1

RODRIGO SALGADO, Ph.D., P.E., D.GE., F. ASCE PROFESSOR OF CIVIL ENGINEERING

PURDUE UNIVERSITY http://www.ecn.purdue.edu/~rodrigo/

I. Degrees Ph.D. in Civil Engineering, University of California, Berkeley, 1993 (advised by J.K. Mitchell) M.S. in Civil Engineering, University of California, Berkeley, 1990 Engenheiro Civil, Universidade Federal do Rio Grande do Sul (UFRGS), 1986

II. Positions at Purdue Professor of Civil Engineering, Purdue University 2003-present Associate Professor of Civil Engineering 1999-03 Assistant Professor of Civil Engineering, Purdue University 1993-99

III. Positions at Other Institutions or Organizations Visiting Professor, Southeast University, China 2011 Visiting Academic, University of Western Australia 2000 Visiting Associate Professor, University of Newcastle, Australia 2000 Visiting Fellow, Politécnico di Torino, Turin, Italy 1993 Graduate Student Researcher (GSR), UC Berkeley 1990-93 Research Assistant (RA), Case Western Reserve University 1988-89 Production Engineer, PETROBRÁS Petróleos Brasileiros S. A. 1986-88 Foundation Engineering Intern, Geyer Estaqueamento Ltda. 1984-86

IV. Honors and Awards Diplomate, Academy of Geoprofessionals, ASCE, 2012 Southeast University Fellow, Southeast University, China, 2011 Fellow, ASCE, 2011 Invited Participant, NAE U.S.-China Frontiers of Engineering Program, 2009 Invited Paper to the 60th Anniversary Issue of Geotechnique Excellent Contributions Award, IACMAG, 2008 Invited Participant, NAE Frontiers of Engineering Program, 2005 Shamsher Prakash Research Award, 2005 ASCE Walter L. Huber Research Prize, 2004 Gledden Senior Fellowship, University of Western Australia, 2000 ASCE Arthur Casagrande Professional Development Award, 1999 National Science Foundation Research Initiation Award, 1994 Brazilian Research Council Ph.D. Fellowship, 1990-93. One national award per year for geotechnical engineering Parker-Trask Graduate Fellowship, University of California, Berkeley, 1989-90

V. Professional Licenses State of Florida, P.E. License No. 72073 Conselho Regional de Engenheiros e Arquitetos, CREA, P.E., Rio Grande do Sul, Brazil

2

VI. Memberships in Academic, Professional and Scholarly Societies American Society of Civil Engineers (ASCE), Fellow, 1991-present Associação Brasileira de Mecânica dos Solos (ABMS), 1994-present Berkeley Geotechnical Society, 1989-present British Geotechnical Society (BGS), 1994-present Deep Foundations Institute, 2003-present International Association for Computer Methods in Geomechanics, 1998-present International Association of Foundation Drilling (ADSC), 1992-present International Society of Rock Mechanics (ISRM), 1994-present International Society of Soil Mechanics and Geotechnical Engineering, 1991-present Sigma Xi, 1996-present

VII. Editorial and Review Services (Past and Current) I have contributed as an Editor and reviewer for the top journals in my major field and related fields. I am invited on a regular basis to review promotion cases and theses internationally. I was invited by Israel’s Minister of Education to be a member of a committee of six Professors in charge of assessing all Civil Engineering programs in Israel in 2011.

Journal Editorial Work Editor of the ASCE Journal of Geotechnical and Geoenvironmental Engineering ICE Geotechnical Engineering, Editorial Advisory Board member ASCE International Journal of Geomechanics, Editorial Board member Computers and Geotechnics, Editorial Board member Soils and Rocks, Editorial Board member Geomechanics and Geoengineering: An International Journal, Editorial Board member

Promotion Cases Multiple American, Canadian, European, Middle-Eastern and Asian universities

External Theses Reviews University of São Paulo, São Carlos, Brazil, Juliana Lukiantchuki: Interpretation of SPT results

with basis on dynamic instrumentation, advised by Edmundo Esquível. (2012) Nanyang Technological University, Chan Chin Loong: Reliability assessment of laterally loaded

piles (2011) University College Dublin, David Igoe, Offshore Foundations: A comparison of full-

displacement and partial-displacement piles in sand, advised by Kenneth Gavin (2010) University of Western Australia, Xiangtao Xu, Base resistance of pipe piles in sand, advised by

Barry Lehane (2008) University of British Columbia, Christopher R. Daniel, Energy transfer and grain size effects

during the standard penetration test (SPT) and large penetration test (LPT), advised by John Howie (2007)

Dalhousie University, Xianyue Zhang, advised by Gordon Fenton (2007) Federal University of Rio Grande do Sul (2006), advised by Nilo Consoli and Fernando Schanaid. University of Newcastle (2000), advised by Hai-Sui Yu.

3

Review of Civil Engineering Programs Member of 6-person external review committee of Israeli universities set up by the Council of Higher Education of Israel (2011). We collectively visited each university in Israel with a civil engineering program and wrote a report to the Minister of Education of Israel on Civil Engineering Programs in that country, with evaluations and recommendations for improvement.

Research Proposals National Science Foundation, several Engineering and Physical Sciences Research Council (EPSRC), several Fulbright, twice Deutsche Forschungsgemeinschaft Colorado DOT FHWA-INDOT JTRP

VIII. Conference Organization 14th Pan-American Conference on Soil Mechanics and Geotechnical Engineering (Technical

Program Committee) ASCE-GI GeoFlorida 2010 (Chair of Technical Program and Keynote Lectures) Great Lakes Conference, 1994

IX. Technical Committees Core member of International Society of Soil Mechanics and Geotechnical Engineering TC 212 -

Deep Foundations – ISSMGE representative Core member of International Society of Soil Mechanics and Geotechnical Engineering TC 205 –

Limit States Design – U.S. representative GeoInstitute – Computational Geotechnics American Concrete Institute (ACI): committee no. 336, "Footings, Mats and Drilled Piers"

Brazilian Society of Soil Mechanics (ABMS): "In-situ Testing" committee, expired American Society of Agricultural Engineers (ASAE): Shallow Post Foundation Design

Committee (2011).

X. Teaching I enjoy helping students learn a discipline at its current state of development. I have developed 13 courses during my 19-year career at Purdue University, including a multi-disciplinary study-abroad course in Brazil on energy and transportation infrastructure taken by a diverse group of students with technical visits to oil company operations, construction sites for large ports, dams, subways and ethanol plants and a plasticity theory course that is taken by students from across the College of Engineering. In my teaching, I seek ways to involve students through active engagement during class. When teaching programming, for example, I emphasize collaborative, team coding. There is a repository for the class to which students commit code and are able to see and react to code written by classmates, even during class. In general, I often make use of problems that the class solves together or in small groups during lecture time. I have found this to be more effective and more fun than one-directional lecture-type teaching.

4

Courses Taught at Purdue

Courses Developed and Taught at Purdue

CE383 Geotechnical Engineering I CE483 Geotechnical Engineering II CE580 Advanced Geotechnical Engineering CE585 Dams CE587 Soil Dynamics CE597 Piling Engineering CE680 Theoretical Soil Mechanics CE683 Advanced Foundation Engineering CE687 Earthquake Geotechnical Engineering CE689 Plasticity Theory CE697 Special Foundations CE 597 Programming Numerical Methods SA10511 Energy & Transportation Infrastructure & Sustainable Construction Practices in Brazil (the Google+ page for this course is https://plus.google.com/117647761151137590110/posts)

Courses Taught in the Last Ten Years

Semester/Year

Course No.

Course Title Credit Hours

Percent Responsibility

S02 CE683 Advanced Foundation Engineering 3 100 % F02 CE580 Advanced Geotechnical Engineering 3 100 % F02 CE483 Geotechnical Engineering II 3 100 % S03 CE683 Advanced Foundation Engineering 3 100 % F03 CE689 Plasticity Theory 3 100% F04 CE483 Geotechnical Engineering II 3 100 % S04 CE683 Advanced Foundation Engineering 3 100 % F05 CE697 Special Topics in Foundation Engineering 3 100% S05 CE687 Earthquake Geotechnical Engineering 3 100 % S06 CE689 Plasticity Theory 3 100% F07 CE689 Plasticity Theory 3 100% F08 CE383 Geotechnical Engineering I 3 100% S09 CE597 Piling Engineering 3 100% F09 CE 483 Geotechnical Engineering II 3 100% S10 CE 383 Geotechnical Engineering I 3 65% F10 CE 483 Geotechnical Engineering II 3 100% F10 CE 689 Plasticity Theory 3 100% S11 CE 597 Piling Engineering 3 100% F11 CE 483 Geotechnical Engineering II 3 100% S12 CE 597 Programming Numerical Methods 3 100% S12 SA10511 Energy & Transportation Infrastructure in Brazil 3 50% F12 CE 689 Plasticity Theory 3 100% F12 CE 483 Geotechnical Engineering II 3 100%

5

Theses and Dissertations Underway

Name ExpectedDegree

Title

Mazhar Iqbal Arshad Ph.D. DIC Study of Displacement Fields Around Penetrometers

Hobi Kim (co-chair) Ph.D. Modeling of Dynamic Penetration Resistance in Unsaturated Soils

Jeehee Lim Ph.D. Development of Mesh-free Numerical Algorithms for the Solution of Elasto-Plastic BVPs

Faraz Tehrani Ph.D. Deflections of Pile Groups Sang Inn Woo Ph.D. Simulation of Pile Installation using Finite Element

Analysis Yanbei Zhang (co-chair) Ph.D. Continuum Mechanics-Based Analysis of Pile

Driving Eshan Ganju (co-chair) M.S. Dynamic Cone Penetration Farhan Rahman (co-chair) M.S. Random Field Modeling Applied to Assessment of

Site Variability

6

Completed Theses and Dissertations

Date Name Degree Title 12/09 Tanusree Chakraborty Ph.D. A Method for Accounting for Pile Setup and Relaxation in

Pile Design and Quality Assurance 12/08 Aurva Kapoor M.S. A Method of Analysis of Single Piles and Pile Groups

Subjected to Combined Loads 8/08 Dongwook Kim Ph.D. LRFD of Slopes and Retaining Structures 5/08 Taehoon Koh Ph.D. Development of a Constitutive Model for Tire Shreds

mixed with Bottom Ash 12/06 Grace Abou-Jaoude Ph.D. A Method of Analysis of Single Piles and Pile Groups

Subjected to Combined Loads 12/06 Dipanjan Basu Ph.D. Analysis and Design of Laterally Loaded Piles 05/06 Dimitrios Loukidis Ph.D. Advanced Constitutive Modeling of Sands and

Applications to Foundation Engineering 05/06 Tejas Murthy Ph.D. Study of the Undrained Static Behavior of Sandy Soils in

the Critical State Framework 05/06 Sungmin Yoon Ph.D. Mechanical Response of Tire Shred-Sand Mixtures and

Applications to Geotechnical Structures 2005 Kwangkyun Kim Ph.D. Cone Penetration Test in Clayey Soil: Rate Effect and

Application to Pile Shaft Resistance calculations 2005 Kevin Foye Ph.D. Reliability Analysis and LRFD of Foundations 2005 Jie Zhang Ph.D. Cavity Expansion and Penetration Resistance in Cemented

