Nota: Al seguir estos pasos usted asume toda responsabilidad de daos en su equipo

Nota: Al seguir estos pasos usted asume toda responsabilidad de daos en su equipo. Le recomiendo hacer su respaldo antes de realizar el siguiente procedimiento.

1) Primero, remueva la batera del equipo.

2) Dar doble clic en el icono de abajo.

3) Haga doble clic en el la carpeta, Winflash.

4) Haga doble clic en el archivo ejecutable, InsydeFlash

5) Windows muestra un mensaje preguntando si quiere extraer los archivos. Haga clic en Extraer todos.

6) Aparece una ventana que indica Asistente Para Extraccin. Haga clic en Siguiente.

7) En la prxima ventana dar clic en Siguiente.

8) Aparece un mensaje para confirmar, haga clic en Si.

9) En la prxima ventana dar clic en Finalizar

10) Ahora, haga doble clic en la carpeta, winflash.

11) Dar doble clic en el archivo, InsydeFlash

12) En la prxima ventana, el mensaje pregunta si desea ejecutar el archivo. Haga clic en Ejecutar.

13) En el programa que abre dar clic en Aceptar.

14) Espere que se termine el proceso de actualizacin del BIOS. El equipo se debe reiniciar al completar el proceso. Conecte la pila luego que el equipo se reinicie.

15) Si el equipo enciende pero se apaga a los 30 segundos, realic un reseteo de Poder. Favor de Remover la batera y el cable de corriente de su equipo y luego oprimir el botn de encendido por 30 segundos para descargar toda la corriente que pueda estar almacenado en el equipo. Luego, conecte solamente el eliminador de corriente y oprima el botn para encender su equipo. Luego que el equipo encienda correctamente conecte la bateria._1298881494/Winflash.zip

winflash/3309.fd

winflash/Ding.wav

winflash/FlashTester.exe

winflash/iFdPacker.exe

winflash/InsydeFlash.exe

winflash/iscflash.dll

winflash/iscflash.sys

winflash/iscflashx64.sys

winflash/platform.ini

;The file is Insydeflash utility configuration file

[Version]Version=00;Insydeflash utility will display the value at top

[FDFile]FileName=BackupName=

;FileName -> Utility always load this file.;BackupName -> Utility will backup current BIOS to the file.

[UpdateBlock]PatchFv=0FileName=intel.fvFileOffset=0FlashSize=0PhysicalAddress=FFF00000FvID=945PL-AIDErrorAction=1

;If user set PatchFv to 1, utility will go update mode.;If user only need to update some blocks in file, please enter file offset and size;in here. If flash size is 0, utility will update all binary in file.;If flag in Platform_Check section is 1, utility will compare FvID with current;platform ID. When ID comparison failed, user choose result by IDErrorAction.;1 mean show error message box, 2 mean close utility and reboot/shutdown.

[Platform_Check]flag=0PlatformName=;This flag is the switch of comparing bios project id with rom file project id.;When flag is 1, utility will check project id.If id doesn't match, utility will ;close the application. When flag is 0, utility won't check project id.;PlatformName ->check platform name by .INI

[AC_Adapter]flag=1BatteryCheck=0BatteryBound=20;This flag is the switch of checking AC. When flag is 1, utility will check AC. If no AC;plug in, utility will display warnning message. When flag is 0, utility won't check AC.

[Bios_Version_Check]flag=0

;This flag is the switch of checking Bios Version. When flag is 1, utility will ;check Bios Version. If rom file Version is older than Bios, utility will display warnning ;message and close application. When flag is 0, utility won't check rom file version.

[ForceFlash]ALL=1BB_PEI=0CPU_Microcode=0Variable=0DXE=0EC=0Password=0OEM_NVS=0Logo=0Type#09=0Type#08=0

;ALL 1 -> Flash all ROM part. 0 -> Resverd all protect areas.;BB_PEI, CPU_Microcode, Variable... ;1 -> Force flash these area if BIOS report them are protected areas. ;0 -> Protect these area if BIOS report them are protected areas.

