120-3/4 3000 psi 046783-02-00-02 046785-01-00-02 615247-01-00-02 615247-02-00-02 2163621-0121-1/4 2000 psi 046783-02-00-02 046785-01-00-02 615247-01-00-02 615247-02-00-02 2163621-0121-1/4 5000 psi 049983-02 049982-01 046751-06-00-01 046752-06-00-01 645478-01-00-0121-1/4 7500, 10,000psi 046788-02 049011-01 046751-06-00-01 046752-06-00-01 645478-01-00-01

*Part of Upper Ram Assembly.



H2S Shearing Blind Ram

U, UL and UM BOP H2S Shearing Blind Ram Part Numbers

BOP Bore Sizeand WorkingPressure (psi)

1Upper Ram

Subassy

2Ram

3Blade Packer

4Packer

5Packer

6Top Seal

7Blade Insert

8Set Screw

(Qty 2 Req'd)11 5000 and

10,000 645011-03-00-01 645009-01-00-01 046910-04-00-01 046751-04-00-01 046752-04-00-01 644217-01-00-01 645010-01-00-01 644582-01

13-5/8 5000 and10,000 644781-01-00-01 644780-01-00-01 644435-01-00-01 046751-01-00-02 046752-01-00-02 644223-01-00-01 644581-01-00-01 644582-01

13-5/8 15,000 2163019-01-01 2163017-01-01 644435-01-00-01 046751-05-00-01 046752-05-00-01 644226-01-00-01 216481-01 644582-0118-3/4 10,000 2010186-01 2010187-01 2010192-01 2010191-01 2010190-01 2010193-01 2010182-01 644524-01

BOP Bore Sizeand Working

Pressure (psi)9

Lower RamSubassy

10Ram

11Packer

12Packer

13Top Seal

14Blade Insert

15Pin

(Qty 2 Req'd)11 5000 and

10,000 645011-04-00-01 645009-02-00-01 046751-04-00-01 046752-04-00-01 644217-01-00-01 645010-02-00-01 200231

13-5/8 5000 and10,000 644781-02-00-01 644780-02-00-01 046751-01-00-02 046752-01-00-02 644223-01-00-01 644581-02-00-01 200231

13-5/8 15,000 2163019-02-01 2163018-01-01 046751-05-00-01 046752-05-00-01 644226-01-00-01 644581-02-00-01 200231

18-3/4 10,000 2010186-02 2010188-01 2010191-01 2010190-01 2010193-01 2010183-01 200231

Severe Service U, UL and UM BOP H2S Shearing Blind Ram Part Numbers

BOP Bore Sizeand WorkingPressure (psi)

1Upper Ram

Subassy

2Ram

3Blade Packer

4Packer

5Packer

6Top Seal

7Blade Insert

8Set Screw

(Qty 2 Req'd)11" 10,000 645011-01-00-01 645009-01-00-01 644834-04-00-01 2164284-04 2164285-04 644703-01-00-01 645010-01-00-01 644582-01

13-5/8 5000 and10,000 644781-03-00-01 644780-01-00-01 644834-01-00-01 645427-01-00-01 645428-01-00-01 644707-01-00-01 644581-01-00-01 644582-01

13-5/8 15,000 2163019-01-02 2163017-01-01 644834-01-00-01 644832-01-00-01 644833-01-00-01 644709-01-00-01 2164281-01 644582-01


Pressure (psi)9

Lower RamSubassy

10Ram

11Packer

12Packer

13Top Seal

14Blade Insert

15Pin

(Qty 2 Req'd)11" 10,000 645011-02-00-01 645009-02-00-01 2164284-04 2164285-04 644703-01-00-01 645010-02-00-01 200231

13-5/8 5000 and10,000 644781-04-00-01 644780-02-00-01 645427-01-00-01 645428-01-00-01 644707-01-00-01 644581-02-00-01 200231

13-5/8 15,000 2163019-02-02 2163018-01-01 644832-01-00-01 644833-01-00-01 644709-01-00-01 644581-02-00-01 200231


U, UL & UM BOP DS Shearing Blind Ram

U BOP DS Shearing Blind Ram

BOP Size andWorking

Pressure (psi)

Description and Item Number1*

Upper RamAssembly

2*Body

3*Side

Packer

4*Side

Packer

5*BladeSeal

6*BladeSeal

11 5000 and10,000 645078-01-00-04 645079-01-00-04 645080-02-00-01 645080-01-00-01 645031-02-00-01 645031-02-00-01

13-5/8 5000 and10,000 645026-01-00-04 645027-01-00-04 2010985-01 2010985-02 2010986-01 2010986-02

BOP Size andWorking

Pressure (psi)7**

Lower RamSubassembly

8**Body

9**Side

Packer

10**Side

Packer

11***Top Seal

(2 Required)11 5000 and

10,000 645078-02-00-04 645079-02-00-04 645080-02-00-01 645080-01-00-01 644217-02-00-01

13-5/8 5000 and10,000 645026-02-00-04 645027-02-00-04 2010985-01 2010985-02 645033-01-00-01

*Part of Upper Ram Assembly**Part of Lower Ram Assembly***Part of Upper and Lower Ram Assemblies



ISR Shearing Blind Ram

Interlocking Shear Ram (ISR) is available for the U type BOP line. The ISR rams provide an improved

shearing capacity alternative to the standard SBR rams, and should only be used when the standard

rams cannot handle the desired shearing load. Since the geometry of the ISR ram incorporates a V

shape and is designed as wide as possible, it can shear multiple strings and drill pipe as large as 6-5/8

OD. Also, ISR rams do not have to fold over the lower fish. This means less force is required to shear

and, by leaving the fish open, kill mud can be pumped down the severed drill string. The interlocking

mechanism incorporated in the ISR means that these rams can be utilized in an oversized cavity with-

out fear of a leak at low wellbore pressures.

U and UM BOP ISR Shearing Blind Ram


Pressure (psi)


Upper RamSubassembly Body

SidePacker

SidePacker

TopSeal

BladeSeal (1)

BladeSeal (1)

13-5/83000, 5000 and

10,0002164775-01 2164773-01 *2010985-01 *2010985-02 645033-01-00-01(**2231241-01) *2010986-01 *2010986-02


Pressure (psi) Lower RamSubassemblyBody Side

PackerSide

PackerTopSeal

13-5/83000, 5000 and

10,0002164776-01 2164774-01 *2010985-01 2010985-02 645033-01-00-01(**2231241-01)

*Cameron Blade and Side Packers qualify to API 16A, 2nd Edition Appendix C high temperature verification test requirements and success-fully complete Cameron required additional 8 hour hold test at 250 degrees F.**High Temp Top Seal


SD 034603

7

5

10

4

2

12

9

113

6



U, UL and UM BOP DSI and DVS Shear Rams

Dual string interlocking (DSI) shear rams and double V shear (DVS) rams are also available for the U, UL

and UM BOPs. The interlocking feature of these rams provides the capability of shearing wireline and

braided cable with zero tension in the line, while still maintaining a seal. The blades are interlocked by us-

ing pockets in the lower ram and arms on the upper ram to prevent any gap between blade surfaces.

DSI rams are similar to standard DS shear rams except for the interlock feature. DSI shear rams are capable

of shearing tubing, small pipe, braided cable, slickline and solid sinker bar.

DVS rams are similar in design to the standard shearing blind rams except that both blades are V shaped

and interlocked. The DVS rams are capable of shearing tubing, small pipe, braided cable and slickline.

Double V Shear (DVS) Shear Rams

Dual String Interlocking (DSI) Shear Rams

SD 034613

Top Seal

Top Seal

UpperRam Body

UpperRam Body

Blade Packer

SidePacker

Blade SealUpper Shear RamSide Packer

Lower Shear Ram

Side PackerUpper Shear Ram

Lower Ram Body

Lower Ram Body


U, UL and UM BOP Variable Bore Rams(VBR and VBR-II)

The Cameron VBR-II is the next genera-

tion of the highly popular Cameron vari-

able bore ram (VBR) packer. The VBR-II

accommodates a range of pipe sizes and

may be used in existing Cameron variable

bore rams. The VBR-II seals on a range of

drill pipe sizes as well as hexagonal kellys

and provides uniform sealing pressure

with virtual elimination of extrusion

paths.

As indicated in the chart below, the VBR-II

is the standard VBR in most common

sizes. In sizes where the VBR-II is not specified in the chart, the popular Cameron VBR is the standard

offering. VBR-II packers for other size BOPs and other pipe size ranges are available upon request.

U, UL and UM BOP Variable Bore Ram Part Numbers

BOP Size and WorkingPressure (psi)

Pipe SizeRange

RamSubassembly

RamBody Packer

TopSeal

7-1/16 3000, 5000, 10,000and 15,000 3-1/2 to 2-3/8 615066-01 615065-01 614616-02 644214-02-00-01

7-1/16 3000, 5000, 10,000and 15,000 4 to 2-7/8 644901-01 614605-01 614616-02 644214-02-00-01

11 3000, 5000 and 10,000VBR-II 5 to 2-7/8 645360-01 644836-01 644926-02 644217-01-00-01

11 15,000 5 to 2-7/8 2010465-01 2010463-01 2010464-01 2010453-0213-5/8 3000, 5000 and10,000 VBR-II 7 to 4-1/2 046675-01 046671-01-00-02 644924-03 644223-02-00-01

13-5/8" 3000, 5000 and10,000 VBR-II 5-7/8" to 3-1/2" 2164664-01 2164404-01 2164599-01 644223-02-00-01

13-5/8 3000, 5000 and10,000 VBR-II 5-1/2 to 3-1/2 2163945-01 2011438-01 645089-02-00-01 644223-02-00-01

13-5/8 3000, 5000 and10,000 VBR-II 5 to 2-7/8 645166-01 644744-01-00-04 645089-02-00-01 644223-02-00-01

13-5/8 15,000 7 to 5 614104-01 614146-01 644924-02 644226-02-00-0113-5/8" 15,000 5-7/8" to 3-1/2" 614129-03-00-02 644745-03-00-02 645089-03 644226-02-00-0113-5/8 15,000 5 to 3-1/2 614129-01 644745-01 644921-01 644226-02-00-0116-3/4 3000 and 5000 7 to 3-1/2 046676-01 046672-01 644920-01-00-01 644229-01-00-0116-3/4" 10,000 7" to 5" 046676-01 046672-01 644920-01-00-01 644229-01-00-0116-3/4 10,000 5 to 2-7/8 2163175-01 644746-01-00-01 645128-01-00-01 644229-02-00-0116-3/4 10,000 5-1/2 to 3-1/2 2164605-01 2164603-01 645128-01-00-01 644229-02-00-0118-3/4 10,000 VBR-II 7-5/8 to 3-1/2 046677-01 046673-01 644927-02 644232-03-00-0121-1/4 5000 and 10,000 5-7/8 to 2-7/8 2164444-01 2164408-01 2164423-01 2164440-01

U, UL and UM BOP Extended Range High Temperature VBR-II

BOP Size and Working Pressure Pipe Size Range Ram Subassembly Ram Body Packer Top Seal13-5/8" 3000, 5000 and 10,000 5-7/8" to 3-1/2" 2164806-01 2164404-01 2164765-01 2164807-01

Note: For additional information, refer to Cameron Information Sheet 02-001



U, UL and UM BOPFLEXPACKER and FLEXPACKER-NR

The Cameron Flexpacker ram is the latest development in multiple-bore sealing. Each Flexpacker ram

is designed to close and seal around several diameters of tubing and pipe. The Cameron

Flexpacker-NR is a narrow range variable bore ram packer designed for use with tapered drill strings.

These packers are designed to fit standard fixed bore Cameron pipe rams.

FLEXPACKER Sizes and Part Numbers

Bore Size and WorkingPressure (psi)

Pipe SizeRange

PackerPart Number

Top SealPart Number

113000, 5000 and 10,000 2-3/8 to 3-1/2 *2011740-01 644217-01-00-01

13-5/83000, 5000 and 10,000 2-3/8 to 3-1/2 *2011716-01 644223-01-00-01

18-3/410,000 2-7/8 to 5 645346-01 644232-04

20-3/43000 5 to 7 645353-01 2163621-01

21-1/42000 5 to 7 645353-01 2163621-01

FLEXPACKER-NR Sizes and Part Numbers

BOP Size and Working Pressure (psi) Pipe Size Range Part Number11 3000, 5000 and 10,000 2-3/8 x 3-1/2 2011740-0111 3000, 5000 and 10,000 3-1/2 x 5 2163445-0113-5/8 3000, 5000 and 10,000 2-3/8 x 3-1/2 2011716-0113-5/8 3000, 5000 and 10,000 3-1/2 x 5 2011673-0113-5/8 3000, 5000 and 10,000 5 x 6-5/8 2011688-0118-3/4 10,000 5 x 6-5/8 2011907-0118-3/4 10,000 3-1/2 x 5 2011701-01

U, UL and UM BOP Rams for Multiple Completions

Cameron offers non-sealing centralizing rams and companion subsea dual rams for use with two

strings. For more information on these rams, please contact your local Cameron representative.

*Flexpacker NR


Inserted Packers

The Cameron Inserted Packer for stripping/snubbing service is designed with a field replaceable,wear-resistant, non-rotating insert block. The insert block is fabricated from a specially formulated ul-tra-high molecular weight polyethelyne (UHMW-PE) which extends service life. The insert block is de-signed to be self-locking in the packer and should not require screws or other fasteners to hold it inplace. The Cameron design eliminates the major causes of failure for inserted packers using semicircu-lar inserts held in place with screws, including rapid insert wear out and insert rotation resulting inpermanent packer damage.

Inserted Packer Sizes and Part Numbers

BOP Size andWorking Pressure (psi) Pipe Size

Packer AssemblyPart Number

InsertPart Number

Modified PackerPart Number

7-1/16 15,000 2-3/8 2010833-04 2010771-04 2010813-047-1/16 15,000 2-7/8 2010833-05 2010771-05 2010813-057-1/16 15,000 3-1/2 2010833-06 2010771-06 2010813-067-1/16 15,000 4 2010833-08 2010771-08 2010832-027-1/16 15,000 4-1/2 2010833-07 2010771-07 2010832-0111 10,000 2-3/8 2010952-01 2010938-01 2010937-0111 10,000 2-7/8 2010952-02 2010938-02 2010937-0211 10,000 3-1/2 2010952-03 2010938-03 2010937-0311 10,000 4 2010952-06 2010938-06 2010937-0611 10,000 4-1/2 2010952-04 2010938-04 2010937-0411 10,000 5 2010952-05 2010938-05 2010937-05

Initial Ordering Order packer assembly, which includes plastic wear insert. When insert wears out

and elastomer portion of packer is still in serviceable condition, order insert only. Modified packer

part number is for reference only and is used to define the insert pocket machined in already molded

packer. The insert is fit into this pocket.

Insert Removal Carefully pry worn insert from cavity in packer using appropriate tool such as large

screwdriver. Once removed, install new insert using a soft mallet to drive the insert into the pocket.

Note, the insert has a pair of locking devices on the side of the insert, which engages the packer elas-

tomer and prevents insert loss.

Insert Information The insert is designed for use in flat plate packers only. They will not fit

CAMRAM packers with top and bottom lipped plates.


CAMRAM 350 Packers and Top Seals for U BOPs

CAMRAM 350 U BOP pipe ram packers and top seals are available for applicationswhich require high temperature capabilities and greater H2S resistance than stan-dard CAMRAM packers and top seals.

CAMRAM 350 is available in all U BOP sizes in which standard CAMRAM packers andtop seals are offered.

CAMRAM packers in drill pipe sizes feature the Cameron patented lipped plate de-sign. All packers also have chamfered ends on the top and bottom reinforcing platesto prevent ram bore scoring and reduce elastomer extrusion.

All packers and top seals are molded using CAMLASTTM high performance elastomerfrom Cameron Elastomer Technology.

U BOP CAMRAM 350 Part Numbers

PipeSize(in.)

