gavan-pts 7 - session plan
TRANSCRIPT
-
8/15/2019 Gavan-PTS 7 - Session Plan
1/3
SESSION PLAN
Sector : Information and Communication Technology (ICT)
Qualification Title : Computer Hardware Servicing NC II
Unit of Competency : Maintain Computer System and NetworksModule Title : Maintaining Computer System and Networks
Learning Outcomes:
LO1Plan and prepare for the maintenance of computer systems and networks
LO2 Maintain computer systems and network
LO3 Inspect and test configured/repaired computer system and networks
A.INTRODUCTION
The session is designed for the trainees to develop and understand the knowledge & skills required by the industry
standards in maintaining, configuring computer system and network. The trainees will learn to inspect, test, configure
and prepare computer system. The trainees will master their skills on the previous lessons in computer troubleshooting.
B. LEARNING ACTIVITIES
LO 3: Inspect and test configured/repaired computer system and networks
Learning
ContentMethods Presentation Practice Feedback Resources Time
Maintenance
and service
safety
Self-paced
instruction
Let the trainee read
Information Sheet
4.3-1.
“Maintenance andservice safety”
Let the trainee
answer self-check
No. 4.3.1
Let the trainee
compare his/her
answer to answer
key 4.3-1 “
CBLM
1hr
-
8/15/2019 Gavan-PTS 7 - Session Plan
2/3
Network Cabling
Modular Self-
pacedLet the trainee read
Information Sheet
4.3-2 “Network
Cabling“
Let the trainee
answer Self-
check 4.3-2
Let the trainee
compare his/her
answer to answer
key 4.3-2
CBLM
1hr
VideoPresentation
Let the trainee view the video
presentation on
Network Cabling
Let traineeanswer oral
question ask by
trainer
Let trainerdetermine the
correctness of
the answer
-Laptop-Projector
-DVD Player
-Amplifier
-Speaker
1.5hrs
Demonstration The trainer
demonstrate to the
trainees how to
conduct Network
Cabling
Let the trainees
practice conduct
Network Cabling
with the Task
sheet 4.3-1
Trainee evaluate
performance
using the
performance
check list 4.3-1“Network Cabling”
-UTP Cable
(about 2-5
meters)
-Wire stripper
-Wire cutter
-Crimper
-RJ 45
1.5hrs
Documentation Modular Self-
paced.
Read Information
Sheet 4.3-3
“Documentation”
Let the trainee
answer Self
Check 4.3-3
Let the trainee
compare his/her
answer using self-
check answer key
4.3-3
CBLM 1hrs
C. ASSESSMENT PLAN
Competency should be assessed through demonstration, written test and oral questioning
-
8/15/2019 Gavan-PTS 7 - Session Plan
3/3
D. TEACHER’S SELF-REFLECTION OF THE SESSION
Prepared by: MA. LOUELLA B. GAVAN Reviewed and verified by:
Noted: