hempel book deco

8/10/2019 Hempel Book Deco

1/97


2/97Product Data Sheet

PRODUCT DATA SHEETS

NUMERICAL INDEX

DECORATIVE PAINTS

Product no. Product Name Date

02350 HEMPELS WOOD PRESERVATIVE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200302450 HEMPELS WOOD STAIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .August 200302500 HEMPELS COLOUR VARNISH.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200005250 HEMPELS PARQUET VARNISH.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200005990 HEMPELS EPOXY SEALER.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .August 200006600 HEMPELS BINDER/SEALER.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200009810 HEMPELS BINDER/SEALER.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200022460 HEMPELS ALKYD UNDERCOAT.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200026600 HEMPELS CONTEX SEALER.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200326630 HEMPELS ACRYLIC PRIMER/SEALER.. .. . . . . . . . . . . . . . . . . . . . . . . . . . . .August 200328600 HEMPELS CONTEX PRIMER W/B.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . March 200228830 HEMPELS PRIMER/SEALER.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200035230 HEMPELS EPOXY FILLER.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200036610 HEMPELS FILLER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200038820 HEMPELS INTERIOR FILLER.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200038830 HEMPELS EXTERIOR FILLER.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200038860 HEMPELS SPATTER FINISH.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200038900 HEMPELS ACRYLIC FILLER.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200045450 HEMPELS EPOXY TEXTURE.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200046600 HEMPELS CONTEX SMOOTH.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200048600 HEMPELS CONTEX SMOOTH W/B.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . March 200248740 HEMPELS SMOOTH TEXTURE.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . April 200052040 HEMPELS GLOSS ENAMEL.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200052060 HEMPELS FLAT ENAMEL.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200052080 HEMPELS SEMI-GLOSS ENAMEL.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200052410 HEMPELS METALLIC PAINT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200052940 HEMPALUX GLOSS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200052980 HEMPALUXSEMI-GLOSS.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200055100 HEMPATHANEENAMEL.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200055210 HEMPATHANETOPCOAT.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200056360 HEMPATEXENAMEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200056610 HEMPELS CONTEX FINE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200056620 HEMPELS CONTEX MEDIUM.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200058100 HEMUCRYLENAMEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200058230 HEMUCRYLTOPCOAT HI-BUILD.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200058260 HEMPELS ACRYLIC SILK EMULSION. .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200058270 HEMPELS NON-DRIP ACRYLIC EMULSION .. .. . . . . . . . . . . . . . . . . . . . . . . August 200058330 HEMPELS SILK EMULSION.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200058410 HEMPELS CONTRACT EMULSION.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200058440 HEMPELS WALL VARNISH.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200358470 HEMPELS WALLART. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200358540 HEMPELS SILK TEXTURE.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200058610 HEMPELS INTERIOR EMULSION.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . March 200158650 HEMPELS GLOSS EMULSION.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200058660 HEMPELS RUSTIK-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200058670 HEMPELS RUSTIK-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200058680 HEMPELS RUSTIK-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200058710 HEMPELS FLAT EMULSION.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . March 200158720 HEMPELS ACRYLIC EMULSION.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .August 200058770 HEMPELS SUPER FINE TEXTURE.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200058810 HEMPELS ROOF COATING.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200058840 HEMPELS MULTI TEXTURE.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200058850 HEMPELS FINE TEXTURE.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200058860 HEMPELS MEDIUM TEXTURE.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200058870 HEMPELS COARSE TEXTURE.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 200058910 HEMPELS ACRYLIC EMULSION.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .August 2000

1/1

Issued: August 2003 Page 1 of 1


3/97

Product DataProduct Data

Product Data Sheet

HEMPEL

HEMPEL'S WOOD PRESERVATIVE 02350

Description: HEMPEL'S WOOD PRESERVATIVE 02350 is a transparent wood preservative based onmodified alkyd. Good penetration into new and old wood. The product contains biocideto prevent growth of fungus and mould and UV filter to reduce the degrading effect ofthe sunlight.

Area of use: Wooden structures.

Substrates: Wood.

PHYSICAL CONSTANTS:Colours/Shade nos: Transparent/00000Finish: FlatVolume solids, %: 9 1Theoretical spreading rate: Not relevant (see REMARKS below)Flash point: 43CSpecific gravity: 0.8 kg/litreDry to touch: 8 hours (20C)

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They aresubject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

APPLICATION DETAILS:Application method: Brush DippingThinner (max. vol.): None NoneCleaning of tools: THINNER 08230 or 08110Recoat interval, min: 24 hours (20C) (see REMARKS below)Recoat interval, max: None

Surface condition: The surface should be stable, firm, dry and free of contaminants like dust, dirt, oil,grease and fungus.

Remarks: HEMPEL'S WOOD PRESERVATIVE 02350 should be applied wet-on-wet until fullsaturation is obtained. Wipe off any excess material to avoid a glossy surface after

drying. The consumption will depend on the ability of the wood to absorb thepreservative, but a guideline for practical coverage will be 3-5 m2/litre in the case ofrough wood and 4-6 m2/litre in the case of dressed wood. HEMPEL'S WOODPRESERVATIVE 02350 is most effectively applied by brush. Cut ends should, ifpossible, be dipped. Drying data is given on the assumption that proper ventilation isprovided. Recoating with products dissolved in white spirit may take place after 24hours (20C). For optimum protection against sunlight, recoat with HEMPEL'SWOODSTAIN 02450.

Note: HEMPEL'S WOOD PRESERVATIVE 02350 is for professional use only.

Safety: Handle with care. Before and during use, observe all safety labels on packaging andpaint containers, consult HEMPEL Material Safety Data Sheets and follow all local ornational safety regulations. Avoid inhalation, avoid contact with skin and eyes, and donot swallow. Take precautions against possible risks of fire or explosions as well as

protection of the environment. Apply only in well ventilated areas.

