gr precision centreless ground shafting - ondrives · a product information updated august 2017 and...
TRANSCRIPT
L I N E A R M O T I O N
Product information updated August 2017 and subject to change. Please click the product links for prices and availability.
Precision Centreless Ground Shafting303 Stainless Steel : 1 - 30mm h6 Dia. Shaft
GR
Material303 Stainless Steel.Straightness: 0.20 per 300mm.Diameter Tolerance: h6.Surface Finish: 0.4 Ra (16cla).Hardness: Soft HRB 83.
Other Info.Specials can be machined to drawings: Higher surface finishes, tighter straightness and diameter tolerances, grooves, journals, flats, drill holes, tapped holes, threads, etc. Please fax details of quantity required and dimensions ie. ØD, length, tolerance, material and machining.Ø2mm to Ø50 mm inclusive (all tolerances and sizes) larger diameters on request.A large range of carbon ground steels (eg. EN8 and En1A) Ø3mm through to Ø110 mm available plus alloys, exotic stainless steels, aluminium and nylon.
GR1.000-1GR1.500-0.5GR1.500-1GR2.000-0.5GR2.000-1GR2.500-1GR2.992-6GR3.000-6GR3.992-6GR3.999-6GR4.991-9GR5.000-6GR5.993-6GR5.992-9GR6.000-6GR6.000-9GR7.000-6GR7.000-9GR7.993-6GR7.993-9
1.0001.5001.5002.0002.0002.5002.9923.0003.9923.9994.9915.0005.9935.9926.0006.0007.0007.0007.9937.993
100 50100 50100100600600600600900600600900600900600900600900
PartNumber
303 Stainless ØD h6 L±0.25
GR8.000-6GR8.992-9GR9.992-9GR9.993-10GR10.000-4GR10.000-9GR10.000-10GR11.991-4GR11.993-10GR12.000-4GR12.000-9GR12.000-10GR12.993-4GR13.993-9GR14.991-9GR16.000-9GR19.992-9GR25.000-9GR29.992-9
8.0008.9929.9929.993
10.00010.00010.00011.99111.99312.00012.00012.00012.99313.99314.99116.00019.99225.00029.992
600900900
1,000400900
1,000400
1,000400900
1,000400900900900900900900
PartNumber
303 Stainless ØD h6 L±0.25
L±0.25
ØD h6
L I N E A R M O T I O N
Product information updated August 2017 and subject to change. Please click the product links for prices and availability.
Precision Centreless Ground Shafting 316 & Hard 17-4PH Stainless Steel : 1 - 30mm h6 Dia. Shaft
GR
Material316 Stainless Steel 17-4PH Hard Stainless Steel.Straightness: 0.20 per 300mm.Diameter Tolerance: h6.Surface Finish: 0.4 Ra (16cla).17-4PH Hardness: HRC40.
Other Info.Specials can be machined to drawings: Higher surface finishes, tighter straightness and diameter tolerances, grooves, journals, flats, drill holes, tapped holes, threads, etc. Please fax details of quantity required and dimensions ie. ØD, length, tolerance, material and machining.Ø2mm to Ø50 mm inclusive (all tolerances and sizes) larger diameters on request.A large range of carbon ground steels (eg. EN8 and En1A) Ø3mm through to Ø110 mm available plus alloys, exotic stainless steels, aluminium and nylon.
GR1.000-0.5DGR1.000-1DGR1.500-0.5DGR1.500-1DGR2.000-0.5DGR2.000-1DGR2.500-0.5DGR2.500-1DGR3.000-1DGR3.000-2DGR4.000-1DGR4.000-2DGR5.000-1DGR5.000-2DGR6.000-1DGR6.000-2DGR7.000-2DGR7.000-4DGR8.000-2DGR8.000-4DGR9.000-2DGR9.000-4DGR10.000-2DGR10.000-4D
1.0001.0001.5001.5002.0002.0002.5002.5003.0003.0004.0004.0005.0005.0006.0006.0007.0007.0008.0008.0009.0009.000
10.00010.000
50100 50100 50100 50100100200100200100200100200200400200400200400200400
PartNumber
316 Stainless ØD h6 L±0.25
GR1.000-0.5PGR1.000-1PGR1.500-0.5PGR1.500-1PGR2.000-0.5PGR2.000-1PGR2.500-0.5PGR2.500-1PGR3.000-1PGR3.000-2PGR4.000-1PGR4.000-2PGR5.000-1PGR5.000-2PGR6.000-1PGR6.000-2PGR7.000-2PGR7.000-4PGR8.000-2PGR8.000-4PGR9.000-2PGR9.000-4PGR10.000-2PGR10.000-4P
1.0001.0001.5001.5002.0002.0002.5002.5003.0003.0004.0004.0005.0005.0006.0006.0007.0007.0008.0008.0009.0009.000
10.00010.000
50100 50100 50100 50100100200100200100200100200200400200400200400200400
PartNumber
17-4PH Stainless ØD h6 L±0.25
L±0.25
ØD h6
L I N E A R M O T I O N
Product information updated August 2017 and subject to change. Please click the product links for prices and availability.