7-1/163000-15,000

psi

113000-10,000

psi

1115,000

psi

13-5/83000-10,000

psi

13-5/815,000

psi

16-3/43000-10,000

psi

18-3/410,000

psi

20-3/43000 psi21-1/4

2000 psiTop Seal Top Seal Top Seal Top Seal Top Seal Top Seal Top Seal Top Seal

644701-01 644703-01-00-01 644705-01 644707-01-00-01 644709-01-00-01 644711-01 644713-01-00-01 2164113-01Packer Packer Packer Packer Packer Packer Packer Packer

Blind 644700-01 644702-01 644704-01 644706-01-00-01 644708-01 644710-01 644712-01 2164105-012.375 644700-07 644702-06 644704-05 644706-06-00-01 644708-03 --- --- 2164105-022.875 644700-08 644702-07 644704-06 644706-07-00-01 644708-04 644710-04 --- 2164105-033.500 644700-09 644702-08 644704-07 644706-08-00-01 644708-05-00-01 644710-05 644712-04 2164105-044.000 644700-11 644702-10 644704-08 644706-10-00-01 644708-07-00-01 644710-06 --- 2164105-054.500 644700-12 644702-11 644704-09 644706-11-00-01 644708-08 644710-07 --- 2164105-065.000 644700-14 644702-14 644704-10 644706-14-00-01 644708-11 644710-09 644712-10 2164105-075.500 644700-15 644702-16 --- 644706-16-00-01 644708-12 644710-10 644712-11 2164105-085.875 --- --- --- 644706-29-00-01 --- 644710-21 --- 2164105-096.625 --- --- --- 644706-18-00-01 644708-14 --- --- ---7.000 --- 644702-20 --- 644706-19-00-01 644708-15-00-01 --- --- ---7.625 --- 644702-21 644704-15 644706-20-00-01 644708-16 --- --- ---9.625 --- --- --- 644706-24-00-01 644708-20-00-01 --- --- ---10.75 --- --- --- --- 644708-21 --- --- ---

13.375 --- --- --- --- --- 644710-20 644712-20 2164105-17

Note: 20 and 21 packers are Severe Service and are technically not CAMRAM 350. They do not incorporate the lipped plate design.



Type U, UL & UM BOP Ram - Optional Ram Wear Pads*

Bore Size andWorking Pressure

LeftPart Number

Qty.Per Assembly

RightPart Number

Qty.Per Assembly

ScrewPart Number

Qty.Per Assembly

7-1/16" 3000 -15,000 2010071-02 2 Both Pads Included --- --- ---11" 3000 - 10,000 2011278-01 2 Both Pads Included 644349-03 211" 15,000 --- --- --- --- --- ---13-5/8" 3000 - 10,000 2011277-01 1 2011277-02 1 644349-01 413-5/8" 15,000 644348-04 2 Both Pads Included --- 644349-01 416-3/4" 10,000 2011281-03 1 2011281-04 1 644349-02 218-3/4" 10,000 2011280-01 1 2011280-02 1 2010506-01 220-3/4" 3000 2011281-05 1 2011281-06 1 644349-02 221-1/4" 2000 2011281-05 1 2011281-06 1 644349-02 221-1/4" 5000 - 10,000 2231763-01 1 2231764-01 1 644349-01 4

*Note: Ram Block Modification is required to enable the addition of the optional ram wear pads.

Hydraulic Bonnet Bolt System

The hydraulic bonnet bolt tensioner eliminates frictional and torsional loads and reducesthe time required for making up and breaking out bonnet bolts.

The hydraulic bonnet bolt is completely interchangeable with conventionalbonnet bolts. It has a standard hexagonal head. An additional external threadmates with the internal threads in the operating head of the hydraulicbonnet bolt tensioner. The hydraulic bonnet bolt has its operating rodpermanently secured in the machined hole in the center of the bolt.

The hydraulic bonnet bolt tensioner consists of a compact tensioner unit witha remote pump.

