hmao led - iluminacionacc.com.co...holophane® 2 holophane® | infrastructure | hmao led hmao ™...

HMAO™ LED High Mast Series

HOLOPHANE®

2 HOLOPHANE® | Infrastructure | HMAO LED

HMAO™ LED

The hMAO LeD SerieS LuMinAire iS A highLy

engineereD high MAST prODucT TArgeTing bOTh

The repLAceMenT AnD new cOnSTrucTiOn MArkeT.

FOcuSeD On prOviDing exceLLenT viSibiLiTy wiTh An

LeD LighT SOurce ThAT reSuLTS in LOng SySTeM

LiFe AnD exceLLenT uniFOrMiTy, The hMAO LeD

SubSTAnTiALLy reDuceS MAinTenAnce AnD energy

cOSTS up TO 75% Over incuMbenT high inTenSiTy

DiSchArge LighTing SySTeMS.

To meet these 21st century needs, it is imperative that the LED system is properly engineered for thermal and performance considerations. Holophane has exhausted many hours of research and development to ensure reliability through innovative integration of this exciting technology.

High Mast Advanced Optix

| Outdoor Lighting

HOLOPHANE® | Infrastructure | HMAO LED 3

Features and Benefits

O Permanent prismatic glass optics protect LEDs, control light, and reduce source glare

O Prismatic glass optics provide an overlapping light pattern resulting in high application efficacy and excellent uniformity

O Multiple lumen packages provide customer choices on light levels and energy savings

O Optimized maintained thermal management system for maximum performance, long life, and reliability

O Ease of replacement of existing HID luminaires without rewiring or changing existing luminaire mounting arms

O Robust design with IP66 optics, low copper 356 alloy castings, 3 G rated for high vibration applications, and long system paint and hardware life.

Typical Applications

O Port Container Facilities

O Highways and Interchanges

O Toll Plazas

O Rail Yards

O Correctional Facilities

O Large Area Industrial Facilities

O Parking Areas

O Airports

O Truck Stops

O Security Lighting

Cast aluminum optical cover

Removable driver door

LED module consists of cold forged aluminum heat sink, chip-on-board LED, internal reflector, and gasketed prismatic glass refractor.

Optical modules with prismatic glass Lens

Long driver life a result of exposed heat sink on top side of electrical housing.

LED Optical Module

Optical assembly rotates 180° to align “street side” with roadway for asymmetric distribution.

Twist-off photocontrol is adjustable and is ROAM compatible.

Hinged removable driver assembly mates to electrical housing for easy access to terminal block, mounting bolts, and surge protection.

Perforated aluminum environment guard

HOLOPHANE®


Cast aluminum bottom plate for 7, 11 or 14 modules

Holophane’s optical expertise with borosilicate prismatic glass manufactured in Newark, Ohio spans over 120 years.

Thermal Performance

Electrical current that is not converted into light at the semi-conductor junction turns into heat and results in increasing temperature that reduces lumen output and LED life. Junction temperature is affected by the ambient temperature surrounding the LEDs, the thermal path junction through the aluminum heat sink, air flow through the unit and the outside ambient temperature.

The HMAO LED luminaire incorporates a cold forged aluminum heat sink providing excellent thermal transfer for the modular chip-on-board LED. Providing both air convection and conduction keeps the LEDs cool ensuring longer life, high delivered lumens over time, and color consistency. No internal fans or alternate cooling devices are required in the HMAO LED as these non-passive systems add complexity and a source of failure long term for outdoor rated LED luminaires.

Holophane HMAO LED luminaires are designed for a minimum of 100,000 hours of maintenance – free operation in a 25C ambient attaining 76 percent of initial lumen output over a 25 year life cycle. (4000 hours/year operation)

Optional twist-off photocontrol receptacle

Heat dissipating fins ensure long LED driver life

| Outdoor Lighting


Optical housing rotates to orientate “street side” to roadway

Applications

The hMAO LeD LuMinAire prOviDeS SuperiOr beneFiTS FOr LighTing rOADwAyS, inTerchAngeS AnD A vArieTy OF LArge AreA AppLicATiOnS. MOTOriSTS neeD The FuLL pAnOrAMic view prOviDeD by Our hMAO LeD TO SAFeLy AcceSS Driving cOnDiTiOnS. The uniFOrMiTy OF verTicAL AnD hOrizOnTAL LighTing enhAnceS nighTTiMe SecuriTy AT cOrrecTiOnAL FAciLiTieS AnD heLpS prOTecT viTAL equipMenT in pOrT cOnTAiner FAciLiTieS AnD FreighT TerMinALS.