ISSUED BY: HEMPEL A/S - 0235000000CS001

1/1


This Product Data Sheet supersedes those previously issued.For explanations, definitions and scope, see Explanatory Notes in the HEMPEL Book.Data, specifications, directions and recommendations given in this data sheet represent only test results orexperience obtained under controlled or specially defined circumstances. Their accuracy, completeness or appro-riateness under the actual conditions of any intended use of the Products herein must be determined exclusively

by the Buyer and/or User.The Products are supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OFSALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in writing. The Manufacturer and Sellerdisclaim, and Buyer and/or User waive all claims involving, any liability, including but not limited to negligence,

except as expressed in said GENERAL CONDITIONS for all results, injury or direct or consequential losses ordamages arising from the use of the Products as recommended above, on the overleaf or otherwise.Product data are subject to change without notice and become void five years from the date of issue.


4/97


Product Data Sheet

HEMPEL

HEMPEL'S WOOD STAIN 02450

Description: HEMPEL'S WOOD STAIN 02450 is a durable modified alkyd-based wood stain forprotection of all types of wood. The product contains biocides to prevent growth offungus and mould. Contains UV filter to reduce the degrading effect of the sunlight.

Area of use: Wooden structures.

Substrates: Wood.

PHYSICAL CONSTANTS:Colours/Shade nos: Teak/08563 or according to HEMPEL's colour cardFinish: FlatVolume solids, %: 34 1Theoretical spreading rate: Not relevant (see REMARKS below)Flash point: 42CSpecific gravity: 0.9 kg/litreDry to touch: 8 hours (20C)


APPLICATION DETAILS:Application method: Brush DippingThinner (max. vol.): None NoneCleaning of tools: THINNER 08230 or 08110 (20%) THINNER 08230 or 08110 (20%)Recoat interval, min: 8 hours (20C)Recoat interval, max: None

Surface condition: The surface should be stable, firm, dry and free of contaminants like dust, sand, looseold paint, dirt, oil, grease and algae. The moisture content of the wood should notexceed 16 %. Avoid cleaning or grinding of the surface with steel wool or similar asthis may cause rust stains.

Wood preserver: New wood (except teak and vacuum impregnated wood) and bare spots of previouslytreated wood should be saturated with HEMPEL'S WOOD PRESERVATIVE 02350.

Remarks: Do not apply under humid conditions or at temperatures below 5C.The consumption will depend on the ability of the wood to absorb HEMPEL'S WOODSTAIN 02450, but a guideline for practical coverage is 5-10 m2/litre in the case ofrough and absorbing wood and 10 -20 m2/litre in the case of dressed wood.Certain hard wood types may require thinning up to 20% to ensure proper penetration.HEMPEL'S WOOD STAIN 02450 is most effectively applied by brush. Drying data isgiven on the assumption that proper ventilation is provided. Apply 1 or more coats toobtain the desired colour and a uniform appearance. Different colours will be obtaineddepending on the type of wood and the ability of the wood to absorb the material.Please note that the shade becomes darker after repeated treatment.

Note: HEMPEL'S WOOD STAIN 02450 is for professional use only.

Safety: Handle with care. Before and during use, observe all safety labels on packaging andpaint containers, consult HEMPEL Material Safety Data Sheets and follow all local ornational safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do

not swallow. Take precautions against possible risks of fire or explosions as well asprotection of the environment. Apply only in well ventilated areas.


1/1



by the Buyer and/or User.The Products are supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OFSALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in writing. The Manufacturer and Sellerdisclaim, and Buyer and/or User waive all claims involving, any liability, including but not limited to negligence,except as expressed in said GENERAL CONDITIONS for all results, injury or direct or consequential losses ordamages arising from the use of the Products as recommended above, on the overleaf or otherwise.Product data are subject to change without notice and become void five years from the date of issue.


5/97


Product Data Sheet

HEMPEL

HEMPEL'S COLOUR VARNISH 02500

Description: HEMPEL'S COLOUR VARNISH 02500 is a quick-drying, clear urethane varnish. Theproduct is available in many attractive colours and is used for interior and exteriordecoration of wood. Contains UV filter to reduce the degrading effect of the sunlight.

Area of use: Interior and Exterior: Windows and door frames, skirting, furniture, etc.

Substrates: Wood.

PHYSICAL CONSTANTS:Colours/Shade nos: Red/08569 or according to HEMPEL's colour cardFinish: Glossy Volume solids, %: 46 1Theoretical spreading rate: 18.4 m/litre - 25 micron*Flash point: 38CSpecific gravity: 0.9 kg/litreDry to touch: 3 hours (20C)

*The theoretical spreading ratehas been calculated for the stated volume solids and

dry film thickness.

A practical spreading rate will depend on the actual dry film thickness, the nature of thesubstrate and the relevant consumption factor.


APPLICATION DETAILS:Application method: Flat varnish brushThinner (max. vol.): 1st coat (20%) 2nd coat (10%) 3rd coat (None)Cleaning of tools: THINNER 08230 or 08110Indicated film thickness, dry: 25 micronIndicated film thickness, wet: 50 micronRecoat interval, min: 6 hours (20C)Recoat interval, max: None

Surface condition: The surface should be stable, firm, dry and free of contaminants like dust, old paint,dirt, oil, grease and algae. The moisture content of the wood should not exceed 16 %.

Wood preserver: New wood (except teak and vacuum impregnated wood) and bare spots of previouslytreated wood should be saturated with HEMPEL'S WOOD PRESERVATIVE 02350.

Remarks: Do not apply under humid conditions or at temperatures below 5C.Drying data is given on the assumption that proper ventilation is provided. Apply one ormore coats to obtain the desired colour and a uniform appearance. When the desiredcolour is obtained, apply HEMPEL'S COLOUR VARNISH 02500 until the required finishand protection is achieved. A total of four coats is normally required on new wood,depending on the wood type.As the product is partly transparent, the resulting colour will depend on the type andcolour of the wood.

Note: HEMPEL'S COLOUR VARNISH 02500 is for professional use only.

Safety: Handle with care. Before and during use, observe all safety labels on packaging and

paint containers, consult HEMPEL Material Safety Data Sheets and follow all local ornational safety regulations. Avoid inhalation, avoid contact with skin and eyes, and donot swallow. Take precautions against possible risks of fire or explosions as well asprotection of the environment. Apply only in well ventilated areas.


