car chassis, body & nerfs • sprint car chassis, body & ne · sis, body & nerfs • sprint car...

275

Car Chassis, Body & N

erfs • Sprint Car Chassis, Body & N


erfs • Sprint Caar CChaaasssiss,BBooddy && NNN

errrfss• SpprrrinnntCCCaar Chassis, Body & N

erCalifornia Residents see page 367 Visit us at 5170 N 125th St. Butler WI 53007 or online at www.behlingracing.com

RACE PROVEN WINNER and still at least $1,000 less than the others!!!!! With extras and safety options included at our standard price, XXX is the right choice for any level of Sprint Car Racer! Not just because the price is aff ordable, but we feel these chassis off er greater driver protection, and safety is one of our highest priorities. • Included Options: Drive Hoop, Th rottle Stand, Wing Spuds (two on each side), Safety Halo (included but not welded into the chassis), Left Side Safety/Sissy Bar• Chassis is complete and ready to race for this price • Halo can be welded in for a small fee• Chassis can be ordered with halo welded in for nominal cost• Off ered in 87”/40” or 88”/40” chassis (specify when ordering)• X-Wedge chassis is 2” taller in rear• Weighs only 195 lbs with Halo• Made of 4130 chromoly• Delivery cost averages $300 - $500

Body & Tin Kit includes “Race Ready Chassis” Hood, Nose, Arm Guards, Kick Panels, Floor Pan, Dash and Front Air Scoop.

Chassis• Included Options: Drive Hoop, Th rottle Stand, Wing Spuds (two on each side), Safety Halo (included but not welded into the chassis), Left Side Safety/Sissy Bar• Chassis is complete and ready to race for this price• Halo can be welded in for a small fee• Chassis can be ordered with halo welded in for nominal cost• Off ered in 87”/40” or 88”/40” chassis (specify when ordering)• X-Wedge chassis is 2” taller in rear • Weighs only 195 lbs with halo• Made of 4130 chromoly• Delivery cost averages $300 - $500

XXX “Racer Kit” includes Body & Tin Kit plus Motor Plate, Torsion Arms, Bumpers, Nerf Bars and Front Axle.

Chassis• Included Options: Drive Hoop, Th rottle Stand, Wing Spuds (two on each side), Safety Halo (included but not welded into the chassis), Left Side Safety/Sissy Bar• Chassis is complete and ready to race for this price. • Halo can be welded in for a small fee• Chassis can be ordered with halo welded in for nominal cost• Off ered in 87”/40” or 88”/40” chassis (Specify when ordering)• X-Wedge chassis is 2” taller in rear• Weighs only 195 lbs with halo• Made of 4130 chromoly• Delivery cost averages $300 - $500

Description 87” Wheel Base 88” Wheel Base PriceX-Wedge chassis (2” Taller in rear) 813-SC-CH-1000-872H 813-SC-CH-1000-882H 1990.00

Description 87” Wheel Base 88” Wheel Base PriceX-Wedge (2” Taller in rear) 813-SC-CH-1001-872H 813-SC-CH-1001-882H 2777.45

Description 87” Wheel Base 88” Wheel Base PriceX-Wedge (2” Taller in rear) 813-SC-CH-1003-872H 813-SC-CH-1003-882H 3462.99

276

Car C

hassssis,,,

BoBBydy

&&NNN

ereefsf

•SSprp

init t

aaCaCr

hChCasa

sis, B

ody

& N

erfs

• Spr

int C

ar C

hass

is, B

ody

& N

erfs

• Spr

int C

ar C

hass

is, B

ody

& N

erfs

• Spr

int C

ar C

hass

is, B

ody

& N

er

Call 800-255-4117 or 262-783-7474 for Current Pricing! Fax us 24hr at 262-783-6293 California Residents see page 367

