high performance wax additives - pci mag · pdf filefluo ptfe ... high performance wax...

High Performance Wax AdditivesAdvanced technology with a quality difference

580 White Plains Road, Tarrytown, New York 10591 • Tel: (914) 793-4058, Fax: (914) 472-7098 • Email: [email protected]

MICRO POWDERS, INC.

For reliable quality and superb consistency in wax additives, formulators rely on Micro Powders®, the recognized leader in advanced wax technology. Our specialty products meet the demanding requirements of diverse markets, from paints, coatings and printing inks to ceramics, lubricants, adhesives and more. Our extensive range of micronized waxes, wax dispersions and wax emulsions brings the right solution to a vast array of applications, with reliable batch-to-batch consistency and superior performance values. Ongoing innovation keeps Micro Powders ahead of the curve in responding to industry trends. R&D takes place in our Advanced Applications Lab, staffed by chemists with many years experience in the industries we serve. The Micro Powders quality assurance system is certified to ISO 9001. Along with our technical expertise comes dedicated partnership support from our knowledgeable distributors worldwide and our own staff experts. Our advanced technology will make a quality difference in your products, and your profits.

MP Synthetic Waxes for lubricity and economy

MPP Polyethylene Waxes for rub and mar resistance

Fluo PTFE (Polytetrafluoroethylene) Waxes for high slip, mar and heat resistance

MicroMatte®/PropylMatte/AquaMatte® Waxes for uniform matting and scratch resistance

Micropro Waxes for anti-blocking and gloss control

Polyfluo®/Synfluo Waxes for slip and abrasion resistance

Polysilk® Waxes for improved slip, tape release and smooth surface

Superslip/Synslip/SuperGlide Waxes for high lubricity without PTFE

MicroKlear Waxes for abrasion resistance with gloss retention and clarity

Wax Emulsions for water repellency and moisture resistance

Aqua Waxes for all waterborne applications

Microspersion® Wax Dispersions “stir-in” wax dispersions

PropylTex® Waxes for texture and gloss control

NyloTex Waxes high melt point texture additives

AquaTex® Waxes texture and gloss control in waterborne systems

MicroTouch Products soft touch additives

Special-Effects Products for visual effects

Laser Diffraction Analysis ensures consistent particle size uniformity from batch-to-batch. Our wax additives are easily dispersed without prior melting or grinding. Product groups include:

Quality, Innovation and Partnership Support Since 1971

About MPI

Unique Products

High Performance Wax AdditivesAdvanced technology with a quality difference

Straight chain, fully saturated synthetic hydrocarbon waxes produced by the Fischer-Tropsch process. These products provide extra slip, scratch and rub resistance. They are effective and economical in most ink, paint and coating systems.

MP Synthetic Waxes

Often used in combination with micronized waxes to achieve higher surface lubricity, anti-blocking properties and lower cost. Our micronized PTFE (polytetrafluoroethylene) products are heat resistant and insoluble. The Fluo 625F-H and Fluo 750TX are special PTFE grades that provide various texture effects in powder coatings. Fluo X-1406 contains clusters of sub-micron particles which provide maximum lubricity in inks and coatings. MicroTex 121 is a combination of PTFE and polyethylene that provides uniform texturing and abrasion resistance in powder coatings.MicroTex 511 is a specially modified grade for economical texture effect.

Fluo PTFE Waxes

Fluo HTI-2>600>3162.21.0-2.0off-white15.563.0-5.0

Fluo 300>600>3162.21.0-2.0white22.05.0-6.0

Fluo 300XF>600>3162.21.0-2.0white15.562.0-4.0

Fluo 625F-H>600>3162.2N/Awhite44.013.0-21.0

Fluo 750TX>615>3252.2N/Awhite145.020.0-30.0

MicroTex® 511>600>3162.2N/Aoff-white124.020.0-25.0

MicroTex® 121230 – 244 110 – 118 1.02N/Aoff-whiteN/A<100

Typical PropertiesMelting Point °FMelting Point °CDensity at 25 °C (g/cc)NPIRI GrindColorMaximum Particle Size (µm)*Mean Particle Size (µm)*

Typical PropertiesMelting Point °FMelting Point °CDensity at 25 °C (g/cc)NPIRI GrindColorMaximum Particle Size (µm)*Mean Particle Size (µm)*

MICRO POWDERS, INC.

Laser Diffraction Analysis

Available as a waterborne dispersion

MP-15215-223102-1060.94N/A104.720.0-26.0

MP-22C215-223102-1060.942.0-3.022.06.0-8.0

MP-22VF215-223102-1060.942.0-3.522.06.0-8.0

MP-22XF215-223102-1060.941.5-3.022.04.5-6.5

MP-22XXF215-223102-1060.941.0-2.015.564.0-5.5

MP-28C219-230104-1100.963.0-4.022.06.0-8.0

Typical PropertiesMelting Point °FMelting Point °CDensity at 25 °C (g/cc)NPIRI GrindMaximum Particle Size (µm)*Mean Particle Size (µm)*

MP-22215-223102-1060.944.0-6.031.07.0-10.0

Fluo HT>600>3162.21.0-2.0off-white12.02.0-4.0

Fluo X-1406>600>3162.2N/Awhite22.04.0-6.0

Formulated to provide maximum rub and mar resistance, gloss retention and anti-block properties. Our polyethylene grades are versatile, with excellent recoatability, and allow higher processing temperatures than synthetic waxes.

MPP Polyethylene Waxes

MPP-230VF235-255113-1240.943.0-4.026.08.0-10.0

MPP-308F237-245114-1180.944.0-5.531.010.0-12.0

MPP-308VF237-245114-1180.943.0-4.026.08.0-10.0


MPP-620F237-241114-1160.954.0-5.031.07.0-9.0

MPP-620XF237-241114-1160.951.0-2.022.04.5-5.5

MPP-620XXF237-241114-1160.951.0-1.515.564.25-4.75

MPP-635G253-257123-1250.966.0-8.031.011.0-13.0


MPP-230F235-255113-1240.944.0-5.531.010.0-12.0

MPP-620VF237-241114-1160.952.0-3.022.05.0-7.0

MPP-611228-232109-1110.952.0-3.022.05.0-8.0

MPP-611XF228-232109-1110.951.0-2.022.04.0-6.0

MPP-635XF253-257123-1250.961.0-2.522.04.0-6.0

MPP-123230-235110-1130.924.0-6.031.010.0-12.0

MPP-635VF253-257123-1250.962.0-3.022.06.0-8.0

MPP-1241253-259123-1260.96N/A110.020.0-25.0

MPP-635F253-257123-1250.964.0-5.031.08.0-10.0

<0.3 (primary)

*

Formulated with Prime #1 Yellow Refined Carnauba Wax. MicroKlear grades are ideally suited where excellent slip, gloss and clarity are required. MicroKlear 116 and 295 are combinations of polyethylene and carnauba. MicroKlear 418 is 100% carnauba wax. MicroKlear 709 contains PTFE for maximum slip properties.

MicroKlear Waxes

MicroKlear 116225-235107-1130.971.5-2.515.564.0-5.0

MicroKlear 418178-18781-860.992.0-3.522.06.0-8.0


High Performance Wax AdditivesUnique combinations of polyethylene waxes and PTFE that provide a high degree of surface lubricity, abrasion resistance and film toughness. These proprietary formulations offer a synergistic combination of properties, for superior formulation flexibility in inks, paints, and coatings. Polyfluo maximizes performance efficiency in low viscosity systems.

Polyfluo® Waxes

Unique combinations of low molecular weight fatty waxes on a backbone of polyethylene. Polysilk is designed to bloom and provide excellent surface slip without the use of silicone. These additives give excellent tape release with scuff and mar resistance when used in solvent systems. Polysilk 14 and Polysilk 600 contain PTFE for added toughness and slip.

Polysilk® Waxes

Polysilk 14205-24596-1181.043.5-4.531.07.5-9.5

Polysilk 600205-22896-1091.082.0-3.022.05.0-7.0

Polysilk 750205-22896-1090.932.0-3.022.05.0-7.0


Special combinations of synthetic wax and PTFE designed to impart high levels of surface lubricity and scratch resistance to printing inks, paints and coatings. Synfluo is especially recommended for use in high gloss lacquers, can and coil coatings, as well as powder coatings. The Synfluo 283TXis an ideal texture effect additive for powder coatings.

Synfluo Waxes

Synfluo 168VF219-230104-1100.994.0-5.031.118.0-10.0

Synfluo 171VF219-230104-1101.002.0-3.022.04.0-7.0

Synfluo 172VF219-230104-1101.011.5-3.022.04.0-7.0

Synfluo 172XF219-230104-1101.011.0-2.518.53.5-6.0

Synfluo 178VF219-230104-1101.031.5-3.022.04.0-7.0

Synfluo 178XF219-230104-1101.031.0-2.011.03.0-5.0


Synfluo 180VF219-230104-1101.101.5-3.022.04.0-7.0

Synfluo 180XF219-230104-1101.101.0-2.011.03.0-5.0

Synfluo 283TX219-230104-1101.054.5-6.531.08.5-10.5

Polyfluo 400XF226-239108-1151.351.0-1.511.03.0-5.0

Polyfluo 535226-239108-1151.021.0-2.022.05.0-6.0

Polyfluo 535XF226-239108-1151.021.0-1.511.04.0-5.0

Polyfluo 540226-239108-1151.021.0-2.022.05.0-6.0

Polyfluo 540XF226-239108-1151.021.0-1.511.03.0-5.5


Polyfluo 400226-239108-1151.351.0-2.022.05.0-6.0

Polyfluo 523XF236-242113-1171.261.0-2.015.563.5-5.5

Polyfluo 150XF235-240113-1161.151.0-2.011.03.0-5.0

Polyfluo 302226-239108-1151.051.0-2.022.05.0-6.0


Polyfluo 120225-230107-1101.103.0-5.031.06.0-10.0

Polyfluo 150235-240113-1161.151.0-2.015.563.5-5.5

Polyfluo 200255-259124-1261.103.0-5.031.09.0-11.0

Polyfluo 190250-270121-1320.993.5-5.531.09.0-12.0

Polyfluo 190S250-270121-1320.993.0-4.031.06.5-8.5

MicroKlear 295219-230104-1100.972.0-3.022.04.0-6.0

MicroKlear 709246-255119-1241.102.0-3.0 22.04.0-6.0

Modified polypropylene waxes characterized by higher melt points and toughness. These products exhibit excellent surface slip, mar resistance, anti-blocking and gloss control, while improving metal marking resistance. They are useful for suspending silica additives and provide a non-abrasive smooth surface. Micropro 440W is specifically formulated for easy incorporation in waterborne systems. Micropro 700 contains PTFE for maximum slip properties.

Micropro Waxes

Superslip 6515255-278124-1370.952.0-3.022.06.0-8.0

Superslip 6515XF255-278124-1370.951.0-2.015.564.0-6.0

Superslip 6520275-289135-1430.962.0-3.022.06.0-8.0

Superslip 6525275-291135-1450.952.0-3.522.05.0-8.0

Superslip 6530255-275124-1350.952.0-3.522.06.0-7.5

Synslip 3750275-289135-1430.952.0-3.522.05.0-7.0

Synslip 3780275-289135-1430.962.0-4.022.05.0-8.0

SuperGlide 904280-293138-1450.972.0-4.022.04.0-7.0

SuperGlide 904XF280-293138-1450.971.0-2.015.563.0-5.0


Combinations of polyolefins and amides designed to impart increased lubricity, scratch resistance and anti-blocking without the use of PTFE. They also impart an excellent “feel” or smoothness to a coating.

Superslip, Synslip and SuperGlide Waxes

Micropro 200284-289140-1430.953.0-5.031.06.0-11.0

Micropro 400284-289140-1430.932.0-3.522.04.5-7.5

Micropro 700300-309149-1541.042.0-3.022.05.0-7.0

Micropro 500286-290141-1430.942.0-3.522.04.5-7.5

Micropro 600295-300146-1490.933.0-4.022.06.0-9.0

Micropro 600VF295-300146-1490.932.0-3.522.05.0-8.0


Micropro 440W302-313150-1560.943.0-5.031.07.0-10.0

Micromide Waxes

Micromide 520286-293141-1450.971.5-3.022.05.0-8.0

Micromide 520XF286-293141-1450.971.0-2.015.563.0-5.0


Finely micronized vegetable derived EBS waxes. Our Micromide grades feature extremely fine particle control with excellent blooming properties. These waxes provide surface slip, scratch and mar resistance as well as some gloss control.

