how to choose the right glove - mallory co · pdf filehow to choose the right glove. 122...

121Phone: 800-MALLORY Fax: 360-577-4244 WWW.MALLORYCO.COM

GLO

VE

S – INTRODUCTION

GLOVES

Disposable....................................... 123.-.127Finger.Cots................................................127Chemical.Resistant......................... 128.-.133Poly./.Cotton.&.Cotton.................... 134.-.136Coated.Cotton................................. 136.-.140Cut.Resistant................................... 141.-.146Leather............................................. 147.-.149High.Temperature......................................150Welding............................................ 150.-.151Vibration....................................................152Mechanic.......................................... 153.-.157Cleanroom....................................... 157.-.158

Shoulder Length30-31”

Elbow Length14-18”

SizeTo measure your hand size, wrap a tape mea-sure around the palm at its widest point. This measurement, in inches, is equivalent to the glove size (i.e. 9” measurement = size 9)

Rolled Cuff – Gives additional cuff strength and a finished appearance. Acts as a barrier to keep chemicals from running off glove into skin.

Size.Chart. XS. S. M. L. XL. 6-7. 7-8. 8-9. 9-10. 11-12

Raw MaterialCharacteristics

Natural.Latex Neoprene Nitrile PVC

Advantages

Excellent flexibility and resis-tance to tearing, cuts.

Good resistance to numerous acids and ketones.

Precautions.for.use

Multi-purpose chemical resistance: acids, aliphatic solvents, ketones.

Performs well when exposed to sunlight and ozone.

Excellent resistance to abrasion, snags and perforation.

Excellent resistance to hydro-carbon derivatives. No natural rubber proteins.

Very good resistance to acids and bases. No natural rubber proteins.

Avoid contact with oils, grease and hydrocarbon derivatives.

Weaker mechanical resis-tance than natural latex, and nitrile.

Avoid contact with ketones and aromatic solvents.

Avoid contact with ketones, oxidizing acids and organic compounds containing nitrogen.

AbrasionCutTearPunctureOils and greasesHydrocarbonsAcidsNon Ketonic solventsKetonic solventsWashing powders, detergents

Types.of.hazard. . . The.longer.the.line,.the.greater.the.resistance.to.the.hazard.concerned.

Gauntlet Cuff – Extended length protects wrist area. Slides on and off easily. Allows for maximum movement of forearm.

Pinked Cuff – A zigzag finished appearance commonly found on knit-lined rubber gloves.

Gauge – Thickness of glove material usually measured in mils (1 mil=0.001” gauge). Lower-gauge gloves allow better dexterity and

flexibility. Higher-gauge gloves give better protection, but less flexibility.

Knit Lined – Cotton or synthetic material bonded to in side surface of glove. Absorbs perspiration, adds temperature protection.

Flock Lined – Shredded fiber, usually cotton, applied to inside surface of glove material. Absorbs perspiration. Easy on/off.

Straight Cuff – Provides a snug fit to protect from chemical runoff and skin contact.

Unlined – Gives you better sensitivity and dexterity than lined gloves. Required where particle contamination is a concern. Powdered unlined gloves make on/off easier and increase comfort.

Jersey Lined – Softest, most comfortable lin-ing. Gives additional temperature protection and greater cushioning effect.

Wrist/ Foraremlength9-14”

How To Choose The Right Glove

122 Phone: 800-MALLORY Fax: 360-577-4244 WWW.MALLORYCO.COM

INTR

ODUC

TION

–

GLO

VE

S

What To Know About Gloves

Supported.Hand.Protection.Supported gloves are great for protection against solvents and chemical resistance, abrasions, cuts and punctures. The glove shell can be dipped into a polymer or the material can be dipped into a polymer before the glove is sewn. The work applications determine which glove option is the best choice for your hand protection needs.

Styles.and.Materials.Dipped - Glove shell dipped in a polymer Neoprene - Provides greater flexibility plus comprehensive chemical protection Nitrile - Offers excellent abrasion resistance PVC - Excellent liquid and solvent protection Rubber - For applications where gripping power, cut and puncture resistance are a concern Vinyl - Breathable, easy gripping, minimizes absorption of water, oil and grease Cut-N-Sewn - Sewn from material dipped in a polymer Nitrile - Excellent abrasion resistance and dexterity Vinyl (Impregnated and Laminated) - Flexibility and mild abrasion resistance

Unsupported.Hand.Protection.Unsupported gloves are best when there is a need for greater dexterity in applications requiring mild chemical protection or a disposable glove solution. The gauge identifies the mil thickness of a glove. A thin gauge allows a sense of touch and a heavy gauge provides greater protection and durability.

Styles.and.Materials.Heavy Gauge Unsupported - 45- to 50-mil thickness Latex - Greater protection and durability Regular Unsupported - 11- to 30-mil thickness Latex - Canners and flock-lined, natural rubber, most elastic substance known Nitrile - Unlined and flock-lined, provides cut, snag, puncture and abrasion resistance better than any other rubber Neoprene - Flock-lined, resists oils and offers less hand fatigue Neoprene On Latex - Flock-lined, unique dipping process to resist specifically MEK and other ketones and acetones Neoprene Latex Blend - Flock-lined, blending of two rubbers for multi-purpose use Disposable Unsupported - 5-mil thickness Latex - Medical or industrial grade, better dexterity, elasticity, cool and comfortable Vinyl - Medical or industrial grade, durability, softness, no latex al-lergens Polyethylene - 125-mil thickness, promotes good hygiene

Cotton.Hand.Protection.Cotton gloves are a good choice for comfort and breathability in gen-eral-purpose applications and, in heavier weights, for abrasion and heat protection. Cotton gloves can also be used to protect the product as well as the hands.

Styles.and.Materials.Quilted - For heavy multi-purpose applications and added heat protec-tion Chore - General purpose work Double Palm - Minimal heat protection Hot Mill - Moderate heat protection Single Ply - For multi-purpose applications Canvas - 8-, 10- or 1-ounce fabric for general purpose work. Some styles have PVC dots to provide better gripping ability and durability Jersey - 9-ounce jersey for general purpose work. Some styles have PVC dots to provide better gripping ability and durability

••

•••

•

•••

••••

•

••

•

••

•

•

•

•••••

•

Terrycloth - 9-ounce jersey for general purpose work. Some styles have PVC dots to provide better gripping ability and durability Light Weight - For product protection Inspectors - Made with cotton or nylon, is reversible, and may also be used as gloves or liners

About.String.Knit.Hand.Protection.String knit gloves are used for general-purpose work applications and can provide cut and abrasion resistance, using high-performance yarns, to fur-ther protect the hands when working with sharp objects. Various material weights provide longer durability or additional dexterity where needed. Some styles may be dipped or coated with a polymer to provide a better grip and increase durability.

Material.Information.High-performance Yarns - For multi-purpose applications that require additional cut protection Dyneema® Knits - Excellent cut resistance Kevlar® Knits - Great cut resistance Stainless Steel - Steelcore, Steelcore II Multi-Purpose Yarns - For multi-purpose applications 100% Cotton - Absorbent and breathable Cotton/Polyester - General purpose work 100% Synthetic - Less linting than cotton

Leather.Hand.Protection.Leather gloves are best for protection from rough objects, sparks and heat, and for cushioning from blows in heavy-duty work requirements. All kinds of leather provide comfort, durability, dexterity, mild heat resistance and abrasion protection. These advantages make leather a traditional favorite for industrial workers.

Styles.and.Patterns.Leather Palms, Gunn Patterns - For protection from rough objects, sparks, heat and cushioning from blows in heavy duty work require-ments Leather Palms, Clute Patterns - Greatest economy glove offering leather protection Drivers - Allow more dexterity when operating heavy machinery and vehicles Welders - Provide protection for welding and heat applications Mig/Tig Welders - afford a fine touch in low heat applications

Types.Of.Leather.Cow - Cow leather is the most commonly used leather within the glove industry due to its plentiful availability. The United States and Australia produce the majority of these hides. The advantages include comfort, durability, excellent abrasion resistance and breathability. Chrome tan-ning of this leather provides greater wear and heat resistance. Pig - Pigskin offers the greatest breathability due to the porous texture of this hide. Additionally, pigskin tends to become softer with use and withstands moisture without stiffening. When laundered, this leather will return more to its natural soft texture than other leathers. Goat - Independent tests have proven this to be stronger and more durable leather. The natural lanolin produced by goats helps to create the softest, most abrasion-resistant leather. This leather is highly recom-mended for applications requiring tactile sensitivity.

Cuts.Of.Leather.Grain - Grain leather is the smooth external side of the hide. This type of leather provides durability and dexterity Split - Split leather is the rougher internal side of the hide. The three different types of split leather are side, shoulder or belly split Side Split - comes from the rib area of the animal. This part of the leather is more durable and provides the greatest protection because of its greater density of fibers Shoulder Split - is more economical than side, but less durable. The additional movement in the shoulder area creates fewer fibers and a more visible texture difference Belly Split - is the most economical, but has the least consistency of texture and appearance

•

••

•

•••••••

•

•

•

••

•

•

•

•

•

•

•

•


GLO

VE

S – DISPOSABLE NITRILE

N-DEX®.FreeThe world’s first accelerator-free disposable nitrile glove. 100% nitrile utility grade glove, ambidextrous. Free from the accelerators common in all disposable nitrile gloves which have been linked to workplace conditions like Type IV dermatitis. The hi-vis green color is great for jobs where increased visibility and color-coded operations are critical. Available in a smooth finish or with new textured fingertips, N-DEX Free provides laboratory, pharmaceutical, and industrial workers an accelerator-free, latex-free option with greater grip, comfort and dexterity. 9 1/2” long, 4 mil, powder free. 100 per dispenser, 20 dispensers per case. Please Specify Size: XS, S, M, L, XL

Item. Description. . 1-19. 20+7705PF 9 1/2”, 4 mil Smooth $12.00 $10.297705PFT 9 1/2”, 4 mil Textured $12.00 $10.29

N-DEX®.OriginalNitrile utility grade glove. 100% nitrile, non-latex utility grade glove, lightly dusted with USP-grade corn starch. A powder-free version is available. The Original N-DEX gloves are ambidextrous and 9 1/2” long, 4 mil thick. **8005 offers more chemical, puncture and abrasion resistance. 100 per dispenser, 20 dispensers per case. Please Specify Size: S, M, L, XL, XXL

Item. Description. . 1-19. 20+7005 9 1/2”, 4 mil. N-DEX Original $11.25 $9.646005PF 9 1/2”, 4 mil. Poweder-Free N-DEX $12.00 $10.298005 9 1/2”, 8 mil. N-DEX Plus** $14.25 $12.21

Ultimate.N-DEX®.Long.Cuff100% nitrile medical-grade long-cuffed exam glove. 100% nitrile, non-latex medical-grade glove, avail-able in low-powder or powder-free (PF), and featur-ing Best’s proprietary beaded and rolled cuff design. The Ultimate N-DEX 9905 and 9905PF are ambidextrous and 11” long, 6 mil thick.Priced per dispenser. Packed 50 pair per dispenser, 20 dispensers per case.Nitrile medical grade long-cuffed exam glove, hand-specific. The N-DEX 9005 and 9005PF are hand-specific and 11” long, 6 mil thick. Priced per dispenser. Packed 50 per dispenser, 6 dispensers per case. Both gloves are rated as a Class 1 medical device. Meets NFPA 1999 requirements for Emergency Response, and OSHA guidelines for handling chemotherapy drugs and bloodborne pathogens.Please Specify Size: S, M, L, XL (XXL available only in 9905PF)

Item. Description. . 1-19. 20+9905 11” Low-Powder $11.83 $10.149905PF 11” Powder-Free $11.83 $10.14

Item. Description. . 1-5. 6+9005 11” Hand-Specific $29.83 $25.149005PF 11” Hand-Specific, Powder-Free $29.83 $25.14

*All N-Dex gloves are in Compliance 21CFR, 170-199. Manufactured in an FDA-inspected ISO-9002 registered facility. Made in the USA.

