hazardous materials training by herring feti
TRANSCRIPT
![Page 1: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/1.jpg)
Welcometo Hazardous Materials
Technician - Part 1
![Page 2: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/2.jpg)
General
• Without reference determine general principles of the Hazardous Materials Technician with at least 80% accuracy.
![Page 3: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/3.jpg)
INTRODUCTION
• Hazardous materials technicians shall be trained to meet all competencies at the first responder awareness and operational levels and the competencies of this chapter. Hazardous materials technicians also shall receive any additional training to meet applicable … appropriate state, local, or provincial occupational health and safety regulatory requirements.
![Page 4: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/4.jpg)
DEFINITIONS
• Hazardous materials technicians are those persons who respond to releases or potential releases of hazardous materials for the purpose of controlling the release.
• Hazardous materials technicians are expected to use specialized chemical protective clothing and specialized control equipment.
![Page 5: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/5.jpg)
GOAL
• The goal of this chapter shall be to provide the hazardous materials technician with the knowledge and skills to perform the following tasks safely. Therefore, in addition to being competent at both the first responder awareness and operational levels, the hazardous materials technician shall be able to:
![Page 6: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/6.jpg)
GOALS
– Analyze– Plan– Implement– Evaluate
![Page 7: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/7.jpg)
Analyzing the Incident
• Given scenarios of facility and transportation hazardous materials incidents, identify the principles for analyzing a hazardous materials incident at the technician level with at least 80% accuracy.
![Page 8: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/8.jpg)
Chemical Terms & Their Significancein the Risk Assessment Process
• Describe the following terms and explain their significance in the risk assessment process.– Acid, caustic– Air reactivity– Biological agents and toxins– Boiling point
![Page 9: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/9.jpg)
Chemical Terms & Their Significancein the Risk Assessment Process
– Catalyst– Chemical interactions– Chemical reactivity– Compound, mixture– Concentration– Corrosivity– Critical temperature and pressure
![Page 10: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/10.jpg)
Chemical Terms & Their Significancein the Risk Assessment Process
– Expansion ration – Flammable range (LEL & UEL)– Fire point– Flash point– Halogenated hydrocarbon– Ignition (auto-ignition) temperature– Inhibitor– Instability
![Page 11: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/11.jpg)
Chemical Terms & Their Significancein the Risk Assessment Process
– Ionic and covalent compounds– Irritants (riot control agents)– Maximum safe storage temperature
(MSST)– Melting point/Freezing point– Miscibility– Nerve agents– Organic and inorganic
![Page 12: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/12.jpg)
Chemical Terms & Their Significancein the Risk Assessment Process
– Oxidation potential– pH – Physical state – Polymerization– Radioactivity– Saturated, unsaturated, and aromatic
hydrocarbons– Self-accelerating decomposition temperature
![Page 13: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/13.jpg)
Chemical Terms & Their Significancein the Risk Assessment Process
– Solution, slurry– Specific gravity– Strength– Sublimation– Temperature of product– Toxic products of combustion
![Page 14: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/14.jpg)
Chemical Terms & Their Significancein the Risk Assessment Process
– Vapor density– Vapor pressure– Vesicants (blister agents)– Viscosity– Volatility– Water reactivity– Water solubility
![Page 15: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/15.jpg)
Toxicological Terms & Exposure Values & Their Significance in the Risk
Assessment Process
• Describe the following toxicological terms and exposure values and explain their significance in the risk assessment process:– Parts per million (ppm)– Parts per billion (ppb)– Lethal dose (LD 50)– Lethal concentration (LC 50)
![Page 16: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/16.jpg)
Toxicological Terms & Exposure Values& Their Significance in the Risk
Assessment Process
– Permissible exposure limit (PEL)– Threshold limit value time weighted
average (TLV-TWA)– Threshold limit value short-term exposure
limit (TWA-STEL)– Threshold limit value ceiling (TLV-C)– Immediately dangerous to life and health
value (IDLH)
![Page 17: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/17.jpg)
Radiological Terms & Their Significance in the Risk Assessment Process
• Describe the following radiological terms and explain their significance in predicting the extent of health hazards and environmental impact in a hazardous materials incident:– Alpha– Beta– Gamma
![Page 18: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/18.jpg)
Radiological Terms & Their Significance in the Risk Assessment Process
– Activity– Quantity gamma– Absorbed dose– Half-life– Inverse square law– Time, Distance, and Shielding
![Page 19: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/19.jpg)
TECHNICIAN PERFORMANCE TEST
• Given examples of various hazardous materials facility and transportation containers, identify each container by type and identify at least one material and its hazard class within 60 minutes IAW DOD Instruction & DOD Manual 6055.6.
![Page 20: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/20.jpg)
TECHNICIAN PERFORMANCE TEST
• Given examples of various hazardous materials facility and transportation containers and the appropriate reference guide, identify the capacity and basic design and construction features, including closures, for each container within 60 minutes IAW DOD Instruction & DOD Manual 6055.6.
![Page 21: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/21.jpg)
Container Capacities
• Given three examples of facility and transportation containers, identify the approximate capacity of each container.
NOTE: This information may be presented when each container is taught.
![Page 22: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/22.jpg)
Container Capacities
• Using markings on the container, identify the capacity (by weight and/or volume) of the following examples of transportation vehicles.
NOTE: This information may be presented when each container is taught.
![Page 23: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/23.jpg)
Basic Design and Construction Features, Including Closures
• Identify the basic design and construction features, including closures, of the following bulk containers.