Finely micronized wax polymers specifically formulated to produce a water “beading” effect. These unique powder compositions combine the synergistic properties of several waxes to produce immediate, consistent and long-lasting water beading and weather resistance.

AquaBead® Waxes

AquaBead 519140-14560-63259-270126-1320.912.0-3.022.06.0-8.0

AquaBead 916147-15364-67262-270128-1320.931.5-2.522.07.0-9.0

Typical PropertiesSoftening Point °FSoftening Point °CMelting Point °FMelting Point °CDensity at 25 °C (g/cc)NPIRI GrindMaximum Particle Size (µm)*Mean Particle Size (µm)*

These grades provide uniform and efficient gloss reduction with optimum resistance to burnishing. MicroMatte 1011 UVW and MicroMatte 1213 UVWare specially modified waxes incorporating microencapsulated inorganics to eliminate flotation, for enhanced stability in waterborne and UV systems. MicroMatte 2000 is a hybrid polypropylene that reduces gloss while maintaining excellent clarity. PropylMatte 31 and PropylMatte 450 are produced from 100% polypropylene and provide consistent matting with minimal effect on viscosity. PropylMatte 31HD is a high density version modified for optimal in-can stability in waterborne systems. AquaMatte products are high density oxidized polyolefins designed for ease ofdispersability and stability in waterborne systems.

MicroMatte®, PropylMatte and AquaMatte® Waxes

MicroMatte1011 UVW

302-313150-1561.072.0-3.522.05.0-7.5

MicroMatte2000

295-300146-1490.942.0-4.022.06.0-9.0

PropylMatte450

288-298142-1480.905.0-6.031.08.0-12.0

Typical Properties

Melting Point °FMelting Point °CDensity at 25 °C (g/cc)NPIRI GrindMaximum Particle Size (µm)*Mean Particle Size (µm)*

MicroMatte1213 UVW

302-313150-1561.112.0-3.522.05.0-7.5

PropylMatte31

320-338160-1700.895.0-6.031.08.0-12.0

AquaMatte26HD

221-232105-1111.073.0-4.026.06.0-8.5

PropylMatte31HD

320-338160-1701.075.0-6.031.08.0-12.0

AquaMatte22

274-284135-1400.992.0-3.022.06.0-8.0

AquaMatte31

274-284135-1400.995.0-6.031.08.0-12.0

Specifically modified for easy incorporation and stability in waterborne inks, paints and coatings. Aquawax 214 and Aquawax 214VF are hard, high melt point micronized synthetic waxes. AquaPoly 215 grades are economical polyethylene waxes. AquaPoly 250 is a hard, high density and high molecular weight polyethylene polymer that imparts excellent scratch, rub and mar resistance, while reducing potential wax defoamer kickout. AquaPolyfluo 411 and AquaPolysilk 19 contain PTFE for increased lubricity and scratch resistance. AquaSuperslip 6550 imparts maximum lubricity and block resistance.

Aqua Waxes

Aquawax 214VF220-225104-1070.962.0-3.522.05.0-7.5


AquaPoly 215VF221-232105-1110.952.0-3.522.05.0-7.5

Microspersion 440WMicropro 440W 40.0%Acrylic/8.9%48.9%8.510001.024.0-5.07.0-10.0

Microspersion 520Micromide 52034.0%None34.0%10.0751.00NA5.0-8.0

Microspersion 523Polyfluo 523XF40.0%None42.5%10.015001.091.0-2.53.5-5.5

Microspersion 930PE Hybrid35.0%None35.5%9.515000.985.0-6.09.0-11.0

Microspersion 1406Fluo X-140650.0%None52.6%7.540001.400<1.0

Microspersion HTFluo HT50.0%None54.5%9.0-10.560001.501.0-2.02.0-4.0

Microspersion 620-50MPP-620VF50.0%None52.0%8.040000.992.5-3.55.0-7.0

Typical PropertiesDry Wax IDWax SolidsResin Type/SolidsTotal SolidspHViscosity at 25°C (cP)Density at 25 °C (g/cc)NPIRI GrindMean ParticleSize (µm)

Aqueous dispersions of Micro Powders micronized waxes. Designed for ease of incorporation and optimum performance, the Microspersion grades enable the use of highly efficient micronized waxes in a liquid form. The products listed below include some of our more popular grades.For a complete listing visit our website.

Microspersion 22-50MP-2250.0%None52.5%9.035000.954.0-6.07.0-10.0

Microspersion 22AQ-50AquaMatte 2250.0%None50.9%7.530001.002.0-3.06.0-8.0

Microspersion 31HD-40PropylMatte 31HD40.0%None42.1%8.540001.035.0-6.08.0-12.0

Microspersion 31AQ-50AquaMatte 3150.0%None51.5%7.030001.005.0-6.08.0-12.0

Microspersion 190-50Polyfluo 19050.0%None52.5%9.055001.003.0-5.09.0-12.0

Microspersion 250-50AquaPoly 250 50.0%None50.0%8.550001.025.0-6.08.0-10.0

Typical PropertiesDry Wax IDWax SolidsResin Type/SolidsTotal SolidspHViscosity at 25°C (cP)Density at 25 °C (g/cc)NPIRI GrindMean ParticleSize (µm)

Microspersion 215-50AquaPoly 215 50.0%None51.0 %7.530000.954.0-6.09.0-11.0

Microspersion 411-50AquaPolyfluo 41150.0%None52.5%9.025001.045.0-6.06.0-8.0

AquaPoly 215F221-232105-1110.953.0-4.026.166.0-8.5

Aquawax 214220-225104-1070.964.0-6.031.09.0-11.0

AquaPoly 215221-232105-1110.955.0-6.031.09.0-11.0


AquaPoly 250243-253117-1230.984.0-5.031.08.0-10.0

AquaPolyfluo 411243-253117-1231.102.5-3.522.06.0-8.0

AquaPolysilk 19215-245102-1181.063.5-4.531.09.0-11.0

AquaSuperslip 6550255-275124-1350.942.0-3.522.05.0-7.5

Microspersion® Wax Dispersions

Sub-micron aqueous emulsions formulated using a combination of waxes. The AquaBead grades are designed to produce a water beading effect as well as long-lasting water repellency in aqueous paints, stains, and coatings. The AquaKlean grades provide excellent scrubbability and burnish resistance in architectural interior and exterior wall paints, coatings, stains, and sealers. Microspersion 91E is a polypropylene emulsion designed to increase COF in waterborne floor finishes, inks, and OPV’s. Microspersion 504E is a large particle size PE emulsion for aqueous inks and coatings. Microspersion 526E is a modified PE emulsion that provides optimum surface protection while maintaining excellent gloss and film clarity.

Wax Emulsions

AquaBead 270E40.0%50010.0Moderate***

0.95

AquaBead 325E63.0%1008.5No***

0.93

AquaBead 525E30.0%50010.5Moderate***

0.97

AquaBead 525E-AM 30.0%50010.5Excellent***

0.97

Typical PropertiesSolidsViscosity at 25°C (cP)pHFreeze/Thaw Stability

Density at 25 °C (g/cc)

*** Protect From Freezing

AquaKlean 40230.0%50010.5Excellent***

0.97

AquaKlean 40330.0%1009.5Moderate***

0.99

AquaKlean 41835.0%505.0Good***

1.00

Microspersion 504E40.0%5008.5Moderate***

0.99

Microspersion 526E25.0%<509.5-10.5Moderate***

0.98

Microspersion 91E40.0%509.0Moderate***

0.99

Microspersion 19Aquapolysilk 1925.0%Acrylic/12.3%37.3%8.545001.024.0-5.09.0-11.0

AquaTex grades are based on high density oxidized polyethylene. They are ideally suited for waterborne texturizing applications where excellent dispersibility and reduced flotation are desired. NyloTex grades are micronized polyamide (Nylon 6) that exhibit a higher melt point than standard polyolefins, making them ideal for higher temperature texture applications. NyloTex grades offer exceptional wear and durability in performance coatings.

AquaTex® and NyloTex Waxes

NyloTex 20425-435218-2241.14840.0(20 mesh)N/A

NyloTex 50425-435218-2241.14300.0(50 mesh)160-180

NyloTex 140425-435218-2241.14105.0(140 mesh)45.0-65.0

NyloTex 200425-435218-2241.1474.0(200 mesh)30.0-50.0

Typical PropertiesMelting Point °FMelting Point °CDensity at 25 °C (g/cc)Maximum Particle Size (µm)**

Mean Particle Size (µm)*

AquaTex 100274-284135-1400.99149.0(100 mesh)80.0-100.0

AquaTex 140274-284135-1400.99105.0(140 mesh)45.0-55.0

AquaTex 200274-284135-1400.9974.0(200 mesh)35.0-45.0

AquaTex 230274-284135-1400.9963.0(230 mesh)36.0-40.0

AquaTex 270274-284135-1400.9953.0(270 mesh)15.0-25.0

AquaTex 325274-284135-1400.9944.0(325 mesh)11.0-15.0

PropylTex® Waxes

These specialty grades fulfill a wide variety of end uses. PolyBlends offer unique combinations of micronized polyethylene and PTFE waxes. Propylfluo 824 optimizes the toughness of polypropylene in combination with PTFE. NyloFine 1000 is a fine particle size aromatic polyamide powder designed for high specification abrasion resistance. Microscrub 50 is a coarse particle size polyethylene exfoliating agent for industrial hand cleaners. Microspersion EZ is an advanced wetting and dispersing agent for waterborne systems based on proprietary surfactant technology.

Specialty Products


Typical PropertiesActive ContentViscosity

Polyblend 100XF230-240110-1161.021.0-2.022.04.0-6.0

Polyblend 200XF253-257123-1251.021.0-2.022.05.0-6.0

Propylfluo 824302-320150-1601.042.0-3.022.05.0-7.0

Nylofine® 1000 >534>2791.19N/A31.06.0-10.0

Microscrub® 50225-229107-1090.95N/A297.0N/A

Microspersion® EZ~50%300-500 cps

** Typical Values By Screen Analysis

Micro Powders offers a wide variety of colored beads for special effects in multi-color paints and coatings. Applications include architectural wall paint, aerosol paint, floor finishes and craft paint. MicroGranite 100, a unique combination of pigmented polymers, imparts a granite-like effect to all types of paints and coatings.

Special-Effects Products

Typical PropertiesMelting Point °FMelting Point °CDensity at 25 °C (g/cc)Color/AppearanceMaximum Particle Size (µm)**


MicroGranite 100239-248115-1200.99Granite149.0(100 mesh)85.0-115.0

MicroBlack 1005 250-261121-1270.99Black149.0(100 mesh)95.0-115.0

MicroWhite 1005250-261121-1270.99White149.0(100 mesh)95.0-115.0

xMicrospeX Products248-284120-140 0.90Various1680.0(12 mesh)N/A

x MicrospeX products are available in the following colors: Millstone, Sandstone, Pink Granite and Green Marble.

MicroTouch 800F1.05120.025.0-35.0

MicroTouch 800VF1.0560.012.0-16.0

MicroTouch 800XF1.0531.07.0-9.0

MicroTouch 850XF1.0231.05.0-8.0

Typical PropertiesDensity at 25 °C (g/cc)Maximum Particle Size (µm)Mean Particle Size (d50, µm)

MicroTouch ProductsBased on polyurethane technology, these highly resilient products can be used to modify and enhance the tactile properties of acoatings system from satiny smooth to leathery to rubbery. MicroTouch additives will provide a matte appearance and deliver excellent scratch, burnish, and mar resistance.

Micronized polypropylene designed to produce unique texturizing effects in paints and coatings. The low density and insolubility characteristics of PropylTex will reduce or eliminate settling and provide optimum durability in both waterborne and solvent systems. Coarse PropylTex grades are ideal for walking surfaces and other nonskid coating applications. Finer particle size grades can be used to reduce gloss in higher film build coatings.