1/1



by the Buyer and/or User.The Products are supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OFSALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in writing. The Manufacturer and Seller

disclaim, and Buyer and/or User waive all claims involving, any liability, including but not limited to negligence,except as expressed in said GENERAL CONDITIONS for all results, injury or direct or consequential losses ordamages arising from the use of the Products as recommended above, on the overleaf or otherwise.Product data are subject to change without notice and become void five years from the date of issue.


6/97


Product Data Sheet

HEMPEL

HEMPEL'S PARQUET VARNISH 05250

Description: HEMPEL'S PARQUET VARNISH 05250 is a one-component moisture curing, clearpolyurethane varnish. The product is easy to apply and has good adhesion to wood. Itgives a flexible but hard glossy surface, resistant to normal wear on wooden floors. It isideal in kitchens and other areas where spillage of foodstuff and domestic cleaningagents may occur.

Area of use: Interior: New or previously varnished parquet floors and other wooden items such asstairs, handrails, windows, doors, etc.

Substrates: Wood.

PHYSICAL CONSTANTS:Colours/Shade nos.: Transparent/00000Finish: Glossy Volume solids, %: 35 1Theoretical spreading rate: 14.0 m/litre - 25 micron*Flash point: 26CSpecific gravity: 1.0 kg/litreDry to touch: 1 hour (20C)

*The theoretical spreading rate has been calculated for the stated volume solids and

dry film thickness.

A practical spreading rate will depend on the actual dry film thickness, the nature of the

substrate and the relevant consumption factor.


APPLICATION DETAILS:Application method: Flat varnish brush Air Spray Thinner (max. vol.): 08880 (5%) 08880 (5%)Cleaning of tools: THINNER 08880Indicated film thickness, dry: 25 micron

Indicated film thickness, wet: 75 micronRecoat interval, min: 5 hours (20C)Recoat interval, max.: 48 hours (20C)

Surface condition: The surface should be stable, firm, dry and free of contaminants like dust, loosevarnish, old paint, dirt, oil and grease. The moisture content of the wood should notexceed 16%.

Safety: Handle with care. Before and during use, observe all safety labels on packaging andpaint containers, consult HEMPEL Material Safety Data Sheets and follow all local ornational safety regulations. Avoid inhalation, avoid contact with skin and eyes, and donot swallow. Take precautions against possible risks of fire or explosions as well asprotection of the environment. Apply only in well ventilated areas.

1/2




REMARKS: Do not apply under humid conditions or at temperatures below 5C.Drying data is given on the assumption that proper ventilation is provided. Apply one or morecoats to obtain the desired colour and uniform appearance. To obtain a very smooth finish, light

sandpapering between varnish coats is recommended. If maximum recoating interval is exceeded,careful sandpapering of the surface is recommended in order to ensure intercoat adhesion.

Note: HEMPEL'S PARQUET VARNISH 05250 is for professional use only.



2/2

This Product Data Sheet supersedes those previously issued.For explanations, definitions and scope, see Explanatory Notes in the HEMPEL Book.Data, specifications, directions and recommendations given in this data sheet represent only test results orexperience obtained under controlled or specially defined circumstances. Their accuracy, completeness or appro-

riateness under the actual conditions of any intended use of the Products herein must be determined exclusivelyby the Buyer and/or User.The Products are supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OFSALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in writing. The Manufacturer and Sellerdisclaim, and Buyer and/or User waive all claims involving, any liability, including but not limited to negligence,except as expressed in said GENERAL CONDITIONS for all results, injury or direct or consequential losses ordamages arising from the use of the Products as recommended above, on the overleaf or otherwise.Product data are subject to change without notice and become void five years from the date of issue.

HEMPEL'S PARQUET VARNISH 05250


8/97


Product Data Sheet

HEMPEL

HEMPEL'S EPOXY SEALER 05990BASE 05999 with CURING AGENT 95040

Description: HEMPEL'S EPOXY SEALER 05990 is a two-component polyamide cured epoxybinder/sealer for porous substrates not previously coated. Has a low viscosity andexcellent penetration properties. Also for use under epoxy/polyurethane coatingsystems.

Area of use: Interior and exterior: Foundations, floors, walls and ceilings.

Substrates: Concrete, masonry, cement rendering, gypsum boards, etc.

PHYSICAL CONSTANTS:Colours/Shade nos: Transparent/00000Finish: Flat(when penetration into substrate has taken place)Volume solids, %: 29 1Theoretical spreading rate: Not relevant (see REMARKSbelow)Flash point: 25CSpecific gravity: 0.93 kg/litreDry to touch: 10 hours (10C) 4 hours (20C) 1 hour (40C)


APPLICATION DETAILS:Mixing ratio for 05990: Base 05999 : Curing agent 95040

4 : 1 by volumeApplication method: Brush Airless spray Thinner (max.vol.): 08450 (5%) 08450 (5%)Cleaning of tools: THINNER 08450Pot life: 8 hours(20C)Recoat interval, min: 10 hours(10C) 4 hours (20C) 1 hour(40C)Recoat interval, max: None None None

Surface condition: The surface should be stable, firm, dry and free of dust, sand, loose old paint,

laitance, dirt, grease and oil.

Remarks: Use only where application and curing can proceed at temperatures above 10C.A theoretical sprading rate cannot be calculated. For practical purposes, approximately10 m/litre is indicated depending on the surface roughness, porosity of the concrete,extent of thinning and application method. The sealer is intended to saturate thesurface - any surplus to be removed, preferably when the sealer is still wet. Dryingdata is given on the assumption that proper ventilation is provided.

Note: HEMPEL'S EPOXY SEALER 05990 is for professional use only.




1/1






9/97


Product Data Sheet

HEMPEL

HEMPEL'S BINDER/SEALER 06600

Description: HEMPEL'S BINDER/SEALER 06600 is a well penetrating, clear acrylic product withwater-proofing properties for old stone and masonry. For this purpose, two coats areoften necessary.As a binder/sealer for porous substrates such as concrete, plaster and whitewashedsurfaces.For use under solvent-borne as well as water-borne coating systems.

Area of use: Interior and exterior: Walls, ceilings, partitions etc.

Substrates: Concrete, masonry, cement rendering, plaster, stone and white-washed surfaces, etc.

