greenbuilding solutions

GREEN BUILDING SOLUTIONS

Solutions Covering SANS 10400 XA : National Building Regulations

Rhino Group of Companies

- INDEX -

1. Introduction to the Rhino Group

2. 3D product overview : Residential & Commercial/Industrial

3. Overview of projects completed by the Group

4. Construction sheeting

5. Envirotuff roofing & wall insulation (Radiant barriers)

6. Profiled polycarbonate roof sheeting

7. Solid sheet polycarbonate roofing sheeting

8. Multiwall hollow polycarbonate sheeting

9. Double Glazing solutions for all buildings

10. Showerheads - Water and Energy Saving (Oxygenics)

11. Rain Water Harvesting and Water Storage Solutions

12. Biogas Digester System

13. Black Water Effluent Treatment Plants

14. Complete Water Purification Systems

15. Ozone Water Treatment Solutions (tap to Industrial/Municipal Plants)

16. Ozone Air Treatment units (portable/Treatment via Air Duct Systems)

17. Water Heating Solutions : Solar Systems and Heat Pumps (Ind/Res)

18. Solar PV Systems (Hybrid – Res & Large scale Off Grid Solutions – Ind)

19. Large scale Power Plants (Solar Farms, CSP and Biogas) fully integrated

20. LED Lighting (down lights/industrial high bays/floodlights

21. Irrigation Solutions for developments

22. Water features & dams (water storage) Design/supply/installation

23. Under floor Heating Solutions (Heat Storage Tanks & Cooling options)

24. Solar Geysers (full range of products)

25. Air Conditioners (Energy Efficient)

26. Construction Accessories

Introduction to the Rhino Group

From humble beginnings as a plastic recycler more than 30 years ago, the Rhino Group has diversified extensively; initially into the manufacturing of plastic sheeting & films for the construction, packaging and agricultural sectors, as well as irrigation piping into the latter as well, to representing a myriad of international suppliers so as to trade successfully into those same sectors and build sizeable market shares.

The Rhino Group continued to grow through investment into its’ own distribution structure, with own branches in Port Elizabeth, East London, Johannesburg and Cape Town, along with own warehousing capacity, plus then a network of agents throughout South Africa and a number of neighbouring countries. Employee numbers continued to grow over the years, totalling now around 300.

Group strategy has more recently led to investments into renewable energy and water treatment solutions, with Rhino Energy Solutions and Rhino Water Technologies being formed, working closely with leading national specialists in such fields. Rhino AgriVantage was also formed pursuant to enhancing our agricultural presence.

Two pivotal elements of the Rhino Groups’ strategies are:

• Green building solutions [incorporating construction materials, passive design elements, energy demand mitigation & renewable energy supply as well as rainwater harvesting & waste water recycling]. Our historic involvement in the construction sector, including through the distribution of rated insulation material, has ensured understanding of and alignment with the new SANS 10400 XA New Building Regulations.

• ‘Food-Energy-Water’ [agricultural supplies, fertilisers, irrigation – as well as the energy and water solutions as captured in the bullet point above]

Significant synergies exist between the various elements, thereby very often ensuring unique turnkey abilities; in addition, a solutions-centric approach versus product push creates further value.

Examples of some recent or current turnkey projects include:

• King Shaka International Airport [Durban] – initially secured under tender, with European associates, +-R300m project for the design, erection and commissioning of largest greenhouse project in SA, then Rhino secured numerous tenders/projects to attend to all rainwater harvesting and effluent treatment to irrigate the greenhouse production, as well as damlining and other water-related work, plus then one of just a few invited to tender for the solar energy solution at the airport

• A large eco-estate – overall hybrid solar/biomass solution for the entire development, consulting on the electrical backbone to facilitate renewable energy, solar solutions [power, water, under-floor heating] at residential unit level, passive design/energy demand mitigation, rainwater harvesting and all waste water recycling. Agricultural support to such ancillary initiatives at the estate

• Similar holistic solutions for other developments

• Solar park installations, from 1MW to 60MW

Our strategic intent is very much encompassed in the statement ‘Partnering with Professionals’ and as such we would appreciate any opportunity to engage further with you.