PropylTex 14330-335166-1680.901410.0 (14 mesh)N/A

PropylTex 20330-335166-1680.90840.0 (20 mesh)270.0-300.0

PropylTex 30330-335166-1680.90594.0 (30 mesh)N/A

PropylTex 100S320-338160-1700.89149.0(100 mesh)80.0-100.0

PropylTex 140S 320-338160-1700.89105.0(140 mesh)45.0-55.0

PropylTex 200S320-338160-1700.8974.0(200 mesh)35.0-45.0

PropylTex 325S320-338160-1700.8944.0(325 mesh)11.0-15.0

Typical PropertiesMelting Point °FMelting Point °CDensity at 25 °C (g/cc)Maximum Particle Size (µm)**


Narrow Mean Particle Range(s) Available

PropylTex 270S 320-338160-1700.8953.0(270 mesh)15.0-25.0

PropylTex 230S 320-338160-1700.8963.0(230 mesh)36.0-40.0

PropylTex 200SF 320-338160-1700.8974.0(200 mesh)25.0-35.0

PropylTex 50330-335166-1680.90300.0(50 mesh)160.0-180.0

S A HR M G

W S M G

W S M G

W S M G A

S T MM HR GC

S A M G

GC MM A H

S GC M

GC MM A

S M HR MM

GC A T M

S H A W

A M MM H

S A HR G H

S A W

S A M H GC

S A HR G H

T M GC H

What’s Your Application?

The information contained herein is to the best of our knowledge true and correct and any suggestions are made without guarantee, express or implied, since conditions of use are beyond our control. Micro Powders, Inc. disclaims any liability incurred in connection with the use of any data or suggestions. Nothing contained herein shall be construed as a recommendation to infringe on any existing patents covering any material or its use.

04/15

MPI Quality Program Certified to ISO 9001

www.micropowders.com

Polyfluo Waxes

MP Synthetic Waxes

Microspersion WaxDispersions

MPP PolyethyleneWaxes

Superslip, Synslip &SuperGlide Waxes

Addition Level Key: Percentage is based on total formula weight

S = Slip / LubricityA = Abrasion ResistanceGC = Gloss ControlH = HardnessT = Texture

Benefits Key:

M = Mar ResistanceMM = Metal MarkingHR = Heat / Blocking ResistanceG = Gloss RetentionW = Water Repellency

= 0.25 - 1.0%

= 1.0 - 2.0%

= 1.0 - 3.0%

= 2.0 - 3.0%

= Above 3.0%

Polysilk Waxes

Synfluo Waxes

Lubr

icant

s

Aque

ous

Solve

nt

UV &

EB

Rubb

er A

dditi

ves

Perfo

rman

ceBe

nefit

s

Polis

hes

Aqua Waxes

MicroKlear Waxes

Micromide Waxes

Micropro Waxes

MicroTouch Products

AquaBead Waxes

Fluo Waxes

AquaBead WaxEmulsions

AquaKlean WaxEmulsions

MicroMatte &PropylMatte Waxes

PropylTex, AquaTex &NyloTex

Aque

ous:

Film

Solve

nt: F

ilmAq

ueou

s: Pa

per

Solve

nt: P

aper

Publ

icatio

n

IR/S

heet

Fed

Heat

Set

Ultra

violet

Can &

Cont

ainer

Aque

ous:

Met

alSo

lvent

: Met

al

Powd

er

Aque

ous:

Woo

dSo

lvent

: Woo

d

Floor

Arch

itectu

ral

Trim

Pain

ts

Aque

ous

Solve

nt

Liquid Inks Offset Inks Stains MiscellaneousPaint & Coatings Lacquers Benefits


The data contained in this brochure are considered typical properties and are not to be considered specifications. Please contact Micro Powders directly for official product specifications.

MICRO POWDERS, INC.

ADDITIVES FOR TEXTURE COATINGS

PropylTex 20

Mesh Size: 20Particle Size (μm): Maximum 840 Mean 270-300Melt Point: 166-168°C

Density: 0.90 g/cc

PropylTex 30


Density: 0.90 g/cc

PropylTex 50


Density: 0.90 g/cc

PropylTex 100S


Density: 0.89 g/cc

PropylTex is a product series based on micronized polypropylene, and is our most comprehensive line of texturing agents. The coarser

grades of PropylTex provide a range of texture effects varying from subtle to aggressive, while the fi ner grades are often used to reduce gloss,

especially in applications with a high dry fi lm thickness. These fi ner grades are superior to silica-based additives as they do not affect coat-

ing rheology and provide substantially better resistance to burnishing and abrasion. For even fi ner gloss reduction grades, please refer to our

PropylMatte products.

PropylTex will also impart a smoother surface feel when compared to inorganic texturing agents. The low density of polypropylene

provides an additive that will not settle as with silica-based products. These factors, along with a high degree of solvent resistance, make

PropylTex an excellent choice for all solvent based coating systems, including those containing aromatic solvents.

Coarse grades of PropylTex provide a non-skid surface effect with a higher COF compared to other polymeric texturing agents,

making them the perfect choice for coatings designed for walking surfaces.

PropylTex grades are commonly added at levels from 3% to 10% based on total formula weight in the following applications:

• Concrete and fl oor coatings.............................................PropylTex 20, 30, 50, 100S and 140S*

• Wood coatings.................................................................PropylTex 200S, 200SF, 230S* and 270S*

• Interior architectural coatings..........................................PropylTex 100S, 140S*

• Laminated board coatings...............................................PropylTex 200S, 230S* and 270S*

• OEM metal coatings........................................................PropylTex 140S*, 200S and 230S*

• Matte fi nishes for plastics................................................PropylTex 270S* and 325S

PROPYLTEX WAXES

PropylTex 270S


Density: 0.89 g/cc

PropylTex 325S


Density: 0.89 g/cc

PropylTex 140S


Density: 0.89 g/cc

PropylTex 200S


Density: 0.89 g/cc

PropylTex 200SF


Density: 0.89 g/cc

PropylTex 230S

Mesh Size: 230Particle Size (μm): Maximum 63 Mean 36-40Melt Point: : 160-170°C

Density: 0.89 g/cc

MICRO POWDERS, INC.

continued on next page

* Special Narrow Mean Particle Size Ranges Also Available.

NyloTex 20


Density: 1.14 g/cc

NyloTex 50


Density: 1.14 g/cc

NyloTex 140


Density: 1.14 g/cc

NyloTex 200


Density: 1.14 g/cc

AquaTex is a product series based on micronized oxidized polyethylene, making it especially useful in waterbased systems. The density of AquaTex

is nearly identical to water (1.0), resulting in a product that does not settle and has minimal to no fl otation, depending on coating viscosity. The oxida-

tive functionality of AquaTex makes incorporation into waterbased systems easier and faster.

AquaTex is offered in many different particles sizes to provide the texture effect you desire. The fi ner particle size grades of AquaTex will provide

optimum abrasion resistance, gloss control, and will be less abrasive when compared to silica. For even fi ner gloss reduction grades, please refer to

our AquaMatte products. AquaTex grades also provide scratch and burnish resistance, making them an excellent choice for architectural coatings.

AquaTex grades are commonly added at levels from 3% to 10% based on total formula weight in the following applications:

• Interior architectural wall paints........................................AquaTex 230, 270 and 325

• Micro-texture overprint varnishes for packaging............. AquaTex 270 and 325

• General industrial and maintenance texture paints..........AquaTex 100, 140 and 200

• Various matte waterborne fi nishes...................................AquaTex 230, 270 and 325

• General gloss reduction....................................................AquaTex 270 and 325

AQUATEX WAXES

AquaTex 200


Density: 0.99 g/cc

AquaTex 230


Density: 0.99 g/cc

AquaTex 270


Density: 0.99 g/cc

AquaTex 325


Density: 0.99 g/cc

AquaTex 100


Density: 0.99 g/cc

AquaTex 140


Density: 0.99 g/cc

NyloTex is a product series based on micronized polyamide (Nylon 6). NyloTex provides the highest melting point of any of

our texture additives, making it suitable for higher temperature applications. NyloTex will impart a consistent texture at high

baking temperatures in applications that include coil and powder coatings.

For gloss reduction in high temperature coatings, please inquire about our Nylofi ne 1000 additive.

NyloTex grades are commonly added at levels from 3% to 10% based on total formula weight in the following applications:

• Concrete and fl oor coatings.............................................NyloTex 20, 50 and 140

• Coil and powder coatings................................................NyloTex 200

• Topcoats for seamless vinyl and composite fl ooring.......NyloTex 200

• Slip resistant, high fi lm build coatings............................ NyloTex 20 and 50

NYLOTEX WAXES

MICRO POWDERS, INC.MPI Quality Program Certified to ISO 9001

The information contained herein is to the best of our knowledge true and correct and any suggestions are made without guarantee, express or implied, since conditions of use are beyond our control. Micro Powders, Inc. disclaims any liability incurred in connection with the use of any data or suggestions. Nothing contained herein shall be construed as a recommendation to infringe on any existing patents covering any material or its use. 1-09/15



Contact us for a complete brochure which includes sample chips for each of the products that are listed.

MICRO POWDERS, INC.

COATINGS

ADDITIVES FORTEXTURE

MicroTouchSoft Touch Coating Additives

Typical Properties MicroTouch 800F

MicroTouch 800VF

MicroTouch 800XF

MicroTouch 850XF

Density @ 77 °F (25 °C) 1.05 1.05 1.05 1.02

Maximum Particle Size (μm) 120 60 31 31

Mean Particle Size (d50, μm) 22-30 11-15 6-9 5-9

PRODUCT GUIDE

Formulation Guide

page 1

INTRODUCTION

Coating formulators now have the ability to modify the tactile surface properties of their products with MicroTouch. Based on aliphatic polyurethane technology, MicroTouch additives are micron-sized elastic particles that distort when disturbed by a physical force (such as fi nger touch or abrasive action) and then return to their original spherical shape when the force is removed. These products can be used in combination with many different types of coating resins to achieve effects that range from satiny smooth to leathery to rubbery. MicroTouch additives are highly resilient particles that can be used to modify and enhance the feel of a coating surface. These additives will provide a matte appearance as well as superior scratch, burnish, and mar resistance. MicroTouch additives are available in several particle sizes, each of which brings different tactile properties. MicroTouch additives are an ideal alternative to formaldehyde-based materials such as polyureas.

MicroTouch additives will improve chemical resistance and hydrolytic stability. Taber abrasion resistance can be dramatically improved with an addition of 2-3% of MicroTouch.

MicroTouch additives can be used to modify coatings designed for plastics, metals, paper, wood, leather, and other textiles. Common industrial applications include electronics (computers, laptops, mobile phones), automotive interiors, wall coverings, parquet and vinyl fl ooring, inks, and furniture.

FORMULATION NOTESIt is important to understand that the ultimate “feel” of a coating formulated with MicroTouch is highly dependent on the choice of resin system. Harder resin systems formulated with MicroTouch will provide a surface with a smooth, satiny feel. Softer resin systems can provide surfaces that have a rubbery, anti-slip feel. Lower percentages (2-6%) of MicroTouch will provide gloss reduction and

abrasion resistance with limited tactile effects. At higher percentages (6-10%), more pronounced tactile properties can be achieved.

The formulated examples presented in this brochure demonstrate some of the tactile effects that can be achieved by combining MicroTouch additives with different types of coating resins. These examples should not be considered as fully formulated commercial coatings. They are presented strictly to show the range of soft touch effects that can be achieved.

PROCESSING NOTESMicroTouch additives are virtually indestructible and are easy to incorporate into coatings with an impeller disk disperser such as a Conn ITT blade (or similar). A tip speed of around 3-3.5 m/s should be suffi cient to wet and disperse the product into a coating. In solvent based systems, additional shear energy may be required to disperse and deagglomerate the product.

HIGH TEMPERATURE AND SOLVENT BASED APPLICATIONS MicroTouch additives are suitable for applications with curing temperatures up to100-120 °C. For applications in the120-140 °C range, the products may show some yellowing. Applications exceeding 140 °C are not recommended as the particles will swell and/or stick together.

MicroTouch additives will swell and absorb solvent if slurried directly into alcohol (ethanol, isopropanol) or other highly polar solvents. They should instead be dispersed into the alcohol based resin system to disperse and stabilize the particles.

MicroTouch additives should not be used in coating systems based on dimethylformamide (DMF) as the particles will swell signifi cantly.

Pebbly Feel Using MicroTouch 800FFORMULAS

GLOSS REDUCTION DATA

Micro Powders, Inc.580 White Plains Rd Tarrytown, NY 10591 Tel: (914) 793-4058 Email: [email protected] Web: micropowders.com

page 204/15

Formula: Wt %: Product: Supplier:AlberdingkUSA® U 2101 92.6% 60.5% solids PUD Alberdingk-BoleyMicroTouch 800F 7.4% polymeric additive Micro Powders, Inc.

