general information - t.f. meliamar 12, 2020 · 1) prior approval from t.f. melia associates. 2)...
TRANSCRIPT
STOCK CATALOG2020
www.TFMelia.com
GENERAL INFORMATION
DIRECTIONS TO WAREHOUSEFrom I-91 South• Exit 21• Turn right at light and next right onto Sebethe Drive• 3/4 mile take second left onto Progress Drive• 3rd building on left
From I-91 North• Exit 21• Turn right at light and at second light right onto Sebethe Drive• 3/4 mile take second left onto Progress Drive• 3rd building on left
ALL PRICES ARE LIST UNLESS OTHERWISE NOTED. NET PRICING IN RED.
TERMS OF PAYMENTNET 30 days from invoice date.We accept MasterCard, Visa and American Express.
ORDERS RECEIVED BEFORE 1:00 PM WILL SHIP THE SAME DAY.
RETURN POLICYSpecial orders which are not stock cannot be returned.Stock items can only be returned under the following conditions: 1) Prior approval from T.F. Melia Associates. 2) Material must be in original box and in good condition. 3) Credit based on original selling price less restocking charge.
CONTACTSTom Melia Jr., Sales [email protected] Walkley, Sales [email protected] Shaw, Warehouse Sales [email protected] Coen, Sales [email protected]
9 Progress Drive • Cromwell, CT 06416(860) 635-2449 • Fax (860) 635-2359www.TFMelia.com
372
91
TABLE OF CONTENTS
1
PRODUCT PAGE
VAV Diffusers ...........................................................................2Architectural Diffusers ...........................................................3Pattern Diffusers .................................................................. 4-5Full Face Diffusers ...................................................................6Perforated Diffusers ................................................................7Linear Diffusers/Plenums ......................................................8Round Diffusers ......................................................................9Seiho ..........................................................................................9Louvered Grilles ............................................................... 10-11Supply Registers ....................................................................12Eggcrate Grilles ...................................................................... 13Curved Light Shield .............................................................. 13Frames ..................................................................................... 14Dampers.................................................................................. 15VAV Terminals and Controls .............................................. 16Radiation Dampers ............................................................... 17Power / Balance SystemTM ............................................... 18-19Transitions ..............................................................................20Spiral Grilles ........................................................................... 21Spiral Duct and Gasketed Fittings .................................22-23Taps .........................................................................................24
STOCK CATALOG2020
www.TFMelia.com
VAV DIFFUSERS
2
T3SQ-4Thermally Powered
Heating/Cooling VAV Diffuser
Uses OMNI Backpan and Face Separate Heating/Cooling Setpoints
Minimum Flow Setting
CFM @ .15 inlet SP
175
300
400
500
NECK SIZE
6”
8”
10”
12”
$475 NET (No Discount)
www.TFMelia.com
ARCHITECTURAL DIFFUSERS
3
TITUS® Submittal D-OMNI-NT 5-1-95
Architectural Ceiling DiffusersSteel • Architectural • Square Panel • Horizontal Air PatternModel: OMNI-NT • Narrow Tee • Round Neck
Dimensions are in inches.
(Please see reverse side.)D-35.5-S
Nominal Round Duct Size B
B minus 1/8"
23 3/8"18"
24"
1/4"
C
D
3/8"
Ceiling ModuleA
Nominal RoundDuct Size B C D
6, 8 1 1/4 3 3/4
10, 12, 14, 15 1 3/8 3 7/8
Inlet View ShowingFlex Duct Connectionand T-Bars by Others
5/16
1 7/8
9/16
Narrow Tee Detail
24 x 24
OMNI-3 / OMNI-NT• Architectural plaque diffuser with double thickness face panel provides mar-free finish.• Highest quality in the industry.• 360 degree diffusion pattern is excellent for VAV cooling applications.• 14” and 15” sizes are suitable as plenum return grilles.• 12 x 12 modules require TRM mounting frame. $20 each• Provided with earthquake mounting tabs.• Model DB directional blades. $6 each• Available in all aluminum construction for MRI rooms. Call for availablity.
CFM @ 30 NC
0-100
101-250
0-175
176-275
276-450
451-600
601-850
851-1000
SIZES
(12 x 12) - 6”
(12 x 12) 8”
6”
8”
10”
12”
14”
15”
OMNI-3
$62
$62
$100
$100
$100
$100
$100
$100
OMNI-NT
NA
NA
$110
$110
$110
$110
$110
$110
D-100 DAMPER
$22
$24
$22
$24
$24
$28
$40
NA
www.TFMelia.com
PATTERN DIFFUSERS
4
Square and Rectangular Ceiling DiffusersSteel • Louvered Face • High CapacityModel: TDC • Square, Rectangle or Round Neck
Submittal D-TDC 11-11-02
Border Type 2 (Snap-In)
Border Type 1 (Surface Mount) Square or Rectangular Neck
Border Type 1 (Surface Mount) Round Neck
Border Type 3 (Lay-In) Border Type 4 (Spline)
For Dimensions “A” see table on next page. Dimensions are in inches. D-38.0-S
Duct Size A
Ceiling Opening = A plus 3 1/2"
Duct Size minus 1/8"
2 1/8"
A plus 5 9/16"
1 1/2"1/4"
Duct Size, Diameter
A
1/4"1 1/2"
A plus 5 9/16"
Duct Size minus 1/8"
Ceiling Opening = A plus 3 1/2"
1 3/8"
3 7/8"
Ceiling Module
13/16"
2 1/8"
Ceiling Module minus 1/4"
Ceiling Module
2 1/8"
Ceiling Module
3/8"
3/8"
2 1/8"
(Please see reverse side).