NOTE: This information may be presented when each container is taught.
![Page 24: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/24.jpg)
Non-bulk Container Materials & Hazard Classes
• Given examples of the following non-bulk containers, identify at least one material, and its hazard class, that is typically found in each container
NOTE: This information may be presented when each container is taught.
![Page 25: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/25.jpg)
Railroad Tank Car Identification
• Given examples of the following railroad cars, identify each car by type and identify at least one material, and its hazard class, that is typically found in each car.
![Page 26: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/26.jpg)
• Cryogenic liquid tank cars– Type– Material/Hazard Class– Capacity & Markings– Design/Construction– Closures
Railroad Tank Car Identification
![Page 27: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/27.jpg)
![Page 28: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/28.jpg)
![Page 29: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/29.jpg)
• High-pressure tube cars– Type– Material/Hazard Class– Capacity & Markings– Design/Construction– Closures
Railroad Tank Car Identification
![Page 30: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/30.jpg)
![Page 31: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/31.jpg)
• Nonpressure tank cars– Type– Material/Hazard Class– Capacity & Markings– Design/Construction– Closures
Railroad Tank Car Identification
![Page 32: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/32.jpg)
![Page 33: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/33.jpg)
• Pneumatically unloaded hopper cars– Type– Material/Hazard Class– Capacity & Markings– Design/Construction– Closures
Railroad Tank Car Identification
![Page 34: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/34.jpg)
• Pressure tank cars– Type– Material/Hazard Class– Capacity & Markings– Design/Construction– Closures
Railroad Tank Car Identification
![Page 35: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/35.jpg)
![Page 36: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/36.jpg)
Intermodal Tank Identification
• Given examples of the following intermodal tanks, identify each intermodal tank by type and identify at least one material, and its hazard class, that is typically found in each tank.
![Page 37: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/37.jpg)
• Intermediate bulk containers– Type– Material/Hazard class– Design/Construction– Closures– Capacities & Markings
Intermodal Tank Identification
![Page 38: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/38.jpg)
Nonpressure Intermodal Tanks
• IM-101 (IMO Type 1 internationally) portable tank.– Type– Material/Hazard class– Capacity & Markings– Design/Construction – Closures
![Page 39: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/39.jpg)
Non-Pressure intermodal tank
![Page 40: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/40.jpg)
Nonpressure Intermodal Tanks
• IM-102 (IMO Type 2 internationally) portable tank.– Type– Material/Hazard class– Capacity & Markings– Design/Construction – Closures
![Page 41: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/41.jpg)
![Page 42: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/42.jpg)
Pressure Intermodal Tanks
• DOT 51 or IMO Type 5– Type– Material/Hazard class– Capacity & Markings– Design/Construction – Closures
![Page 43: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/43.jpg)
![Page 44: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/44.jpg)
Specialized Intermodal Tanks
• Cryogenic intermodal tanks (IMO Type 7).– Type– Material/Hazard class– Capacity & Markings– Design/Construction – Closures
![Page 45: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/45.jpg)
![Page 46: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/46.jpg)
Specialized Intermodal Tanks
• Tube module.– Type– Material/Hazard class– Capacity & Markings– Design/Construction – Closures
![Page 47: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/47.jpg)
![Page 48: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/48.jpg)
Cargo Tank Identification
• Given examples of the following cargo tanks, identify at least one material, and its hazard class, that is typically found in each tank.
![Page 49: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/49.jpg)
• Dry bulk cargo tanks– Type– Material/Hazard class– Capacity & Markings– Design/Construction– Closures
Cargo Tank Identification
![Page 50: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/50.jpg)
Dry bulk cargo tank
![Page 51: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/51.jpg)
![Page 52: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/52.jpg)
• MC-306/DOT-406 cargo tanks– Type– Material/Hazard class– Capacity & Markings– Design/Construction– Closures
Cargo Tank Identification
![Page 53: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/53.jpg)
MC-306 cargo tank
![Page 54: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/54.jpg)
MC-406 cargo tank
![Page 55: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/55.jpg)
![Page 56: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/56.jpg)
• MC-307/DOT-407 cargo tanks– Type– Material/Hazard class– Capacity & Markings– Design/Construction– Closures
Cargo Tank Identification
![Page 57: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/57.jpg)
MC-307 cargo tank
![Page 58: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/58.jpg)
MC-407 cargo tank
![Page 59: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/59.jpg)
• MC-312/DOT-412 cargo tanks– Type– Material/Hazard class– Capacity & Markings– Design/Construction– Closures
Cargo Tank Identification
![Page 60: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/60.jpg)
MC-312 cargo tank
![Page 61: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/61.jpg)
MC-412 cargo tank
![Page 62: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/62.jpg)
![Page 63: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/63.jpg)
• MC-331 cargo tanks– Type– Material/Hazard class– Capacity & Markings– Design/Construction– Closures
Cargo Tank Identification
![Page 64: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/64.jpg)
MC-331 cargo tank
![Page 65: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/65.jpg)
![Page 66: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/66.jpg)
• MC-338 cargo tanks– Type– Material/Hazard class– Capacity & Markings– Design/Construction– Closures
Cargo Tank Identification
![Page 67: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/67.jpg)
MC-338 cargo tank
![Page 68: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/68.jpg)
Facility Tank Identification
• Given examples of the following facility tanks, identify at least one material, and its hazard class, that is typically found in each tank.