For nearly 45 years, Jack Elam has been manufacturing race cars. Th e dedication to quality craft smanship, attention to detail and willingness to build exactly what his customers ask for have helped J&J Auto Racing succeed today. Jack and the entire staff are excited to work with you and help get you and your team on the winning track. • Made only with USA 4130 chromoly • Built by long term employees that care about what they build• J&J believes in safety through quality• Will customize to your liking• Track Proven• Made in the USA

• Fits XXX and alike chassis• Dual Duct Inlet • Brings cool ait in evenly to injectors• Middle louver help remove air from radiator• Quality fi berglass• Tough gel coat• White or Black

• Fits XXX and alike chassis• Dual Duct Inlet • Brings cool air in evenly to injectors• Middle louver helps remove air from radiator• Quality fi berglass• Tough gel coat• White or Black

• Fits XXX and alike chassis• Dual Duct Inlet • Brings cool air in evenly to injectors• Middle louver helps remove air from radiator• Quality fi berglass• Tough gel coat• White or Black

Chassis Black White PriceStandard 813-SC-BW-0075-BLK 813-SC-BW-0075 83.99






• Fits XXX and alike chassis• Dual Duct Inlet • Brings cool air in evenly to injectors• Middle duct helps remove warm air from behind radiator• Quality fi berglass• Tough gel coat• White or Black• Works with alum dash 813-SC-BW-0008

• Made to fi t inside the down tubes• Fits XXX and alike chassis• Dual Duct Inlet • Brings cool air in evenly to injectors• Middle duct helps remove warm air from behind radiator• Quality fi berglass• Tough gel coat• White or Black• Works with dash 813-SC-BW-6447/BLK

• Fits XXX and alike chassis• Dual Duct Inlet • Brings cool air in evenly to injectors• Middle duct helps remove warm air from behind radiator• Quality fi berglass• Tough gel coat• White or Black• Works with dash SC-BW-6447/BLK

Call for prici

ng on

Chassis kits

& options

277







• 2012 body style• Quality hand laid fi berglass• Tough gel coat• White • Other colors available by request• Made in the USA

358-101022NXC 296.00 358-101022NXN 98.75

• 2012 body style• Quality hand laid fi berglass• Tough gel coat• White • Other colors available by request• Fits inside the down tubes• Made in the USA

• Fits XXX and alike chassis• Quality hand laid fi berglass• Tough gel coat• White or Black• Popular RS “Wedge” style arm guard• Fits car with safety bar

• 2012 body style• Quality hand laid fi berglass• Tough gel coat• White or Black• Popular RS “Wedge” style arm guard• Fits car with safety bar• Made in the USA

• Fits XXX and alike chassis• Quality hand laid fi berglass• Tough gel coat• White or Black• RS “Flat” style arm guard

Chassis Black White PriceStandard 813-SC-BW-0053-BLK 813-SC-BW-0053 95.99X-Wedge 813-SC-BW-0061-BLK 813-SC-BW-0061 95.99



Chassis White PriceStandard White 813-SC-BW-3827 65.00Standard Black 813-SC-BW-3827-BLK 65.00X-Wedge White 813-SC-BW-4295 65.00X-Wedge Black 813-SC-BW-4295-BLK 65.00

• Fits XXX and alike chassis• Works with popular safety bar option• Quality hand laid fi berglass• Tough gel coat• White or Black

• Fits XXX and alike chassis• Fits cars without safety bar• Quality hand laid fi berglass• Tough gel coat• White or black

• Fits XXX and alike chassis• Fits cars with safety bar• Quality hand laid fi berglass• Tough gel coat• Made in the USA

• Fits XXX and alike chassis• Fits cars without safety bar• Quality hand laid fi berglass• Tough gel coat• Made in the USA

358-101022NX12 132.00

358-10102212XL 103.50 358-101022AP 82.00

278

Car C

hassssis,,,

BoBBydy

&&NNN

ereefsf

•SSprp

init t

aaCaCr

hChCasa

sis, B

ody

& N

erfs

• Spr

int C

ar C

hass

is, B

ody

& N

erfs

• Spr

int C

ar C

hass

is, B

ody

& N

erfs

• Spr

int C

ar C

hass

is, B

ody

& N

er


813-SC-BW-0008 43.99

813-SC-BW-0702 14.99

• Comes complete with dzus springs• Dzus holes pre cut to fi r• Easy removal for washing car• Simple one piece design• Laser Cut