CleaN-DEX®

Class 100 - 100% nitrile glove Compatible in all classes of cleanrooms and contain no natural rubber latex or carbamates, which can cause allergic reactions. Patented “low modulus” formulation for the most comfortable “dry end” glove or for double gloving, or under-gloving applications. Ther-mally activated, these gloves relax and conform from the heat of your hands. Offer improved puncture and chemical resistance, and are inherently more static dissipative for ESD sensitive operations than natural rubber. Cleaner than vinyl. 11” long, 6 mil thick. 50 per bag, 20 bags per case. Please Specify Size: S, M, L, XL

Item. Description. . 1-9. 10+C9905PF 11”, Powder-Free, Nitrile $16.33 $13.99

Nitrile is more puncture & abrasion resistant than latex or vinyl, and is the most

chemically resistant single-use material.

NITRI-DEX™

This unique 12”, 9 mil, Nitri-DEX glove with tractor tread grip and hand-specific design is the perfect “hybrid” to bridge the gap between chemical-resistant and disposable applications. Nitri-DEX is packaged in a poly bag that has right-hand and left-hand specific compartments. Ideal for food processing, agricultural produce, janitorial, automotive, aeronau-tics and pharmaceutical applications. Color blue. 25 pairs per bag, 6 bags per case. Please Specify Size: XS-XXL

Item. Description. . 1-5. 6+707-08 12” Nitri-Dex - Medium $20.42 $17.50

N-DEX.NightHawk®

Sleek and sophisticated, the NightHawk is an ac-celerator-free, textured fingertip, disposable nitrile glove offering the world’s least allergenic dispos-able nitrile protection. Ideal for jobs where the going gets messy or the application calls for un-compromising tactile feel and touch, NightHawk is perfect for workers in automotive, electronic assembly, laboratory, and law enforcement and security environments. NightHawk offers static-dissipative properties, and excellent protection from blood-borne pathogens where contact with body fluids may occur. 9.5” long, 4 mil thick. Sold in packages of 50. 20 pks/case.

Item. Description. 1-19.pkgs.. 20+7700PFTS Small (6-7) $6.00 $5.147700PFTM Medium (7-8) $6.00 $5.147700PFTL Large (8-9) $6.00 $5.147700PFTXL XLarge (9-10) $6.00 $5.14


DISP

OSAB

LE N

ITRI

LE •

DISP

ENSE

RS –

G

LO

VE

S

Four.Compartment.Glove.DispenserGreat for multifunction use. Store and dispense a variety of items such as wipe packets, small parts, earplugs, hair nets, finger cots or whatever best fits your needs. Hinged lid and doors.

Item. Description/Size. . . PriceAK244 4-Glove Dispenser, 16 3/4”W x 12”H x 8 1/2”D $140.00

AK244

KleenGuard™.G10..Thin.Mil.GlovesIdeal for food handling and light duty general-purpose jobs. Choose from blue nitrile or natural color, latex to suit your needs. Both styles have 9.5” beaded cuff, and textured fingertips for good grip. Sold 100 per bag, 10 bags per case. Note-XL gloves 90 pairs/bag.

Item. G10.Blue.Nitrile. . 1-9. 10+57370 Size 6-7 (XS) $8.71 $8.0257371 Size 8 (S) $8.71 $8.0257372 Size 9 (M) $8.71 $8.0257373 Size 10 (L) $8.71 $8.0257374 Size 11 (XL) $8.71 $8.02

Item. Latex,.Powder-Free. . 1-9. 10+57170 Size 6-7 (XS) $5.77 $5.3157171 Size 8 (S) $5.77 $5.3157172 Size 9 (M) $5.77 $5.3157173 Size 10 (L) $5.77 $5.3157174 Size 11 (XL) $5.77 $5.31

Item. Latex,.Light.Powder. . 1-9. 10+57270 Size 6-7 (XS) $5.67 $5.2257271 Size 8 (S) $5.67 $5.2257272 Size 9 (M) $5.67 $5.2257273 Size 10 (L) $5.67 $5.2257274 Size 11 (XL) $5.67 $5.22

Nitrilite®.Powder-Free, 100% NitrileNitrilite gloves solve many of the contamination problems caused by vinyl and natural rubber latex gloves in today’s cleanrooms. Designed specifically for critical environments, Nitrilite gloves offer significantly reduced particulate and extractable levels. They are 100% powder-free and contain no plasticizers, silicone, or pigments. Plus, the superior strength of nitrile means Nitrilite gloves can be thinner than comparable vinyl or latex gloves, which results in a lighter, more comfortable glove with improved dexterity and tactility.

Ideal for: cleanrooms, handling sensitive parts and materialsSold 50 gloves per polypack. Please Specify Size: 7 (XS), 8 (S), 8.5 (M), 9 (L), 10 (XL)

Item. Description. . 1-11. 12+93-311 5 mil, 12” length, powder-free ambi, beaded cuff, textured fingers. $15.00 $12.85

•

Touch.N.Tuff®.Premium Quality 100% Thin-Mil NitrileTouch N Tuff disposable gloves set a whole new standard in comfort, durability, dexterity, and cleanliness. Made of 100% nitrile, the gloves contain absolutely no fillers, silicones, or plasticizers. And, although they are only 4 mils thick, Touch N Tuff gloves provide three times the puncture resistance of competitive latex or vinyl gloves. 9.5 inches in length, they are available powdered or powder-free.

Ideal for: manufacturing, maintenance and cleanup, intricate parts handling, laboratory analysis/technical work, hazmat

Caution: Component materials comply with FDA regulations for food contact. TNT gloves are static-dissipative.Sold 100 per dispenser box or 10 boxes/case. Please Specify Size: 6.5-7 (S), 7.5-8 (M), 8.5-9 (L), 9.5-10 (XL)

Item. Description. . 1-11. 12+92-500 9.5” Teal, lightly powdered, 4 mil $11.70 $10.0392-600 9.5” Teal, powder-free, 4 mil $13.42 $11.50

•

NitriShield®.Non-Sterile.Nitrile.Gloves

Non-sterile industrial grade gloves in 4 and 8 mil thickness Textured finish for better grip Resistance to a wide variety of chemicals Latex Free. Ideal for: Food processing, chemical processing, handling biohazards, mail sorting, biomedical and other industrial applications needing tactile sensitivity plus puncture and abrasion resistance.

Sold 100 per dispenser box, 10 boxs/case Please State Size : S, M, L, XL.

Item. Description. . 1-11. 12+6015 Powder-Free - Chlorinated 4 mil $10.85 $10.406020 Powdered 4 mil $10.33 $9.906025 Powdered 8 mil $12.47 $11.956030 Powder-Free 8 mil $13.10 $12.60

•

••••

Trilites.984.CP..Class.10006 mil ambidextrous, design in unique tri-polymer blend of neoprene, nitrile and natural rubber provide comfort of latex exam gloves with added strength, tear resistance and chemical splash protection.Extended 11.5” length offers extra protection to hand & wrist. Textured grip with lightly halogenated finish for optimum tactil-ity and grip; wet or dry. Exclusive finish minimizes tape and label sticking to gloves. Powder-free clean process for no cross contamination. In compliance with 21 CFR, 170-199.

Applications: Laboratory Research, Light Assembly and Sorting, Preci-sion Parts Handling, Light Maintenance

Purple color, Sizes S-XL. Packaged 100 per bag, 10 per case, priced per bag.

Item. Description. . . Price98492 984 CP Class 1000 $13.83

•


GLO

VE

S – DISPOSABLE LATEX

Economy.Latex.DisposableLatex disposable gloves. Made with USDA approved materials (for safe food handling). Ambidextrous, 9”, with rolled cuff, available in lightly powdered and powder-free. Packed 100 gloves per dispenser, 10 dispensers per case. Please Specify Size: S, M, L

Item. Description. . 1-9. 10+GRDR 9”, 5 mil. Powdered $5.40 $4.90GRPR 9”, 5 mil. Powder-Free $6.23 $5.65

Derma.Thin™.

Unsupported, disposable natural rubber glove. Tactile-sensitive 5 mil Derma Thin is one of a few thin gauge dispos-able gloves still made in the USA, and surpasses similar-gauge natural rubber and vinyl gloves, in overall quality, performance and value. Derma Thin’s specially formulated, 100% natural-rubber compound features the finest quality natural rub-ber, so you get outstanding strength, wear, and dexterity in a glove that is cooler, more durable, better fitting, more sensitive and less susceptible to tearing or developing holes than similar-gauge vinyl gloves. Ergonomi-cally-designed Derma Thin is comfortable, fits well, and provides a great grip, wet or dry. Ambidextrous for economy and ease, Derma Thin is lightly powdered with USP-grade corn starch instead of talc for easy don-ning and doffing to reduce the chance of contamination. 9 1/2” in length, 5 mil thick with rolled cuff. In Compliance 21CFR, parts 170-199. Made in the USA. Packed 100 gloves per dispenser, 20 dispensers/case. Please Specify Size: S, M, L, XL

Item. Description. .. 1-19. 20+1005 9 1/2”, 5 mil, Green $8.75 $7.50W1005 9 1/2”, 5 mil, White $8.75 $7.50

Conform®.5-Mil, 100% Natural Rubber Latex Conform gloves provide the highest degree of dexterity available with the strength and comfort of 100% natural rubber latex. Component materials comply with FDA regulations for food contact. Conform gloves are available in three styles and two colors to allow you to choose the correct glove for your specific application.

Ideal for: laboratory analysis/technical work, intricate parts handling, food processing and handling, quality control, electronics assembly, light-duty maintenance and cleanup

This product contains natural rubber latex, which may cause allergic reac-tions in some individuals. 5 mil, 9-1/2”, natural, powdered, exam glove. 100 gloves/box; 10 boxes/case. Sizes: S, M, L, and XL

Item. Description. . 1-9. 10+69-210 Conform Latex gloves $6.08 $5.21

•

Conform®.XT.Disposable Natural Rubber Latex Conform XT is 100% natural rubber latex features a textured grip, and qualifies as a Class I medical device.

Ideal for: laboratory analysis/technical work, food processing and handling, quality control, electronics assembly, light-duty maintenance and cleanup

Component materials comply with FDA regulations for food contact. This product contains natural rubber latex which may cause allergic reactions in some individuals. Natural, powder-free, textured grip, 5 mil, Class I medical device 100 gloves per dispenser, 10 dispensers per case. Sizes S, M, L, XL Available in sizes: S, M, L, and XL.

Item. Description. . 1-9. 10+69-318 Conform XT Latex gloves $11.23 $9.63

•

SAFESKIN®..PFE..Powder-Free..Natural.Rubber.Latex™.Exam.Gloves.

