high mast®

Lamp types included

> 1000W Metal-Halide

> 400W - 600W SON-T

> 400W CDMT3

approvals

Complies with:

BS EN 1991-1-4

BS EN 60598

ILE Tech Report.7

CE

For further information please visit

the Holophane website

www.holophane.co.uk

The Holophane HMS2 High Mast® system is easily the most simple and versatile on the market. Flexible, functional and completely safe, the system can be used with a choice of two modern luminaire types offering total flexibility of light distribution. The latching raise and lower system utilises heavy duty stainless steel cables allowing all maintenance to be carried out at ground level using a bespoke portable elevation cart. The extended remote control facility permits the operator to stand at a safe distance from the base of the column and also provides the operator to vary the speed of the lantern ring lowering operation.

available with

> Seattle Large Flood > Seattle Medium Flood

features and benefits

Precise Light Control

> Maximum efficiency & low glare

Flexibility of Light Distributions

> Maximum efficiency and uniformity for any application

Minimal Upward Light

> ‘Night time friendly’

Shock Absorbing Lantern Carriage Ring

> Safe & dependable raise lower systemn

Polymer Coated Latch System

> Prevents in-situ seizure

> Eliminates tension on hoisting cables

Elevation Cart with External Winch and Variable Speed Remote Control

> Ground level maintenance

> Less components to maintain in the field

> Control speed of lantern carriage elevation

Simple & Up-to Date Electrical System

> Flexibility

Versatile Mounting Arrays

> Flexibility

specification

The luminaire shall consist of a extruded heat sink manufactured from 6063-T5 aluminium which allows for superior thermal management. The channel, endplates and driver tray are manufactured from steel treated and then painted to ensure corrosion resistance. The optical arrangement consists of precision formed optics utilising 97+% reflective Alanod® MIRO-SILVER® specular-aluminium coupled with a diffuse acrylic lens to provide glare control and protect the LEDs. Access to gear compartment is via the removable tray which utilises plugable harnesses to allow easy access to key electrical components.

applications

Freight terminals

Industrial parks

Car parks

Railway sidings

Airports

Docks

Motorways

Interchanges

windage

Seattle Medium 0.084m2

Seattle Large 0.113m2

Seattle large 1000W* 0.18m2

*with remote gear attached.

Junction box

HMS2 High Mast®

Luminaire mounting with safety retaining

Seattle Medium Flood

weight & thermal data

Lamp Type Weight (kg) Min. Operating Max. Ambient Temperature (°C) Temperature (°C)

Seattle Medium Flood

400W High Pressure Sodium 13.5 -30 35

400W Metal Halide 13.5 -20 35

Seattle Large Flood

600W High Pressure Sodium 20 -30 40

400W Metal Halide 20 -20 40

1000W Metal Halide* 32.4 TBC TBC

*with remote gear attached.

150mm

150mm

dimensions in mm

luminaire specification

Seattle Large Flood

Two-piece diecast aluminium body and door frame with a maximum depth of 190mm, housing all integral control gear for a variety of high intensity discharge lamps. Hinged body & door, tool-less access and IP65 sealed. The luminaire complies with EN60598 and is mounted to lantern carriage ring via M16 nut & bolt fixing through luminaire stirrup. Supplied painted in RAL7053 with option of corrosive environment enhanced paint finish.

Seattle Medium Flood

Two-piece diecast aluminium body and door frame with a maximum depth of 172mm, housing all integral control gear for a variety of high intensity discharge lamps. Hinged body & door, tool-less access and IP65 sealed. The luminaire complies with EN60598 and is mounted to lantern carriage ring via M16 nut & bolt fixing through luminaire stirrup. Supplied painted in RAL7053 with option of corrosive environment enhanced paint finish.

performance

L92 lumen maintenance at 60,000 hours; predicted life of more than 100,000 hours (L70). Thermally protected driver(s) standard with 0-10V dimming. LEDs are driven at 350mA (nominal) to provide optimal lumens per watt and less heat to extend component life.

controls

With the option of a simple plug and play control connection for 1-10V dimming, Proteon is fully compatible with the Holophane HOLOS2 controls package. To find out more please visit www.holophane.co.uk

light distribution

Asymmetric 42° Asymmetric 60°Asymmetric 42ºAsymmetric 60º Asymmetric 42ºAsymmetric 60º

headframe & mast specification

The Holophane HMS2 High Mast System consists of a fixed headframe, top latching lantern carriage ring for luminaire mounting complete with electrical distribution box and ground test socket, lockable MCB switchbox in base of the column and foundation cage. Holophane recognises the importance to provide full technical support and to provide all necessary information when selecting High Mast. Please refer to your local Holophane sales engineer for full details.

positive fail-safe latching

The lantern carriage ring is fully supported by the fixed headframe at the top of the column once raised and in normal operation. Its weight is supported via three high-strength suspension plates thus leaving the stainless steel raise & lower cables totally stress-free, ensuring long cable life.

raise and lower system

The luminaire mounting ring is raised and lowered by means of 3 heavy-duty stainless steel cables. Lantern carriage ring stability throughout the raise/lower operation is ensured by three shock-absorbing spring assemblies, allowing safe operation of the raise and lower system in up to 111km/h winds.

