geodrill australia capability statement august 2019

GEODRILLAUSTRALIACAPABILITYSTATEMENT

[email protected]

GEODRILLAUSTRALIA

CAPABILITYSTATEMENT

GEODRILLAUSTRALIA

Geotechnical, Environmental & Water Bore Drilling Specialists

GeoDrill Australia Pty Ltd Capability Statement 2017


[email protected]



[email protected]

GEODRILLAUSTRALIAEstablished in 2006, GeoDrill Australia is a leading drilling company with a proven reputation in the mining and construction sectors. We have a diverse capability in the exploration, geotechnical, environmental and water bore industry. Drilling knowledge has been passed down through four generations.

GeoDrill Australia is accredited with ISO certification for the following categories:

• ISO 9001:2015 Quality Management System; • ISO 14001:2015 Environmental Management System; • OHSAS 18001:2007 Occupational Health and Safety Assessment System; • AS/NZS 4801:2001 Safety Management System

DRILLINGSERVICESANDMETHODSOur diverse capability and specialist skills, along with our proven project experience, allow us to successfully deliver services that meet the needs of our clients.

CORESERVICES

• Mineral & Coal Exploration • Geotechnical & Environmental Drilling • Domestic & Irrigation Water Bores

DRILLINGMETHODS

• Rotary Mud • Rotary Air • DTH Casing advancing system for drilling through any type of rock fill • Solid flight augering • Hollow flight augering • CBR Sampling • Standard Penetration Testing • U50, U63, U75 & U100 Tubes • Conventional Diamond Coring (NMLC, HMLC, 4C), Wire line Diamond Coring (NQ, HQ, PQ) • Environmental Drilling • Push Tube Sampling – MC5 • Vibrocore • Over water drilling on floating and jack up barges

DRILLINGSUPPORTSERVICESANDEQUIPMENT

• Packer testing equipment - NQ & HQ, triple and double systems • Concrete Coring • Vibrocore Testing – purpose built rubber tracked machine • Instrumentation installation - piezometer, inclinometer, extensometers • Borehole grouting & decommissioning • Installation of groundwater and monitoring bores



[email protected]

PROJECTEXPERIENCEKEYPROJECTS-2019Middlemount Coal – HQ3 and Chip holes to 350m

BHP Mount Arthur Coal – Tailings Storage Facility, 20m PCD rotary air holes

MACH Energy, Mount Pleasant – 20+ boreholes up to 50m depth utilising HQ wireline, NMLC conventional coring and rotary mud PCD boreholes

Evolution Mining Cracow – 8 HQ wireline boreholes and air development of existing monitoring bores

BMA Blackwater – 22 boreholes for structure foundations

BMA Saraji – Tailing Storage Facility vibrating wireline piezometers

Santos – Monitoring bores to 20m

Toowoomba Second Range Crossing – Inclinometers to 120m

ARTC Inland Rail – Multiple rigs drilling boreholes, inside and outside the existing rail corridor, NMLC & HQ wireline

CPB – Permanent survey marker boreholes up to 35m in depth for stainless steel survey rod installation

Burleigh Interchange – Multiple rigs operating night and day shift to complete a 40 borehole package Veloway Bikeway – 4C conventional boreholes through existing piles

Columboola PV Solar Farm – 10 boreholes for foundation design of a new solar farm

SEQ Water – Shallow boreholes for new haul road design

Coombabah Waste Water Treatment Plant – 20 boreholes including monitoring bores to 35m

Cement Australia, Yarwun – 40m deep boreholes for Cement Australia upgrades

Willawong Transfer Station – 15 boreholes for a transfer station

Petrie Shopping Centre – 10 boreholes ranging in depth from 12 – 15m for geotechnical testing

Redbank Plains – Three rigs and two compressors undertaking coring and DTH to 30m in old coal workings

Reservoir Water Main Gladstone – Shallow boreholes up to 10m

Kawana Sewerage Treatment Plant – 35m deep NMLC core holes as part of an upgrade package

J580 Dalton Dr Project Maroochydore – Geotechnical and environmental testing holes to 21m

Pimpama/Coombabah Sewerage Treatment Plant - Monitoring bores to 20m



[email protected]

KEYPROJECTS-2018Toowoomba Second Range Crossing – DHH rotary air and HQ core holes ranging in depth from 30m to 120m, for the installation of inclinometers and vibrating wireline piezometers. The boreholes were completed utilising various methods and techniques, including HWT casing advancer system and ROBIT 220mm DHH casing advancing system

Anglo American Dawson - Kianga Creek Diversion, 15+ vertical and angle HQ boreholes with core orientation