Centreless Ground ShaftingSteel - Unhardened : 2 - 30mm h6 Dia. Shaft
RSH
MaterialSilver Steel BS1407 15 Hrc. Tolerances: ≤25mm: +0/-0.015mm, >25mm: +0/-0.025mm. Hardness: ≤285HB when measured in accordance with BS240.Surface Finish: 0.6µm or better.Tensile Strength: 680N/mm2.
OrderingAll shafts supplied 3mm oversize (minimum).Minimum order quantities may apply to 333mm lengths.Shafts in 2m lengths available, P.O.A.Non-standard diameters to 50mm available in custom lengths up to 2m to customer specific requirements.
Other Info.Hardening: The high carbon content of BS1407 silver steel means that it can be hardened to give considerable wear resistance. Heat slowly to 760 - 800°C using the upper end of the temperature range for lower carbon contents and lower end of temperature range for higher carbon contents. Austenitize until the temperature is uniform. Quench into well agitated water.The approximate quench hardness is 65 to 69 Rc. Tempering: Temper immediately after hardening preferably before the tool reaches room temperature. Temper for a minimum of 1 hour at temperatures between 180°C - 350°C, dependent upon the final hardness required (see graph opposite).
FeaturesA versatile high carbon tool steel ground to very close tolerances with highly polished appearance created by the extremely fine surface finish.The chromium content increases strength and hardenability. Readily machinable as supplied in the spheroidised annealed condition.
L
ØD h6
RSH020ARSH025ARSH030ARSH035ARSH040ARSH045ARSH050ARSH055ARSH060ARSH065ARSH070ARSH075ARSH080ARSH085ARSH090ARSH095ARSH100ARSH105ARSH110ARSH115A
RSH020BRSH025BRSH030BRSH035BRSH040BRSH045BRSH050BRSH055BRSH060BRSH065BRSH070BRSH075BRSH080BRSH085BRSH090BRSH095BRSH100BRSH105BRSH110BRSH115B
RSH020CRSH025CRSH030CRSH035CRSH040CRSH045CRSH050CRSH055CRSH060CRSH065CRSH070CRSH075CRSH080CRSH085CRSH090CRSH095CRSH100CRSH105CRSH110CRSH115C
2.02.53.03.54.04.55.05.56.06.57.07.58.08.59.09.5
10.010.511.011.5
L = 333mm
PartNumberL = 1m L = 3m ØD h6
RSH120ARSH125ARSH130ARSH140ARSH150ARSH160ARSH170ARSH180ARSH190ARSH200ARSH210ARSH220ARSH230ARSH240ARSH250ARSH260ARSH270ARSH280ARSH290ARSH300A
RSH120BRSH125BRSH130BRSH140BRSH150BRSH160BRSH170BRSH180BRSH190BRSH200BRSH210BRSH220BRSH230BRSH240BRSH250BRSH260BRSH270BRSH280BRSH290BRSH300B
RSH120CRSH125CRSH130CRSH140CRSH150CRSH160CRSH170CRSH180CRSH190CRSH200CRSH210CRSH220CRSH230CRSH240CRSH250CRSH260CRSH270CRSH280CRSH290CRSH300C
12.012.513.014.015.016.017.018.019.020.021.022.023.024.025.026.027.028.029.030.0
L = 333mm
PartNumberL = 1m L = 3m ØD h6
Chemical CompositionRange
C 0.950 / 1.250% Si 0.400% max. Mn 0.250 / 0.450% P 0.045% max S 0.045% max Cr 0.350 / 0.450%
Typical C 1.130% Si 0.220% Mn 0.370% P 0.014% S 0.018% Cr 0.430%
70
65
60
55
50100 150
Rock
wel
l C S
cale
Tempering Temp. °C200 250 300
L I N E A R M O T I O N
Product information updated August 2017 and subject to change. Please click the product links for prices and availability.
