howtoconnectx-litetogsmgateway

How to Connect X-lite to GSM Gateway

http://www.dinstar.com 1 / 9


Version: 1.0

Dinstar Technologies Co., Ltd.

Date: 2014. 06.16



Contents

1. Introduction ............................................................................................................................. 3

Related Gateway Series............................................................................................................ 3

Related Firmware Versions ....................................................................................................... 3

2. Xlite Settings ........................................................................................................................... 4

2.1 Download and install xlite ............................................................................................. 4

2.2 Enable UDP ports in your firewall................................................................................ 4

2.3 Start to configure SIP account ..................................................................................... 4

2.4 Add a SIP account ......................................................................................................... 4

2.5 Configure SIP account information ................................................................................... 5

2.6 change default SIP port of xlite .......................................................................................... 6

3. Outbound call setting of GSM gateway .............................................................................. 7

3.1 Add an SIP trunk .................................................................................................................. 7

3.2 Enable Peer to Peer parameters ....................................................................................... 7

3.3 Configure outbound call routing......................................................................................... 7

4. Inbound call setting of GSM gateway ................................................................................. 8

4.1 Modify default inbound routing .......................................................................................... 8

4.2 configure Tel-> IP Operation rule ....................................................................................... 8

4.3 Configure destination number ............................................................................................ 8

5. Make outbound and inbound calls ....................................................................................... 9

5.1 Make outbound call ....................................................................................................... 9

5.2 Make incoming call to xlite ........................................................................................... 9



1. Introduction

The DWG SIP/GSM Gateway from Dinstar is a cost-effective SIP/GSM gateway for SOHO,

SMEs and system integrators, and also opens up new revenue generating opportunities for

service providers. The GSM gateway allows a SIP based IP PBX telephone system or VoIP

line to be connected directly to the GSM cellular network, which can dramatically lower the

cost of mobile calls by taking advantage of lower mobile-to-mobile tariffs.

Related Gateway Series

DWG2000-1G

DWG2000B/C/D

DWG2000E/F/G

Related Firmware Versions

Product Name Firmware Versions

DWG2000-1G 2.20.01.03 above

DWG2000B/C/D 2.22.07.03 or 2.23.07.03 above

DWG2000E/F/G 2.23.08.01 above

Target

1. Make outbound calls from xlite to GSM gateway via SIP trunk directly

2. Make incoming call from GSM gateway to xlite

Description

IP address of xlite: 172.16.221.221

IP address of gateway: 172.16.222.22



2. Xlite Settings

2.1 Download and install xlite

Download X-LITE 3.0 and install it:

http://www.counterpath.com/

Edit.... new link is: http://www.counterpath.net/x-lite.html&active=4

2.2 Enable UDP ports in your firewall

You might have to open the following ports in your router/firewall:

UDP 3478

UDP 5060

UDP 8000

UDP 8001

2.3 Start to configure SIP account

Open X-LITE and click on the small down arrow and then on SIP Account Settings:

2.4 Add a SIP account

Click on Add button:



2.5 Configure SIP account information

In the Account tab, enter your account information:

a. Display name : Your user name, Tim as exmaple

b. User name : Your user name, 1000 as example

c. Password : Your password, can be null for peer to peer call

d. Authorization user name : your user name, 1000 as example



e. Proxy : IP/Domain name of GSM gateway, 172.16.222.22

f. Domain Proxy:none

g. Register with domain and receive incoming call: disable

2.6 change default SIP port of xlite

Change the local SIP port to 5060 under Topology tab. Xlite will generate random SIP port by

default.

Click OK to save the setting.



3. Outbound call setting of GSM gateway

3.1 Add an SIP trunk

IP Trunk Configuration-> IP Trunk, add a SIP to xlite, the IP is the PC that installed xlite

3.2 Enable Peer to Peer parameters

System configuration\service Parameter

Allow Call from GSM to IP without Registration: Yes

Allow Call from IP to GSM without Registration: Yes

3.3 Configure outbound call routing

Modify default routing rule under Routing configuration-> IP->Tel Routing page.

Source IP: IP 0 that added under IP Trunk page

Source and destination prefix: any, any is wildcard prefix to match all number

Destination to port 0

*Notes: DWG2000-1G without this option



Till now, x-lite would make outbound calls through GSM gateway successful.

4. Inbound call setting of GSM gateway

4.1 Modify default inbound routing

Modify the default Tel->IP Routing under Routing Configuration-> Tel->IP Routing page.

Destination IP0 is the IP trunk to x-lite.

4.2 configure Tel-> IP Operation rule

Enable auto call to xlite under Operation\Tel->IP Operation page, click ADD button to create

new rule.

4.3 Configure destination number

Under System Configuration -> Port Parameter page,1000 is the extension number of

x-lite.



5. Make outbound and inbound calls

Enable CDR before call testing under Statistics->CDR page, enable CDR and save the

setting.

5.1 Make outbound call

Dial the destination number 10086 as example with xlite, you could see the status

under system information page during call progress.

To check CDR after conversation

5.2 Make incoming call to xlite

Make a call to the SIM card, you will be heard ringback tone on your mobile meanwhile

xlite will ringing.

< The end>

howtoconnectx-litetogsmgateway

Documents