HOLOPHANE®


| Outdoor Lighting


HOLOPHANE®


Application EfficacyA major benefit of the HMAO LED luminaire is directing the distribution on task, a result of high application efficacy of the luminaire LED chip-on-board modular light engine. In addition, the prismatic glass optics provide overlapping distribution from each LED module eliminating potential dark spots and improving safety. The prismatic glass optics minimize the direct view of source LED, reducing glare and improving visual comfort. The HMAO LED luminaire is virtually maintenance free, a result of the long system life of the LED system with rated life approaching 25 years operation.

The example below illustrates the benefit of the HMAO LED versus a HID system illuminated with the high pressure sodium high mast luminaire in a Port Authority application. The benefit to the customer is that the white light source of the LED provides excellent uniformity, improving visibility within the application space and provides substantial energy savings.

The HMAO LED is designed to replace existing HID luminaires for large area and roadway applications. In addition to the poor color attributes associated with high pressure sodium lighting, lighting levels are decreased due to source lamp lumen depreciation over time, dirt accumulation and lamp and ballast outages. Below is a direct comparison of a Port Application where high pressure sodium luminaires have been in service for 15 years. The HMAO LED offers three lumen packages that allow customer to choose the best option for their particular application to maximize energy savings.

HPS Installation HMAO LED Installation

*(Port application, 300' x 425', 120' pole height, 12 fixtures per pole, C1HP footcandle levels measured at job site. HMLED data based on lumen depreciation at 30,000 hours.)

Luminaire HPS HMLED14 HMLED11 HMLED07

Source C1HP* 14LED’s* 11LED’s* 07 LED’s*

Average 3.02 3.2 2.6 1.64

Maximum 4.16 4.1 3.2 2.0

Minimum 1.88 2.1 1.8 1.15

Avg/Min 2.21 1.52:1 1.45:1 1.43:1

Max/Min 1.61 1.95:1 1.78:1 1.74:1

Footcandle equivalent 100% 86% 54%

Wattage 1090 551 437 284

$/kwhr $0.15 $0.15 $0.15 $0.15

Hours 4400 4400 4400 4400

Energy/Luminaire $719.40 $363.66 $288.42 $187.44

Energy Savings/Luminaire $356 $431 $532

% Energy Savings/Luminaire 49% 60% 74%

| Outdoor Lighting


19721100 SeriesFirst prismatic glass optics high mast luminaire with multiple optical choices and wattages for roadway and area lighting

Our History in High Mast Lighting Spans Five Decades

1973Lowering DeviceFirst raise/lower device for ground level servicing of high mast luminaires installed on pole heights ranging from 50-100 feet.

1984HMST SeriesAddressed mechanical issues with servicing high mast luminaires while incorporating prismatic light control and expanding to 35 different combinations of wattage and distributions and cutoff classifications to satisfy area and roadway applications

1986HMSCFully enclosed luminaire designed to address “cutoff” lighting requirements

1997HMSDFully prismatic open bottom reflector with “full cutoff” distribution to address areas sensitive to sky glow and light trespass concerns

2000HMSPLuminaire featured rear surface metallized glass reflector providing full cutoff capability in multiple distributions that included long and narrow distribution for increased pole spacing

2007HMAOHigh Mast Advanced Optix utilizes highly reflective specular panels in a sealed glass optic providing a platform for both full cutoff and non-cutoff refractor assemblies that can maximize pole spacing’s and reduce energy load for high mast applications

2012HMAO LEDHighly engineered LED solution with prismatic glass optics and multiple lumen packages. Maximizes energy savings, increases maintenance savings for replacement of existing luminaires and new construction applications

HOLOPHANE®


Ordering Information

Mechanical:• Low copper 356 cast aluminum electrical and optical housing• Two bolt horizontal arm mount with +-3 degree vertical adjustment• Two captive bolts disengage the top electrical cover for easy access to terminal block for wiring • External perforated aluminum environmental guard protects against dirt and debris infiltration• Finish shall pass 1000 hour salt fog test per ASTMB117 and D1654• Rotatable optical assembly to align asymmetric distribution to roadway• IP66 rated LED modules , IP 55 electrical assembly per IEC600069• Vibration rated to 3G per ANSI C136.31

Electrical:• Quick disconnect connectors for ease of installation and maintenance• Three stage terminal block for ease of installation• Class I LED drivers rated for 85,000 hours life minimum• Surge protection meets 10KV/5KA per ANSI/IEEEC62.41 • Driver power factor a minimum of 90%• Drivers meets maximum total harmonic distortion (THD) of 20% and are ROHS compliant

Controls:• Twist off photo control receptacle is adjustable without tools and is ROAM compatible

Optical:• Multi die LED chip-on-board (COB) technology comprised of array of individual LEDs on one board, less solder points, more reliable, and dense light source provides better optical control

