How to Set Up Wood Pellets Production Line

Biomass pellets production is now a hot industry because of their low price (compared to

fossil fuels) and people’s awareness of using more environmental friendly fuel. As a

result, biomass pellets fuel has great market demand and is quite profitable.

Now there are many pellets production lines all over the world, but the pellets output still

cannot meet demand. So, people who have access to biomass raw materials and

distribution channel are aiming at setting up pellets production lines now. But as a

matter of fact, not all of them are specialists in this field. Therefore, they need some

guidance on pellets production. Take wood for example.

Wood pellets production process

Wood is a common seen pellet production raw material, which includes timber, logs,

chips, shavings or sawdust of pine, acacia, cypress, beech, oak, and so on. Generally if

your raw material is softwood, you can pelletize it without adding additive; if your raw

material is hardwood, you need to add certain amount of softwood or binder (hardwood

is comparatively difficult to pelletize).

The wood pellets production technology goes this way:

1. Raw material crushing: usually wood chips, logs or timber, etc. must be

crushed before pelletization. The reason is that these wood raw materials are large

pieces and can’t be pelletized directly. This process will need wood chipper and

hammer mill.

2. Crushed material sieving: sometimes the raw materials have impurities like

stones or metal scraps. These impurities will destroy the pellet mill. So they shall

be sieved.

3. Drying: the sawdust usually contain much water. In this case, the dryer is

indispensable. For capacity below 1ton/h, air flow dryer is enough. But for large

capacity, drum dryer is good help.

4. Wood pellets production: the wood pellet mill also has different

capacities. 50-500kg/h, use flat die pellet mill; >500kg/h, use ring die pellet

mill or multiple sets of flat die pellet mill.

5. Pellets cooling and sieving: the pellets have high temperature when

produced by the pellet mill; as a result, a cooler is needed to cool the pellets.

Besides, the counter flow cooler can also sieve the broken pellets or raw material

powder to get good quality pellets.

6. Pellet packing: to pack the wood pellets in bags will make them easy to store,

transport and sell. They can be packed into small bags and large bags.

Above is whole wood pellets production line process, and other biomass raw

materials go similar steps.

What do you need to consider before setting up biomass pellets production

line?

You funds and budget: your budget determines the pellets production line scale.

Sometimes you may want to set up a large scale one, but may not have enough funds.

In this case, you can lower your capacity, or reduce some relatively unimportant

equipment. It is not advised to replace the necessary equipment with low price and low

quality ones, otherwise you will regret.

You workshop: in fact, the funds you have also determine your workshop size. The

more funds you have, the larger workshop you can build. If you do not have

workshop, you’d better build it near your raw material. This can save you a lot of

raw material transportation cost. If you already have your own workshop, you

shall tell us your workshop height, width and length, so that we can design the

pellets production line depending on your workshop size. Otherwise your workshop may

not be enough to place the equipments.

Conclusion

Setting up a wood pellets production line is always an important decision for many

companies or investors. So the more you learn about it, the better it is. At YONGLI, you

will find professionals who are specialized in pellets production field, and they can solve

all your technical problems. Please contact shane@yongli-machine.com to build your

customized biomass & wood pellet production line.