Some Examples of Various Projects the Rhino Group has been Involved in around the Country

Aquaculture Project Value ± Ten Million Rand

Mushroom Project Value ± Three Million Rand

Damlining together with Floating Covers Value ±Four Million Rand

Dube Turnkey Greenhouse Project Value ± Three Hundred Million Rand

Greenhouse Projects ± Twenty Million Rand

Irrigation Projects

Containerized Schools for Samsung – Madiba’s Village

50KW Grid Tied System

360 Schools Off Grid Throughout the Eastern Cape

Full Range of SABS Approved Dampseal Waterproof Membrane

Type A (Orange) 3m to 6m 500mic to 1000mic Type D (Orange) 3m to 6m 250mic to 375mic Type B (Black) 110mm to 600mm 375mic Type E (White) 1,5m 250mic Type C (Green) 3m to 6m 250mic Type F (Black) 1m to 6m 250mic

Manufactured in Facility that is ISO 9001 Compliant with full Quality Systems in Place

Coping and Roof Slab Cavity Wall Construction Solid Wall Construction Solid Wall Construction Solid Wall Construction

External Tanking Under Surface Beds Drained Cavity System Overlaps and Joints

Dampseal Membrane Installations

Full Range of Roof & Wall INSULATION MATERIALS Manufactured and Compliant with SANS 428

5 products in the Envirotuff range. RESIDENTIAL APPLICATIONS: (UNDERTILE MEMBRANE) Envirotuff 199 : Undertile membrane ASTM E84 Class 1 Fire rating m² .K/W = 0.59 (R Value) RESIDENTIAL APPLICATIONS: (INSULATION RADIANT BARRIERS) Envirotuff 200 : Double sided aluminium/mpet insulation SABS & SANS 10177-5/10. ASTM E84 Class 1 Fire Rating m² .K/W = 0.8 (R Value) Envirotuff 201 : Single sided aluminium/woven PE insulation SABS & ASTM E84 Class 1 Fire Rating m² .K/W = 0.8 (R Value) Envirotuff 202FR : Double sided alu/woven PE/alu insulation SABS & SANS 10177-5/10. B/B1 fire rating. m² .K/W = 1.2 (R Value) COMMERCIAL/INDUSTRIAL APPLICATIONS: (INSULATION RADIANT BARRIERS) Envirotuff 203FR : Double sided aluminium SABS & SANS 10177-5/10/11 B/B1/2/H only USP fire rating. m² .K/W = 1.2 (R Value)

SANS 10400 XA / SANS 428 compliance information

SABS : SOUTH AFRICAN BUREAU of STANDARDS SANS : SOUTH AFRICAN NATIONAL STANDARDS TIASA : THERMAL INSULATION ASSOCIATION of SOUTHERN AFRICA SANS 10400-A : 2010 Edition 3, National Building Regulation. The application of the National Building Regulations Part A: General principles and requirements. SANS 10400-XA : 2011, 9 November. Amendment to the New Building Regulation : Energy Usage In Buildings (XB and XC to follow) SANS 204 : 2011 : Energy Efficiency in Buildings referred to by 10400-XA. - to be tested in accordance with SANS 428 SANS 428 : The fire performance classification of thermal insulated building envelope systems. - To be tested in accordance with SANS 10177-5 / 10177-10 / 10177-11(com/ind)

Warranty Loss of light Transmission – 10 year Warranty

For a period of 10 years, the light transmitting properties of

TUFLITE® Corrugated UV sheets will not decrease by more

than 10% from their initial value when measured in accordance

with the test method specified in ASTMD 1003 – 1998. This

warranty applies from the date of original purchase and is valid

only to the original purchaser of the product (claims must be

accompanied by an original purchase receipt). The product

must have been stored, installed and cleaned in accordance

with the manufacturer’s recommendations.

Weather Breakage

For a period of 5 years, TUFLITE® Corrugated UV sheets

will not break or fracture as a result of the impact of hail

measuring up to 15mm in diameter. Damage caused by the

impact of objects other than hail is excluded from this

warranty. It is responsibility of the purchaser to obtain the full

warranty conditions. These are available from the distributor.

Any claim must be made to the distributor.

REDISCOVERING DAYLIGHT

10* Year Warranty

CORRUGATED Profiled Polycarbonate Sheet

TUFLITE®

TUFLITE® CORRUGATED TUFLITE® Corrugated UV Co-extruded profiled polycarbonate sheets have been engineered to suit industrial roof lighting and

daylight cladding applications for a wide array of specific needs. These include Industries, warehouses, commercial structures

and also residences. Sunlight is abundantly available during the daytime and TUFLITE® Sheets help you to conveniently

harness this boundless resource resulting in reduction of energy costs and reducing the effects of industrialization on the

environment. TUFLITE® Corrugated UV Sheets provide excellent impact resistance, a very wide range of light transmission

options and enhanced safety due to its excellent fire resistant (self extinguishing) properties. The co-extruded UV protective

layer ensures that the sheets have superior resistance to weathering and the mechanical & optical properties of the sheets

remain intact for an extended period of time. In a nutshell, TUFLITE® Corrugated UV sheets are 250 times stronger than glass,

suitable for extreme weather conditions and can be deployed for use in hostile chemical environments. TUFLITE® sheets are

corrosion resistant and offer near total protection from harmful Ultraviolet radiation of the sun.