![Page 69: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/69.jpg)
Facility Tank Identification
• Non-pressure tanks– Type– Material/Hazard class– Capacity & Markings– Design/construction– Closures
![Page 70: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/70.jpg)
Non-pressure facility tanks
![Page 71: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/71.jpg)
![Page 72: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/72.jpg)
![Page 73: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/73.jpg)
![Page 74: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/74.jpg)
![Page 75: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/75.jpg)
Facility Tank Identification
• Pressure tanks– Type– Material/Hazard class– Capacity & Markings– Design/construction– Closures
![Page 76: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/76.jpg)
Low-pressure & pressure vessels
![Page 77: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/77.jpg)
![Page 78: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/78.jpg)
![Page 79: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/79.jpg)
Facility Tank Identification
• Cryogenic tanks– Type– Material/Hazard class– Capacity & Markings– Design/construction– Closures
![Page 80: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/80.jpg)
![Page 81: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/81.jpg)
Non-bulk Tank Identification
• One ton containers– Type– Material/Hazard class– Capacity & Markings– Design/construction– Closures
![Page 82: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/82.jpg)
![Page 83: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/83.jpg)
![Page 84: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/84.jpg)
Pipelines
• Pipelines– Type– Material/Hazard class– Capacity & Markings– Design/construction– Closures
![Page 85: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/85.jpg)
![Page 86: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/86.jpg)
• Bags– Type– Material/Hazard class– Design/Construction– Closures– Capacities & Markings
Non-bulk Containers
![Page 87: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/87.jpg)
Bags (nonbulk)
![Page 88: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/88.jpg)
![Page 89: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/89.jpg)
• Carboys– Type– Material/Hazard class– Design/Construction– Closures– Capacities & Markings
Non-bulk Containers
![Page 90: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/90.jpg)
Carboys (non-bulk)
![Page 91: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/91.jpg)
![Page 92: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/92.jpg)
• Cylinders– Type– Material/Hazard class– Design/Construction– Closures– Capacities & Markings
Non-bulk Containers
![Page 93: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/93.jpg)
Cylinders
![Page 94: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/94.jpg)
![Page 95: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/95.jpg)
• Drums– Type– Material/Hazard class– Design/Construction– Closures– Capacities & Markings
Non-bulk Containers
![Page 96: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/96.jpg)
Drums
![Page 97: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/97.jpg)
![Page 98: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/98.jpg)
Container Capacities
• Given three examples of facility and transportation containers, identify the approximate capacity of each container.
NOTE: This information may have been presented when each container was taught.
![Page 99: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/99.jpg)
Container Capacities
• Given examples of transportation vehicles using the markings on the container, identify the capacity (by weight and/or volume).
NOTE: This information may have been presented when each container was taught.
![Page 100: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/100.jpg)
Basic Design and Construction Features, Including Closures
• Identify the basic design and construction features, including closures, for bulk containers.
NOTE: This information may have been presented when each container was taught.
![Page 101: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/101.jpg)
Non-bulk Container Material & Hazard Classes
• Given examples of the following non-bulk containers, identify at least one material, and its hazard class, that is typically found in each container
NOTE: This information may have been presented when each container was taught.
![Page 102: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/102.jpg)
Radioactive Material Packages
• Given examples of the following radioactive materials packages, identify each package by type and identify at least one typical material found in each package.
![Page 103: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/103.jpg)
Radioactive Material Packages
• Identify basic design and construction features of the following radioactive materials containers
![Page 104: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/104.jpg)
• Type A– Type– Material/Hazard class– Design/Construction– Closures
Radioactive Material Packages
![Page 105: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/105.jpg)
• Type B– Type– Material/Hazard class– Design/Construction– Closures
Radioactive Material Packages
![Page 106: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/106.jpg)
![Page 107: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/107.jpg)
Radioactive Labels
• Given a label for a radioactive material, identify vertical bars, contents, activity, and transport index, then describe the labeled item and its significance in surveying a radioactive materials incident.
![Page 108: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/108.jpg)
Detecting Weapons of Mass Destruction (WMD) Agents
• For each of the following, describe a method that can be used to detect them.– Nerve agents– Vesicants (Blister agents)– Biological agents and toxins– Irritants (riot control agents
![Page 109: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/109.jpg)
Classifying by Hazard(s) Unknown Materials
• Given at least three unknown materials, one of which is a solid, one a liquid, and one a gas, identify or classify by hazard each unknown material.
![Page 110: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/110.jpg)
Analysis Process Steps for Unknown Materials
• Identify the steps in an analysis process for identifying unknown solid and liquid materials.– Wear appropriate protective clothing– Approach cautiously from uphill and upwind– Measure in this order or simultaneously;
1 Radioactive 5 Hydrogen Sulfide2 Combustibility 6 Carbon Monoxide3 Oxygen Availability (deficiency) 7Organic Vapor4 pH
![Page 111: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/111.jpg)
Analysis Process Steps for Unknown Materials
• Identify the steps in an analysis process for identifying an unknown atmosphere.– Wear appropriate protective clothing– Approach cautiously from uphill and upwind– Measure in this order or simultaneously;
1 Radioactive 5 Hydrogen Sulfide2 Combustibility 6 Carbon Monoxide3 Oxygen Availability (deficiency) 7Organic Vapor4 pH
![Page 112: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/112.jpg)
Identifying Monitoring EquipmentUsed to Determine Hazards
• Identify the type(s) of monitoring equipment, test strips, and reagents used to determine the following hazards.