[FlashComplete]Action=2Dialog=0Counter=15

;Action 0 -> Do nothing, 1 -> Shut down, 2 -> Reboot;Dialog 0 -> Do not display dialog, 1 -> Display dialog,; 2 -> Display dialog and wait several seconds.;If user need to reboot or shut down automaticlly in several seconds,;user can set counter be a integer.

[UI]Confirm=1Silent=0DisplayID=0InsydeInfo=1VersionInfo=1GroupInfo=1ConfirmInfo=0OnFlashingBeep=0OnFlashingBeepDelayTime=800DisableMouseAndKeyboardInput=0BeforeFlashDelayTime=0ProgramStartToWrongMessageBox=0GetFDFileButton=0

;Confirm 1 - > Display confirm dialog, 0 -> Do not display confirm dialog;Silent 1 -> Silent mode, hide main dialog, 0 -> Normal mode;DisplayID 1 -> Display BIOS ID, 0 -> Do not display BIOS ID;InsydeInfo 1 -> Display Insyde copyright information and URL, 0 -> Do not display it;VersionInfo 1 -> Display BIOS version, 0 -> Do not display BIOS version;GroupInfo 1 -> Display group box, Do not display group box;ConfirmInfo 1-> Display version and date information in confirm dialog;OnFlashingBeep 1-> Beep on flashing, 0 ->Do not beep on flashing;OnFlashingBeepDelayTime -> set BEEP delay time(Milliseconds);DisableMouseAndKeyboardInput 1-> Hook mouse and keyboard without "CTRL+ALT+DEL", 0 ->Do not Hook mouse and keyboard.;BeforeFlashDelayTime ->If user need to delay begin flashing in several seconds, user can set delay time be a integer.;ProgramStartToWrongMessageBox 1-> Display a wrong message box,0-> Do not display a wrong box;GetFDFileButton 1-> Display FD file browse box, 0-> Do not display FD file browse box

[Logo]PatchLogo=0FileName=GUID=

[Others]ClearCMOS=0FlashDevice=0DisableCompare=0ErrorRetry=0;FlashDevice 0 -> default, 1 -> SPI flash part, 2 -> Non-SPI flash part.;DisableCompare 0 -> Compare binary, 1 -> Do not compare binary, flash directly in write ROM mode.;ErrorRetry 0-> Do not retry if found flash error. 1 -> Try to flash again if write or verify error.

[Option]Flag=0

;Flag 0-> Auto-flash mode.;Flag 1-> User option mode, including option, start, exit buttons.;Flag 2-> User flash mode, including start, exit buttons.

[ApplicatonFlash]Flag=0Model=

;Some specific platforms need to flash by application. Only support 32bit Windows.;Flag 1-> Flash by application;Flag 0-> Flash by BIOS;Model is the name of the platform.

[ReturnErrorCode]FileNotFound=3ErrorBeforeFlash=4

[UpdateEC]Flag=0

;0 -> Not flash EC by BIOS. ;1 -> Flash by BIOS now.;2 -> Flash by BIOS after windows shutdown.

[Region]BIOS=0GbE=0ME=0DESC=0

[Log_file]Flag=0FileName=InsydeFlash.Log

;0 -> Not create log file;1 -> create log file

[ReturnCodeDefinition]RETURN_SUCCESSFUL=0RETURN_MODEL_CHECK_FAIL=259RETURN_USER_CONFIRM_CANCEL=1602RETURN_AC_NOT_CONNECT=1602RETURN_LOAD_DRIVER_FAIL=1602RETURN_NEED_REBOOT=3010RETURN_USER_EXIT=1602

winflash/ReleaseNotes.txt

InsydeFlash for Windows (Use IHISI)

Version 3.43------------1. Fix flash after platform can not boot to OS

Version 3.42------------1. Confirm dialog always on top

Version 3.41------------1. Fix use start button to flash fail issue.