TUFLITE® Corrugated UV sheets are available in clear transparent, embossed and textured options. Typical applications for

TUFLITE ® Corrugated UV sheets include roofing and cladding daylight panels in industrial sheds, warehouses and public

buildings, central atria in shopping malls, swimming pool roofs, greenhouses, verandas, pergolas, patio covers, awnings,

carports, gazebos and the list can go on...

Fire Retardant (Self Extinguishing)

TUFLITE® Corrugated UV sheets have an excellent

flammability rating (UL94 V-2), are self extinguishing and

suitable for use in areas prone to fire. These sheets do not

release toxic gases and are comparatively much less

flammable than GRP & Acrylic (PMMA) sheets.

Excellent Impact Resistance

TUFLITE® Corrugated UV sheets possess exceptional

impact resistance. Manufactured from high quality Bayer ®

polycarbonate resin, which has 250 times the impact

strength of glass and up to 40 times that of

Acrylic (PMMA) sheets of similar thicknesses. TUFLITE®

Corrugated UV sheets are virtually unbreakable.

Superior Clarity & Light Transmission

Clear TUFLITE® Corrugated UV sheets are as transparent

as glass and have a light transmission of 90%. These

sheets are also available in translucent configuration for

better light diffusion.

Weather Protected

TUFLITE® Corrugated UV Co-extruded sheets possess a

special Ultraviolet barrier, which cuts off 99.9% of sun’s

harmful ultraviolet radiation. This protection ensures

zero damage to UV sensitive products like furnishings and

upholstery, paint, carpets and also prevents harm to the

human skin. Further, this UV layer is co-extruded and

hence cannot peel or delaminate from the sheet, ensuring

long term durability and sustained weather protection.

Design Flexibility

TUFLITE® Corrugated UV sheets can be cold curved in

both directions. That is parallel or perpendicular to the line

of corrugation. This offers design flexibility to install these

sheets over curved roofs or walls (Radius of

curvature will be defined by the profile and thickness of

sheet to be used).

Broad Range Temperature Resistance

TUFLITE® Corrugated UV sheets remain stable under

extreme climatic conditions, remaining virtually unchanged

between temperatures of -40ºC and +120ºC. This signifies

that the sheets can perform below freezing point and above

boiling point of water. Adequate allowance needs to be

made for thermal movement in the fixing arrangement.

Better Heat / Thermal Insulation

TUFLITE® Corrugated UV sheets exhibit better

insulation values against heat or cold when compared

to glass or GFRP sheets.

Handling With Ease

Due to their relatively light weight and high impact

strength, TUFLITE® Corrugated UV sheets are

convenient to store, handle and install. Conventional

tools can be used to cut, trim or drill holes in the sheets.

Chemical Resistance

TUFLITE® Corrugated UV sheets are resistant to a

wide range of chemicals. They are generally unaffected

by acids, alcohols, glycols, mineral oils, animal and

vegetable fats, kerosene and non-abrasive cleaners.

However, they are affected by benzene, petrol, ketones,

acetones, phenols, chlorinated and aromatic

hydrocarbons, petroleum based paints, abrasive

cleaners and solvents. For more information contact

your distributor for a data sheet.

Simple Maintenance

Clean using a mild detergent and warm water. Use a

soft sponge. Rinse thoroughly with clean water.

TUFLITE® Corrugated UV Warranty

TUFLITE® Corrugated UV sheets are backed by a 10

year warranty against loss of light transmission and a 5

year warranty against hail breakage. Provided that all

installation conditions are satisfied, these warranties will

be honoured anywhere in the world where TUFLITE®

Corrugated UV sheets are sold.

Product Range

Product TUFLITE® (UV1)

Description: Corrugated Polycarbonate sheet with One

side UV Coating

Product TUFLITE® Plus (UV2)

Description: Corrugated Polycarbonate Sheet with

both sides UV Coating.











Weather Breakage

For a period of 5 years, TUFLITE® Corrugated UV sheets will

not break or fracture as a result of the impact of hail

measuring up to 15mm in diameter. Damage caused by the

impact of objects other than hail is excluded from this

warranty. It is responsibility of the purchaser to obtain the full

warranty conditions. These are available from the distributor.

any claim must be made to the distributor.