![Page 113: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/113.jpg)
Identifying Monitoring EquipmentUsed to Determine Hazards
– Corrosivity, pH– Flammability– Oxidation potential– Oxygen deficiency– Radioactivity– Toxic levels
![Page 114: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/114.jpg)
Capabilities and Limiting Factors Associated With the Selection and Use of Monitoring
Equipment
• Identify the capabilities and limiting factors associated with the selection and use of the following monitoring equipment, test strips, and reagents.
![Page 115: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/115.jpg)
– Carbon monoxide meters– Colorimetric tubes– Combustible gas indicator– Oxygen meters– Passive dosimeters
Capabilities and Limiting Factors Associated With the Selection and Use of
Monitoring Equipment
![Page 116: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/116.jpg)
– Photo-ionization detectors– pH indicators and/or pH meters– Radiation detection instruments– Reagents– Test strips
Capabilities and Limiting Factors Associated With the Selection and Use
of Monitoring Equipment
![Page 117: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/117.jpg)
• Given monitoring equipment and three unknown materials demonstrate field maintenance and testing of the monitors, select the appropriate monitors, and classify, identify, and quantify three unknown materials within 60 minutes IAW DoD Instruction 6055.6 & DoD Manual 6055.6.
Monitoring & Detection Equipment
![Page 118: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/118.jpg)
• Given various hazardous materials scenarios and necessary materials, collect hazard, response, and exposure information not available from the North American Emergency Response Guidebook or MSDS within 60 minutes IAW DoD Instruction 6055.6 & DoD Manual 6055.6.
Collecting & Interpreting Hazard & Response Information
![Page 119: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/119.jpg)
Collecting & Interpreting Hazard & Response Information
• Identify and interpret the types of hazard and response information available from each of the following resources and explain the advantages and disadvantages of each resource.
![Page 120: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/120.jpg)
Collecting & Interpreting Hazard & Response Information
– Hazardous materials data bases– Maps and diagrams– Monitoring equipment– Reference manuals– Technical information centers– Technical information specialists
![Page 121: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/121.jpg)
Heat Transfer Process with Cryogenic Liquids
• Describe the heat transfer processes that occur as a result of a cryogenic liquid spill.– Rapid Vaporization– Expansion Ratios
![Page 122: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/122.jpg)
Signs, Symptoms and Target Organ Effects of Exposure to Hazardous Materials
• Given five hazardous material scenarios and the appropriate reference materials, identify the signs and symptoms of exposure to each material and the target organ effects of exposure to that material.
![Page 123: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/123.jpg)
• Given examples of domestic gas line breaks and the locations of combustible gas indicator readings, plot the readings and work zones using EPA guidelines, within 30 minutes IAW DoD Instruction 6055.6 & DoD Manual 6055.6.
Domestic Gas Line Breaks/Leaks
![Page 124: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/124.jpg)
Domestic Gas Line Breaks/Leaks
• Given a scenario of a domestic gas line break and the readings from a combustible gas indicator, determine the area of evacuation.
![Page 125: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/125.jpg)
Determining Pressure in Bulk & Facility Containers
• Identify two methods for determining the pressure in bulk packaging or facility containers.– Pressure Gauges– Temperature of Contents– Pop-off or Safety Vent release pressures– Test or Maximum Allowable Working
Pressures (MAWP) printed on container
![Page 126: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/126.jpg)
Amount of Lading Remaining in Damaged Bulk Packaging of Facility Containers
• Identify one method for determining the amount of lading remaining in damaged bulk packaging of facility containers.– Shipping Papers– Container Specification markings– Gauging Devices– Frost line on container
![Page 127: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/127.jpg)
Sample Collection
• Demonstrate a method for collecting samples of the following:– Solid - brush, scrap, scoop, core, & forceps– Liquid - jars, coliwasas, bailers, dippers,
bombs, & drum thiefs– Gas - sample bags
![Page 128: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/128.jpg)
Multiple Products in Pipeline
• Describe how a liquid pipeline can carry different products.
![Page 129: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/129.jpg)
Pipeline Identification & Information
• Given an example of a pipeline, identify the following:– Ownership of the line– Procedures for checking gas migration– Procedures for shutting down the line or
controlling the leak– Type of product in the line
![Page 130: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/130.jpg)
Pressure Container Damage Terms & Definitions
• Identify the types of damage that a container including pressure containers could incur.– Cracks– Scores– Gouges– Dents
![Page 131: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/131.jpg)
Identifying Tank Car Damage
• Given examples of tank damage, identify the type of damage in each example by name.– Cracks– Scores– Gouges– Dents
![Page 132: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/132.jpg)
Mixed Chemical Incidents
• Identify at least three resources available that indicate the effects of mixing various hazardous materials.– Guide to Hazardous Chemical Reactions
NFPA 491– Handbook of Reactive Chemical Hazards -
Bretherick– Hazardous Chemicals Desk Reference -
Lewis
![Page 133: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/133.jpg)
Fire & Safety Features for Fixed Facility Storage Locations
• Identify the impact of the following fire and safety features on the behavior of the products during an incident at a bulk storage facility and explain their significance in the risk assessment process:
![Page 134: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/134.jpg)
Fire & Safety Features for Fixed Facility Storage Locations
– Fire protection systems– Monitoring and detection systems– Product spillage and control
(impoundment and diking)– Tank spacing– Tank venting and flaring systems– Transfer operations
![Page 135: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/135.jpg)
Dispersion Pattern Prediction Resources
• Identify local resources for dispersion pattern prediction and modeling including computers, monitoring equipment, or specialists in the field.– Weather Service– Computer Models (Cameo, Aloha, EIS)– Colleges & Universities– County, State, & Federal Agencies
![Page 136: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/136.jpg)
Determining Extent of Hazard within the Endangered Area
• Given the concentrations of the released material, identify the steps for determining the extent of the hazards (e.g., physical, safety, and health) within the endangered area of a hazardous materials incident.
