WILLIAMS-WHITE 1000-T, Down Acting,Hydraulic Press, 20" Stroke, 60" D/C, 60HP, 2 Ram CylindersLAKE ERIE 1000-T Capacity Solid Frame,Maximum 18" Stroke, 36" Daylight,Speed Approach 1000 IPM, Pressing 200IPM, Return 1000 IPM; Bed Area 48" LRx 48" FB, Equipped With 60 HP MotorDriven Vickers Pump with Accumulator.H.P.C. 200-T Mdl. 167-1 Hydraulic Press,Four post, Bar Cutoff Press, 6" Max.Stroke, 22" Daylight, 16" Closed Hight,Cylinder 12" Dia., Non-Guided, Bed Area23" L-R Between Posts X 26" Bed F-B,36" Overall Bed Area L-R, Post (Columns)5" Dia., Equipped With Self-Containd 30HP Motor Driven Pump.MODERN (M&N) Four Column HydraulicHobbing Press, Mdl. 1A-200 Upstroke, 8"max. Stroke, 3-3/4" Dia. Columns,Operating Pressure 4000 PSI, 1 GPM.Bed and Ram Area 18 1/2" X 18 1/2",Distance Between Columns Diagonally22", Die Area Enclosed. 3HP AC 3/60/220-440 Motor Driven Hydraul ic Pump.WATSON STILLMAN 200-T, Four ColumnHydraulic Press, Vertical, Double Acting,Self-Contained, with 10" MaximumStroke, 14" Ram, Bed 30" X 28-1/2", withAir Cushion and AC Motor Drive Pump.HARTUP 150-T Mdl. LH-380 HydraulicShimmy Trim Press, Bed Area 30" X 30".Bolster Size 32-1/2" LR X 43" FB.Equipped with 15 HP AC 3/60/220-440Moter Driven Hydraulic Pump.

HYDRAULIC PRESSES

DANLY 100-T Capacity (150 Ton Frame)Mdl. H2-100, 48X36 SS/ DC /SA HighSpeed Press, 2" Stroke , 13" Shutheight,250 SPM, 3" Adj, Die Area 48" X 30" ,Flywheel Drive, Air Clutch, 20HP 3 /60 /460 Motor Drive.V & O #5 OBI Single Crank Press, 56 T-Capacity, 1-1/2" Stroke , 200-440 SPM,9-5/8" Shutheight, 3-1/2" Adjustment,Throat 2-1/2", Bed Area 32" LR X 15-1/4"/ 10-1/2" FB , Bolster 2-1/2", WidthBetween Uprights 19", Bijur Auto Lube,Front Tierods, Equipped withCounterweighted Eccentric Shaft ForHigh Speed, Bijur Automatic Lubrication,& Wichita Air Clutch, Direct Flywheel V-Belt Motor Driven with 5 HP AC 3/60/220-440 Variable Speed Drive.

HIGH SPEED PRESSES

NIAGARA 150-T OBI/SC/SBG Press, Mdl.M-150, 6" Str. , 22 1/2" S.H., Speed 35-70SPM, Bed Area 50" X 30" , Flanged Slide34" X 24", (2) 4" Bolster Plates,Counterbalanced Ram, Air Clutch, DirectV-Belt Motor Driven with 15 HP AC3/60/220- 440 Variable Speed Motor Drive.VERSON 150 -T , 8 1/2 OBI Single Crank,Single Geared Press, Stroke of Slide 8",Shutheight 25", Adjustment 4" byWrench, Strokes Per Minute 35, ThroatDepht 16" , Bed a 50" LR x 32" FB, 4"Bolster Plate, Opening in Bed 23" x 23",Flanged Slide 30" LR x 28" FB , equippedwith Air Clutch and Brake , AirCounterbalanced Slide, and 28.4 TonCapacity Air Cushion. Gears are enclosedand running in lubricant. Direct V-BeltMotor Driven with 15 HP AC 3/60/220-440 Motor and Control.BLISS 75-T Mdl. #C-75 OBI/ SingleCrank/ Single Geared Press, 6" Stroke,Shutheight 16" , Bed Area 36" x 24",Slide Area 22" x 18" , Air Clutch, Direct V-Belt Motor Drive with 7 1/2 HP AC3/60/220-440 Motor.

OBI SC GEARED PRESSES

NIAGARA 75-T Mdl. E75, Open BackInclinable Press, Single Geared, equippedwith 4" Stroke, 15-3/4" Shutheight, 4"Slide Adjustment, 54 SPM, Bed Area 36"LR x 24" FB, Slide Area 24" LR x 18" (66mm./2.6" Dia. Shank Hole in SolidSlide/no die clamp), Air Clutch, AirCounterbalance, Direct V-Belt MotorDriven with 7-1/2 HP AC 3/60/230-460(1740 rpm) Motor.2-BLISS 60-T MDL C60B OBI / SINGLECRANK / SBG PRESS, 6" Stroke Of Slide,16" Shutheight, 3" Slide Adjustment, 40-8- SM, Bed 35" x 33", Slide 20" x 15,Equipped with Air Clutch and Brake, AutoLube, Dual Palm Buttons, Feed Pedal,Ånd Direct V-Belt Motor Driven with 7 /2 HP.BLISS 60-T Mdl. C60 OBI/SC/SBG Press,Stroke 4", Shutheight 14 1/4", 70 SPM,ADJ. 3", Bd 36" x 1", Slide 17" x 12", 3"BP, Single Geared, Air Clutch, 5 HP AC3/60/230/460 Motor Drive.USI-CLEARING 60-T Mdl. 60 Torc-Pac,Open Back Single Crank Inclinable PowerPress, 6" Stroke, 18" Shutheight 90 SPM,19 Throat Depth, 3" Adjustment, Bed 32"LR x 21" FB, Bed Opening 16" LR x 12"FB with 17" Dia. Intersecting Circle,Flanged Slide 24" LR x 16" FB, 3" BolsterPlate,Auto Lubrication,Air Counterbalance,AirClutch, Torc-Pac Geared Trasmission,Direct V-Belt Motor Driven with 5HP AC3/60/220-440 Motor and Floor-mountedOperator's Pushbutton Control Stand.NIAGARA 60-T Mdl. AF4 OBI/SC Press, 6"Stroke, 16" Shutheight, 3" Adjustment,40-80 SPM, 2" x 2" Bed, 3" Bolster {late,Flywheel Drive, Air Clutch, Direct V-BeltMotor Drivn with 5 HP AC Varible SpeedMotor And Controls.ROUSSELLE 60-T Mdl. 6 OBI Single CrankPress, Stroke 5", Shutheight 10 1/2" (121/2"Dia.), Opening In Back 16", Depth OfThroat 0 1/2 ", Strokes Per Minute 50, AirClutch, Single Geared, Direct V-Belt MotorDriven with 5 HP AC Motor.V&O 60-T Mdl. 60-S OBI Single CrankPress, 6" Stroke, 15 1/2" Shutheight, 3"Adjustment, 18" Depth Of Throat, 24"Opening Between Housings, Bed Area37" L-R x 32" F-B, 4080 SPM, FlangedSlide, Air Clutch, Single Geared, Direct V-Belt Variable Sped Motor Driven withFront Mounted Palm Button Controls.

