goju no to i e ltr

8/13/2019 Goju No to i e Ltr

1/10

Five-storied pagoda of HoryujiTemple, Japan : Assembly Instructions

Indicates where sections should be gluedtogether.

Indicates where to insert sections.

Do not glue the sections together.

Indicates sections that should be glued first,then cut out.

Before starting assembly :Writing the number of each section on its back side beforecutting out the sections is highly recommended.(* This way, you can be sure which section is which evenafter cutting out the sections.)

Assembly Instructions

Mountain fold(dotted line)Make a mountain fold.

Valley fold(dashed and dotted line)

Make a valley fold.Scissors line(solid line)Cut along the line.

Cut in line(solid line)Cut along the line.

Glue spot(Red dot)

Glue parts with the same number together.

Glue spot(Green dot)Glue within the same part.

Glue spot(Blue dot)Glue to the rear of the other part.

Glue

The glue spot(colored dot)shows where to apply the glue.

Tools and materials

Assembly tip

Caution

Scissors, set square, glue(We recommend stick glue), pencil, usedballpoint pen, toothpicks, tweezers, (useful for handling small parts)

Before gluing, crease the paper along mountain fold and valleyfold lines and make sure rounded sections are nice and stiff.

Glue, scissors and other tools may be dangerous to young childrenso be sure to keep them out of the reach of young children.

View of completed model

Assembly Instructions : Ten US letter sheets (No. 1 to No. 10)

*Hint: Trace along the folds with a ruler and an exhausted pen (no ink) to get a sharper, easier fold.

* Build the model by carefully reading the Assembly Instructions , in the parts sheet page order.

* This model was designed for Papercraft and may differ from the original in some respects.

[1]Assemble the foundation and base pillars.

The staircases are minute anddifficult to fold. Use a ruler todefine the folding lines as shownin the illustration.

Five-storiedpagodaofHoryujiTempleNara, Japan

http://www.canon.com/c-park/


2/10


Five-storiedpagodaofHoryujiTempleNara,Japan

Front (east)

Left

(south)

Rig

ht(north

)

Rear (west)

Left

(south

)

Rear (west)


3/10



Glue the Partfacing backward.

The east sideis the front.

After gluing theparts, cut theextra paper off.

Assemble 6 partsin the same way.

Assemble

the 4 sides inthe same way.

Left

(south

)

Rear(west)

West

South


4/10



[2]Assemble the building.

Insert the pillar partto see if insertion andremoval are smooth.


5/10



Left (south)

Front (east)

Rear (west)

Right (north)

Cross-section

Front (east)

Front (east)

Right(no

rth)


6/10


Aline the upper partsand glue them

together.

Bend in the direction of the arrow as you glue.Glue 4 sides inthe same way.

Glue to the rear sidein the same way asthe front part.

Glue to the rear sidein the same way as

the front part.


7/10


Parts andmust face the front.

Assemble Parts andin the same way. Bend in the direction of the arrow as you glue.



the front part.


8/10


Bend in the direction of the arrow as you glue.



the front part.


9/10


Pay attention to the compass directions.Bend in the direction of the arrow as you glue.

South

West

East

East

East

East

North

North

North



the front part.


10/10


[3]Insert the main building to the foundation.

Finished!


East

North

Front (east)

Right

(north

)

goju no to i e ltr

Documents