Design: powder-free, beaded cuff, textured, ambidextrous 9.4” long Thickness: 6.7 mil (at the fingertip) 5.5 mil (palm)

100 gloves (90 for XL)/dispenser box, 10-dispenser boxes/case

Item. Description. . 1-9. 10+57110 XS $13.79 $12.7057220 S $13.79 $12.7057330 M $13.79 $12.7057440 L $13.79 $12.7057550 XL $13.79 $12.70

•

••

SAFESKIN®.LPE..Powdered.Natural..Rubber.Latex™.Exam.Gloves

9.5” long with beaded cuffSmoothAmbidextrous Thickness: 6.7 mil (at the fingertip) 5.5 mil (palm)

100 gloves (90 for XL)/dispenser box

Item. Description. . 1-9. 10+57270 XS $5.67 $5.2257271 S $5.67 $5.2257272 M $5.67 $5.2257273 L $5.67 $5.2257274 XL $5.67 $5.22

••••

SAFESKIN®.

Satin.Plus.Powder-Free.Natural.Rubber.Latex™.Exam.Gloves.

Beaded cuff, smooth, ambidextrous 9.4” long Thickness: 6.7 mil (at the fingertip) 5.5 mil (palm)

100 gloves (90 for XL)/dispenser box, 10-dispenser boxes/case

Item. Description. . 1-9. 10+SP2110 XS $8.38 $7.65SP2220 S $8.38 $7.65SP2330 M $8.38 $7.65SP2440 L $8.38 $7.65SP2550 XL $8.38 $7.65

•••


DISP

OSAB

LE L

ATEX

, VIN

YL –

G

LO

VE

S

LEX.SeriesLightly Powdered - Medical Exam10” latex, ambidextrous, lightly powdered, dispenser boxed, smooth examination gloves. Tapered, beaded cuff. Meets or exceeds FDA specs. 100 Gloves/box, 1000 gloves/case. Please Specify Size: (XS-100), (S-101), (M-102), (L-103), (XL-104).

Item. Description. . 1-9. 10+LEX 10” Latex, Lightly powdered $4.86 $4.04

Helping.Hands™.Glove.ProgramHelp fight Childhood Cancer.Each uniquely designed box you purchase will result in direct finacial support to those lives touched by childhood cancer.

PFXT.SERIESLatex Powder-Free Cleanroom Class 100 Gloves • Textured surface• Low protein and contact sensitizers• Class 100 (m3.5) clean room compat-ible or higher Controlled environments• Double chlorinated• Double bagged• Tapered, beaded cuff• 10” And 12” length, ambidextrous• Total protein content <50ug/g of glove (ppm) using modified Lowry Method• Leak tested• Meets or exceeds FDA requirements with 510(k) registration• Meets ASTM D3578-95 standards• Sampled in accordance with MIL STD-105E• Complies with U.S. Government 21 CFR 177.2600 for food handling• Qualified for use in the pharmaceutical industry 10” PFXT Series sizes – Small (1), Medium (2), Large (3), X-Large (4)12” PFXT Series sizes - Small (1), Medium (2), Large (3), X-Large (4)

Item. Description. . 1-9. 10+PFXT10* 10”, PFXT Low Powder Glove $6.58 $6.06PFXT20* 12”, PFXT Low Powder Glove $8.86 $7.91

NPX.SeriesPowder-Free Medical Exam10”, 14 mil nitrile, ambidextrous, powder-free, dispenser boxed, full tex-tured examination gloves. 100 Gloves/box, 1000 gloves/case. Please Specify Size: (XS-100), (S-101), (M-102), (L-103), (XL-104).

Item. Description. . 1-9. 10+NPX 10” Nitrile Powder-Free $10.05 $9.25NPXO 10” Nitrile Powder-Free Orange $10.24 $9.40

911A.SeriesLatex Powder-Free “High Risk” Exam Gloves12”, 14 mil latex, ambidextrous, powder-free, dispenser boxed, textured examination glvoes. Tapered, beaded cuff. Meets or exceeds FDA specs. 50 Gloves/box, 500 gloves/case. Please Specify Size: (XS-100), (S-101), (M-102), (L-103), (XL-104).

Item. Description. . 1-9. 10+911A 12” Latex Powder-Free $10.52 $9.25

LPXT.SeriesPowder Free - Medical Exam10” latex, ambidextrous, powder-free, dispenser boxed, textured examination gloves. Tapered, beaded cuff. Meets or exceeds FDA specs. 100 Gloves/box, 1000 gloves/case. Please Specify Size: (XS-100), (S-101), (M-102), (L-103), (XL-104).

Item. Description. . 1-9. 10+LPXT 10” Latex, Powder-Free $6.21 $5.72

LPX.SeriesPowder Free - Medical Exam9” latex, ambidextrous, powder-free, dis-penser boxed, smooth examination gloves. Tapered, beaded cuff. Meets or exceeds FDA specs. 100 Gloves/box, 1000 gloves/case. Please Specify Size: (XS-100), (S-101), (M-102), (L-103), (XL-104).

Item. Description. . 1-9. 10+LPX 9” Latex, Powder-Free $6.03 $5.55

We.stock.a.full.line.of.Clean.Room.gloves.and.related.products,.so.please.ask.if.you.do.not.see.what.you.need!


GLO

VE

S – DISPOSABLE LATEX, VINYL

Sensatouch™.Vinyl.and.Latex.Medical.Grade.Exam.gloves

Choose powdered or powder-free5 mil thickness Textured finish for better grip Rolled cuffs Component materials comply with FDA regulations for food contact Ambidextrous Double chlorinated where noted by suffix of DCIdeal For: clinical laboratories, nursing home care, dentistry, patient examinations, pharmacy, and veterinarians

100 gloves per dispenser, 10 dispensers per case. Sizes S, M, L, XL

Item. Description. . 1-9. 10+Medical.Grade

5000 Vinyl Powdered, Clear $5.12 $4.915010 Vinyl Powder-Free,Clear $5.64 $5.415045 Latex Powder-Free, Textured DC $8.75 $8.405048 Med,Tech Powder-Free Latex, DC 12” length, blue 50/per box $11.70 $11.245050 Powdered Latex, Clear $6.78 $6.50

••••••••

Barrier.Flat-Film, Hand-Specific, Non-Woven Liner A major breakthrough in flat-film glove technology, Barrier gloves feature a unique non-woven liner that absorbs perspiration and makes the gloves comfort-able to wear, especially for extended periods. In addition, the winged-thumb, hand-specific design provides greater dexterity. Proprietary seam-fusion technology provides a secure seal against chemicals and also assures a flexible, comfortable fit for greater dexterity and reduced hand fatigue.

Ideal for: petrochemicals and refining, chemical transport, hazmat work, aircraft and aerospace

Flat film, hand-specific, 2.5 mil 1 pair per polybag. Please state Right or Left hand and size, 6, 7, 8, 9, 10, 11.

Item. Description. . 1-9. 10+2-100 Non-woven liner $6.11 $5.24

•

Sensatouch™.Vinyl.Food.and.lndustrial.Grade.gloves

Choose powdered or powder-free5 mil thickness or 6.5 Mil

100 gloves per dispenser, 10 dispensers per case. Sizes S, M, L, XL

Item. Description. . 1-9. 10+Food.Industry.Grade.

5015 Powder-Free, Clear Vinyl $5.38 $5.165020 Powdered, Clear Vinyl $4.95 $4.755025 Powdered, Green, Vinyl 6.5 Mil $3.44 $3.305055 Powder-Free Latex, Blue, DC $8.66 $8.305060 Powdered Latex, Blue $6.26 $6.00

••

VersaTouch™.Versatile, Economical 5-mil Vinyl GlovesWhen you need economical hand/product protection, VersaTouch clear 5-mil PVC gloves are the best choice. They offer near “bare hand” dexterity and sensitivity, and are available lightly powdered or powder-free. Component materials comply with FDA regulations for food contact.

Ideal for: light manufacturing, maintenance and cleanup, painting and janitorial use

Sold 100 per box or 10 boxes/case. Please Specify Size: S, M, L, XL

Item. Description. . 1-11. 12+34-700 White, lightly powdered $5.75 $4.9334-725 White, powder free $9.00 $7.7134-775 Blue, lightly powdered $5.75 $4.93

•

Lightly.Powdered.Vinyl..DisposablesVinyl disposable gloves, lightly powdered, 12” long. Ideal for: electronics, janitorial, labs, maintenance, painting, poultry and meat handling, and seafood process-ing. Packed 100 gloves per dispenser, 10 dispensers per case.Please Specify Size: S, M, L, XL

Item. Description. . 1-9. 10+V1000 12” Powdered Vinyl Disposable $5.04 $4.34

Finger.Cots3 mil white latex. Finger cots provide low cost, convenient protection when whole hand coverage is not needed. Static dissipative. Available rolled and priced per gross. Please Specify Size: S, M, L

Item. Description. . . PriceR200LWR Finger Cots $4.42

SAF-T-TAPE®.Self-Adhering.Gauze.• Improves grip while protecting fingers• Allows greater flexibility than gloves• Sticks to itself, not to skin or hair• Permits skin to breathe for greatest

comfort

Item. Description. UOM. . Price110-075 3/4” x 30 yd 16 per tube $21.57110-100 1” x 30 yd 12 per tube $21.57


CHEM

ICAL

RES

ISTA

NT P

VC –

G

LO

VE

S

Super.Flex™

Smooth finish fully PVC-coated Best’s exclusive, low-temperature-resistant PVC formulation keeps recyclable Super Flex soft and supple even in cold conditions, while providing excellent abrasion resistance and protection from a broad range of chemicals. Its two-piece jersey liner en-hances worker comfort and glove flexibility, and its yellow color provides a high-contrast, visual warning of possible contamination due to spill, splash or splatter. Super Flex is available in a variety of styles, including a rough-finished style for applications where a good wet grip is required. Sanitized®. Made in the USA.

Sold per pair or by 72/case. Size: Large

Item. Description. . 1-11. 12+753 Knit Wrist $3.42 $2.93755 12” Gauntlet $3.90 $3.34756 -10 Elbow-Length Gauntlet $5.49 $4.91

PVC.Insulated.GloveDouble dipped PVC, resists oils, solvents, and chemicals. The Atlas 460 has a seamless 100% acrylic pile lining to keep hands warm and dry. The insulated lining flexes with the glove, reducing the hand fatigue associated with working in cold environments. The double-dipped PVC coating is waterproof and chemi-cal resistant, and is textured for positive grip, wet or dry. Sold per pair.

Item. Description. . 1-11. 12+460 PVC insulated glove $10.36 $9.25

Cannonball™.GlovesHigh-grade PVC coating provides outstanding chemical resistance, wear and flexibility, mak-ing this glove an excellent choice for abrasive chemical applications. Featuring a unique, non-slip wet grip. Suitable for handling slick, abrasive materials, provides good protection against a wide range of chemicals. Launderable. Soft, two-piece jersey liner enhances worker comfort and dexterity. Sanitized®. Made in the USA.Sold per pair or by 72/case.

Item. Description. . 1-11. 12+803 Knit Wrist, Large $3.42 $2.93L803 Knit Wrist, Small $3.42 $2.93810 10” Gauntlet, Large $3.35 $2.87L811 11” Gauntlet, Small $3.65 $3.13812 12” Gauntlet, Large $3.90 $3.34812M 12” Gauntlet, Medium $3.90 $3.34814 14” Gauntlet, Large $4.02 $3.44

Economy.Foam-Lined.PVCFluorescent orange PVC glove is fully coated and foam-lined with a knit wrist. Sold per pair.