MINSTER 75-T, OBI Single CrankFlywheel Press, Mdl. 7F, 4" Stroke, highFrame with 15" Shutheight To Bed, BedArea 36" L-R X 24" F-B, Bed Opening 19"L-R X 14" F-B with 16" DiameterInteresecting Circle, 3 1/2" Bolster,Flanged Slide 30" L-R X 24" F-R, 90 SPM,Air Cluch, Direct V-Belt Motor Driven with7 1/2 HP AC 3/60/220-440 Motor andControl, Also Weld-O-Tron Sentry Controland Link-Logic #3000 System Monitorwith Brake Monitor and Timing Signal.BLISS 35-T Mdl. C-35 OBI FlywheelPunch Press, Stroke Of Slide 3",Adjustment 2-1/2", Shutheight 10-3/4",Throat 8-1/2", Bed Area L To R 26-1/2",Front to Back 17", Two Hand Controls,Bijur Lubrication Systems, Air Clutch.

OBI/SC/FLY PRESSES

STRAIGHT SIDE DOUBLECRANK PRESSES

NIAGARA 90-T Straight Side DoubleCrank Press, Mdl. PN-90-72-30 Single(Enclosed) Geared, 3" Stroke, 14"Shutheight, 5" Motorized SlideAdjustment, 35 SPM, Sized of Bed,Bolster and Slide 72" LR x 30" LR withFront to Back Tee-Slots in Bed and Slide,15 1/2" Dia. Opening in Bed and Bolster,with Automatic Bijur Lubrication,Enclosed Gearing Running in Lubricant,Air Counterbalance, Air Clutch, and DirectV-Belt Motor Driven with Motor andControls. Controls Equipped with 14Position Selector Switches andPushbuttons, with Front Crossbar-Mounted Palm Button Contorls.ROUSSELLE 80-T Straight Side DoubleCrank Press, Mdl. 8SS-80, 6" Stroke, 14"Shutheight, 55 SPM, Bed Aread 78" LR x30" FB, Bed Opening 65" LR x 14" FB,Width Between Uprights 80", SingleGeared, Twin End Drive, Equipped with AirClutch and Direct V-Belt Motor Drivenwith 7-1/2 HP AC 3/60/208-220-440 Motor.WARCO 65-T Straight Side, Double CrankPress, Mdl. 65-2-60C, Equipped with 5"Stroke, 14" Shutheight, 60 SPM, Bed Area60" LR x 30" FB with 4" Bolster, SlideArea 60" LR x 28" FB, Side FrameWindows 15" F-B, 6" Riser in SideFrames, Single Back Geared, Single EndDrive, Air Clutch, Direct V-Belt MotorDriven with 10 HP AC 3/60/230-460Motor and Controls.WARCO 60-T Straight Side, Double CrankPress, Mdl. 60-2-60C, Equipped with 8"Stroke, 20" Shutheight, 6" ADJ., 60 SPM,Bed Area 60" LR x 30" FB with 3" Bolster,Side Frame Windows 15" F-B, SingleBack Geared, Single End Drive, Air Clutch,Direct V-Belt Motor Driven with 7 1/2 HPAC 3/60/230-460 Motor and Controls.

BLISS Plunger 80 T #31/2 Single CrankDouble Action Toggle Drawing Press,Blankholder 54-T, Bed Area 26" FB x 25"LR, 26" Between Housings, 3" Bolster, 2"Ramplate on Blankholder, Stroke ofPlunger 14-1/2", Stroke Of Blankholder8", Will Draw and Lift Out Up to 6", PositiveBottom Knockout, Single Geared, Equippedwith Air Clutch, Direct V-Belt Motor Drivenwith AC Motor. Front Palmbuttons.

TOGGLE DOUBLE ACTIONPRESS

V & O 27-T OBI/Single Crank/SingleGeared, Dial Feed Press, Mdl. 2, Equippedwith 3" Stroke, 2 1/2" ADJ., Bed Area 21"LR x 12" FB, Slide Area 9" LR x 7" FB, 3"Bed Bolster, 1 1/2" Dial Plate Bolster, 10-5/8" Between Housings, Equipped withTwelve Station Dial Feed with 14" DIA.Dial And 10 1/2" Dial Station Centerline,Air Clutch, Direct V-Belt Motor Drivenwith 2 HP AC 3/60/220-440 Motor.AIR-HYDRAULICS INC. Pneumatic, Multi-Press-Type C-Frame Dial Feed Press,Mdl. C-300, 6" Gap, Mounted On FloorStand, Equipped with 6-Station x 14"Diameter Dial Feed.

DIAL FEED PRESSES

HERLAN, Mdl. P5 Horizontal Toggle LeverType Extrusion Presss with Air Clutch,12" Stroke Of Slide, 70 SPM, MotorDriven Rotary Hopper Feed Of Slugs,Automatic Lubrication, 7 1/2 HP AC MotorDrive. Press Equipped with Herlan 6-Spindle Rotary Trimmer For TrimmingEnds of Extruded Tubes.FERRACUTE 75-T Mdl. DDG-5 DoubleAction, Stroke Per Minute Min.48, Adj. ofRam Down 3, Open Height 15-1/2, Stroke3-1/2, Shutheight 12", Opening in Bed F-B, R-L-14, Air Clutch.

EXTRUSION PRESS

HORN PRESSES

YODER Coil Cradle, 0"-18" W. x 36" O.D.,Equipped with Adjustable Insert SideHousings for Coil Widths from 0"-18",and Coil Diameters Up To 36", with CoilsSupported by Two Rollers.

COIL CRADLE

REGAL 10,000 LB. Combination CoilCradle, Mdl. 3277-CC-CSF-48 with Series330 Regal Coil Feeder and Straightener,48" Coil Width, 60" Coil OD, Max. StockThickness .060", Variable ProductionSpeed to 80 FPM, Power Adjustment ofCoil Width to 48", Coil Supported andDriven by Powered Rolls 4" DIA., Feeder-Straightener (Regal Series 330) has Frontand Back Pinch Rolls 4 1/2" DIA., andSeven Straightening Rolls 3 1/4" DIA., allRolls Induction Hardened PrecisionGround Alloy, Feed Line Height Approx.33", Air Operated Pinch Rolls, PoweredLife of All Upper Pinch and StraighteningRols for Die Piloting, 5 HP AC VariableSpeed Drive & Controls. Overall Size: 89"FB x 144" LR. Weight 6350 LB.

COIL CRADLE &STRAIGHTENER

COE Mdl. 1500 LB. Mdl. CPR.DE.1512,Double End Payoff Reel, Coil ID Range 12"-20", 18" Width, w/2-1/4"+4" Wide Keepers.

COIL REELS

LITTELL Variable Speed Straightenerwith Cluth-Brake Assembly, .62"Thickness x 30" Width, Mdl. 432-7PD,Feed Line Height 42", Equipped with OnePair of Pinch Rolls 4 1/2" Dia. x 32 1/2"Width, Seven Straightening Rolls 3-1/8"Dia. x 32 1/2" Width, Loop Control Arm, 5HP AC 3/60/20/. Variable Speed MotorDrive for 20-120 FPM.FEED LEASE CORP Pneumatic SlideFeed Mdl. FL-2, 24" Width x 35" Stroke,Right-to-Left Direction, Equipped withSmooth Anvils, Conveyor Rollers,Adjustable Cylinder, Right Angle StrokeAdjustmnet, Stock Guide, and Cabinet Base.