PHYSICAL CONSTANTS:Colours/Shade nos: Transparent/00000Finish: Glossy Volume solids, %: 20 1Theoretical spreading rate: Not relevant (see REMARKS below)Flash point: 38CSpecific gravity: 0.8 kg/litreDry to touch: 15 minutes (20C)


APPLICATION DETAILS:Application method: Brush/roller Conventional spray Airless spray Thinner (max.vol.): 08230 (50%) 08230 (50%) 08230(50%)Cleaning of tools: THINNER 08230Recoat interval, min: 30 minutes (20C)Recoat interval, max: None

Surface condition: The surface should be stable, firm, dry and free of dust, sand, loose old paint,laitance, dirt, grease and oil.

Remarks: A theoretical spreading rate cannot be calculated. For practical purposes,approximately 10 m/litre is indicated depending on the surface roughness, theporosity of the concrete, the extent of thinning and the application method. When theproduct is used as a sealer, it is intended to saturate the surface - any surplus to beremoved, preferably when the sealer is still wet.Drying data given is on the assumption that proper ventilation is provided.

Note: HEMPEL'S BINDER/SEALER 06600 is for professional use only.



1/1



by the Buyer and/or User.The Products are supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF

SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in writing. The Manufacturer and Sellerdisclaim, and Buyer and/or User waive all claims involving, any liability, including but not limited to negligence,except as expressed in said GENERAL CONDITIONS for all results, injury or direct or consequential losses ordamages arising from the use of the Products as recommended above, on the overleaf or otherwise.Product data are subject to change without notice and become void five years from the date of issue.


10/97


Product Data Sheet

HEMPEL

HEMPEL'S BINDER/SEALER 09810

Description: HEMPEL'S BINDER/SEALER 09810 is an economic water-borne acrylic binder/sealerwith good penetrating and dust binding properties.

For use under solvent-borne as well as water-borne coating systems.

Area of use: Interior and exterior: Walls, ceilings, partitions, etc.

Substrates: Concrete, masonry, cement rendering, plaster, wood, etc.

PHYSICAL CONSTANTS:Colour/Shade nos: Transparent/00000Finish: Semi-flatVolume solids, %: 27 1Theoretical spreading rate: Not relevant (see REMARKS below)Flash point: > 66CSpecific gravity: 1.0 kg/litreDry to touch: 2 hours(10C) 1 hour (20C) 30 minutes (40C)


APPLICATION DETAILS:Application method: Brush/roller Conventional spray Thinner (max. vol.): Fresh water (10%) Fresh water(5%)Cleaning of tools: Fresh waterRecoat interval, min: 4 hours(10C) 2 hours (20C) 1 hour (40C)Recoat interval, max: None None None


Remarks: Use only when application and drying can proceed at temperatures above 5C,

preferably above 10C and relative humidity below 85%.A theoretical spreading rate cannot be calculated. For practical purposes,

approximately 10 m/litre is indicated depending on the surface roughness, theporosity of the concrete, the extent of thinning and the application method. The sealeris intended to saturate the surface - any surplus to be removed, preferably when thesealer is still wet.Drying data given is on the assumption that proper ventilation is provided.

Note: HEMPEL'S BINDER/SEALER 09810 is for professional use only.



1/1






11/97


Product Data Sheet

HEMPEL

HEMPEL'S ALKYD UNDERCOAT 22460

Description: HEMPEL'S ALKYD UNDERCOAT 22460 is an alkyd intermediate coat for steel work anda primer for non-metallic surfaces.

Area of use: As aninteriorand exteriorprimer and intermediate coat in alkyd systems.

Substrates: Woodwork, timber, fibre-board, sealed masonry surfaces in dry rooms and primedsteelwork.

PHYSICAL CONSTANTS:Colours/Shade nos: White/10000Finish: FlatVolume solids, %: 55 1Theoretical spreading rate: 13.8 m/litre - 40 micron*Flash point: 38CSpecific gravity: 1.4 kg/litreDry to touch: 5 hours (20C)

*The theoretical spreading ratehas been calculated for the stated volume solids and dryfilm thickness.


substrate, and the relevant consumption factor.


APPLICATION DETAILS:Application method: Brush/roller Conventional spray Airless spray Thinner (max.vol.): 08230 or 08110 (5%) 08230(15%) 08230 (5%)Cleaning of tools: THINNER 08230 or 08110Indicated film thickness dry: 40 micronindicated film thickness wet: 75 micronRecoat interval, min: 10 hours(10C) 5 hours (20C) 3 hours(40C)Recoat interval, max: None

Surface condition: The surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt,grease and oil. It is recommended to apply HEMPEL'S ALKYD UNDERCOAT 22460prior to the specified filling procedure.

Filling: HEMPEL'S ACRYLIC FILLER 38900.

Remarks: Drying data given is on the assumption that proper ventilation is provided.Note: HEMPEL'S ALKYD UNDERCOAT 22460 is for professional use only.




1/1



by the Buyer and/or User.The Products are supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OFSALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in writing. The Manufacturer and Sellerdisclaim, and Buyer and/or User waive all claims involving, any liability, including but not limited to negligence,except as expressed in said GENERAL CONDITIONS for all results, injury or direct or consequential losses ordamages arising from the use of the Products as recommended above, on the overleaf or otherwise.Product data are subject to change without notice and become void five years from the date of issue.


12/97


Product Data Sheet

HEMPEL

HEMPEL'S CONTEX SEALER 26600

Description: HEMPEL'S CONTEX SEALER 26600 is an alkali resistant, acrylic primer/sealer.Excellent penetration and dust binding properties on mineral substrates. Especiallydeveloped for use in HEMPEL'S CONTEX anticarbonation systems.

Area of use: Exterior: Walls.

Substrates: Concrete, masonry, cement rendering, asbestos, etc.

PHYSICAL CONSTANTS:Colours/Shade nos: White/10000Finish: FlatVolume solids, %: 29 1Theoretical spreading rate: 9.7 m2/litre - 30 micron*Flash point: 41CSpecific gravity: 1.1 kg/litreDry to touch: 2 hours (10C) 1 hour (20C) 30 minutes (40C)

*The theoretical spreading rate has been calculated for application on a primed and

smooth surface. The actual rates may differ significantly as the sealer is intended to be

applied on rough and porous substrates. The actual rates will also depend on the extent

of thinning, the application method and the relevant consumption factor.