Border Types, Dimensions (Continued)
† See Page 3
Border Type 5 (Dropped Face)
2
Border Type 6 (Beveled Drop Face)*Note: Dimension A refers to eithersquare/rectangle or round neck diffusers.See drawings below.
Available Duct Sizes, Square and Rectangular Necks
Available Duct Sizes, Round Necks
AvailableModule
Size
Border Type 2,3,4
MinimumA
AvailableRnd. Duct
Size
6 x 6 6
9 x 9 6, 8
6 x 6 6
9 x 9 6, 8
24 x 24 12 x 12 8, 10, 12
15 x 15 12, 14
18 x 18 6, 8, 1012, 14, 16
12 x 12
AvailableModule
Size
Border Type 2, 3, 4MinimumDuct Size
A
MaximumDuct Size
A
12 x 12 6 x 6 9 x 9
24 x 24 6 x 6 21 x 21
48 x 24 12 x 12 45 x 21
Border Type 1, 5, 6MinimumDuct Size
A
MaximumDuct Size
A
6 x 6 48 x 48
Note: Duct sizes are available in 3” increments only.Maximum duct size for border 5 is 36 x 36.
*Note: Round duct sizes are available only in sizes shown.
Border Type 1, 5, 6
DimensionsA
Available RoundDuct Size
6 x 6 6
9 x 9 6, 8
12 x 12 8, 10, 12
15 x 15 6, 8, 10, 12, 14
18 x 18 6, 8, 10, 12, 14, 16
Duct Size
* A plus 5 1/2"
7/16"
plus 1/4"
2 1/2"
Duct size
* A plus 5"
7/8"
2 1/8"
plus 1"
SizeA
Duct size
A
† Note: Standard diffuser is 2 1/2 deep.Optional 4” deep diffuser is available.
Model TDC-1 / TDC-6• Available as 1-way, 2-way, 2-way corner, 3-way or 4-way• Border 1 is flush mounted.• Border 6 is surface mounted.• One piece backpan for a clean look.• Cores are interchangeable.• Size 18 x 18 available in 4-way pattern only.
TDC-6
TDC-1
CFM @ 30 NC
0-100
101-250
251-400
401-750
751-1250
NECK SIZE
6 x 6
9 X 9
12 x 12
15 x 15
18 x 18
TDC-1/6
$52
$62
$82
$104
$130
www.TFMelia.com
PATTERN DIFFUSERS
5
Square and Rectangular Ceiling DiffusersSteel • Louvered Face • High CapacityModel: TDC-NT • Narrow Tee • Square, Rectangular or Round Neck
Submittal D-TDC-NT 11-11-02
Border Type 3 (Lay-In) Square or Rectangular Neck
(Please see reverse side.)Dimensions are in inches.
Border Type 3 (Lay-In) Round Neck
1 7/8"
5/16"
9/16"
3/8" 23 3/8"
24"
1 1/2"
Duct Size A
Duct Size minus 1/8"
2 1/8"
1 1/2"3/8"
24"23 3/4"
Duct
Duct Size minus 1/8"
B-Diameter
A
1 3/8"
3 7/8"
Narrow Tee Detail
AvailableModule
Size
DimensionA
AvailableRnd. Duct
Size B6 x 6 6
9 x 9 6, 8
24 x 24 12 x 12 8, 10, 12
15 x 15 12, 14
18 x 18 6, 8, 1012, 14, 16
AvailableModule
Size
MinimumDuct Size
MaximumDuct Size
24 x 24 6 x 6 18 x 18
Note: Duct sizes are available in 3” increments only.
D-38.5-S
Duct Size
AB
Model TDC-3 / TDC-NT / TDV• Available as 1-way, 2-way, 2-way corner, 3-way or 4-way• Excellent diffusers for overhead heating• 24 x 24 modules with factory sq/rds• TDV with induction vanes available in 4-way pattern only• TDC-3 18 x 18 and 21 x 21 available in 4-way pattern only
Border Type NT (Narrow Tee) Round Neck
CFM @ 30 NC
0-100
101-250
251-400
401-600
601-750
751-1350
900-1750
NECK SIZES
6 x 6 - 6”
9 x 9 - 8”
12 x 12 - 10”
15 x 15 - 12”
15 x 15 - 14”
18 x 18
21 x 21
TDC-3Lay-In
$94
$104
$130
$166
$166
$162
$230
TDC-NTNarrow Tee
$129
$139
$165
$199
$199
NA
NA
D-100DAMPER
$22
$24
$24
$28
$40
NA
NA
TDV4-way only
$106
$124
$160
$210
NA
NA
NA
www.TFMelia.com
FULL FACE DIFFUSERS
6
Model TMS Full Face Lay-In Diffuser• 360 Degree diffusion pattern is excellent for VAV cooling applications.• Provides uniform look for all neck sizes.• Provided with earthquake mounting tabs.• 12 x 12 modules require TRM mounting frame. $20 each
CFM @ 30 NC
0-100
101-250
0-175
176-275
276-450
451-600
601-850
NECK SIZES
(12 x 12) - 6”
(12 x 12) - 8”
6”
8”
10”
12”
14”
TMS -3
$54
$54
$88
$88
$88
$88
$88
D-100 DAMPER
$22
$24
$22
$24
$24
$38
$40
www.TFMelia.com
PERFORATED DIFFUSERS
7
Model PSS Perforated Lay-In Diffuser• Perforated flush face diffuser with removable face• Adjustable pattern controller located in the neck• Excellent choice as a VAV cooling diffuser
Model PAR Perforated Lay-In Return• Perforated flush face return• Matches model PSS supply• Size 22 x 22 available with round necks: 6, 8, 10, 12, 14.
Model PXP Perforated Lay-In Return• Perforated panel only• Economical non ducted plenum return
CFM @30 NC
0-125
0-125
126-250
251-350
351-500
501-650
NECKSIZES
(12 x 12) - 6”
6”
8”
10”
12”
14”
PSS -3
$80
$80
$80
$80
$80
$80
D-100DAMPER
$22
$22
$24
$24
$28
$40
CFM @ 30 NC
0-1250
1251-2000
NECK SIZES
24 x 12
24 x 24
PXP
$28
$38
CFM @ 30 NC
0-250
0-1250
1251-2000
NECK SIZES
(12 x 12) 10 x 10
22 x 10
22 x 22
PAR
$62
$76
$78
www.TFMelia.com
ML-39 • Adjustable pattern controllers provide both vertical and horizontal air patterns and volume control.• Perfect for perimeter heating/cooling applications. • 2 ft. and 4 ft. lengths lay-in to standard grid or can be surface mounted.• 6FT MLF-39 is designed to be field cut and can be combined for continuous appearance.
LINEAR DIFFUSERS/PLENUMS
8
MPI-39 / MPI-39-NT• Insulated plenums to fit ML-39 linears• Available in 2 ft. and 4 ft. lengths. Width = 4 1/8” Height = 9”• 4’ length w/ 8” inlet • 2’ length w/ 6” or 8” inlet
TITUS® Submittal D-ML-NT 5-1-95
Linear Slot DiffusersAluminum • Modulinear • Narrow TeeModels: ML-37-NT • 1/2” Slot • Supply
ML-38-NT • 3/4” Slot • SupplyML-39-NT • 1” Slot • SupplyMLR-37-NT • 1/2” Slot • ReturnMLR-38-NT • 3/4” Slot • ReturnMLR-39-NT • 1” Slot • Return
Dimensions are in inches.
1 7/8
5/16
9/16
SupplyModel
ML-37-NT S = 1/2”ML-38-NT S = 3/4”ML-39-NT S = 1”
ReturnModel
MLR-37-NT S = 1/2”MLR-38-NT S = 3/4”MLR-39-NT S = 1”
Narrow Tee Detailof End Cap
S
S
S
S
(Please see reverse side.)D-3.5-S
ML-39-NT• Adjustable slot diffuser that integrates with narrow tee grid.• Vertical and horizontal air pattern is excellent for perimeter heating and cooling applications.
CFM @ 30NC
0-100
100-200
0-300
LENGTH
2 ft.
4 ft.
6 ft.
ML-39 (1”)2 SLOT
$84
$170
$240
MPI-39 (1”)2 SLOT
$78
$84
NA
CFM @ 30NC
0-100
LENGTH
2 ft.
ML-39-NT (1”) 2 SLOT
$78
www.TFMelia.com
ROUND DIFFUSERS
9
Model TMR• Surface or duct mounted 3 cone diffuser• 360 degree pattern
Model SFZ C• Aluminum dryer vent cap• Integral backdraft damper• Clear anodized finish
4” $46 NET6” $88 NET
Model SFB• Aluminum dryer vent• Backdraft flapper damper• Clear anodized finish
4” $48 NET6” $82 NET
Model SXN• Aluminum Vent Louver with insect sreen • Clear anodized finish
4” $30 NET6” $48 NET8” $66 NET
®
CFM@ 30 NC
0-200
201-300
301-450
451-600
601-850
NECK SIZE
6”
8”
10”
12”
14”
TMR
$140
$150
$180
$200
$220
DamperD-100
$22
$24
$24
$28
$40
www.seiho.com
www.TFMelia.com
LOUVERED GRILLESModel 350RL • 3/4” blade spacing• Lay-in grilles without screwholes• Steel construction• White finish
CFM @30 NC
125
125
175
250
135
200
250
350
150
250
300
400
500
275
375
475
700
340
450
550
700
800
475
650
800
NECKSIZE
6 x 6
8 x 4
8 x 6
8 x 8
10 x 4
10 x 6
10 x 8
10 x 10
12 x 4
12 x 6
12 x 8
12 x 10
12 x 12
14 x 6
14 x 8
14 x 10
14 x 14
16 x 6
16 x 8
16 x 10
16 x 12
16 x 16
18 x 8
18 x 10
18 x 12
350RL
$20
$24
$24
$30
$24
$30
$30
$36
$30
$30
$36
$36
$38
$36
$36
$38
$48
$36
$38
$42
$48
$56
$38
$48
$48
CFM @30 NC
900
425
1000
750
600
745
900
1100
1200
1400
900
1300
1100
1275
1700
2200
750
1250
2000
NECKSIZE
18 x 18
20 x 6
20 x 20
22 x 10
24 x 8
24 x 10
24 x 12
24 x 16
24 x 18
24 x 24
30 x 12
30 x 18
36 x 12
36 x 18
36 x 24
48 x 24
LAY-INS
22 x 10
22 x 22
46 x 22
350RL
$70
$38
$84
$48
$48
$52
$56
$74
$84
$110
$74
$108
$90
$130
$180
$200
$48
$90
$190
10www.TFMelia.com
LOUVERED GRILLES
Model 355RL• 1/2” blade spacing• Lay-in grilles without screwholes• Steel construction• White finish
Model 355RL-NT• Designed to fit narrow tee/bolt slot ceilings• 1/2” blade spacing• Steel construction• White finish
Model 350RLF1• Lay-in filter grille• 1250-1500 CFM• 24 x 24 module 20 x 20 neck• Filter not included.
Border Type 1 - Narrow Tee
CFM @30 NC
125
225
350
450
650
800
1000
750
1250
NECKSIZE
6 x 6
8 x 8
10 x 10
12 x 12
14 x 14
16 x 16
18 x 18
LAY-INS
22 x 10
22 x 22
355RL
$24
$38
$42
$48
$60
$70
$88
$60
$120
CFM @ 30 NC
450
1250
NECK SIZES
22 x 10
22 x 22
355 RL-NT
$60
$120
$160
11www.TFMelia.com
SUPPLY REGISTERS
12
Model 300RS Supply Register• Double deflection supply register• Opposed blade damper• 3/4” blade spacing• Steel construction• White finish
CFM @ 600FPM
90
115
115
150
220
150
200
260
350
150
245
340
430
525
290
390
500
550
340
450
575
725
NECKSIZE
6 x 4
6 x 6
8 x 4
8 x 6
8 x 8
10 x 4
10 x 6
10 x 8
10 x 10
12 x 4
12 x 6
12 x 8
12 x 10
12 x 12
14 x 6
14 x 8
14 x 10
14 x 12
16 x 6
16 x 8
16 x 10
16 x 12
300RS
$56
$60
$56
$62
$68
$60
$68
$70
$76
$68
$70
$76
$82
$88
$78
$84
$90
$100
$84
$92
$100
$112
CFM @ 600FPM
375
525
665
810
1240
430
550
735
525
725
890
1090
2250
665
895
1100
1375
810
1090
1375
1650
NECKSIZE
18 x 6
18 x 8
18 x 10
18 x 12
18 x 18
20 x 6
20 x 8
20 x 10
24 x 6
24 x 8
24 x 10
24 x 12
24 x 24
30 x 6
30 x 8
30 x 10
30 x 12
36 x 6
36 x 8
36 x 10
36 x 12
300RS
$92
$100
$112
$120
$162
$100
$106
$118
$112
$120
$134
$144
$266
$140
$156
$174
$192
$168
$192
$212
$228
www.TFMelia.com
EGGCRATE GRILLES
13
Model 50F• 1/2 x 1/2 x 1/2 cube core• Aluminum• White finish
CFM @ 30 NC
150
275
475
750
900
1200
1600
1000
2500
1000
2500
5000
NECK SIZE
6 x 6
8 x 8
10 x 10
12 x 12
14 x 14
16 x 16
18 x 18
24 x 12
24 x 24
LAY-INS
22 x 10
22 x 22
46 x 22
50 F
$30
$38
$44
$50
$66
$74
$88
$80
$136
$68
$116
$250
Model CLS-L• 22 ga. steel construction, factory curved• 10.5” high• Mounting holes on each corner for secure installation• 1/2” insulation with sound attenuating properties
NET $35
CURVED LIGHT SHIELD
www.TFMelia.com
Grilles, Registers and Diffusers • AccessoriesAluminumModel: TRM • TITUS Rapid Mount Frame
TITUS® Submittal ABD-TRM 3-7-97
General Description• Model TRM TITUS Rapid Mount Frameallows T-bar, lay-in type diffusers (border Type3) to be installed in surface mounting applica-tions (border Type 1).
• TRM frame is installed in opening andsecured in place using security clips. Screwsare mounted flush in frame mounting holes.