STRAIGHTENER & FEED

WATERBURY Eleven Roll Straighteningand Feeding Machine, Equipped with OnePair Pinch Rolls, Nine Straightening Rolls.with Variable Speed Drive in Cabinet BaseMax .061" X 6" Width, Min. .010" x 6" Width.

ROLL STRAIGHTENING

COOPER-WEYMOUTH 0.10" To .093 ParthStraightener, Mdl. V8-17, (Comparable ToModel 8SPS) Stock Width 8". withSeventeen Straightening Rolls and TwoPair of Pinch Rolls. Rolls are 1 1/4" Dia.on 1 1/2" Centers, Minimum Part Length3". Also Equipped with Loop Control forHandling Straightening of Thin Coil Stock.Cabinet Base Mounted on Rollers, 3/4 HP AC.

STRAIGHTENER

B&K Rollformer, Mdl. 1-1/2 B, 36"Rollspace , Vertical Space 4-2/4"-7-1/2",Horizontal Space 14", Shaft 2-12", 10HPVari-Speed, Six Stands, s/n 133.YODER 100 F.P.M., Roll Former, Mdl. M2,Eight Stand, Roll Shaft 2" Diameter , 13"Roll Space , Horizontal Centers BetweenRolls 15",Unequal Gearing with GearRation Top to Bottom 1.33, Direct V-BeltMotor Driven with 30 HP AC3/60/230/460 Motor Driven Louis AllisAdjustopede Drive.DUPLEX Roll Former, 6 to 36" Rollspace,2" Shafts, Vertical Space 4", HorizontalSpace 6", Vari-Speed Drive, 20 HP.ASE Roll Former, Mdl. Salem Line, OR, 11Stands, 12" Roll Space, 6" to 9" VerticalAdj., 14" Horizontal Distance, 2" Shafts,20 HP 3 PH220/440, Consisting of:Uncoiler, Air Ram Pre Punch, Servo FeedDrive, Air Ram Cut Off.ENGEL Roll Forming Machine, Mdl. 825,8-Stand, 6-3/4" Roll Space, 1" Dia.Arbors, 20 GA. CAP., HCL 5", VCL 2-1/2",Needle Bearings, Main HousingAluminum, Direct Chain Motor Drivenwith 3 HP AC Motor.YODER Rollformer 9 Stand (on 15 StandBase), 6" Roll Space, 8" HorizontalCenters,5-1/2" Vertical Centers,1-1/2" Shafts.

ROLL FORMING

WALLACE COAST Mdl. 100-6 CNC 6" IPSSchedule 80 Carbon Steel Pipe Maximum,36" Radius Maximum, 195 DegreeMaximum Bend, Wgt. 16,000 Lbs. (Tooling:6 1/2"OD x 30" R., 6"OD x 18" R., 5 1/2"ODx 24"R., 5 1/2"OD x 15"R., 5 1/2"OD x 13"R., 5"OD x 22"R., 4 1/2"OD x 12"R., 4"OD x10"R., 3 1/2"OD x 14"R., and 3"OD x 7"R.)STRUTHERS-WELLS 24" Hydraulic DoubleWing Tangent Bender, Mdl. 24-BDX-2,Duplex, Radius Bending Wings 85 to 105,Maximum Width OD Material 24", Gauge ofMaterial Full Width 14 Gauge, Radius ofBends-Metal Thickness of 2", HolddownStroke 10", Motor 7-1/2 HP 3/60/220-440,with Pulpit Control.FELDMAN INC. Tangent Bender, Mdl. DH-24x48, Dougle Wing, Material 24" Max,Adjustable To 48" Max. Width, MaximumGauge 14, Pedestal Controls, 7-1/2 HP. S#1452.WILHELM SCHAFER 6' x 3/16" [2000 mm x4.5 mm], Four-Roll Initial Type Bending Roll,Mdl. SVRM, with Tapered Top Roll 5" Dia. To4" Dia. to Facilitate Cone Rolling (ForConventional Rolling the Outside End ofLower Roll is Raised to Accomodate Taper),Lower Roll 6 1/2" DIA., with AngularlyAdjusted Front and Back Bending Rollswhich are 6" Dia. all Roll Positioning byHydro Norma/Rexroth Motor DrivenHydraulic System. Remote Control StandConsists of Rolling Pedestal Mounted PulpitControl Including Instantaneous Forwardand Reverse, Roll Positioning, HydraulicDrop End Housing. Rolls are Direct MotorDriven by In-Line Gearmtor Drive with ACMotor and Controls with UniversalConnectors From Drive to Rolls. EntryTable--for Support of Material Being Rolled.

BENDERS

CINCINNATI 700-T Mdl.15-12-7 DeepDrawing Hydraulic Pressure, 12" MaxDraw Depth, 10" Max. Punch DIA.,736,000 LBS. Max Punch Force, UpperRing 26" Dia., Lower Ring 12" Dia.,Distance Between Post F-B & L-R, 3/8"Max. Back Gauge,180 Cycles Per HourMax. Operating Rate, Floor Mounted.CINCINNATI 225-T Series 9 Press BrakeAuto Cycle, Overall Die Space 12',Distance Between Housings 10'6", Stroke3", Ram Adjustment, Power 5", ThroatDistance 8", Die Space SDAU 12", AutoCycle Rapid Speed To Low Form Speed,Rapid Speed return, Flush Floor Design,Press Brake Includes Four Way Die PlusAssorted Tooling.1980 AMADA 8' x 110-T Hydraulic PressBrake, Mdl. RG-1-S, Equipped with DRCSingle Axis Gaging System, MaximumBending Length 102.4", Distance BetweenUprights 80.8", Stroke Length 3.937",Open Height 13.79", Equippped with 3Cylinders, Table Speed Approach Speed(inch/sec.) 2.3, Bending 0.40, Return 2.05;Main Motor Size 19.0 Gal. Wgt 13,200 LBS.2-CHICAGO 25-T Hydraulic "Speedibender"Mdl. 104-SBA Press Brake with Auto-Shift4-Way Powered Die Positioning, 10'Overall Length Of Dies, Maximum 90Bending Rating OVer 7/8" Die Opening: 10'x 16 Gauge, 6' x 14 Gauge; Hemming andFlattening Capacity 10' x 20 Gauge.Variable Stroke Length From 1/2" to 9-1/2" Die Space, 20 Footswitch Acutuationof Auto-Shift Die Positioning,"Inch" and "Run".

PRESS BRAKE

PYRAMID 3/8" x 10' Plate Bending Roll,Top Roll 9-1/5" Dia. Lower Rolls 8" Dia.,10' Length Of Rolls, with Manual ScrewDrop End, 25 HP 3/60/220-440 Motor Drive.

