hs week 3 blended learning

8
Welcome to Health & Safety Week 3 Please put your bags on the floor Have a notepad, pen and textbook ready Have your ID badge visible

Upload: clarksonn

Post on 14-Aug-2015

245 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Hs week 3 blended learning

Welcome to Health & Safety Week 3

Please put your bags on the floorHave a notepad, pen and textbook

readyHave your ID badge visible

Page 2: Hs week 3 blended learning

Aim

• To look at fire fighting equipment, sterilisation methods and prepare for exams 201/202/203

Page 3: Hs week 3 blended learning

Objectives

• Describe different fire fighting equipment• Discuss salon hygiene• Identify different methods of sterilisation and

sanitisation

Page 4: Hs week 3 blended learning

Fire Fighting Equipment Task• Research the different types of extinguisher• State the colour and uses• Water• Foam• Carbon Dioxide• Dry Powder

• Extension task…Explain how it works/limitations

Page 5: Hs week 3 blended learning

Salon Hygiene As a Therapist salon hygiene is good practice for your

own health, your clients’ health and your colleagues health

Beauty Therapy treatments demand close human contact, so care must be taken to provide the maximum protection against cross-infection

Micro-organisms – are organisms that are too small to be seen by the naked eye, they can cause different

types of infection

Page 6: Hs week 3 blended learning

Controlling Micro-organisms in the Salon

• Antiseptic - chemicals which destroy the growth of micro-organisms on living tissues, helping to prevent infection

• Autoclave – a piece of equipment that is used to sterilise small metal equipment. It works by heating distilled water under pressure to a higher temperature than 100 Degree Celsius

Page 7: Hs week 3 blended learning

Controlling Micro-organisms in the Salon

• Barbicide – a blue liquid chemical that kills bacteria but not necessarily the spores, so reproduction may still take place

• Ultraviolet cabinets – UV cabinets use an ultraviolet light to destroy bacteria the tools we use. Tools have to be clean and dry before putting into the cabinet, and turned regularly because the rays only clean the surface of the tool