go-iot · raspberry pi compute 1 or 3 compatible 2 ethernet ports, hdmi, sd holder, 4 usb ports,...
TRANSCRIPT
Modular hardware and software solutions for the next generation of Building Automation
ONE open solution from sensor to the cloud. Our hardware and software solutions enable the possibility to create your own apps in whatever language you want and have it communicate with all devices and sensors in one modular solution.
Go-IoT
CB-PI Compute PCB Raspberry PI Compute 1 or 3 compatible2 Ethernet Ports, HDMI, SD Holder, 4 USB Ports, RS232, RS4853 TTL Serial Ports, RTC with Battery Backup, EEPROM, 1 wireI2C, SPI, 21 x GPIO Expansion IO, 12V DC Input
CB-PI Zero PCB Can be used with Raspberry PI Zero or PI ZeroWEthernet 10MB, 4 USB Ports, RS232, RS485, 2 TTL Serial PortsRTC with Battery Backup, EEPROM, 1 wire, I2C, SPI21 x GPIO Expansion IO, 12V DC Input
CB-IMX6UL PCB NXP iMX6UL (ULL also available)528MHz (800MHz with ULL), RAM 256MB, NAND 128MB/4GB2 Ethernet 10/100, SD Holder, 4 USB Ports, RS232, RS485, 2 TTL Serial PortsRTC with Battery Backup, EEPROM, 1wire, 2 I2C , SPI 24 x GPIO Expansion IO, 12V DC Input
BaseBoard 3 Position or 2 Position Upto to 3 Plug in positions - 2 x USB - 2 x Serial 1 x I2C, 1 x SPI, 8 x Opto Isolated Inputs Upto 5 Relays Battery Backup/Charger - 3.3Ah 3 FET Outputs +12V input or up to +48V input
UB-LED_LCD PCB 17 Dual Read/Green LEDs controlled by I2C TLC59116 LED Controller 128 x 64 OLED 1.3” Graphic LCD UB-LCD_SW-011.8” Colour LCD 160 x 128 with 4 Keys available also
www.go-iot.io
PB-PI_COM-01
CB-IMX6UL-01
BB-3ST-01
BB-2ST-01
UB_LED_LCD-01
UB-LCD_SW-01
CB-PI_ZERO-01
Go-IoT Hardware
[email protected] www.go-iot.io
PG-PINGOTransmits data over Power Lines using CENELEC B 95Khz to 125KHz Baud Rate 50 - 3200 BPS LED for Comms Status +12V DC Input
PG-RS485 USB or Serial Input 4 wire Full Duplex, 2 wire Half Duplex LEDs for TX and RX Isolation Voltage 2.5KV DC Input +5V
PG-MBUS80 USB or Serial Input Interfaces upto 80 MBus Meters MBUS Voltage 36V LEDs for TXD and RXD +5.0V Input Isolation Voltage 2.5KV
PG-GSM-3G USB or Serial InputQuectel UG96 GSM Module5 Band, Data Rate upto 5.76MbpsLED Indicators, DC Input +5V
PG-ENOCEAN USB or Serial InputEnOcean Transceiver TCM310Frequency 868 / 902,928MHzData Rate 125Kbps, DC Input +5V
PG-SIGFOX USB or Serial InputLora SigfoxTransceiver MM002Frequency Band 434 / 868MHzData Rate upto 300Kbps or10937bps LORA, DC Input +5V
PG-AI4 PCB 4 Channel Opto Isolated Analog Input Module0-2V, 0-5V, 4-20mA Single Ended Inputs
Differential Inputs
Bespoke DesignOther requirement? Let us know and we will create it for you!
PG-PSU 90V AC to 240V AC Input +12V @ 1A output Isolation Voltage 2.5KV RMS
PG-MBUS05 USB or Serial Input Interfaces upto 5 MBus Meters MBUS Voltage 36V LEDs for TXD & RXD +5.0V Input Isolation Voltage 2.5KV
PG-NB-IOT USB or Serial Input Quectel BG96 GSM Module 4 Band, Data Rate upto 375KbspLED Indicators, DC Input +5V
PG-LORA USB or Serial InputLora Transceiver RN2483AFrequency Band 434 / 868MHzData Rate upto 300Kbps or10937bps LORA, DC Input +5V
PG-wMBUS USB or Serial InputwMBUS Transeciver AMB8x46Frequency 868MHzData Rate upto 100KbspRange upto 14000mLED Indicators, DC Input +5V
COMING SOON DALI Lighting Controller PCB
DSX Lighting Controller PCB
PG-XBEE USB or Serial InputXBEE Transceiver EM357Frequency Band 2.4GHzRange upto 90mData Rate upto 250KbpsLED Indicators, DC Input +5V
Go-IoT Hardware Go-IoT Plugins
Decrease costs and automate configuration work using our Secure & Scalable, Sensor to Cloud Solutions with powerful hardware and plugins. Apps for powerful trend logging decreasing the configuration of trend logs from 3 days to 30 minutes for 3000 sensors. Connect wireless standards and protocols with legacy products and still have everything in the same solution, making it possible to draw conclusions regarding all of your data like never before.
Secure transfer from sensor to the cloud with encryption and OAuth 2.0 authentication, equivalent to VPN. Scalable from few sensors/actuators in-building to thousands by the Edge Server, using small footprint hardware to any database of choice BACnet/WS and/or BACnet/IT enables moving software components from the Cloud to Edge and vice versa.
We can enable access to ALL data inside the building remotely, securely at the edge and in the cloud
InstallHardware
AutoConfigureSoftware
CloudEnabled
Go-IoT Sensor to Cloud