• Made to work with 12x inside rail hood• Hand laid Fiberglass• White• Other colors available by request• Made in the USA

358-101022NCL 103.50

• Aluminum dash pre-fi t for throttle pedal• 90 degree top lip• Dzus holes not drilled• Easy to install • Fits most chassis• .040” Th ick• Lightweight yet durable • Laser cut to be exact every time• Will last many seasons.

• High quality Fiberglass• Fits the “Dual Duct Inside Th e Rail” hood• Gel-Coated black or white• Recessed for the MSD box and gauges• Th rottle stand hole pre cut• Rails built in to hold hood dzuses• For use with inside the rail nose & hood Hood: 813-SC-BW-6837/BLK Nose: 813-SC-BW-6119/BLK

Description Part Number PriceWhite inside the rail dash 813-SC-BW-6447 112.99Black inside the rail dash 813-SC-BW-6447-BLK 112.99

Much like our tach mount, the gauge mount allows easy removal to

change gauges or for washing at the shop

MSD ignition box mount allows easy remove/change ignition box or for

washing the car at the shop

318-HRP8361 7.00318-HRP8360 12.50

• Conveniently mounts MSD, Tach and Kill Switch• Aluminum plate with dzus holes and springs• Easily removes for washing the car• Utilizes the stock mounting holes • Tach and switch mount fl ush to back of dash• Small holes in the dash facilitates reading the tach and allowing the switch to poke through. • Clean and simple one piece design.

Description Part Number PriceMount for angled dash 813-SC-BW-0701 20.99Mount for fl at dash 813-SC-BW-0700 20.99

Size Part Number Price2-1/16” 726-DB206-225 11.992-5/8” 726-DB260-275 13.39

Must Ha

ve

Left Side Guard Right Side Guard

232-P601 8.99

• Isolates gauge from panel• No need for bolt-on bracket• Makes installation a snap

Description Part Number PriceLeft side radius rod guard 358-101018DX-L 56.40Right side radius rod guard 358-101018DX-R 56.40374-50070 8.99

Spray-and-shine protectant that sheds dirt, dust and mud while providing a glossy protective fi lm for a variety of surfaces.

Eff ectively sheds while cleaning and protecting painted surfaces, full decal wraps, and fi berglass panels.

279







• Saves body from wearing out Dzus hole• Can be used to repair old body• Laser cut .430” stainless steel• Pre-cut for 1/8” rivets • Dzus button hole has rolled edge• Ultra light and very rigid

Description Application Part Number PriceRaise Rail 15” ‘08 & newer XXX, Some Maxim 813-SC-BW-0013 56.99Raise Rail 18” ‘07 & Older XXX, Most Maxim 813-SC-BW-0007 48.99Std Rail 18” Fits Most Std Rail Maxim & alike 318-HRP8318 66.00J&J Chassis Fits most J&J and alike Chassis 318-HRP8318-JJ 66.00

Description Application Part Number PriceRaise Rail 15” ‘08 & newer XXX, Some Maxim 813-SC-BW-0016 82.99Raise Rail 18” ‘07 & Older XXX, Most Maxim 813-SC-BW-0018 82.99

Color Part Number PricePlain 112-PANBIGA6500 2.50Black 112-PANBIGABK6500 3.25

318-HRP8010 1.25 820-14 .79

820-7 .80

• Available in black • .500” grip • Aluminum

Don’t wait till your body is worn out! Th ese buttons hold your body tighter and help prevent the hole from wobbling out • Ultra light stainless steel