Total: 100.0% (wet applied film thickness: 0.003"; 76μm)

Formula: Wt %: Product: Supplier:

Witcobond® W-505 92.6% 40.0% solids PUD Chemtura

MicroTouch 800VF 7.4% polymeric additive Micro Powders, Inc.


Formula: Wt %: Product: Supplier:AlberdingkUSA® U 2101 26.0% 60.5% solids PUD Alberdingk-BoleyUrotuf® L63-MPW-38 61.0% 38.0% solids PUD Reichhold Inc.MicroTouch 850XF 13.0% polymeric additive Micro Powders, Inc.


Formula: Wt %: Product: Supplier:AlberdingkUSA® U 2101 45.5% 60.5% solids PUD Alberdingk-BoleyBayhydrol® UH 240 45.5% 40.0% solids PUD BayerMicroTouch 800XF 9.0% polymeric additive Micro Powders, Inc.


Rubbery Feel Using MicroTouch 800XF

Fuzzy Feel Using MicroTouch 800VF

Silky Feel Using MicroTouch 850XF

*Based on total formula weight

MT = MicroTouch Control w/MT Control w/MT Control w/MT Control w/MT

% additive*: 0 7.4 0 7.4 0 9 0 13

Gloss 20° 15 7 56 1 18 1 4 0.5

Gloss 60° 52 27 83 7 52 9 27 5Gloss 85° 66 22 93 4 79 30 80 30

Pebbly RubberyFuzzy Silky

High-performance Wax Additives for

Architectural

Paints & Coatings

MICRO POWDERS, INC.

26843_MPI_Architect Broch2AC0313_R1_26843 Architect Broch 3/6/13 5:37 PM Page 2

AquaMatte® 31 / AquaMatte® 22

High molecular weight oxidized polyolefins for optimumgloss reduction and smooth film characteristics.

AquaKlean Series

Aqueous wax emulsions for water repellency, stain resistance and washability when used in waterborne walland trim paints.

MP-22 / MP-22XF

Synthetic paraffin wax for exterior wood stains to increasethe longevity of the water beading effect.

Micropro 400

Unique, modified polypropylene wax for weather protec-tion and resistance to chalking in lower gloss applications.

AquaBead® Series

Aqueous wax emulsions for water repellency and stainresistance in waterborne wood and concrete sealers.

ArchitecturalApplications

Interior

PropylTex Series

A full range of highly durable polypropylene texture addi-tives that are used in wall paints to create unique structureeffects.

AquaTex Series

High molecular weight oxidized polyolefin texture andmatting additives for waterborne paints. Available in a fullrange of particle sizes for custom texture effects.

PropylMatte 31

Micronized polypropylene for optimum mar and burnish resist-ance in waterborne wall and trim paints. Lightweight replace-ment for inorganic fillers. Very low demand for vehicle.

Wood & Concrete Sealers

*see recommended addition levels on the back cover

PropylMatte 31 / PropylMatte 450

High molecular weight polypropylene that imparts excel-lent gloss control and scuff resistance in wood and con-crete floor sealers.

PropylTex 20 / PropylTex 50

Extremely durable 20 and 50 mesh polypropylene for alltypes of non-slip wood and concrete floor finishes. Theselight weight wax polymers easily stir into paints and willnot settle.

Micro Powders, Inc., the recognized leader in innovative wax technology, prides itself in developing unique additives to meetthe demands of its customers and their varied applications. This bulletin highlights a broad range of products which willenhance the appearance and performance of architectural paints and coatings. The key performance benefits and recommended addition levels of selected products are provided. The typical method of incorporation is to add MicroPowders’ micronized waxes to the formula at the let-down stage (no extra milling or grinding required). We also offer aqueous dispersions of our micronized waxes where a liquid product is preferred.

Interior paints require burnish resistance and in many cases, gloss reductionalong with washability. These products provide those attributes while exhibitinga low demand for vehicle – an important factor for the new low VOC paints.

Micronized waxes from Micro Powders are essential ingredients in these systems, which include waterborne and solvent con-crete sealers and exterior wood protection products. Water beading is quick and dramatic with a long lasting effect.


Exterior

AquaTex Series

A full range of oxidized polyolefins in various particlesizes for custom texture effects.

AquaBead® 519

Specially formulated blend of natural and syntheticwaxes for immediate and long-term water repellency.

Micropro 400

Modified polypropylenewax for scuff resistance andmatting in lower glossapplications.

Varnishes

Polyfluo® 190

Low density, high molecular weight polyethylene combined with PTFE for optimum abrasion resistance without slip. Ideal for wood floors.

SuperGlide 904

Modified amide wax for scratch and mar resistance alongwith a silky surface feel.

Synfluo 172VF

Cost effective combination of synthetic wax and PTFE.Imparts an abrasion resistant surface while maintaininggloss and a smooth feel.


Exterior paints and sealers are often very soft because of the low VOC content andrequired coalescing properties. Micro Powders’ micronized waxes can add apparenthardness and soil rejection without raising viscosities or increasing the demand for vehicle. These waxes can actually improve long-term chalking properties.

These clear systems are very popular for use on floors, trim, furniture and other DIY applications. Micronized waxes areused for toughness, scratch resistance, smoothness to the hand, clarity and gloss reduction. A wide variety of products areavailable from Micro Powders.

PropylMatte 31

High molecular weight polypropylene that imparts excel-lent gloss control and scuff resistance in wood floor finishes.

AquaMatte® 31 / AquaMatte® 22

High molecular weight oxidized polyolefins that impartexcellent gloss reduction and scratch resistance in all typesof wood varnishes. AquaMatte 22 provides good clarityand a smooth surface feel.

MicroMatte® 1213 UVW / 1011 UVW

Unique, modified polypropylene wax that provides excellent scratch resistance, smooth surface feel and glossreduction. Densified to eliminate flotation.

Trim

AquaPolyfluo 411

Micronized, modified polyolefin waxcombined with PTFE. Ideal for interiortrim paints to maintain gloss andimprove block resistance.

Polyfluo® 190

Low density, high molecular weight polyethylene combined with PTFE toimpart block and abrasion resistance ingloss to semi-gloss trim paints.

AquaPoly 215VF

Unique, economical oxidized polyethylene wax for smooth feeland block resistance in waterbornetrim paints. Excellent scrubability.

Aquawax 214

Oxidized, micronized synthetic waxsuitable for exterior trim and joinerypaints.

Both interior and exterior trim paints demand excellent gloss and block resistance. In some cases, low gloss is required.These Micro Powders’ waxes are ideal for improving these properties while not affecting viscosities.


About Micro Powders

Micro Powders, Inc. has been developing and manufacturing innovative speciality micronized waxes, wax dispersions and emulsions since 1971. Today we offer more than 150 state-of-the-art products specifically created for the paint, printing ink and coatings markets. These sophisticated wax additives helpformulators develop enhanced surface coatings.

Product Highlights

The information contained herein is to the best of our knowledge true and correct and any suggestions are made without guarantee, express or implied, since conditions of use arebeyond our control. Micro Powders, Inc. disclaims any liability incurred in connection with the use of any data or suggestions. Nothing contained herein shall be construed as a recom-mendation to infringe on any existing patents covering any material or its use.

Product Wax Type(s) Melt Point (°C) Density *Mean Particle *Maximum Particle **Recommended(g/cc@25°C) Size (microns) Size (microns) Addition Levels

AquaBead® Series Emulsion N/A 0.94-0.96 N/A N/A 3.0-10.0%

AquaBead® 519 Combination 126-132 0.91 6.0-8.0 22.0 1.0-4.0%

AquaKlean Series Emulsion N/A 0.96-0.99 N/A N/A 3.0-10.0%

AquaMatte® 22 Oxidized Polyethylene 135-140 0.99 6.0-8.0 22.0 2.0-5.0%

AquaMatte® 31 Oxidized Polyethylene 135-140 0.99 8.0-12.0 31.0 2.0-5.0%

AquaPoly 215VF Polyethylene 105-111 0.95 5.0-7.5 22.0 0.5-2.0%

AquaPolyfluo 411 PE/PTFE 117-123 1.10 6.0-8.0 22.0 0.5-2.0%

AquaTex Series Oxidized Polyethylene 135-140 0.99 wide range available 5.0-10.0%

Aquawax 214 Synthetic 104-107 0.96 9.0-11.0 31.0 0.5-1.5%

MicroMatte® 1011 UVW Polypropylene 150-156 1.07 5.0-7.5 22.0 2.0-4.0%


Micropro 400 Polypropylene 140-143 0.93 4.5-7.5 22.0 2.0-4.0%

MP-22 Synthetic 102-106 0.94 7.0-10.0 31.0 1.0-3.0%

MP-22XF Synthetic 102-106 0.94 4.5-6.5 22.0 1.0-3.0%

Polyfluo® 190 PE/PTFE 121-132 0.99 9.0-12.0 31.0 1.0-2.0%

PropylMatte 31 Polypropylene 160-170 0.89 8.0-12.0 31.0 2.0-4.0%


PropylTex 20 Polypropylene 166-168 0.90 270.0-300.0 840.0 3.0-10.0%

PropylTex 50 Polypropylene 166-168 0.90 160.0-180.0 300.0 3.0-10.0%

PropylTex Series Polypropylene 160-170 0.89-0.90 wide range available 3.0-10.0%

SuperGlide 904 PE/Amide 138-145 0.97 4.0-7.0 22.0 0.5-3.0%

Synfluo 172VF Synthetic/PTFE 104-110 1.01 4.0-7.0 22.0 0.5-2.0%

*Laser diffraction analysis. **Based on total formula weight.

MICRO POWDERS, INC.

580 White Plains Road • Tarrytown • New York 10591 TEL 914-793-4058 • FAX 914-472-7098 • EMAIL [email protected]

2AC0313MPI Quality Program Certified to ISO 9001


Industrial Coatings

Product Highlights

Industrial Coatings

About Micro PowdersMicro Powders, Inc. has been developing and manufacturing innovative specialtymicronized waxes, wax dispersions and emulsions since 1971 and now proudly offersmore than 150 unique and state-of-the-art products. Specifically created for the paint,printing ink and coatings markets, these wax additives help formulators developimproved and advanced surface coatings.




MPI Quality Program Certified to ISO 9001 2-IC0414

The information contained herein is to the best of our knowledge true and correct and any suggestions are made without guarantee, express or implied, since conditions of useare beyond our control. Micro Powders, Inc. disclaims any liability incurred in connection with the use of any data or suggestions. Nothing contained herein shall be construed as a recommendation to infringe on any existing patents covering any material or its use.