Sands 5/04 Antonio Carraro Ph.D. Mechanical Behavior of Silty and Clayey Sands 12/03 Paola Bandini Ph.D. Applications of Limit Analysis to Stability Problems in

Geotechnical Engineering 5/03 Bumjoo Kim Ph.D. Behavior of Fly and Bottom Ash Embankments 12/02 Bryan Scott Ph.D. Limit States Design of Shallow Foundations 8/02 Daehyeon Kim Ph.D. Effects of Super Single Tire Loadings on Road Pavements 5/99 Junhwan Lee Ph.D. Response of Foundations in Sand from CPT Results 8/98 Jongmin Kim Ph.D. Limit Analysis of Soil Slope Stability Using Finite

Elements and Linear Programming 5/97 Ahmed Karim Ph.D. Building Highway Embankments of Fly/Bottom Ash

Mixtures 12/96 Kwanho Lee Ph.D. The Use of Waste Materials (Air-Cooled Furnace Slag and

Pyrolized Carbon Black) in Hot Mix Asphalt 8/96 Andres Bernal Ph.D. Laboratory Study on the Use of Tire Shreds and Rubber-

Sand in Backfills and Reinforced Soil Applications 12/02 Tejas Murthy M.S. Critical State of Silty Sands 12/00 Dimitrios Loukidis M.S. Seismic Response of Pile Foundations 5/99 Paola Bandini M.S. Static Response and Liquefaction Resistance of Silty Sand 12/98 Xiaodong Luo M.S. Dynamic Cone Penetration for Assessment of Subgrade

Soil Suitability

7

Undergraduate Special Projects Directed

Current Students

Luiz Eduardo Martins Bergmann, Science without Borders Program Paulo Ernani Mendonça Silva, Science without Borders Program

Former Students

Francisco Bonachera Martin worked on pile group analysis. Joong Hee Min, John Zuleger and Surya K. M. Chinnamani on compaction quality control. James Cramer and Rachel McKenzie worked on pile analysis for an NSF project. Adythia Soendjojo worked on experimental research involving piles.

James Brown worked on soil and coal ash compaction. Ryan Hebbe worked on an NSF project on liquefaction of sands. Bryan Scott worked on laboratory testing of silty sands.

Hong Wei Chee worked on laboratory testing of silty sands. Arjun Sondhi (summer intern from India) worked on grain size studies. Blake Holaday worked on a project on reutilization of tire shreds.

8

XI. RESEARCH My research has been very much influenced by a desire to understand the science underlying every problem that I have studied, to develop rigorous and realistic solutions to these problems, and to make the solutions accessible in engineering practice. In the process, I have done work of experimental, analytical and numerical nature at the cutting edge. Most of my research is currently devoted to problems in energy and transportation infrastructure and computational mechanics. Two current interests that are leading to important developments are semi-analytical solutions for foundation engineering problems that so far could only be analyzed realistically using costly FEM analyses and combined meshless-meshed domain numerical analyses. My research on the bearing capacity of piles, particularly the work on base resistance, which forms the basis for calculation of the base resistance of the open-ended pipe piles used in offshore piling, and the papers on testing of open-ended pipe piles are widely referenced and have been used to shape and validate components of methods proposed to design piles for offshore structures. My research on interpretation of the results of cone penetration tests, the main method of geotechnical investigation for offshore applications, is equally widely referred to and used in practice. I have continued to expand my activities related to offshore foundations, doing research on the installation and design of torpedo piles (dynamically penetrating anchors) in cooperation with UENF and UFRGS in Brazil, with funding from the Brazilian Research Council and PETROBRÁS. My work is often cited and used by practicing engineers and academics alike throughout the world. My current h-index is 18 based on over 90 Scopus publications and 25 according to the Google citations service. My i10 index according to Google is 43, demonstrating that many of my papers receive a substantial number of citations. My students with an interest in pursuing academic careers have been able to secure excellent positions in the U.S., Canada, Australia, Europe and Asia and have become contributors to geotechnical engineering knowledge. Awards received and invitations to deliver keynote lectures and participate in exclusive workshops recognize the contributions that I have consistently made over the course of my career. Full Google publication citation profile: http://scholar.google.com/citations?user=-uAPHHgAAAAJ&hl=en

Ph.D. Students

Current

Faraz Tehrani Sang Inn Woo Mazhar Iqbal Arshad Yanbei Zhang Farhan Rahman Jeehee Lim Hobi Kim Eshan Ganju

9

Alumni

Name Year Current Position Tanusree Chakraborty 2009 Assistant Professor, IIT New Delhi Dongwook Kim 2008 Research Engineer, Korea Inst. Construction Tech. Taehoon Koh 2008 Scientist, Railway Research Institute, South Korea Grace Abou-Jauode 2007 Assistant Professor, Notre Dame University, Lebanon Dipanjan Basu 2007 Assistant Professor, University of Waterloo Dimitrious Loukidis 2006 Assistant Professor, Cyprus University, Cyprus Sungmin Yoon 2006 Research Engineer, Lousiana State University

Tejas Murthy 2006 Assistant Professor, Indian Institute of Science Kwangkyun Kim 2005 Project Engineer, Samsung Construction Kevin Foye 2005 Senior Staff Engineer, CTI and Associates, Inc. Jie Zhang 2005 Formerly Assistant Prof., New Mexico State University Antonio Carraro 2004 Professor, University of Western Australia Paola Bandini 2003 Associate Professor, New Mexico State University Bumjoo Kim 2003 Associate Professor, Dongguk University, Korea Bryan Scott 2002 Staff Engineer, Thelen Associates, Inc. Daehyeon Kim 2001 Associate Professor

Junhwan Lee 1999 Professor, Yonsei University Jongmin Kim 1998 Professor, Sejong University Ahmed Karim 1998 Consultant, Egypt Kwanho Lee 1996 Professor, Kyungsung Univ., Korea

Thesis M.S. Students

Current

Eshan Ganju Farhan Rahman

Alumni

Name Year Aurva Kapoor 2008 Tejas Murthy 2002 Dimitrios Loukidis 2000 Paola Bandini 1999 Xiaodong Luo 1998

Visiting Faculty and Scholars Dr. H.S. Yu, Senior Lecturer, University of Newcastle, Newcastle, Australia. Research on upper and lower bound analysis of slopes when Dr. Yu visited Purdue University (1995). Dr. Mike Riemer, Adjunct Professor, U.C. Berkeley. Laboratory measurement of shear wave velocities in soil (1996). Dr. Ahmed Karim, Egypt, Post-Doctoral Associate. Triaxial and bender element testing of silty sand (1997). Dr. Jongmin Kim, Korea, Post-Doctoral Associate. Stability analysis of soil slopes (1998). Dr. Cassia Galvão, Brazil, Visiting Scholar. Bender element testing (July, 1999). Dr. Junhwan Lee, Research Associate. CPT studies (1999-2001). Prof. Kyuho Paik, Korea, Visiting Scholar. Studies on bearing capacity and load-response of pipe

piles (2000-01).

10

Prof. Woojin Lee, Korea, Visiting Scholar (3/02-3/03). Use of fiber optics sensors to assess load transfer in piles.

Prof. Kentaro Yamamoto, Japan, Visiting Scholar (3/02-3/03). Stability analysis of eccentrically loaded footings.

Dr. Marcelo Rigo, Brazil, Visiting Scholar (3/03-9/03). Behavior of structured Brazilian soils. Dr. Won-Je Lee, Korea, Visiting Scholar (7/03-12/04). Set-up effects in piles. Dr. Andrei Lyamin, University of Newcastle, Australia (2004 and 2007). Limit analysis of

foundations. Prof. Dimitrios Loukidis, computational plasticity, 2007 Prof. Adriano Bica, Federal University of Rio Grande do Sul. Residual soils, 2007 Prof. Dipanjan Basu, laterally loaded pile analysis and LRFD of piles, 2008. Dr. Dongwook Kim, LRFD of slopes and retaining structures, 2009. Prof. Tingkai Nian, Dalian University of Technology, China, 12/09-12/10. Limit analysis. Wei Fan, China University of Geosciences, China, 01/11-01/12. Cheng Min, Hebei Engineering University, China, 9/10-9/11. Prof. Guoliang Dai, Southeast University, Nanjing, China, 11/10-11/11. Deep foundations. Prof. Xiaoyan Zhao, Southwest Jiaotong University, China, 6/10-12/11. Slope stability,

centrifuge testing. Dr. Feng Shi, Fujian Academy of Building Research, 2012. Piling engineering. Dr. Duguo Wang, China Earthquake Administration, China, 04/12-04/13. 3D site response

analysis. Dr. Weili Zhang, China University of Geosciences, 06/12-06/13. Foundation anchoring. Dr. Caihua Shen, Hohai University, China, 06/12-06/13. Prof. Minyun Hu, Zhejiang University of Technology, 08/12-08/13. DEM. Prof. Pokharel, Mountain State University, 8/12-6/13. Constitutive modeling and

DEM. Song Zhu, Tongji University, 10/12 – 10/13. Super long piles.

11

Grants and Contracts Notes:

1. JTRP is the Joint Transportation Research Program (JTRP) of Purdue University. 2. FHWA = Federal Highway Administration; INDOT = Indiana Department of Transportation; NSF = National Science

Foundation; PGI = Purdue Global Initiatives; PRF = Purdue Research Foundation, KRRI = Korea Railroad Research Institute

Title: Cone Penetration Test for Soil State Determination and Geotechnical Design Sponsor: PRF Role: PI Starting Date: 8/94 Ending Date: 7/ 96 Amount: $20,400 Title: Building Embankments of Fly/Bottom Ash Mixtures Sponsor: JTRP (FHWA-INDOT) Role: PI Starting Date: 8/94 Ending Date: 12/96 Amount: $65,400 Title: Liquefaction Potential Assessment Using the Seismic Cone Penetrometer Sponsor: NSF Role: PI Starting Date: 10/94 Ending Date: 9/97 Amount: $99,978 Title: Limit Analysis of Slopes Sponsor: PGI Role: PI Starting Date: 1/95 Ending Date: 6/95 Amount: $2,500 Title: CPT for Subgrade Soil Suitability Assessment Sponsor: JTRP (FHWA-INDOT) Role: PI Starting Date: 1/96 Ending Date: 5/98 Amount: $85,006 Title: CPT for Pile Analysis and Design Sponsor: JTRP (FHWA-INDOT)1 Role: PI Starting Date: 8/96 Ending Date: 12/98 Amount: $80,000

12

Title: 3-D Effective Stress Limit Analysis of Soil Slopes Sponsor: PRF Role: PI Starting Date: 8/97 Ending Date: 7/99 Amount: $21,000 Title: An Integrated System for the Simulation of Analysis of Soil-Structure-Water Interaction Under Earthquake Loadings Sponsor: INTEL Role: Co-PI (with Chen and Sotelino) Starting Date: 8/97 Ending Date: 7/00 Amount: $65,806 Title: Limit States Design of Foundations Sponsor: JTRP (FHWA-INDOT) Role: PI Starting Date: 8/99 Ending Date: 7/02 Amount: $160,000 Title: Subgrade Response to Super Tire Loadings Sponsor: JTRP (FHWA-INDOT) Role: PI Starting Date: 8/99 Ending Date: 7/02 Amount: $100,000