Item. Description. . 1-11. 12+ M6700 2 1/2” Rubberized Safety Cuff $2.86 $2.59

Snorkel®.PVC-Coated, Premium Quality One of Ansells premium gloves, Snorkel features a unique PVC rough finish which provides outstanding chemical resistance, wear, and flexibility. The finish con-tains nylon particles that increase the glove’s cut/abrasion resistance and wet grip capabilities, while the PVC com-pound provides greater flexibility and comfort. Choose between an interlock knit lining for increased flexibility and launderability or a jersey lining for cushioning and moderate insulation.

Ideal for: : Petrochemicals and refining, handling equipment and abra-sive materials coated with acids, caustics, solvents, grease, and oil.

Sold per pair.

Item. Description. . 1-11. 12+Women’s.S,.Men’s.L..

4-404 Fully coated, knitwrist, jersey-lined $3.18 $2.73

Men’s.M.&.L4-412 Fully coated, 12” gauntlet, jersey-lined $3.90 $3.344-414 Fully coated, 14” gauntlet, jersey-lined $4.02 $3.444-452 Fully coated, 12” gauntlet, knit-lined $4.80 $4.114-454 Fully coated, 14” gauntlet, knit-lined $5.15 $4.414-460 Fully coated, 10” gauntlet, jersey-lined $3.60 $3.08

•

Premium.Double-Dipped.PVC.Gloves.

Maximum resistance to chemicals, oils, solvents and strong acids Double-dipped sandy finish green with knit wrist Flexible with interlock liningNon-slip grip in wet or dry applications Treated with Actifresh Ideal for: working with oils and solvents, petrochemicals and refining

Sold per dozen or 72/case. Size: Men’s Large

Item. Description. . 1-11.dz.. 12+6400 Knit Wrist $27.71 $26.566410 10” Gauntlet $30.10 $28.856412 12” Gauntlet $33.14 $31.776414 14” Gauntlet $36.07 $34.586418 18” Gauntlet $50.09 $48.01

•

•

••••

Ultimate.GlovePVC Coated - Cotton LinedPetroleum resistant, triple dipped, seamless gloves.

Textured PVC grip over 100% seamless, cotton liningErgonomic design provides dexterity and comfortable fitHeavy-duty PVC coating for puncture and liquid protectionPremium appearance and excellent durability

Sold per dozen, 72/case. Sizes: M-XL. Color: Blue.

Item. Description. . 1-5. 6+73356 Blue Ultimate Glove $38.40 $34.56

••••


GLO

VE

S – CHEM

ICAL RESISTANT PVC

Vinylove™.Liquid.Proof.600.Vinylove™

Knit wrist for a snug fit, soft, flexible PVC coating. The 600 offers comfort and flexibility as well as liquid-proof protection for hands in wet working environments. This short style glove has a specially formulated PVC coating on an ergo-nomically shaped seamless liner, with a cotton knit wrist.

620.Vinylove™

PVC double-dipped seamless knit, outperforms unsupported latex gloves. Provides workers with maximum com-fort and dexterity. Liquid- and chemical- resistant PVC coating remains flexible in cold temperatures and provides an excellent grip.

660.Vinylove™

Triple-dipped PVC, resists oils, sol-vents, and chemicals. Suited to a variety of work applications requiring added protection. The 660 has the protection, comfort, and dexter-ity required for hard-working hands.Sold per pair or by 144/case.

Item. Description. . 1-11. 12+600 Green, Knit Wrist M-XL $3.10 $2.38620 12” Orange, S-L $3.95 $3.20620X 12” Orange XL $4.25 $3.60660 12” Blue, S-L $3.36 $2.58

620

600

660

Fuzzy.Duck®

Features Best’s exclusive, breathable, PVC coating on a soft, comfortable, two-piece jersey liner. Abrasion resistant Fuzzy Duck outwears and replaces cotton, light-to-medium-weight leather, and goatskin gloves for a variety of applications. While not liquid-proof, the textured coating provides an excellent grip and minimizes absorption of water, oil and grease, although not a true anti-vibration glove, Fuzzy Duck tends to absorb and minimize shock, too. Sanitized®. Made in the USA. Sold per pair or by 72/case. Please Specify Size: S, M, L, XL

Item. Description. . 1-11. 12+962 Fully-Coated Slip-on $2.68 $2.30

PVC.Gloves.Interlock and with smooth or sandy finish Fully coated-Black PVC Ideal for: liquid and basic chemical protection for refining, mining and utilities, petrochemicals, fishing, ship building, and handling abrasive materials coated with grease and oil, caustics, acids and solvents.

Sold per dozen pair or by 12dz/case. Size: Men’s Large

Item. Description. . 1-11. 12+6212 12” Smooth Gauntlet $13.77 $13.206212R 12” Rough-sandy Gauntlet $14.81 $14.20

•••

Petroflex®.PVC-CoatedAn economical choice for applications where gloves become excessively contaminated or where glove controls are difficult to administer. The rough finish optimizes cut/abrasion resistance and provides excellent wet grip, while an interlock knit cotton lining provides flexibility and laun-derability. A jersey lining is also available for cushioning and moderate insulation.

Ideal for: refining and petrochemicals, machining, construction, forestry, mining, utilities, handling equipment and abrasive materials coated with oil, grease, acids, and solvents

Sold per pair or 72/case. Size: Large

Item. Description. .1-11. 12+Fully.coated,.jersey-lined

12-202 knitwrist, $2.00 $1.7112-210 10” gauntlet $2.22 $1.9012-212 12” gauntlet $2.40 $2.0512-214 14” gauntlet $2.70 $2.31

Fully.coated,.knit-lined12-252 10” gauntlet $2.40 $2.0512-254 12” gauntlet $2.70 $2.31

•

Economy.Double-Dipped..PVC.Gloves

Black, sandy textured finish with interlock lining Ideal for: basic liquid, mild chemical protec-tion, auto industry, construction & miningMen’s size Large fits most

Sold per pair or by 72/case.

Item. Description. . 1-11. 12+6500S Knit wrist $1.36 $1.136510S 10” Gauntlet $1.56 $1.296512S 12” Gauntlet $1.72 $1.656414S 14” Gauntlet $3.06 $2.48

•

•

•

Temp-Sea.770.Heavy Weight, smooth Blue 11” glove with thermal lining and over-edged cuff. Liner made from acrylic terry knit with brushed jersey for comfort and cold temperature protection (-22 degrees Fº). Specially formulated Blue PVC coating provides liquid proof protection in wet applications, while maintaining flexibility and dexterity in cold environments. Offers excellent resistance to oil, grease and hydrocarbon.

Ideal for: Fishing applications; Road maintenance; Cold storage facili-ties; Maintenance at ski resorts; Food industry, handling and operation of cold storage units.

Sold per pair, 48 pairs per case.

Item. Description. . . Price77039 Temp-Sea $12.87

•


CHEM

ICAL

RES

ISTA

NT L

ATEX

–

GLO

VE

S Unsupported.Lined.Latex.Gloves.

12” length, 18 mil thickness Embossed grip on palm and fingers Straight cuff Flock lined for easy on, easy off as well as perspiration absorption Component materials comply with FDA regulations for food contact Industry Applications: Food-processing industries, janitorial work, poultry, and research laboratories.

Sold per dozen pair or by 12dz/case.

Item. Yellow.Flocked. . 1-11.dz.. 12+5270P Size 7 $7.92 $6.605280P Size 8 $7.92 $6.605290P Size 9 $7.92 $6.60

Item. Blue.Flocked. . 1-11.dz.. 12+5270PB Size 7 $7.92 $6.605280PB Size 8 $7.92 $6.605290PB Size 9 $7.92 $6.60

••••

•

•

Chemical.Resistant.GlovesGeneral Duty -Unsupported Latex

18 Mil., Flock lined, yellow, recessed diamond grip Rolled bead cuff for tear resistance Provides resistance to acids, alkalis, alcohols, salts, ketonesFlock lining provides increased comfort and ease of donningChlorinated12” length Ideal for: electronics, laboratory, assembly and maintenance

Sold per Dozen or 12 dz/case. Please Specify Size: S-XL

Item. Description. 1-11.dz.. 12+48-G12Y 18 mil, flock lined $7.98 $6.88

•

••

••••

Value.Master™.Chemical-.Resistant.GlovesProviding unequalled value, comfort, and flexibility as well as outstanding tactile sensitivity, strength, dexterity and elasticity, the form-fitting 12”, 18-mil, 100% natural- rubber-latex Value Master feature a self-flushing tractor-tread pattern that provides an excellent grip, wet or dry, and encourages run off of fluids often trapped by diamond-shaped embossed patterns. Value Master resists a wide range of chemicals, including animal fats, caustics, acids, oils, salts, alcohols and detergents.

Each Value Master is air tested to ensure quality. Value Master is avail-able unlined, either amber (VMU) or blue (VMUP) or flock lined, either yellow (VM) or blue (VMP). The VMU and VMUP are chlorinated to provide extra, casehardened chemical resistance and to ease donning and doffing. The VM and VMP feature 100%-cotton flocking for added com-fort. Value Master gloves are available in four sizes for a perfect fit. Sold by the dozen or12dz/case.

Item. Description-Size. . 1-11.dz.. 12+VMUAS Unlined-amber - small (07) $8.52 $7.32VMUAM Unlined-amber - medium (08) $8.52 $7.32VMUAL Unlined-amber - large (09) $8.52 $7.32VMUAX Unlined-amber - extra large (10) $8.52 $7.32VMUPS Unlined-blue - small (07) $8.52 $7.32VMUPM Unlined- blue - medium (08) $8.52 $7.32VMUPL Unlined- blue - large (09) $8.52 $7.32VMUPX Unlined- blue - extra large (10) $8.52 $7.32

Item. Description-Size. . 1-11.dz.. 12+VMS Flock-lined-yellow - small (07) $7.08 $6.12VMM Flock-lined-yellow - medium (08) $7.08 $6.12VML Flock-lined-yellow - large (09) $7.08 $6.12VMX Flock-lined-yellow - extra large (10) $7.08 $6.12VMPS Flock-lined-blue - small (07) $7.08 $6.12VMPM Flock-lined- blue - medium (08) $7.08 $6.12VMPL Flock-lined- blue - large (09) $7.08 $6.12VMPX Flock-lined- blue - extra large (10) $7.08 $6.12

Unsupported.Latex.Gloves.12” length, 18 mil thickness Embossed grip on palm and fingers Scalloped or straight cuffs Chlorinated for easy on, easy off Component materials comply with FDA regulations for food contact Industry Applications: canning and food-processing industries, janito-rial work, maintenance, R & D.

Sold per dozen pair or by 12dz/case. Sizes: 7-7-1/2; 8-8-1/2; 9-9-1/2; 10-10-1/2

Item. Scalloped.Cuff. . 1-11.dz.. 12+5080E Size 8 - Amber $7.92 $6.605080B Size 8 - Blue $7.92 $6.605090E Size 9 - Amber $7.92 $6.605090B Size 9 - Blue $7.92 $6.60

Item. Straight.Cuff. . 1-11.dz.. 12+5180E Size 8 - Amber $8.04 $6.725180B Size 8 - Blue $8.04 $6.725190E Size 9 - Amber $8.04 $6.725199B Size 9 - Blue $8.04 $6.72

•••••

•

Canners.and.Handlers™.Unsupported, unlined, medium-duty, natural rubber latexFeaturing excellent dexterity, tensile strength, and elasticity, our 20-mil Canners and Handlers gloves are a good choice for chemical, snag, puncture, abrasion, and cut resistance. Offered in two lengths for added protection against chemi-cal hazards and two embossing designs (pattern and pebble) for excellent grip on wet or dry surfaces. These gloves are made with component materials that comply with FDA regulations for food contact.