AquaMatte 26HD Oxidized Polyethylene 105-111 1.07 6.0-8.5 26.00 2.0-5.0%AquaMatte 31 Oxidized Polyethylene 135-140 0.99 8.0-12.0 31.00 2.0-5.0%AquaPoly 250 Modified Polyethylene 114-123 0.98 8.0-10.0 31.00 0.5-2.0%AquaPolyfluo 411 Modified Polyethylene/PTFE 117-123 1.10 7.0-9.0 22.00 0.5-1.5%AquaTex Series Oxidized Polyethylene 135-140 0.99 wide range available 5.0-10.0%Fluo 300 PTFE >316 2.20 5.5-6.5 22.00 0.5-2.0%Fluo 300XF PTFE >316 2.20 2.0-4.0 15.56 0.5-2.0%Fluo HT PTFE >316 2.20 2.0-4.0 12.00 0.5-1.0%Fluo HTI-2 PTFE >316 2.20 3.0-5.0 15.56 0.5-1.0%Fluo X-1406 PTFE >328 2.20 4.0-6.0 22.00 0.5-2.0%MicroKlear 116 Polyethylene/Carnauba 120-125 0.97 4.5-5.5 15.56 1.0-3.0%MicroKlear 295 Polyethylene/Carnauba 119-124 0.97 4.0-6.0 22.00 1.0-3.0%MicroKlear 709 Polyethylene/PTFE/Carnauba 119-124 1.10 4.0-6.0 22.00 0.5-2.5%MicroMatte 1011 UVW Modified Polypropylene 146-149 0.94 6.0-9.0 22.00 1.0-5.0%MicroMatte 1213 UVW Modified Polypropylene 146-149 0.94 6.0-9.0 22.00 1.0-5.0%Micropro 400 Modified Polypropylene 140-143 0.93 5.0-7.0 22.00 0.5-5.0%Micropro 600 Modified Polypropylene 146-149 0.93 7.0-9.0 22.00 1.0-5.0%Micropro 700 Modified Polypropylene/PTFE 149-154 1.04 5.0-7.0 22.00 0.5-4.0%MicroTouch Series Polyurethane N/A 1.05 wide range available 4.0-8.0%MPP-615VF Polyethylene 114-116 0.95 6.0-8.0 22.00 1.0-3.0%MPP-620VF Polyethylene 114-116 0.95 5.0-7.0 22.00 1.0-3.0%MPP-645VF Polyethylene 123-125 0.96 7.0-9.0 22.00 1.0-3.0%MPP-1241 Polyethylene 123-125 0.96 20.0-25.0 110.00 1.0-3.0%NyloFine 1000 Aromatic Polyamide >279 1.19 6.0-10.0 31.00 1-0-2.0%NyloTex Series Polyamide 218-224 1.14 wide range available 4.0-6.0%Polyfluo 150 Polyethylene/PTFE 113-116 1.15 4.0-6.0 15.56 1.0-3.0%Polyfluo 190 Polyethylene/PTFE 121-132 0.99 10.0-12.0 31.00 1.0-3.0%Polyfluo 523XF Polyethylene/PTFE 113-117 1.26 3.5-5.5 15.56 0.5-3.0%Polyfluo 535 Polyethylene/PTFE 108-115 1.02 5.0-6.0 22.00 1.0-3.0%Polysilk 14 Polyethylene/PTFE 96-118 1.04 8.0-10.0 31.00 1.0-3.0%Propylfluo 824 Polypropylene/PTFE 150-160 1.04 5.0-7.0 22.00 0.5-4.0%PropylMatte 31 Polypropylene 160-170 0.86 8.0-12.0 31.00 2.0-5.0%PropylMatte 31HD Polypropylene 160-170 1.11 8.0-12.0 31.00 1.0-5.0%PropylTex Series Polypropylene 160-170 0.86-0.90 wide range available 3.0-10.0%SuperGlide 904 Amide 138-145 0.97 4.0-6.0 22.00 4.0-7.0%Synfluo 172VF Synthetic/PTFE 104-110 1.01 4.0-7.0 22.00 0.2-2.0%Synfluo 178VF Synthetic/PTFE 104-110 1.03 5.0-7.0 22.00 0.2-2.0%

2392_MP_2-IC0414_Brochure_R1_Layout 1 3/11/14 2:56 PM Page 1

AquaPoly 250Improved abrasion resistance and easy incorporation inwaterborne topcoats for steel substrates.

MPP-615VF/MPP-620VF Abrasion resistance and improved hardness in solvent-borne industrial coatings.

MPP-645VF/MPP-1241 Excellent abrasion resistance in heavy duty solventbased coatings. Good resistance to aromatic solvents.

Synfluo 172VF/Synfluo 178VF Cost-effective modified PTFE for improved surfacelubricity and abrasion resistance.

Polyfluo® 190Superior scratch resistance and abrasion resistance inmetal and plastic coatings. Used in interior/exteriorautomotive coatings.

Polyfluo® 150 /Polyfluo® 523XF/Polyfluo 535High performance modified PTFE wax additives foroptimum lubricity with scratch and abrasion resistancein metal and plastic coatings.

NyloFine 1000Ultrafine aromatic polyamide for maximum tempera-ture and chemical resistance with superior abrasion andscratch resistance. Excellent matting agent for thin filmhigh temperature baking systems.

MicroKlear 116/MicroKlear 295 /MicroKlear 709Provides slip and anti-blocking properties with excellentgloss retention and clarity in waterborne and solvent-borne finishes. Excellent for can coatings.

AquaPolyfluo 411For improved slip, scratch and abrasion resistance inhigh performance waterborne systems.

Fluo Grades(FLUO 300 / FLUO 300XF / FLUO HT / FLUO HTI-2)Provides heat resistance and lubricity in metal coatings.

Fluo X-1406Aggregated submicron PTFE spheres that can be highenergy dispersed into discrete particles for maximumlubricity and abrasion, especially in thin film applications.

PropylTex SeriesThe PropylTex Series is a full range of unique polypropylenetexture additives. The low density and high solvent resistanceof PropylTex products will reduce or eliminate settling andprovide optimum performance in aromatic systems. Particlesize is carefully controlled to ensure batch-to-batch uniformitywith special narrow cuts of select PropylTex grades availablefor the most demanding texture applications. PropylTexwaxes are particularly effective in texture coatings for general industrial, automotive and plastic applications.

AquaTex SeriesThe AquaTex waxes are micronized high density polyolefinsthat provide a unique texture effect. AquaTex waxes aredesigned to reduce or eliminate floating to provide opti-mum performance in waterborne systems. Available in sizesranging from 100 - 325 mesh.

NyloTex SeriesThe NyloTex products are micronized polyamides that are excellent for wear and abrasion resistance. NyloTexgrades exhibit a higher melt point than standard polyolefinsmaking them suitable for higher temperature applications.NyloTex powders will ensure a consistent texture even athigh baking temperatures.

*SEE RECOMMENDED ADDITION LEVELS ON BACK COVER *SEE RECOMMENDED ADDITION LEVELS ON BACK COVER

Matting & Gloss Control MPI offers a full line of unique waxes designed to provide consistent matting and gloss control properties. They exhibit excellent anti-blocking properties while improving metal marking resistance. These additives will not settle or affect the rheological properties of the coating. They are also used as a silica replacement with minimal viscosity increase at higher loadings.

Micropro 400 /Micropro 600Consistant gloss control with surface slip and abrasion resistance in metal and plastic coatings.

PropylMatte 31/PropylMatte 31HDOptimum gloss reduction without burnishing. Ideal for a wide variety of solventborne or waterborne coatings.

AquaMatte 31/AquaMatte 26HDProvides effective gloss control and a smooth surface finish with superior in-can stability.

MicroMatte® 1011 UVW/MicroMatte® 1213 UVWEfficient gloss control plus abrasion resistance for metal and plastic coatings, while still maintaining clarity. Also used as a silica replacement with minimal viscosity increase at higher loadings.

Propylfluo 824 /Micropro 700Polypropylene/PTFE combination wax provides superior gloss control, along with surface slip (lower COF) and abrasion resistance.

TextureThe MPI products listed below represent a broad selection of polymer types. A full range ofparticle sizes are available to help achieve the desired texture effect.

Soft Touch

MicroTouch SeriesBased on polyurethane technology, MicroTouch particles pro-vide soft touch surface effects that range from satiny smoothto leathery to rubbery. MicroTouch products give a matteappearance and provide superior scratch, burnish, and marresistance to your coating.

At Micro Powders, Inc. we pride ourselves in developing unique micronized waxes to help the formulator produce superior technical products. The grades listed below will assist you in selecting the most appropriate Micro Powders®

wax additive, which will provide a variety of enhancements to various types of industrial coatings for metals and plastics.The recommended addition levels* and some of the key performance benefits of selected products are included in thisbrochure. The typical method of incorporation is to add the micronized wax to the formula in the mixing or let-downstage. A predispersion of wax may also be produced to allow for easy addition to any portion of the formula.

Abrasion Resistance & Lubricity

Industrial Coatings

Wax additives are often the first line of defense against abrasionof the coating. They have also been proven extremely effectiveat providing increased lubricity to waterborne, solventborne andhigh-solids industrial coatings.

*SEE RECOMMENDED ADDITION LEVELS ON BACK COVER

MPI offers several product lines optimized for various Soft Touch applications. These productsprovide top of the line results in high end applications where superior feel is critical. Various softtouch effects can be achieved based on product selection in combination with different resinsystems.

Polysilk 14Formulated with softer wax polymers to provide a smoothfeel and optimum lubricity. Also imparts surface slip andrelease properties.

SuperGlide 904Modified amide wax for scratch and mar resistance along with a silky surface feel. Can be combined 1:1 with AquaTex325 or PropylTex 325S for a unique soft touch effect.


Industrial Coatings

Product Highlights

Industrial Coatings

About Micro PowdersMicro Powders, Inc. has been developing and manufacturing innovative specialtymicronized waxes, wax dispersions and emulsions since 1971 and now proudly offersmore than 150 unique and state-of-the-art products. Specifically created for the paint,printing ink and coatings markets, these wax additives help formulators developimproved and advanced surface coatings.




MPI Quality Program Certified to ISO 9001 2-IC0414

The information contained herein is to the best of our knowledge true and correct and any suggestions are made without guarantee, express or implied, since conditions of useare beyond our control. Micro Powders, Inc. disclaims any liability incurred in connection with the use of any data or suggestions. Nothing contained herein shall be construed as a recommendation to infringe on any existing patents covering any material or its use.


AquaMatte 26HD Oxidized Polyethylene 105-111 1.07 6.0-8.5 26.00 2.0-5.0%AquaMatte 31 Oxidized Polyethylene 135-140 0.99 8.0-12.0 31.00 2.0-5.0%AquaPoly 250 Modified Polyethylene 114-123 0.98 8.0-10.0 31.00 0.5-2.0%AquaPolyfluo 411 Modified Polyethylene/PTFE 117-123 1.10 7.0-9.0 22.00 0.5-1.5%AquaTex Series Oxidized Polyethylene 135-140 0.99 wide range available 5.0-10.0%Fluo 300 PTFE >316 2.20 5.5-6.5 22.00 0.5-2.0%Fluo 300XF PTFE >316 2.20 2.0-4.0 15.56 0.5-2.0%Fluo HT PTFE >316 2.20 2.0-4.0 12.00 0.5-1.0%Fluo HTI-2 PTFE >316 2.20 3.0-5.0 15.56 0.5-1.0%Fluo X-1406 PTFE >328 2.20 4.0-6.0 22.00 0.5-2.0%MicroKlear 116 Polyethylene/Carnauba 120-125 0.97 4.5-5.5 15.56 1.0-3.0%MicroKlear 295 Polyethylene/Carnauba 119-124 0.97 4.0-6.0 22.00 1.0-3.0%MicroKlear 709 Polyethylene/PTFE/Carnauba 119-124 1.10 4.0-6.0 22.00 0.5-2.5%MicroMatte 1011 UVW Modified Polypropylene 146-149 0.94 6.0-9.0 22.00 1.0-5.0%MicroMatte 1213 UVW Modified Polypropylene 146-149 0.94 6.0-9.0 22.00 1.0-5.0%Micropro 400 Modified Polypropylene 140-143 0.93 5.0-7.0 22.00 0.5-5.0%Micropro 600 Modified Polypropylene 146-149 0.93 7.0-9.0 22.00 1.0-5.0%Micropro 700 Modified Polypropylene/PTFE 149-154 1.04 5.0-7.0 22.00 0.5-4.0%MicroTouch Series Polyurethane N/A 1.05 wide range available 4.0-8.0%MPP-615VF Polyethylene 114-116 0.95 6.0-8.0 22.00 1.0-3.0%MPP-620VF Polyethylene 114-116 0.95 5.0-7.0 22.00 1.0-3.0%MPP-645VF Polyethylene 123-125 0.96 7.0-9.0 22.00 1.0-3.0%MPP-1241 Polyethylene 123-125 0.96 20.0-25.0 110.00 1.0-3.0%NyloFine 1000 Aromatic Polyamide >279 1.19 6.0-10.0 31.00 1-0-2.0%NyloTex Series Polyamide 218-224 1.14 wide range available 4.0-6.0%Polyfluo 150 Polyethylene/PTFE 113-116 1.15 4.0-6.0 15.56 1.0-3.0%Polyfluo 190 Polyethylene/PTFE 121-132 0.99 10.0-12.0 31.00 1.0-3.0%Polyfluo 523XF Polyethylene/PTFE 113-117 1.26 3.5-5.5 15.56 0.5-3.0%Polyfluo 535 Polyethylene/PTFE 108-115 1.02 5.0-6.0 22.00 1.0-3.0%Polysilk 14 Polyethylene/PTFE 96-118 1.04 8.0-10.0 31.00 1.0-3.0%Propylfluo 824 Polypropylene/PTFE 150-160 1.04 5.0-7.0 22.00 0.5-4.0%PropylMatte 31 Polypropylene 160-170 0.86 8.0-12.0 31.00 2.0-5.0%PropylMatte 31HD Polypropylene 160-170 1.11 8.0-12.0 31.00 1.0-5.0%PropylTex Series Polypropylene 160-170 0.86-0.90 wide range available 3.0-10.0%SuperGlide 904 Amide 138-145 0.97 4.0-6.0 22.00 4.0-7.0%Synfluo 172VF Synthetic/PTFE 104-110 1.01 4.0-7.0 22.00 0.2-2.0%Synfluo 178VF Synthetic/PTFE 104-110 1.03 5.0-7.0 22.00 0.2-2.0%



Powder Coatings

MICRO POWDERS, INC.