• Rapid Mount Frame can be mounted inplaster or sheet rock ceiling.
• The TRM can be used to access ceilingplenum. Diffuser with flex connection can belifted out of frame to access ceiling space.
• Material is aluminum with steel fasteners.
Standard Finish: #26 White.
TITUS®990 Security Row • Richardson, Texas 75081 • 972-699-1030 • Fax 972-918-8880
ABD-23.0-S
All rights reserved. No part of this work may be reproduced or transmitted in any form or any means, electronic or mechanical, including photocopying and recording, or by any information storage retrieval system without permission in writing from Tomkins Industries, Inc.
Note: This submittal is meant to demonstrate general dimensions of this product. The drawings on this submittal are not meant to detail everyaspect of the product with exactness. Drawings are not to scale. TITUS reserves the right to make changes without written notice.
Clip is adjustable up and downto fit varying ceiling thicknesses.
CeilingModule
12 x 12 12 1/2 12 1/2
16 x 16 16 1/2 16 1/2
20 x 20 20 1/2 20 1/2
24 x 12 24 1/2 12 1/2
24 x 24 24 1/2 24 1/2
36 x 24 36 1/2 24 1/2
48 x 12 48 1/2 12 1/2
48 x 24 48 1/2 24 1/2
60 x 12 60 1/2 12 1/2
B C
*Recommended Ceiling Opening
(Check actual dimensions before installation.)
Frame Detail
FRAMES
14
Grilles, Registers and Diffusers • AccessoriesAluminumModel: TRM • TITUS Rapid Mount Frame
TITUS® Submittal ABD-TRM 3-7-97
General Description• Model TRM TITUS Rapid Mount Frameallows T-bar, lay-in type diffusers (border Type3) to be installed in surface mounting applica-tions (border Type 1).
• TRM frame is installed in opening andsecured in place using security clips. Screwsare mounted flush in frame mounting holes.
• Rapid Mount Frame can be mounted inplaster or sheet rock ceiling.
• The TRM can be used to access ceilingplenum. Diffuser with flex connection can belifted out of frame to access ceiling space.
• Material is aluminum with steel fasteners.
Standard Finish: #26 White.
TITUS®990 Security Row • Richardson, Texas 75081 • 972-699-1030 • Fax 972-918-8880
ABD-23.0-S
All rights reserved. No part of this work may be reproduced or transmitted in any form or any means, electronic or mechanical, including photocopying and recording, or by any information storage retrieval system without permission in writing from Tomkins Industries, Inc.
Note: This submittal is meant to demonstrate general dimensions of this product. The drawings on this submittal are not meant to detail everyaspect of the product with exactness. Drawings are not to scale. TITUS reserves the right to make changes without written notice.
Clip is adjustable up and downto fit varying ceiling thicknesses.
CeilingModule
12 x 12 12 1/2 12 1/2
16 x 16 16 1/2 16 1/2
20 x 20 20 1/2 20 1/2
24 x 12 24 1/2 12 1/2
24 x 24 24 1/2 24 1/2
36 x 24 36 1/2 24 1/2
48 x 12 48 1/2 12 1/2
48 x 24 48 1/2 24 1/2
60 x 12 60 1/2 12 1/2
B C
*Recommended Ceiling Opening
(Check actual dimensions before installation.)
Frame Detail
Model TRM Frame• Allows the easy installation of lay-in diffusers in sheetrock ceilings.• Allows access to balancing dampers.• Can be used to mount TDC frame style 1 diffusers in sheetrock.
6 x 6 TDC-1 use 12 x 12 frame9 x 9 TDC-1 use 15 x 1512 x 12 TDC-1 use 18 x 18
SIZE
12 x 12
15 x 15
18 x 18
24 x 12
24 x 24
48 X 24
ROUGHOPENING
12.5 x 12.5
15.5 x 15.5
18.5 x 18.5
24.5 x 12.5
24.5 x 24.5
48.5 X 24.5
TRM
$40
$50
$50
$50
$50
$100
www.TFMelia.com
DAMPERS
15
