hazardous materials awareness welcome to. without reference, determine the general principles of a...
TRANSCRIPT
Hazardous Materials Awareness
Welcome to
• Without reference, determine the general principles of a First Responder at the Awareness Level with at least 80% accuracy.
ATTAINMENT STANDARD
INTRODUCTION
• First Responders at the Awareness Level shall be trained to meet all competencies of NFPA 472 Chapter 2 (1997 Edition).
CerTest LO 001
• Shall receive additional training to meet applicable requirements of the:– U.S. Department of Transportation (DOT)
– Environmental Protection Agency (EPA)
– Occupational Safety & Health Administration (OSHA)
INTRODUCTION
CerTest LO 001
DEFINITION
• Persons who, in the normal course of their duties, could be the first on scene of an emergency involving hazardous materials.
• Expected to recognize the presence of hazardous materials, protect themselves, call for trained personnel, and secure the area.
CerTest LO 001
GOAL
• The goal of the first responder working toward the awareness level shall be to obtain competency in the knowledge and skills necessary to perform the following tasks safely:
CerTest LO 001
GOALANALYZE THE INCIDENT
• Determine the hazardous materials present and basic response information by completing the following tasks:
1 Detect the presence of HazMat’s
2 Survey from a safe distance
3 Collect information from the North American Emergency Response Guidebook (NAERG)
CerTest LO 001
GOALIMPLEMENT ACTIONS
• Consistent with the Local Emergency Response Plan (LERP), the organization’s Standard Operating Procedures (SOP), and the current edition of the NAERG bycompleting the following tasks:
1 Initiate protective actions.
2 Initiate the notification process.
CerTest LO 001
ANALYZING THE INCIDENT
• Given various facility and/or transportation situations or both, with and without hazardous materials present, identify principles of analyzing a hazardous materials response at the awareness level with at least 80% accuracy.
DEFINITIONS OF HAZARDOUS MATERIALS & DANGEROUS GOODS
• Identify the definitions of hazardous materials (Dangerous Goods in Canada).
CerTest LO 002
• Definition: The U.S. Department of Transportation (DOT), a hazardous material is one that falls within 11 hazard classes some of those which have subcategories known as divisions.
HAZARDOUS MATERIALS (DOT)
CerTest LO 002
HAZARDOUS MATERIALS (DOT)
• Additionally, DOT states that “Hazardous materials pose an unreasonable risk to the health and safety of operating or emergency personnel, the public, and/or the environment if it is not properly controlled during handling, storage, manufacture, processing, packaging, use, disposal, or transportation.”
CerTest LO 002
HAZARDOUS SUBSTANCES (EPA)
• Definition: Environmental Protection Agency (EPA) term for chemicals that, if released into the environment above a certain amount, must be reported, and, depending on the threat to the environment, federal involvement in handling the incident can be authorized.
CerTest LO 002
EXTREMELY HAZARDOUS SUBSTANCES (EPA)
• Definition: EPA term for chemicals that must be reported to the appropriate authorities if released above the threshold reporting quantity.
CerTest LO 002
TOXIC CHEMICALS (EPA)
• Definition: EPA term for chemicals whose total emissions or release must be reported annually by owners and operators of certain facilities that manufacture, process, or otherwise use a listed toxic chemical.
CerTest LO 002
HAZARDOUS WASTES (EPA)
• Definition: EPA term for chemicals that are regulated under the Resource, Conservation, and Recovery Act.
CerTest LO 002
HAZARDOUS CHEMICALS (OSHA)
• Definition: Occupational Safety & Health Act (OSHA) term that denotes any chemical that would be a risk to employees if exposed in the work place.
CerTest LO 002
HIGHLY HAZARDOUS CHEMICALS
• Definition: OSHA term that denotes any chemical that would posses toxic, reactive, flammable or explosive properties.
CerTest LO 002
DANGEROUS GOODS (Canada)
• Definition: All hazardous materials are called dangerous goods in Canadian Transportation.
CerTest LO 002
DOT HAZARD CLASSES & DIVISIONS
• Identify DOT Hazard classes and divisions of hazardous materials and identify common examples of materials in each hazard class or division.