• Color temperature options of 4000K and 5000K with CRI of 65 minimum• Prismatic glass optics provides permanence of material, never yellows, with overlapping distribution eliminating dark spots in application space • Prismatic glass optics in both asymmetric and symmetric distribution• Zero uplight reduces sky glow and meets Dark Sky requirements• Prismatic glass optics minimizes direct glare of LED light• Optional house side shielding

Manufacturing/Warranty:• UL1598, 25°C, wet location safety listing• Manufactured in Crawfordsville, Indiana• Luminaire is manufactured to be ARRA compliant• Tested 100% electrical for all luminaires prior to shipment• Five years manufacturing experience in LED based products • Five year limited warranty located at www.acuitybrands.com/ CustomerResources/Terms_and_conditions.aspx

Performance Specifications

Dimensional Details584.2mm

(23”)

635mm(25”)

431.8mm(17”)

HMAO LEDMaximum weight: 76lbs (37.2kg) Maximum E.P.A.: 1.59 sq. ft.

584.2mm(23”)

635mm(25”)

431.8mm(17”)

HMAO LED LuMEn PAckAgEs 5000k, 480V

Number of LED modules Lumens Wattage Lumens/Watts L70 Life

7 22,049 291 76 >100,000 hours

11 34,962 444 79 >100,000 hours

14 41,934 560 75 >100,000 hours

| Outdoor Lighting


Preferred Selections:

Most Frequently Ordered Catalog Numbers

Catalog Numbers for Entire Product Offering(Pricing and lead times may be affected)

STEP 1: LuMinAirE

HMLED High Mast LED

STEP 2: LED MODuLEs

07 07 Modules 11 11 Modules 14 14 Modules

STEP 3: cOLOr TEMP

4k 4,000 CCT+/-250K 5k 5,000 CCT+/-250K

STEP 4: VOLTAgE

As Auto-sensing voltage (120 thru 277V) AH Auto-sensing voltage (347 thru 480V)

STEP 5: cOLOr

A As specified g Gray H Graphite k Black W White

3cOLOr TEMP

4K 5K

5K4

VOLTAgE

AS AH

AH5

cOLOr

A G H K W

G6

OPTicAL

L2 L5

L57

OPTiOns

FD1 FD2 PCS P34 P48 PSC R

FD11

LuMinAirE

HMLED

HMLED2

LED MODuLEs

07 11 14

14

®®

STEP 6: OPTicAL

L2 Type II, medium asymmetrical L5 Type V, symmetrical

STEP 7: OPTiOns

FD1 Single fusible disconnect FD2 Double fusible disconnect Pcs 1,2,3 DTL solid-state lighting photocontrol 120-277V P34 1,2,4 DTL twist-off photocontrol for 347V P48 1,2,4 DTL twist-off photocontrol for 480V Psc 1,5 Shorting cap r 6 Photocontrol receptacle

1 Must be used with option R 2 Not available with option PSC 3 Not available with voltage code AH 4 Not available with voltage code AS 5 Shortening cap available with photocontrol 6 Photocell not included

STEP 8: AccEssOriEs

F1 Single fusing kit F2 Double fusing kit HMLEDsD90 90° shield HMLEDsD120 120° shield HMLEDsD180 180° shield

8AccEssOriEs

F1 F2

HMLEDSD90 HMLEDSD120 HMLEDSD180

F1

Acuity Brands Lighting, Inc.

Holophane Headquarters, 3825 Columbus Road, Granville, OH 43023

Acuity Brands Lighting Canada, Inc., 35B Minthorn Blvd., Markham, ON., L3T 7N5

Holophane Europe Limited, Bond Ave., Milton Keynes MK1 1JG, England

Holophane, S.A. de C.V., Km. 31 Carretera Mexico-Cuautitlan 54900 Tultitlan Edo. De Mexico

Contact your local Holophane factory sales representative for application assistance, and computer-aided design and cost studies. For information on other Holophane products and systems, call the Inside Sales Service Department at 866-759-1577. In Canada call 905-886-8967 or fax 905-886-7973.

Warranty Five-year limited warranty. Full warranty terms located at www.acuitybrands.com/CustomerResources/ Terms_and_conditions.aspx

Visit our web site at www.holophane.com

Product specifications may change without notice. Please contact your local Holophane factory sales representative for the latest product information.

HL-2482 7/12 ©2012 Acuity Brands Lighting, Inc. All Rights Reserved. Data obtained from the Mohawk Paper environmental calculator

Printed in USA

The eco savings in the production of this brochure:

1 tree preserved for the future

4 lbs waterborne waste not created

527 gallons wastewater flow saved

58 lbs solid waste not generated

115 lbs net greenhouse gases prevented

878,220 BTUs energy not consumed

hmao led - iluminacionacc.com.co...holophane® 2 holophane® | infrastructure | hmao led hmao ™...

Documents