getting to center for advanced 2d...

6
© Copyright National University of Singapore. All Rights Reserved. Getting to Center for Advanced 2D Materials via Buona Vista Exit on the Ayer Raja Expressway

Upload: voduong

Post on 06-Apr-2018

214 views

Category:

Documents


0 download

TRANSCRIPT

© Copyright National University of Singapore. All Rights Reserved.

Getting to

Center for Advanced 2D Materials

via Buona Vista Exit

on the Ayer Raja Expressway

© Copyright National University of Singapore. All Rights Reserved.

KENT RIDGE CAMPUS

MAP

© Copyright National University of Singapore. All Rights Reserved.

• Enter from South Bona Vista Road towards National University Hospital

• Pass the Kent Ridge MRT Station

• Continue towards a round about ahead

© Copyright National University of Singapore. All Rights Reserved.

• Continue pass round about

• Pass School of Dentistry

• Continue towards Faculty of Science

© Copyright National University of Singapore. All Rights Reserved.

• Beyond the round-about, the road turns into red bricks.

• After Cross-walk/Zebra Crossing, turn left immediately after bus-stop

into Carpark = Science Drive 1 (See photo below).

• Alight at the foyer of the building

© Copyright National University of Singapore. All Rights Reserved.

• Take the elevator/lift at foyer of S16 to level 6

• At Level 6, veer left to glass door on your left.

• Enter to access the Theory Common Room.

• Welcome to Center for Advanced 2D Materials (CA2DM).