Version 3.40------------1.Add a GET FD file button. [UI] GetFDFileButton=0

Version 3.39------------1.Add a wrong mesage box.

Version 3.38------------1.Add when error message occur , unlock keyboard and mouse2.Fix PlatformName by ini display error

Version 3.37------------1.fix "Alone Flash Region binary file" function can not flash EC.2.fix "Alone Flash Region binary file" function flash protect area issue.

Version 3.36------------1.fix "Alone Flash Region binary file" function issue

Version 3.35------------1.Add "Alone Flash Region binary file" function2.Modify "write HDCP key" function read file rule

Version 3.34------------1.Remove program window (X) button.(Beta1)2.Add Retry checking AC power function.(Beta1)3.Modify some wrong message.(Beta2)4.Add on flashing playing wav file.(Beta3)5.support IHISI function 19h(Beta4)6.Lock all input without system key("CTRL+ALT+DEL")(Beta5)7.Add check platform name by .INI function(Beta6)8.Add return code set by .INI(Beta6)9.Add a new argument(/WH) for "write HDCP key function"(Beta7)10.support IHISI 1.7.4(OEM/ODM customization-2)(Beta8)

Version 3.33------------1.Fix driver bug.2.Add /EV arguments

Version 3.32------------1.Add Disable read compare by IHISI(function 11h)2.Add new Variable(SLP2M & SLP2P)3.Add support IHISI spec 1.7.1 new feature4.Add Disable model name & Version display by IHISI(function 11h)

Version 3.31------------1.Add Display Wrong message on Dialog "Do not turn off your computer"

Version 3.30------------1.Support R3.5 code base for "patch logo function"

Version 3.29------------1.Add Region map arguments(BIOSBGbEBMEBDESC)

Version 3.28------------1.Add DLL_AP_FlashComplete function2.Add ICL50_M005_TURN_OFF_DTS3.Add APTURN_OFF_DTS4.Add AP_Read_Memory_Buffer

Version 3.27------------1.Add error code configuration.2.Add silent style in console mode (-s).

Version 3.26------------1.Add application flash (64bit)

Version 3.25------------1.Fix 64bit driver bug.

Version 3.24------------1.Add application flash (32bit)

Version 3.23------------1.Fix driver bug.2.Add retry function.3.Add read compare switch.

Version 3.22------------1.Add error return code.2.Support binary variable access.

Version 3.21------------1.Add /C arguments

Version 3.20------------1.Add UI configurations.

Version 3.19------------1.Dynamic find IHISI main function number.2.Add UI configurations.

Version 3.18------------1.Add BVDT.2.Add ID display.

Version 3.17------------1.Fix buffer overflow bug.

Version 3.16------------1.Modify iFdPacker function.

Version 3.15------------1.Add /1 /2 /4 /8 arguments.

Version 3.14------------1.Add command line argument for iFdPacker.2.Add FV ID protection.

Version 3.13------------1.Support BIOS IHISI 1.6.22.Add log file argument.

Version 3.12------------1.Add command line arguments

Version 3.11------------1.Fix UI block problem

Version 3.10------------1.Add silent mode2.Add tool: InsydeFdPacker

Version 3.06------------1.Add a key in INI for turn on/off end dialog.2.Fix file not found bug

Version 3.05------------1.Support BIOS IHISI 1.5.82.Add FV update mode

Version 3.04------------1.Support BIOS IHISI 1.5.7

Version 3.03------------1.Support BIOS IHISI 1.5.6

Version 3.02------------1.Supprt BIOS IHISI 1.5.52.Utility can covert logo image.

winflash/UNZDLL.DLL

winflash/winflash.doc

Step 1.

Put BIOS file into WINFLASH Folder.

Step2

Please touch Winflash executable file.

Step3

Choose OK to star Flash BIOS system and reboot computer after finish all commands.

winflash/ZIPDLL.DLL