26634_MPI_PowderCtg_26634 PowderCoatingsBroch 1/16/13 11:02 AM Page 2

Synfluo 178VF

Optimum scratch and slip proper-ties. Excellent for gloss retention.

Polyfluo® 523XF

Optimum scratch and abrasionresistance with surface lubricity forpigmented and clear powdercoatings. Excellent gloss retention.

Powder Coatings

Anti-Gassing

MP-26VF

Cost-effective synthetic wax for excellent anti-gassing properties.

MPP-230F

Economical and effective low molecular weight PE waxfor general anti-gassing of powder coatings.

MICROMIDE 520 & SYNSLIP 3750

Amide based waxes for use in coatings applied to diffi-cult substrates where more aggressive anti-gassing or de-gassing is needed. Galvanized metal, cast aluminumand MDF wood substrates are typical examples. Synslip3750 will generally provide more surface lubricity andmar resistance.

Abrasion Resistance With Lubricity

MPI offers a wide range of polymeric waxes that are combined with PTFE to give optimum levels of performance and efficiency.

Synfluo 168VF

Cost-effective, good slip andscratch resistance.

Synfluo 172VF

Provides excellent lubricity andscratch resistance properties.


MPP-620VF

A unique, finelymicronized polyethylene waxthat is widely used foranti-gassing. It can be incorporated in most resin systems for optimum properties. It offers the added benefit of improvedextrusion flow characteristics.

At Micro Powders, Inc. we pride ourselves in developing unique micronized waxes to help the formulator produce superior technical products. The grades listed below will assist you in selecting the most appropriate Micro Powders’ wax additive that will provide a variety of enhancements to powder coatings. The recommended addition levels* and some of the key performancebenefits of selected products are included in this brochure. The usual method of incorporation is to add the micronized waxes tothe pre-mix before melt extrusion. However, the micronized waxes may also be dry blended with the finished powder.

The properties of anti-gassing in a powder coating can be achieved with controlled molecular weight micronized waxes from MPI. The products listed below provide anti-gassing as well as abrasion resistance properties.


Matting & Gloss Control

Micropro 400

A high melt point modified polypropylene product whichcan be used to control gloss and improve the hardness ofpowder coatings.

MicroMatte® 2000

A finely micronized modified polypropylene, excellent for polyester powder coatings as well as UV cured systems.

PropylMatte 31

A micronized polypropy-lene that is manufacturedusing specialized equipmentto give a closely controlledparticle size distribution.PropylMatte 31 is idealfor most powder systems,including TGIC-free, where a gloss level of 25 @ 60° can bereached at 5% addition levels. Because of its non-porousnature, PropylMatte 31 is ideal for exterior applications.

Texture & Structure

Synfluo 283TX

A combination of synthetic andPTFE waxes which will give a uniform, low profile texture withgood abrasion and lubricity.

Fluo 625F-H

This highly controlled PTFE isdesigned to give a uniform high degree of texture with glosscontrol while imparting excellent heat resistance and lubricity.Coatings produced using this product are often overprinted.

Fluo 750TX

Unique, ultra high molecular weight PTFE grade for extra structure and matting at low addition levels.

Fluo HT

Specially refined PTFE grade for texture and gloss control in UV systems.

MicroTex 511

Designed as an economical and efficient alternative to the more expensive PTFE texturing products being used inpowder coatings. Offers the most cost-effective combinationof texture and gloss control with recoatability.

NyloTex 140 & 200

For structure and micro texture in low-temperature powders. Often used as a post-additive to finished powder.

Micro Powders offers a wide range of texturing waxes of various types to meet your technical requirements. These products are produced using advanced micronizing techniques that producehighly controlled particle size distributions. They are blended to ensure batch uniformity.


The unique waxes listed below have proven to be veryeffective for formulators trying to achieve matting andgloss control properties in powder coatings.

MPP-611

Narrow melt point rangepolyethylene wax for consistent performance.

MPP-615VF

Economical and cost-effective polyethylene wax for excel-lent hardness and block resistance.

Hardness & Block Resistance

MPP-620VF

Produced from a unique polyethylene polymer designed to give optimum hardness and block resistance properties atlow addition levels.

The use of micronized waxes from MPI listed below, uniformly dispersed in a powder coating,can provide optimum hardness and anti-blocking properties while maintaining gloss levels.


About Micro Powders

Product Highlights



Fluo HT PTFE >316 (soft. pt.) 2.2 2.0-4.0 12.0 2.5-5.0%

Fluo 625F-H PTFE >316 (soft. pt.) 2.2 13.0-21.0 44.0 1.0-4.0%

Fluo 750TX PTFE 325-350 (soft. pt.) 2.2 20.0-30.0 148.0 0.5-1.0%

MicroMatte® 2000 Polyproplylene 146-149 0.94 5.0-7.0 22.0 2.0-5.0%

Micromide 520 Amide 141-145 0.97 5.0-7.0 22.0 0.5-3.0%

Micropro 400 Polyproplylene 140-143 0.93 5.0-7.0 22.0 2.0-5.0%

MicroTex 511 PTFE >316 (soft. pt.) 2.2 20.0-25.0 124.0 2.0-5.0%

MP-26VF Synthetic 102-106 0.95 5.0-7.0 22.0 1.0-2.0%

MPP-230F Polyethylene 113-124 0.94 10.0-12.0 31.0 0.2-1.0%

MPP-611 Polyethylene 109-111 0.95 6.0-8.0 22.0 1.0-3.0%

MPP-615VF Polyethylene 114-116 0.95 6.0-8.0 22.0 0.5-1.0%


NyloTex 140 Polyamide 218-224 1.14 45.0-65.0 104.0 (140 mesh) 5.0-10.0%

NyloTex 200 Polyamide 218-224 1.14 30.0-50.0 74.0 (200 mesh) 5.0-10.0%

Polyfluo® 523XF Polyethylene/PTFE 113-117 1.26 2.5-5.5 15.56 0.5-1.0%

PropylMatte 31 Polyproplylene 160-170 0.86 8.0-12.0 31.0 2.0-5.0%




Synfluo 283TX Synthetic/PTFE 104-110 1.05 8.0-10.0 31.0 1.0-2.0%

Synslip 3750 Synthetic/Amide 250-265 0.95 5.0-7.0 22.0 0.5-3.0%


3PC0113MPI Quality Program Certified to ISO 9001

MICRO POWDERS, INC.

580 White Plains Road • Tarrytown • New York 10591TEL 914-793-4058 • FAX 914-472-7098 • EMAIL [email protected]


Micro Powders, Inc. has been developing and manufacturing innovative specialtymicronized waxes, wax dispersions and emulsions since 1971. Today we offermore than 150 state-of-the-art products specifically created for the paint, printingink and coatings markets. These sophisticated wax additives help formulatorsdevelop enhanced surface coatings.



Printing Inks

MICRO POWDERS, INC.

26843_MPI_10972_InkBrochure_R1_10475 Ink Brochure Final 3/5/13 6:36 PM Page 2

Printing Ink Applications

Offset Inks & Overprint Varnishes (OPV’s)


At Micro Powders, Inc. we pride ourselves in developing unique micronized waxes to help the ink formulator produce superior technical products. The grades listed below will assist in selecting the most appropriate Micro Powders’ wax additive that will pro-vide a variety of enhancements to various types of printing ink applications. Recommended addition levels* and some of the key performance benefits of selected products are included in this brochure. The typical method of incorporation is toadd the micronized wax to the formula in the mixing stage. Otherwise, a predispersion of wax may be produced to allow for easy addition to any portion of the formula.

MP-22XF

An economical synthetic wax for improved slip properties.

MPP-230VF/MPP-308VF

Cost-effective PE waxes for rub resistance.

MPP-615VF/MPP-620VF/MPP-620XF

High molecular weight PE waxes for optimum rub and slip in sheet fed and low temperature heat set inks. These waxes will not interfere with recoatability when UV topcoated.

MPP-645VF/MPP-645XF

Ultra high molecular weight PE waxes for good rub resistance, gloss retention and excellentrecoatability with OPV’s.

MicroMatte®

1011 UVW/1213 UVW

Finely micronized modified polypropylene waxes thatprovides uniform matting and gloss control with minimal effects on rheology.

Polyfluo® 150

Cost-effective PE/PTFE combinations for maximum rub and slip properties.

Polyfluo® 200

PE/PTFE combination with good recoatability in UV OPV’s. Ideal for IR inks.

Polyfluo® 535/Polyfluo® 540

Unique modified PTFE that imparts high slip propertiesin topcoats and OPV’s.

Polyfluo® 400XF/Polyfluo® 540XF

Unique modified PTFE waxes that allow a formula to meethigh slip requirements. These waxes perform well at lowlevels of addition and are easily dispersed for excellent performance in UV OPV applications.

Fluo HT/Fluo HTI-2

PTFE waxes that provide optimum heat resistance. Oftenused in combination with PE wax in heat set inks.

Fluo X-1406

Contains clusters of sub-micron particles which provide maximum lubricity in inks and coatings.


Flexographic & Gravure Printing Inks


Waterborne Flexo &

Gravure Inks

AquaBead® 525E

Unique emulsion of carnauba and paraffin waxes forimproved MVTR.

Aquawax 214/Aquawax 214VF

Oxidized synthetic waxes for carton inks. Higher melt pointand improved rub resistance.

AquaPoly 215

Cost-effective oxidized PE wax with excellent rub resistancein carton and paper inks.

AquaPoly 250

High performance PE wax for optimum rub resistance with no foaming. Excellent suspension stability in flexo cartonand paper inks.

Polyfluo® 190

PE/PTFE combination wax provides excellent wet rub resistance with gloss retention. Ideal for lacquers and milkcarton inks.

AquaMatte® 31/AquaMatte® 22

Finely micronized oxidized polyolefins that are especiallyuseful in water reducible energy curable systems where atough, clear, low gloss finish is desired.

AquaPolyfluo 411

Modified PE/PTFE combination that provides optimum slip, heat resistanceand rub resistance. Ideal for preprint,EPIC and OPV gloss applications.Provides excellent rub resistance toflexo and gravure paper inks.

AquaPolysilk 19/

Polysilk 14

Unique combinations of PE/PTFE for optimum slip, rub resistance and tape release on plastic film, aluminum foiland OPV applications. Excellent heat seal resistance.

PropylMatte 31

Polypropylene wax for non-slip inks and OPV’s. Ideal for gloss control in flexo inks on multiwall bags, paperand plastic.

Microspersion® 504E

Large particle size PE emulsion for waterborne flexo and OPV’s.

Microspersion® 930

Combination PE emulsion and micronized wax dispersion that provides COF reduction, rub resistance with gloss retention and clarity in high gloss OPV’s.

Solventborne Flexo &

Gravure Inks

MP-22/MP-22XF

Low cost synthetic wax for slip and rub resistance.

MPP-230F/MPP-230VF

Economical PE waxes for gravure and flexo applications.

MPP-611

Tough, hard PE wax for rub and scratch resistance in packaging inks.

MPP-620VF/MPP-645VF

High molecular weight PE waxes for optimum rub resistanceand increased slip in packaging inks.

Polyfluo® 150

PE/PTFE combination ideal for good slip and abrasion resistance in packaging gravure inks and topcoats.

Polyfluo® 190

Combination of PE/PTFE for excellent rub and slip with good gloss retention at low levels of addition in filmpackaging inks.

Polyfluo® 200

Solvent resistant PE/PTFEwax for slip, scratch and heat resistance inpackaging inks.

Polyfluo® 523XF

High molecular weight PE/PTFE wax for superior rub andscratch resistance in high gloss inks and lacquers.

Polysilk 14/Polysilk 600

Unique combinations of waxes that provide slip and tape release in paper, film and foil inks and coatings.Excellent blocking resistance in heat seal applications.

PropylMatte 31

Polypropylene wax for good anti-blocking and non-slip properties. Effective matting agent.

MicroKlear 116/MicroKlear 295

PE/carnauba combinations for excellent lubricity, gloss andfilm clarity. Especially suited for topcoats and OPV’s.