PLATE BENDING ROLL

FEMCO Hydraulic Gap Shear, Mdl.MS3010DFZ, 10' x 1/4" , HydraulicHolddowns, 36" Front Operated PowerBack Gauge, 12" gap, Adj. Stroke,Control, 22-35 SPM, Blade Clearance Adj.Control, Material Support Switch, 46 1/4"Extension Squaring Arm, Light BeamGauge, Finger Guard, Scrap Chute, and15.5 KW (20 HP) 3/50/60/200V AC MotorDriven Hydr. System with ProgrammableControls, with Footpedal.NIAGARA Underdrive Mechanical Shear,Mdl. 76B, 6' x 1/4" , Equipped withHolddown, 24" Precision Back Gauge, 6'Squaring Arm,Two Front Arm Supports,Gijur Lube, 5 HP AC 3/60/220-440 MotorDriven Through Sealed Gearcase with AllGears Running in Oil.LODGE & SHIPLEY 12 GA. MS, "SpeedShear," Mdl. 2CT40, with 10" Depth OfThroat, Two Adjustable Holddowns,Finger Bar, Work Chute, 20" FOBG, WorkTable 12 1/2" x 61",Bijur Lube, Motor andControls with Selector Switch, SingleStroke and Continuous Run Buttons.NIAGARA 10 GA. M.S. Circle Shear, Mdl.31, Blank Size 6" to 70" Diameter, Throatin Shear 18" Long, Cutter Diameter 2-15/16", Direct V-Belt Motor Driven with 3HP AC 3/60/220/440 Motor, with 6" Dia.Air Cyl. for Work Clamping, 9" Dia. AirCylinder for Cutter Feed, with Air FootPedal, which Operates Clamp, Gauge,And Cutter.

SHEARS

STRIPPIT Super 30/30 Single HEADPunch 30-T, Throat 30", CAP. 40" X 44",Duplicator, 3 1/2" And 1 1/4" ToolHolders, Footpedal, Tooling.

PUNCH

CINCINNATI Bickford Drill Type SuperService Plain, Mdl. 2E, Size 3', 11" COL.

RADIAL ARM DRILL

CINCINNATI Mdl. 2510, 3/8" x 10',Squaring Shear, Power Equipped withSquaring Arm, 2 Front Support Arms, 36"Front Operated Power Back Gauge with"Fine" and "Rapid Traverse" Features,Light Guage, Hydraulic Holddowns, AirActuated Mechanical Clutch, and DirectV-Belt Motor Driven with 15 HP AC3/60/220-440 Motor. Also Equipped withCincinnati Mdl. 2CV10 Stacker/Conveyor.CINCINNATI Mdl. 1812, 1/4" x 12' PowerSquaring Shear, 5/16" Rake, HydraulicHolddowns with Ring Guards, TwinCounterbalances, Automatic Lubrication,Finger Guards, 24" Front Operated PowerBack Gauge, Two Fron Gauge SupportArms, Light Beam Gauge, Sheet Stacker,Direct V-Belt Motor Driven with 10 HP AC3/60/220-440 Motor Drive and Controls.

GARDNER Hand Operated SurfaceGrinder, Mdl. 618, with 6" x 18" WalkerCeramax Electric Magnetic ChuckMounted on 5" x 32" Table Surface,Maximum Wheel Size 7" DIa. x 1 1/4"Bore. Bijur Manual Lubricator. SpindleDrive 1 HP AC 3/60/230-460 (3440 RPM)Motor Drive.THOMPSON Surface Grinder, with TableSIze 12" x 24", 6" x 18" Magnetic Chuck,9" Dia. x 5/8" Wheel (Will Handle 12" DIa.Wheel), 9" Height, Spindle Drive Motor 1-1/2 HP AC 3/60/220.ABRASIVE Hand Operated SurfaceGrinder, Mdl. 1 1/2, with 6" x 12" CERE-MAX Permanent Magnetic Chuck, and 1HP AC 3/60/220-440 Motor Driven Spindle.K.O. LEE Universal Tool & Cuttter Grinder,Mdl. B300, Hand Operated, Table Size 3-5/8" x 22-5/8", with B943 Toolholder, andB955 Combination Internal Grinder andMax. 6" Dia. Wheel Grinder, for ID/ODCylindrical Grinding. Spindle Drive: 1/2HP AC 3/60/220-440 (3450 RPM) Motor.K.O. LEE Tool & Cutter, Mdl. B800-1-52,with 5-1/2" x 26" Table (WorkingSurface) with 15 Degree Swivel EitherSide of Center, Double SIded 1/2 HP AC3/60/220 Utility Grinding Head for Two 6"DIa. Wheels, Mounted on 4" Dia. ColumnHaving 360 Degree Rotation For Full Useof Both Grinding Wheels, #BA940 Collet-Type Work-Head with #B942 MicrometerAdjustment Universal Swivel Base,Mounted on Table. Machine HasHandwheels for Crossfeed, TableTraverse and Vertical Movement.CLAUSING Hydraulic OD & ID CyingricalGrinder, Mdl. 4256, Max. Grinding WheelSize 10", Spindle Motor 1-1/2 HP,Grinding Diameter 3-1/2", Swivel Table4-1/4" x 28-1/4" (70 Swivel Either Way),Table Travel 1/4" To 14", Head Equippedwith Rockwell Precision Super 65Internal Grinding Attachment For Max. 1-1/4" Dia. x 3/8" Width, Max. Cutter Sizes3/8" x 1", Shank Size TO 1/4".

GRINDERS

2-WATERBURY FARREL 3/8" x 3"Inclined Thread Roller, Mdl. 20, Equippedwith Automatic Vibratory Feed, and 7 1/2HP AC 3/60/220-440 Motor Drive inCabinet Base.WATERBURY FARREL Vertical ThreadRolling Machine, Mdl. 10, 1/4" Dia. x 11/2" Length of Thread, Die Pocket Size 1-3/4" x 5". Direct Motor Driven with 3 HPAC 3/60/220-440 Motor.WATERBURY FARREL Inclined ThreadRolling Machine, Mdl. 0, 5/32" Dia. x 3/4"Length of Thread, AC Motor Drive Enclosedin Cabinet Base. Rotary Hopper Feed.

THREAD ROLLING

TOKYO Super Twin Head Automatic NutTapping Machine, Mdl. 6, with TwinHopper Feed and Magnetic ChipSeparator for Simultaneous HorizontalTapping of Hexagon and Square Nuts,DIrect V-Belt Motor Drive of Transmissionin Machine Base. Push Button Control Panel.

TAPPING MACHINE

OLIVER 8" x 9" "Straitline" Cutoff Saw ,Mdl. 394DHX, (L.H.), With 24" Blade @ 2Seconds for Full Cut and Return.Equipped with Twin AIr Clamps, AIrOperated Advance of Saw Blade, 7 1/2HP AC Motor, with Direct Exhaust ofChips to OLIVER Chip/Dust Collector Mdl.496, with 2 HP 3/60/440 Motor. AlsoEquipped with 12' Infeed Table and 20'Outfeed Conveyor.PORTER MACHINE CO. Straight LineRadial Cutoff Saw for Use in Cutting OffMaterial in Production Setup, Maximum18" Swing, Adjustable Height, BevelAttachment, 5 HP AC 3/60/220 3600 RPMMotor Driven Spindle.