ØD h6
L
M*H
S
K
P/2±0.2 P/2±0.2P P
* Positional tolerance of thread is ±0.2
Drilled Hard Steel Linear Shafting12 - 80mm Dia. Shafting For Use With Open Linear Bearings
ZWB
MaterialCf53 Hardened Steel (1.1213), 59 HRC minimum.Tolerance: h6.Straightness: 0.10µm.Surface Hardening Depth (ISO 131012): Ø12-16 = 0.6 min., Ø20-30 = 0.9 min., Ø40-50 = 1.5 min., Ø60-80 = 2.2 min.
Specials, P.O.A.Chrome plated Steel and Stainless Steel X90/X46.h7 tolerance available on request, P.O.A).Lengths up to 3,000mm. (up to 6,000mm lengths subject to carriage restrictions).
Other Info.For applications in shaft support rail units for use with open type linear bearings.
1212121616162020202525252530304040405050506080
75120150
75100150
75100150
75120150200150200150200300150200300300300
37.560.075.037.550.075.037.550.075.037.560.075.0
100.075.0
100.075.0
100.0150.0
75.0100.0150.0150.0150.0
M4M4M4M5M5M5M6M6M6M8M8M8M8M10M10M10M10M10M12M12M12M14M16
777999
1111111515151517171919192121212528
2.02.02.02.52.52.53.03.03.03.03.03.03.03.53.54.04.04.04.04.04.04.04.0
5556667779999
11111111111313131517
854864
1612
81610
868686486444
600600600600600600
1,2001,2001,2001,2001,2001,2001,2001,2001,2001,2001,2001,2001,2001,2001,2001,2001,200
ZWB12A600AZWB12B600AZWB12C600AZWB16A600AZWB16B600AZWB16C600AZWB20B1200AZWB20E1200AZWB20D1200AZWB25B1200AZWB25C1200AZWB25E1200AZWB25D1200AZWB30E1200AZWB30C1200AZWB40C1200AZWB40B1200AZWB40D1200AZWB50D1200AZWB50B1200AZWB50C1200AZWB60A1200AZWB80A1200A
PartNumber
ShaftDia.
ØD h6Pitch
P P/2±0.2
Nominal Screw
M*
TapDepth
K
Recess Depth
H
RecessDia.
S
No. of Holes on
L
StandardLength
L
L I N E A R M O T I O N
Product information updated August 2017 and subject to change. Please click the product links for prices and availability.
Length
ØD h6
ØD
LSP - “Supersmart” Linear Bearing
LBE-C “Open” Linear Bearing
Linear Shafting, Steel Hardened & Groundh6 tolerance : For use with Linear Bearings
Z-A
MaterialCk53 / Cf53 Steel.Surface Finish: <0.30µm Ra.Straightness: 0.10mm/m.Hardness: 62 HRC.
Specials, P.O.A.Special machining available on shafting, special tolerances on length.Hollow and Inch diameters available.A large range of carbon ground steels (eg. EN8 and En1A) Ø4mm through to Ø100 mm available,plus alloys, exotic stainless steels, aluminum and nylon.
Other Info.Linear shafting designed to be used with our linear bearings.
4568
1012141516182022253040506080
0/ -80/ -80/ -80/ -90/ -90/-110/-110/-110/-110/-110/-130/-130/-130/-130/-160/-160/-190/-19
3001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,000
4,5004,5004,5004,5004,5006,0006,0006,0006,0007,6007,6007,6007,6007,6007,6007,6007,6007,600
0.0990.1540.2220.3950.6170.8881.2081.3871.5781.9982.4662.9843.8535.5499.865
15.41322.19539.458
0.40.40.40.40.40.60.60.60.60.90.90.90.91.51.51.51.52.2
Z-4-300AZ-5-1000AZ-6-1000AZ-8-1000AZ-10-1000AZ-12-1000AZ-14-1000AZ-15-1000AZ-16-1000AZ-18-1000AZ-20-1000AZ-22-1000AZ-25-1000AZ-30-1000AZ-40-1000AZ-50-1000AZ-60-1000AZ-80-1000A
PartNumber
Nom. Dia.ØD h6
h6 Toleranceµm
StandardLength
MaximumLength
MassKg/m
Depth ofHardening
L I N E A R M O T I O N
Product information updated August 2017 and subject to change. Please click the product links for prices and availability.