APPLICATION DETAILS:Application method: Airless spray Brush/rollerThinner (max. vol.): 08080 (15%) 08080 (15%)Nozzle orifice: .017"-.021"Nozzle pressure: 100 bar/1450 psi

(Airless spray data are indicative and subject to adjustment)

Cleaning of tools: THINNER 08080Recoat interval, min: 2 hours (10C) 1 hour (20C) 30 minutes (40C)Recoat interval, max: None


Remarks: Drying data is given on the assumption that proper ventilation is provided.Note: HEMPEL'S CONTEX SEALER 26600 is for professional use only.


ISSUED BY: HEMPEL A/S - 2660010000CR003

1/1






13/97


Product Data Sheet

HEMPEL

HEMPEL'S ACRYLIC PRIMER/SEALER 26630

Description: HEMPEL'S ACRYLIC PRIMER/SEALER 26630 is a solvent-borne alkali resistant acrylicprimer/sealer with excellent penetration and dust binding properties. For use undersolvent-borne as well as under water-borne coatings.


Substrates: Concrete, masonry, cement rendering, plaster, gypsum, wood, etc.PHYSICAL CONSTANTS:Colour/Shade nos: White/10000Finish: FlatVolume solids, %: 33 1Theoretical spreading rate 11.0 m2/litre- 30 micron*Specific gravity: 1.1 kg/litreDry to touch: 2 hours (10C) 1 hour (20C) 30 minutes (40C)Flash point: 43C

*The spreading ratehas been calculated theoretically for application onto a primed andsmooth surface. The actual rates may differ significantly as the primer/sealer is intended

to be applied to rough and porous substrates. The actual rates will also depend on theextent of thinning, the application method and the relevant consumption factor.


APPLICATION DETAILS:Application method: Brush/roller Conventional spray Thinner (max. vol.): 08080(15%) 08080(30%)Cleaning of tools: THINNER 08080Recoat interval, min: 2 hours (10C) 1 hour (20C) 30 minutes (40C)Recoat interval, max: None None None


Remarks: Drying data given is on the assumption that proper ventilation is provided.Note: HEMPEL'S ACRYLIC PRIMER/SEALER 26630 is for professional use only.


ISSUED BY: HEMPEL A/S-2663010000CS006

1/1






14/97


Product Data Sheet

HEMPEL

HEMPEL'S CONTEX PRIMER W/B 28600

Description: HEMPEL'S CONTEX PRIMER W/B 28600is an alkali resistant waterborne acrylicprimer/sealer in HEMPELS CONTEX anticarbonation system. Excellent penetration anddust binding properties on mineral substrates.

Area of use: Exterior:Walls

Substrates: Concrete, masonry, cement rendering etc.

PHYSICAL CONSTANTS:Colours/Shade nos.: White/10000Finish: FlatVolume solids, %: 26 1Theoretical spreading rate: 8.7 m2/litre - 30 micron*Flash point: > 66CSpecific gravity: 1.3 kg/litreDry to touch: 2 hours(10C) 1 hour (20C) 30 minutes(40C)

*The spreading ratehas been calculated theoretically for application onto a primed andsmooth surface. The actual rates may differ significantly as the primer/sealer is intended

to be applied to rough and porous substrates. The actual rates will also depend on theextent of thinning, the application method and the relevant consumption factor.


APPLICATION DETAILS:Application method: Airless spray Conventional spray Brush/rollerThinner (max. vol.): Fresh water (5%) Fresh water(5%) Fresh water(10%)Nozzle orifice: .021"-.023"Nozzle pressure: 150-180 bar


Cleaning of tools: Fresh waterRecoat interval, minimum: 4 hours(10C) 2 hours (20C) 1 hour (40C)

Recoat interval, maximum: None None None


Remarks: Use only where application and drying can proceed at temperatures above 5C,

preferably above 10C and relative humidity below 85%.Drying data given is on the assumption that proper ventilation is provided.

Note: HEMPEL'S CONTEX PRIMER W/B 28600 is for professional use only.




1/1

Issued: March 2002 Page 1 of 1





15/97


Product Data Sheet

HEMPEL

HEMPEL'S PRIMER/SEALER 28830

Description: HEMPEL'S PRIMER/SEALER 28830 is a pigmented water-borne primer/sealer withexcellent sealing and binding properties.


Substrates: Concrete, masonry, cement rendering, plaster, etc.

PHYSICAL CONSTANTS:Colours/Shade nos: White/10000Finish: FlatVolume solids, %: 26 1Theoretical spreading rate: 8.7 m2/litre - 30 micron*Flash point: > 66CSpecific gravity: 1.3 kg/litreDry to touch: 2 hours(10C) 1 hour (20C) 30 minutes(40C)

*The spreading ratehas been calculated theoretically for application onto a primed and

smooth surface. The actual rates may differ significantly as the primer/sealer is intendedto be applied to rough and porous substrates. The actual rates will also depend on the

extent of thinning, the application method and the relevant consumption factor.


APPLICATION DETAILS:Application method: Brush/roller Conventional spray Thinner (max. vol.): Fresh water (10%) Fresh water(5%)Cleaning of tools: Fresh waterRecoat interval, minimum: 4 hours(10C) 2 hours (20C) 1 hour (40C)Recoat interval, maximum: None None None


Remarks: Use only where application and drying can proceed at temperatures above 5C,preferably above 10C and relative humidity below 85%.Drying data given is on the assumption that proper ventilation is provided.

Note: HEMPEL'S PRIMER/SEALER 28830 is for professional use only.



1/1






16/97


Product Data Sheet

HEMPEL

HEMPEL'S EPOXY FILLER 35230

BASE 35239 with CURING AGENT 95130

Description: HEMPEL'S EPOXY FILLER 35230 is a two-component, high solid epoxy filler. It is a veryhard, impact and chemical resistant material when cured. It can be applied in a dry filmthickness of up to 10 mm without cracking. The product is easy to work with and hasexcellent filling properties. Can be recoated with solvent-borne primers/sealers and isthe preferred filler for epoxy and polyurethane systems.