CUTOFF SAWS

ETNA Two Die Rotary Swager Mdl. 306,Equipped with Hydraulic Feed and LargeAssortment of tooling. Machine willHandle Tubing 3", Solid Bar 1 1/2, Lengthof Die 6", No. of Rolls 20, Roll Diameter2-23/32". Die Width 4 1/2", DieThickness 3 1/4", RPM 165, Height toCenter 42" Direct V-Belt Motor Drivenwith 25 HP AC 3/60/220-440 Motor andControl. Wgt Apx. 18,000#

SWAGER

DOALL 36" "Metalmaster" VerticalBandsaw with Dial Chart for ContourSawing, Band Filing and Band Polishing,Equipped with 30" x 30" Adjustment BevelTable, 36" Throat Depth, 12" HeightCapacity, with Built-In Welding andGrinding Attachment Provided with WeldSelector Switch for Narrow, Medium andWide Blades, also 1/4 HP AC GrindingWheel, "Speedmaster" Variable SpeedControl and Low/High Range Selector, forSpeeds From 50 FPM to 1600 FPM, 2 HPAC V-Belt Variable Speed Drive.

BANDSAW

PINES "DYNA CUT" Automatic Tube CutoffMachine, Mdl. 30, 1/2" to 3" OD Tubing x.125" Wall Thickness Adjustable Feed Rolls,with Dual Shear Cutting Action, Round,Square, Rectangular or Shaped Tubing InSteel And Non-Ferrous Metals, Equippedwith Loader/Feeder For Continous Flow ofTubing to the Cutoff Machine.ARDCOR 60-T Mdl. KW 60-3-50, Bed Area50" Left to Right, 34" Front to Back 3"Stroke, (s/n UF 585) I-106067TISHKEN 10-T Mdl. CO24-HWAA-73, BedArea 28" Left To Right, 24" Front to Back, 2-1/2" Stroke, 200 SPM, 7-1/2 HP, Air Clutch,s/n 10427-364.CONTINENTAL 2" Tube, Rotary Knife TubeCutoff, Mdl. 2H, 1 HP AC 3/60/220-440Gearmotor Drive, Handlever Pressure Action.

TUBE CUTOFF

LAKE ERIE 1000-Ton Hydraulic Press

H.P.C. Hydraulic Press, Mdl. 167-1

MODERN Hydraulic Press, Mdl 1A-200

WATSON STILLMAN Hydraulic Press

HARTUP Hydraulic PressMdl. LH-380

DANLY High Speed PressMdl. H2-100 V & O Single Crank Press, Mdl. 5 NIAGARA OBI PressMdl. M-150

VERSON 8.5 OBI Press

BLISS OBI Press, Mdl. C-75

NIAGARA OBI Press, Mdl. E75 BLISS OBI Press, Mdl. C60B BLISS OBI Press, Mdl. C60USI-CLEARING OBI

Press, Mdl. 60 NIAGARA OBI Press

Mdl. AF4

ROUSSElLLE OBIPress, Mdl. 6 V & O OBI Press, Mdl. 60-S MINSTER OBI Press, Mdl. 7F BLISS OBI Press, Mdl. C60

BLISS OBI Press, Mdl. C-60 NIAGARA OBI Press, Mdl. AF4NIAGARA OBI Press

Mdl. AF4S ROUSSELLE OBI Press, Mdl. 6

JOHNSON OBI/SC PressMdl. 45W-AC

BLISS OBI Flywheel PressMdl. C-35

NIAGARA SS/DC Press, Mdl. PN-90-72-30 ROUSSELLE SS/DC Press, Mdl. 8SS-80WARCO SS/DCMdl. 60-2-60C

WARCO SS/DCMdl. 65-2-60C BLISS SS Press, Mdl. 3.5

V & O #2 OBI PressMdl. 2 HERLAN Extrusion Press, Mdl. P5 WARCO 50-T

Horn PressBLISS 22-T HornPress, Mdl. AB22

COIL REGAL Coil Cradleand Straightener

Mdl. 3277-CC-CSF-48LITTELL Straightener, Mdl. 432-7PD

FEED LEASE CORPFeed, Mdl. FL-2

WATERBURY RollStraightening andFeeding Machine

COOPER-WEYMOUTHParts Straightener

Mdl. V8-17ENGEL Roll FormingMachine, Mdl. 825

10:30 A.M.THURSDAY,MAY30TH

7805 Paramount Blvd.Pico Rivera, CA

7805 Paramount Blvd.Pico Rivera, CA

Plant Closed! Everything SellsPlant Closed! Everything Sells

Visit Us On the Web:www.biditup.net

Phone: 1-800-BIDITUP • FAX: 818-508-3025email: info@biditup.net

MAJOR MACHINERY AUCTIONMAJOR MACHINERY AUCTION

YODER Roll Former, Mdl. M2 CINCINNATI Power Squaring Shear , Mdl. 1812STRUTHERS- WELLS HydraulicDouble Wing Tangent Bender,

Mdl. #24-BDX-2

WILLIAMS WHITE 1000-THydraulic Press

2,000,000 DOLLAR VALUATION!2,000,000 DOLLAR VALUATION!

SOLD VIA PHOTO

CALL TO INSPECTSOLD VIA PHOTO

CALL TO INSPECT

2 Weeks Inspection Under PowerStarting Monday, May 13th

9:00am - 4:00pm Daily.

FABRICATION EQUIPMENT,WIRE MACHINERY, BRAKES,SHEARS &PRESSES

FABRICATION EQUIPMENT,WIRE MACHINERY, BRAKES,SHEARS &PRESSES

THINKING OF HAVING AN AUCTION?NEED AN APPRAISAL?

KNOW OF A PLANT CLOSURE?CALL: (818) 508-7034 EXT. 12

WARCO 50-T Horn Press, Mechanical,Single Action, Single Crank, 4" Stroke, 50Strokes Per Minute, 12" Stroke Height-Stroke Down Adjust Up. Motor Data: 5 HP,3/60/220/440 Vac, 3 Phase, 60 Hertz,950/1150 RPM.BLISS 22-T Horn Press Mdl. AB22, Stroke3", Bed Area 24" LR, 14" FB, Slide Area 11"LR, 9" FB.

Phone: 1-800-BIDITUP • FAX: 818-508-3025email: info@biditup.net

SOLD VIA PHOTO

CALL TO INSPECT

CINCINNATI 700-T Hydraulic Press Brake, Mdl. 12-15-7

Industrial Assets, Inc.11426 Ventura Blvd. Second FloorStudio City, CA 91604Asa Marshall, Auctioneer, GA Lic. #1605

THOMAS FOUNDRYLATE MODEL FOUNDRY EQUIPMENT & MACHINE SHOPJUNE 11 • BIRMINGHAM, AL

McNALLY MANUFATURINGMULTI-MILLION DOLLAR CNC MACHINE TOOL & FABRICATION FACILITYJUNE 13 • PITTSBURG, KS

AAA RENT ALL, INC.CONSTRUCTION & RENTAL YARD EQUIPMENTJUNE 15 • LOS ANGELES, CA

HASKELL SENATOR INTERNATIONAL, INC.MANUFACTURER OF EXECUTIVE OFFICE FURNITURE, LATERAL FILES, &FILE CABINETS,STAMPING, ROLLFORMING & FABRICATING FACILITYJUNE 18 • VERONA (PITTSBURGH), PA

MBCISTATE-OF-THE ART PRE-FAB METAL BUILDING, STUD & TRACK MFG.JUNE 20 • HUSTON, TX

NO LONGER REQUIRED IN THE ONGOING OPERATIONS OF: KURT MANUFACTURING CO.LATE-MODEL NEW BRITAIN SCREW MACHINES & CNC MACHINING FACILITYJUNE 26 • COON RAPIDS, MN

VERSON WHEELONFLUID FORMING PRESSESJULY 9 • LOS ANGELES, CA

#1#2#3#4#5#6#7

UPCOMING AUCTIONSUPCOMING AUCTIONS

2 Weeks Inspection Under PowerStarting Monday, May 13th

9:00am - 4:00pm Daily.