Length
ØD h6
ØD
NOTE: When the shafting is to be used under extremely corrosive conditions, it is recommended that 304 or 316 Stainless shafting is used. Please contact our Technical Dept. for further details.
LSP - “Supersmart” Linear Bearing
LBE-C “Open” Linear Bearing
Linear Shafting, Stainless Hardened & Groundh6 tolerance : For use with Linear Bearings
Z-B
MaterialStainless Steel 440C (1.4112) X90CrMoV18. Surface Finish: <0.30µm Ra.Straightness: 0.10mm/m.Hardness: 57 HRC.
Specials, P.O.A.Special machining available on shafting, special tolerances on length.Special ceramic shafting available in small diameters and lengths:ZrO2 (1200 Hv) and Al2O2 (2000 Hv) featuring high hardness, high temperature use and chemical resistance.Ø3mm through to Ø60 mm inclusive (all tolerances and sizes) larger diameters on request.A large range of carbon ground steels (eg. EN8 and En1A) Ø4mm through to Ø100 mm available,plus alloys, exotic stainless steels, aluminum and nylon.
Other Info.Linear shafting designed to be used with our linear bearings.
34568
10121516202530
0/ -60/ -80/ -80/ -80/ -90/ -90/-110/-110/-110/-130/-130/-13
300300
1,0001,0001,0001,0001,0001,0001,0001,0001,0001,000
4,5004,5004,5004,5004,5004,5006,0006,0007,6007,6007,6007,600
0.0540.0960.1500.2160.3850.6010.8651.3521.5382.4033.7555.407
0.40.40.40.40.40.40.60.60.60.90.91.5
Z-3-300BZ-4-300BZ-5-1000BZ-6-1000BZ-8-1000BZ-10-1000BZ-12-1000BZ-15-1000BZ-16-1000BZ-20-1000BZ-25-1000BZ-30-1000B
PartNumber
Nom. Dia.ØD h6
h6 Toleranceµm
StandardLength
MaximumLength
MassKg/m
Depth ofHardening
L I N E A R M O T I O N
Product information updated August 2017 and subject to change. Please click the product links for prices and availability.
LØD h8
drylin® Aluminium ShaftsSolid Shafts : For use with igubal® drylin® Bearings
AWM
MaterialAluminium EN AW 6061/6060.Tolerance: h8-h9.Roundness & Straightness: EN 754-3Hardness: 75HBSurface: Hard anodised @ 40±5 microns. Surface Hardness: 450-550 HV.Roughness: <0.6.Spec. Electr. Resistance: 4*1011Ohm mm2/m.Chemical Resistance: 2<ph<9.
Specials, P.O.A.Shafts up to 3000mm available
Other Info.For use with drylin® Bearings: RJUM05, RJUM06, OJUM06, RJZM01, RJUM01, RJZM03, RJUM03, OJUM01, OJUM03, JUM01, JUM02.
6 6 6 6 8 8 8 8101010101212121216161616202020 2025252525
300600
1,0002,000
300600
1,0002,000
300600
1,0002,000
300600
1,0002,000
300600
1,0002,000
300600
1,0002,000
300600
1,0002,000
0.0240.0480.0800.1600.0430.0860.1440.2880.0650.1310.2180.4360.0970.1940.3230.6460.1720.3440.5731.1460.2690.5380.8961.7920.4230.8471.4112.822
AWM06-300AWM06-600AWM06-1000AWM06-2000AWM08-300AWM08-600AWM08-1000AWM08-2000AWM10-300AWM10-600AWM10-1000AWM10-2000AWM12-300AWM12-600AWM12-1000AWM12-2000AWM16-300AWM16-600AWM16-1000AWM16-2000AWM20-300AWM20-600AWM20-1000AWM20-2000AWM25-300AWM25-600AWM25-1000AWM25-2000
PartNumber
OuterDiameter
ØD h8Length
LMass
kg
L I N E A R M O T I O N
Product information updated August 2017 and subject to change. Please click the product links for prices and availability.
drylin® Aluminium ShaftsHollow Shafts : For use with igubal® drylin® Bearings
AWMRAWM
MaterialAluminium EN AW 6061/6060.Tolerance: h8-h9.Roundness & Straightness: EN 754-3Hardness: 75HBSurface: Hard anodised @ 40±5 microns. Surface Hardness: 450-550 HV.Roughness: <0.6.Spec. Electr. Resistance: 4*1011Ohm mm2/m.Chemical Resistance: 2<ph<9.