Ideal for: poultry, food processing, small parts assembly, pharmaceutical manufacturing, janitorial/plant maintenance.

Sold per dozen or 144/case.This product contains natural rubber latex, which may cause allergic reactions in some individuals.

Item. Description-Size. . 1-11.dz.. 12+384 Natural, pattern, embossed, 20 mil, 14” 7, 8, 9, 10 $15.60 $13.32392 Natural, pebble- embossed, 20 mil, 12” 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 11 $9.36 $8.04394 Natural, pattern- embossed, 20 mil, 12” 7, 8, 9, 10 $9.36 $8.04

•


GLO

VE

S – CHEM

ICAL RESISTANT NEOPRENE

Neoprene™.GlovesMulti-dipped in premium grade Neo-prene for superior quality and durabil-ity and provides excellent protection against acids, caustics, oils, greases and many solvents. Suggested applications: degreasing, petrochemicals, refining, metal fabrication, plating, galvanizing, and general material handling.Sold per pair.

Item. Description. . 1-11. 12+Smooth.Finish

5122 Knit Wrist, Fully Coated, Large $4.63 $3.976780 12” Gauntlet, Fully Coated, Large $6.10 $5.236784 14” Gauntlet, Fully Coated, Large $7.23 $6.206797-10 Elbow-Length, Palm Coated, Large $10.20 $8.74

Rough.Finish6780R-10 12” Gauntlet, Fully Coated, Large $6.10 $5.236784R-100 14” Gauntlet, Fully Coated, Large $7.23 $6.20

Insulated.Neoprene™..&.Nitrile.GlovesFor insulation against heat or cold, Insulated Neoprene features a triple-layer construc-tion of foam insulation sandwiched between a layer of 100% cotton jersey and 100% cotton interlock. Gloves are fully coated and rough finished.Sold per pair, Large only.

Item. Description/Size. . 1-11.dz.. 12+6781R10 12” Gauntlet, Insulated $10.93 $9.376781R0610 6” Nitrile, Laminated $16.67 $14.926781R145 14” Nitrile, Laminated, Sewn Sleeve $23.88 $20.47

Defensive.Guard™.Neoprene.GlovesNeoprene-coated glove with sewn-on nitrile-laminated sleeve. This rugged glove is suitable for many pellet-blasting and sandblasting applications. Launderable, the sleeve is not liquid-proof, although the gauntlet itself is.Sold per pair.

Item. Description/Size. . 1-11. 12+6780-20 12” Gauntlet, Smooth, w/ Sewn-on sleeve $26.80 $22.03

Neoprene.Dry.Box.GlovesNeoprene, 8” dia cuff, 15 mil, 32” length, ambidextrous. Sold per pair. Please Specifiy Size: 9Q (9 3/4), 10H (10 1/2).

Item. Description. . . Price8N1532A/10H Dry Box Gloves $122.658N1532A/9Q Dry Box Gloves $122.65

Chem.Master™.Neoprene.Over.Rubber.Neoprene over natural rubber construction provides excellent abrasion, tear, and punc-ture resistance. 100% cotton flock lining. 13” long, 26-mil, flock-lined, tractor-tread grip, black over blue safety feature. Suggested applications: automotive and battery manufacturing, chemical plants, aircraft assembly, food process-ing, pesticide manufacturing, plant maintenance and printing clean up. 21CFR, 170-199 compliant.Sold per dozen or by 144/case. Please Specify Size: S, M, L, XL

Item. Description. . 1-11.dz.. 12+CHM 13” Chem Master, 26 mil $17.52 $15.12

Chemi-Pro®.Unsupported, Heavy-Duty, Cotton Flock-Lined, Neoprene Over Natural Rubber LatexA unique dipping process which combines neoprene over natural rubber latex provides increased protection against a wide range of chemicals. The gloves are 27 mil thick for extra ruggedness and durability, and the 13” length is lon-ger than most standard gloves for added forearm protection. A recessed diamond-embossed pattern provides added grip on wet or dry surfaces, while a cotton flock lining absorbs perspiration and increases worker comfort. Chemi-Pro gloves are an economical, cost-saving substitute for higher-priced, heavy gauge nitrile and neoprene gloves.

Ideal for: aircraft assembly, automotive manufacturing, chemical plants, pesticide manufacturing and plant maintenance

Caution: This product contains natural rubber latex, which may cause allergic reactions in some individuals.Sold per dozen. Please Specify Size: 7 (XS), 8 (S), 8.5 (M), 9 (L), 10 (XL)

Item. Description. . 1-11.dz.. 12+224 Blue/yellow, diamond- embossed, flock-lined, 27 mil, 13” $17.40 $14.88

•

ChemTech.Unsupported..Neoprene-on-Latex.Gloves.

Component materials comply with FDA regulations for food contact 28 and 30 mil thick Flocked-lined, ocean blue with yellow cuffEmbossed grip on palm and fingers Industry Applications: aircraft assembly, automotive and battery manufacturing and printing industry.Lined-Black

Sold per dozen pair or by 12dz/case. Please state size when ordering.

Item. 28.mil.–.Blue/Yellow. . 1-11.dz.. 12+5406S Size 6 $22.49 $21.565407S Size 7 $22.49 $21.565408S Size 8 $22.49 $21.565409S Size 9 $22.49 $21.565400S Size 10 $22.49 $21.565401S Size 11 $23.47 $22.50

Item. 30.mil.–.Black. . 1-11.dz.. 12+5435 Sizes: S, M, L, XL $28.08 $26.88

•

••••

•


Silver.Shield®/.4H®.Sleeves

An excellent choice for chemical and petrochemical laboratories, spill cleanups, hazmat control operations, photo finish-ing, medical laboratories and other applications.

Resistant to over 280 different chemicals, including alcohols, aliphatics, aromatics, chlorines, ketones and estersSleeves can be worn with gloves and/or apron to provide additional protection for the arms and shoulders

Length 20”, 2.7 mil. Sizes: one size fits all. Made in USA.Sold per pair.

Item. Description. . . PriceSSS 20” Silver Shield Sleeves-pair $13.50

•

•

CHEM

ICAL

RES

ISTA

NT B

UTYL

, VIT

ON, N

ITRI

LE –

G

LO

VE

S

Fluonit.468Smooth black, unlined glove with pinked cuff. Combines Nitrile layer and several outer layers of Fluoroelastomer to provide excellent chemical protection against acids, alkali compounds, alcohols, high aromatic solvents, aliphatics or chlorines.The green nitrile interior provides the glove with superior mechanical re-sistance. As the black outer Fluoroelastomer layer wears through abrasion the green inner layer will appear, indicating gloves should be replaced.

Ideal for: Metal degreasing, Petroleum refineries, Site decontamination, Cleaning Applications using hazardous solvents, Manufacturing of paints, coatings, and varnish.

Sold per pair.

Item. Description. . . Price46831 12”, 20 mil, Fluonit $ 57.52

•

TopChem.345Heavy Weight Gray 14.5”, smooth PVA glove, knit lined with a pinked cuff. Provides chemical protection of the top 12 hazardous chemicals, 3 gases and can withstand full immersion, in pure water for 2 hours without degrading. Unique water resistant outer layer allows gloves to be used in water-based solvents.Multi-Layer construction offers inner layer of neoprene with several outer layers of PVA with comfortable knit liner to absorb perspiration.

Ideal for : Metal Treatment using solvents, Cleaning of printing presses, Mixing of inks and paints, Manufacturing of resins and composite materials, and Hazardous material handling.

Sizes: 7-10, Sold per pair.

Item. Description. . . Price34531 Topchem $54.63

•

Viton®/Viton®.IIUnsupported Viton glove. Heavy-duty yet flexible, Viton gloves were developed for the highest chemical-resistance barrier to aromatic hydrocarbons such as benzene, toluene or xylene. Viton II gloves also offer an excellent barrier to most chlorinated solvents and aliphatic hydrocarbons. Smooth finish with rolled cuff.890 14”, 30 mil Unlined, Please Specifiy Size: 9 (L), 10 (XL)892 12”, 12 mil Please Specifiy Size: S, M, L, XL, XXLSold per pair.

Item. Description. . . Price890 14”, 30 mil, Viton, Unlined $139.00892 12” 12 mil, Viton II $68.50

Butyl.GloveButyl gloves exhibit the highest permeation resistance to gas or water vapors. Ideal for use in ketones and esters. 13 mil, 11” length.Sold per pair. Please specifiy size: 7, 8, 9, 10, 11

Item. Description. . . PriceB131 11” 13 mil. Butyl Glove $20.31

Silver.Shield®.Glove2.7 mil., lightweight, flexible laminate mate-rial. Resistant to over 280 different chemicals, including alcohols, aliphatics, aromatics, chlorines, ketones and esters. Does not contain chemical accelerators that can cause allergic reactions.Sold per pair.

Item. Description/Size. . . PriceSSG Silver Shield Glove, 7, 8, 9, 10, 11 $4.75

ChemTek™.Performs under the toughest conditions Offerin the broadest line of highly resistant chemical protective gloves in the industry. For an extra measure of security, each pair is packed with an individual insert so critical information is always at your fingertips. ChemTek butyl gloves deliver the ketone resistance of natural rubber plus better hydrocarbon resistance. They also provide the ester resistance of nitrile with improved aldehyde resistance. If you need superior resistance for ester, ketones and oxidizing agents including concentrated oxidizing mineral acids such as 70% nitric and 98% sulfuric, you’ll find a ChemTek butyl glove that fits your application. The Viton layer over the butyl means a lower-cost glove for aggressive chemical exposure.

Ideal for: maintenance, sampling, production, hazmat, first response, unknown exposure

Sold per pair.

Item. Description.&.Size. . 1-11. 12+Butyl

38-214 14 mil, smooth finish, 12” length 7, 8, 9, 10, 11 $17.20 $14.7438-314 14 mil, rough finish, 12” length 7, 8, 9, 10, 11 $18.05 $15.4738-320 20 mil, rough finish, 12” length 9, 10 $23.02 $19.7338-414 14 mil, smooth finish, 14” length 7, 8, 9, 10, 11 $22.75 $19.5038-420 20 mil, smooth finish, 14” length 9, 10 $25.83 $22.1438-428 28 mil, smooth finish, 14” length 9, 10 $32.08 $27.5038-514 14 mil, rough finish, 14” length 7, 8, 9, 10, 11 $20.05 $17.1838-520 20 mil, rough finish, 14” length 9, 10 $26.50 $22.71

Viton/butyl38-612 12 mil, smooth finish, 12”length 8, 9, 10 $58.40 $50.0538-620 20 mil, smooth finish, 12” length 9, 10 $81.73 $70.05

•


GLO

VE

S – CHEM

ICAL RESISTANT NITRILE

PowerCoat.Nitrile-Coated.Gloves.Provides excellent chemical and compound resistance while allowing the ultimate flexibility and dexterity. Superior protection against punctures, cuts, and abrasion make these the optimum choice for the toughest industrial jobs, including chemical handling, auto assembly, petro-chemi-cal refining, degreasing and food processing. Supported, 26” medium weight., nitrile, yellow, elastic cuff, with rough grip. Sold per pair. Please Specify Size:M, L, XL

Item. Description. . 1-11. 12+722 26” PowerCoat Nitrile Gloves $10.82 $9.75

Chemical-Resistant.Unsupported.NitrileUnlined, Green, Pebble-Grip Gloves Light weight construction and hand specific design provides real comfort and protection. Pro-vides flexibility, tactile sensitivity and dexterity.