Area of use: As a repair filler or levelling compound for interiorand exteriorareas.

Substrates: Concrete, steel and other rigid materials.

PHYSICAL CONSTANTS:Colours/Shade nos: Off-white/11630Finish: FlatVolume solids, %: 98 1

Flash point: 25CSpecific gravity: 2.0 kg/litreDry to touch: 3 hours(20C)Ready to sand: 16 hours (20C)



3 : 1 by volumeApplication method: Spatula, broad knife, steel trowelThinner (max. vol.): Do not dilute (when used as skimcoat, 5% THINNER 08450 is recommended)Pot life: 2 hours (20C)Cleaning of tools: TOOL CLEANER 99610 or THINNER 08450Recoat interval, min: 24 hours (20C)

Recoat interval, max: 30 days (20C) (see REMARKS below)

Surface condition: The surface should be stable, firm, dry and free of dust, sand, loose old paint,laitance, dirt, grease and oil. It is recommended to apply an epoxy primer/sealer priorto the specified filling procedure.

Remarks: Use only where application and curing can proceed at temperatures above 5C.The dry film thickness will be determined by the depth of crevices, blow-holes or thedegree of surface irregularities. The practical spreading rate will alter accordingly.If the maximum recoating interval is exceeded, roughening of the surface is necessary.

Note: HEMPEL'S EPOXY FILLER 35230 is for professional use only.

Safety: Handle with care. Before and during use, observe all safety labels on packaging andpaint containers, consult HEMPEL Material Safety Data Sheets and follow all local or

national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and donot swallow. Take precautions against possible risks of fire or explosions as well asprotection of the environment. Apply only in well ventilated areas.


1/1






17/97


Product Data Sheet

HEMPEL

HEMPEL'S FILLER 36610

Description: HEMPEL'S FILLER 36610 is an acrylic-based filler, thixotropic in appearance andcontent. It is a knifing filler which is smooth and easy to apply. The high solidscontent ensures excellent workability, smoothing and filling properties. Accepts a widerange of solvent and water-borne topcoats.

Area of use: Interiorandexterior.

Substrates: Concrete, cement rendering, masonry, gypsum boards and wood.

PHYSICAL CONSTANTS:Colours/Shade nos: Off-white/11630Finish: FlatVolume solids, %: 57 1Theoretical spreading rate: 1.9 m/litre - 300 micron (when used as a skim coat) (see REMARKS below)Specific gravity: 1.7 kg/litreFlash point: 23CDry to touch: 6 hours (10C) 3 hours (20C) 1 hours (40C)Dry to handle: 12 hours (10C) 6 hours (20C) 3 hours (40C)Ready to sand: 48 hours(10C) 24 hours(20C) 12 hours(40C)


APPLICATION DETAILS:Application method: Spatula, filling knife, steel trowelCleaning of tools: THINNER 08080Indicated film thickness, dry: 300 micronIndicated film thickness, wet: 550 micronRecoat interval, min: 8 hours (10C) 4 hours (20C) 2 hours (40C)Recoat interval, max: None None None

Surface condition: The surface should be stable, firm, dry and free of dust, sand, loose old paint,laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the

specified filling procedure. Touch-up with primer/sealer on areas repaired with filler canbe done prior to application of topcoats.Remarks: The dry film thickness will be determined by the depth of the crevices, blowholes or the

degree of surface irregularities.The practical spreading rate will be altered accordingly.Drying data is given on the assumption that proper ventilation is provided.

Note: HEMPEL'S FILLER 36610 is for professional use only.



1/1






18/97


Product Data Sheet

HEMPEL

HEMPEL'S INTERIOR FILLER 38820

Description: HEMPEL'S INTERIOR FILLER 38820 is a water-borne, acrylic-based filler with goodsmoothing properties. Recoatable with water-borne or solvent-borne coatings.

Area of use: Interior; Dry rooms: Walls, ceilings, partitions, etc.


PHYSICAL CONSTANTS:Colours/Shade nos: Off-white/11630Finish: FlatVolume solids, %: 49 1Theoretical spreading rate: 2.0 m/litre - 250 micron (when used as a skim coat) (see REMARKS below)Flash point: > 66CSpecific gravity: 1.7 kg/litreDry to touch: 8 hours (10C) 4 hours (20C) 2 hours (40C)Ready to sand: 48 hours(10C) 24 hours (20C) 12 hours(40C)

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are

subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

APPLICATION DETAILS:Application method: Spatula, filling knife, steel trowelCleaning of tools: Fresh waterIndicated film thickness, dry: 250 micronIndicated film thickness, wet: 500 micronRecoat interval, min: 12 hours(10C) 6 hours (20C) 3 hours(40C)Recoat interval, max: None None None

Surface condition: The surface should be stable, firm, dry and free of dust, sand, loose old paint,laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to thespecified filling procedure. Touch-up with primer/sealer on areas repaired with filler isrecommended prior to application of topcoats.

Remarks: Use only where application and drying can proceed at temperatures above 5C andrelative humidity below 85%.Not recommended in rooms with high humidity such as bathrooms, kitchens, etc.The dry film thickness will be determined by the depth of crevices, blow-holes or thedegree of surface irregularities. The practical spreading rate will alter accordingly.HEMPEL'S INTERIOR FILLER 38820 is not recommended for deep filling. Avoid applyingat excessive film thickness.Drying data given is on the assumption that proper ventilation is provided.

Note: HEMPEL'S INTERIOR FILLER 38820 is for professional use only.




1/1






19/97


Product Data Sheet

HEMPEL

HEMPEL'S EXTERIOR FILLER 38830

Description: HEMPEL'S EXTERIOR FILLER 38830 is a water-borne, acrylic-based filler with excellentsmoothing and filling properties. Can be topcoated with water-borne or solvent-bornesystems.


Substrates: Concrete, masonry, cement rendering, plaster, gypsum boards, etc.

