how to update bios for win8
DESCRIPTION
updating biosTRANSCRIPT
How to Update BIOS for Win 8
BIOS Part, PC Development Group
Samsung IT Solutions Business
2012.11.14
ContentsContents 1. Phoenix BIOS
2. AMI BIOS
3. Slate PC : XE500T1C
1. Phoenix BIOS1. Phoenix BIOS
(1) UEFI Shell – BIOS Update
(2) DOS – BIOS Update
(3) Windows – BIOS Update
4
• Boot to UEFI Shell 2.0
2.0 Shell>fs0: 2.0 FS0:\>eSFlash.efi /n /s /file P04ABH.cap
5
• BIOS Updating
2.0 Shell>fs0: 2.0 FS0:\>eSFlash.efi /n /s /file P04ABH.cap
Samsung-Phoenix SCT Flash for Shell V1.3.25.13-1.2, Build 120901 Copyright (C) 2011-2012 Phoenix Technologies Ltd.
SecureFlash BIOS detected Read BIOS image from memory. Initialize Flash module. Read current BIOS.
WARNING: System is going to shutdown and do capsule update!
6
• After Restarting , Capsule Updating
Samsung-Phoenix SCT Flash for Shell V1.3.25.13-1.2, Build 120901 Copyright (C) 2011-2012 Phoenix Technologies Ltd.
Read BIOS image from memory. Initialize Flash module.
Programming MICOM ……… Total blocks of the image = 737 . |---+----+----+----+----+----+----+----+----+----+ **************************************************. Image flashing done.
Programming BIOS ……… Total blocks of the image = 768 . |---+----+----+----+----+----+----+----+----+----+ *********************
7
• Change BIOS Setup Option - SecureBoot Option : Disabled
Phoenix SecureCore Tiano Setup
SysInfo Advanced Security Boot Exit
Aptio Setup Utility - Copyright (C) 2012 American Megatrends. Inc.
Item Specific Help▶ Boot Device Priority
Touch Pad Mouse [Enabled] Select system boot options Secure Boot [Enabled]
Internal LAN [Enabled] PXE OPROM [Disabled] Smart Battery Calibration
Boot
Phoenix SecureCore Tiano Setup
F1 Help ↑↓ Select Item F5/F6 Change Values F9 Setup DefaultsEsc Exit ←→ Select Menu Enter Select ►Sub-Menu F10 Save and Exit
88
Phoenix SecureCore Tiano Setup
SysInfo Advanced Security Boot Exit
Aptio Setup Utility - Copyright (C) 2012 American Megatrends. Inc.
Item Specific Help▶ Boot Device Priority
Touch Pad Mouse [Enabled] Select system boot options Secure Boot [Disabled] OS Mode Selection [CSM OS]
Internal LAN [Enabled] PXE OPROM [Disabled] Smart Battery Calibration
Boot
Phoenix SecureCore Tiano Setup
F1 Help ↑↓ Select Item F5/F6 Change Values F9 Setup DefaultsEsc Exit ←→ Select Menu Enter Select ►Sub-Menu F10 Save and Exit
• Change BIOS Setup Option - OS Mode Selection : CSM OS
9
• Boot to DOS
Microsoft (R) Windows 98 (C)Copyright Microsoft Corp 1981 – 1998.
C:>dSFlash /n /s /file P04AB.cap
10
• BIOS Updating
Microsoft (R) Windows 98 (C)Copyright Microsoft Corp 1981 – 1998.
C:>dSFlash /n /s /file P04AB.cap
Samsung-Phoenix SCT Flash for Shell V1.3.25.13-1.2, Build 120901 Copyright (C) 2011-2012 Phoenix Technologies Ltd.
SecureFlash BIOS detected Read BIOS image from memory. Initialize Flash module. Read current BIOS.
WARNING: System is going to shutdown and do capsule update!
11
• After Restarting, Capsule Updating
Samsung-Phoenix SCT Flash for Shell V1.3.25.13-1.2, Build 120901 Copyright (C) 2011-2012 Phoenix Technologies Ltd.
Read BIOS image from memory. Initialize Flash module.
Programming MICOM ……… Total blocks of the image = 737 . |---+----+----+----+----+----+----+----+----+----+ **************************************************. Image flashing done.
Programming BIOS ……… Total blocks of the image = 768 . |---+----+----+----+----+----+----+----+----+----+ *********************
• Boot to Windows 7 or 8
13
• BIOS Updating
14
• After Restarting, Capsule Updating
Samsung-Phoenix SCT Flash for Shell V1.3.25.13-1.2, Build 120901 Copyright (C) 2011-2012 Phoenix Technologies Ltd.
Read BIOS image from memory. Initialize Flash module.
Programming MICOM ……… Total blocks of the image = 737 . |---+----+----+----+----+----+----+----+----+----+ **************************************************. Image flashing done.