Title: Pile Damage Potential During Earthquakes Sponsor: JTRP (FHWA-INDOT) Role: PI (with A. Bobet) Starting Date: 8/99 Ending Date: 7/00 Amount: $25,000 Title: Pile Load Tests for Development of CPT-Based Pile Design Method Sponsor: JTRP (FHWA-INDOT) Role: PI Starting Date: 3/00 Ending Date: 7/00 Amount: $28,146 Title: Construction of Tire-Shred Embankment Sponsor: JTRP (FHWA-INDOT) Role: PI Starting Date: 6/00 Ending Date: 12/02 Amount: $37,935

13

Title: Cone Penetrometer (CPT) Training Sponsor: JTRP (FHWA-INDOT) Role: PI Starting Date: 3/00 Ending Date: 12/00 Amount: $10,000 Title: DCPT for Subgrade Assessment Sponsor: JTRP (FHWA-INDOT) Role: PI Starting Date: 1/00 Ending Date: 12/00 Amount: $29,525 Title: Load Response of Non-Textbook Soils Sponsor: PRF Role: PI Starting Date: 5/02 Ending Date: 1/03 Amount: $26,140 Title: Determination of Ash Mixture Properties and Construction of Test Embankment Sponsor: IN Dept Comm / JTRP Role: PI Starting Date: 7/01 Ending Date: 5/03 Amount: $161,894 Title: Analysis of Laterally Loaded Piles Sponsor: JTRP (FHWA-INDOT) Role: Starting Date: 5/02 Ending Date: 12/07 Amount: $154,983 Title: LRFD of Slopes and Retaining Structures Sponsor: JTRP (FHWA-INDOT) Role: PI Starting Date: 5/02 Ending Date: 8/07 Amount: $159,515 Title: Assessment of INDOT pile design methods Sponsor: JTRP (FHWA-INDOT) Role: PI Starting Date: 12/03 Ending Date: 12/06 Amount: $160,000

14

Title: Tire-Shred Backfill in MSE Wall Applications Sponsor: JTRP (FHWA-INDOT) Role: Co-PI (with Monica Prezzi) Starting Date: 1/04 Ending Date: 10/08 Amount: $95,000 Title: Initiative for Formulating a Long-Range Research Plan for INDOT Sponsor: JTRP (FHWA-INDOT) Role: PI Starting Date: Ending Date: Amount: $8,000 Title: Assessment of Axially-Loaded Pile Dynamic Design Methods and Review of INDOT Axially-Loaded Pile Design Methods Sponsor: JTRP (FHWA-INDOT) Role: PI Starting Date: 1/05 Ending Date: 6/08 Amount: $200,000 Title: A Method for Accounting for Pile Setup and Relaxation in Pile Design and Quality Assurance Sponsor: JTRP (FHWA-INDOT) Role: PI Starting Date: 1/06 Ending Date: 6/09 Amount: $100,000 Title: Use of DCP and Clegg Hammer Tests for Quality Control of Roadway Compaction Sponsor: JTRP (FHWA-INDOT) Role: Co-PI (with Monica Prezzi) Starting Date: 1/06 Ending Date: 6/08 Amount: $98,936 Title: Research and Development of More Economical Mixtures of Tire Shreds and Sand Sponsor: IDEM Role: Co-PI (with Monica Prezzi) Starting Date: 5/04 Ending Date: 11/07 Amount: $50,000 Title: Design Planning and Implementation of CE Applications for Tire Shreds Sponsor: IDEM Role: Co-PI (with Monica Prezzi) Starting Date: 5/04 Ending Date: 11/07 Amount: $125,000

15

Title: Field Implementation of Compaction Techniques for Tire Shred-Granular Material Mixtures Sponsor: IDEM Role: PI Starting Date: 1/05 Ending Date: 12/08 Amount: $75,000 Title: Development of LRFD Framework for Foundation Design Sponsor: JTRP (FHWA-INDOT) Role: PI Starting Date: 1/07 Ending Date: 12/09 Amount: $150,000 Title: Development of a Constitutive Model for Tire Shreds Mixed with Bottom Ash Sponsor: KKRI Role: PI (with Monica Prezzi) Starting Date: 2/06 Ending Date: 8/06 Amount: $42,160 Title: Development of a Constitutive Model for Tire Shreds Mixed with Bottom Ash Sponsor: KKRI Role: PI (with Monica Prezzi) Starting Date: 9/06 Ending Date: 7/07 Amount: $51,918

Title: Development of a Constitutive Model for Tire Shreds Mixed with Bottom Ash Sponsor: KKRI Role: PI (with Monica Prezzi) Starting Date: 8/07 Ending Date: 5/08 Amount: $31,000 Title: A Novel Method of Analysis of Single Piles and Pile Groups Subjected to Lateral Loads Sponsor: NSF Role: PI (with Monica Prezzi) Starting Date: 7/06 Ending Date: 12/09 Amount: $315,000 Title: Development of SPT-T Technology Sponsor: JTRP (FHWA-INDOT) Role: PI (with Monica Prezzi) Starting Date: 1/09 Ending Date: 12/11 Amount: $198,947

16

Title: Implementation of Analysis of Laterally Loaded Piles in Multi-Layered Soils Sponsor: JTRP (FHWA-INDOT) Role: Co-PI (with Monica Prezzi) Starting Date: 6/08 Ending Date: 8/09 Amount: $63,898 Title: Assessment of the Performance of MSE Abutment Walls in Indiana Sponsor: JTRP (FHWA-INDOT) Role: Co-PI (with Monica Prezzi) Starting Date: 1/09 Ending Date: 12/11 Amount: $185,350 Title: Limit States and Load and Resistance Design of MSE Walls Sponsor: JTRP (FHWA-INDOT) Role: PI Starting Date: 9/09 Ending Date: 4/11 Amount: $45,000 Title: Limit States and Load and Resistance Design of Slopes Sponsor: JTRP (FHWA-INDOT) Role: PI Starting Date: 9/09 Ending Date: 4/11 Amount: $45,000 Title: Static Pile Resistance Calculation Methods Sponsor: JTRP (FHWA-INDOT) Role: PI Starting Date: 10/09 Ending Date: 5/11 Amount: $45,000 Title: Pile Drivability Methods Sponsor: JTRP (FHWA-INDOT) Role: PI Starting Date: 10/09 Ending Date: 5/11 Amount: $45,000 Title: Cost Reductions in INDOT Geotechnical Site Investigation and Design through the Development of SPT-Torque Test Shear Strength Correlations for Glacial Till Sponsor: JTRP (FHWA-INDOT) Role: PI Starting Date: 01/2009 Ending Date: 11/11 Amount: $198,947

17

Title: Assessment of the Performance of MSE Abutment Walls in Indiana. Sponsor: JTRP (FHWA-INDOT) Role: Co-PI Starting Date: 01/2010 Ending Date: 04/2012 Amount: $185,350 Title: Implementation of Limit States and Load Resistance Design of MSE Walls. Sponsor: JTRP (FHWA-INDOT) Role: PI Starting Date: 09/2009 Ending Date: 03/2011 Amount: $47,285 Title: Implementation of Limit States and Load Resistance Design of Slopes. Sponsor: JTRP (FHWA-INDOT) Role: PI Starting Date: 09/2009 Ending Date: 03/2011 Amount: $47,285 Title: Development of Site Investigation Technologies and Methods for Enhanced Quality Control and Cost-Effective Design Sponsor: JTRP (FHWA-INDOT) Role: Co-PI Starting Date: 01/2010 Ending Date: 01/2013 Amount: $240,000 Title: Pile Driving Analysis for Design and Quality Assurance Sponsor: JTRP (FHWA-INDOT) Role: PI Starting Date: 01/2010 Ending Date: 01/2013 Amount: $240,000 Title: Implementation of Pile Drivability Methods Sponsor: JTRP (FHWA-INDOT) Role: PI Starting Date: 05/2009 Ending Date: 11/2010 Amount: $46,650 Title: Implementation of Static Pile Resistance Calculation Methods Sponsor: JTRP (FHWA-INDOT) Role: PI Starting Date: 05/2009 Ending Date: 11/2010 Amount: $45,150

18

Title: Integrated Framework for the 3D Analysis of Soil Pile Interaction. Sponsor: NSF Role: Co-PI Starting Date: 05/2010 Ending Date: to 08/2013 Amount: $202,000 Title: LRFD of Bridge Foundations Accounting for Pile Group-Soil Interaction Sponsor: JTRP (FHWA-INDOT) Role: PI Starting Date: 08/2011 Ending Date: 08/2014 Amount: $400,000 Title: QA/QC of Subgrade and Embankment Construction – Technology Replacement and Updated Procedures Sponsor: JTRP (FHWA-INDOT) Role: co-PI Starting Date: 08/2011 Ending Date: 08/2013 Amount: $250,000

Title: Study Abroad and International Learning (SAIL) grant - “Energy and Transportation Infra-structure and Sustainable Construction Practices in Brazil” Sponsor: Purdue – International Programs Role: co-PI Starting Date: 08/2011 Ending Date: 08/2013 Amount: $7,000

Publications

Full Articles in Refereed Journals

1. Fretti, C., Lo Presti, D., and Salgado, R. (1993). "The research dilatometer: In-situ and calibration test results." Rivista Italiana di Geotecnica, XXVI(4), 237-243.

2. Sitar, N. and Salgado, R. (1994). "Behavior of Young Bay mud from the Marina District of San Francisco under static and cyclic simple shear." Loma Prieta Professional Paper 1551-A, U.S. Geological Survey, A145-A153.

3. Salgado, R., Mitchell, J.K., and Jamiolkowski, M. (1997). "Cavity expansion and penetration resistance in sand." Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 123(4), 344-354.

4. Salgado, R., Drnevich, V.P., Ashmawy, A., Grant, P., and Vallenas, P. (1997). "Interpretation of large-strain crosshole tests." Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 123(4), 382-388.

5. Salgado, R., Boulanger, R. and Mitchell, J.K. (1997). "Lateral stress effects on CPT liquefaction resistance correlations." Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 123(8), 726-735.

19

6. Park, T., Lee, K.H., Salgado, R., Lovell, C.W. and Coree, B. (1997). "Use of pyrolized carbon black as an additive in hot-mix asphalt." Journal of Transportation Engineering, ASCE, 123(6), 489-494.

7. Bernal, A., Salgado, R., Swan, R., Jr. and Lovell, C.W. (1997). "Interaction between tire shreds, rubber-sand and geosynthetics." Geosynthetics International, 4(6), 623-643.

8. Yu, H.S., Salgado, R., Sloan, S. and Kim, J. (1998). "Limit analysis vs. limit equilibrium for slope stability assessment." Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 124(1), 1-11 (35th most cited paper in this journal according to Scopus).

9. Salgado, R., Mitchell, J.K., and Jamiolkowski, M. (1998). "Calibration chamber size effects on penetration resistance in sand." Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 124 (9), 878-888.

10. Salgado, R., Jamiolkowski, M. and Mitchell, J.K. (1998). "Penetration resistance in sands: Analysis and applications to liquefaction potential assessment and estimation of pile base resistance." Rivista Italiana di Geotecnica, XXXII(4), 5-17.

11. Kim, J., Salgado, R. and Yu, H.S. (1999). "Limit analysis of soil slopes subjected to porewater pressures." Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 125(1), 49-58.

12. Lee, J., Salgado, R., Bernal, A., and Lovell, C.W. (1999). "Tire shreds and rubber sand as lightweight backfill material." Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 125(2), 132-141 (16th most cited paper in this journal according to Scopus).

