graissage silenblocs chassis
DESCRIPTION
Graissage et lubrification des silenblocs avec la graisse fournie .TRANSCRIPT
PO Box 5666, Minto, NSW, 2566 AustraliaPh: 61 2 9603 0111 Fax: 61 2 9820 2500
E-mail: [email protected]. 93 051 207 535 Code: 261
Warning: Please drive carefully while you accustom yourself to the changed vehicle behaviour.
Application:
For ease of installation and correct positioning of Polyurethane bushes:
1. Remove rubber bush and clean all traces of rubber from the housing.
2. Grease the inside of the bush housing, grease the outside of the bush and then
press the bush into the housing.
3. Grease the inside of the bush grease the outside of the crush tude then press
crush tube into bush.
4. Grease each end of the bush and the mating metal components.
Fitting:
Draft Fitting
Instructions
W0564