CerTest LO 003
Primary Hazardsof DOT Classes & Divisions
• Identify the primary hazards associated with each of the DOT hazard classes and divisions of hazardous materials by hazard class or division.
CerTest LO 003
Placards & Labels
• Identify U.S. and Canadian placards and labels that indicate hazardous materials.
CerTest LO 003
• The DOT has classified hazardous materials according to their primary danger and assigned standardized symbols to identify the classes.
Classes & Divisions
CerTest LO 003
• Materials are grouped by their major hazardous characteristic and manymaterials will have other hazards as well.
Example: A material may be poisonous, corrosive, and flammable but will only be grouped with whichever is considered the worst.
CLASSES & DIVISIONS
CerTest LO 003
Class 1 (Explosives)
• Major Hazard: Explosion
• Any substance or article, including a device, that is designed to function by explosion (i.e...... an extremely rapid release of gas and heat) or that, by chemical reaction with itself, is able to function by explosion.
NFPA Objective 2-2.1.2CerTest LO 003
Divisions
• DOT has divided Class 1 hazards fall into 6 divisions.
NFPA Objective 2-2.1.2CerTest LO 003
Class 1.1
• Mass explosion that affects almost the entire load
CerTest LO 003
Class 1.2
• Projection hazard but not a mass explosion hazard
CerTest LO 003
Class 1.3
• Fire hazard and either a minor blast or minor projection hazard
CerTest LO 003
Class 1.4
• Presents a minor explosion hazard
CerTest LO 003
Class 1.5
• Very insensitive explosives with mass explosion hazard
CerTest LO 003
Class 1.6
• Extremely insensitive explosives
CerTest LO 003
Class 2 - Compressed Gases
• Major Hazard: BLEVE
• Sub Hazards
– Flammable
– Oxidizer
– Poisonous
– Nonflammable
• Divided into 3 divisions
NFPA Objective 2-2.1.2
CerTest LO 003
Class 2.1 Flammable Gases
• A material that is a gas at 68º F or less at 14.7 psi or has a boiling point of 68º degrees or less at 14.7 psi.
– Ignitable at 14.7 psi in a mixture of 13% or less by volume with air
– Has a flammable range of at least 12% regardless of the lower limit.
CerTest LO 003
Class 2.2 Nonflammable, Nonpoisonous Gases
• Any material or mixture that exerts an absolute pressure of 41 psia at 68º F.
• Compressed gases, including liquefied gas, pressurized cryogenic gas, and compressed gas in solution.
CerTest LO 003
Class 2.3 Poisonous Gas
• Vaporize easily and very dangerous to life, even in small amounts.
• Known to be so toxic to humans as to pose a hazard to health during transportation.
• Presumed to be toxic because of laboratory testing.
CerTest LO 003
Hazard Zones Associatedwith Division 2.3
• Utilizes LC-50 (Lethal Concentration 50%)
• Concentration of a material, expressed as
parts per million which kills half of the lab
animals in a given length of time.
• Significant in determining the toxicity of a
material; the lower the value, the more
toxic the substance.CerTest LO 003
2.4 Corrosive Gas (Canada)
• Gases which have a corrosive hazard
(Canadian transportation only)
CerTest LO 003
Class 3 Flammable Liquids
• Major Hazard: Burns readily
• Flammable and Combustible liquids
CerTest LO 003
Flammable Liquids
• Any liquid having a flash point (FP) of not more than 141 degrees F.
– Three divisions• 3.1 - FP < 0 degrees F• 3.2 - FP 0 to < 73 degrees F• 3.3 - FP 73 to < 141 degrees F
CerTest LO 003
Combustible Liquid
• Any liquid that does not meet the definition of any other hazard class and has a flash point above 141 degrees F and below 200 degrees F.– NOTE: A flammable liquid with a flash point at
or above 100 degrees that does not meet the definition of any other hazard class except 9, may be reclassified as combustible.
CerTest LO 003
Class 4 (Flammable Solids)
• Major Hazard: Rapid combustion with a liberation of mass quantities of smoke (toxic).