13. Lee, J. and Salgado, R. (1999). "Determination of pile base resistance in sands." Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 125(8), 673-683.

14. Yu, H.S., Salgado, R., Sloan, S. and Kim, J. (1999). Closure to "Limit analysis vs. limit equilibrium for slope stability assessment." Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 125(10), 915-918.

15. Salgado, R., Bandini, P. and Karim, A. (2000). "Shear strength and stiffness of silty sands." Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 126(5), 451-462 (19th most cited paper in this journal according to Scopus).

16. Lee, J. and Salgado, R. (2000). "Analysis of calibration chamber plate load testing." Canadian Geotechnical Journal, 37(1), 14-25.

17. Salgado, R., Mitchell, J.K., and Jamiolkowski, M. (2001). Closure to "Calibration chamber size effects on penetration resistance in sand." Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 127(7), 629-630.

18. Salgado, R. and Randolph, M.F. (2001). "Analysis of cavity expansion in sand." International Journal of Geomechanics, 1(2), 175-192.

19. Lee, J., Salgado, R., Karim, A. and Lovell, C.W. (2001). "Compaction and shear strength of fly and bottom ash mixtures." Journal of Solid Waste Technology and Management, 27(3), 137-145.

20. Lee, K., Cho, J., Salgado, R. and Lee, I. (2001). "Retaining wall model test with foundry sand mixture backfill." Geotechnical Testing Journal, ASTM, 2(4), 401-408.

21. Kim, J., Salgado, R. and Lee, J. (2002). "Limit analysis of complex soil slopes." Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 128(7), 546-557.

22. Lee, J. and Salgado, R. (2002). "The estimation of the settlement of footings in sand." International Journal of Geomechanics, 1(2), 175-192.

23. Lee, K., Salgado, R., Jeon, W. and Kim, N. (2002). "Engineering properties of wastewater treatment sludge modified by hydrated lime and fly ash." Journal of Solid Waste Technology and Management, 28(3), 145-153.

24. Paik, K. and Salgado, R. (2003). "Determination of bearing capacity of open-ended piles in sand." Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 129(1), 46-57.

25. Lee, K., Yoon, Y., Cho, J., Salgado, R., Lee, I., and Kim, N. (2002). "Engineering properties of waste foundry sand mixtures as controlled low strength materials." Journal of Solid Waste Technology and Management, 28(4), 190-199.

20

26. Scott, B., Kim, B. and Salgado, R. (2003). "Evaluation of load factors for use in geotechnical design." Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 129(4), 287-295.

27. Paik, K., Salgado, R. Lee, J and Kim, B. (2003). "Behavior of open- and closed-ended piles driven into sands." Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 129(4), 296-306.

28. Lee, J., Salgado, R. and Paik, K. (2003). "Estimation of load capacity of pipe piles in sand based on CPT results." Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 129(5), 391-403.

29. Carraro, J. A., Bandini, P. and Salgado, R. (2003). "Evaluation of liquefaction resistance of clean and silty sands based on CPT cone penetration resistance." Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 129(12), 965-976.

30. Loukidis, D., Bandini, P. and Salgado, R. (2003). "Comparative study of limit equilibrium, limit analysis and finite element analysis of the seismic stability of slopes." Geotechnique 53(5), 463-479.

31. Paik, K. and Salgado, R. (2003). "Estimation of active earth pressure against rigid retaining walls considering arching effects." Geotechnique, 53(7), 643-653.

32. Paik, K. and Salgado, R. (2004). "Effect of pile installation method on pipe pile behavior in sands." Geotechnical Testing Journal, ASTM, 27(1), 11-22.

33. Lee, J., Salgado, R. and Carraro, J.A.H. (2004). "Stiffness degradation and shear strength of silty sands." Canadian Geotechnical Journal, NRC Research Press, 41(5), 831-843.

34. Lee, Woojin, Lee, Won-Je, Lee, Sang-Bae and Salgado, R. (2004). "Measurement of pile load transfer using fiber Bragg grating sensor system." Canadian Geotechnical Journal, 41(6), 1222-1232.

35. Paik, K. and Salgado, R. (2004). Closure to "Determination of bearing capacity of open-ended piles in sand." Journal of Geotechnical and Geoenvironmental Engineering, 130(6), 658-660.

36. Salgado, R. and Prezzi, M., (2004). "Construction of a tire-shred test embankment." Engineering Sustainability Journal, Proceedings of the Institution of Civil Engineers, 157(ES2), 65-66 (invited paper).

37. Zia, N., Kim, D. and Salgado, R. (2004). "Use of recycled and waste materials in Indiana." Transportation Research Record, Journal of the Transportation Research Board, Vol. 1874, TRB, December, 2004, 78-95.

38. Salgado, R., Lyamin, A., Sloan, S. and Yu, H.S. (2004). "Two- and three-dimensional bearing capacity of footings in clay." Geotechnique 54(5), 297-306.

39. Kim, B., Prezzi, M. and Salgado, R. (2005). "Geotechnical properties of fly and bottom ash mixtures for use in highway embankments." Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 131(7), 914-924.

40. Kim, D., Salgado, R. and Altschaeffl, A.G. (2005). "Effects of super-single tire loadings on pavements." Journal of Transportation Engineering, ASCE, 131(10), 732-743.

41. Lee, J. H. and Salgado, R. (2005). "Estimation of footing bearing capacity in sands based on CPT." Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 131(4), 442-452.

42. Lee, J. H., Salgado, R. and Kim, S. I. (2005). "Normalized bearing capacity of footings using state-dependent finite element analysis." Computers and Geotechnics, 32(7), 445-457.

43. Foye, K., Scott, B. and Salgado, R. (2006). "Assessment of variable uncertainties for reliability-based design of foundations." Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 132(9), 1197-1207.

44. Foye, K., Scott, B. and Salgado, R. (2006). "Resistance factors for use in shallow foundation LRFD." Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 132(9), 1208-1218.

45. Lee, J. H. and Salgado, R. (2006). Closure to "Estimation of footing bearing capacity in sands based on CPT." Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 132(11), 1515-1518.

21

46. Kim, B., Prezzi, M. and Salgado, R. (2007). Closure to "Geotechnical properties of fly and bottom ash mixtures for use in highway embankments." Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 133(7), 903.

47. Murthy, T., Loukidis, D., Carraro, A., Prezzi, M. and Salgado, R. (2007). "Undrained monotonic response of clean and silty sands." Geotechnique, 57(3), 273-288.

48. Salgado, R. and Prezzi, M. (2007), "Computation of cavity expansion pressure and penetration resistance in sands." International Journal of Geomechanics, ASCE, 7(4), 251-265.

49. Lyamin, A., Salgado, R., Sloan, S.W. and Prezzi, M. (2007). "Two- and three-dimensional bearing capacity of footings in sand." Geotechnique, 57(8), 647-662.

50. Basu, D. and Salgado, R. (2007). "Elastic analysis of laterally loaded pile in multi-layered soil." Geomechanics and Geoengineering: An International Journal, 2(3), 183-196.

51. Basu, D. and Salgado, R. (2007). "Method of initial parameters for piles embedded in layered soils." Geomechanics and Geoengineering: An International Journal, 2(4), 281-294.

52. Basu, D. and Salgado, R. (2008). "Analysis of laterally loaded piles with rectangular cross sections embedded in layered soil." International Journal for Numerical and Analytical Methods in Geomechanics, 32(7), 721-744.

53. Basu, D., Prezzi, M., Salgado, R. And Chakraborty, T. (2008). "Settlement analysis of piles with rectangular cross section in multi-layered soil." Computers and Geotechnics, 35, 563-575.

54. Lee, J., Eun, J., Prezzi, M. and Salgado, R. (2008). "Strain influence diagrams for settlement estimation of both isolated and multiple footings." Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 134(4), 417-427.

55. Kim, K., Prezzi, M., Salgado, R. and Lee, W. (2008). "Effect of penetration rate on cone penetration resistance in saturated clayey soils." Journal of Geotechnical and Geoenvironmental Engineering, 134(8), 1142-1153.

56. Loukidis, D. and Salgado, R. (2008). "Modeling sand response using two-surface plasticity." Computers and Geotechnics, 36, (1-2), pp. 166-186.

57. Loukidis, D., Chakraborty, T. and Salgado, R. (2008). "Bearing capacity of strip footings on purely frictional soil under eccentric and inclined loads." Canadian Geotechnical Journal, 45(6), 768-787.

58. Loukidis, D. and Salgado, R. (2008). "Analysis of the shaft resistance of nondisplacement piles in sand." Geotechnique, 58(4), 283–296.

59. Murthy, T. G., Loukidis, D., Carraro, J. A. H., Prezzi, M. and Salgado, R. (2008). Closure to "Undrained monotonic response of clean and silty sands." Geotechnique, 58(6), 536-538.

60. Salgado, R., Houlsby G.T. and Cathie, D. (2008). "Contributions to Foundation Engineering in Géotechnique: 1948 to 2007" – Invited paper to the 60th Anniversary issue of Geotechnique – Geotechnique, 58(5), 369-375.

61. Foye, K.C., Abou Jaoude, G., Prezzi, M. and Salgado, R. (2009). "Resistance factors for use in load and resistance factor design of driven pipe piles in sands." Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 135(1), 1-13.

62. Seo, H., Basu, D., Prezzi, M. and Salgado, R. (2009). "Load-settlement response of rectangular and circular piles in multi-layered soils." Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 135(3), 420-430.

63. Kim, D., Bica, A.V.D., Salgado, R., Prezzi, M. and Lee, W. (2009). "Load testing of a closed-ended pipe pile driven in multilayered soil." Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 135(4), 463-473.

64. Basu, D., Salgado, R. and Prezzi, M. (2009). "A continuum-based model for analysis of laterally loaded piles in layered soils." Geotechnique, 59(2), 127-140.

65. Loukidis, D. & Salgado, R. (2009). "Bearing capacity of strip and circular footings in sand using finite elements." Computers and Geotechnics, 36(6), pp. 871-879.

22

66. Carraro, A., Prezzi, M. and Salgado, R. (2009). "Shear strength and stiffness of sands containing plastic and non-plastic fines." Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 135(9), 1167-1178.

67. Zhang, J. and Salgado, R. (2010). "Stress-dilatancy relation for Mohr-Coulomb soils following a non-associated flow rule." Geotechnique, 60(3), 223–226.

68. Chakraborty, T. and Salgado, R. (2010). "Dilatancy and shear strength of sand at low confining pressures". Journal of Geotechnical and Geoenvironmental Engineering, 136(3), 527-532.

69. Lee, W.J., Kim, D., Salgado, R. and Zaheer, M. (2010). "Setup of driven piles in layered soil." Soils and Foundations, 50(5), 585-598.

70. Loukidis, D. and Salgado, R. (2010). "Effect of relative density and stress level on the bearing capacity of footings on sand." Geotechnique 61(2), July, 107-119.

71. Basu, P., Loukidis, D., Prezzi, M. and Salgado, R. (2011). "Analysis of shaft resistance of jacked piles in sands." International Journal for Numerical and Analytical Methods in Geomechanics, 35(15), 1605-1635.

72. Loukidis, D. & Salgado, R. (2012). "Active pressure on gravity walls supporting purely frictional soils." Canadian Geotechnical Journal, 2012, 49(1), 78-97.

