gtm100 - gaimc · 3. gtm100 rtd transmitter could effectively protect equipment damage from...
TRANSCRIPT
T +86 029-81292510 : E : [email protected] Xi 'an Gavin Electronic Technology Co., Ltd W : www.gaimc.com
GTM100 slide switch RTD temperature transmitter is an intelligent two-wire PC
programmable RTD transmitter with its range set by slide switch. It could linearize RTD input
for 4-20mA (two-wire) output and transmit the output signal to system control equipment like
DCS or PLC with features of sensor damage or short circuit preset. The product is powered
by output circuit (no separate power needed) and shall be installed in junction box of
temperature sensor. Installation opening is in cylinder shape for fitting different size of
junction box. With installation frame, GTM100 could also installed on DIN rails.
FEATURES
PRODUCT DESCRIPTION
GTM100
1. GTM100 adopts circuit design with lightening protection and EFT resistant function, thus the product is lightening resistant.
The product could protect related equipment effectively under 5 continuous inductive thunder (≤±4000V).
2. Both input and output could resist ±4000V EFT interference.
3. GTM100 RTD transmitter could effectively protect equipment damage from faradism, switch on and off of high capacity equipment
in power system, line fault, switching, operation of frequency conversion equipment or welding machine, etc.
4. Product with compact structure design and easy for installation.
5. Super low consumption inner circuit design will greatly reduce temperature drift caused by heat dissipation of instrument
components. This had improved long period stability of the product and prolonged its service life.
6. Operating temperature range for the product is -40~+85℃. GTM100 RTD transmitter could operate under harsh environment.
Head Mounted Digital RTD Temperature Transmitter
Configuration mode Slide switch + PC programmable
Separate power debugging No
Pt100, Cu50, Pt1000
Temperature range -200~+850℃
Accuracy ≤0.2% or 0.2K
Output 4-20mA (two-wire)
Alarm In case of sensor failure (open or short circuit), output of GTM100 will decrease to ≤3.6mA or increase to ≥21.5mA
Calculation of max. load (Power V-9V)/ 0.025A (Output current)
Current limitation ≤25mA
Power 9-30VDC
Response time 1S
Lightening protection ±4000V (5 times)
EFT interference resistance ±4000V
Operating temperature range -40~85℃
Temperature drift 0.0118%FS/1℃
Long period stability ≤0.1℃ / year or 0.05% / year
Input
SPECIFICATION
T +86 029-81292510 : E : [email protected] Xi 'an Gavin Electronic Technology Co., Ltd W : www.gaimc.com
TYPE SELECTION
GTM-
Model
B
100
Note
Range setting
A
Head mounted digital slide switch RTD transmitter
Slide switch
PC program
Pt100
Cu50
Pt1000
Customization
Default range
Customized range (15 ranges at top)
Standard type
With calibration report
Temperature sensor type
A
B
C
X
A
X
Mode
Temperature range
A
B
Note:
1. Please confirm temperature measurement range and input type before ordering.
2. Note us for your measurement range if it is not in our standard range list.
3. Default alarm is switched off. Please inform us if this function is needed.
Select main model according to requirement, the whole process shall be main model + range setting + sensor type + measurement
range + mode.
Type selection process:
Power and current output Measurement range setting
Sensor wiring Two-wire RTD
Three-wire RTD
Four-wire RTD
DIMENSION & ELECTRICAL CONNECTION
INSTALLATION DIAGRAM
MEASUREMENT RANGE SETTING
No power needed for measurement range setting, more efficient.
Slide switch pattern Range Slide switch pattern Range
Note:
1. Default range shall be with three-wire RTD connection and alarm is switched off.
2. When default range could not meet your requirement, or advanced setting is necessary, please take configuration tool for
slide switch setting.
T +86 029-81292510 : E : [email protected] Xi 'an Gavin Electronic Technology Co., Ltd W : www.gaimc.com
Software to take effect