![Page 137: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/137.jpg)
Methods for Predicting Areas of Potential Harm
• Identify two methods for predicting the areas of potential harm within the endangered area of a hazardous materials incident.
– Computer Modeling– Monitoring Equipment– Technical Assistance
![Page 138: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/138.jpg)
Estimating the Outcomes within an Endangered Area
• Identify a method for estimating the outcomes within an endangered area of a hazardous materials incident.– Analyze the following incident data
• Physical • Cognitive • Technical
![Page 139: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/139.jpg)
Estimating the Outcomes within an Endangered Area
• Components– Product– Container– Environment
• Subgroups– Damage– Hazard– Vulnerability Risk
• Additional Elements to consider– Spill– Leak– Fire
![Page 140: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/140.jpg)
Response Objectives
• Given simulated facility and transportation problems, the hazardous materials technician shall describe the response objectives for each problem. The hazardous materials technician shall be able to describe the steps for determining response objectives (defensive, offensive, nonintervention) given an analysis of a hazardous materials incident.
![Page 141: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/141.jpg)
Action Options
• Given simulated facility and transportation hazardous materials incidents, the hazardous materials technician shall identify the possible action options (defensive, offensive, and nonintervention) by response objective for each problem. The hazardous materials technician shall be able to identify the possible action options to accomplish a given response objective.
![Page 142: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/142.jpg)
Administer CerTest
End Part ITechnician
![Page 143: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/143.jpg)
TECHNICIAN
PART II
![Page 144: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/144.jpg)
Personal Protective Equipment
• Identify the four levels of personal protective equipment (EPA/NIOSH or NFPA 471) and describe the equipment for each level and the condition under which each level is used.
![Page 145: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/145.jpg)
Level A - Vapor-Protective Suits
• Fully-Encapsulated Vapor Protective Suit selected based on chemical w/ positive pressure SCBA
• Worn in presence of incompletely ID’d vapors, or gases
• One-piece suit w/double glove & boot, hard hat
• Highest Level of protection
![Page 146: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/146.jpg)
Level B - Liquid Splash-Protective Suit
• Multi-piece or Fully-Encapsulated Liquid Protective Suit selected based on chemical w/ positive pressure SCBA
• Double glove & boot, hard hat
• Vapor or gases present will not affect exposed skin
• Lesser Level of skin protection
![Page 147: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/147.jpg)
Level C - Liquid Splash-Protective Suit
• Multi-piece Liquid Protective Suit selected based on chemical w/ positive pressure SCBA
• Atmospheric, liquid splashes or direct contact will not adversely effect the wearer
• Same clothing as Level B, Air-purifying Respirator
• Lesser Level of Respiratory Protection
![Page 148: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/148.jpg)
Level D - Normal Protective Clothing
• Normal work clothing
• Work exposures prohibit splashes, immersion, or the potential for unexpected inhalation or contact with hazardous levels of chemicals
• Coveralls, Safety Boots/Shoes, Safety Glasses/goggles, hard hat
• No Respiratory protection, Minimal Skin protection
![Page 149: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/149.jpg)
Factors in Choosing Respiratory Protection
• Identify the factors to be considered in selecting the proper respiratory protection for a specified action option.– Primary Key is the Hazard of the chemical
• Correlates to the level of PPE (i.e. Level A or C)
– Use highest level of Respiratory protection until level of concentration has been determined
![Page 150: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/150.jpg)
Advantages & Disadvantages of Various Styles of Respiratory Protection
• Describe the advantages, limitations, and proper use of the following types of respiratory protection at hazardous materials incidents.
– Positive pressure self-contained breathing apparatus
– Positive pressure air line respirators with required escape unit
– Air purifying respirators
![Page 151: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/151.jpg)
Selecting Proper Respiratory Protection
• Identify the process for selecting proper respiratory protection at hazardous materials incidents.– Identify the Name of Chemical– Concentration– Hazard of Chemical (i.e. inhalation, absorption,
etc.)– Expected Exposure– OSHA Requirements
![Page 152: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/152.jpg)
Components of Air-purifying and Air-line Respirators
• Identify the operational components of air purifying respirators and air line respirators by name and describe their functions.– Air-purifying Respirator – Supplied Air Respirator
• Mask • Mask• Filter Cartridge • Manifold w/Airline• Head Harness • Escape Unit
• Air Supply
![Page 153: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/153.jpg)
Factors in Selecting Proper Chemical-Protective Clothing
• Identify the factors to be considered in selecting the proper chemical-protective clothing for a specified action option.