10* Year Warranty

TUFLITE® SOLID SHEETS Through Scorching summers, Torrential rains and Freezing winters, the high impact resistant TUFLITE® Solid Polycarbonate

sheets can withstand the extremities of weather. TUFLITE® combines a unique combination of features, allowing a wide range

of applications in the modern world.

Polycarbonates are one of the most advanced polymers, in the field of Plastics today. They offer unequalled mix of desirable

properties like High impact strength, Transparency, Light weight, Flexibility, Durability, Thermal resistance & Fire resistance.

Fire Retardant (Self Extinguishing)

TUFLITE® Solid sheets have an excellent flammability rating

(UL94 V-2), are self extinguishing and suitable for use in areas

prone to fire. These sheets do not release toxic gases and are

comparatively much less flammable than GRP & Acrylic (PMMA)

sheets.

Excellent Impact Resistance

TUFLITE® Solid sheets possess exceptional impact resistance.

Manufactured from high quality Bayer polycarbonate resin, which

has 250 times the impact strength of glass and up to 40 times that

of Acrylic (PMMA) sheets of similar thicknesses. TUFLITE® solid

UV sheets are virtually unbreakable.

Superior Clarity & Light Transmission

Clear TUFLITE® Solid sheets are as transparent as glass and

have a light transmission of 90%. These sheets are also available

in translucent configuration for better light diffusion.

Weather Protected

TUFLITE® Solid sheets possess a special Ultraviolet barrier,

which cuts off 99.9% of harmful ultraviolet radiation. This

protection ensures zero damage to UV sensitive products like

furnishings and upholstery, paint, carpets and also prevents harm

to the human skin. Further, this UV layer is co-extruded and hence

cannot peel or delaminate from the sheet, ensuring long term

durability and sustained weather protection.

Design Flexibility

TUFLITE® Solid sheets can be cold curved in both directions.

That is parallel or perpendicular to the line of extrusion. This offers

design flexibility to install these sheets over curved roofs or walls

(Radius of curvature will be defined by the thickness of sheet to be

used).

Broad Range Temperature Resistance

TUFLITE® Solid sheets remain stable under extreme

climatic conditions, remaining virtually unchanged between

temperatures of -40ºC and +120ºC. This signifies that the

sheets can perform below freezing point and above boiling

point of water. Adequate allowance needs to be made for

thermal movement in the fixing arrangement.

Better Heat / Thermal Insulation

TUFLITE® Solid sheets exhibit better insulation values

against heat or cold when compared to glass or GRP sheets.

Handling With Ease

Due to their relatively light weight and high impact strength,

TUFLITE® Solid sheets are convenient to store, handle and

install. Conventional tools can be used to cut, trim or drill

holes in the sheets.

Chemical Resistance

TUFLITE® Solid sheets are resistant to a wide range of

chemicals. They are generally unaffected by acids, alcohols,

glycols, mineral oils, animal and vegetable fats, kerosene

and non-abrasive cleaners. However, they are effected by

benzene, petrol, ketones, acetones, phenols, chlorinated and

aromatic hydrocarbons, petroleum based paints, abrasive

cleaners and solvents. For more

information contact your distributor for a data sheet.

Simple Maintenance

Clean using a mild detergent and warm water. Use a soft

sponge. Rinse thoroughly with clean water.

TUFLITE® Solid Sheets Warranty

TUFLITE® Solid sheets are backed by a 10 years warranty

against loss of light transmission and a 5 years warranty

against hail breakage. Provided that all warranty conditions

are satisfied, these warranties will be honoured anywhere in

the world where TUFLITE® Solid sheets are sold.

Product Range

Product Description

TUFLITE®- e Solid Polycarbonate sheet with UV Stabilisers

TUFLITE® Solid Polycarbonate sheet with UV Co-extrusion on one side

TUFLITE® EMBOSSED Textured Polycarbonate sheet with UV co-extrusion one side

TUFLITE® Plus Solid & Embossed Polycarbonate sheet with both sides UV co-extrusion

TUFGARD Abrasion resistant Polycarbonate sheets Both Sides











Weather Breakage

For a period of 5 years, TUFLITE® Corrugated UV sheets will

not break or fracture as a result of the impact of hail measuring

up to 15mm in diameter. Damage caused by the impact of

objects other than hail is excluded from this warranty. It is

responsibility of the purchaser to obtain the full warranty

conditions. These are available from the distributor. Any claim

must be made to the distributor.