Model D-100
Model AG-15
Model AG-95
D-100 ROUND DAMPERS
6”
$22
8”
$24
10”
$24
12”
$28
14”
$40
AG-95 DIFFUSER DAMPERS
9 x 9
$22
12 x 12
$28
15 x 15
$50
18 x 18
$76
21 x 21
$92
6 x 6
$18
AG-15 GRILLE DAMPERS
8 x 8
$24
10 x 10
$26
12 x 12
$30
14 x 14
$38
16 x 16
$44
18 x 18
$48
22 x 10
$44
22 x 22
$60
6 x 6
$20
www.TFMelia.com
VAV TERMINALS
16
Model DESV Bare Box• No controls, no actuator• Includes multipoint inlet sensor• Control enclosure included• Stocked with Eco-Shield (Natural Fiber Duct Liner)
Transformers 120/24 $28 NET
Model PESV Pneumatic• Pressure independent• Pneumatic actuator included• Titus II controller is field adjustable to NC/NO and DA/RA• Thermostat not included
Titus II Replacement Controller $165 NET Pneumatic Replacement Actuator $62 NET
INLETSIZE
6”
8”
10”
12”
14”
16”
CFMRANGE
85-500
145-900
230-1400
325-2000
450-3000
580-4000
OUTLET DIMENSION
12 x 8
12 x 10
14 x 12.5
16 x 15
20 x 17.5
24 x 18
DESV(bare box)
$300
$360
$380
$390
$490
$520
PESV
$644
$708
$724
$736
$844
NA
2 ROWHW COIL
$220
$280
$380
$348
$497
$553
INCLUDES:• Titus Alpha BACnet controller• Titus STE8001 digital wall sensor• 75 ft. of RJ45 cable for sensor• 120/24 volt transformer• Standalone or networked to other BACnet devices• Disconnect switch $985 NET
SINGLE DUCT COOLING/REHEAT• Configurable at thermostat• No software required• Balancing at thermostat
DIGITAL DISPLAY SENSOR• Commissioning capability (cfms, unit type)• No software required• Password capable
Titus Alpha BACnet Conroller Package
www.TFMelia.com
(use with Titus DESV)SOLD SEPARATELY
RADIATION DAMPERS
Model C-FS• 212° link• 3-4 hour UL lisitng
Model C-RD• 212° link• 3-4 hour UL lisitng
Model CK-2000 Thermal Blanket• Lightweight• Non-asbestos• Cut openings to size
LIST
$60
$72
$74
$90
SIZES
6”
8”
10”
12”
LIST
$168
$120
SIZES
22 X 22
22 X 10
LIST
$50
SIZES
24 X 24 X 1/8
17www.TFMelia.com
POWER / BALANCE SYSTEM ™
18
Models i-3 / i-4Models i-3 and i-4 were developed for air balancing at the mid/duct above inaccessible ceilings with adjustments accomplished by hand-held power packs.
www.TFMelia.com
POWER / BALANCE SYSTEM ™
19
CALL FOR PRICING
www.TFMelia.com
TRANSITIONS
20
Square to Rounds• 3” Deep square to round transitions for diffusers and grilles• Highest quality available• 24 gauge steel • Welded construction• Interiors painted black
PRICES ARE NET (No Discount)
SQUARE SIZE
6 x 6
8 x 8
9 x 9
10 x 10
12 x 12
14 x 14
15 x 15
16 x 16
18 x 18
22 x 10
22 x 22
ROUND NECK
4, 5, 6
6, 7, 8
6, 7, 8, 9
6, 8, 9, 10
6, 7, 8, 9, 10, 12
8, 10, 12, 14
12, 14
10, 12, 14, 16
12, 14, 16, 18
6, 8, 10
6, 8, 10, 1214, 16, 18
NET PRICE
$11
$12
$13
$14
$14
$16
$16
$18
$22
$24
$28
ROUNDTO ROUNDS
6 / 5
8 / 6
8 / 7
10 / 8
10 / 9
12 / 8
12 / 10
14 / 12
$7
$8
$8
$10
$10
$11
$11
$12
NET PRICE
www.TFMelia.com
21
SPIRAL GRILLES
.RAYMON SUBMITTAL SHEET SPG SPIRAL GRILLES
MODELS SPG-H, SPG-V, SPG-HV, SPG-VH
SINGLE DEFLECTION SUPPLY (SPG-V SHOWN)
I @ LISTED SIZE + 1 3/4
�
L LISTED SIZE+ 1 3/4 __J D SPG-H HORIZONTAL BLADES D SPG-V VERTICAL BLADES
_J 9 yPADJUSTABLE
e ., AIR SCOOP
� (OPTIONAL)
*LISTED SIZE= DUCT SIZE AND ROUGH OPENING SIZE
DOUBLE DEFLECTION SUPPLY (SPG-VH SHOWN)
I @ LISTED SIZE + 1 3/4
_J L LISTED SIZE+ 1 3/4 __J D SPG-HV HORIZONTAL FRONT BLADES D SPG-VH VERTICAL FRONT BLADES
HEIGHT 3 4 6 8
DUCT DIAMETER 6/36 8 /36 10 / 36 12 / 36 MIN.IMAX.
WIDTH 10 / 48 14 / 48 MIN.IMAX.
10
14 / 36
16 / 48
12
16 / 36
18/ 48
WIDTHS ARE AVAILABLE IN 2" INCREMENTS FROM 10 TO 48".