Hydraulic Bonnet Bolt and Tensioner Part Numbers

BOP Size and Working Pressure(psi) Bonnet Bolt Compact Tensioner Unit

11 15,000 All 049795-13-10 614644-13-10*13-5/8 5000 Pipe Ram 049795-13-05 614644-13-05*13-5/8 5000 Shear Ram 049917-13-05 614644-13-05*13-5/8 10,000 Pipe Ram 049795-13-10 614644-13-10*13-5/8 10,000 Shear Ram 049917-13-10 614644-13-10*13-5/8 15,000 All 049795-13-15 614644-16-10**16-3/4 5000 Pipe Ram 049795-16-05 614644-16-05**16-3/4 5000 Shear Ram 049917-16-05 614644-16-05**16-3/4 10,000 All 049795-16-10 614644-16-10**18-3/4 10,000 All 049795-18-10 614644-18-10**21-1/4 5000 All 049795-21-05 614644-18-10**

*Use 25,000 psi WP pump, part number 645035-01**Use 30,000 psi WP pump, part number 645035-02

Bonnet Seals and Connecting Rod Seals

For applications where only bonnet and/or connecting rod seals are required,Cameron offers individually packaged components. Connecting rod seals are nitrilerubber. Bonnet seals beginning with 644197 are the newest design.

When high temperature and/or high concentrations of H2S are expected, Cameronrecommends the use of CAMLAST bonnet and connecting rod seals along withCAMRAM 350 packers and top seals.

U BOP CAMLAST Bonnet and Connecting Rod Seals

BOPSize

Pressure Rating(psi)

Nitrile CAMLASTBonnet Seal Conn. Rod Seal Bonnet Seal Conn. Rod Seal

7-1/16 3000, 5000, 10,000and 15,000 644197-01-00-01 212741-37-00-01 644573-01-00-01 645077-37-00-01

11 3000, 5000 and 10,000 644197-02-00-01 212741-38-00-01 644573-02-00-01 645077-38-00-0111 15,000 Model 79 049272-03 212741-38-00-01 644898-01 645077-38-00-0113-5/8 3000, 5000 and 10,000 644197-03-00-01 212741-36-00-01 644573-03-00-01 645077-36-00-0113-5/8 15,000 644196-01-00-01 212741-36-00-01 644898-02-00-01 645077-36-00-0116-3/4 3000 and 5000 Model B 644197-04-00-01 212741-44-00-01 644573-04 645077-4416-3/4 10,000 Model II 644197-04-00-01 212741-44-00-01 644573-04 645077-4418-3/4 10,000 644197-05-00-01 212741-60 644573-05 645077-6020-3/4 3000 046613-16-00-01 212741-36-00-01 046613-26-00-01 645077-36-00-0121-1/4 2000 046613-16-00-01 212741-36-00-01 046613-26-00-01 645077-36-00-0121-1/4 5000 and 10,000 Model 79 644197-08-00-01 011741-58 644573-08-00-01 ---21-1/4 7500 and 10,000 Model II 644197-07 011741-58 644573-07 645077-36-00-0126-3/4 2000 and 3000 644197-09-00-01 212741-36-00-01 644573-09-00-01 645077-36-00-01




Bonnet Seal Carriers for U, UM and U II BOPs

The bonnet seal carrier is a bore-type sealing assembly which replaces the face sealused as the previous bonnet seal. Sealing capability is not dependant upon bonnetbolt torque. One seal is captured in a machined bore in the BOP body while theother seal is captured in a machined bore in the intermediate flange.

The seal carrier was designed, developed and performance-verified for use in newlymanufactured BOPs or as a replacement seal assembly for BOPs where either theBOP body or the intermediate flange requires weld repair on the sealing surfaces.

Part Numbers for Bonnet Seal Carriers for U, UM and U II BOPs

BOPType

BOPSize

Seal Carrier Retainer Ring Bonnet SealsQty. Part Number Qty. Part Number Qty. Part Number

U, UM11

3000, 5000 and10,000 psi

2 645464-02-00-01 2 702645-27-61 4 645484-02-00-01

U, UM 13-5/810,000 psi 2 645507-01-00-02 2 702645-27-91 4 645509-01-00-01

U, UM 13-5/815,000 psi 2 2010145-01 2 702645-27-71 4 2010146-01

U, UM 18-3/410,000 psi 2 2010185-01 2 702645-28-31 4 2010184-01

U II18-3/4

10,000 and15,000 psi

2 645464-01-00-02 2 645485-01-00-01 4 645484-01-00-01

cameron - type u bop.pdf

Documents