10* Year Warranty

TUFLITE® MULTIWALL SHEETS

Technical Data

UV protection

Values mentioned are based on Polycarbonate Resins as

stated in literature TUFLITE® multiwall sheets restrict the

transmission of more than 99.9% of harmful UV radiation from

sunlight. The co-extruded UV barrier protects the sheet from

physical degradation and discoloration. The sheets remain

stable under extreme temperature conditions (-40ºC to +

120ºC).

Fire Performance

TUFLITE® Multiwall is suitable for use in areas prone to fire

hazards. Inherently the sheets are self extinguishing and do not

aid flame spread. These sheets conform to most international

standards on fire retardance. TUFLITE Multiwall sheets do not

release toxic fumes and hence pose no hazard to human life in

case of fire.

Wind Load

TUFLITE® Multiwall sheets are suitable for use in high wind

load areas. Please visit our website for further details and

specific installation instructions.

Handling, Storage and Cleaning

Store sheets on a flat surface (with the longest length at

the bottom) Ensure sheets are not stored in direct sunlight

when stored in a stack; sunlight may cause the sheet to

heat up and distort. Masking film may be difficult to

remove. Ensure sheets are protected against atmospheric

conditions Use timber bearers to support sheets

Rinse sheet with lukewarm water. Wash with mild soap or

detergent and a soft cloth or sponge. Hose down

thoroughly. Dry with soft cloth to prevent water marks.

Do not allow moisture to enter the flutes.

Chemical Resistance

TUFLITE® Multiwall is affected by: benzene, petrol,

ketones, acetone, phenols, chlorinated and aromatic

hydrocarbons, and petroleum based paints, abrasive

cleaners and solvents.

Properties Characteristics Value Measurement Standard

Mechanical

Yield stress

Stress at Break

Yield Strain

Strain at Break

Tensile Modulus

Impact strength

Izod Notched

Hardness

Physical

Density

Refraction Index

Moisture Absorption

Thermal

Linear thermal expansion

Thermal Conductivity

VICAT Softening Point

HDT

Service Temp

Mechanical

66 70

6.2

120

2200

80

90

110

1.2

1.58

0.30

0.65

0.20

146

137

-40 to +120

Mpa

Mpa

%

%

Mpa

kJ/m2

kJ/m2

N/mm2

g/m3

n

%

10-4/K

/(m-K)

C

C

C

ISO 527

ISO 527

ISO 527

ISO 527

ISO 899

ISO 7391

ISO 180

ISO 180

ISO 1183

ISO 489

ISO 62

ISO 11359

ISO 8302

ISO 306

ISO 75

Rhino Plastics Warehouse in Johannesburg Daylight harvesting – Polycarbonate + LED lighting

Old lighting system = 18 high bays (400w each) x 8 hours/day (22 days/month) = 1267kw / month

x 24 hours/day (22 days/month) = 3802kw / month

New LED system + polycarbonate = 18 LED high bays (40w each) x 8 hours/day (22 days/month) = 127kw / month

x 24 hours/day (22 days/month) = 380kw / month

Using Polycarbonate sheeting you can potentially reduce your lighting usage from 50% – 90%.

Residential

Double Glazing Solutions in Accordance with SANS 10 400XA and SANS 204

Industrial

Commercial

Double Glazing Solutions – Technical Data to Assist with Compliance to SANS 10400XA and SANS 204

Rainwater Harvesting and Water Storage

Industrial and Large Scale Solutions

Commercial Solutions

Agricultural Solutions

Residential, Industrial and Agricultural Solutions

Bury the digester in a 3 m x 3m hole Connect up to grey and/or black water system

Connect digester up to gas user point eg: kitchen stove or water heater

Backfill hole with cement stabilized sand filling with waste water at the same time

Only the top 50 cm of the 2 manhole covers are visible above the ground Prime with cow manure, stir and 3 weeks later start feeding with organic waste i.e. all your - kitchen waste excluding bones, - all your garden waste excluding branches, - all animal manure and sewage (optional)

Cook on a biogas appliance Cover flow to a reed bed, the sewer or a soak away. If no black water (sewage) is involved, use the overflow water for irrigation. It is rich in bio-available nutrients that will benefit your garden.

Bio Digester Systems

Minimal level of gas in gas compartment

Intermediate level of gas in gas compartment

Maximum level of gas in gas compartment

Biogas

Effluent Treatment (Blackwater) from Single Household, Game Lodge, Town House Project to Shopping Complexes

Membrane Bioreactor Systems Permanent Water Treatments Solutions Housing complexes,

Townhouses. Lodges, Resorts etc.