STANDARD INDUSTRY TOLERANCES APPLY. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
JOB NAME:
LOCATION: ____________ _
ARCHITECT: ____________ _
ENGINEER: _____________ _
CONTRACTOR: ___________ _
9 yP ADJUSTABLEe ., AIR SCOOP
�
FEATURES • 24 GA. GALVANIZED STEEL CONSTRUCTION• TRUE FORM CURVED FACE• MILL FINISH GALVANIZED STANDARD • POWDER COAT FINISHES AVAILABLE• INDIVIDUALLY ADJUSTABLE BLADES,¾ SPACING• COUNTERSUNK SCREW HOLES ARE STANDARD • INSTALLED FULL PERIMETER FOAM GASKET SEAL
OPTIONS {SPECIFY) __ MODEL (EX: SPG-VH) __ LISTED SIZE (EX: 12X6) 2" INCREMENTS TO MAX. 48" __ DUCT DIAMETER (EX: 18)
D ADJUSTABLE AIR SCOOP D STANDARD MILL FINISH GALVANIZED D POWDER COAT WHITE FINISH D POWDER COAT SILVER FINISH D POWDER COAT BLACK FINISH D POWDER COAT PRIMER FINISH
MODEL SPG SPIRAL DUCT GRILLES
DRAWN BY: CAN DATE: 8-30-16 DWG. NO. SPG
RAYMON P.O. BOX 250 ALBION, IOWA 50005 www.raymon-hvac.com
Double Deflection Supply(SPG-VH Shown)• 24 Ga. galvanized steel construction• True form curved face• Mill finish galvanized steel standard • Powder coat paint finishes available in standard colors at no extra charge• Individually adjustable blades,¾ spacing• Countersunk screw holes are standard • Installed full perimeter foam gasket seal
SPG-HV Horizontal Front BladesSPG-VH Vertical Front Blades
.RAYMON SUBMITTAL SHEET SPG SPIRAL GRILLES
MODELS SPG-H, SPG-V, SPG-HV, SPG-VH
SINGLE DEFLECTION SUPPLY (SPG-V SHOWN)
I @ LISTED SIZE + 1 3/4
�
L LISTED SIZE+ 1 3/4 __J D SPG-H HORIZONTAL BLADES D SPG-V VERTICAL BLADES
_J 9 yPADJUSTABLE
e ., AIR SCOOP
� (OPTIONAL)
*LISTED SIZE= DUCT SIZE AND ROUGH OPENING SIZE
DOUBLE DEFLECTION SUPPLY (SPG-VH SHOWN)
I @ LISTED SIZE + 1 3/4
_J L LISTED SIZE+ 1 3/4 __J D SPG-HV HORIZONTAL FRONT BLADES D SPG-VH VERTICAL FRONT BLADES
HEIGHT 3 4 6 8
DUCT DIAMETER 6/36 8 /36 10 / 36 12 / 36 MIN.IMAX.
WIDTH 10 / 48 14 / 48 MIN.IMAX.
10
14 / 36
16 / 48
12
16 / 36
18/ 48
WIDTHS ARE AVAILABLE IN 2" INCREMENTS FROM 10 TO 48".
STANDARD INDUSTRY TOLERANCES APPLY. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
JOB NAME:
LOCATION: ____________ _
ARCHITECT: ____________ _
ENGINEER: _____________ _
CONTRACTOR: ___________ _
9 yP ADJUSTABLEe ., AIR SCOOP
�
FEATURES • 24 GA. GALVANIZED STEEL CONSTRUCTION• TRUE FORM CURVED FACE• MILL FINISH GALVANIZED STANDARD • POWDER COAT FINISHES AVAILABLE• INDIVIDUALLY ADJUSTABLE BLADES,¾ SPACING• COUNTERSUNK SCREW HOLES ARE STANDARD • INSTALLED FULL PERIMETER FOAM GASKET SEAL
OPTIONS {SPECIFY) __ MODEL (EX: SPG-VH) __ LISTED SIZE (EX: 12X6) 2" INCREMENTS TO MAX. 48" __ DUCT DIAMETER (EX: 18)
D ADJUSTABLE AIR SCOOP D STANDARD MILL FINISH GALVANIZED D POWDER COAT WHITE FINISH D POWDER COAT SILVER FINISH D POWDER COAT BLACK FINISH D POWDER COAT PRIMER FINISH
MODEL SPG SPIRAL DUCT GRILLES
DRAWN BY: CAN DATE: 8-30-16 DWG. NO. SPG
RAYMON P.O. BOX 250 ALBION, IOWA 50005 www.raymon-hvac.com
www.TFMelia.com
HEIGHT
3”
4”
6”
8”
10”
12”
10”WIDTH
$116
$120
$128
$134
$136
$144
12”WIDTH
$120
$124
$134
$138
$144
$154
14”WIDTH
$124
$128
$138
$144
$154
$164
16”WIDTH
$130
$134
$144
$154
$164
$172
18”WIDTH
$134
$138
$148
$160
$172
$182
20”WIDTH
$136
$142
$154
$164
$174
$188
22”WIDTH
$142
$146
$158
$168
$182
$194
24”WIDTH
$146
$150
$164
$174
$188
$202
26”WIDTH
$150
$154
$168
$178
$194
$206
28”WIDTH
$154
$158
$172
$184
$196
$216
30”WIDTH
$158
$162
$176
$192
$204
$220
32”WIDTH
$162
$168
$184
$196
$210
$228
34”WIDTH
$168
$172
$190
$202
$214
$234
36”WIDTH
$172
$176
$194
$208
$222
$240
2 WEEK LEAD TIMEADD 20% FOR 1 WEEK LEAD TIME
MINIMUM ORDER - $100
SPIRAL DUCT AND GASKETED FITTINGS• Locally Made• Gasketed and Non-Gasketed Fittings• Quick Turnaround• Delivery Available• Custom Lengths• Galvanized, Stainless Steel, Aluminum, PVC Coated and Paint Grip• Double Wall and Flat Oval
SIZEDIA.