– Divided into 3 divisions• 4.1 Flamable Solids• 4.2 Spontaneously Combustible• 4.3 Dangerous When Wet
CerTest LO 003
4.1 Flammable Solids
• Three types
– Wetted explosives
– Self-reactive materials
– Readily combustible solids
CerTest LO 003
Wetted Explosives
• Explosives wetted with sufficient water, alcohol, or a plasticizer to suppress explosive properties.
CerTest LO 003
Self-Reactive Materials
• Materials that are liable to undergo, at normal or elevated temperatures, a strongly exothermic decomposition.
CerTest LO 003
Readily Combustible Solids
• Solids that may cause a fire through friction and metal powders that can be ignited.
CerTest LO 003
4.2 Spontaneously Combustible Materials
Pyrophoric Materials
• A liquid or solid that, even in small quantities and without an external ignition source, can ignite within 5 minutes after coming in contact with air.
CerTest LO 003
4.2 Spontaneously Combustible Materials
Self-heating material
• A material that, when in contact with air and without an energy supply, is liable to self-heat.
CerTest LO 003
4.3 Dangerous When Wet Materials
• Material that, by contact with water is liable to become spontaneously flammable or to give off flammable or toxic gas at a rate of greater than 1 l/kg of the material, per hour.
CerTest LO 003
Class 5 (Oxidizers)
• 2 Divisions
• Major Hazard 5.1:Supports combustion and intensifies fire.
• Major Hazard 5.2:Unstable/reactive explosives
CerTest LO 003
• Materials that may, generally by yielding oxygen, cause or enhance the combustion of other materials.
5.1 Oxidizers
CerTest LO 003
5.2 Organic Peroxides
• Any organic compound containing oxygen in the bivalent O-O structure that may be considered a derivative of hydrogen peroxide, where one or more of the hydrogen atoms have been replaced by organic radicals.
• Organic peroxides have been further broken down into types a-g(worst to least hazardous).
CerTest LO 003
Class 6 Poisons
• 2 DivisionsNOTE: Poisonous gases are Class 2 Division 3– 6.1 Poisonous Material
• Major Hazard: Toxicity
– 6.2 Infectious Substances• Major Hazard: Infectious
CerTest LO 003
6.1 Poisonous Materials
• A material, other than a gas, that is either known to be so toxic to humans as to afford a hazard to health during transportation, or in the absence of adequate data on human toxicity, is presumed to be toxic to humans, including irritating materials that cause irritation.
CerTest LO 003
6.2 Infectious Substances
• A viable microorganism, or its toxin, that causes disease in humans or animals.
• Infectious substance and etiologic agents are the same.
• No Placards (labels only)
CerTest LO 003
Class 7 Radioactive
• Major Hazard: Radioactive poisonous burns
• Definition: Materials having a specific activity greater than 0.002 microcurie per gram.
CerTest LO 003
Class 8 Corrosives
• Major Hazard: burns/emulsification skin damage.
• Definition - A liquid or solid that causes visible or irreversible alterations in human skin tissue at the site of contact, or a liquid that has a severe corrosion rate on steel or aluminum.
CerTest LO 003
Class 9 Miscellaneous Hazardous Materials
• A material that presents a hazard during transport, but that is not included in another hazard class
CerTest LO 003
Class 9
• Division 9.1 - Miscellaneous Dangerous Goods (Canada)
• Division 9.2 - Environmentally Hazardous Substances (Canada)
• Division 9.3 - Dangerous Wastes (Canada)
CerTest LO 003
Other Regulated Materials (ORM-D)
• A material that presents a limited hazard during transportation due to its
• Form
• Quantity
• Packaging
No Placards (labels only)CerTest LO 003
Forbidden Materials
• Materials prohibited from being offered or accepted for transportation. Does not apply if the materials are diluted, stabilized, or incorporated in devices. There is no placard for these items since they aren't transported.
CerTest LO 003
Marine Pollutant
• Is a material that has an adverse effect on aquatic life.