STEP 1 : PUMP STATION : where all sewage and waste water is collected from the settlement. STEP 2 : BIOREACTOR TANK : where nitrification and denitrification takes place. STEP 3 : CLARIFICATION TANK : where sludge settles at the bottom of the tank & the clear water is separated at the top. STEP 4 : STERILIZATION TANK : where the clear water is treated either by Ozone or Ultraviolet and is now ready for recycling.

http://www.ozonize.co.za/products/biozone-purifiers/mbr-membrane-bioreactor-systems/leadImage/image_view_fullscreen

Water Purification Systems

Sand Filtration

UV Sterilization

Carbone Filtration

Reverse Osmosis

Ozone Water Treatment

Spas & Jacuzzi

Commercial Kitchens

George Laundry

Residential Kitchens

Anglo Plats Modikwa Mine

Midvaal Water Treatment Works Plettenberg bay

Plettenbergbay/Midvaal SASOL Ushaka Island Aquarium

L’Oreal

Ozone Air Treatment Systems

Hotel Room E.G Soccer City Stadium

ICU Hospital General Wards Gym

Forensic Pathology Mortuaries

Casino Ducting - Smoking Areas

Offices

Kitchens Butcheries

Solar Water Heating and Heat Pump Solutions to Comply with New SANS 10400XA Building Regulations that makes it Mandatory to Heat at Least

50% of All Hot Water in All New Buildings

Flat Plate Solar Water Heating

Evacuated Tube Solar water Heating

Heat Pumps for Residential and Industrial Water Heating

Swimming Pool Heating

Solar PV and Hybrid Systems

PV Solutions for Business

UPS Solutions for Business and Residential

Hybrid Systems, PV and Wind

PV Solutions for Residential and Lodges

(C.S.P) Concentrated Solar Power Options

Solar Car Park Options

Biogas Options

Roof Top Solar Options

Solar Farms

LED Lighting Solutions Saves up to 90% of Energy Consumed

LED Solutions Residential

LED Solutions Commercial

LED Specifications

Energy Efficiency

& Energy Costs

Light Emitting Diodes Incandescent Compact Fluorescents

(LEDs) Light Bulbs (CFLs)

Life Span (Average) 50,000 hours 1,200 hours 8,000 hours

Watts of Electricity used

(equivalent to 60 watt bulb). LEDs use less power (watts) per

unit of light generated (lumens .)

6- 8 Watts 60 Watts 13 - 15 Watts

LEDs help reduce greenhouse

gas emissions from power plants and lower electrical bills

Kilo-watts of Electricity used

(30 Incandescent Bulbs per year 329 KWh/yr 3285 KWh/yr 767 KWh/yr

equivalent)

Annual Operating Cost

(30 Incandescent Bulbs per year $32.85/year $328.59/year $76.65/year

equivalent)

Environmental Impact Light Emitting Diodes Incandescent Light Compact Fluorescents

(LEDs) Bulbs (CFLs)

Contains the TOXIC Mercury No No Yes - Mercury is very toxic to

your health and the environment

RoHS Compliant

Yes Yes No - Contains 1mg - 5mg of Mercury and is a major risk

to the environment

Carbon Dioxide Emissions (30 bulbs per year)

451 pounds/year 4500 pounds/year 1051 pounds/year

Lower energy consumption decreases:

CO2 emissions, sulfur oxide, and high- level nuclear waste.

Light Output Light Emitting Diodes

(LEDs) Incandescent Light

Bulbs Compact Fluorescents

(CFLs)

Lumens Watts Watts Watts

450 4 - 5 40 9 - 13

800 6 - 8 60 13 - 15

1,100 9 - 13 75 18 - 25

1,600 16 - 20 100 23 - 30

2,600 25 - 28 150 30 - 55

Irrigation and Water Solutions

Water Features and Dam Installations

Agricultural and Industrial Dams

Dams with Floating Covers

Under Floor Heating Solutions

Systems with Radiators Radiators distribute heat by convection currents, which can result in draughts and hot spots. The floor will be the coldest zone of the room, as hot air rises, and the space above your head will be the warmest part of the room. Radiators transfer heat into a room largely by convection from a hot metal surface. Because the surface of the radiator is small, in comparison to the volume of the room, it needs a high heat input and doesn’t spread the heat evenly. Convection currents circulate allergens, dust particles, fumes and germs which are then distributed around the building, contributing to an unhealthy atmosphere.