Torres Straight Islands – Mabuiag and Coconut Island, hand auger holes and rotary air boreholes up to 18m deep for environmental monitoring installations. The project involved the coordination of the drilling rig and air compressor to be sea freighted to Mabuiag Island via Horn Island with the involvement of Biosecurity Australia

BMA Saraji – Drilling and installation of vibrating wireline piezometers up to 25m in depth for a tailings dam

BMA Blackwater - TCP stacker replacement, several shallow 10m holes with CBR sampling

CRR – 30+ difficult access boreholes within inner city Brisbane and in the QR corridor. Acoustic televiewer, packer testing and angle holes to 50m+ depth with multiple rigs

Skyway – Inclinometers and vibrating wireline piezometers for the Brisbane Airport upgrade

Isle of Capri, Gold Coast – Overwater barge & on land drilling holes up to 45m depth, with multiple rigs, for a 13 week drilling program

SCC Landfill Gas Bores – 30+ landfill gas monitoring bores drilled at Landsborough, Woombye, Buderim & Caloundra. Depths ranging from 5m – 40m

Manly Boat Harbour Dredging Program – Overwater drilling on a floating barge for the Manly Harbour dredging project

Anglo American Dawson – 25m boreholes for Anglo coal conveyor investigation at Dawson Mine

N2NS Inland Rail – 3 rigs drilling boreholes to 35m over a 6 week program

Emu Swamp Dam – HQ granite boreholes up to 70m in depth with packer testing. Drilling carried out with multiple crews for 24 days straight

Anglo American – Dawson Mine road works upgrade project. 15+ boreholes to 20m in depth

MLHU – Mount Lindsay Highway Upgrade stage 1 and 2 – 11 nightshift boreholes to 20m depth carried out over a 3 week period

Over Water Barge Drilling – Overwater floating barge drilling at various sites for boat ramp upgrades

Veloway Bikeway – Stage E – 27 boreholes with NMLC diamond coring undertaken during day and night works



[email protected]

QR Keperra Rail Corridor – Shallow boreholes with extremely tight and difficult access, undertaken with the GD05 Comacchio with its GD20 support track machine

Warhook Solar Farm – 23 boreholes 4m in depth, with 1.5m SPT testing, drilled in 2.5 day program

New Chum Landfill – 50m deep landfill gas monitoring bores drilled with a combination of rotary air DHH and HWT casing advancer system

Santos – 20m geotechnical holes for communication towers

NBN – Tower drilling throughout Queensland

AURA – Boreholes up to 30m depth for various bridge sites

Skyway CPB – Permanent survey marker boreholes up to 35m in depth for stainless steel survey rod installation

Beaudesert Pipeline – 20+ shallow bores for the Beaudesert Pipeline project

Cone Penetrometer Tests – CPTs to 20m in Molongle Creek, North of Bowen

Bundaberg Multi Unit Development – 30m deep boreholes on the Burnett River banks

Optus – Tower drilling throughout Queensland

Bundaberg Levee Bank – 20m+ depth boreholes with monitoring equipment installation

Water Bores – 40+ water bores ranging in depth from 30m to 190m



[email protected]

KEYPROJECTS-2017Bruce Highway to Sunshine Coast Motorway – Over 100 vertical and angle bore holes HMLC & NMLC up to 40m depths with wireline piezometers

Toowoomba Second Range Crossing – Rotary air and rotary mud holes ranging in depth from 30 to 90m for the installation of inclinometers and vibrating wireline piezometers

BHUSD-D2 Cooroy to Curra – Over 40 bore holes to 40m

Brisbane River Floating Barge – Over water drilling for a Queensland Rail bridge upgrade

BMC South Walker Creek – Dam piezometers

Vibrocore (Sunshine Coast & Brisbane) - Various sand mine exploration projects and environmental testing for British Petroleum

Santos – A diverse range of rotary air and rotary mud monitoring bore projects, across many Santos locations

Logan Enhancement Project – over 80 shallow auger holes with auger rig, combined with difficult access holes up to 30m with rubber tracked rigs


Energex Gladstone & Sunshine Coast – Various bore holes to 30m for Energex Grid upgrade

NRG Power Station – Ground water monitoring holes in difficult access areas

Anglo American – Moranbah North Mine bore holes 10 – 30m

Bundaberg East Levee – 30m bore holes for new levee

Springbrook Road Failures – Emergency slope stability sites and road failures

SEQ Water Mount Crosby Treatment Plant – Low impact drilling with NMLC coring

KEYPROJECTS-2016 Toowoomba Second Range Crossing – Over 3,000m of PQ, 4C, NMLC bore holes with inclinometers, vibrating wireline piezometers and water monitoring bores