• .500” Grip • Aluminum fl ange

Large 1-1/8” Head

Rolled edge for added support

Ultra Light Stainless Steel

Check Out P

ages

19-22 For a c

omplete

listing of Dz

ues buttons,

springs, plat

es, and

Rivets

• Fits most Chassis unless specifi ed• Measured from Motor Plate to K-Brace• Designed to fi t chassis • .080” Alum fl oor pan• 4 Side wrap around for added strength

• Tapered Aluminum Heel Riser • 1’’ Tall x 4 1/2” Wide• Improves leverage and comfort• Non-skid top surface• Keeps your feet at the correct angle• Reduces fatigue in your legs and calves• Keeps optimal brake and throttle control

• Tapered Aluminum Heel Riser • 1 1/2’’ Tall x 4 1/2” Wide• Improves leverage and comfort• Non-skid top surface• Keeps your feet at the correct angle• Reduces fatigue in your legs and calves• Keeps optimal brake and throttle control

• Fits most Chassis unless specifi ed• Measured from Motor Plate to K-Brace• Designed to fi t XXX chassis and alike• .080” Alum fl oor pan• 4 Side wrap around for added strength• High sides work well with fi berglass side panels

High Sides

Description Right Side Left Side PriceUpper Panel White 813-SC-BW-0033 813-SC-BW-0031 44.99Upper Panel Black 813-SC-BW-0033-BLK 813-SC-BW-0031-BLK 44.99Lower Alum Panel 813-SC-BW-0032 813-SC-BW-0030 17.99

Description Part Number PriceLeft Side Raised Rail Panel 813-SC-BW-0005 31.992 Piece Right Side Kick Panel 813-SC-BW-0006 56.99

Fits Most Chassis • Fits XXX, Eagle, Maxim and alike chassis• Laser cut to fi t chassis• Not drilled for dzus button• Plain fi nish aluminum

Description Part Number PriceLeft Side Kick Panel 318-HRP8310 36.00Left Side Raised Rail Panel 318-HRP8309 36.00Right Side Kick Panel 318-HRP8311 36.00Right Side Long Kick Panel 318-HRP8313 42.00

813-SC-7297 16.99 813-SC-6335 16.99

280

Car C

hassssis,,,

BoBBydy

&&NNN

ereefsf

•SSprp

init t

aaCaCr

hChCasa

sis, B

ody

& N

erfs

• Spr

int C

ar C

hass

is, B

ody

& N

erfs

• Spr

int C

ar C

hass

is, B

ody

& N

erfs

• Spr

int C

ar C

hass

is, B

ody

& N

er


813-SC-CH-0003 49.99

358-101038 62.54

358-101038F 78.91

• Keeps mud and dirt from sticking. • Will not harm paint, plastics • Environmentally safe! • Makes 10 gallons• 1 quart

• Aluminum housing• Soft high density foam• Holds your knee safe during crash• Easily installed with Zip Ties (page 27)

232-P601 8.99

• Biodegradable • Citrus-based solvents • Spot remover • Dissolving paraffi n waxes• Parts degreaser and cleaner• Dissolving certain types of glues and adhesives• Removing ink from rollers and packaging machines• Removing tar and bituminous deposits from asphalt• 16oz can

717-0266 12.23 374-50010 5.39

• Foaming Degreaser• Will not harm paint• Just spray on and wipe off • Safely remove tire rubber, grease and oil from your car• Works great for cleaning up shop equipment and tools

Must Have!

Must Have!

Must Have!

Description Part Number PriceSprint Chrome Plated 747-910-55101-CHR 36.99Sprint Black Powder Coated 747-910-55101-BLK 36.99Midget Black Coated (moly) 318-HRP8069M 72.50

Description Part Number PriceSprint Chrome Plated 747-910-55100-CHR 39.99Sprint Black Powder Coated 747-910-55100-BLK 39.99

Description Part Number PriceDirect Mount Guard 284-KR-4000-UL 80.00Standoff Style Guard 284-KR-3000-UL 85.00

• Holds your knee safe during crash• Sold in pairs• Aluminum housing• Soft space age foam• Clamps included

• Made to work with GenII Steering Box• Aluminum frame• High density soft foam to protect your knee

• Universal air dam fi ts most chassis• .080” Aluminum • Laser cut and precision bent• Protects radiator and directs air

• Front panel is 25 5/16” x 6 3/16”• Tab extends 2 3/16” wide by 2 1/2” high • Wire dia .234 O.D.