6”
7”
8”
9”
10”
12”
14”
16”
18”
20”
22”
24”
26”
28”
30”
32”
34”
36”
38”
40”
42”
44”
SPIRALPIPE
per 10 ft.
$44
$50
$54
$60
$74
$82
$98
$116
$132
$194
$216
$238
$260
$282
$302
$396
$422
$446
$474
$504
$526
$758
ENDCAP
$24
$24
$26
$32
$32
$34
$38
$44
$56
$62
$72
$82
$96
$110
$124
$142
$156
$168
$204
$238
$268
$310
MALECOUPLING
$18
$18
$18
$26
$26
$28
$30
$34
$40
$46
$52
$56
$62
$70
$74
$82
$86
$96
$106
$110
$120
$132
GORELOCKElbow 45°1.5 Rad.
$34
$40
$46
$52
$58
$64
$74
$78
$88
$106
$124
$146
$182
$220
$300
$360
$436
$516
$588
$708
$828
$948
GORELOCKElbow 90°Full Rad.
$44
$58
$66
$70
$78
$96
$130
$164
$206
$250
$268
$300
$372
$456
$536
$656
$852
$960
$1188
$1344
$1524
$1680
GORELOCKElbow 90°1.5 Rad.
$54
$68
$78
$84
$94
$112
$148
$184
$230
$274
$300
$336
$418
$504
$588
$732
$876
$1080
$1306
$1500
$1680
$1836
SLEEVEDDAMPER
$60
$62
$64
$68
$74
$70
$82
$96
$108
$120
$132
$156
$180
$210
$264
NA
NA
NA
NA
NA
NA
NA
GORELOCKREDUCER
$36
$38
$40
$46
$50
$52
$58
$68
$86
$110
$124
$146
$164
$188
$230
$262
$290
$304
$336
$372
$528
$576
90°TEES
$96
$96
$124
$134
$146
$148
$228
$268
$348
$360
$380
$412
$436
$492
$552
$636
$696
$778
$864
$948
$1140
$1248
22www.TFMelia.com
SPIRAL DUCT AND GASKETED FITTINGS
23
End Cap Coupling
45° Elbow 90° Elbow
Damper with Sleeve TeeReducer
www.TFMelia.com
SIZE
6”
7”
8”
9”
10”
12”
14”
16”
18”
20”
22”
24”
26”
28”
32”
w/o DAMPER
$52
$54
$56
$58
$58
$60
$66
$68
$72
$76
$88
$112
$136
$160
$178
w/ DAMPER
$90
$94
$96
$100
$104
$110
$120
$122
$128
$132
$152
$196
NA
NA
NA
24
SADDLE TAPS
SIZE
6” on 8”
6” on 10”
8” on 8”
8” on 10”
8” on 12”
9” on 12”
10” on 12”
w/o DAMPER
$44
$56
$44
$56
$60
$58
$58
w/ DAMPER
$90
$118
$90
$118
$124
$124
$124
STRAIGHT TAPS
PRICE
$76
$88
$102
$112
$116
$136
$148
$160
SIZE
6”
8”
10”
12”
14”
16”
18”
20”
SHOE TAPS
PRICE
$86
$102
$120
$142
$154
$172
$186
$198
SIZE
6”
8”
10”
12”
14”
16”
18”
20”
w/ DamperGASKETED HETO
w/ Damper
Saddle Tap
Shoe Tap
www.TFMelia.com
Manufacturers represented byT.F. Melia Associates
www.qmarkmep.comElectric Heating Products
Ceiling Fans
www.precisionairproducts.comLaminar & Hepa Diffusers
for Operating Roomsand Clean Rooms
www.pottorff-hvac.comFire Dampers • Fire/Smoke Dampers
Control Dampers • Backdraft DampersLouvers • Duct Silencers
www.raymon-hvac.comSlot Diffusers • Ceiling DiffusersPlenums • Light Troffer Diffusers
Square to Rounds
®
www.seiho.comSpot Diffusers
Round Louvers and Vents
www.solerpalau-usa.comRoof Exhaust Fans • Inline Fans
Ceiling Exhaust FansPropeller Fans • ERV’s
www.titus-hvac.comDiffusers • Registers • Grilles
Vav Terminals • Fan CoilsChilled Beams
www.unitedenertech.comLouvers • Control DampersVavs • Drop Box Diffusers
Remote Operated Dampers
www.warrenhvac.comElectric Duct Heaters
www.kees.comStamped Grilles • Security Grills
Stainless Grilles & DiffusersAccess Doors & Panels
www.indeeco.comCommercial Electric Heaters
Electric Duct Heaters
www.TFMelia.com