![Page 154: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/154.jpg)
Factors in Selecting Proper Chemical-Protective Clothing
• Risk Assessment– Identify the Hazard Present– Estimate the likelihood of exposure– Understand the consequence of exposure– Determine the risk
• Selection– Overall Suit Integrity – Design Features– Materials Chemical Resistance – Service Life– Materials Physical Properties – Cost
![Page 155: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/155.jpg)
Damage to Chemical Protective Clothing
• Describe the following terms and explain their impact and significance on the selection of chemical-protective clothing.– Degradation– Penetration– Permeation
![Page 156: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/156.jpg)
Indications of Degradation of Chemical Protective Clothing
• Identify at least three indications of material degradation of chemical-protective clothing.– Stiffness– Excess Pliability– Tears, Cuts or Abrasions– Damage to Zippers or Closures– Discoloration– Other Visible Suit Damage
![Page 157: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/157.jpg)
Types of Chemical Protective ClothingVapor & Splash
• Identify the three types of vapor-protective and splash-protective clothing and describe the advantages and disadvantages of each type.– Type I - Fully Encapsulated, SCBA inside suit– Type II - Non-Encapsulated, SCBA outside suit– Type III - Fully Encapsulated, SCBA inside suit
with Air-line supply hose passing through suit
![Page 158: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/158.jpg)
Chemical Protective Clothing Cooling Devices
• Identify the relative advantages and disadvantages of the following heat exchange units used for the cooling of personnel in chemical-protective clothing.– Air cooled– Ice cooled– Water cooled
![Page 159: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/159.jpg)
Process for Selecting Proper Protective Clothing
• Identify the process for selecting the proper protective clothing at hazardous materials incidents.– Utilize EPA/OSHA Guidelines for Levels– Insure Compatibility– Observe Breakthrough times– Follow Manufacturers Recommendations
![Page 160: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/160.jpg)
Select Appropriate Protective Clothing
• Given three examples of various hazardous materials, determine the appropriate protective clothing construction materials for a given action option using chemical compatibility charts within 30 minutes IAW DoD Instruction 6055.6 & DoD Manual 6055.6.
![Page 161: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/161.jpg)
Physical & Psychological Stresses on Wearers of Specialized Protective Clothing
• Identify the physical and psychological stresses that can affect users of specialized protective clothing.– Low Dexterity & Mobility– Low Visibility– Poor Communications– Heat Stress– Physical Stress– Claustrophobia
![Page 162: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/162.jpg)
Decontamination Advantages/Disadvantages
• Identify the advantages and limitations and describe an example where each of the following decontamination methods would be used.
![Page 163: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/163.jpg)
Decontamination Advantages/Disadvantages
– Absorption - Tools & Equipment, Limited for personnel
– Adsorption - Tools & Equipment, flat surfaces
– Chemical degradation - Tools, Equipment & Personnel
– Dilution - Most Common, Tools, Equipment, & Personnel
– Disposal - Tools, Equipment, & Clothing when decontamination is not practical or cost effective
![Page 164: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/164.jpg)
Decontamination Advantages/Disadvantages
– Evaporation - Volatile or easily evaporative liquids
– Neutralization - Tools & Equipment (creates heat)
– Solidification - Hard, flat surfaces
– Vacuuming - Solids, water reactive materials
– Washing - Very commonly used with tools, equipment, & personnel
![Page 165: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/165.jpg)
Technical Information Sources on Decontamination
• Identify three sources of technical information for selecting appropriate decontamination procedures and identify how to contact those sources in an emergency.– CHEMTREC/CANUTEC/SETIQ– Manufacturers/MSDS’s– National Response Center– Local or Regional Poison Control Centers
![Page 166: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/166.jpg)
• Given a simulated hazardous materials incident, the local emergency response plan and standard operating procedures, develop a plan of action to include safety considerations within 60 minutes IAW DoD Instruction 6055.6 & DoD Manual 6055.6.
![Page 167: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/167.jpg)
Technician Level Offensive Control Techniques
• Describe the purpose of, procedures for, equipment required, and safety precautions used with the following techniques for hazardous materials control.
![Page 168: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/168.jpg)
Purpose of, Procedures for, Equipment Required, and Safety Precautions for:
– Absorption– Neutralization– Overpacking– Patching– Plugging
![Page 169: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/169.jpg)
Common Methods for Product Transfer
• Given MC-306/DOT-406, MC-307/DOT-407, MC-312/DOT-412, MC-331, and MC-338 cargo tanks, identify the common methods for product transfer from each type of cargo tank.
![Page 170: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/170.jpg)
Safety Considerations Includedin the Plan of Action
• Given a simulated hazardous materials, develop the safety considerations that must be included in the plan of action.
![Page 171: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/171.jpg)
Safety Considerations Includedin the Plan of Action
– The plan of action describes response objectives, action options, personnel, and equipment.
– The site safety plan develops from the plan of action.
– Needs to be consistent with the LERP and SOP’s.
![Page 172: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/172.jpg)
Plan of Action Safety Considerations
• List and describe the safety considerations to be included…in the plan of action.
![Page 173: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/173.jpg)
Safety Briefing
• Identify the points that should be made in a safety briefing prior to working at the scene.
![Page 174: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/174.jpg)
Confined Space Safety Hazards
• Identify the atmospheric and physical safety hazards associated with hazardous materials incidents involving confined spaces.
![Page 175: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/175.jpg)
Confined Space Safety Hazards
• Atmospheric Hazards– Oxygen-deficient– Oxygen-enriched– Flammable/explosive– Toxic
![Page 176: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/176.jpg)
Confined Space Safety Hazards
• Physical Hazards– Engulfment– Falls/slips– Electrical– Structural– Mechanical
![Page 177: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/177.jpg)
Pre-Entry Activities
• Identify the pre-entry activities to be performed.
![Page 178: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/178.jpg)
Collecting Legal Evidence
• Identify the procedures, equipment, and safety precautions for collecting legal evidence at hazardous materials incidents.
![Page 179: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/179.jpg)
Implementing the Planned Response
• Given simulated hazardous materials incidents, describe the principles for implementing the planned response to a hazardous materials incident at the technician level with at least 80% accuracy.