ground level maintenance

A weatherproof power socket mounted on the luminaire ring enables the system to be energised and tested at ground level. The normal mast electrical supply is used for this purpose without the requirement for additional extension cables. There is no electromechanical disconnect at the top of the column and therefore all maintenance is carried out at ground level.

elevation cart with remote control

The portable elevation cart can be used to service a whole site. It consists of a motor driven winch and variable speed remote control which together are used to elevate & lower the lantern carriage ring during maintenance. As the winch is not in the column it is not subject to the same conditions as the mast thus prolonging its life and reducing the number of components to inspect.

top of column

5-core cable for 3-phase supply to lantern carriage ring

Electrical distribution junction box with ground test socket on lantern carriage ring

base of column

5-pole industrial IP65 plug & socket to disconnect headframe supply during lowering

Lockable Switchbox for mains isolation

HMS2 electrical system

map of permitted installation sites

The following map should only be used as a reference tool. Final installation site

suitability should always be determined by a chartered civil engineer given the

information in the above table!

Suitability is based on Terrain Category Type II (REF: BS EN 1991-1-4).

HMS2 technical data

The following information should be provided to the contractor or civil engineer for site suitability analysis and foundation design. Holophane Europe Ltd will take no responsibility for the foundation design and structural sign-off.

Important: Please check with civil engineer for intallation suitability in terrain category 0 & i (coastal, flat & mountainous regions ref: BS EN 1991-1-4).

Height (M)

Column Base Dia.

(mm)

Foundation Cage Flange Dia. (mm)

Foundation Cage P.C.D

Foundation Bolt

Max. Head

Height (KGs)

Max. Head

Wind Area (m2)

Overturning Moment (kN/m)

Vertical Load (kN)

20 531 728 628mm x 20 M27 450 2.4 247 16

25 611 810 710mm x 20 M27 450 2.2 350 21

30 694 892 792mm x 20 M27 450 1.9 473 25

notes• IN ACCORDANCE TO EUROCODE 1 (BS EN 1991-1-4). Vref = 31m/s, Terrain Category type II. • Values apply to all headframe arrangements using Holophane Seattle SMF & SLF luminaires.

headframe arrangement

The following lantern carriage ring arrangements are offered as standard:

British Isles Germany

Suitable

Unsuitable

12 head 1kW configuration

Holophane installation and maintenance team

When you purchase a product from Holophane you purchase more than just a lighting luminaire, you also get a full pre and post-sales solution.

One of these solutions is our Field Service department who are a fully trained and experienced service team who support our extensive product range. We offer a complete value added package ranging from servicing to after-sales care.

Services include

> Mechanical Installation of Holophane High Mast columns and

Head frames onto prepared foundations.

> Full and partial lamp replacement regimes.

> Light meter readings to verify

light designs by Holophane.

> Demonstration of how to operate the High Mast system and its power tools.

Projects Include

> Siemens Train Care, Northampton

> Trafford Shopping Centre

> B&Q Cleveland

> Mahle Filters, Salisbury

> Tesco Barrow in Furness

To find out more please visit

www.holophane.co.ukordering details - high mast

Example

Code HMS2 HMS2 high-mast system

Code Enclosure (required)

.SLF Seattle Large Floodlight

.SMF Seattle Medium Floodlight

Code Lamp (required)

.400XT 400W SON-T

.400CDMT3 400W CDMT3

.600XT 600W SON-T

.1000MHN 1000W METAL-HALIDE

Code Optics (required)

.AY Asymmetric distribution (42° peak beam)

.AY60 Asymmetric distribution (60° peak beam)

Code Paint Finish (required)

.C Enhanced paint finish

Code Column Height (required)

.20M 20m mast height

.25M 25m mast height

.30M 30m mast height

Code Suspension (required)

.4W 4-way symmetrical

.6W 6-way symmetrical

.8W 8-way symmetrical

.12W 12-way symmetrical

HMS2 .SLF .400XT .AY .C .20M .4W

high mast - accessories Code Fixing Method (required)

HMS2-FS20M HMS2 foundation cage hez 20m

HMS2-FS25M HMS2 foundation cage hez 25m

HMS2-FS30M HMS2 foundation cage hez 30m

Code Elevation Cart (required accessory)

HMS2-ELECART HMS2 elevation cart

Code Delivery (accessory)

HMS2-DEL Delivery of HMS2 system

Pre-installation notes

The installation site and project must accommodate the following installation requirements:

1. ENSURE 3.5M RADIAL AREA FROM CENTRE OF MAST FOR MAINTENANCE ACCESS:

2. MAST CAN ONLY BE INSTALLED ON FLAT GROUND:

3. ENSURE 160mm PROJECTED FOUNDATION STUD LENGTH WHEN INSTALLING THE FOUNDATION CAGE:

Pub

licat

ion

No.

HM

S U

K 0

11

3

Holophane Europe LimitedBond Avenue, Bletchley, Milton Keynes MK1 1JG United KingdomTelephone: +44 ( 0 ) 1908 649292 UK Fax: +44 ( 0 ) 1908 367618International Fax: +44 ( 0 ) 1908 272029E-mail: info@holophane.co.uk

www.holophane.co.uk

Get the free mobile app at http://gettag.mobi