Excellent resistance to animal fatsComply with FDA RegulationUsed in light chemical applications, printing and meat and poultry processing

Sold per dozen or 12 dz/case. Please Specify Size: 8, 9. 10, 11

Item. Description. 1-11.dz.. 12+310R 13” 11 mil. Unlined pebble grip $15.68 $13.52

•••

Unsupported.Nitrile.Gloves.Ideal for food processing (red meat, poultry, dairy), chemical processing (petrochemicals, oil refining), machine operations, graphic arts, battery manufacturing and maintenance 13 length, heavy-duty non-slip grip. Straight cuffs. Component materials comply with FDA regulations for food contact.Sold per dozen pair or by 12dz/case.

Item. Straight.Cuff. 1-11.dz.. 12+5307 Size 7 $15.72 $15.125308 Size 8 $15.72 $15.125309 Size 9 $15.72 $15.125310 Size 10 $15.72 $15.125311 Size 11 $15.72 $15.12

Blue.Grit®.Gloves.First dip smooth rubber coating, second dip in dry granular rubber for extra grip 100% cotton lining for extra comfort and absorption Cut- and puncture-resistant Made with FDA-accepted materials for use in food processing Construction, fishing, glass handling, masonry, painting, sheet metal indus-try and wood working.

Sold per pair or by 72/case. Please Specify Size: S or L

Item. Description. . 1-11. 12+6850 Blue Grit 10” Length $3.24 $3.116852 Blue Grit 12” Length $3.41 $3.27

•

•

••

•

Sol-Vex®

Unsupported, Premium-Quality, Embossed Nitrile. Sol-Vex gloves are made of a high-performance nitrile compound which provides an outstanding com-bination of strength and chemical resistance. When exposed to aromatic and petroleum solvents, as well as caustics and animal fats, Sol-Vex gloves have proven to be a superior choice over rubber or neoprene. Sol-Vex gloves won’t swell, weaken, or degrade, and offers better protection against snags, punctures, abrasions, and cuts. Sol-Vex gloves do not promote contact dermatitis, and their component materials comply with FDA regulations for food contact.

Ideal for: chemical processing, oil refining, petrochemicals; food processing (red meat, poultry, vegetables, fruit, dairy, and canning); machining operations using cutting oil and coolants, metal fabrication; Graphic arts, printing cleanup

Sold by the pair or 144 per case.

Item. Description/Size. . 1-11. 12+37-145 13” 11 mil., 6, 7, 8, 9, 10, 11 $1.58 $1.3637-155 13” 15 mil., 7, 8, 9, 10, 11 $1.85 $1.5937-175 13” 15 mil., Flock-Lined, 6, 7, 8, 9, 10, 11 $1.82 $1.5637-165 15” 22 mil, 7-7.5, 8-8.5, 9-9.5, 10, 11 $6.30 $5.4037-185 18” 22 mil, 7-7.5, 8-8.5, 9-9.5, 10, 11 $8.83 $7.57

•

AquaKnight®.Gloves.AquaKnight hand protection styles combine liquid and chemical protec-tion with enhanced tactile sensitivity. The nitrile and neoprene styles provide waterproof protection and the latex series is splash resistant. This assortment of seamless knit liners with different polymers affords the greatest dexterity plus chemical hand protection.

Ideal for: Chemical processing, handling rough castings and steel bars, metal treatment, paint and varnish manufacturing, petrochemical and oil refining.

Sold per the pair.

6942.Waterproof.Neoprene65% Cotton / 35% PolyesterSeamless LinerSizes: L, XL

9685.Waterproof13 Gauge Cotton ShellDouble Dipped NitrileSizes: S, M, L

9697.Splash.Resistant.13.Gauge.Nylon.ShellFully Coated With Stretch LatexKnit WristSizes: S, M, L, XL

Item. Description. . . Price6942 Waterproof Neoprene $7.489685 Double Dipped Nitrile $5.809697 Fully Coated Latex $4.25

•

6942

9697

9685


POLY

/ CO

TTON

–

GLO

VE

S

Parade.GlovesThese 100% white cotton gloves are excel-lent for handling electronics components. Snug fitting for good dexterity. Made with three lines of raised stitching on the back. Slip-on style.Sold per dozen. Please Specify Size: S, M, L

Item. Description. . 1-11.dz.. 12+100WMNZ Parade Gloves $10.36 $8.93

Inspector.GlovesExtremely lightweight 100% cotton inspector’s glove. Comfortable and crisp looking. Reversible pattern allows longer wear. Unhemmed. Sold per dozen. Size: Men’s only.

Item. Description. . 1-11.dz.. 12+8600CM Inspector Gloves $3.95 $3.80

Winter.LinerHeavy string knit, nylon and polypro-pylene blend, ambidextrous pattern for double wear. Large size fits most men, Small size fits most women. Retains wicking action of pure polypropylene, yet lasts longer.Sold per dozen. Please Specify Size: S, M, L, XL

Item. Description. . 1-11.dz.. 12+3272 Winter Liner, White $11.52 $9.84

Wool.Knit.LinerStandard-weight wool/acrylic blend liner. Wool provides warmth, and acrylic ensures comfort. 4” thermal cuff keeps out cold.Sold per pair or 144/case. Sizes: Men’s

Item. Description. . 1-11. 12+WK18ATC Wool Knit Liner $1.95 $1.85

String.Knit.GlovesCotton/polyester blend provides comfort and warmth. Allows manual dexterity. Use as a glove or glove liners.Sold by the Dozen or 25 dz/case. Please Specify Size: S, M, L, XL

Item. Description/Size. . 1-11.dz.. 12+9500 Cotton/Poly, Regular Weight $5.16 $5.049636LM Economy Weight $3.00 $2.889638LM Light Weight $2.82 $2.70

WickDry®.Thermo-O-LinerUltra light weightWickDry® moves the moisture away and keeps hands dry under the most strenu-ous conditions. Plus the added benefit of Thermolite® gives thermal insulation and additional wicking away of moisture, blended with Lycra® for a smooth form fit. Sold per pair. Please Specify Size: S, M, L

Item. Description. . 1-11. 12+9995 Glove liner $10.50 $9.35

String.Knits.Reversible pattern Provides comfort and warmth Use as gloves or glove liners Color-coded hem to identify sizes Refrigerated areas, food processing, general main-tenance, parts handling, shipping / receiving and automotive plants.

Sold per dozen. Please Specify Size: XS, S, M, L

Item. Description. . 1-11.dz.. 12+9616 100% Acrylic-White $7.72 $7.40

•••••

Thermastat™.Gloves.Dupont’s hollow-core hydrophobic polyester Greater thermal insulation Fastest evaporation rate of moisture Extra softness for non-chafing comfort Made with FDA-accepted materials for use in food processing applications Machine wash and dry Reversible pattern Utilities, poultry, beef and pork processing, refrigerated warehousing, commercial fishing and commercial landscaping. Sold per pair or 300/case. One size fits all.

Item. Description. . 1-11. 12+9620 100% Acrylic - White $2.89 $2.779622 100% Acrylic - Blue $3.24 $3.11

•••••

•••

ThermaKnit™.Insulator®.Lightweight Thermastat FibersThe Insulator is made of Dupont®-certified Thermastat fast-wicking fibers. These unique fibers act as a hand warmer for use in cold and damp working environ-ments. Used as a liner under gloves, the Insulator is perfect anywhere hands are subjected to cold, damp conditions.

Ideal for: utilities, handling chilled or refrigerated products, fishing industry, construction, general maintenance

Sold per pair.

Item. Description. . 1-11. 12+78-101 Blue Insulator- One Size Fits All $3.09 $2.6478-150 White Insulator- One Size Fits All $2.80 $2.40

•

Cotton.Liners.100% cotton multi purpose liners.Sold per dozen, 120/case. Size: L. Color: Natural.

Item. Description. . 1-5.dz.. 6+72223 Large Cotton Liners - 12 doz $5.52 $4.97


GLO

VE

S – COTTON

8110

Canvas.GlovesThe most economical, general-use canvas glove available! These 8- and 12-ounce gloves are a standard in any industry. Good quality and value. Sold by the Dozen. Men’s sizes.

Item. Description. 1-11.dz.. 12+8110 8 oz $5.76 $4.808300C 12 oz $11.28 $10.202410G 12 oz, Knit Wrist $33.72 $28.56

Red.Head.Cotton.GloveDouble palm canvasFourchette styles provide the best fit of any heavy fabric gloveMulti-purpose gloves used for light protection in ware-housing, farming and logging applications

Sold per pair or 120/case. Please Specify Size: S, M, L, XL

Item. Description. . 1-11. 12+920 No Band $1.53 $1.32920E Elastic Band $1.58 $1.36

••

•

Quality.Cotton.Gloves!.Red.Knit.WristAvailable in a sturdy 12 oz cotton with a red knit wrist. Great for warm working environ-ments where perspiration could interfere with glove quality and effectiveness.Sold per pair or 144/case.

Item. Description. 1-11. 12+125 12 oz. (red) $1.74 $1.70

Lucky.LoggerA true 26-ounce cotton glove! Shop and compare, most logger’s gloves are made with two 11-ounce layers, but the Lucky Logger was designed with a full 18-ounce outer layer on the palm and grip, (extra thickness where you need it most) and an 8-ounce inner layer. Built to give you almost twice the wear at a very rea-sonable price. Extra features include a generous full cut and knuckle strap for added protection. Lucky Lites have the same great design as Lucky Logger, but with a 10-ounce outer layer on palm and grip. Sold per pair or 72/case.

Item. Description. . 1-11. 12+4814 Lucky Logger $2.59 $2.534810 Lucky Lites $2.48 $2.42

WHITE.OXNear-leather hand safety for the price of canvas! The glove every logger and woodsman has known for over 60 years. 100% cotton; fourchette pattern (the most comfortable of glove patterns, usually only found in dress styles); double ply quilted palm equates to construction from canvas of 22-ounce thickness; 10-ounce canvas smooth back; knitwrist. Fuzzy nap both inside and outside. Reconfigured index finger seam gives same protection as wrap around construction. Snug fit has the effect of reducing size by approximately 1/2 size. Gauntlet version has 5” rubberized canvas sleeve. Fast red dye for printing does not bleed.Sold per pair or 120/case.

Item. Description. 1-11. 12+1014 Original $4.14 $3.501014M Snug Fit $4.14 $3.501015 Gauntlet $5.52 $4.671016 Original with elastic $4.41 $3.74

Heavyweight..Hot.Mill.with.Burlap..Lining.(4564ML)

Straight thumbNap-out cotton canvasKnuckle strapBurlap liner for extra heat insulationClute pattern

Sold per pair or 144/case.