PHYSICAL CONSTANTS:Colours/Shade nos: Off-white/11630Finish: FlatVolume solids, %: 49 1Theoretical spreading rate: 2.0 m/litre - 250 micron (when used as a skim coat) (see REMARKS below)Flash point: > 66CSpecific gravity: 1.7 kg/litreDry to touch: 8 hours (10C) 4 hours (20C) 2 hours (40C)Ready to sand: 48 hours(10C) 24 hours(20C) 12 hours (40C)


APPLICATION DETAILS:Application method: Spatula, filling knife, steel trowelCleaning of tools: Fresh waterIndicated film thickness, dry: 250 micronIndicated film thickness, wet: 500 micronRecoat interval, min: 12 hours(10C) 6 hours (20C) 3 hours(40C)Recoat interval, max: None None None

Surface condition: The surface should be stable, firm, dry and free of dust, sand, loose old paint,laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to thespecified filling procedure. Touch-up with primer/sealer on areas repaired with filler isrecommended prior to application of topcoats.

Remarks: Use only where application and drying can proceed at temperatures above 5C,preferably above 10C and relative humidity below 85%.The dry film thickness will be determined by the depth of crevices, blow-holes or thedegree of surface irregularities.The practical spreading rate will alter accordingly.Drying data given is on the assumption that proper ventilation is provided.

Note: HEMPEL'S EXTERIOR FILLER 38830 is for professional use only.



1/1






20/97


Product Data Sheet

HEMPEL

HEMPEL'S SPATTER FINISH 38860

Description: HEMPEL'S SPATTER FINISH 38860 is a water-borne emulsion coating.The product has non-drip properties. The final appearance is determined by theapplication method. Different patterns can be obtained by using different applicationtools. Overcoating with solvent-borne or water-borne coatings is recommended toobtain best possible finish and washability.


Substrates: Concrete, cement rendering, plaster, gypsum boards, etc.

PHYSICAL CONSTANTS:Colours/Shade nos: White/10000Finish: FlatVolume solids, %: 51 1Theoretical spreading rate: 2.0 m/litre - 250 micron*Flash point: > 66CSpecific gravity: 1.7 kg/litreDry to touch: 8 hours (10C) 4 hours(20C) 2 hours (40C)

*The theoretical spreading rate has been calculated for the stated volume solids and dryfilm thickness.

A practical spreading rate will depend on the actual dry film thickness, the nature of thesubstrate, and the relevant consumption factor.


APPLICATION DETAILS:Application method: Conventional spray Hopper gun Air-mix spray Thinner (max. vol.): None None NoneCleaning of tools: Fresh waterRecoat interval, min: 12 hours (10C) 6 hours(20C) 3 hours (40C)Recoat interval, max: None None None

Surface condition: The surface should be stable, firm, dry and free of dust, sand, loose old paint,

laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to thespecified filling procedure. Touch-up with primer/sealer on areas repaired with filler isrecommended prior to application of topcoats.

Sealing: Transparent: HEMPEL'S BINDER/SEALER 09810Opaque: HEMPEL'S ACRYLIC PRIMER/SEALER 26630

Remarks: Use only where applicaton and drying can proceed at temperatures above 5C,preferably above 10C and relative humidity below 85%.Other primers or subsequent coats may be specified.Drying data given is on the assumption that proper ventilation is provided.

Note: HEMPEL'S SPATTER FINISH 38860 is for professional use only.

Safety: Handle with care. Before and during use, observe all safety labels on packaging and

paint containers, consult HEMPEL Material Safety Data Sheets and follow all local ornational safety regulations. Avoid inhalation, avoid contact with skin and eyes, and donot swallow. Take precautions against possible risks of fire or explosions as well asprotection of the environment. Apply only in well ventilated areas.


1/1



by the Buyer and/or User.The Products are supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF

SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in writing. The Manufacturer and Sellerdisclaim, and Buyer and/or User waive all claims involving, any liability, including but not limited to negligence,except as expressed in said GENERAL CONDITIONS for all results, injury or direct or consequential losses ordamages arising from the use of the Products as recommended above, on the overleaf or otherwise.Product data are subject to change without notice and become void five years from the date of issue.


21/97


Product Data Sheet

HEMPEL

HEMPEL'S ACRYLIC FILLER 38900

Description: HEMPEL'S ACRYLIC FILLER 38900 is a high-grade, flexible water-borne acrylic filler. Thehigh solids content ensures excellent workability, smoothing and fil ling properties. Idealfor filling joints in gypsum boards. Can be used as a repair filler or for full skim-coatapplication. HEMPEL'S ACRYLIC FILLER 38900 can be overcoated with solvent-borne orwater-borne coatings without use of a primer/sealer.


Substrates: Concrete, masonry, gypsum boards, plaster, asbestos, wood, etc.

PHYSICAL CONSTANTS:Colours/Shade nos: Off-white/11630Finish: FlatVolume solids, %: 57 1Theoretical spreading rate: 1.9 m/litre - 300 micron(when applied as a skim coat)*Flash point: > 66CSpecific gravity: 1.8 kg/litreDry to touch: 8 hours (10C) 4 hours(20C) 2 hours(40C)Ready to sand: 48 hours(20C) 24 hours(20C) 12 hours(40C)

*The theoretical spreading rate has been calculated for the stated volume solids and dry

film thickness.




APPLICATION DETAILS:Application method: Spatula, filling knife, steel trowelCleaning of tools: Fresh waterIndicated film thickness, dry: 300 micronIndicated film thickness, wet: 525 micron

Recoat interval, min: 12 hours(10C) 6 hours(20C) 3 hours(40C)Recoat interval, max: None None None

Surface condition: The surface should be stable, firm, dry and free of dust, sand, loose old paint,laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to thespecified filling procedure.

Remarks: Use only where applicaton and drying can proceed at temperatures above 5C,preferably above 10C and relative humidity below 85%.Drying data given is on the assumption that proper ventilation is provided.

Note: HEMPEL'S ACRYLIC FILLER 38900 is for professional use only.

Safety: Handle with care. Before and during use, observe all safety labels on packaging andpaint containers, consult HEMPEL Material Safety Data Sheets and follow all local or

national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and donot swallow. Take precautions against possible risks of fire or explosions as well asprotection of the environment. Apply only in well ventilated areas.