Underfloor Heating Underfloor heating systems are simple to install, low maintenance and cost-effective to run. The room is heated by radiation, the most natural and comfortable form of heating, creating an even, comfortable environment with no hot or cold draughts. Rooms with high ceilings such as churches, sports halls or industrial units gain even greater benefits. With radiator systems, some of the heat is immediately wasted as it rises to the ceiling. With an underfloor heating system, the heat is concentrated at floor level where it is most needed. In rooms with large areas, underfloor heating is the only way to heat the centre of the floor area effectively.

Floor Surface Temperatures Floor surface temperatures should not exceed certain levels otherwise discomfort and damage to the floor can occur. The maximum recommended temperatures are : occupied areas, 29°C, peripheral areas, 35°C, bathrooms, 33°C. The floor surface temperature will vary according to the heat output requirements of the room or building.

Floor Coverings Floor coverings such as carpet, underlay and timber reduce the floor heat output. Please check with us to confirm suitability. Some floor coverings, especially timber and vinyl floors, have a recommended maximum floor surface or sub floor temperature that they can operate at; if a higher temperature is used it can damage the floor covering. Manufacturers data sheets should be checked to confirm the coverings suitability.

Under Floor Heating Systems Cross Section Examples of Different Systems

Raufix system – Floor covering, 75mm screed, edge insulation, UFH pipe, Raufix rail, subfloor

Tacker sheet system – Floor covering, 75mm screed, edge insulation, UFH pipe, Tacker Sheet, subfloor

Industrial floor heating – Floor covering, 75mm screed, edge

insulation, UFH pipe, Tacker sheet, subfloor

Thermally Activated Building Structure (TABS) – Concrete

structure with PE-Xa integrated within the slab

Diffusion plate system – Floor covering , chipboard, UFH pipe,

aluminium plate, insulation, joist hanger

Floating floor system – Floor covering, dry floor element, edge insulation, UFH

pipe, foil faced pre-routed panel, insulation, PE membrane, subfloor

Sprung floor – Floor covering, dry floor element, edge insulation, UFH pipe, foil faced pre-routed panel, insulation, PE

membrane, subfloor

The Natural Way to Stay Cool

The transference of heat energy through radiation is a much more gentle and natural way for the human body to cool

down. Combine this with the even room temperature of a concrete core tempered building and the result is a more

comfortable environment for all occupants, even at slightly increased room temperatures.

Less Infrastructure

A building using concrete core tempering only needs a small

air conditioning system to remove peak heat loads, dehumidity the air (to avoid condensation on cold floors and

ceilings), and to supply fresh air. The main cooling load is covered by the concrete core tempering system, allowing for reduced air exchange rates, air handling units, ducts or fans.

Awadukt Thermo ground-air heat exchanger is providing to be a popular choice for the residential

sector, particularly in combination with a mechanical ventilation heat recovery unit (MVHR). It exploits the

natural temperature of the earth by drawing ventilation air through underground pipes, buried at 1.5m deep. This pre-heats the air in the winter and

pre-cools the air in the summer, offering a simple but effective way of saving energy. For a standard house,

around 40-60m of DN200 pipe is required.

Operation principle of the ground air-heat exchanger in summer Operating principle of the ground air-heat exchanger in winter

The transfer is much more effeciant by water in comparison to air, with the storage capacity of thermal energy for water a thousand-fold higher per unit of volume than of air

Benefits of Under Floor Heating

Energy Efficiency • Underfloor heating is the most energy

efficient way of transferring heat into a room and can consistently deliver substantial energy savings compared to radiator systems.

• Because underfloor heating systems benefit from the use of lower water temperatures throughout the system (rather than hot water in radiator systems), condensing boilers can generally run at greater efficiency, saving even more energy costs.

• By providing a constant heat, underfloor heating allows occupants to feel more comfortable at a lower temperature.

Interior Design • Out of sight, underfloor heating gives a total

flexible layout, with no radiators to limit interior designs and furniture arrangement.

• Underfloor heating is compatible with most types of floor covering. The interior designer has more freedom to specify most types of floor covering whether it be tiles, wood, laminates or carpets.

• Even though it can’t be seen, underfloor heating adds perceived value to the property.

Health & Safety • Underfloor heating systems eliminate

radiators (which can potentially be a health and safety risk because of their high surface temperatures and sharp edges).

• Moisture levels in floor coverings are reduced, which reduces microbiological growth and the risk of slipping. In carpets it virtually eliminates dust mites.