![Page 180: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/180.jpg)
Duties of the Technician at a Hazardous Materials Incident
• Given the local emergency response plan or organization‘s standard operating procedures and a simulated hazardous materials incident, the hazardous materials technician shall demonstrate the duties of an assigned hazardous materials branch position within the local incident management system (IMS).
![Page 181: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/181.jpg)
Role of the Hazardous Materials Technician
• Identify the role of the hazardous materials technician during an incident involving hazardous material.
![Page 182: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/182.jpg)
Duties & Responsibilities of the Technician within Hazardous Materials Incident & IMS
• Identify the duties and responsibilities of the following hazardous materials branch functions within the incident management system.
![Page 183: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/183.jpg)
Duties & Responsibilities of the Technician within Hazardous Materials Incident & IMS
– Backup– Decontamination– Entry– Hazardous materials branch management– Hazardous materials branch safety– Information/research– Reconnaissance– Resources
![Page 184: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/184.jpg)
Duties & Responsibilities of the Technician within Hazardous Materials Incident & IMS
– Incident commander– Command staff– Planning– Logistics– Operations– Staging– Finance and administration
![Page 185: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/185.jpg)
• Given a simulated hazardous materials scenario, as a team, demonstrate the ability to set up a contamination reduction corridor and perform decontamination within 30 minutes IAW DoD Instruction 6055.6 & DoD Manual 6055.6.
![Page 186: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/186.jpg)
Setup of the Decontamination Corridor
• Demonstrate setup of the decontamination corridor as specified in the planned response.
![Page 187: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/187.jpg)
![Page 188: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/188.jpg)
The Decontamination Process
• Demonstrate the decontamination process specified in the planned response.
![Page 189: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/189.jpg)
![Page 190: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/190.jpg)
• Given specialized personal protective equipment and appropriate respiratory protection inspect, record, don, work in, and doff the clothing within 60 minutes DoD Instruction 6055.6 & DoD Manual 6055.6.
![Page 191: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/191.jpg)
Safety Procedures for Personnel Wearing Vapor-protective Clothing
• Describe three safety procedures for personnel wearing vapor-protective clothing.
![Page 192: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/192.jpg)
Emergency Procedures for Personnel Wearing Vapor-protective Clothing
• Describe three emergency procedures for personnel wearing vapor-protective clothing.– Loss of air supply– Loss of suit integrity– Loss of verbal communication– Buddy down in hot zone
![Page 193: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/193.jpg)
Procedures for Donning, Working In, and Doffing Respiratory Protection
• Identify the procedures for donning, working in, and doffing the following types of respiratory protection:– Air line respirator with escape unit– Air purifying respirator
![Page 194: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/194.jpg)
Demonstrate Donning, Working In, and Doffing Chemical-protective Clothing
• Demonstrate donning, working in, and doffing chemical-protective clothing in addition to any other specialized protective equipment provided by the authority having jurisdiction.
![Page 195: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/195.jpg)
Record the Use, Repair, and Testing of Chemical-protective Clothing
• Demonstrate the ability to record the use, repair, and testing of chemical-protective clothing according to manufacturer’s specifications and recommendations.
![Page 196: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/196.jpg)
Maintenance, Testing, Inspection, and Storage Procedures for Personal Protective Equipment
• Describe the maintenance, testing, inspection, and storage procedures for personal protective equipment provided by the authority having jurisdiction according to the manufacturer‘s specifications and recommendations.
![Page 197: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/197.jpg)
• Given necessary materials, select, maintain, and inspect the appropriate tools, and demonstrate the ability to contain various leaks on a pressure vessel within 60 minutes IAW DoD Instruction 6055.6 & DoD Manual 6055.6.
![Page 198: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/198.jpg)
Containing Leaks in Pressure Vessels
• Given a pressure vessel, select the appropriate material or equipment and demonstrate a method(s) to contain leaks from the following locations.
![Page 199: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/199.jpg)
Containing Leaks in Pressure Vessels specifically:
– Fusible metal of plug– Fusible plug threads– Side wall of cylinder– Valve blowout– Valve gland– Valve inlet threads– Valve seat– Valve stem assembly blowout
![Page 200: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/200.jpg)
![Page 201: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/201.jpg)
Closing Valves, Replacing Plugs, Tightening Loose Plugs
• Given the fittings on a pressure container, demonstrate the ability to perform the following.– Close open valves– Replace missing plugs– Tighten loose plugs
![Page 202: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/202.jpg)
• Given a 55-gal drum and an 85-gallon overpack drum, necessary tools and equipment, as a team, contain various leaks on the drum, and demonstrate three methods of overpacking, within 30 DoD Instruction 6055.6 & DoD Manual 6055.6.
![Page 203: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/203.jpg)
Drum Leak Control
• Given a 55-gal (208-L) drum, demonstrate the ability to contain the following types of leaks using appropriate tools and materials.– Bung leak– Chime– Forklift puncture– Nail puncture
![Page 204: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/204.jpg)
![Page 205: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/205.jpg)
Drum Overpacking
• Given a 55-gal (208-L) drum and an overpack drum, demonstrate the ability to place the 55-gal drum into the overpack drum using the following methods.– Rolling slide-in– Slide-in– Slip-over
![Page 206: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/206.jpg)
![Page 207: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/207.jpg)
Tool & Equipment Maintenance & Inspection
• Identify the maintenance and inspection procedures for the tools and equipment provided for the control of hazardous materials releases according to the manufacturer’s specifications and recommendations.