2 Weeks Inspection Under PowerStarting Monday, May 13th

9:00am - 4:00pm Daily.

DIRECTIONS

Sale Conducted by: Industrial Assets, Inc., Subject to ourcustomary terms of sale, (Available at the auction site onthe day of the sale), and any and all amendments and mod-ifications announced by the auctioneer at the time of theauction. The auctioneer and seller make no warranties orguarantees, expressed or implied, as to the defects in orthe correctness or accuracy of the descriptions in anyadvertising of any item(s) being auctioned and will not beresponsible for any advertising discrepancies or inaccura-cies of any kind. All items sold will be on an “AS IS”,“WHERE IS”, and “WITH ALL FAULTS”, basis “WITHOUTEXCEPTION” and “WITH REMOVAL AT BUYER’S RISK ANDEXPENSE”. AUCTIONEER AND SELLER MAKE NO WAR-RANTIES OR GUARANTEES OF ANY KIND, EXPRESSED ORIMPLIED AS TO THE NATURE, QUALITY, VALUE OR CONDITIONOF THE ITEM(S) BEING AUCTIONED OR ITS (THEIR)SUITABIL-ITY FOR ANY USE. AUCTIONEER AND SELLER EXPRESSLYAND SPECIFICALLY DISCLAIM WITHOUT LIMITATION ANYWARRANTY OF MERCHANTABILITY OR FITNESS FOR A PAR-TICULAR PURPOSE. AUCTIONEER SHALL NOT BE LIABLE

FOR SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES.It shall be the buyer’s obligation to verify information anddescriptions of property prior to sale. Industrial Assets,Inc., and its advertising agency assume no liability forerrors or omissions in this brochure. The auctioneer doesnot warrant the age,accuracy, genuineness, authenticity,description, weight, count or measure of any listings spec-ified herein. Although it is not likely, auction sales are sub-ject to cancellation or postponement, and sometimes itemsare withdrawn from the sale, kindly contact IndustrialAssets, Inc., prior to travel as there will be no reimburse-ments. On the day of the sale, all successful bidders mustimmediately pay the full purchase price in cash, certifiedfunds, cashiers check, wire transfer or company checkwith a letter from the buyer’s bank guaranteeing unquali-fied payments to Industrial Assets, Inc. Your letter shouldbe similar to the following: [Mr. “Customer Name” is a cus-tomer of this bank. This bank will guarantee unqualifiedpayment to Industrial Assets, Inc. on the account listedherein up to the amount of $______. This letter is valid

until 30 working days after the auction sale.] Companychecks without letter from bank guaranteeing unqualifiedpayment will not be accepted. The failure to make paymentpromptly shall be considered default and each lot or lots sopurchased will be placed for resale. The buyer must paythe total invoice price for all the lots purchased before anyremoval can begin. All buyers must pay applicable salestax (unless evidence of exemption is provided to auction-eer’s satisfaction). Buyers are responsible for the trans-portation, associated costs and risks involved in theremoval of purchased item(s). Certain items may containresidual chemicals and/or hazardous materials. The pur-chaser(s) hereby indemnify and hold harmless the auction-eer and seller from any and all damages, claims or liabili-ty from any injuries to persons or property of any typewhatsoever caused during the sale of, during the removal,or during use or operation of the purchased item(s). If youare unable to attend, please contact us regarding placing aproxy bid. ALL ITEMS SUBJECT TO PRIOR SALE. PLEASENOTE: All sales are subject to a 10% buyer’s premium.

FROM DOWNTOWN LOS ANGELES: Take 5 FWY South to Slauson Ave. Exit East to Paramount Blvd. Turn Left to Site.

TERMS

10:30 A.M.THURSDAY, MAY30TH10:30 A.M.

THURSDAY, MAY30TH

7805 Paramount Blvd.Pico Rivera, CA

7805 Paramount Blvd.Pico Rivera, CA

Plant Closed! Everything SellsPlant Closed! Everything Sells

FABRICATION EQUIPMENT,WIRE MACHINERY, BRAKES,SHEARS &PRESSES

FABRICATION EQUIPMENT,WIRE MACHINERY, BRAKES,SHEARS &PRESSES

MAJOR MACHINERY AUCTIONMAJOR MACHINERY AUCTION

BAIRD Wire Forming Fourslide, Mdl. 4-30, 1/4" Wire DIa., 1 1/4" Ribbon Stock ,Max. Feed Length 32 1/2, Direct V-BeltMotor Driven With 3 HP AC 3/60/220-440Variable Speed Motor Drive.NILSON Wire Forming Fourslider, Mdl.S4, with Two Plane Straightener, HandlesUp to 1/4" Diamete, Rated 17" StandardFeed Length. 40-125 SPM. Machine HasEnclosed Gears, Auto Lube, form Lifter,Stripper Arm, Shell Cams, Direct V-BeltMotor Driven with w/5HP AC 3/60/220-440 Reeves Variable Speed Motor Drive.BAIRD Wire Forming Fourslide with Two-Plane Wire Straightener, Mdl. 3-24, 3/16"Wire DIa., 1-1/8" Ribbon Stock Max.Feed Length 26 1/2" Feed, 3 HP AC3/60/220-440 Reeves Variable SpeedMotor Drive.BAIRD Wire Forming Fourslide, Mdl. 3,3/16" Wire Diameter, 10" Length of Feed, with Form Lifter, Variable Speed, and 5HP AC 3/60/220-440 VS. Drive.BAIRD Wire Forming Fourslide, Mdl. 2,1/8" Wire Cap., 7/8" Strip, 8" FeedLength, , 3 HP AC 3/60/220-440 ReevesVariable Speed Motor Drive.NILSON Combination Press And FourslideMachine, Mdl. S-2-F, 1/8" Wire Diameteror 1 1/2 Ribbon Stock Width, 10" Lengthof Feed, Stroke of Press 7/8", 12-T PressCapactiy, Speed Ranged 65-194 SPM,Direct V-Belt Motor Driven with 2 HP ACReeves Variable Speed Motor Drive.2-NILSON Wire Forming Fourslide, Mdl.S2F, 1/8" DIa. Wire, Max. Lgth. Of Feed10", Stroke: Front Slide 1 1/4", SideSlides 1-7/8", Back Slide 1 1/4", OpeningIN Bed 5--3/4" x 4-3/4", Speed RangesSPM 50-155, Wire Line Hgt. 36-5/8", With3 T Press Attachment, 6-1/8" Diespace.Motor"2 HP AC 3/60/220-440, EquippedWith Split Cams. Approx. Wgt. 2205 LBs. New 1962.R&K (AMERICAN CAN) Heavey DutyAutomatice Multiple Wire FormingMachine (Not a Fourslide), Mdl. 521,which Feeds, Bends, Forms, and Cuts OffAdjustable Lengths of Wire 1/8"DIameter. Machine Equipped with Two-Plane Ten-Roll Straightener with Quick-Clamping on Front and Top StraighteningRolls, One Pair of 4" DIA. Feed Rolls(which by Segment Gear Drive Halt WireInfeed During the Forming Processes),Three Bending Rolls in the Forming Area,and Five Cam-Actuated Bending,Forming & Cutoff Slides which Shape andCut Off the Formed Piece. Motor is 11/2HP AC 3/50/220-440 Gearmotor WithChain Drive.2-BAIRD Wire Forming Fourslide, Mdl. 1,3/32" Wire Diamter x 6" Length of Feed,Equipped with Air Clutch, Form Lifter, TwoPlane Straightener, Direct V-Belt MotorDriven Including 1 HP AC Variable SpeedMotor Drive.NILSON Combination Press And FourslideW/ Press Attachment, Mdl. S-0-F, 1/16"Wire Dia., 1" Ribbon Stock, 6" FeedLength, 1 1/2" HP AC 3/60/220-440Reeves Variable Speed Motor Drive.NILSON Wire Forming Fourslide, Mdl. S-0, 1/16" Dia. Wire, Max. Lgth. of Feed 6",Stroke: Front Slide 5/8", Side Slides 1-1/8", Back Slide 7/8", Opening in Bed 4-3/4" x 4-3/4", Speed Ranges SPM 95-290, Wire Line Hgt. 35-3/8", Motor: 1 1/2HP AC 3/60/220-440. Equipped with SplitCams. Apx. Wgt. 1515 Lbs.