Product Highlights


AquaBead® 525E Carnauba/Paraffin n/a 0.94 n/a n/a 2.0-10.0%

AquaMatte® 22 Oxidized PE 135-140 0.99 6.0-8.0 22.0 2.0-5.0%

AquaMatte® 31 Oxidized PE 135-140 0.99 8.0-12.0 31.0 2.0-5.0%

AquaPoly 215 Oxidized PE 105-111 0.95 9.0-11.0 31.0 1.0-2.0%

AquaPoly 250 Modified PE 117-123 0.98 8.0-10.0 31.0 1.0-2.0%

AquaPolyfluo 411 Modified PE/PTFE 117-123 1.10 6.0-8.0 22.0 0.5-1.0%

AquaPolysilk 19 Modified PE/PTFE 102-118 1.06 9.0-11.0 31.0 0.5-1.0%

Aquawax 214 Oxidized Synthetic 104-107 0.96 9.0-11.0 31.0 1.0-2.0%

Aquawax 214VF Oxidized Synthetic 104-107 0.96 5.0-7.5 22.0 1.0-2.0%

Fluo HT PTFE >316 2.20 2.0-4.0 12.0 0.5-1.0%

Fluo HTI-2 PTFE >316 2.20 3.0-5.0 15.56 0.5-1.0%

Fluo X-1406 PTFE >316 2.20 4.0-6.0 22.0 0.5-1.0%

MicroKlear 116 PE/Carnauba 107-113 0.97 4.0-5.0 15.56 0.5-2.0%

MicroKlear 295 PE/Carnauba 104-110 0.97 4.0-6.0 22.0 0.5-2.0%

MicroMatte® 1011 UVW Modified Polypropylene 150-156 1.07 5.0-7.5 22.0 1.0-5.0%


Microspersion® 504E PE Emulsion Liquid 1.00 n/a n/a 2.0-5.0%

Microspersion® 930 PE Dispersion Liquid 0.98 n/a n/a 1.0-3.0%

MP-22 Synthetic 102-106 0.94 7.0-10.0 22.0 0.8-3.0%

MP-22XF Synthetic 102-106 0.94 4.5-6.5 22.0 0.8-3.0%

MPP-230F Polyethylene 113-124 0.94 10.0-12.0 31.0 1.0-2.5%



MPP-611 Polyethylene 109-111 0.95 5.0-8.0 22.0 1.0-2.0%



MPP-620XF Polyethylene 114-116 0.95 4.5-5.5 22.0 1.0-2.0%


MPP-645XF Polyethylene 123-125 0.96 4.0-6.0 22.0 1.0-2.0%

Polyfluo® 150 PE/PTFE 113-116 1.15 3.5-5.5 15.56 0.4-1.0%

Polyfluo® 190 PE/PTFE 121-132 0.99 9.0-12.0 31.0 0.4-0.8%

Polyfluo® 200 PE/PTFE 124-126 1.10 9.0-11.0 31.0 0.2-0.8%

Polyfluo® 400XF Modified PTFE 108-115 1.35 3.0-5.0 11.0 0.5-1.0%

Polyfluo® 523XF PE/PTFE 113-117 1.26 3.5-5.5 15.56 0.3-0.8%

Polyfluo® 535 Modified PTFE 108-115 1.02 5.0-6.0 22.0 0.2-0.5%

Polyfluo® 540 Modified PTFE 108-115 1.02 5.0-6.0 22.0 0.2-0.5%

Polyfluo® 540XF Modified PTFE 108-115 1.02 3.0-5.5 11.0 0.5-1.0%

Polysilk 14 PE/PTFE 96-118 1.04 7.5-9.5 31.0 0.5-1.0%

Polysilk 600 PE/PTFE/Amide 96-109 1.08 5.0-7.0 22.0 0.5-1.5%



MICRO POWDERS, INC.


3INK0313





UV/EB INKS & Coatings

MICRO POWDERS, INC.

26843_MPI_10309_UV-EB_Brochure_R1_10309 UV/EB Broch final 3/5/13 6:33 PM Page 2

MicroKlear

116/295

Combinations of polyethylene and carnaubawax which impart slip while maintaining clarity in UV cationic can-end and container coatings.

Propyltex Series

The PropylTex series is a fullrange of unique polypropylene texture additives. They areideal for furniture or cabinet coatings. Particle size is carefullycontrolled to ensure batch-to-batch uniformity. Special narrowcuts of select PropylTex grades are available for the mostdemanding texture applications.

UV/EB INKS & Coatings

Slip, Rub Resistance & Anti-Blocking

MPP-615XF/MPP-620XF/MPP-620XXF

Micronized polyethylene waxes for optimum rub resistanceand slip properties for UV printing inks and coatings.

Polyfluo 150/Polyfluo 190 /

Polyfluo 523XF/olyfluo 540

PE/PTFE combination waxes which provide excellent slip andfilm toughness in inks, coatings and OPV’s.

Texture


Aquatex Series

The AquaTex series is a complete range of micronized oxidized polyolefin additives. A wide variety of particle sizesare available to achieve a multitude of texturing effects inspecialty coatings.

At Micro Powders, Inc. we pride ourselves in developing unique micronized waxes to help the formulator produce superior technical products. The grades listed below will assist you in selecting the most appropriate Micro Powders’ wax additive which willprovide a variety of enhancements to various types of UV coatings and inks. The recommended addition levels* and some of the key performance benefits of selected products are included in this brochure. The typical method of incorporation is toadd the micronized wax to the formula in the let-down stage. Otherwise a predispersion of wax may also be produced to allow easy addition to any portion of the formula. To obtain optimum results when formulating matte and textured UV coatings, it is advisable to choose a photoinitiator combination that cures from the bottom up.

The following products provide optimum slip, rub resistance and anti-blocking properties toUV coatings and inks.

In today’s marketplace, many different surface appearances are required of finishes applied to wood and composite substrates. The MPI products listed below represent a broad selection ofpolymers and particle sizes to achieve texture. Specialty effects are also possible with pigmented products.

Mar Resistance & Hardness

The products listed below are characterized by their high degree of hardness and mar resistance properties.

MPP-123

High molecular weight, low density PE wax with a highdegree of hardness and minimal slip.

Micropro 400 /Micropro 600

Modified polypropylene waxes that are extremely hard andprovide excellent mar resistance properties.

Polyfluo 190

Unique combination of high molecular weight polyethyleneand PTFE that provides abrasion and heel-mark resistance toUV floor coatings.

Micromatte® 2000

Improved mar and scuff resistance with clarity in UV varnishes.


Polyfluo 540XF/Polyfluo 400XF

Unique mixture of polyethylene and PTFE. Provides highestdegree of lubricity and scratch resistance while maintaininggloss levels and clarity.

Synfluo 172XF/Synfluo 178XF

Synfluo 180XF

Combinations of high molecular weight synthetic waxes andPTFE. Imparts excellent surface lubricity and scratch resistance.The extra-fine particle size of these products allows them tomaintain the gloss in high-gloss systems.

Polyfluo 523XF

Combination of high melt point polyethylene and PTFEuniquely suited for metal substrates. Excellent mobility andscratch resistance in high gloss, clear, can coating systems.

Gloss Control & Matting

MicroMatte® 2000

PropylMatte 31

MicroMatte®1213UVW/MicroMatte®1011UVW

Finely micronized modified polypropylene waxes that provide uniform matting and gloss control. These productshave minimal effects on rheology of UV coatings whilemaintaining excellent clarity and haze reduction.

AquaMatte® 31/AquaMatte® 22

Finely micronized oxidized polyolefins that are especiallyuseful in water reducible energy curable systems where atough, clear, low gloss finish is desired.

Micropro 440W

Modified polypropylene wax. Provides smooth surface andgloss control in water based UV coatings.

Propylfluo 824

Unique PP/PTFE combination wax for matting and gloss con-trol, surface lubricity and abrasion resistance. This product willhave minimal effect on UV systems rheology.

Soft Feel & Tape Release

Polysilk 14

Formulated with softer waxpolymers to provide a smooth feel and

optimum lubricity. This product will also provide optimumtape release properties while reducing or eliminating theneed for silicones.

Superglide 904

Amide waxes combined with polyolefins providing excellentclarity and gloss retention in energy cured systems. Verysmooth and scratch resistant surfaces can be achieved.

Superslip 6515XF/Superslip 6530

Combination of PE and amide wax that provides excellent “hand feel” and lubricity as well as slip and scratchresistance properties.


Scratch Resistance & Lubricity

MP-22XF

Economical synthetic waxwhich improves slip and surface “feel.”

Superslip 6515XF

Combination of polyethylene and amide wax. Excellent“hand feel” and lubricity in UV wood finishes.

Fluo HT/Fluo HTI-2

PTFE for UV can coatings and UV powder coatings. Verygood mobility and heat resistance.

Low gloss and satin finishes often reflect high quality in a wood coating. MPI offers a full line of unique waxes designed to be used as gloss control agents with minimaleffects on rheology. They can be used with or without silica. When used in conjunctionwith silicas, the waxes will help to keep silicas suspended in coatings.

The products listed below will impart an excellent “feel” or smoothness and tape release to UV coatings.

The following products are effective additives for providing scratch resistance and lubricity.


Product Highlights


AquaMatte® 22 Oxidized PE 135-140 0.99 6.0-8.0 22.0 2.0-5.0%AquaMatte® 31 Polyolefin 135-140 0.99 8.0-12.0 31.0 2.0-5.0%AquaTex Series Oxidized Polyethylene 135-140 0.99 Wide range available 5.0-10.0%Fluo HT PTFE >316 2.20 2.4-4.0 12.0 0.3-1.0%Fluo HTI-2 PTFE >316 2.20 3.0-5.0 15.56 0.3-1.0%MicroKlear 116 PE/Carnauba 107-113 0.97 4.0-5.0 15.56 0.2-0.5%MicroKlear 295 PE/Carnauba 104-110 0.97 4.0-6.0 22.0 0.2-0.5%MicroMatte® 1011 UVW Polypropylene 150-156 1.07 5.0-7.5 22.0 2.0-4.0%MicroMatte® 1213UVW Modified Polypropylene 150-156 1.11 5.0-7.5 22.0 2.5-5.0%MicroMatte® 2000 Modified Polypropylene 146-149 0.94 6.0-9.0 22.0 2.5-5.0%Micropro 400 Modified Polypropylene 140-143 0.93 4.5-7.5 22.0 3.0-6.0%Micropro 440W Modified Polypropylene 150-156 0.94 5.0-7.5 22.0 2.0-6.0%Micropro 600 Modified Polypropylene 146-149 0.93 6.0-9.0 22.0 3.0-6.0%MP-22XF Synthetic 102-106 0.94 4.5-6.5 22.0 1.0-2.0%MPP-123 Polyethylene 110-113 0.92 10.0-12.0 31.0 0.5-1.5%MPP-615XF Polyethylene 114-116 0.95 4.5-5.5 31.0 0.2-0.5%MPP-620XF Polyethylene 114-116 0.95 4.5-5.5 22.0 0.2-0.5%MPP-620XXF Polyethylene 114-116 0.95 4.25-4.75 15.56 0.2-0.5%Polyfluo® 150 PE/PTFE 113-116 1.15 3.5-5.5 15.56 0.5-1.0%Polyfluo® 190 PE/PTFE 121-132 0.99 9.0-12.0 31.0 0.5-1.0%Polyfluo® 400XF PE/PTFE 108-115 1.35 3.0-5.0 11.0 0.2-0.5%Polyfluo® 523XF PE/PTFE 113-117 1. 26 3.5-5.5 15.56 0.5-3.0%Polyfluo® 540 PE/PTFE 108-115 1.02 5.0-6.0 22.0 0.5-1.0%Polyfluo® 540XF PE/PTFE 108-115 1.02 3.0-5.5 11.0 0.5-1.0%Polysilk 14 PE/PTFE 96-118 1.04 7.5-9.5 31.0 0.5-1.0%Propyfluo 824 PP/PTFE 150-160 1.04 5.0-7.0 22.0 0.5-4.0%PropylMatte 31 Polypropylene 160-170 0.89 8.0-12.0 31.0 2.5-5.0%PropylTex Series Polypropylene 160-170 0.86 Wide range available 5.0-10.0%SuperGlide 904 PE/Amide 138-145 0.97 4.0-7.0 22.0 0.5-3.0%Superslip 6515XF PE/Amide 124-137 0.95 4.0-6.0 15.56 1.0-2.0%Superslip 6530 PE/Amide 124-135 0.95 6.0-7.5 22.0 1.0-2.0%Synfluo 172XF Synthetic/PTFE 104-110 1.01 3.5-6.0 18.50 0.1-0.3%Synfluo 178XF Synthetic/PTFE 104-110 1.03 3.0-5.0 11.0 0.1-0.3%Synfluo 180XF Synthetic/PTFE 104-110 1.10 3.0-5.0 11.0 0.1-0.3%

*Laser diffraction analysis. **Based on total formula weight.The information contained herein is to the best of our knowledge true and correct and any suggestions are made without guarantee, express or implied, since conditions of use arebeyond our control. Micro Powders, Inc. disclaims any liability incurred in connection with the use of any data or suggestions. Nothing contained herein shall be construed as a recom-mendation to infringe on any existing patents covering any material or its use.