CerTest LO 003
Elevated Temperature Material
• Is a material that, when offered for transportation in a bulk packaging, meets one of the following conditions:
– Liquid at or above 100ºC (212ºF)– Liquid with a flash point at or above 37.8ºC (100ºF)
that is intentionally heated and is transported at or above its flash point.
– Solid at a temperature at or above 240ºC (464ºF)
CerTest LO 003
HazMat Vs. Other Emergencies
• Identify differences between hazardous materials incidents and other emergencies.
– Potential for large scale harm
– Specialized training required
CerTest LO 004
Locations of Hazardous Materials
• Identify typical occupancies and locations in the community where hazardous materials are manufactured, transported, stored, used, or disposed of.
– Warehouses Laboratories
– Tank Farms Truck Terminals
– Weapons Depots Flight Line
– Hospitals Maintenance Facilities
CerTest LO 005
Locations of Hazardous Materials
• Personnel developing the pre-incident plans should seek assistance from the facility manager in identifying hazardous materials locations and recording them on the plan in a way that will be useful to the first-arriving companies.
CerTest LO 005
• Hazardous materials that are manufactured, stored, processed, or used at a particular site are NOT subject to regulations affecting transported materials.
Locations of Hazardous Materials
CerTest LO 005
NFPA Objective 2-2.1.5
Liquefied Petroleum Gas Storage Area
Front of Pool Supply Store
Container Shapes
• Identify typical container shapes that may indicate hazardous materials.
– Radioactive
Protective overpacks
Casks
CerTest LO 006
Container Shapes
• Pressurized products
– Cylinders
• Rounded ends
• Cryogenic cylinders (insulated)
CerTest LO 006
Container Shapes
• Pressurized products (continued)
– MC-331 pressure cargo tank trailer– Pressure tank car– Tube modules– Tube trailers– High pressure tube cars
CerTest LO 006
MC 331
Pressure Rail Car
Container Shapes
• Cryogenics (a tank-within-a-tank)
– MC-338
– Cryogenic tank car
CerTest LO 006
MC 338
Cryogenic Rail Car
Container Shapes
• Corrosives
– Carboys
– MC-312
CerTest LO 006
MC 312
Container Shapes
• Flammable Liquids
- Drums
- Jerricans
- MC-306
- Non-pressure tank car
• Dry Bulk
CerTest LO 006
MC 306
Non Pressure Rail Car
Hopper
Facility & Transportation Markings
• Identify facility and transportation markings and colors that indicate hazardous materials.
– Placards - Pipeline markings
– NFPA 704 - Container markings
– Military markings
– Special hazard communication markings
CerTest LO 007
Markings & Colors
• Transportation markings and colors that indicate hazardous materials.
– Placards• United Nations Class Number • Four digit identification number
• Symbols and colors
• Name of material
CerTest LO 007
UN/NA ID Numbers
NFPA Objective 2-2.1.7
POISON
GAS
2
1026
• UN Class numbers (bottom of placard)
• Hazard class or ID numberon placard or orange panel
• Symbols and colors
• Name of material
CerTest LO 007
Markings & Colors
NFPA 704• Suggested method for identifying hazardous
materials
• Scale of 0-4 (4 being the worst hazard)
• Used only for facilities when mandated by
local ordinances
CerTest LO 007
Markings & Colors
– Military hazardous materials markings
• Class 1, Division 1 • Class 1, Division 2• Class 1, Division 3• Class 1, Division 4
CerTest LO 007
Class 1, Division 1
• Materials that present a mass denotation hazard
CerTest LO 007
Class 1, Division 2
• Presents an explosion with fragmentation hazard
CerTest LO 007
Class 1, Division 3
• Materials with amass fire hazard
CerTest LO 007
Class 1, Division 4
• Materials that present a moderate fire hazard
CerTest LO 007
Special Warnings
• Chemical hazards
Highly Toxic
Harassing Agents
White Phosphorus
Munitions
CerTest LO 007
Special Warnings
Apply No Water Wear Protective Breathing Apparatus
CerTest LO 007
NFPA Objective 2-2.1.7
Markings & Colors
• Special hazard communication markings
• Pipeline markers– Metal sign placed adjacent to a hazardous
materials pipeline right of way.