WIRE FORMING

SLEEPER & HARTLEY Series 676Universal Segment Type Wire SpringCoiler Mdl. 1 1/2, Wire Size Range from#21 (.031") to #11 (.120"), Wire Feed 56",I.D. of Springs 1/4" to 2", Production Rate40, 60 or 90 Springs Per Minute, DirectMotor Driven with 5 HP AC 3/60/220-440 Motor.SLEEPER & HARTLEY Wire SpringCoiling Machine, Mdl. 666, Universal WireSIze #27 (.018") - #14 (.080"), Wire Feed48", Spring ID 1/8"-1", with Feed Rolls 3"DIA. x 1/2" Width, Direct Motor withReeves Variable Speed Drive.NATIONAL Automatic Spring CoilingMachine, Mdl. HTC, with TorsionAttachment; Capacity: Wire Diameter0.008"-0.055", Maximum O.D. 1.18",Wire Feed 0-31", 0-55", 0-94";Production Rate 30-100 Springs/Minute,Direct Motor Driven with 1 HP AC Motor,Equipped with Payoff Reel. HTC Automatic Spring Coiling Machinewith Torsion Attachment; Capacity: WireDiameter 0.008"-0.055", Maximum O.D.1.18", Wire Feed 0-31", 0-55", 0-94",Production Rate 30-100 Spring/Minute,Direct Motor Driven with 1 HP AC Motor,Equipped with Payoff Reel.•HTC Automatic Spring Coiling Machinewith Torsion Attachment, Capacity: WireDiameter 0.008"-0.055", Maximum O.D.1.18", Wire Feed 0-31", 0-55", 0-94",Production Rate 30-100 Springs/Minute,Direct Motor Driven with 1 HP AC Motor,Equipped with Payoff Reel.HTC Automatic Spring Coiling Machinewith Torsion Attachment; Capacity: WireDiameter 0.008"-0.055", Maximum O.D.1.18", Wire Feed 0-31", 0-55", 0-94";Production Rate 30-100 Springs/Minute,Direct Motor Driven with 1 HP AC Motor,Equipped with Payoff Reel.U.S. BAIRD "Springenerator" Wire SpringCoiling Machine Mdl. 1, Wire DiameterRange .008" to .034", Feed Range From4" to 26", Production Capacity 600 to5000, Direct Motor Driven Including 1/2HP AC 3/60/220-440 Motor.

WIRE SPRING COILER

SLEEPER & HARTLEY Series 277, WireSpring Hooker Or Looper, Wire DiameterTO .162", Floor-Mounted, with AC3/60/208-220-440 Motor Drive.SLEEPER & HARTLEY Size 1, Series 277,Universal Spring Hooking Machine.Standard Specifications: Wire Range, No.Up to No. 16 (.0625"), Coil Range O.D. Upto 3/8". Equipped with AC Motor Drive.

SPRING AND HOOKER

TORRINGTON Modular Looper, Mdl. ML-1, Wire Diameter Range .010"-.072", CoilOD Range .110-3/4", Spring BOdy Length5/16"-5", Speed Range 9-70 SPM. 3/4 HPAC Motor Drive Enclosed in Machin Base.TORRINGTON Mdl. ML-1 Modular LooperEquipped with Top-Mounted Hoper Feed,and Capactiy to Handle Wire DiameterRange .010"-.072", Coil OD Range .110-3/4", Spring Body Length 5/16"-5",Speed Range 9-70 SPM. 3/4 HP AC MotorDrive Enclosed In Machine Base.

SPRING LOOPERS

LUBOW Automatic Wire Straighteningand Cutting Machine with Head-Mounted, Enclosed 5 HP AC 3/60/220-440 Motor, Five DIe Rotary Spindle forHigh Speed Straightening, One Pair PinchRolls, 4 Ft. Cutoff Bar Equipped withThree Longitudinal Slots for HandlingVarious Sizes for Wire: (1) #3, #4, #5 (1)#10,#11,#12,(1) #13,And #14, AC Motor Drive.QUINCY World Power Series RotaryScrew Air Compressor, Mdl. QS25, 2-Pole, 3 Phase, 60 Cycles, 230-460 Volts,3470 RPM, 150# Max. Pressure, withCooling Fan.LOOPCO High Speed Roto PlugDeDimpler, Mdl. TD300HS, Capacity 1/2"-3" O.D., .025-125 Wall Thickness, Lengthup to 12" Tooling, Motor and Controls, s/n1500R86-12.FALLS PRODUCTS "D-BURR-R"Deburring Machine, Mdl. 111, Deburrsthe Bottom Edge in One Pass, Capacity24 Gauge to 1/4" Material, Width 1/2" to4' or More, Length 4" to 10 or More,Material: Steel, Stainless Steel,Aluminum, Brass, Galvanized, Perforated,Expanded Sheet Metal, Electrics: 1/4 HPGearmotor & 1/3 HP 1/60/115 BrushMotor,Size 36" Width x 26" Depth x 50" Height.DEFIANCE (Ohio Machine Tool) HeavyDuty Vertical Drill Press, Power Feed, 16"x 20" Work Surface, w/Motor DrivenCoolant, 2 HP 3/60/220-440 Motor Drive.SWAINE Double Seamer, Mdl. 2DS, forSmall Tubs, Chuck Diameter 11",Equipped with Two Opposing seamingHeads with Screw PositioningAdjustment and Air Cylinder Actuation, AirCylinder Lift ot Table, 2 HP AC 220-440Motor Drive.MILLER 200 AMP (DC) Mig Welderw/MILLER Power Cabinet, ConstantPotential DC Welder with ContinuousVariable Slope, 8KW, 8.4 KVA, 230-460V, 3PH., 21/10.5 AMP, Mounted on MobileLowbed Pallet Dolly with Chemetron WC-50-S Wire Feeder.QUINCY Mdl. QS25 World Power SeriesRotary Screw Air Compressor, 2-Pole, 3Phase, 60 Cycles, 230-460 Volts, 3470RPM,150 Lb. Max. Pressure,with Cooling Fan.LOOPCO Mdl. TD300HS High Speed TotoPlug DeDimpler, Capacity 1/2"-3" O.D.,.025-125 Wall Thickness, Length Up To12" Tooling, Motor And Controls.FA L L S P R O D U C T S " D - B U R R - R "Deburring Machine, Mdl. 111, whichDeburrs the Bottom Edge in One Press.Capacity 24 Gauge to 1/4" Material,Width 1/2" TO 4' Or More, Length 4" to 10or More. Material: Steel, Stainless Steel,Aluminum, Brass, Galvanized, Perforated,Expanded Sheet Metal. Electrics: 1/4 HPGearmotor & 1/3 HP 1/60/115 BrushMotor. Size: 36" W x 26" Depth x 50" Hgt.DEFIANCE (OHIO MACHINE TOOL) HeavyDuty Vertical Drill Press, Power Feed, 16"x 20" Work Surface, w/Motor DrivenCoolant, 2 HP 3/60/220-440 Motor Drive.SWAINE Double Seamer, Mdl. 2DS, ForSmall Tubs. Chuck Diameter 11",Equipped with Two Opposing SeamingHeads with Screw PositioningAdjustment and Air Cylinder Actuation.Air Cylinder Lift of Table. 2 HP AC 220-440 Motor Drive.MILLER 200 AMP (DC) Mig Welder w/MIller Power Cabinet: Constant PotentialDC Welder with Continuous VariableSlope, 8KW, 8.4 KVA, 230-460V, 3 PH.,21/10.5 AMP, Mounted on Mobile LowbedPallet Dolly with Chemetron WC-50-SWire Feeder.