Transurban Logan Motorway upgrade – 30+ holes to 30m

Gold Coast Light Rail – Difficult access drilling with Comacchio GE0 305 in the rail corridor

Pacific Complete NSW – Swamp access bore holes up to 50m

Gateway Upgrade North – Difficult access bore holes and inclinometers with Comacchio Geo 305

BMA Blackwater – Piezometers to 30m

C2C Bruce Highway Upgrade - Over 30 bore holes to 30m

BMA Goonyella – Piezometers in Tailing Dam



[email protected]

BMA Caval Ridge – 13 bore holes to 15m

QR Rail Bridge Upgrades – Various sites throughout Queensland

Santos Scotia – Monitoring bores

BMC South Walker Creek – Creek diversion


KEYPROJECTS2006-2016Santos GLNG - 130m water monitoring bores

Banora Point Upgrade NSW – Over 2,800m drilled and cored holes for RMS NSW

BMA – Blackwater, Broadmeadow, Hay Point, Goonyella Riverside & Peak Downs

BMC – South Walker Creek & Poitrel

Rio Tinto – Gladstone

Anglo American – Aquila, Cockatoo Ridge, Mooranbah

NRG Gladstone – Various projects

QGC - Queensland

Bechtel & Santos - Curtis Island LNG

Shell LNG Gladstone Overwater - Jack up barge bore holes with packer testing for LNG pipeline

Various Floating Barge Drilling Programs –Department of Transport and Main Roads, Aurecon, Douglas, Golder etc.

Abbot Point Coal Terminal Expansion Rapid Transit Project Gold Coast

Brisbane Airport Link

WICET Gladstone

Leightons AbiGroup JV Gateway Slip – Inclinometers instrumentation, CPTs various sites



[email protected]

DRILLFLEETWe take pride in the quality and condition of our fleet. We have tracked and truck mounted rigs for land and overwater drilling.

GeoDrill Australia maintains a custom built online maintenance and project management system, second to none in Australia. This is a fully automated routine inspection system incorporating hazard identification procedures.

VEHICLEIDNUMBER VEHICLETYPE DESCRIPTION

GD01 Drilling Rig Rubber Tracked Hydrapower Scout

GD02 Drilling Rig Hydrapower Scout MAN 4x4 Truck

GD03 Drilling Rig Hydrapower Scout Isuzu 1400 Truck

GD04 Drilling Rig Rubber Tracked Hydrapower Scout

GD05 Drilling Rig Comacchio GEO 305

GD06 Drilling Rig Comacchio GEO 405

GD07 4x4 Utility Ford Ranger 1000L Water Tank

GD08 Small Truck Isuzu 300 NPS 2000L Water Tank

GD09 Tilt Tray Hino FY700 8 Wheeler Tilt Tray Truck

GD10 4x4 Utility Nissan Patrol 100L Water Tank

GD11 Small Truck Isuzu 300 NPS 2000L Water Tank

GD15 Support Track Yanmar and Water Track Machine

GD14 Light Tower 8000w Light Tower

GD17 Drilling Rig Vibrocore Mounted on Yanmar C50

GD18 Tilt Tray MAN TGM 8 Wheeler Tilt Tray Truck

GD19 Tray Truck Isuzu Fvz Series Tray Truck

GD20 Support Track Hydrapower custom built support track machine

GD21 Compressor Truck Volvo 8 Wheeler with Atlas Copco Compressor 900 CFM 350psi GD22 4x4 Utility Ford Ranger 1000L Water Tank

GD23 Small Truck Isuzu NPS 75 2000L Water Tank

GD26 Compressor Ingersoll Rand Compressor 1070 CFM 350psi

GD27 Small Truck Isuzu NPS 75 2000L Water Truck

GD28 Tilt Tray MACK Metro-Liner 8 Wheeler Tilt Tray Truck

GD30 Drilling Rig McCullochs DR950 Mounted on 8x4 DAF Truck

GD32 Humpy Humpy support trailer for GD30

GD33 Rod Sloop Rod Sloop with 12t capacity

GD34 Mud Pump Trailer mounted 6x5 American Mud Pump

GD35 Rod Sloop Rod Sloop with 15t capacity

GD36 4x4 Utility Ford Ranger Dual Cab LV



[email protected]

MANAGEMENTTEAMTOMPARTLETON–MANAGINGDIRECTORTom commenced employment in the drilling industry in 2002. During his time with the company, Tom has progressed through the ranks from a driller’s assistant, to driller and then under the company’s supervision he attained an ADITC accreditation in a Diploma of Drilling Operations. In 2017, Tom purchased the business from his father to continue the family name into the next generation of drilling.