– Contains information about
• product and signal word• ownership of the line• emergency telephone number
Petroleum
CerTest LO 007
Markings & Colors
• Container Markings
– Markings on a container will provide some indication as to the type of product it holds
CerTest LO 007
NFPA 704 Marking System
• Given an NFPA 704 marking, describe the significance of the colors, numbers, and special symbols.
CerTest LO 008
NFPA 704 Marking
• Suggested method for identifying hazardous materials
• Scale of 0-4 (4 being the worst hazard)
• Used only for facilities when mandated by local ordinances
CerTest LO 008
NFPA 704 Colors & Their Meanings
1. Blue = Health
2. Red = Flammability
3. Yellow = Reactivity
4. White = Special
CerTest LO 008
W
SPECIAL INFORMATION
Avoid Use of Water
Oxidizer (OX) (OXY)
Used by some to indicate Alkaline materials
Used by some to indicate Acidic materials
CerTest LO 008
Material Safety Data Sheets
• Identify where to find Material Safety Data Sheets (MSDS).
– Why they are necessary
– OSHA has required all establishments to keep on file an MSDS for each chemical stored or used on site
CerTest LO 009
Material Safety Data Sheets
• Identify basic information on Material Safety Data Sheets (MSDS) that indicates hazardous materials.
CerTest LO 010
MSDS Sample Information
Shipping Papers
NFPA Objective 2-2.1.10
Shipping Papers
• Identify entries on shipping papers that indicate the presence of hazardous materials.
- Proper shipping name
- Hazard class and division
- Product identification number
- STCC number
- CAS number (chemical’s social security number)
CerTest LO 010
NFPA Objective 2-2.1.9.3
Shipping Papers
• Match the name of the shipping papers found in transportation (air, highway, rail, and water) with the mode of transportation.
CerTest LO 011
Shipping Papers
• Identify the person responsible for having the shipping papers in each mode of transportation.
CerTest LO 011
Shipping Papers
• Identify where the shipping papers are found in each mode of transportation.
CerTest LO 012
Shipping Papers
• Identify where the papers can be found in an emergency in each mode of transportation.
– Normal location• Highway• Rail• Water• Air
CerTest LO 012
Location of Shipping Papers& Responsible Person
Highway - cab of vehicle - Driver Rail - Engine or caboose - with
conductor or engineer Water - Wheelhouse or pipe-like
container on a barge - Captain or master Air - Cockpit/flight-deck or attached to
package - pilot
NFPA Objective 2-2.1.9.5NFPA Objective 2-2.1.10.4CerTest LO 011 & 012
Clues Used to IdentifyHazardous Materials
• Identify examples of clues (other than occupancy/location, container shape, markings/colors, placards/labels, MSDS, and shipping papers) that use the senses of sight, sound, and odor to indicate hazardous materials.
CerTest LO 013
Limitations of Using Your Senses!
• Describe limitations of using the senses in determining the presence or absence of hazardous materials.
CerTest LO 014
Targets of Criminal/Terrorist ActivityUsing Hazardous Materials
• Identify types of locations that could become targets for criminal or terrorist activity using hazardous materials.
CerTest LO 015
Criminal/Terrorist Activity Indicators
• Identify at least 4 indicators of possible criminal or terrorist activity involving hazardous materials.
CerTest LO 016
Difficulties Determining Namesof Hazardous Materials
• Identify difficulties encountered in determining the specific names of hazardous materials in both facilities and transportation.
– Facilities
– Transportation
CerTest LO 017
Sources for Obtaining Namesof Hazardous Materials
• Identify sources for obtaining the names of, UN\NA identification numbers for, or types of placard associated with hazardous materials in transportation.
CerTest LO 018
Obtaining Names of Productsin Facilities
• Identify sources for obtaining names of hazardous materials in a facility.
CerTest LO 019
Protecting Yourself & Others
• Identify the basic precautions to be taken to protect themselves and others in a hazardous materials incident.
CerTest LO 024
Victim Medical Care
• Identify the precautions necessary when providing emergency medical care to victims of hazardous material incidents.