Specials, P.O.A.Shafts up to 3000mm available
Other Info.For use with drylin® Bearings: RJUM05, RJUM06, OJUM06, RJZM01, RJUM01, RJZM03, RJUM03, OJUM01, OJUM03, JUM01, JUM02.
20 h920 h920 h920 h925 h925 h925 h925 h930 h830 h830 h830 h840 h840 h840 h840 h850 h850 h850 h850 h8
1616161619191919151515152020202028282828
2.02.02.02.03.03.03.03.07.57.57.57.5
10.010.010.010.011.011.011.011.0
300600
1,0002,000
300600
1,0002,000
300600
1,0002,000
300600
1,0002,000
300600
1,0002,000
0.0960.1920.3200.6400.1770.3540.5901.1800.4440.8881.4802.9600.7891.5782.6305.2601.1252.2503.7507.500
AWMR20-300AWMR20-600AWMR20-1000AWMR20-2000AWMR25-300AWMR25-600AWMR25-1000AWMR25-2000AWM30-300AWM30-600AWM30-1000AWM30-2000AWM40-300AWM40-600AWM40-1000AWM40-2000AWM50-300AWM50-600AWM50-1000AWM50-2000
PartNumber
OuterDiameter
ØD
InnerDiameter
d
InsulationThickness
tLength
LMass
kg
L
ØD
dt
L I N E A R M O T I O N
Product information updated August 2017 and subject to change. Please click the product links for prices and availability.
C5Length: Max = 3960
T1 C5
EB
HØd1
V
D
a°
drylin® Aluminium ShaftsPre-drilled Supported Shafts : For use with igubal® drylin® Bearings
AWMU
MaterialAluminium EN AW 6061/6060.Tolerance: h8-h9.Roundness & Straightness: DIN 12020.Hardness: 75HBSurface: Hard anodised @ 40±5 microns. Surface Hardness: 450-550 HV.Roughness: <0.6.Spec. Electr. Resistance: 4*1011Ohm mm2/m.Chemical Resistance: 2<ph<9.
Specials, P.O.A.Shafts up to 3000mm available
Other Info.For use with drylin® Bearings: OJUM06, OJUM01, OJUM03, JUM01, JUM02.
12-0.10
12-0.10
12-0.10
12-0.10
16-0.10
16-0.10
16-0.10
16-0.10
20-0.10
20-0.10
20-0.10
20-0.10
25-0.10
25-0.10
25-0.10
25-0.10
30-0.10
30-0.10
30-0.10
30-0.10
40-0.15
40-0.15
40-0.15
40-0.15
404040404545454552525252575757576969696973737373
222222222626262632323232363636364242424250505050
555555556666666677778888
4.54.54.54.55.55.55.55.56.66.66.66.66.66.66.66.69.09.09.09.09.09.09.09.0
50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°
292929293333333337373737424242425151515155555555
75 75 75 75100100100100100100100100120120120120150150150150200200200200
202020202020202020202020202020202020202020202020
5757575769696969696969697979797994949494
119119119119
300600
1,0002,000
300600
1,0002,000
300600
1,0002,000
300600
1,0002,000
300600
1,0002,000
300600
1,0002,000
0.2250.4500.7501.5000.3000.6001.0002.0000.4250.8501.4152.8300.5421.0841.8053.6100.8071.6142.6905.3801.2182.4364.0608.120
AWMU12-300AWMU12-600AWMU12-1000AWMU12-2000AWMU16-300AWMU16-600AWMU16-1000AWMU16-2000AWMU20-300AWMU20-600AWMU20-1000AWMU20-2000AWMU25-300AWMU25-600AWMU25-1000AWMU25-2000AWMU30-300AWMU30-600AWMU30-1000AWMU30-2000AWMU40-300AWMU40-600AWMU40-1000AWMU40-2000
PartNumber D B H±0.25 V d1 a° E±0.25
Hole Spacing
T1Min.
C5Max.
C5Shaft
LengthMass
kg