grain processing complex

Grain processing complex

The grain processing complex with production capacity of up to 90 t/h is designed to process and disinfect seeds of grain crops after harvesting and to motorize loading and unloading works during the following production processes:

1. Wet disinfection of seeds of grain, legume and industrial crops to improve their sowing quality and to eliminate pathogenic agents transmitted

through seeds;

2. Loading and unloading of grain stores

3. Loading of grain onto transport vehicles

4. Mechanical shoveling (piling) outside during grain delivery from harvesters

5. Piling of grain delivered by transport vehicles outside from several hips into one pile

6. Separation of the light fraction of grain; One characteristic feature of the МZS-90-20-01 grain thrower is that it is possible to load grain stores up to 6 m high and form high piles on outside threshing floors

Type mobile

Productivity in one hour of the main operation time (loading wheat with bulk density of 7603 kg/m and at most 20% humidity onto transport vehicles on hard surface ground), t, up to

90

Cutting width, m 4

Weight without spare parts and packaging, not exceeding, kg 890+/-30

Overall dimensions,mm, not above:

Operation position— length x

— width x

— height x

Transport position

— length x

— width x

— height x

50503800

3600

3200

18702012

Operating speed km/h, up to From 0 to 0,35

Traveling speed in tow, km/h, at most 5

Drive Electric

Grain (wheat) flight distance from the pickup place, m, up to 6

Grain (wheat) dropping height, m, up to 6,6

Power consumption, kW, not exceeding 9,55

Technical specifications

Trimmer:

Tape width, mm 400+/-5

Lead drum speed, rpm 835

Tape speed, m/s, at least 14,2

Conveyor with feeders:

Number of conveyor drags 27

Number of feeder drags 30

Dimension of a drag, mm 100x260

Conveyor drag chain speed, m/s, not exceeding 1,7

Feeder drag chain speed, m/s, not exceeding 0,05

Drag installation interval in the chain, mm 228

Service life, years 7

Technical specifications

Advantages of the grain processing complex

1. The grain processing complex can operate in two modes: throwing and disinfecting.

2. In the throwing mode the grain processing complex is designed to motorize loading and unloading works during the following production processes:

Loading and unloading of grain stores.

Loading of grain onto transport vehicles.

Mechanical shoveling (piling) outside during grain delivery from harvesters.

Outside piling of grain delivered by transport vehicles from harvesters from several hips into one pile.

3. In the disinfecting mode the grain processing complex is designed to carry out wet disinfection of seeds of grain, legume and industrial crops.

4. One characteristic feature of the mobile grain processing complex is that it is possible to load grain stores up to 6 m high and form high piles on outside threshing floors.

5. The thrower trimmer can turn 135° towards both sides from the longitudinal axis of the frame so that the use of the grain processing complex is simplified and significantly extended to various operation:

continuous loading of grain onto transport vehicles;

even distribution of the grain during store loading;

to make grain piles with one ridge after several passes;

to spread grain from piles to dry on the threshing floor with its consequent piling back after drying.

6. During grain piling or store loading the grain processing complex can move the grain to one or other side from the longitudinal axis or pile grain behind itself.

7. The turning thrower enables to form high and narrow pile from low and wide and vice versa as well to make one pile from several grain heaps.


8. A reliable automated control system of the grain processing complex enables to fulfil the following technological tasks:

launch and shut-down of electric engines;

protection of electric engines against overload;

protection of wiring against short circuit currents;

protection of electric engines against self-starting (zero protection).


9. Minimal labor costs The low structural weight and increased rigidity of the machine make the maintenance easier and result in its better maneuverability



10. Smooth adjustment of the ground speed is ensured thanks to a motor reduction unit with rotation speed control.

11. High reliability and safety A screw braking gear ensured 100% fixation of the thrower.