Programming BIOS ……… Total blocks of the image = 768 . |---+----+----+----+----+----+----+----+----+----+ *********************
2. AMI BIOS2. AMI BIOS
(1) UEFI Shell – BIOS Update
(2) DOS – BIOS Update
(3) Windows – BIOS Update
16
• Boot to UEFI Shell 2.0
2.0 Shell>fs0: 2.0 FS0:\> amiflashefi.nsh P01AAA.cap /n
17
• BIOS Updating
********************************************************************** * SAMSUNG ELECTRONICS Rev. 0.2 * * * * After finish the update, Press any key to restart * **********************************************************************
2.0 FS0:\> AfuEfix64.efi P01AAA.cap /n /b /p /e /r+-----------------------------------------------------------------------------------------+: AMI Firmware Update Utility v.3.02.00 :: Copyright (c) 2012 American Megatrends Inc. All Right Reserved. :+-----------------------------------------------------------------------------------------+ Reading flash . . . . . . . . . . . . . . . . . . . . . Done Secure Flash enabled, recalculate ROM size with signature…. - FFS checksums . . . . . . . . . . Ok Erasing Boot Block . . . . . . . . . . . . . . . . . done Updating Boot Block . . . . . . . . . . . . . . . . done Verifying Boot Block . . . . . . . . . . . . . . . . done
18
• Change BIOS Setup Option - SecureBoot Option : Disabled
SAMSUNG BIOS Configuration
SysInfo Advanced Security Boot Exit
Aptio Setup Utility - Copyright (C) 2012 American Megatrends. Inc.
▶ Boot Device Priority
Touch Pad Mouse [Enabled] Secure Boot [Enabled]
Internal LAN [Enabled] ↔ : Select Screen PXE OPROM [Disabled] ↕ : Select Item Enter : Select Sub-Menu Smart Battery Calibration F5/F6 : Change Opt. F1 : General Help F3 : Previous Values F9 : Optimized Defaults
Boot
19
SAMSUNG BIOS Configuration
SysInfo Advanced Security Boot Exit
Aptio Setup Utility - Copyright (C) 2012 American Megatrends. Inc.
▶ Boot Device Priority
Touch Pad Mouse [Enabled] Secure Boot [Disabled] OS Mode Selection [CSM OS] ↔ : Select Screen Internal LAN [Enabled] ↕ : Select Item PXE OPROM [Disabled] Enter : Select Sub-Menu F5/F6 : Change Opt. Smart Battery Calibration F1 : General Help F3 : Previous Values F9 : Optimized Defaults
Boot
• Change BIOS Setup Option - SecureBoot Option : Disabled
20
• Boot to DOS
Microsoft (R) Windows 98 (C)Copyright Microsoft Corp 1981 – 1998.
C:\> amiflash P01AAA.cap /n
21
• BIOS Updating
Microsoft (R) Windows 98 (C)Copyright Microsoft Corp 1981 – 1998.
C:> amiflash P01AAA.cap /n AMI Flash Wrapper v2.4 SAMSUNG ELECTRONICS (c) 2012
Now Executing : AFUDOS.exe P01AAA.cap /n /p /b /e /r +----------------------------------------------------------------------------------+ : AMI Firmware Update Utility v.3.02.00 : : Copyright (c) 2012 American Megatrends Inc. All Right Reserved. : +----------------------------------------------------------------------------------+ Reading flash . . . . . . . . . . . . . . . . . . . . . Done Secure Flash enabled, recalculate ROM size with signature…. - FFS checksums . . . . . . . . . . Ok Erasing Boot Block . . . . . . . . . . . . . . . . . done Updating Boot Block . . . . . . . . . . . . . . . . done Verifying Boot Block . . . . . . . . . . . . . . . . done
• Boot to Windows 7 or 8
• BIOS Updating
24
• After Restarting, Capsule UpdatingSAMSUNG BIOS Configuration
SysInfo Advanced Security Boot Exit
Aptio Setup Utility - Copyright (C) 2012 American Megatrends. Inc.
WARNING! System firmware is being updated. Keyboard is locked. DO NOT TURN POWER OFF ! ! ! Once firmware update is completed System will be automatically rebooted
Flash update progress 37% ↔ : Select Screen ↕ : Select Item Enter : Select Sub-Menu F5/F6 : Change Opt. F1 : General Help F3 : Previous Values F9 : Optimized Defaults
Flashing. . .
3. Slate PC – 3. Slate PC – XE500T1CXE500T1C
(1) UEFI Shell – BIOS Update
(2) Windows – BIOS Update
26
• Boot to UEFI Shell 2.0
2.0 Shell>fs0: 2.0 FS0:\> afuemmc.efi P04AAI.cap /fota
27
• BIOS Updating
27
2.0 Shell>fs0: 2.0 FS0:\> afuemmc.efi P04AAI.cap /fota +-----------------------------------------------------------------------------------------+ : AMI eMMC Update Utility v.1.0.1_.00 : : Copyright (c) 2012 American Megatrends Inc. All Right Reserved. :+-----------------------------------------------------------------------------------------+ Get ROM File Name : P04AAI.cap Saving FOTA Binary file into FS0…
28
• After Restarting, Capsule Updating
28
Now this system enters the Firmware Update Process. After updating Firmware, system will restart automatically!!! Please wait...
• Boot to Windows 7 or 8
• BIOS Updating
31
• After Restarting, Capsule Updating
31
Now this system enters the Firmware Update Process. After updating Firmware, system will restart automatically!!! Please wait...