73. Salgado, R., Seo, H., and Prezzi, M (2011). "Variational elastic solutions for axially loaded piles in multilayered soil." International Journal for Numerical and Analytical Methods in Geomechanics, first published online at http://onlinelibrary.wiley.com/doi/10.1002/nag.1110/abstract; DOI: 10.1002/nag.1110.

74. Salgado, R., Kim, D., Prezzi, M., Bica, A.V.D. and Lee, W. (2011). Closure to "Behavior of a closed-ended pipe pile driven in mixed soil." Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol. 137, No. 10, pp. 986-988.

75. Lee, J., Prezzi, M. and Salgado, R. (2011). "Experimental investigation of the combined load response of model piles driven in sand." Geotechnical Testing Journal, Vol. 34, No. 6, pp. 653-667, DOI: 10.1520/GTJ103269.

76. Kim, D.W. and Salgado, R. (2012). "Load and resistance factors for external stability checks of mechanically stabilized earth walls." Journal of Geotechnical and Geoenvironmental Engineering, ASCE 138(3), 241–251.

77. Kim, D.W. and Salgado, R. (2012). "Load and resistance factors for internal stability checks of mechanically stabilized earth walls." Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 138(8), 910-921.

78. Basu, D. and Salgado, R. (2012). "Load resistance factor design of drilled shaft in sand from soil variables." Journal of Geotechnical and Geoenvironmental Engineering, ASCE (posted ahead of print: http://dx.doi.org/10.1061/(ASCE)GT.1943-5606.0000714).

79. Chakraborty, T., Salgado, R., Basu, P. and Prezzi, M. (2012). "The shaft resistance of drilled shafts in clay." Journal of Geotechnical and Geoenvironmental Engineering, ASCE, doi: 10.1061/(ASCE)GT.1943-5606.0000803.

80. Bica, A., Prezzi, M., Seo, H., Salgado, R., and Kim, D. (2012). "Instrumentation and axial load testing of displacement piles." Proceedings of the ICE (Institution of Civil Engineers) – Geotechnical Engineering (accepted).

81. Dai, G., Salgado, R. Gong, W. and Zhang, Y. (2011). "Full-scale load tests on bored piles." Canadian Geotechnical Journal, 2012, 49(11), 1293-1308.

82. Zhao, X., Salgado, R. and Prezzi, M. (2012). "Centrifuge modeling of slope stabilization using combined active and passive anchoring systems." Proceedings of the ICE (Institution of Civil Engineers) – Geotechnical Engineering (accepted).

83. Chakraborty, T., Salgado, R. and Loukidis, D. (2012). "A Two-Surface Plasticity Model for Clay". Computers and Geotechnics, Volume 49, April 2013, Pages 170–190.

84. Seo, H., Prezzi, M. and Salgado, R. (2012). "Instrumented static load test on rock-socketed micropile." Journal of Geotechnical and Geoenvironmental Engineering, ASCE (accepted).

23

85. Basu, P., Prezzi, M. and Salgado, R. (2012). "Modeling of Installation and Quantification of Shaft Resistance of Drilled Displacement Piles in Sand." International Journal of Geomechanics, ASCE (accepted, invited paper).

86. Salgado, R. and Kim, D.W. (2011). "Load and resistance factor design of slopes." Journal of Geotechnical and Geoenvironmental Engineering, ASCE (in review).

87. Basu, P., Prezzi, M. Salgado, R., and Chakraborty, T. (2012). "Shaft resistance and setup factors for piles jacked in clays." Journal of Geotechnical and Geoenvironmental Engineering (accepted).

88. Choi, Y. S., Basu, D., Prezzi, M., and Salgado, R. (2012). "Response of laterally loaded rectangular and circular piles in soils with properties varying continuously or discretely with depth." Journal of Geotechnical and Geoenvironmental Engineering, ASCE (in review).

89. Choi, Y. S., Basu, D., Prezzi, M., and Salgado, R. (2012). “Study on laterally loaded piles with rectangular and circular cross sections.” Canadian Geotechnical Journal (in review).

90. Dai, G., Salgado, R. and Gong, W. (2012). "An experimental investigation on sidewall roughness of rock-socketed pile." (in preparation).

91. Salgado, R., Loukidis, D. and Zhang, Y. (2013). "Simulation of pile driving using advanced soil modeling" (in preparation).

92. Salgado, R., Faraz, T. and Prezzi, M. (2013). "Analysis of laterally loaded pile groups in multi-layered soil" (in preparation).

Refereed Conference or Symposium Proceedings

1. Salgado, R. and Mitchell, J.K. (1994). "Extra-terrestrial soil property determination by CPT." Eighth International Conference on Computer Methods and Advances in Geomechanics, Morgantown, May 22-28, H. Siriwardane and M. M. Zaman (eds.), Vol. 2, 1781-1788.

2. Ghionna, V.N., Jamiolkowski, M., Pedroni, S. and Salgado, R. (1994). "The tip displacement of drilled shafts in sands." Settlement '94, A. T. Yeung. and G. Félio (eds.), Vol. 2, June, 1039-1057, Geotechnical Engineering Division, ASCE, Texas A&M University, College Station, TX.

3. Bernal, A., Ahmed, I., Lovell, C.W., and Salgado, R. (1994). "Rubber sand as lightweight geomaterial." X Brazilian Conference of Soil Mechanics and Foundation Engineering, Vol. 2, November, 593-600, Iguassu Falls.

4. Ashmawy, A., Salgado, R., Guha, S., and Drnevich, V. P. (1995). "Soil damping and its use in dynamic analysis." Third International Conference on Recent Advances in Geotechnical Engineering and Soil Dynamics, Paper 1.13, April, 35-41, St. Louis, MO.

5. Salgado, R. (1995). "Design of deep foundations in sands based on CPT results." X Panamerican Conference on Soil Mechanics and Foundation Engineering, Vol. 3, November, 1261-1274, Guadalajara, Mexico.

6. Bernal, A., Swan, R., Salgado, R. and Lovell, C.W. (1995). "Pullout testing of geogrids in tire shreds and rubber sand." Proc. 3rd Annual Great Lakes Geotechnical and Geoenvironmental Conference, Cleveland, OH, May, 219-231.

7. Korayem, A., Salgado, R., Lovell, C. W. (1996). "Compaction of fly and bottom ash mixtures." Proceedings of the 51st Industrial Waste Conference, May 6-8, 251-255.

8. Bernal, A., Swan, R., Salgado, R. and Lovell, C.W. (1997). "Pullout testing of geogrids in tire shreds and rubber sand." Testing Soil Mixed with Waste or Recycled Materials, ASTM STP 1275, Mark A. Wasemiller, Keith B. Hoddinott (Eds.), ASTM, 109-121.

9. Karim, A., Salgado, R. and Lovell, C.W. (1997). "Building embankments of coal combustion fly ash-bottom ash mixtures." Proc. 48th Highway Geology Symposium, Knoxville, TN, May, 66-74.

10. Bandini, P. and Salgado, R. (1998). "Pile design based on penetration test results." First International Conference on Site Characterization, Vol. 2, April, 967-976, Atlanta.

11. Karim, A., Lovell, C.W., and Salgado, R. (1998). "Mixtures of coal combustion ashes for highway embankments." Fourth Symposium on Environmental Geotechnics and Global Sustainable Development, Boston, August, 431-440.

24

12. Lee, J. and Salgado, R. (1999). "Pre-failure loading response of foundations on sand." Second International Symposium on Pre-Failure Deformation Characterization of Geomaterials, Turin, Italy, September 28-30, Vol. 1, 667-674.

13. Lee, J. H. and Salgado, R. (2000). "Application of shredded tires as lightweight backfill." Proceedings of International Symposium on Coastal Geotechnical Engineering in Practice, Yokohama, Japan, Sept. 20-22, Vol. 1, 623-628.

14. Lee, J. H. and Salgado, R. (2001). "Non-linear finite element analysis of calibration chamber plate load tests for sands." Proceedings of the 10th International Conference on Computer Methods and Advances in Geomechanics, Tucson, January, Balkema, 941-946.

15. Loukidis, D., Salgado, R. and Bobet, A. (2001). "Seismic design of pile foundations in southern Indiana." Proceedings of the Fourth International Conference on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics, San Diego, California, March 2001. CD-ROM, Univ. of Missouri-Rolla, Rolla, MO, S. Prakash (ed.), Paper No. 8-09, 6 pages.

16. Bandini, P., Salgado, R., and Harb, J. A. (2001). "Análise limite para taludes com perfis complexos de solos." Conferência Brasileira sobre Estabilidade de Encostas, III COBRAE, Rio de Janeiro, Brazil, Vol. 1, 3rd Session “Analise de Estabilidade”, 397-402.

17. Lee, K., Cho, J., Salgado, R., Lee, I. and Kim, N. (2001). "Retaining wall model test with waste foundry sand mixture as controlled low strength materials." 17th International Conf. on Solid Waste Technology and Management, Oct. 21-24, Philadelphia, USA, Section 3B Waste Materials in Construction, 204-210.

18. Lee, J. H. and Salgado, R. (2002). "Mechanical properties of fly and bottom ash mixtures for embankment application." Proceedings of the International Workshop on Light-Weight Geomaterials (IW-LGM2001), Tokyo, Japan, March, 83-89.

19. Lee, J.H., Salgado, R., Prezzi, M. and Paik, K. (2003). "Instrumented load tests on closed- and open-ended piles." Deep Foundations Institute 28th Annual Conference on Deep Foundations, Miami, October, pp. 233-242.

20. Basu, D., Salgado, R., Prezzi, M., Lee, J.H., and Paik, K., (2005). "Recent advances in the design of axially-loaded piles in sandy soils." Geo-Frontiers, Austin, TX, pp. 1-13.

21. Lee, J. H., Salgado, R., and Paik, K. H. (2004). "CPT-based load capacity of closed- and open-ended pipe piles." Proceedings of International Site Characterization, ICS 2, Porto, Portugal, Vol. 2, September, 1499-1505.

22. Paik, K., Salgado, R. and Lee, J. (2004). "Design lessons from load tests on open- and closed-ended pipe piles." Proceedings of the Fifth International Conference on Case Histories in Geotechnical Engineering, New York, April, Paper No. 1.11.

23. Carraro, J.A.H.; P. Bandini; R. Salgado (2005). "Liquefaction resistance of clean and silty sands from cone penetration." Geotechnical Special Publication No. 133; Rathje E.M. (ed.); Proc. Geo-Frontiers 2005 Conference (Geo-Institute of the ASCE), Austin, TX, January 2005.

24. Foye, K. C. and R. Salgado (2005). "Soil characterization for consistent reliability in the load and resistance factor design of pile foundations." International Symposium on Frontiers in Offshore Geotechnics. Perth, Western Australia, Australia.

25. Bandini, P., Loukidis, D. and Salgado, R. (2005). "Limit analysis of seismically loaded slopes." Proc. 16th International Conference of the IACMAG (Int. Assoc. of Computer Methods and Advances in Geomechanics), Torino, Italy, June 2005.

26. Loukidis, D., Bandini, P., Salgado, R. (2005). "Critical seismic coefficient using limit analysis and finite elements." Proc. 11th International Conference on Soil Mechanics and Geotechnical Engineering, ISMGE, Osaka, Japan, September 2005.