1/1






22/97


Product Data Sheet

HEMPEL

HEMPEL'S EPOXY TEXTURE 45450

BASE 45459 with CURING AGENT 95210

Description: HEMPEL'S EPOXY TEXTURE 45450 is a two-component, high-solids epoxy product,which is specially formulated to be applied by spray to obtain a textured surface withdifferent patterns. When topcoated with polyurethane finishes, a high-grade system,suitable for outdoor exposure is obtained.

Area of use: Interior and exterior: Ceilings and walls.

Substrates: Concrete, masonry, cement rendering, plaster, etc.

PHYSICAL CONSTANTS:Colours/Shade nos: White/10000Finish: FlatVolume solids, %: 60 1Theoretical spreading rate: 6.0 m/litre - 100 micron*Flash point: 12CSpecific gravity: 1.5 kg/litreDry to touch: 2 hours (10C) 1 hour (20C) 30 minutes (40C)

*The theoretical spreading ratehas been calculated for the stated volume solids and dry

film thickness.





9 : 1 by volumeApplication method: Hopper gun Airless spray Thinner (max. vol.): 08450(5%) 08450 (5%)

Cleaning of tools: THINNER 08450Pot life: 6 hours (10C) 3 hours (20C)Recoat interval, min: 2 hours (10C) 1 hour (20C) 30 minutes (40C)Recoat interval, max: None None None


1/2



23/97


24/97


Product Data Sheet

HEMPEL

HEMPEL'S CONTEXSMOOTH 46600

Description: HEMPEL'S CONTEX SMOOTH 46600 is an alkali resistant, acrylic topcoat in HEMPEL'SCONTEX anticarbonation system. The product is water-repellent, but allows watervapour from the substrate to pass through the paint film. Has a smooth flat finish.



PHYSICAL CONSTANTS:Colours/Shade nos: White/10000 or according to HEMPEL's colour cardFinish: FlatVolume solids, %: 36 1Theoretical spreading rate: 7.2 m2/litre - 50 micron*Flash point: 23CSpecific gravity: 1.3 kg/litreDry to touch: 2 hours (20C)


dry film thickness.




APPLICATION DETAILS:Application method: Airless spray Brush/rollerThinner (max. vol.): 08080 (5%) 08080 (5%)Nozzle orifice: .025"-.027"Nozzle pressure: 100 bar/1450 psi


Cleaning of tools: THINNER 08080Indicated film thickness, dry: 50 micron

Indicated film thickness, wet: 125 micronRecoat interval, min: 2 hours (20C)Recoat interval, max: None


1/2




SURFACE The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt,CONDITION: grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure.

Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of

topcoats.

FILLING: HEMPEL'S FILLER 36610.

SEALING: HEMPEL'S CONTEX SEALER 26600 or HEMPEL'S ACRYLIC PRIMER/SEALER 26630.

REMARKS: Drying data is given on the assumption that proper ventilation is provided. To obtain the bestresult, follow HEMPEL's recommended painting specifications for HEMPEL'S CONTEXanticarbonation system. Please also see HEMPEL'S product information for HEMPEL'S CONTEX46600.

Note: HEMPEL'S CONTEX SMOOTH 46600 is for professional use only.



2/2



HEMPEL'S CONTEX SMOOTH 46600


26/97


Product Data Sheet

HEMPEL

HEMPEL'S CONTEXSMOOTH W/B 48600

Description: HEMPEL'S CONTEX SMOOTH W/B 48600 is a waterborne alkali resistant, acrylictopcoat in HEMPEL'S CONTEX anticarbonation system. The product is water-repellent,but allows water vapour from the substrate to pass through the paint film. May also beused as a roof coating on terraces and roofs with only sporadic and light traffic. Theproduct has a smooth and flat finish.



PHYSICAL CONSTANTS:Colours/Shade nos: White/10000 or according to HEMPEL's colour cardFinish: FlatVolume solids, %: 47 1Theoretical spreading rate: 6.3 m2/litre - 75 micron*Flash point: >66CSpecific gravity: 1.3 kg/litreDry to touch: 4 hours/10C 2 hours (20C) 1 hour (40C)


dry film thickness.




APPLICATION DETAILS:Application method: Airless spray Brush/rollerThinner (max. vol.): Fresh water (5%) Fresh water (5%)Nozzle orifice: .023"-.025"Nozzle pressure: 150-180 bar


Cleaning of tools: Fresh waterIndicated film thickness, dry: 75 micronIndicated film thickness, wet: 150 micronRecoat interval, min: 12 hours (10C) 6 hours (20C) 3 hours (40C)Recoat interval, maximum: None None None


1/2




SURFACE The surface should be stable, firm, dry and free of dust, sand, loose old paint,CONDITION: laitance, dirt, grease and oil.

FILLING: HEMPEL'S EXTERIOR FILLER 38830 or HEMPEL'S ACRYLIC FILLER 38900.

SEALING: HEMPEL'S CONTEX PRIMER W/B 28600.

REMARKS: Use only where application and drying can proceed at temperatures above 5C,preferably above 10C, and relative humidity below 85%. Drying data is given on theassumption that proper ventilation is provided.To obtain the best result, follow HEMPEL's recommended painting specifications forHEMPEL'S CONTEX anticarbonation system.

Note: HEMPEL'S CONTEX SMOOTH W/B 48600 is for professional use only.



2/2



HEMPEL'S CONTEX SMOOTH W/B 48600


28/97


Product Data Sheet

HEMPEL

HEMPEL'S SMOOTH TEXTURE 48740

Description: HEMPEL'S SMOOTH TEXTURE 48740 is a high-build, water-borne coating. The producthas non-drip properties and different patterns can be obtained by combining differentapplication tools. Must be recoated to obtain desired colour and gloss.



PHYSICAL CONSTANTS:Colours/Shade nos: Off-white/11630Finish: FlatVolume solids, %: 54 1Theoretical spreading rate: 3.7 m/litre - 150 micron*Flash point: > 66CSpecific gravity: 1.6 kg/litreDry to touch: 2 hours (20C)

*The theoretical spreading rate has been calculated for the stated volume solids and dryfilm thickness.

A practical spreading rate will depend on the actual dry film thickness, the nature of thesubstrate, and the relevant consumption factor.


APPLICAT

hempel book deco

Documents