• Heavy duty wrap around style• Front panel is 27” x 6-3/4”• Tab extends 2 3/16” wide by 2 1/2” high • Wire dia .234 O.D.

Standoff Style

Direct Style

Wraps Around cage for added safety

Description Part Number PriceSprint Knee Guard 394-99500 60.99Midget Knee Guard 394-99502 60.99

• Made to work with GenII Steering Box• Aluminum frame• High density soft foam to protect your knee

281







• Available in 1” aluminum or stainless steel• CNC Bent for exact fi t• Fits most sprint car chassis

• Oval design gives you added protection above and below normal bumper• Added vertical support• Made of 1” stainless steel• CNC Bent for exact fi t• Fits most sprint cars

• Double up construction gives you the most protection available• Added vertical supports• CNC Bent for exact fi t• Made of 1” tubing• Fits most sprint cars

747-910-73076 56.99

Description Part Number PriceAluminum Bumper 438-FB100 14.99Stainless Steel Bumper 438-FB100SS 22.99

Description Part Number PriceStainless Steel 747-910-73077 54.99Aluminum 813-SC-BN-8749 54.99

Description Part Number PriceStainless Steel 230-14BBK 7.99Mild Steel 230-14BBKE 5.99

Description Part Number PriceLeft Nerf Std Rail 747-910-73081 119.99Left Nerf Raised Rail 747-910-73082 119.99Right Nerf 747-910-73080 119.99

• Fits most sprint car chassis• Polished 1” stainless steel• CNC bent for exact fi t• Popular “shorty” nerf style

747-910-73078 99.99 747-946-16002 89.99 747-910-73072-POL 79.99

• High strength bumper protects fuel cell• Fits most Sprint Car Chassis• Polished 1” Stainless Steel• CNC Bent for exact fi t

• Polished 7/8” Stainless steel • Stealth bumpers include supports• Made to fi t chassis

• Polished 7/8” stainless steel • Popular 3 point design• Made to fi t chassis

• Polished 7/8” stainless steel • Heavy duty 4 point design• Made to fi t chassis

• Fits most sprint car chassis• Polished 1” stainless steel• CNC bent for exact fi t• Lightweight

• Polished 7/8” stainless steel • CNC Bent for exact fi t• Fits most midget chassis

659-STHMG100 17.99

• (14) 10-32 x 1-3/4” bolt • (14) Full lock nuts

Description Part Number Price XXX & Spike 747-950-6021 79.99Std Stealth 659-STHMG200 79.99Wide Stealth 659-STHMG201 79.99

Description Left Side Nerf Right Side Nerf PriceXXX & Spike 747-950-6034 747-950-6033 83.99Stealth (Most) 659-STHMG300 659-STHMG400 79.99

Description Left Side Nerf Right Side Nerf PriceXXX & Spike 747-950-6036 747-950-6035 95.99 Stealth (Most) 659-STHMG301 659-STHMG401 95.99

Description Part Number PriceLeft Nerf Std Rail 747-910-73071-L-POL 54.99Left Nerf Raised Rail 747-910-73074-POL 54.99Right Nerf 747-910-73071-R-POL 54.99

• Fits most sprint car chassis• Polished 1” stainless steel• CNC bent for exact fi t• Standard bumper with added support

• Fits most sprint car chassis• Polished 1” stainless steel• CNC Bent for exact fi t• Gussets on both sides• Extra brace top to bottom• A true battle bar

car chassis, body & nerfs • sprint car chassis, body & ne · sis, body & nerfs • sprint car...

Documents