CerTest LO 025
Ignition Sourcesat HazMat Incidents
• Identify the typical ignition sources found at the scenes of hazardous materials incidents.
CerTest LO 026
Harmful Effectsof Hazardous Materials
• Identify ways hazardous materials are harmful to people, the environment, and property at hazardous materials incidents.
CerTest LO 027
Routes of Entry
• Identify general routes of entry for human exposure to hazardous materials.
– Contact– Absorption– Inhalation– Ingestion
CerTest LO 028
Collecting Information& Initiating Response Actions
• Given the name, UN/NA identification number or type placard, a current copy of the North American Emergency Response Guidebook (NAERG) a local emergency response plan and standard operating procedures, and a facility or transportation scenario including hazardous materials, collect hazard information, initiate protective actions, and initiate the notification process within 60 minutes.
Determine the AppropriateGuidebook Pages
• Four digit ID# (yellow pages)
• Spelling of the product (blue pages)
• Placards (table of placards)
• Dealing with an unknown
Information Available
NAERG General Hazards
• Identify the two general types of hazards found on each guide page.
– Fire and Explosion Hazard
– Health Hazard
– “P” presents a polymerization hazard
NAERG Response Information
• Given the identity of various hazardous materials (name, UN/NA identification number, or type placard), identify the following response information:
– Emergency actions from guide pages– Protective Clothing– Initial isolation & protective action distances
NAERG Personnel Protective Clothing
• Given the name of a hazardous material, identify the recommended personal protective clothing from the following list:
– Street clothing and work uniforms– Structural fire fighter’s protective clothing– Positive pressure SCBA– Chemical protective clothing and equipment.
Protective Actions
• Identify the definitions for each of the following protective actions:
– Isolate hazard area and deny entry– Evacuate– Sheltering in-place protection
NAERG Protective Zone Shapes
• Identify the shapes of recommended initial isolation and protective action zones.
– Initial isolation zone is circular.
– The protective action zone is a square shape.
INITIAL
ISOLATION
DISTANCE
1/21/2
DOWNWINDDOWNWIND
DISTANCEDISTANCE
1/21/2
DOWNWINDDOWNWIND
DISTANCEDISTANCE
PROTECTIVEACTION ZONE
INITIALISOLATION
ZONE
Initial Isolation Zone and Protective Action Zone
Downwind Downwind DistanceDistance
Small Versus Large Spills
• Describe the difference between small and large spills as found in the table of Initial Isolation and Protective Action Distances.
– Small spill
– Large spill
Small Spill Large Spill
NFPA Objective 2-4.1.4.4
Initial & Protective Action Distances
• Identify the circumstances under which the following distances are used at a hazardous materials incident:
– Table of initial isolation and protective action distances
– Isolation distance in the numbered guides
Green Versus OrangeBordered Pages
• Describe the difference between the isolation distances in the orange-bordered guide pages and the protective action distances in the green-boarded pages.
– Green-bordered
– Orange-boarded
Where is Your LERP & SOP’s?
• Location of both the Local Emergency Response Plan (LERP) and the organization’s Standard Operating Procedures (SOP).
Role of the Awareness LevelEmergency Responder
• Guidelines are found in:
– The local emergency response plan.– The organization’s standard operating
procedures.– North American Emergency Response
Guidebook
Techniques Usedto Isolate & Deny Entry
• Identify the techniques used to isolate the hazard area and deny entry to unauthorized persons at hazardous materials incidents.
Criminal/Terrorist Specific Actions
• Identify the specific actions necessary when an incident is suspected to involve criminal or terrorist activity.
Initial Notification Procedures
• Given either a facility or transportation scenario involving hazardous materials, regardless of the presence of criminal or terrorist activities, the first responder at the awareness level shall identify the appropriate initial notifications to be made and how to make them, consistent with the local emergency response plan or the organization's standard operating procedures.
Initial Notification Procedures
• To make the appropriate notifications the awareness level responder must:
– Be familiar with the notification process
– Rapidly set the proper notification process in motion
Final Exam
• Administer the Awareness computer-based final exam on CerTest and the required performance test evaluations.