Tom is a dedicated leader, focused on guiding staff and subcontractors to deliver high-quality projects. He consistently delivers on schedule and on budget. Tom’s focus on teamwork, safety culture and stakeholder relationships are strongly aligned with GeoDrill Australia’s company values.

QUALIFICATIONS:

• Diploma in Drilling Operations • Diploma in Work Health and Safety • Certificate IV in Training and Assessment • QLD Licensed Driller Class 1

• NSW Licensed Driller Class 2 • Licensed Drilling Assessor • Bachelor of Economics – QUT

DAVIDDORRETT–DRILLING&OPERATIONSMANAGERDavid has worked in the drilling industry for over 15 years. Starting out as a drilling offsider, David has progressed to work in a number of supervisory and management roles within the industry. He is passionate about drilling with extensive experience and understanding of drilling techniques and the industry.

David is responsible for ensuring the drilling programs, policies and instructions are properly directed and communicated to the drilling teams. He provides his expert knowledge and technical support to the drilling teams and ensures activities are undertaken safely and in a cost effective and timely manner. David is consistently looking for opportunities to improve process, in turn providing for time and cost savings for our clients.

QUALIFICATIONS:

• Certificate III in Drilling Operations• QLD Licensed Driller Class 1 • Certificate IV in Work Health and Safety

MAXJELF–HEALTH&SAFETYMANAGERMax is a committed Health & Safety Manager, with over 12 years experience in the drilling industry. He is passionate about caring for our team and ensuring the company is fully compliant with current health and safety legislation whilst delivering high levels of customer service with compliance and efficiency.

QUALIFICATIONS:• Certificate III in Drilling Operations • QLD Licensed Driller Class 1 (Rotary Air & Mud)

EMMAPARTLETON–GENERALMANAGEREmma has been with GeoDrill Australia for over 6 years. She provides vision and strategic acumen to strengthen the management team to ensure optimum performance. Emma sets the corporate approach of GeoDrill Australia and implements that through a comprehensive business plan that further breaks down into strategy and planning that supports the long term objectives, mission and vision of GeoDrill Australia.

QUALIFICATIONS:

• Bachelor of Business – QUT



[email protected]

HEALTH,SAFETY&ENVIRONMENT

SAFETY

At GeoDrill Australia we are committed to Occupational Health and Safety, so that we can provide every client, employee, contractor or visitor with a safe and healthy working environment. This is reflected in our Occupational Health & Safety (OHS) management system that is continually updated. We are always developing and improving all of our Health & Safety procedures within the company, to ensure a ‘No Injury’ outcome. We strive for zero lost time and zero accidents, which we achieve through our health & safety plan, safe working procedures, risk assessments, and method statements.

ENVIRONMENTALMANAGEMENT

Consistent with our vision and values, GeoDrill Australia recognises the importance of both natural resource stewardship and care of the environment for the benefit of present and future generations. We are committed to undertaking activities in an environmentally responsible manner and effectively managing any risk that may impact the environment.

GeoDrill Australia will manage its work activities in a manner that minimises adverse environmental impacts, promote sustainability and encourage continual improvement in environmental performance through learnings from past performance and collaboration with environmental regulators.

We are committed to:

■ Continual improvement of our environmental performance against all applicable environmental legislation, regulations and standards to which the Company subscribes;

■ Maintaining compliance with environmental management processes in accordance with ISO 14001; ■ Regularly assessing and auditing of the effectiveness of our environmental management processes; ■ Promoting sustainability through efficient use of natural resources and energy, including reuse or

recycling of waste resources where appropriate. ■ Giving purchase preference, where feasible, to reusable, recycled and environmentally-friendly products; ■ Promoting a culture where employees and service providers can identify, mitigate and report any

potential environmental hazards and risks; ■ Ensuring our employees and stakeholders are appropriately informed of our policies, management

systems, procedures, accountabilities and performance; ■ Understanding and managing our environmental risks with the goal of minimising or eliminating those

risks; and by ■ Complying with all applicable legal and regulatory requirements.

IFYOUHAVEAPROJECTORBUSINESSENQUIRY,PLEASECONTACTUS.

GEODRILLAUSTRALIA

Geotechnical, Environmental & Water Bore Drilling Specialists

+61 405 708 211 [email protected]

www.geodrillaustralia.com.au

geodrill australia capability statement august 2019

Documents