Item. Description. . 1-11.. 12+9132G Heavy Weight Gloves $1.70 $1.44

•••••

Felt-Lined.Jersey.GloveBrown jersey driver’s style glove with red felt lining. Slip-on cuff. Gunn pattern with straight thumb. Very comfortable.Sold by the Dozen or 25dz/case. Size: One size fits most

Item. Description. 1-11.dz.. 12+7900 Felt Jersey $11.52 $11.04

Brown.JerseyYou won’t find a warmer or more comfortable jersey glove for such an economical price! Men’s and Ladies’ sizes. Avail-able with or without dots, for extra gripping power and convenience. Sold by the Dozen or 25dz/case.

Item. Description. . 1-11.dz.. 12+7100 Men’s Brown Jersey $5.85 $5.607102 Ladies Brown Jersey $5.85 $5.607800 Men’s Brown Jersey with dots $8.34 $8.007802 Ladies Brown Jersey with dots $8.34 $8.00

7800 7100

1014

1015

1016


COTT

ON •

COAT

ED C

OTTO

N –

G

LO

VE

S

Performers.Extra™...Unique coating processes provide sure grip-ping ability and excellent abrasion resistance for gloves that are comfortably pliable and reduce hand, arm and back fatigue. Double-side brown dot coating over cotton. Ambidextrous for added wearability.Sold by the Dozen or 144/case. Please Specify Size: Men’s, Ladies’, Jumbo, Youth

Item. Description. . 1-11..dz.. 12+CD5AR Standard Weight $11.40 $10.20

Honey.Grip®.Multi-purpose, reversible pattern glove fea-tures a heavy weight, seamless construction Coated with uncured PVC in a honeycomb pattern for tackiness Material handling, roofing, bottling, farm and gardening industries.

Sold by the Dozen. Please Specify Size: S. M, L, XL

Item. Description. . 1-11.dz.. 12+9675 Honey Grip $14.04 $13.44

•

•

•

Two-Sided.Dot.GlovesCoated with PVC dots on two sidesColor-coded hem to identify sizes Ideal for: automotive plants, material han-dling, bottling industries, package handling, farm and gardening

Sold by the Dozen or 25 dz/case. Please Specify Size: S. M, L, XL. Gray in Small or Large only.

Item. Description. . 1-11.dz.. 12+9660 2 sided, Natural $10.08 $8.409662SM/LM 2 sided, Gray, S or L only $6.60 $5.529670LM/SM Gray cotton-poly $7.56 $6.36

Single-Side.Dot.Gloves,.Coated with dots on one sideSold by the Dozen or 20 dz/case. Please Specify Size: S, M, L, XL

Item. Description. . 1-11.dz.. 12+9650 Regular Weight - White $8.16 $6.80

•••

Black.Dot.GlovesPlastic dot coatings on the palms of these 10 ounce gloves provide great gripping power for using hand tools and for similar applications. Sold by the Dozen or 25 dz/case.

Item. Description. . 1-11.dz.. 12+8800 Black Dot Gloves $8.76 $7.32

Brown.Dot.GlovesVery popular in shake mills, this cotton/synthetic knit glove with brown dots on both sides is comfortable and durable.Sold by the Dozen or 25 dz/case.

Item. Description/Size. . 1-11.dz.. 12+9660LD Brown Dot, Large $6.24 $5.289660SD Brown Dot, Small $6.24 $5.28

Liberty.Golden.Gripper50/50 polyester/acrylic knit glove with PVC overlay on both sides. Coated thumb crotch and fingertips. Reversible pattern; fits either hand.Sold by the Dozen.

Item. Description. . 1-11.dz.. 12+PNV104 Golden Gripper PVC Criss Cross $11.28 $9.24

Gold.Chore.GlovesGreat comfort at an affordable price! These 16-ounce double palm gloves with nap ex-posed are durable and they feel great to wear.Sold by the Dozen or 144/case.

Item. Description. 1-11.dz.. 12+.8516 Gold Chore Gloves $14.52 $12.24

Gray.Soft.Duralon®..with.Badger.Paw®.Grip.Special soft Duralon yarn stretches across the hand for an exact fit without compro-mising hand comfort. Microdots protect 13 gauge knit fabric from abrasive objects, yet are small enough that they do not interfere with hand sensitivity to touch or feel. Breathable Duralon knit keeps hands cool in summer and warm in winter. Applications in-clude light assembly where dexterity and manual sensitivity are desirable. Excellent for shipping and receiving departments that handle cartons and must enter data on keypads. Sold by the Dozen or 72/case. Please Specify Size: S, M, L, XL

Item. Description. . 1-11.dz.. 12+ 8605 Single-side dotted $20.76 $19.08

Badger.Paw®.Grip.with.DotsDesigned for use in high abrasion areas where the flexibility and breath ability of machine knit gloves. Seamless inner layer of cotton provides hand comfort and wicks perspiration away. Fingertips are reinforced. Excellent replacement for leather palm gloves being used in general industrial applications. Applications include general maintenance, handling cartons, metal parts, or small castings. Sold by the Dozen or 72/case. Please Specify Size: S, M, L, XL

Item. Description. . 1-11.dz.. 12+9205 Heavy Weight $28.56 $26.40

Honey.Grip.GloveCriss cross pattern - Seamless KnitDesigned for excellent dexterity and gripping power. Coated with PVC in honeycomb pattern and can be used for Material handling, roofing, bottling, and more.

Sold per dozen, 120/case. Sizes M-XL. Color:Golden yellow.

Item. Description. . 1-5.dz.. 6+63330 Honey Comb Gripper $17.86 $16.07

•••


GLO

VE

S – COATED COTTON

554.ULTRANE.gloves.Offer extreme comfort and sensitivity with lint-free polyamide knit liner and smooth grip, Nitrile foam coated fingertips and palm. The cellular structure of the Nitrile foam extracts perspiration for optimum comfort. Nitrile foam coated palmside and fingertips offer excellent anti-slip grip, abrasion resistance and smudge-free parts handling. Polyamide liner is 280-denier stretch knit for ultimate elasticity, breathable comfort and good durability.Hand specific design in 5 sizes for optimum fit. Launderable. Medium Weight and Color: Gray knit wrist w/green.

Applications: Assembling Mechanical Components, Small Gearing, Nuts, Bolts, Fastenings, Precision Assembly

Sizes: 6-10. Sold per pair, 100 pairs per case.

Item. Description. . . Price55441 554 Ultrane $2.43

•

ULTRANE.548Black Nylon knitted gloves with palm and fingers coated with black polyurethane foam. Curved fingers and contoured palm.Guaranteed silicone-free. Elastic knitted wrist (natural rubber elastic wrist band). Textured external surface. Excellent abrasion resistance, comfortable seamless knit liner.

Applications: Intricate assembly work, sorting small components, handling microprocessors, electronics.

Sizes S-XXL. Different color cuff for each size. Sold per pair, 98 pairs per case.


•

562.ULTRANE.Grip.glovesFeature an expanded contact area for excep-tional abrasion resistance and improved grip particularly in wet applications. Medium thick-ness, good general purpose glove. Knit wrist, with raised dots for dependable grip.Reinforced raised dot Nitrile foam finish on palmside and fingers (including knuckles) offer excellent anti-slip grip, abrasion resistance parts handling.Polyamide liner is 280-denier stretch knit for ultimate elasticity, breath-able comfort and good durability. Hand specific design in 5 sizes for optimum fit. Launderable. Color: Gray w/Black.

Applications: Precision Mechanics with dry or slightly wet (oily) ap-plications, Sorting Mechanical Parts.

Sold per pair, 100 pairs per case.


•

Maxx-Grip.GloveRubber Coated - Seamless KnitGood general purpose glove with triple dipped palms.

Textured rubber grip over seamless poly/cotton knitBreathable stretch knit wrist and back for comfortContour fit for excellent dexterity and gripping powerRubber palm for puncture, wear and liquid protectionMachine Washable

Sold per dozen, 72/case. Sizes: S-XL.

Item. Description. . 1-5. 6+73349 Black Maxx Grip $22.08 $19.8773347 Blue Maxx Grip $22.08 $19.87

•

•

•

••

Nitri-Dex.GloveNitrile Coated - Seamless KnitContour fit for excellent dexterity and gripping power.

Textured nitrile palm over seam-less nylon knitBreathable stretch knit wrist and back for comfortContour fit for excellent dexterity and gripping powerNitrile palm for puncture, wear and liquid protectionMachine Washable

Sold per dozen, 120/case. Sizes S-L. Color-Sage Green & Gray or Black & Gray

Item. Description. . 1-5. 6+73376 Black & Gray $22.80 $20.5273361 Sage Green & Gray $22.80 $20.52

•

•

•

••

Thermo.Mega-Grip.GloveRubber-Coated - Insulated - Seamless KnitWarm cotton knit glove with triple dipped palms.

Textured rubber grip over seamless warm cotton knitBreathable stretch knit wrist and back for comfortContour fit for excellent dexterity and gripping powerRubber palm for puncture, wear and liquid protec-tionIdeal for cold weather or padded glove applicationsMachine Washable

Sold per dozen, 120/case. Sizes: S-XL.

Item. Description. . 1-5. 6+73373 Black & Gray $34.80 $31.32

••••

••


COAT

ED C

OTTO

N –

G

LO

VE

S These gloves fit comfortably on relaxed hands. Flexible coatings allow freedom of movement and reduce hand fatigue. The knit liners are seam-less - no lumps or seams to rub and irritate hands. The materials and production techniques give an outstanding grip, comfort, and flexibility. Atlas Gloves offer superior hand protection for every job. All Atlas gloves are machine washable.300.Original.Latex.PalmThe original has all the proven design and quality features - ergonomic fit, outstanding grip, wet or dry. Available in a wide variety of sizes to ensure a comfortable fit for everyone.300-I.ThermaFit™

Thick napped liner for comfort & warmth! The ThermaFit is a truly durable, comfortable work glove. The thick poly cotton/acrylic liner uses a rev-olutionary napping process to cushion and keep hands warm while allowing maximum flexibility and comfort. Specially textured palm provides a great grip, and the ergonomic design reduces hand fatigue. 350.NitrileFit™

Increased puncture and abrasion resistance. The same ergonomic design and superior fit found in this Atlas 300 with the added protec-tion of nitrile palm coating. Specially formulated nitrile coating provides increased puncture and abrasion resistance with excellent grip. Grease and oil resistant palm and fingertips.370.Nitrile.Tough™

Tough and durable lightweight gloves. The flex-ible nitrile coating is tougher than rubber, protecting palms and fingertips from the rigors of every day work. Seamless lightweight black nylon knit liner increases comfort while it repels dirt and stains. Ideal for jobs requiring maximum dexterity and freedom of hand movement without the fatigue associated with heavier, bulkier gloves.Sold per pair or 144/case. Please Specify Size: S, M, L, XL

Item. Description/Color. 1-11. 12-71. 72+300 Original Latex Palm, Blue $3.50 $3.30 $2.85300I Thermal Latex Palm, Gray $3.80 $3.50 $3.00350 Nitrile Palm, Green $3.79 $3.38 $3.01370 Nitrile Palm, Gray $3.90 $3.49 $3.12

Skinny.Dip®

Seamfree cotton/poly shell with wrinkle finish flat dipped natural-rubber coating. Truly outstanding dexterity, and greater comfort with the added benefit of an ergo-nomic design. This general-purpose glove can be used in most applications. Wrinkle finish, flat dipped natural rubber, knitwrist, cotton/poly shell.Sold per pair. Please Specify Size: S, M, L S, M, L, XL

Item. Description. 1-11. 12-71. 72+3811 Skinny Dip $2.06 $1.96 $1.65

Rubber.Dipped.Knit.GloveBlack poly/cotton knit shell is comfort-able and breathable for extended wear. Dipped, natural-rubber coating aids in abrasion and puncture resistance. Outstanding grip in both wet and dry applica-tions. Sewn-on Harley-Davidson® Bar and Shield logo patch.Sold per pair. Please Specify Size: S, ML and XL©2006 H-D, All rights reserved. Manufactured by Bacou-Dalloz under license from Harley-Davidson Motor Company. Not intended for use when riding a motor-cycle. Improper use may result in serious personal injury or death.