MISCELLANEOUS

CATERPILLAR 2500 Lbs. Mdl. TC 30, s/n12X1461, Type Gas.HYSTER 12,5000 LBs. Mdl. S12S, s/nS12S APXA24D-2876V,

FORKLIFTS

TOWNSEND TRS Automaticallyy FeedAnd Set Rivets Up to 12/16" Mdl. 81,Riveter For Semi-Tubular Rivets, with theRegular Hopper and Will Handle a .160"Diameter Rivet with a Heavey Setting orUp to .200" Diameter with a Light Setting.CHICAGO Riveter On Pedestal Stand, Mdl.450-316, 1/8" Diameter Rivet, 6" ThroatDepth, Speed 300-275 RPM, HopperFeed, Palm Button Control, Direct V-BeltMotor Driven with AC Motor and Control.

RIVETERS

R&K Automatic Multiple Wire FormingMachine, Mdl. 521NILSON Press & Fourslide Machine, Mdl. S2F NILSON Wire Forming Fourslide, Mdl. S2F

BAIRD Wire Forming Fourslide, Mdl. 1

PYRAMID Plate Bending Roll

CINCINNATI Power Squaring ShearMdl. 2510 NIAGARA Underdrive Mechanical Shear, Mdl. 76BFENCO Hydraulic Gap Shear Mdl. MS3010DFZ

LODGE & SHIPLEY Speed ShearMdl 2CT40 NIAGARA Circle Shear

WILHELM SCHAFER Bending Roll Model SVRM AMADA Hydraulic Press Brake, Mdl. RG-100S CHICAGO 25 -T Hydraulic SpeedibenderPress Brake, Mdl. 104-SBA

CINCINNATI BRICKFORDDrill, Mdl. 2E

STRIPPIT SUPER Single Head Punch

K.O. LEE Tool Cutter & GrinderMdl. B800-1-52

CLAUSING CylindricalGrinder, Mdl. 4256

WETERBURY FARRELVertical Thread Rolling

Machine, Mdl. 10

WATERBURY FARRELInclined Thread Rolling,

Mdl. 0

THOMPSON SurfaceGrinder

GARDNER Surface GrinderMdl. 618

WATERBURY FARRELInclined Thread Roller,

Mdl. 20TOKYO Super-6 Twin Head

Automatic Nut Tapping Machine

PORTER MACHINE CO.Straight Line Radial

Cutoff Saw DOALL Metal Master Vertical Bandsaw

PINES Dyna-Cut Automatic Tube Cutoff Machine, Mdl. 30CONTINENTAL Rotary

Knife Tube CutoffMdl. #2H

CHICAGO RiviterMdl. 450-316 BAIRD Wire Forming Fourslide, Mdl. 4-30 NILSON Wire Forming Fourslide, Mdl. S4

BAIRD Wire Forming Fourslide, Mdl. 3-24

BAIRD Wire Forming Fourside, Mdl. 3 BAIRD Wire Forming Fourslide, Mdl. 2

BAIRD Wire Forming FoursideMdl. 1 NILSON Press & Fourslide, Mdl. S0F NILSON Wire Forming Fourslide, Mdl. S0

SLEEPER & HARTLEYUniversal Segment Type Wire

Spring Coiler, Mdl. 676

SLEEPER & HARTLEYWire Spring CoilingMachine, Mdl. 666

U.S.BAIRDSPRINGENERATORWire Spring Coiling

Machine, Mdl. 1

SLEEPER & HARTLEYWire Spring Hooker or

Looper, Mdl. 277SLEEPER & HARTLEY

Universal Spring HookingMachine, Mdl. 277

TORRINGTON Modular Looper,Mdl. ML-1

TORRINGTON ModularLooper, Mdl. ML-1

SLEEPER & HARTLEYTorsion Spring

Machine, Mdl. 607

SLEEPER & HARTLEYWire Spring Torsion

Coiler, Mdl. 281

SLEEPER & HARTLEYWire Spring Torsion

Coilier, Mdl. 73SLEEPER & HARTLEY Wire Spring

Torsion Coiler, Mdl. 731MORGAN

Pointing Machine

CATERPILLAR Fork Lift Mdl. TC 30

LOOPCO High Speed Toto Plug DeDimpler, Mdl.TD300HS

FALLS PRODUCTS DeburringMachine, Mdl. 111

SWAINE Double Seamer,Mdl. 2DS

DUPLEX Roll Former

WALLACE COAST CNC Pipe Bender

ASE Roll Former Salem Line

Industrial Assets, Inc.11426 Ventura Blvd. Second FloorStudio City, CA 91604

FABRICATION EQUIPMENT,WIRE MACHINERY, BRAKES,SHEARS &PRESSESFABRICATION EQUIPMENT,WIRE MACHINERY, BRAKES,SHEARS &PRESSES

BUILDING SOLD! • LOST LEASE! • MUST VACATE!

•THINKING OFHAVING ANAUCTION?•NEED AN

APPRAISAL? •KNOW OF A

PLANTCLOSURE?

•THINKING OFHAVING ANAUCTION?•NEED AN

APPRAISAL? •KNOW OF A

PLANTCLOSURE?

Call:Call:

(818) 508-7034

Ext. 12

(818) 508-7034

Ext. 12

19802 AVAILABLE

INDUSTRIAL ASSETS, INCTel: 1-800-BIDITUP

FAX: 818-508-3025www.biditup.netemail: info@biditup.net