Trend thermAL® Hybrid

Hinged DoorTECHNICAL DATA

Trend thermAL® Hinged Door | TAHD | Mk-1 | 30 Nov 2012

Features & Benefits

Size Range

Ordering Details

Installation

Cross Sectional Views

1Confidentiality Notice: This document and the information it contains are copyright and confidential to

Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.

2Please note that drawings are not to scale

Trend thermAL® Hinged Door | TAHD | Mk-1 | 30 Nov 2012

Features & BenefitsTrend thermAL® Hinged Door

Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.

1 Glazing Trend thermAL® is designed to

accommodate up to 24mm double glazed units for maximum energy efficiency. With over 60 different glazing options there is a solution for any climate in Australia.

Among the lowest U-Values and SHGC available but at a significantly lower cost when compared to similar systems.

U-Value down to 2.5 SHGC range from 0.53 - 0.30 Cooling Efficiency 67% Heating Efficiency 52%

2 Composition Aluminium external surface for

maximum strength which can be powder coated in a range of standard and designer colours for a bold external finish

Rigid polymer ERP is available in 3 standard steadfast colours to complement internal finishes with a subtle appearance but complementing the external finish.

Rigid polymer ERP internal surface designed to reduce energy transfer for highest energy efficiency

Rigid polymer ERP is impact modified to ensure minimal damage even during construction.

Rigid polymer ERP is pre–stressed to eliminate excessive shrinkage or expansion and is also UV stabilised to withstand the harsh Australian climates

3 Locks Trend thermAL® Hinged Doors are

fitted with a 3 point patio deadlock for security.

4 Hingeds The door is hung on special offset

fast-fix Hingeds to eliminate binding. The door can also be supplied with Parliament Hingeds where the door is to swing out flush to brickwork.

5 Direction of Opening The door can be ordered as open

in or open out.

6 Safety Glazing Toughened Safety A Grade glass

with a visual motif at the mid point to provide added safety.

7 Frames Maximum Door Height 2400mm Maximum Door Width 980mm

8 Optional Insect Screen Door Flyscreen door available

9 Options Wide range of powdercoat

finishes available including timber powdercoat finishes.

ERP Colours Anodic Natural Matt White Matt Stone Beige

10 Protective Wrapping Protective wrapping for delivery

to site is a standard for all Trend thermAL® products.

Bushfire Protection

Xtreme® bushfire protection that has

been tested by CSIRO to BAL–40,

which is fully compliant to AS1530.8.1

within AS3959–2009 is available.

Size RangeTrend thermAL® Hinged Door

3Please note that drawings are not to scale

Trend thermAL® Hinged Door | TAHD | Mk-1 | 30 Nov 2012

Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.

All windows and doors are designed to 700pa velocity and 200pa water rating. For higher ratings consult Trend® Windows & Doors

STUD OPENIN

G

DOOR SIZE

2105

OI &

OO

2168

777

850

877

950

1299

1364

1499

1564

1699

1764

TAHD2107

720Leafs

TAHD2108

820Leafs

TAHD2113

620Leafs

TAHD2115

720Leafs

TAHD2117

820Leafs

Max

imum

Fra

me

Hei

ght 2

400m

m

620, 720 & 820 DOOR LEAF

Ordering DetailsTrend thermAL® Hinged Door

4Please note that drawings are not to scale

Trend thermAL® Hinged Door | TAHD | Mk-1 | 30 Nov 2012

Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.

All doors are illustrated as viewed from outside.

Codes shown are for plain doors. The first two numbers of code indicate approximate height, the last two numbers indicate approximate width.

Manufactured from aluminium and Rigid Polymer extrusion.

Sash Style Options:Standard option, eg door code TAHD2107

Configuration Options:E = Xtreme bushfire door (placed at the end of the code)

Pa refers to Pascal rating (wind pressure)

Option:Sidelite and Highlites available

General:Black hardware is supplied as standard

Aluminium exterior and Extruded Rigid Polymer (ERP) interior. ERP interior skin is available in three colours - white, anodic natural matt and stone beige.

The aluminium sill and external brick skin must be separated with an isolator to prevent possible reaction between brick and mortar and the aluminium frame which can lead to crevice corrosion.

Note:For information on different glass types or wind ratings, plase contact a Trend Windows & Doors sales representative.

InstallationTrend thermAL® Hinged Door | Building In Detail | Brick Veneer - 230mm wall

5Please note that drawings are not to scale

Trend thermAL® Hinged Door | TAHD | Mk-1 | 30 Nov 2012

Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.

SILL BRICK

FIXINGS AT 450mm CTRS

PACKING BY BUILDER

FLASHING BY BUILDER

FLASHING BY BUILDER

CONCRETE SLAB

OPTIONAL NAIL FIX TO SLAB

PACKING BY BUILDER

HEAD

No Packing12mm CLEARANCE

TRIMMERHEADER

FLASHING BY BUILDER

TIMBER REVEAL

TIMBER ARCHITRAVE BY BUILDER

SILL

SOFFIT LINING

QUAD BYBUILDER

10mm CLEARANCEBETWEEN SOFFIT LINING AND DOOR HEAD

FRA

ME

SIZE

TIMBER REVEAL

STU

D O

PEN

ING

= F

RA

ME

SIZE

+ 6

0mm

FRA

ME

SIZE

STUD

25

107,6

24,8

9

31,8

4

107,6

107,6

OUTSIDE

6Please note that drawings are not to scale

InstallationTrend thermAL® Hinged Door | Building In Detail | Double Brick - 280mm wall

Trend thermAL® Hinged Door | TAHD | Mk-1 | 30 Nov 2012

Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.

PACKING BY BUILDER

SILL BRICK

CEM

ENT R

END

ER

OPTIONAL NAIL FIX TO BRICKWORK

SILL

BRICKWORKBRICKWORK

STEEL LINTEL BY BUILDER

FRA

ME

SIZE

HEAD

FLASHING BY BUILDER

BRICKWORK

FLASHING BY BUILDER

FRA

ME

SIZE JAMB

BUILDING IN LUGS AT450mm CENTRES

BRICKWORK

BRICKWORK

FLASHING BY BUILDER

CEM

ENT R

END

ER

25,0

2

107,6

24,8

9

107,6

107,6

31,8

4

OUTSIDE

7Please note that drawings are not to scale

InstallationTrend thermAL® Hinged Door Window | Building In Detail | Aluminium Cladding on Studs

Trend thermAL® Hinged Door | TAHD | Mk-1 | 30 Nov 2012

Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.

PACKING BY BUILDER

12mm CLEARANCEANGLE TRIM BY BUILDER

FLASHING BY BUILDER

FLASHING BY BUILDER

FLOOR JOISTFLOOR JOIST

ALUMINIUM OR VINYLWALL CLADDING

OPTIONAL NAIL FIX TO FLOORING

FLOORING

SILL

TIMBER REVEAL

TRIMMERHEADER

TIMBER ARCHITRAVE BY BUILDER

NO PACKINGFR

AM

E SI

ZE

STU

D O

PEN

ING

= F

RA

ME

SIZE

+ 6

0mm

FLASHING BY BUILDER

STUD

STU

D O

PEN

ING

= F

RA

ME

SIZE

+ 6

0mm

ALUMINIUM OR VINYLWALL CLADDING

107,6

25,0

2

OUTSIDE

24,8

9

107,6

31,8

4

107,6