![Page 208: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/208.jpg)
Assessing Leaks & Spills within Confined Spaces
• Identify three considerations for assessing a leak or spill inside a confined space without entering the area.
![Page 209: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/209.jpg)
• Given a MC-306/DOT-406 cargo tank and dome cover clamp, as a team, install the clamp on the dome and stop various leaks, within 30 minutes IAW DoD Instruction 6055.6 & DoD Manual 6055.6.
![Page 210: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/210.jpg)
Product Transfer Safety Consideration
• Identify three safety considerations for product transfer.– Bonding– Grounding– Elimination of ignition sources– Shock hazards
![Page 211: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/211.jpg)
Install a Dome Cover Clamp
• Given a MC-306/DOT-406 cargo tank and a dome cover clamp, demonstrate the ability to install the clamp on the dome properly.
![Page 212: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/212.jpg)
![Page 213: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/213.jpg)
Fire Involving MC 306/DOT 406 Aluminum Shell Cargo Tanks
• Identify the methods and precautions used when controlling a fire involving an MC-306/DOT-406 aluminum shell cargo tank.
![Page 214: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/214.jpg)
Containing Leaksin Various Cargo Tank Trucks
• Describe at least one method for containing each of the following types of leaks in MC-306/DOT-406, MC-307/DOT-407, and MC-312/DOT- 412 cargo tanks:
![Page 215: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/215.jpg)
Containing Leaksin Various Cargo Tank Trucks
– Dome cover leak– Irregular-shaped hole– Puncture– Split or tear
![Page 216: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/216.jpg)
Product Removal & Transferfrom Cargo Tank Trucks
• Describe three product removal and transfer considerations for overturned MC-306/DOT-406, MC-307/DOT-407, MC-312/DOT-412, MC-331, and MC-338 cargo tanks.– Inherent risk associated with such operations– Procedures and safety precautions– Equipment required
![Page 217: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/217.jpg)
• Given a copy of the local emergency response plan, identify the element of the plan necessary to implement the planned response within 60 minutes IAW DoD Instruction 6055.6 & DoD Manual 6055.6.
![Page 218: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/218.jpg)
Evaluating Progress
• Given a scenario and a plan of action, identify the effectiveness of control functions with at least 80% accuracy.
![Page 219: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/219.jpg)
Evaluating Effectiveness of Control Functions
• Given various simulated facility and transportation hazardous materials incidents involving nonbulk and bulk packaging and the plan of action, the hazardous materials technician shall evaluate the effectiveness of any control functions listed in the plan of action.
![Page 220: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/220.jpg)
Terminating the Incident
• Given various simulated hazardous materials incidents, identify the principles associated with terminating an incident at the technician level with at least 80% accuracy.
![Page 221: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/221.jpg)
Components of a Debriefing
• Describe three components of an effective debriefing.
![Page 222: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/222.jpg)
Key Topics of an Effective Debriefing
• Describe the key topics of an effective debriefing.
![Page 223: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/223.jpg)
When to Perform a Debriefing
• Describe when a debriefing should take place.
![Page 224: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/224.jpg)
Who Should attend the Debrief
• Describe who should be involved in a debriefing.
![Page 225: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/225.jpg)
Components of an Effective Critique
• Describe three components of an effective critique.
![Page 226: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/226.jpg)
Who Should Attend the Critique
• Describe who should be involved in a critique.
![Page 227: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/227.jpg)
Necessity of an Effective Critique
• Describe why an effective critique is necessary after a hazardous materials incident.
![Page 228: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/228.jpg)
Written Documents as a Result of the Critique
• Describe which written documents should be prepared as a result of the critique.
![Page 229: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/229.jpg)
Reports & Documentation Required to Conclude a Response
• Identify the reports and supporting documentation required by the local emergency response plan and the organization’s standard operating procedures.
![Page 230: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/230.jpg)
Complete Required Reports
• Demonstrate the proper completion of the reports required by the local emergency response plan and the organization’s standard operating procedures.
![Page 231: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/231.jpg)
Incident Reports
• Identify the steps to be taken in compiling incident reports that meet federal, state, local, and organizational requirements.
![Page 232: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/232.jpg)
Exposure Records
• Describe the importance of personnel exposure records.
![Page 233: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/233.jpg)
Debriefing Records
• Describe the importance of debriefing records.
![Page 234: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/234.jpg)
Critique Records
• Describe the importance of critique records.
![Page 235: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/235.jpg)
Activity Log & Exposure Records
• Identify the steps in keeping an activity log and exposure records for hazardous materials incidents.
![Page 236: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/236.jpg)
Entry & Exit Logs
• Identify the requirements for compiling hot zone entry and exit logs.
![Page 237: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/237.jpg)
PPE Logbooks
• Identify the requirements for compiling personal protective equipment logs.
![Page 238: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/238.jpg)
Filing Documents & Maintaining Records
• Identify the requirements for filing documents and maintaining records.
![Page 239: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/239.jpg)
• Given a scenario, as a team, demonstrate the ability to direct resources, terminate the incident, provide a debriefing, conduct a critique, and document the incident within 4 hours IAW DoD Instruction 6055.6 & DoD Manual 6055.6.
![Page 240: Hazardous Materials Training by HERRING FETI](https://reader036.vdocuments.site/reader036/viewer/2022070515/5878fb4a1a28ab49608b6863/html5/thumbnails/240.jpg)
Administer CerTest
End Part IITechnician