• As there is no convection driven airflow, and the circulation of bacteria and pollen is reduced, the indoor air quality is cleaner and healthier.

Construction Accessories

Geyser Blanket Up to 28 % Savings on Heat

Loss

Speedymask

Polycarb Burglar Proofing

Plastic Joining Tape & Aluminium Insulation Joining

Tape

Polywire for Supporting Insulation

Polycarb Burglar Proofing

Skyvent Roof Turbine

Butyl Sealant Tape

Profiled Polyclosures Polycarbonate Profiled Flashings

Polycarbonate Skytile

Hex Magnetic Socket Class 3 & 4 Steel &

Timber Fixings

HEAD OFFICE ADDRESS P.O BOX 4241, KORSTEN, PORT ELIZABETH, 6014 · 15 VOYLE STREET, SYDENHAM, SOUTH AFRICA

TEL:+27 41 451 3197, FAX:+27 41 451 2223 · E-MAIL: [email protected]

RHINO WESTERN CAPE – CAPE TOWN Postal Add: PO Box 108, Eppingdust 7475 Physical Add: 17 Textile Rd, Parow Industria Tel: 021 – 932 6601 Fax: 021 – 932 6651 E-mail: [email protected]

RHINO PLASTICS & AGENT CONTACT DETAILS

RHINO PLASTICS – JOHANNESBURG Postal Add: PO Box 13129, Whitfield 1467 Physical Add: 20 Duncan Street, Lillianton, Boksburg 1000 Tel: 011 – 826 5411 Fax: 011 – 826 4290 e-mail: [email protected]

RHINO PARK – EAST LONDON STORE Physical Add: Robbie de Lange Road, Wilsonia, East London Tel: 043 – 745 0024 Fax: 043 – 745 2108

E-mail: [email protected]

RITSELF 2 (PTY) LTD T/A COMMODITY SALES Postal Add: PO Box 11131, Southernwood 5213 Physical Add: 3 Leo Ladin, Wilsonia, East London Tel: 043 – 745 1223 (Ask for Fax)

INGS AGENCIES - BLOEMFONTEIN Postal Add: PO Box 84, Bloemfontein 9300 Physical Add: 8 Barlon Street, Hilton, Bloemfontein Tel: 051 – 448 2583 Fax: 051 – 447 8981

E-mail: [email protected] (Isabel Sales)

MARCONICOR / HEIDELCOR - HEIDELBERG Postal Add: PO Box 341, Heidelberg 2400 Physical Add: 8 Bunsen Street, Heidelberg, Gauteng Tel: 016 – 341 6130 Fax: 016 – 349 1096


CAMPBELL PLASTICS - NELSPRUIT Postal Add: PO Box 644, Nelspruit 1200 Physical Add: Block D1, Axis Park, Wilkens Road, Rocky Drift Tel: 013 – 758 1243 Fax: 013 – 758 1243 (Ask for Fax)


IMPI WIRE - GEORGE Postal Add: PO Box 1848, George 6530 Physical Add: 14 Foundry Street, George Tel: 044 – 802 7301 Fax: 044 – 802 7373


TONY TURNER AGENCIES Postal Add: PO Box 4212, Pietersburg 0900 Physical Add: 19 Latrium Street, Ladium, Ext 16, Pietersburg Tel: 015 – 293 1414 Fax: 015 – 293 1072 E-mail: [email protected]

TUNNELQUIP - DURBAN Postal Add: PO Box 338, Hilton3245 Physical Add: Unit 14 Kondi Park, 31 Portland Road, Mkondeni, Pietermaritzburg Tel: 031 – 701 1635 Fax: 031 – 701 9345


A.D. ENTERPRISES – GABARONE BOTSWANA Postal Add: Private Bag 149 suite #53, Postnet, Kgaleview, Gabarone Physical Add: Plot 53/71, Gabarone, International, Commercial Park, Botswana Tel: 00267 – 318 6362 Fax: 0067 – 318 6364


GREENCON Physical Add:1 Avon Rise, Avondale, Harare, Zimbabwe Postal Address: PO Box BW597, Barrowdale, Harare, Zimbabwe Cell: 00263 – 912 204 941 E-mail: [email protected]

10

2

8

9

1

2

11

3

4

5

6

7

TAGGIT Postal Add: PO Box 51386, Musgrave RD Physical Add: 107 Monzi, 319 Clark RD, Glenwood, Durban

Tel: 031 – 201 8747 Fax: 031 – 241 1047 E-mail: [email protected]

TEL:+27

mailto:[email protected]







greenbuilding solutions

Documents