27. Salgado, R. (2006). "The role of analysis in pile design." In Modern Trends in Geomechanics, Springer Proc. in Physics, Vol. 106 (Wu, Wei; Yu, H.-S., Eds.).

28. Salgado, R. (2006). "Analysis of the axial response of non-displacement piles in sand." Geomechanics II: Testing, Modeling and Simulation. Proc. of the 2nd Japan- U.S. Workshop, Geotechnical Special Publication No. 143, ASCE, 427-439.

25

29. Lee, Woojin, Lee, Won-Je, and Salgado, R. (2004). "An application of fiber Bragg grating sensor to piles." Geo-Congress, Atlanta.

30. Kim, B. J., Prezzi, M., Salgado, R., Lee, J. H. (2005). "Mechanical properties of Class F fly and bottom ash mixtures for embankment applications." Proc. of IGC 2005, Geotechnical Practices for Environmental Management, Disaster Mitigation and Foundation Engineering, Ahmedabad, India, Dec, 239-242.

31. Lee, J. H. and Salgado, R. (2006). "Application of CPT cone resistance for footing bearing capacity estimation." Proc. of GeoShanghai International Conference, Shanghai, China.

32. Salgado, R., Prezzi, M. and Seo, H. (2007). "Advanced modeling tools for the analysis of axially loaded piles." Keynote paper and lecture, The Japanese Geotechnical Society, International Workshop on Pile Foundation Analysis and Design, Tokyo, Japan.

33. Seo, H., Prezzi, M. and Salgado, R. (2008). "Settlement analysis of axially loaded piles." 6th International Conference on Case Histories in Geotechnical Engineering, Arlington, VA, August 2008.

34. Basu, D. and Salgado, R. (2008). "An alternative method for determining ground strains for soil-structure interaction problems." Geo-Congress 2008, New Orleans, CD-ROM.

35. Salgado, R. (2008). "Analysis of single piles: Challenges and solutions." 12th International Conference of the International Association for Computer Methods and Advances in Geomechanics, Goa, India, October 1-6, 3117-3126.

36. Basu, D. and Salgado, R. (2008). "Method of initial parameters for laterally loaded piles." Proceedings of the 12th International Conference of IACMAG, October 2008, Goa, India, October 1-6, 3335-3343.

37. Loukidis, D. and Salgado, R. "Numerical study of limit shaft resistance of bored piles in sand." Proceedings of the 12th International Conference of IACMAG, October 2008, Goa, India, October 1-6, 3376-3383.

38. Foye, K.C. and Salgado, R. (2008). "Probabilistic development of load and resistance factor design for driven pipe piles in sands: lessons learned." 33rd Annual Conference on Deep Foundations and 11th International Conference on Deep Foundations, New York City.

39. Salgado, R., Basu, D., Gavin, K., Kumar, S., Alvarez, G. M. E. and Ahmad, S. F. (2008). "Analysis, design, testing and performance of foundations." General Report for Session 1, Proceedings of the 6th International Conference on Case Histories in Geotechnical Engineering, Arlington, VA, U.S.A., August 2008.

40. Chakraborty, T. and Salgado, R. (2009). "Dilatancy of sand at very low confining stresses." 17th ICSMGE, CD-Rom, Alexandria, Egypt, CD-ROM.

41. Salgado, R. and Basu, D. (2009). "Application of the method of initial parameters to the laterally loaded pile problem". 17th ICSMGE, Alexandria, Egypt, CD-ROM.

42. Salgado, R and Prezzi, M. (2009). "A Novel Method of Analysis of Laterally Loaded Piles." Proceedings of 2009 NSF Engineering Research and Innovation Conference, Honolulu, Hawaii, June, 8pp.

43. Murthy, T. G., Prezzi, M., Salgado R. & Loukidis, D. (2010). "Undrained response of clean and silty sands." Fifth International Conference on Recent Advances in Earthquake Geotechnical Engineering and Soil Dynamics and Symposium in Honor of Professor I.M Idriss, San Diego, CA, May 2010, Paper No. 1.15b, 8pp.

44. Basu, D. Salgado, R and Prezzi, M. (2010). "A new model for analysis of laterally loaded piles." GeoFlorida, West Palm Beach, FL, February 2010.

45. Lee, J., Eun, J., Prezzi, M. and Salgado, R. (2010). "Settlement estimation of multiple footings." 2nd International Symposium on Cone Penetration Testing, Huntington Beach, CA, May 2010.

46. Kim, K., Prezzi, M., Salgado, R. and Lee, W. (2010). "Penetration rate effects on cone resistance measured in a calibration chamber." 2nd International Symposium on Cone Penetration Testing, Huntington Beach, CA, May 2010, Vol. 2, Paper No. 2-03, 8pp.

26

47. Basu, D. and Salgado, R. (2010). "Elastic analysis of laterally loaded rectangular piles." GeoFlorida, West Palm Beach, FL, February 2010.

48. Salgado, R. (2010). "The Axial Resistance of Nondisplacement Piles." In: Art of Foundation Engineering Practice, GeoFlorida 2010, GSP 198 (Eds: Mohamad H. Hussein; J. Brian Anderson; and William M. Camp), 584-604 (invited paper).

49. Seo, H., Prezzi, M. and Salgado, R. (2011). "Elastic analysis for axially loaded piles in multi-layered soil." 13th International Conference of the International Association for Computer Methods and Advances in Geomechanics (IACMAG), Melbourne, Australia, May 2011, Volume 2, pp. 984-990.

50. Basu, P., Loukidis, D., Prezzi, M. and Salgado, R. (2011). "Numerical simulation of shaft resistance development for piles jacked in sand." 13th International Conference of the International Association for Computer Methods and Advances in Geomechanics (IACMAG), Melbourne, Australia, May 2011, Volume 2, pp. 905-912.

51. Basu, D. Salgado, R and Prezzi, M. (2011). "A new model for analysis of laterally loaded piles." GeoFrontiers, Dallas, TX, March 2011, 8pp.

52. Foye, K., Prezzi, M. and Salgado, R. (2011). "Developing resistance factors for design of piles in sand." GI-ASCE GeoRisk 2011, Atlanta, GA, June 26-28, 8pp.

53. Foye, K., Prezzi, M. and Salgado, R. (2011). "Resistance factors for design of piles in sand: Tools to understand design reliability." 3rd International Symposium on Geotechnical Safety and Risk. Munich, Germany.

54. Salgado, R. and Woo, S. (2011). "Soil property-based methods for nondisplacement pile design." 14th Pan-American Conference on Soil Mechanics and Geotechnical Engineering, Oct. 2-6, Toronto, Canada, 8pp.

55. Salgado, R., Prezzi, M. and Tehrani, F. (2011). "Load and resistance factor design for axially loaded drilled shafts." 14th Pan-American Conference on Soil Mechanics and Geotechnical Engineering, Oct. 2-6, Toronto, Canada, 8pp.

56. Loukidis, D. & Salgado, R. (2010). "Equivalent friction angle in bearing capacity calculations for footings on granular soils." Proceedings of the Vardoulakis mini-symposia, 9th HSTAM International Congress on Mechanics, Limassol, Cyprus, 285-292.

57. Kim, D. and Salgado, R. (2012). "Resistance factors for MSE wall sliding and overturning checks." Geo-Congress, Oakland, 395-404.

58. Tehrani, F., Prezzi, M., Salgado, R. (2012). "Geotechnical Properties of Recyclable Materials Used in Road Construction in Indiana." Proc., 17th Annual Great Lakes Geotechnical/Geoenvironmental Conference, Cleveland, OH, May 24, 2012, CD-ROM.

59. Salgado, R., Prezzi, M., Kim, K. and Lee, W.L. (2012). "Penetration rate effects on cone resistance measured in a calibration chamber." Geotechnical and Geophysical Site Characterization 4, ISC 4, Vol. 1, 1025, CRC Press.

60. Salgado, R. (2012). "The mechanics of cone penetration: Contributions from experimental and theoretical studies." Geotechnical and Geophysical Site Characterization 4, ISC 4, Vol. 1, 131-153, CRC Press. (Keynote paper)

61. Salgado. R. (2012). "Modern Trends in the Analysis of Foundations." Modern Trends in Geomechanics, Nottingham. (Invited paper)

62. Salgado, R., Lyamin, A. and Lim, J. (2013). "Foundation Failure Case Histories Reexamined using Modern Geomechanics." 7th International Conference on Case Histories in Geotechnical Engineering (Keynote (SOAP) paper).

63. Loukidis, D. and Salgado, R. (2013). "Active Earth Thrust on Walls Supporting Granular Soils: Effect of Wall Movement." Proceedings of the 18th International Conference on Soil Mechanics and Geotechnical Engineering, Paris 2013.

27

64. Zhang, Y., Salgado, R., Dai, G. and Gong, W. (2013). "Load Tests on Full-Scale Bored Pile Groups." Proceedings of the 18th International Conference on Soil Mechanics and Geotechnical Engineering, Paris.

65. Salgado, R., Basu, D., Prezzi, M., and Tehrani, F. (2013). "Continuum-Based Analysis of Laterally Loaded Piles." Proceedings of the 18th International Conference on Soil Mechanics and Geotechnical Engineering, Paris.

Books

1. Salgado, R. (2008). The Engineering of Foundations. McGraw-Hill, 888pp. 2. Salgado, R. (2008). Solutions Manual for the Engineering of Foundations. McGraw-Hill, 715pp.

Chapters in Books

1. Salgado, R. (1995). "In-situ tests and field instrumentation." The Civil Engineering Handbook, W. F. Chen, (ed.), 921-943.

2. Salgado, R. and Santagata, M. (2002). "In-situ tests and field instrumentation." The Civil Engineering Handbook, 2nd Ed., W. F. Chen, (ed.), 28-1 to 28-23.

3. Salgado, R. "Design of pile foundations". The Encyclopedia of Life, UNESCO.

Government, University, or Industrial Reports (non-refereed)

Three of my JTRP reports are in the top four most downloaded reports from the entire JTRP program. I am highlighting these three in the list that follows. 1. Bernal, A., Lovell, C., Salgado, R. (1996). "Laboratory study on the use of tire shreds and

rubber-sand in backfilled and reinforced soil applications." FHWA/IN/JHRP-96/12, HPR- 2087, Joint Transportation Research Program, Purdue University.

2. Lee, K., Lovell, C., Salgado, R. (1996). "The use of pyrolized carbon black as an additive (Part 3: Air cooled furnace slag). " FHWA/IN/JHRP-96/19, SPR-2096, Joint Transportation Research Program, Purdue University.

3. Karim, A., Lovell, C., Salgado, R. (1997). "Building embankments of fly/bottom ash mixtures." FHWA/IN/JTRP-97/01, SPR-2115, Joint Transportation Research Program, Purdue University.

4. Luo, X., Salgado, R., Altschaeffl, A. (1998). "Cone penetration test to assess the mechanical properties of subgrade soils." FHWA/IN/JTRP-98/13, SPR-2133, Joint Transportation Research Program, Purdue University. (second most downloaded report from JTRP)

5. Salgado, R. and Lee, J. (1999). "Pile design based on cone penetration test results." FHWA/IN/JTRP-99/08, SPR-2142, Joint Transportation Research Program, Purdue University. (fourth most downloaded report from JTRP)

6. ACI Committee 336 (2001). Reference specifications for the construction of drilled piers (336.1) & Commentary (336.1R-98), 25pp.