Item. Description. . 1-11. 12+HDG200 Black poly $3.60 $2.52

Economy.Flex-Tuff®.II.Latex.Dipped.String.Gloves

Latex dipped strings & cotton/polyester shell Textured latex palm dip

Sold per pair or 144/case. Please Specify Size: S, M, L, XL

Item. Description. . 1-11. 12+9688 Gray Textured Latex palm dip $1.65 $1.58

••

Flex-Tuff®.Latex.Dipped.String.Gloves

Maximum flexibility for comfort and fit Natural rubber provides abrasion resistance Textured palm dip for extra grip and durability Material handling, glass handling operations, fishing and plywood industries, sanitation, general maintenance.

Sold per pair or 144/case. Please Specify Size: S, M, L S, M, L, XL

Item. Description. . 1-11. 12+9680 Blue Latex palm & fingers $3.04 $2.92

•••

•

Economy.Latex.PalmCotton/Polyester shell Choose from 10 or 13 gauge weightsPalm and fingers dipped for greater durability

Sold per pair or 240/case

Item. Description. . 1-11. 12+9681 Green 10 Gauge $0.80 $0.779682 Blue 13 Gauge $0.98 $0.94

•••


GLO

VE

S – COATED COTTON

G40.Purple.Nitrile®.Foam.Coated.Gloves.Innovative Purple Nitrile gloves deliver 25% better productivity versus leather for general-purpose use. Exclusive nitrile foam coating provides the highest abrasion resistance rating.Perfect for small parts assembly, auto assembly, materials handling, warehouse activities and general maintenance.

Seamless knit nylon liner improves dexterity Abrasion resistance rating of 4 (EN Standards) Excellent dexterity Black & purple color hides oil and dirt

Sold per pair.

Item. Purple.Nitrile. . 1-11. 12+40225 Size 7 (S) $3.45 $3.1740226 Size 8 (M) $3.45 $3.1740227 Size 9 (L) $3.45 $3.1740228 Size 10 (XL) $3.45 $3.1740229 Size 11 (XXL) $3.45 $3.17

••••

G40.Latex.Coated®.GlovesDesigned for excellent durability in the work environment, these general-purpose poly-cotton latex-coated gloves are pro-cessed to yield lower latex proteins. An ex-cellent value, they offer good grip and great comfort and dexterity. They excel at use in masonry, general maintenance, materials handling, warehousing and shipping. Sold per pair.

Item. Gray-Black.Latex. . 1-11. 12+97270 Size 7 (S) $2.33 $2.1497271 Size 8 (M) $2.33 $2.1497272 Size 9 (L) $2.33 $2.1497273 Size 10 (XL) $2.33 $2.1497274 Size 11 (XXL) $2.33 $2.14

HyFlex®.Lite.Knit-Lined, Dipped, Color-Coded Cuff Where dexterity is the key factor, HyFlex Lite is the perfect choice. Ideal for the electronics industry, and computer assembly. Sold per pair or by 72/case. Available in sizes: 6, 7, 8, 9., 10

Item. Description. . 1-11. 12+11-600 HyFlex® Lite Gloves $2.63 $2.26

HyFlex®.Foam.glovesThe outstanding oil grip you need with the increased comfort you want.

The dark foam nitrile coating effectively hides soil, lengthening the time between glove replacements. Perfect for any job requiring workers to handle small, oily parts.

Sold per pair or by 72/case. Available in sizes: 6, 7, 8, 9, 10, and 11.

Item. Description. . 1-11. 12+11-800 HyFlex Gray Foam Nitrile Gloves $4.28 $3.67 11-801 HyFlex Black Foam Nitrile Gloves $4.28 $3.67

•

Hynit®.The Quality Choice in Light- to Medium-Duty GlovesA comfortable, longwearing replacement for cotton or leather gloves. Made from a longwearing nitrile-impreg-nated fabric, which provides excellent snag, puncture, abrasion, and cut resistance. Hynit gloves outwear 8-ounce cotton by as much as 10 to 1, goatskin by 3 to 1, and light leather by 4 to 1. The gloves feature superior dry grip, no silicone, and are light and comfortable to wear. Fully launder-able, with color-coded cuffs to simplify sorting and storage.•General plant use • Assembly and inspection • Receiving • Light-to-me-dium fabrication • Materials handling.Sold per pair or 144/case. Please Specify Size: 6.5 (Women’s S), 7 (Women’s M), 7.5 (Women’s L), 8 (Men’s M), 9 (Men’s L), 10 (Men’s XL)

Item. Description. . 1-11. 12+32-105 Slip-on $2.47 $2.1132-125 Perforated Back Panel - Slip-on $2.59 $2.2132-135 Nylon Mesh Back - Slip-on $2.75 $2.35

PowerFlex®.Cut-, Abrasion-, and Puncture-Resistant; Poly/Cotton Knit LinerPowerFlex gloves provide a combination of cut, abrasion, and puncture resistance; superior wet and dry grip; and unbelievable comfort. The gloves are ergonomically designed with a soft gray; seamless poly/cotton knit liner that’s palm-dipped with a textured, natural rubber coating. The uncoated back allows air to circulate, which keeps hands cooler and drier, and the fully coated thumb provides added protection in this high-risk area.

Ideal for: general maintenance, shipping & receiving, assembly, con-crete & brick handling and lumber handling

Sold per pair. Please Specify Size: 7 (XS), 8 (S), 8.5 (M), 9 (L), 10 (XL) Caution: This product contains natural rubber latex, which may cause allergic reactions in some individuals.

Item. Description. . 1-11. 12+80-100 Seamless poly/cotton knit lining; dipped in textured natural rubber $2.77 $2.37

•

UltraTech™.Work.Gloves.Good to excellent tactile sensitivity Excellent comfort and fit Cut and abrasion resistance 100% nylon shell Polyurethane palm and fingers dip Ideal for: assembly, low lint protection, manufacturing, small parts handling, general purpose

Sold per pair or 144/case. Please Specify Size: S, M, L XS, S, M, L, XL

Item. Description. . 1-11. 12+9696 Gray Polyurethane $2.87 $2.75

••••••


COAT

ED C

OTTO

N –

G

LO

VE

S

Nitri-Pro™.Gloves.Supported NitrileNitri-Pro is an economical replacement for heavy-duty leather palm work gloves, and is available rough finished for a good wet grip and extra wear or smooth finished for a good dry grip and more flexibility. Features triple-layer foam insulation. Suggested applications: handling rough castings, cores, extrusions, tubular steel, sheet metal, fabricated metal, lumber, plywood, drywall, concrete blocks, bricks, and general building materials. 21CFR, 170-199 compliant. Sold per pair or by 72/case. Please Specify Size: S, M, L. Item 7066R available in M, L only.

Item. Description. . 1-11. 12+7066 Smooth Palm, Safety Cuff $4.25 $3.497066R Rough Palm $4.25 $3.49

Nitty.Gritty™.GlovesThe most cut resistant, comfortable, pre-mium value glove of its class. Multi-dipped, premium natural-rubber coating gives you superior cut, abrasion, snag and puncture resistance and extended wear. Suggested applications: sharp edged objects, like glass, sheet metal, scrap metal or tin plate, slip-pery or smooth materials, or abrasive objects like lumber, tile, concrete blocks and brick. 21CFR, 170-199 compliant.Sold per pair or by 72/case.

Item. Description/Size. . 1-11. 12+Wrinkle.Finish

63NFW Knit Wrist, Fully Coated, Large $4.40 $3.6264NFW 10” Gauntlet, Fully Coated, Large $5.17 $4.2565NFW 12” Gauntlet, Fully Coated, Large $5.92 $4.8667NFW 14” Gauntlet, Fully Coated, Large $6.38 $5.2563PNFW Knit Wrist, Palm Coated, Large $4.40 $3.62L63PNFW Knit Wrist,Palm Coated, Small $4.40 $3.6266NFW Safety Cuff, Palm Coated, Large $4.70 $3.86

Predalite®.Lightweight.NitrileLightweight nitrile (NBR) rubber coat-ing for cut, abrasion, snag and puncture resistance. Thinner coating on 100% cotton interlock lining for a greater sense of touch and dexterity. Palm-coated with knit wrist.

Ideal for: light to medium fabrication, material handling, and maintenance.

Sold per pair or by 72/case. Please Specify Size: XS, S, M, L, XL

Item. Description. . 1-11. 12+9780 LightWeight, Knit Wrist $2.23 $2.14

•

Palm-Coated.Heavy.Nitrile.Driver’s style glove. Features an elastic, striped back to provide excellent cut, puncture, snag and abrasion resistance. Suggested applications: metal fabricating and grinding, or handling abrasives. Sold per pair or by 72/case. Please Specify Size: S, M, L, XL

Item. Description. . 1-11. 12+9740 Heavy Nitrile, jersey-lined driver $5.35 $5.12

TuffTex®.Work.Gloves.Rough-textured natural-rubber coating for greater gripping power and a higher degree of cut resistance Crinkle finish Ideal for: handling of sharp-edged materials such as glass or metal, or highly abrasive items, such as concrete blocks or lumber.

Sold per pair or by 72/case. Size: Men’s Large

Item. Description. . 1-11. 12+6820 Cotton Canvas Shell $3.52 $3.386845 12” Gauntlet $2.66 $2.55

•

••

Whizz-knit™.Seamless knit liner supported vinyl coated glovesPorous textured coating for breathability and easy gripping. Minimizes absorption of water, oil and grease. Versatile glove for hand protec-tion in small parts handling, construction, electronics assembly, shipping, receiving, assembly, maintenance, light fabrication, inspection and packaging. Sold per pair or 120/case. Please Specify Size: XS, S, M, L

Item. Description. . . 1-11. 12+9891 Whizz-knit™ $2.34 $2.24

HyliteRuggedness and Comfort for Medium-Duty ApplicationsHylite combines the comfort of a cotton lining and the exceptional snag, puncture, abrasion, and cut resistance of a nitrile coating in a medium-duty glove. The glove is a better alternative to cotton, light- to medium-duty leather, and PVC. For extra comfort, Hylite features an interlock knit lining, generous sizing, and a contoured design. Hylite gloves outwear cotton up to 12 to 1, light leather 5 to 1, and PVC-coated gloves 3 to 1.

Ideal for: assembly, inspection, medium-duty material handling, light fabrication, shipping and receiving and maintenance

Sold per pair. Please Specify Size: 7 (XS), 8 (S), 8.5 (M), 9 (L), 10 (XL)

Item. Description. . 1-11. 12+47-400 Palm coated, knitwrist $3.34 $2.8647-402 Fully coated, knitwrist $3.42 $2.9347-409 Fully coated, 4” w/ nitrile cuff $4.10 $3.51

•

how to choose the right glove - mallory co · pdf filehow to choose the right glove. 122...

Documents