MICRO POWDERS, INC.


3UVEB0313MPI Quality Program Certified to ISO 9001

About Micro Powders

Micro Powders, Inc. has been developing and manufacturing innovative speciality micronized waxes, wax dispersions and emulsions since 1971. Today we offer more than 150 state-of-the-art products specifically created for the paint, printing ink and coatings markets. These sophisticated wax additives helpformulators develop enhanced surface coatings.



Wood Coatings

MICRO POWDERS, INC.

2393_MP_2-WC0414_Brochure_10165 Wood BrochureFinal 3/7/14 3:31 PM Page 2

Synfluo172VF/178VFFor slip, scratch and mar resistancewith excellent gloss retention in furniture coatings.

AquaPolyfluo 411For use in water based door and window frame coatings.

Micropro 400 /500 For scratch and mar resistance in satin and matte finishes.Can replace or reduce sedimentation of silica additives.

NyloFine 1000Unique ultrafine aromatic polyamide for superiorabrasion, scratch, and chemical resistance with a softsurface feel.

AquaSuperslip 6550For smooth feel and gloss control with slip in waterbornepolyurethane and acrylic systems.

Aquawax 214VF & AquaPoly 215VFFor scratch resistance and smooth surface feel in waterborne clear varnishes.

Micropro 440WGloss control and lubricity for low gloss waterborne varnishes and topcoats.

Micropro 700PTFE modified polypropylene for smooth feel and slip in satinacrylic and polyurethane finishes.

Wood Coatings

Scratch & Mar Resistance

MPP-615VF/MPP-620VFMicronized polyethylene waxes for optimum mar resistance.

Superslip 6515For scratch resistance in matte and satin UV coatings for furniture.

MP-22VFEconomical synthetic wax for general surface slip and scratchprotection in wood varnishes.

AquaPoly 215 & Aquawax 214For scratch and mar resistance as well as anti-block in waterborne wood coatings.

Lubricity & Smooth Feel


MP-22VF/MP-22XFEconomical synthetic waxes which improve slip and surface“feel” in wood finish applications.

Polyfluo® 535 /540Excellent for use in high gloss clear lacquers. Will also provide heat resistance.

SuperGlide 904Excellent lubricity, surface smoothness and blocking resist-ance without PTFE.

Superslip 6515/6525/6530Provides a smooth surface with good “hand” in satin woodand furniture coatings.

Synfluo 172XF/178XF/180XFExcellent slip and gloss retention in furniture lacquers.

At Micro Powders, Inc. we pride ourselves in developing unique micronized waxes to help the formulator produce superior

technical products. The grades listed below will assist you in selecting the most appropriate Micro Powders’ wax additive that will

provide a variety of enhancements to wood finishes, topcoats and stains. The recommended addition levels* and some of the

key performance benefits of selected products are included in this brochure. The typical method of incorporation is to add the

micronized wax to the formula in the let-down stage. Otherwise, a pre-dispersion of wax may also be produced.

Wax additives are often the first line of defense against scratch and mar on the surface of wood coatings. These micronized waxes from MPI offer the best combinations of tough, high molecularweight waxes as well as PTFE modified waxes for optimum scratch and abrasion resistance.

The MPI waxes listed below have proven to be extremely effective when seeking hardness,smooth feel and lubricity in waterborne, solvent or high solids wood coatings as well as clearlacquers for wood substrates.


AquaBead® 519 /916Unique additives to impartwater repellency to all types ofwood finishes and stains.

AquaBead® 270E/525EFor water repellency in waterborne paints and coatings.

Texture

PropylTex SeriesThe PropylTex series is a full range ofunique polypropylene texture additives.They are ideal for furniture or cabinet coatings. Particle size is carefully controlledto ensure batch-to-batch uniformity withspecial narrow cuts of select PropylTexgrades available for the most demanding texture applications.

NyloTex SeriesThe NyloTex Series is a range ofmicronized polyamide textureadditives that impart maximumwear and abrasion resistancealong with gloss reduction.

Matting & Gloss Control

Micropro 200Micropro 400Micropro 500For use in acrylic and

polyurethane matte and satin systems. The Micropro waxes will provide burnish resistance, will not settle or affectrheology. They can be used with or without silica. Whenused in conjunction with silica the Micropro waxes will keepsilicas suspended.

Micropro 440WFormulated to provide excellent gloss control and lubricity in waterborne polyurethane systems. Also works well in UV systems.

MicroMatte® 2000MicroMatte® 1011 UVW/1213 UVWEfficient gloss control for UV and waterborne satin finisheswith excellent clarity. Formulated to provide optimum application viscosity and scratch resistance.

PropylMatte 31/PropylMatte 31HDOptimum gloss control and abrasion resistance in UV andconventional topcoats where silicas cannot be used.

AquaMatte 31/22 /26HDRecommended for superior in-can stability and ease ofincorporation in waterborne systems. Efficient gloss reductionwith a smooth surface feel.


Water Repellency & Beading

MP-22XFFor exterior wood stains to increase the longevity of water “beading.”

Micropro 400For excellent long lasting weather resistance that will alsoreduce chalking.

In today’s marketplace, many different surface appearances are required of finishes applied to wood and composite substrates. The MPI products listed below represent a broad selection of polymers and particle sizes to achieve texture.

Low gloss and satin finishes often convey high quality in a wood coating. MPI offers a full line of unique waxes designed to achieve high performance in demanding formulations whilemaintaining recoatability.

Exterior coatings are often required to provide water beading for both protective and aesthetic reasons. MPI micronized waxes can provide these properties while increasing weather resistanceand durability of the coatings or stains.

AquaTex SeriesThe AquaTex waxes are micronized high-densitypolyolefins that provide a unique texture effect.AquaTex waxes are designed to reduce or elimi-nate floating to provide optimum performance inwaterborne systems. AquaTex will also impart asmoother “feel” than other types of texturizing agents due to its rounded, almost spherical shape. A full series of particle size ranges are available.


About Micro PowdersMicro Powders, Inc. has been developing and manufacturing innovative specialty micronized waxes, wax dispersions and emulsions since 1971. Today we offer more than 150state-of-the-art products specifically created for the paint, printing ink and coatings markets.These sophisticated wax additives help formulators develop enhanced surface coatings.

Product Highlights

MICRO POWDERS, INC.580 White Plains Road • Tarrytown • New York 10591

TEL 914-793-4058 • FAX 914-472-7098 • EMAIL [email protected]

www.micropowders.com2-WC0414

The information contained herein is to the best of our knowledge true and correct and any suggestions are made without guarantee, express or implied, since conditions of use are

beyond our control. Micro Powders, Inc. disclaims any liability incurred in connection with the use of any data or suggestions. Nothing contained herein shall be construed as a recom-

mendation to infringe on any existing patents covering any material or its use.

Product Wax Type(s) Melt Point (°C) Density *Mean Particle *MaximumParticle **Recommended(g/cc@25°C) Size (microns) Size (microns) Addition Levels

AquaBead 270E PE Emulsion N/A 0.96 N/A N/A 3.0-10.0%AquaBead 519 Combination 140-145 0.91 6.0-8.0 22.0 1.0-4.0%AquaBead 525E Carnauba/Paraffin N/A 0.94 N/A N/A 2.0-10.0%AquaBead 916 Combination 128-134 0.93 7.0-9.0 22.0 1.0-3 .0%AquaMatte 22 Oxidized Polyethylene 135-140 0.99 6.0-8.0 22.0 2.0-5.0%AquaMatte 26HD Modified Polyolefin 105-111 1.07 6.0-8.5 26.0 2.0-5.0%AquaMatte 31 Oxidized Polyethylene 135-140 0.99 8.0-12.0 31.0 2.0-5.0%AquaPoly 215 Oxidized Polyethylene 105-111 0.95 9.0-11.0 31.0 0.5-2.0%AquaPoly 215VF Oxidized Polyethylene 105-111 0.95 5.0-7.5 22.0 0.5-2.0%AquaPolyfluo 411 Modified Polyethylene/PTFE 117-123 1.10 7.0-9.0 22.0 0.5-2.0%AquaSuperslip 6550 Modified Polyethylene/Amide 126-130 0.94 6.0-7.5 22.0 0.5-2.0%AquaTex Series Oxidized Polyethylene 125-158 1.19 wide range available 3.0-10.0%Aquawax 214 Oxidized Synthetic 104-107 0.96 9.0-11.0 31.0 0.5-1.5%Aquawax 214VF Oxidized Synthetic 104-107 0.96 5.0-7.5 22.0 0.5-2.0%MicroMatte® 1011UVW Modified Polypropylene 150-156 1.07 5.0-7.5 22.0 2.0-4.0%MicroMatte® 1213UVW Modified Polypropylene 150-156 1.11 5.0-7.5 22.0 2.0-4.0%MicroMatte® 2000 Modified Polypropylene 146-149 0.94 5.0-7.0 22.0 1.0-4.0%Micropro 200 Modified Polypropylene 140-143 0.95 8.0-11.0 31.0 2.0-4.0%Micropro 400 Modified Polypropylene 140-143 0.93 5.0-7.0 22.0 2.0-4.0%Micropro 440W Modified Polypropylene 150-156 0.94 9.0-11.0 31.0 2.0-5.0%Micropro 500 Modified Polypropylene 141-143 0.94 5.0-7.0 22.0 2.0-4.0%Micropro 700 Modified Polypropylene/PTFE 149-154 1.04 5.0-7.0 22.0 0.5-4.0%MP-22VF Synthetic 102-106 0.94 6.0-8.0 22.0 1.0-3.0%MP-22XF Synthetic 102-106 0.94 5.0-6.0 22.0 1.0-3.0%MPP-615VF Polyethylene 114-116 0.95 6.0-8.0 22.0 0.5-1.5%MPP-620VF Polyethylene 114-116 0.95 6.0-8.0 22.0 0.5-1.5%NyloFine 1000 PPA/Polyphthalamide >279 1.19 6.0-10.0 31.0 1.0-2.0%NyloTex Series Polyamide 218-224 1.14 wide range available 4.0-6.0%Polyfluo® 535 Polyethylene/PTFE 108-115 1.02 5.0-6.0 22.0 1.0-3.0%Polyfluo® 540 Polyethylene/PTFE 108-115 1.02 5.0-6.0 22.0 0.5-1.0%PropylMatte 31 Polypropylene 160-170 0.86 8.0-12.0 31.0 1.0-4.0%PropylMatte 31HD Modified Polypropylene 160-170 1.07 8.0-12.0 31.0 1.0-5.0%PropylTex Series Polypropylene 160-170 0.86 wide range available 3.0-10.0%SuperGlide 904 Polyethylene/Amide 138-145 0.97 4.0-6.0 22.0 0.5-3.0%Superslip 6515 Polyethylene/Amide 124-137 0.95 6.0-8.0 22.0 0.5-3.0%Superslip 6525 Polyethylene/Amide 135-145 0.95 6.0-8.0 22.0 0.5-3.0%Superslip 6530 Polyethylene/Amide 135-145 0.95 6.0-8.0 22.0 0.5-3.0%Synfluo 172VF Synthetic/PTFE 104-110 1.01 4.0-7.0 22.0 0.5-2.0%Synfluo 172XF Synthetic/PTFE 104-110 1.01 3.5-6.0 18.5 0.2-2.0%Synfluo 178VF Synthetic/PTFE 104-110 1.03 5.0-7.0 22.0 0.5-2.0%Synfluo 178XF Synthetic/PTFE 104-110 1.03 3.0-5.0 11.0 0.5-2.0%Synfluo 180XF Synthetic/PTFE 104-110 1.10 3.0-5.0 11.0 0.1-0.3%




high performance wax additives - pci mag · pdf filefluo ptfe ... high performance wax...

Documents