7. Bobet, A., Salgado, R., Loukidis, D. (2001). "Seismic design of deep foundations." FHWA/IN/JTRP-2000/22, SPR-2410, Joint Transportation Research Program, Purdue University.

8. Kim, K., Salgado, R., Lee, J. and Paik, K. (2002). "Load Tests on Pipe Piles for Development of CPT-Based Design Method." FHWA/IN/JYRP-2002/4, SPR-2361, Joint Transportation Research Program, Purdue University.

9. Carraro, J. and Salgado, R. (2004). "Mechanical behavior of bon-textbook soils." FHWA/IN/JTRP-2004/05, Joint Transportation Research Program, Purdue University.

10. Salgado, R. and Yoon, S. (2003). "Construction of tire shreds test embankment." FHWA/IN/JTRP-2002/35, Joint Transportation Research Program, Purdue University.

11. Salgado, R. and Yoon, S. (2003). "Dynamic cone penetration test (DCPT) for subgrade assessment." FHWA/IN/JTRP-2002/30, Joint Transportation Research Program, Purdue

28

University. (top downloaded report from JTRP and fifth most downloaded Purdue University ePub).

12. Kim, K., Salgado, R., Lee, J. and Paik, K. (2002). "Load tests on pipe piles for development of CPT-based design method." FHWA/IN/JTRP-2002/04, Joint Transportation Research Program, Purdue University.

13. Salgado, R. and Kim, D. (2002). "Effects of heavier truck loadings and super-single tires on subgrades." FHWA/IN/JTRP-2002/20 Joint Transportation Research Program, Purdue University, Joint Transportation Research Program, Purdue University.

14. Kim, B., Yoon, S., Balunaini, U., Prezzi, M. and Salgado, R. (2006). "Determination of ash mixture properties and construction of test embankment - Part A." Report No. FHWA/IN/JTRP-2006/24-1, SPR-2591, Joint Transportation Research Program, Purdue University.

15. Yoon, S., Balunaini, U., Prezzi, M., Salgado, R. and Siddiki N. Z. (2006). "Determination of ash mixture properties and construction of test embankment - Part B." Report No. FHWA/IN/JTRP-2006/24-2, SPR-2591, Joint Transportation Research Program, Purdue University.

16. Kim, K., Prezzi, M. and Salgado. R. (2007). "Interpretation of cone penetration tests in clayey soils." FHWA/IN/JTRP-2007/22, SPR-0622, Joint Transportation Research Program, Purdue University.

17. Basu, D., Salgado, R. and Prezzi, M. "Analysis of laterally loaded piles in multilayered soil deposits." FHWA/IN/JTRP-2007/23, Joint Transportation Research Program, Purdue University.

18. Balunaini, U., Yoon, S., Prezzi, M., Salgado, R. and McCullouch, B. (2008). "Research and development of more economical mixtures of tire shreds and sands." IDEM report for project A305-4-115.

19. Balunaini, U., Yoon, S., Prezzi, M., Salgado, R. and McCullouch, B. (2008). "Design, planning, and implementation of civil engineering applications for tire shreds." IDEM report for project A305-4-112.

20. Loukidis, D., Salgado, R and Abou-Jaoude, G. (2009). "Assessment of axially loaded pile dynamic design methods and review of INDOT axially loaded pile dynamic design methods." FHWA/IN/JTRP-2009/xx, Joint Transportation Research Program, Purdue University.

21. Kim, D.W. and Salgado, R. (2009). "Limit states and load and resistance factor design of slopes and retaining structures." FHWA/IN/JTRP-2009/xx, Joint Transportation Research Program, Purdue University.

22. Salgado, R., S. Woo, and D. Kim (2011). "Development of load and resistance factor design for ultimate and serviceability limit states of transportation structure foundations." Publication FHWA/IN/JTRP-2011/03. Joint Transportation Research Program, Indiana Department of Transportation and Purdue University, West Lafayette, Indiana. doi: 10.5703/1288284314618. http://dx.doi.org/10.5703/1288284314618.

23. Kim, H., M. Prezzi, and R. Salgado (2010). "Use of dynamic cone penetration and Clegg hammer tests for quality control of roadway compaction and construction." Publication FHWA/IN/JTRP-2010/27. Joint Transportation Research Program, Indiana Department of Transportation and Purdue University, West Lafayette, Indiana. doi: 10.5703/1288284314246 (http://dx.doi.org/10.5703/1288284314246).

24. Basu, P., R. Salgado, M. Prezzi, and T. Chakraborty (2009). "A method for accounting for pile setup and relaxation in pile design and quality assurance." Publication FHWA/IN/JTRP-2009/24. Joint Transportation Research Program, Indiana Department of Transportation and Purdue University, West Lafayette, Indiana. doi: 10.5703/1288284314282 (http://dx.doi.org/10.5703/1288284314282).

25. Salgado, R., and Y. Zhang. Use of Pile Driving Analysis for Assessment of Axial Load Capacity of Piles. Publication FHWA/IN/JTRP-2012/11. Joint Transportation Research Program, Indiana Department of Transportation and Purdue University, West Lafayette, Indiana, 2012. doi: 10.5703/1288284314671.

29

Invited Presentations

Keynote Lectures and General Reports

Keynote Lecture - "Reutilization of materials in civil engineering constructions." Brazilian Conference on Sustainable Development, Florianópolis, Brazil, June 1996.

Keynote Lecture - "Advances in non-displacement pile design." Deep Foundation Symposium, Porto Alegre, Brazil, October 4-5, 2004.

Keynote Lecture - "Advanced modeling tools for the analysis of axially loaded piles." International Workshop on Pile Foundation Analysis and Design, Tokyo, Japan, February 2007.

Keynote Lecture - "Modern methods of pile foundation analysis." Daegu Annual Geotechnical Conference, Daegu, South Korea, February 2007.

Invited Lecture (General Report) - "Analysis, design, testing and performance of foundations." 6th International Conference on Case Histories in Geotechnical Engineering, Arlington, VA, August 2008.

Invited Lecture (Special Lecture) - "Modeling of Liquefaction using Bounding-Surface Plasticity" Fifth International Conference on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics, 2010.

Keynote Lecture - "The mechanics of cone penetration." 4th International Conference on Geotechnical and Geophysical Site Characterization (ISC'4), 2012.

Keynote (SOAP) Lecture - "Foundation Failure Cases Reexamined using Modern Geomechanics." 7th International Conference of Geotechnical Case Histories, Chicago, 2013.

Other Invited Lectures

Invited Seminar: "Penetration resistance in sands", Georgia Tech, April 1992. Invited Seminar: "Penetration resistance in sands", Carnegie Mellon University, April 1993. Invited Seminar: "Penetration resistance in sands", Universidade de Brasília, May 1993. Invited Seminar: "Penetration resistance in sands", University of California, Berkeley, April 1994. Invited Seminar: "Liquefaction potential assessment in sands from CPT results", University of California,

Los Angeles, June 1994. Invited Seminar: "The design of drilled shafts using CPT results", Universidade de Brasília, May 1995. Invited Seminar: "Soil liquefaction susceptibility", Universidade Federal de Minas Gerais”, May 1995. Invited Seminar: "Interpretation of the cone penetration test", Univ. Federal do Rio Grande do Sul, May

1995. Invited Seminar: "Calibration chamber cone penetration tests", U.S. Army WES, June 1995. Invited Seminar: "Penetration resistance in sands: Analysis and applications", ASCE Indianapolis Chapter,

Soil Mechanics Group, April 1997. Invited Seminar: "Graduate studies at Purdue University", UFRGS, Porto Alegre, Brazil, July 1997. Invited Seminar: "Penetration resistance in sands: Analysis and applications", Columbia University, May

1998. Invited Seminar: "Foundations in rock", Department of Transportation of Rio Grande do Sul (DAER),

July 1998. Invited Seminar: "Foundations in rock", Association of Construction Professionals of Bento (ASCON),

July 1998. Invited Seminar: "Interpretation of CPT tests in granular soils": UFRGS, Porto Alegre, Brazil, January

1999. Invited Seminar: "Shear strength and stiffness of silty sands", University of Western Australia, Perth,

March, 2000. Invited Seminar: "Shear strength and stiffness of silty sands", University of Newcastle, May 2000. Invited Seminar: "Base resistance of non-displacement piles in sand": University of Western Australia,

Perth, April, 2000.

30

Invited Seminar: "Shear strength and stiffness of silty sands", ASCE Chicago Group, May 2001. Invited Seminar: "Design of pipe piles": ASCE Indianapolis section, April, 2002. Invited Lecture: "Liquefaction of silty and clay sands." EERI, Purdue Student Chapter, November 2002. Invited Lecture: "Limit states design of shallow foundations." ACI Convention, September 2003, Boston. Invited Lecture: "Modern trends in foundation design and construction." Association of Developers –

Sinduscon, Porto Alegre, Brazil, October 2004. Invited Lecture: "Mechanical properties of CCBP's", Seminar on Recycling Opportunities for Fly Ash and

Other Coal Combustion Products in Concrete and Construction Materials. Sponsored by U.S. Environmental Protection Agency - Region 5, Chicago, IL, UWM Center for By-Products Utilization American Coal Ash Association, Headwaters, Inc., Lafarge North America, May 24, 2005, Indianapolis, Indiana.

Invited Lecture: "Analysis of the axial response of non-displacement piles in sand." - Presentation given as part of the Second Japan-U.S. Workshop on Testing, Modeling and Simulation in Geomechanics, September 8-10, 2005, Japan.

Invited Seminar: "Limit States Design of Foundations". Council of Contractors of Rio Grande do Sul, Brazil, 2005.

Invited Lecture - "Advances in deep foundation design." Modern Trends in Geomechanics, Vienna, Austria, June 27-29, 2005; workshop series by invitation only; limited to 20 to 30 top geotechnical engineering researchers from the whole World.

Invited Seminar: "Modern analysis of pile foundations": Korea Railway Research Institute, Seoul, February, 2007.

Invited Presentation: "Overview of Construction and Design of Auger Cast-in-Place and Drilled Displacement Piles." Geyer Fundações, Porto Alegre, Brazil, March 2007.

Invited Seminar: "Modern analysis of pile foundations": University of California, San Diego, 2008. Theme Lecture - "Analysis of single piles: Challenges and solutions." 12th International Conference of the

International Association for Computer Methods and Advances in Geomechanics, Goa, India, October 1-6, 2008.

Invited Seminar: "Modern foundation practices in North America": Geyer Estaqueamento, Ltda., Porto Alegre, Brazil, 2009.

Invited Seminar: "Advances in the mechanics of soils and their use in the solution of foundation engineering problems": Case Western Reserve University, September, 2009.

Invited Seminar: "Advances in the mechanics of soils and their use in the solution of foundation engineering problems": University of Michigan, October, 2009.

Panelist, Deep Foundations major panel discussion, GeoFlorida, 2010. Invited Presentation: "Pile Integrity Testing." Geyer Fundações, Porto Alegre, Brazil, April 2010. Invited Seminar: "Use of modern analysis to gain insights into the limit states of foundations": Southeast

University, China. Part of a cross-China lecture series in late 2011. Invited Seminar: "Use of modern analysis to gain insights into the limit states of foundations": Dalian

University of Technology, China, December 2011. Part of a cross-China lecture series in late 2011.

Invited Seminar: "Use of modern analysis to gain insights into the limit states of foundations": Hohai University, China, December 2011. Part of a cross-China lecture series in late 2011.

Invited Seminar: "Use of modern analysis to gain insights into the limit states of foundations": Tongji, University, China, December 2011. Part of a cross-China lecture series in late 2011.

Invited Webinar: "Use of modern analysis to gain insight into the limit states of foundations": Kleinfelder, Inc., 2011.

Invited presentation – "Use of Modern Analytical Tools in the Analysis of Foundation Problems." 3rd Modern Trends in Geomechanics, workshop series by invitation only; limited to 20 to 30 top geotechnical engineering researchers from the whole World; Nottingham, U.K, September 2012.

31

Invited Conference Presentations Invited Presentation: "Size effects in calibration chamber cone penetration tests." Calibration Chamber

Workshop, X Brazilian Conference of Soil Mechanics and Foundation Engineering, November 1994.

Invited Presentation: "Extra-terrestrial soil property determination by CPT." Eighth International Conference on Computer Methods and Advances in Geomechanics, Morgantown.

Invited Lecture: "Upper and lower bound analysis for slope stability assessment." Lecture given as part of panel session on slope stability analysis, San Diego ASCE convention, November 1995.

Invited Presentation: "The tip displacement of drilled shafts in sands." Settlement '94, Texas A&M University, College Station, TX, 1994.

Invited Presentation: "Rubber sand as lightweight geomaterial." X Brazilian Conference of Soil Mechanics and Foundation Engineering, Iguassu Falls, Brazil, 1994.

Invited Presentation: "Soil damping and its use in dynamic analysis." Third International Conference on Recent Advances in Geotechnical Engineering and Soil Dynamics, St. Louis, MO, 1995.

Invited Presentation: "Design of deep foundations in sands based on CPT results." X Panamerican Conference on Soil Mechanics and Foundation Engineering, Guadalajara, Mexico, 1995.

Invited Presentation: "Pullout testing of geogrids in tire shreds and rubber sand." Proc. 3rd Annual Great Lakes Geotechnical and Geoenvironmental Conference, Cleveland, OH, May, 1995.

Invited Presentation: "Compaction of fly and bottom ash mixtures." Proceedings of the 51st Industrial Waste Conference, May 6-8, 1996.

Invited Presentation: "Pullout testing of geogrids in tire shreds and rubber sand." Testing Soil Mixed with Waste or Recycled Materials, 1996.

Invited Presentation: "Building embankments of coal combustion fly ash-bottom ash mixtures." Proc. 48th Highway Geology Symposium, Knoxville, TN, 1998.

Invited Presentation: "Pile design based on penetration test results." First International Conference on Site Characterization, Atlanta, 1998.

Invited Presentation: "Mixtures of coal combustion ashes for highway embankments." Fourth Symposium on Environmental Geotechnics and Global Sustainable Development, Boston, 1998.

Invited Presentation: "Pre-failure loading response of foundations on sand." Second International Symposium on Pre-Failure Deformation Characterization of Geomaterials, Turin, Italy, 1999.

Invited Presentation: "Application of shredded tires as lightweight backfill." International Symposium on Coastal Geotechnical Engineering in Practice, Yokohama, Japan, 2000.

Invited Presentation: "Non-linear finite element analysis of calibration chamber plate load tests for sands." 10th International Conference on Computer Methods and Advances in Geomechanics, Tucson, January, 2001.

Invited Presentation: "Seismic design of pile foundations in southern Indiana." Proceedings of the Fourth International Conference on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics, San Diego, California, March 2001.

Invited Presentation: "Análise limite para taludes com perfis complexos de solos." Conferência Brasileira sobre Estabilidade de Encostas, III COBRAE, Rio de Janeiro, Brazil, 2001.

Invited Presentation: "Retaining wall model test with waste foundry sand mixture as controlled low strength materials." 17th International Conf. on Solid Waste Technology and Management, Oct. 21-24, Philadelphia, USA, 2001.

Invited Lecture: "Future role of computers in pile design and construction." Lecture given as part of a panel session on advanced modeling of deep foundations, Orlando, FL, February 2002.

Invited Presentation: "Mechanical properties of fly and bottom ash mixtures for embankment application." International Workshop on Light-Weight Geomaterials (IW-LGM2001), Tokyo, Japan, March, 2002.

Invited Lecture: "Instrumented load tests on closed- and open-ended piles." Deep Foundations Institute 28th Annual Conference on Deep Foundations, Miami, October 2003.

32

Invited Lecture: "Recent advances in the design of axially-loaded piles in sandy soils." Geo-Frontiers, Austin, January 2005.

Invited Lecture: "Limit analysis of slopes subjected to seismic loadings." 11th International Conference of the International Association for Computer Methods and Advances in Geomechanics, Turin, Italy, June 2005.

Invited Presentation: "The Confluence of Visualization, Experimental Mechanics and Theoretical Mechanics in the Solution of Geotechnical Problems", Geo-Congress, New Orleans, 2008.

Invited Presentation: "Liquefaction resistance of clean and silty sands from cone penetration." Geo-Frontiers, Austin, TX, January 2005.

Invited Presentation: "Critical seismic coefficient using limit analysis and finite elements." 11th International Conference on Soil Mechanics and Geotechnical Engineering, ISMGE, Osaka, Japan, September 2005.

Invited Presentation: "An application of fiber Bragg grating sensor to piles." Geo-Congress, Atlanta, 2004. Invited Presentation: "An alternative method for determining ground strains for soil-structure interaction

problems." Geo-Congress, New Orleans, 2008. Invited Presentation: "Probabilistic development of load and resistance factor design for driven pipe piles

in sands: lessons learned." 33rd Annual Conference on Deep Foundations and 11th International Conference on Deep Foundations, New York City, 2008.

Invited Presentation: "A new model for analysis of laterally loaded piles." GeoFlorida, West Palm Beach, FL, February 2010.

Invited Presentation: "Elastic analysis of laterally loaded rectangular piles." GeoFlorida, West Palm Beach, FL, February 2010.

Invited Presentation: "A new model for analysis of laterally loaded piles." GeoFrontiers, Dallas, TX, March 2011.

Invited Presentation: "Developing resistance factors for design of piles in sand." GeoRisk, Atlanta, GA, 2011.

Invited Presentation: "Resistance factors for design of piles in sand: Tools to understand design reliability." 3rd International Symposium on Geotechnical Safety and Risk, Munich, Germany, 2011.

Invited Presentation: "Soil property-based methods for nondisplacement pile design." 14th Pan-American Conference on Soil Mechanics and Geotechnical Engineering, Oct. 2-6, Toronto, Canada, 2011.

Invited Presentation: "Equivalent friction angle in bearing capacity calculations for footings on granular soils." Vardoulakis mini-symposia, 9th HSTAM International Congress on Mechanics, Limassol, Cyprus, 2011.

Invited Presentation: "Developing Resistance Factors for Design of Piles in Sand." GeoRisk, Atlanta, GA, June 2011.

Invited Presentation: "A New Model for Analysis of Laterally Loaded Piles." GeoFrontiers: Advances in Geotechnical Engineering, Dallas, TX, March 2011.

Invited Presentation: "Load and Resistance Factor Design for Axially Loaded Drilled Shafts." 14th Pan-American Conference on Soil Mechanics and Geotechnical Engineering, Toronto, Canada, 2011.

Invited Presentation: "Resistance factors for MSE wall sliding and overturning checks." Geo-Congress, Oakland, 2012. Invited Presentation: "Penetration rate effects on cone resistance measured in a calibration chamber." Geotechnical and Geophysical Site Characterization 4, ISC 4, Porto de Galinhas, 2012.

Media Coverage Results of research done by Profs. Monica Prezzi and Rodrigo Salgado and their students on the

use of mixtures of tire shreds and sand in geotechnical engineering projects have allowed the state of Indiana to save considerable amounts of money in cost of materials in the 2008-2010 period, savings that are expected to continue on a sustained basis. A sampling of media coverage of this research includes:

33

"Purdue Researchers Develop Guidelines for Integrating Tires into Road Projects" by Jenny Jones, ASCE Civil Engineering Magazine, February, 2011, 44-45.

http://www.purdue.edu/newsroom/research/2010/101202PrezziTires.html http://www.purduealumni.org/events/news/indiana-putting-old-tires-to-new-use-in-transportation-

projects/ http://www.lafayette-online.com/community/2010/12/old-tires-new-use/ http://www.jconline.com/article/20101212/NEWS0501/12120325/1001/NEWS/Purdue-research-puts-

old-rubber-in-the-road--too http://www.rdmag.com/News/2010/12/Materials-Putting-Old-Tires-To-New-Use-In-Transportation-

Projects/ http://www.physorg.com/news/2010-12-putting-old-tires-to-new.html http://www.upi.com/Top_News/US/2010/12/02/Old-tires-find-new-use-in-road-work/UPI-

83811291314423/ http://imperialvalleynews.com/index.php?option=com_content&task=view&id=8712&Itemid=1

The fact that my 2003 report is the most downloaded (more than 25000 downloads) Joint Transportation Research Program technical report is covered in an article in the Journal and Courier newspaper of West Lafayette in an article appearing on 2/3/2013 entitled "Purdue helps lead way toward digital depositories": http://www.jconline.com/apps/pbcs.dll/article?AID=2013302030034.

XII. Industry Interactions

Consulting for Geyer Estaqueamento Ltda., a major foundations contractor in Brazil. Several occasions (1987-1998/2003-present). Activities included: - foundation design for well over a hundred high-rise buildings in the following

Brazilian cities: Porto Alegre, São Paulo, Camburiú, Florianópolis, Brasília, Pelotas, Caxias do Sul, and Curitiba;

- assessment of foundation adequacy for a nearly complete building that presented evidence of significant foundation movement, Brasília; design of remedial works for the same building;

- design of several drilled-shaft retaining walls (highest wall was 8 m high); - design of soil and rock anchors; - design of micropiles; - design and interpretation of load tests (three instances, two in Porto Alegre, one

in Brasília, Brazil) for drilled shafts ranging from 50 to 80 cm in diameter. Consulting for ICF Kaiser Engineers, a major U.S.-based consulting company. Assessment of the

validity of data from large-strain crosshole seismic tests and seismic cone penetration tests, and interpretation of results (1994).

ICF Kaiser Engineers, a major U.S.-based consulting company (with Dr. Vincent P. Drnevich, P.E.). Consulting on issues of site characterization for a power plant (1996).

ISMES, a large Italian research/consulting, mixed-capital company in Italy. Interpretation of calibration chamber tests (1993).

Participant in a team led by Douglas Environmental, an Indianapolis-based company, bidding for work on seismic slope stability studies in El Salvador (2000).

Member of ACI Comm. 336, which allows interaction with designers and builders of shallow and deep foundations.

Consulting for Alatec-Proes, a Spanish consulting company, on the stability of a caisson for a major European port (2001).

Consulting on the seismic stability of a parking garage on the Purdue Univ. campus (2003). Consulting for Traylor Brothers, Inc. on the sinking of a caisson for a major bridge (2003-2008).

34

Developer of software for analysis and design of foundations and slopes Consulting for the Town of Munster: member of consulting board construction in charge of

intervention in a clubhouse and an outdoor amphitheater near the site of a closed landfill in that have undergone substantial movement both horizontally and vertically (2012-2013)